Search Results

Search found 1205 results on 49 pages for 'graphic'.

Page 39/49 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Ubuntu 12.10 graphics does not work properly

  - by madox2

  My graphic on ubuntu 12.10 does not work as well as on 12.04. After upgrade I installed driver sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current for my Nvidia 450 GTS graphics card. But sometimes I see slight lag on my videos played in VLC player, some of desktop and window effects are lagging, sometimes I can see an indescribable souce of pixels on my screen at the start of ubuntu and so on. I feel difference between 12.04 and 12.10 in favour of former version. Does anyone know whats wrong or what I am missing? here is output of lspci -k: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Giga-byte Technology Device 1c3a Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Giga-byte Technology Device a000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel modules: i2c-i801 00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTS 450] (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Subsystem: Giga-byte Technology Device e000 Kernel driver in use: atl1c Kernel modules: atl1c

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• Pathfinding for fleeing

  - by Philipp

  As you know there are plenty of solutions when you wand to find the best path in a 2-dimensional environment which leads from point A to point B. But how do I calculate a path when an object is at point A, and wants to get away from point B, as fast and far as possible? A bit of background information: My game uses a 2d environment which isn't tile-based but has floating point accuracy. The movement is vector-based. The pathfinding is done by partitioning the game world into rectangles which are walkable or non-walkable and building a graph out of their corners. I already have pathfinding between points working by using Dijkstras algorithm. The use-case for the fleeing algorithm is that in certain situations, actors in my game should perceive another actor as a danger and flee from it. The trivial solution would be to just move the actor in a vector in the direction which is opposite from the threat until a "safe" distance was reached or the actor reaches a wall where it then covers in fear. The problem with this approach is that actors will be blocked by small obstacles they could easily get around. As long as moving along the wall wouldn't bring them closer to the threat they could do that, but it would look smarter when they would avoid obstacles in the first place: Another problem I see is with dead ends in the map geometry. In some situations a being must choose between a path which gets it faster away now but ends in a dead end where it would be trapped, or another path which would mean that it wouldn't get that far away from the danger at first (or even a bit closer) but on the other hand would have a much greater long-term reward in that it would eventually get them much further away. So the short-term reward of getting away fast must be somehow valued against the long-term reward of getting away far. There is also another rating problem for situations where an actor should accept to move closer to a minor threat to get away from a much larger threat. But completely ignoring all minor threats would be foolish, too (that's why the actor in this graphic goes out of its way to avoid the minor threat in the upper right area): Are there any standard solutions for this problem?

  Read the article

• How to keep a data structure synchronized over a network?

  - by David Gouveia

  Context In the game I'm working on (a sort of a point and click graphic adventure), pretty much everything that happens in the game world is controlled by an action manager that is structured a bit like: So for instance if the result of examining an object should make the character say hello, walk a bit and then sit down, I simply spawn the following code: var actionGroup = actionManager.CreateGroup(); actionGroup.Add(new TalkAction("Guybrush", "Hello there!"); actionGroup.Add(new WalkAction("Guybrush", new Vector2(300, 300)); actionGroup.Add(new SetAnimationAction("Guybrush", "Sit")); This creates a new action group (an entire line in the image above) and adds it to the manager. All of the groups are executed in parallel, but actions within each group are chained together so that the second one only starts after the first one finishes. When the last action in a group finishes, the group is destroyed. Problem Now I need to replicate this information across a network, so that in a multiplayer session, all players see the same thing. Serializing the individual actions is not the problem. But I'm an absolute beginner when it comes to networking and I have a few questions. I think for the sake of simplicity in this discussion we can abstract the action manager component to being simply: var actionManager = new List<List<string>>(); How should I proceed to keep the contents of the above data structure syncronized between all players? Besides the core question, I'm also having a few other concerns related to it (i.e. all possible implications of the same problem above): If I use a server/client architecture (with one of the players acting as both a server and a client), and one of the clients has spawned a group of actions, should he add them directly to the manager, or only send a request to the server, which in turn will order every client to add that group? What about packet losses and the like? The game is deterministic, but I'm thinking that any discrepancy in the sequence of actions executed in a client could lead to inconsistent states of the world. How do I safeguard against that sort of problem? What if I add too many actions at once, won't that cause problems for the connection? Any way to alleviate that?

  Read the article

• Can't boot Ubuntu 12.10 graphics problem

  - by Frantumn

  I can't boot since installing Ubuntu 12.10 When I try to run Ubuntu My computer never gets to the Ubuntu screen with the loading dots. I tried to run in recovery mode with safe graphics (failsafex) When I do this a message pops up saying "the system is running in low graphics mode", If I click okay I am asked what would I like to do and am given four options. I tried running low graphics for one session and then a message appears with a progress bar and says standby one minute while the display restarts. The progress bar never moves and if I click okay the whole process just restarts. I Don't know what to do from here I can't get into the OS. I'm not sure whether the problem is related to compatibility with my laptop monitor or my graphic card nvidia360m I had to install using a safe graphics mode. To learn about how I installed see this link. This link also has information on my computer hardware. Can't install Ubuntu since 10.10 ----UPDATE--- I was able to get into a desktop environment By installing Nvidia-current however it is messy. I have a screen and I am able to see my desktop however there is no unity bar and none of the keyboard controls work. I can right click and create a folder on the desktop and then I can see inside that folder in a traditional browser window. There is still no top menu or unity bar. When I boot normally I don't get into the desktop environment and I get this message in tty 'GPU lockup switching to software FBCON' Okay, I've played around with tips the pages from comments. I've been able to consistantly get into a safemode desktop environment using the xorg & nouveau drivers. I've tried switching between the 5 different options in the Additional Drivers tab in Software Sources. The nVidia (proprietary, tested) driver gets beyond the GPU lockup on a normal boot and actually gets into a Desktop. The issue is then that there is no Unity bar, or top screen menu bar and the resolution is very low. I've tried switching to the (prop, tested) driver and then reinstalling Unity and Ubuntu-Desktop but that didn't work either.

  Read the article

• Cheese won't start

  - by Anthony Hohenheim

  I can't start Cheese Webcam Booth. It starts loading and there is a brief moment when the window shows up but then it disappears, like it shuts itself down and it's not in system monitor. My webcam works perfectly in Skype video call. I installed and run Camorama and it gave me an error: Could not connect to video device (/dev/video0) Please check connection When I run the lsusb I get this line for my webcam: Bus 002 Device 002: ID 04f2:b210 Chicony Electronics Co., Ltd And for my graphic card, running lspci: VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) It's not a pressing matter, but it bugs my nerves, if it works on Skype, why does Cheese and other programs refuse to run. As I said, it's not a big deal but any help would be appreciated. Running Cheese in terminal: (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkHBox to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkHBox to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gdk-WARNING **: The program 'cheese' received an X Window System error. This probably reflects a bug in the program. The error was 'BadDrawable (invalid Pixmap or Window parameter)'. (Details: serial 932 error_code 9 request_code 137 minor_code 9) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)

  Read the article

• Using all Ten IO slots on a 7420

  - by user12620172

  So I had the opportunity recently to actually use up all ten slots in a clustered 7420 system. This actually uses 20 slots, or 22 if you count the clusteron card. I thought it was interesting enough to share here. This is at one of my clients here in southern California. You can see the picture below. We have four SAS HBAs instead of the usual two. This is becuase we wanted to split up the back-end taffic for different workloads. We have a set of disk trays coming from two SAS cards for nothing but Exadata backups. Then, we have a different set of disk trays coming off of the other two SAS cards for non-Exadata workloads, such as regular user file storage. We have 2 Infiniband cards which allow us to do a full mesh directly into the back of the nearby, production Exadata, specifically for fast backups and restores over IB. You can see a 3rd IB card here, which is going to be connected to a non-production Exadata for slower backups and restores from it.The 10Gig card is for client connectivity, allowing other, non-Exadata Oracle databases to make use of the many snapshots and clones that can now be created using the RMAN copies from the original production database coming off the Exadata. This allows for a good number of test and development Oracle databases to use these clones without effecting performance of the Exadata at all.We also have a couple FC HBAs, both for NDMP backups to an Oracle/StorageTek tape library and also for FC clients to come in and use some storage on the 7420.  Now, if you are adding more cards to your 7420, be aware of which cards you can place in which slots. See the bottom graphic just below the photo.  Note that the slots are numbered 0-4 for the first 5 cards, then the "C" slots which is the dedicated Cluster card (called the Clustron), and then another 5 slots numbered 5-9. Some rules for the slots: Slots 1 & 8 are automatically populated with the two default SAS cards. The only other slots you can add SAS cards to are 2 & 7. Slots 0 and 9 can only hold FC cards. Nothing else. So if you have four SAS cards, you are now down to only four more slots for your 10Gig and IB cards. Be sure not to waste one of these slots on a FC card, which can go into 0 or 9, instead.  If at all possible, slots should be populated in this order: 9, 0, 7, 2, 6, 3, 5, 4

  Read the article

• Developing a cloud based app

  - by user134897

  I am a company owner that has developed a cloud based app. My code writer has told me how good he is more than once, well, better stated, he did a good job telling me he was better than everyone else in my rather small community. In the last 18 months I have spent nearly 160,000.00 dollars trying to get this company to the "making money" stage. I am now nearly broke, sitting on the edge of a brilliant marketing plan to launch a much needed cloud based app. We did launch our app last year (late 2013), and the feedback was amazing from the users. One user that signed up to use the free app stated that we needed to call him the moment our company goes public because he wants to be the first to buy stock. Now, here's my problem. We did not originally set out to develop a freemium app, we just sort of ended up there by the natural progression of the app. So, now I have an app that really needs to be scrapped and re-built. Although I do feel my code writer has displayed some brilliance in what he has done, he was extremely weak on graphics and every time we speak he tells me there is a newer better way to code that he is trying to learn. So, here's the million dollar question. Ho do I find code writers that already know the newest, best ways to write code? Or maybe better asked, what is the newest best code writing technique? Second, is it even possible to find code writers that are good at graphics? In short, I am nearly broke and need to start over, but I do not know where to find people qualified to write it good the first time around and display good graphic skills. I am trying to build a team of writers instead of just one person. Maybe 3 good at code and two good at graphics, but I am clueless as to what criteria I should use to determine if I am building the right team members. Please help, I am sure you can tell I am fairly lost by my continued rambling.

  Read the article

• multiple monitor, ATI EyeFinity vs NVidia Mosaic on HDMI

  - by user1531897

  i have been googling much for answer but only someone with real experience can help here. my aim is to have 5 monitors connected to one computer in 2x2 full screen on all 4 monitors (video wall) with same resolution, 4xfullHD for example, plus one -5th monitor as controling. Ati have example picture of this configuration here. I have no gaming nor 3d needs here. Simple desktop applications plus video streams. So because graphic cards for this are expensive, i need to find out before buying pros and cons of 2 possible solutions (1) Ati Eyefinity capable card(s) ...and (2) Nvidia Quadro/NVS card(s) with mosaic and/or nvidia surround technology. For example i can find that current good cards for this can be: Ati's 7870 eyefinity6 card, link here pros: one card can handle all 5 displays, cons: active DP adapters needed (sometimes with aditional usb-powering complication) Nvidia Qudro NVS 450, link here Both cards have DisplayPorts as outputs (my targets are HDMI displays), but as far i saw information is that Eyefinity needs "active DP-DVI/hdmi adapters" for outputs and they are little expensive...? Does nvidia have this limitation (active adapters) ??? And final question, is Ati Eyefinity still better for this purpose than Nvidia-mosaic by someone's real experience there.

  Read the article

• Xorg server won't start after fresh install of Debian 5.04, screen goes blank (Intel Atom D510(Pinet

  - by Kamil Zadora

  Hello, I have installed Debian 5.04 Lenny on my new Intel D510MO motheboard. I fixed some issues with incorrect drive mapping (for some reason during installation my hdd was on sdb, after a restart it is under sda - fixed in grub), and now I am struggling with getting graphical enviroment up and running, I installed the graphical enviroment using the Debian installer. I am not an linux expert by any means, I assume that I need to edit the xorg.conf file. Any hints appreciated! UPDATE1: No change after dpkg-reconfigure xserver-xorg Here is my current xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection UPDATE2: I have installed vnc4server package. I can connect over vnc from my windows 7 laptop and i see empty desktop with terminal window open. Seems that the xserver and gdm are running but they cant talk with my GPU. I am not sure if a can use any gui tool to configure it overthe vnc, as all I see is the terminal window, no taskbars etc. UPDATE3: My current Xorg.0.log http://pastebin.pl/18918 The graphic chipset integrated into the D510 processor is Intel 945GC

  Read the article

• How to easily input and display isolated japanese radicals on MacOS X?

  - by ogerard

  (This question was considered as off-topic on Japanese.SE and more suitable for SuperUser). I like to write computer notes about what I learn in Japanese. From time to time, I would like to be able to include in my text a given radical, say kokoro ?, which takes several graphic forms when used as an element in a more complex kanji, for instance . I did not succeed on my system (Mac OS X 10.7) to find the glyphs for these variants conveniently and exactly as I would like them (I would also be interested about how to do this on Windows 7 or Linux). I first tried the name of the kanji from which the radical is derived. Then I tried to use the japanese name for them, such as risshinben (as in ?) and shitagokoro (as in ?), hoping that the hiragana or katakana input would recognize them and propose me their representation, but it did not work. So I looked into the Full Japanese Character Table, under the "by radical" tab, and found at least a version of each of them : ? (CJK 5FC4) and ? (CJK 38FA) with the correct kun readings. I have them now as favorites but do I need to do that for all radicals? Do I need to register all of them in a user dictionary? I would imagine that I am not the only one who wants to do use them. Besides, the versions I have found are not suited for all occasions: they are centered on a standard kanji square. If I want them to appear near to a placeholder, or demonstrate their proportion to the rest of a typical kanji, I have to make complicated adjustments, depending on my use and the kind of radical. More generally are there computer tools for japanese dictionary editors and japanese teachers I could use on Mac OS X? (I could not add relevant tags such as : japanese or ideogram, please feel free to edit)

  Read the article

• Asus P5Q doesn't post at all

  - by Sebi

  I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

  Read the article

• Tools to (privately) annotate/markup a website for maintenance

  - by rob

  I've been tasked with updating a website. Rather than proofreading and updating each page (one at a time), I want to make a single pass over the entire website, marking graphics/images/videos that need to be rewritten, removed, or updated. I thought about taking screenshots, marking those up, and putting them in our bug-tracking database, but that seems like an extremely tedious solution. Some of the content is similar on various pages across the website, and the entire site itself is localized into several languages (so any changes made to the English version will have corresponding changes for other languages). I also want all of my markup to remain private (that is, if it's stored online somewhere, I should be the only person who can see my comments). I found an article that lists several website annotation services, but it's not clear whether they allow private annotations, or whether these tools are even appropriate for website maintenance (many of them look more geared toward social networking). I've started making a list of some necessary and desired features below, and may add more as necessary. Annotations/markup/comments remain private (only visible to me) Comment history/tagging (so I can reuse the same comment for shared footers, items requiring similar updates, etc.) Ability to print/export a list or report of all comments for the entire website Ability to produce a categorized list of changes (e.g., to produce a list of images that need updating, which I can send to the graphic designer) What processes and tools do you use to keep track of all the changes that need to be made to a website? What features are painfully absent from the tools you use?

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in? Update I found the following in the manual off ASUS's website, which confirms my original suspicion that HDMI and DVI can't be used at the same time. But I'd still like to know if it's possible through software to switch between using the HDMI and DVI.

  Read the article

• Mouse click-focus wanders in vmPlayer 3.0 dual-monitor

  - by Gary M. Mugford

  Previously, a WinXPSP3 session running on a WinXPSP3 host computer ran perfectly fine in a dual monitor setup. No issues with vmPlayer 2.x. BEFORE updating to vmPlayer 3, the following problem cropped up. When clicking in a single monitor, you would get exactly what you expected. However, when the display was stretched across two monitors, the clicking would be to the left of the mouse cursor. The farther RIGHT you were, the farther left the click would occur. In other words, if you clicked on the system menu of a window in the upper left of a window on the left monitor, you would get the system menu. Move half a screen to your right and the click would be on an item about a quarter of the way over, rather than where you were clicking. And by going all the way to the far right of the right monitor, you could bring up a right-click menu on the far right of the LEFT monitor. I Hope I have described this properly. It's confusing, even in words. In single monitor mode, everything works perfectly fine. If, instead of using either UltraMon or DisplayFusion, you run a single desktop across both monitors (3200x1600), there are no mousing issues. Unfortunately, having two 1600x1200 monitors, that depth of 1600 makes that hack less than useable. My graphic card won't offer anything resembling 3200x1200. vmPlayer 3.0 did not alleviate the situation. The microsoft mouse drivers are up to date and so are the nVidia card drivers. Any ideas?

  Read the article

• Least CPU intensive way of streaming your screen on windows?

  - by sinni800

  Hello, sometimes I like capturing my screen for others to see. Only thing: I am playing games while I do it. I have tried a few streaming solutions where Windows Media Encoder coupled with my own Windows server appealed to me most, because I can change resolutions, etc. I also tried ustream coupled with the Flash applet and the Adobe Flash Encoder recording a Camtasia source. Camtasia has the disadvantage though that it shows the green-and-black-alternating borders and can not be targeted fullscreen. I like how xfire does it. But it doesn't work with every game, many are simply not supported. A few thoughts about this: Is there a program which captures like Fraps or XFire (based on Direct3D and OpenGL outputs) and exposes the output to a DirectShow source filter? Which brings me to: Is there hardware accelerated capturing directly from the graphics card? Maybe including direct encoding with help from OpenCL? Modern graphic cards decode BluRay content directly for example. I should have a modern enough graphics processor for this to be possible (see below). If using Windows Media Encoder: Which are the least CPU intensive settings? Which codec? Is there a newer codec than Windows Media 9? Is it less CPU intensive? I only have 7, 8 and 9 inside the Encoder Could the performance be massively increased by having a Quad-Core CPU (see below)? Bandwidth is no problem up to 1000 to 1500 kbit/s (I have 2048). My Computer specs: Intel Core 2 Duo E8400 4 GB DDR2-800 Ram Ati Radeon HD5770 Using Windows 7 Professional

  Read the article

• Windows 7 64bits installation via USB asks for drivers

  - by Shikiryu

  I just bought a new config ( ASUS p8z68-v lx, i5-2500k + ram and new graphic card ). Coming back and installing it in my old computer, I just saw that my DVD player was on IDE (yup…). So, I needed to install windows 7 64bits from my usb key. Fine, I made my usb key bootable and copy the official DVD on it (the same version that was on my old computer), set BIOS to boot on it first and started the computer up. It worked fine until it asks me for cd/dvd drivers (which is funny since, I do it via USB because I can't plug in my DVD player :D) I have 3 SATA HDD plugged in and that's it. I made a small google search and found that it could be SATA or RAID drivers. Fine, I took another USB KEY and put all my motherboard drivers on it (from the CD sold with the MB) and none of those drivers seemed to work. I tried downloading new drivers from ASUS website and same effect. Any idea but no "buy a new DVD player", I'm now broke for the month :) ?

  Read the article

• Page pool memory

  - by legiwei

  I'm currently using Windows XP SP3 32 bit, using C2D E6320 with 2GB RAM. When I am playing Starcraft 2, I encounter an error where it says my system is running low on page pool memory. Starcraft graphic settings suggested a high settings for me. I do not think it has to do with my GC but with my RAM. I then made a search to try to rectify the problem. Apparently, it's something to do with my virtual memory. I then proceed to try to the suggested solution which is to temper the registry and limit the page pool memory to 384MB. However, having done so, I still could not achieved it. I've seen screenshot settings of windows XP with 2GB having 384MB of page pool memory. My default settings puts it at 195MB whereas when I try to increase the pool limit, it can only go to a max of 229MB. I tried increasing my RAM capacity to 3GB but the pool limit still remains. I like to know how to increase my page pool memory. I've tried searching for solution but to no avail other than the one that I've mentioned above (which didn't solve my problem completely).

  Read the article

• Choosing a new laptop

  - by chiongms

  I'm looking for a new laptop. I saw few: i) HP ProBook 4321s ii) HP ProBook 6440b iii)Dell Latitude E6410 i found these laptops are still very new..is it? not much comments about them. can anyone help? i doubt how their graphic cards perform compare to each other? ProBook 4321s- Radeon HD4350 ProBook 6440b- Radeon HD4550 Latitude E6410- NVS 3100M most of the time i'll running 3D CAD software, C++ programing...i saw my friend's laptop with radeon HD4350. it's perfectly fulfilling my demand. but i wonder how the other two are? Another thing i doubt is the screen resolution..my current laptop is 1280x800, and i found it comfortable to use. But these two HP only offer 1366x768..will it make any large different? Lastly, is there anyway to estimate how their power consumption is from the spec sheet? well, i would prefer one with longer battery usage time. my current laptop is suck...only last 1 hour even when it's still new..i'm not going to get another like this anymore. Anyone can help me please? Thanks!

  Read the article

• After update to Windows 8.1 brigthness isn't working (changing)

  - by Bibo

  I just update my Windows 8 to Windows 8.1 by Windows Store and I have some problems. My notebook is Acer Aspire Timelinex 3820TG and I know it's little old for Windows 8 but I install them and works fine (I updated my HDD to SSD). Now I just updated Windows and I have problem with changing brightness on my dedicated graphic card (Ati HD 5650). First I can changing brigthness with fn + keys but It just changing level in OS. No change in real. I tried reinstall drivers, install drivers for my card from Acer with compatibility to Windows 7 and without change. When I switch to integrated card changing brightness works. I think the problem is with drivers but I don't know how to get it working. Thanks for help Bonus question: I have another problem (but this one is not so important). Does anyone knows what msietxghh.exe is doing? Everytime when my system runs (after update) I get message that this program stops working but I just cancel and looks everything works fine.

  Read the article

• Why does the screen resolution of 1440x900 suddenly disappear from Intel GMA Control Panel?

  - by GeneQ

  I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2. I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've goggled this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

  Read the article

• How to calculate RAM value on performance per dollar spent

  - by Stucko

  Hi, I'm trying to make decisions on buying a new PC. I have most specifications (processor/graphic card/hard disk) pin-downed except for RAM. I am wondering what is the best RAM configuration for the amount of money I'm spending. As the question of best is subjective, I'd like to know how would I calculate the value of RAM sticks sold. 1.(sample)The value of amount of memory: 1) CORSAIR PC1333 D3 2GB = costs $80 2) CORSAIR PC1333 D3 4GB = costs $190 would it be better to buy 2 of item 1) instead of 1 of item 2) ?? Although I would normally choose to have 1 of 2) as the difference is only (190-(80*2)) = 30 as I would save 1 DIMM slot, What I need is the value per amount: 1) 80/ 2 = $40 per 1GB 2) 190/ 4 = $47.5 per 1GB 2. The value of frequency: 1) CORSAIR PC1333 4GB = costs 190 2) CORSAIR PC1600C7 4GB = costs 325 Im not even sure of the denominator ... $ per 1 ghz speed? 3. The value of latency: 1) CORSAIR CMP1600C8 8-8-8-24 2GBx3 (triple channel) = costs 589 2) CORSAIR CMP1600C7D 7-7-7-20 2GBx3 (triple channel) = costs 880 Im not even sure of the denominator ... $ per 1 ghz speed? Just for your information i'd like to get the best out of the money im going to spend to put on a 6 DIMM slot i7core motherboard.

  Read the article

• Hardware issue: computer plays beep sounds at startup, and then turns off

  - by Darkkurama

  Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >