Search Results

Search found 1211 results on 49 pages for 'lie ryan'.

Page 39/49 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• random hard disk errors

  - by AugB

  For the past 2 years or so (4 year old custom build) I've been getting random moments where everything stops responding (or takes a very long time to respond) followed by I/O and hdd not detected errors on restart. To fix it, all I usually need to do is unplug my SATA cables from the hdd and mobo and plug them back in again and the problem disappears, at least for a little while (it ranges anywhere from a day to a few months time). Sometimes even a startup repair does the job. I've done multiple reformats and have also ran chkdsk more times than I can remember and both do not seem to help in the long run. Both the drives seem to be exhibiting the same problem. Have both my hdds been "dying" for the past couple of years, even though they are fully functional besides these occasional hiccups? Does the issue lie elsewhere? All feedback is appreciated. System specs: Biostar Tpower i45 mobo 2x WD Caviar 640GB hdds Zalman 750w psu Radeon 5870 gpu 2x2gb Gskill DDR2 ram Win7 64

  Read the article

• Introducing Kiddo: A Ruby DSL for building simple WPF and Silverlight applications

  - by fdumlao

  Read the original article here... As a long time Ruby lover and deep rooted .NET supporter, I was probably more psyched than anyone I knew when IronRuby 1.0 was finally released. I immediately grabbed and started building some apps with it to see where the boundaries were going to lie between IronRuby and ruby.exe, and so far I've been pleasantly surprised by how many things just work as I'd expect. I then started to try out some of my favorite libs that I was sure would not work with IronRuby, and I wasn't surprised at all when _why's amazing Shoes library didn't work. Being somewhat familiar with Shoes (it's a great DSL for building simple UIs in Ruby) I felt it wouldn't be that difficult to port it over and as it turned out, someone else had already started the work. As cool as this was, I was never quite satisfied with good 'ol shoes. While it was quite complete, it lacked simple extensibility points, and although easy, it wasn't quite "kid friendly". At the same time on the .NET side of the fence, IronRuby could easily compile XAML to create WPF and Silverlight UIs, but trying to do it declaratively in plain Ruby was no fun at all. And so, the Shoes-inspired, WPF/Silverlight GUI DSL was born. (and it lives here: http://bitbucket.org/fdumlao/kiddo/src) Introducing Kiddo Tell you what. Let's start with a quick code example first. We'll build a useful app that we can use to quickly reverse strings whenever we need it. Read the complete article here...

  Read the article

• What free Remote Desktop (server) solutions are there?

  - by Tao

  I know Ubuntu comes with a "Remote Desktop" option that appears to be a straightforward VNC server, and I'm trying to understand the alternatives. Here are the possibilities I've heard about so far: VNC VNC + SSH Tunnelling NX Server, free edition FreeNX NeatX X2Go X11 Forwarding over SSH xrdp I'm coming at this from a Windows user's perspective: To the best of my experience, RDP (aka Terminal Services) is a reasonably secure (barring mitm/server spoofing), efficient desktop sharing protocol with well-supported clients, that can be exposed to the internet when necessary without major fears of intrusion. To the best of my knowledge straight VNC is none of those things, which is where I get confused - why wouldn't a better desktop sharing technology be developed or used in the open-source world? I know VNC can be wrapped with SSH, but that seems beyond the reach of a casual user. X11 forwarding over SSH may be more or less efficient, I have no idea, but is definitely even more complicated, and doesn't (as far as I know) give you access to already-running stuff (no desktop sharing as such, just remote application running). So, I'd like any feedback/preferences amongst these or any other "Free" desktop sharing options, using these criteria and/or any others: Security (esp. for access across internet) Efficiency (bandwidth usage, responsiveness, etc) Free-ness, as in Speech (not sure where RDP or FreeNX lie for this) Free-ness, as in Beer (are there any commercial solutions with usable dependable free offerings?) Ease of use (server and client side) Cross-OS Client availability Cross-OS Server availability Support for independent sessions and shared (and/or "Console") sessions Ongoing support/maintenance/development Thanks!

  Read the article

• Java - System design with distributed Queues and Locks

  - by sunny

  Looking for inputs to evaluate a design for a system (java) which would have a distributed queue serving several (but not too many) nodes. These nodes would process objects present in the distributed queue and on occasion require a distributed lock across the cluster on an arbitrary (distributed) data structures. These (distributed) data structures could potentially lie in a distributed cache. Eliminating Terracotta (DSO),Hazelcast and Akka what could be alternative choices. Currently considering zookeeper as a distributed locking mechanism. Since the recommendation of a znode is not to exceed the 1M size , the understanding is that zookeeper should not be used a distributed queue. And also from Netflix curator tech note 4. So should a distributed cache, say like memcached, or redis be used to emulate a distributed queue ? i.e. The distributed queue will be stored in the caches and will be locked cluster-wide via zookeeper. Are there potential pitfalls with this high-level approach. The objects don't need to be taken off the queue. The object will pass through a lifecycle which will determine its removal from the queue. There would be about 10k+ objects in a queue at a given time changing states and any node could service one stage of the object's lifecycle. (Although not strictly necessary .. i.e. one node could serve the entire lifecycle if that is more efficient.) Any suggestions/alternatives ? sidenote: new to zookeeper ; redis etc.

  Read the article

• Would You Pay for Smartphone OS Updates? [Poll]

  - by Jason Fitzpatrick

  For most phone ecosystems, manufacturer/carrier provided updates are few and far between (or outright nonexistent). To get access to mobile OS updates, would you open your wallet? While iPhone users are used to regular (and free) OS updates, the rest of us our largely left out in the cold. Over at ExtremeTech, Ryan Whitwam argues that we should be willing to pay for smartphone OS updates. The core of his argument is updates cost money and there is no financial incentive for carriers like Sprint and Verizon to turn back to their supplies (say, Motorola or LG) and pay them to provide an update pack for a phone they stopped selling last quarter. He writes: It might be hard to swallow, but the manufacturer of your phone is out to make money for its shareholders. The truth of the matter is that you’re not even the customer; the carrier is. Carriers buy thousands of phones at a time, and unless the carrier wants an update, there won’t be one because there is no one else to pay for it. Imagine if, instead of burning money for little or no benefit, an OEM actually had a financial incentive to port ICS to its older devices. Instantly, the idea of updating phones goes from the customer service back-burner to the forefront of a company’s moneymaking strategy. If the system proves a success, carriers could get involved and have a taste of the update fees as compensation for deploying the update over the air. This is more viable now than ever before thanks to the huge number of Android phones in the market. Samsung, for example, has sold over 30 million Galaxy S II phones since last summer. It has just started rolling Android 4.0 updates out to some countries, but most users are still waiting. If it charged just $10 for access to the update, that would be $150 million if only half of all users wanted an official update. Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header? The How-To Geek Guide to Getting Started with TrueCrypt

  Read the article

• Future Air Plane – A new world

  - by Rekha

  For the first time in my life, I wished I had more number of years to live. The world has evolved from the cave man life to the man who is almost The Creator. When I was about 12 years old, I was taken to Chennai Planetarium for my school excursion. That day we were made to lie down in a dark room and the ceiling was full of stars and planets. All those were just videos but the day still stands in my mind. Same kind of experience in real is waiting for our future generations.Even though the English movies have gone beyond imaginations, we still have chances to bring those imaginations to real. You must be wondering why all these hype. Recently Airbus unveiled a news on transparent Airplane in 2050. This Airplane will have a body transparent to view the sky from all sides of the airplane when we are flying high above the grounds. And it will have all possible technologies under one roof that would give immense pleasure for the passengers. The journey would be an unforgettable one for each one of us. Image and News Credit: Daily Telegraph This article titled,Future Air Plane – A new world, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Pub banter - content strategy at the ballot box?

  - by Roger Hart

  Last night, I was challenged to explain (and defend) content strategy. Three sheets to the wind after a pub quiz, this is no simple task, but I hope I acquitted myself passably. I say "hope" because there was a really interesting question I couldn't answer to my own satisfaction. I wonder if any of you folks out there in the ethereal internet hive-mind can help me out? A friend - a rather concrete thinker who mathematically models complex biological systems for a living - pointed out that my examples were largely routed in business-to-business web sales and support. He challenged me with: Say you've got a political website, so your goal is to have somebody read it and vote for you - how do you measure the effectiveness of that content? Well, you would. umm. Oh dear. I guess what we're talking about here, to yank it back to my present comfort zone, is a sales process where your point of conversion is off the site. The political example is perhaps a little below the belt, since what you can and can't do, and what data you can and can't collect is so restricted. You can't throw up a "How did you hear about this election?" questionnaire in the polling booth. Exit polls don't pull in your browsing history and site session information. Not everyone fatuously tweets and geo-tags each moment of their lives. Oh, and folks lie. The business example might be easier to attack. You could have, say, a site for a farm shop that only did over the counter sales. Either way, it's tricky. I fell back on some of the work I've done usability testing and benchmarking documentation, and suggested similar, quick and dirty, small sample qualitative UX trials. I'm not wholly sure that was right. Any thoughts? How might we measure and curate for this kind of discontinuous conversion?

  Read the article

• Programming by dictation?

  - by Andrew M

  ie. you speak out the code, and someone else across the room types it in Anyone tried this? Obviously the person taking the dictation would need to be a coder too, so you didn't have to explain everything and go into tedious detail (not 'open bracket, new line...' but more like 'create a new class called myParser that takes three arguments, first one is...'). I thought of it because sometimes I'm too easily distracted at my computer. Surrounded by buttons, instant gratification a click away, the world at my fingertips. To get stuff done, I want to get away, write my code on paper. But that would mean losing access to necessary resources, and necessitate tedious typing-up later on. The solution? Dictate. Pros: no chance to check reddit, stackexchange, gmail, etc. code while you pace the room, lie down, play billiards, whatever train your brain to think more abstractedly (have to visualize things if you can't just see the screen) skip the tedious details (closing brackets etc.) the typist gets to shadow a more experienced programmer and learn how they work the typist can provide assistance/suggestions external pressure of typist expecting instructions, urging you to stay focussed Cons might be too hard might not work any better rather inefficient use of assisting programmer need to find/pay someone to do this

  Read the article

• E3 Booth Babes Display a Painful Lack of Video Game Knowledge [Video]

  - by Jason Fitzpatrick

  If you thought a prerequisite for manning a booth at an electronics expo was a passing knowledge of the electronics and games you were promoting, you were wrong. In the above video Chloe Dykstra puts a set of “booth babes” from the E3 2011 conference to the test by asking them simple questions about video games both new and old. If you’re a gaming fan and you can watch this video without laughing out loud you’ve got an iron will (or you’re shaking your head in disbelief that someone could work a gaming convention and not know the answers to these questions). We won’t lie, we were shaking our head when the one model admitted that she’d worked at GameStop for a year and still didn’t know any of the answers. What questions would you put on list? How about “Finish this sentence: ‘Your Princess is in another…’”, “Dimension?”. 5HP: Booth Babe Edition – E3 2011 [YouTube via Kotaku] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

  Read the article

• Where is it permissible to add logging code in a MVC model?

  - by BDotA

  Working on a C# WinForms program that is written in a MVC ( actually Model-View-Presenter) style and I want to add a few lines of code that is responsible for logging some events. Where should I write two or three lines of code that I need? Should I write it in the Presenter section? To get an idea, here is some lines of sample code that already exists in the Save() metohd in Company.MyApplication.Presenter.MyPresenter.cs class: he has written codes lie the following in this part of presenter: private void Save(Helper.SaveStatusEnum status) { if (notification.CheckLocks(orderIdCollection)) { using (new HourglassController()) { controller.FireActiveCellLeaving(); ViewDocumentedValues(); int result = saveController.Save(status); if (result == Helper.SAVE_SUCCESSFUL) { // IS IT OK TO WRITE MY COUPLE LINES OF CODE IN HERE??????????? model.Dirty = false; if ((model.CurrentStatus == Helper.OrderStatusEnum.Complete) || (model.CurrentStatus == Helper.OrderStatusEnum.Corrected)) { controller.EnableDisableSheet(false); } CheckApplicationState(); SheetHelper.ClearUnsavedDataRowImage(view.ActiveSheet); } else { MessageBox.Show("An unexpected error occuring trying to save."); } } } }

  Read the article

• What to do when you're the interviewer and you don't like your job?

  - by emcb

  I'm in a sorta strange predicament, and I could use some advice. When I was interviewing for my current job, the job description I was given seemed pretty darn nice to me. Without going into the details, the job hasn't quite turned out the way it was advertised. The company is great and takes care of its employees, but for someone who cares about the code they write and the work they do, it's a bad environment - effectively, we operate between 0.5 and 1.0 on the Joel test, and due to political issues we're not going to move beyond that any time soon. Bitter? Maybe. OK...so I'm in the market for a new job. But that's not where my dilemma is. The problem that I see coming is that I will be participating in interviewing some candidates for a position on my team, and I'm not sure what to do. I've heard through the grapevine that we have some really solid, promising, fresh-out-of-college prospects coming in to interview, and I honestly dread the thought of somebody having their first experience of engineering in this department. So I'm wondering: what should I do if/when the interviewee asks me "Do you like your job?" (no) "What kind of projects would I be working on?" (mostly static HTML/CSS changes) Anything else that would elicit a negative answer if told truthfully Do I tell the truth, to give the candidate a real picture of the job? What if this scares them away, and what if it gets blamed on me? Do I fib or lie, saying we work on exciting projects with lots of flexibility, like the pitch my boss will give when the reality is quite different? Should I feel any kind of moral responsibility to let a promising young developer know that this isn't the job for them, or should I shut up and be loyal 100% to the company? Any approaches or advice is appreciated. I hope I don't come across as overly dramatic - I honestly struggle with this question.

  Read the article

• Rendering different materials in a voxel terrain

  - by MaelmDev

  Each voxel datapoint in my terrain model is made up of two properties: density and material type. Each is stored as an unsigned integer value (but the density is interpreted as a decimal value between 0 and 1). My current idea for rendering these different materials on the terrain mesh is to store eleven extra attributes in each vertex: six material values corresponding to the materials of the voxels that the vertices lie between, three decimal values that correspond to the interpolation each vertex has between each voxel, and two decimal values that are used to determine where the fragment lies on the triangle. The material and interpolation attributes are the exact same for each vertex in the triangle. The fragment shader samples each texture that corresponds to each material and then uses the aforementioned couple of decimal values to interpolate between these samples and obtain the final textured color of the fragment. It should work fine, but it seems like a big memory hog. I won't be able to reuse vertices in the mesh with indexing, and each vertex will have a lot of data associated with it. It also seems pretty slow. What are some ways to improve or replace this technique for drawing materials on a voxel terrain mesh?

  Read the article

• Do we have enough time to build an electric car future?

  - by julien.groues

  A recent article from Greenbang has posed the question 'Do we have enough time to build an electric car future?'. The writer discusses that, although the future of transport might lie with electric cars, there is concern regarding whether we'll be able to build the market and infrastructure required to support them, before carbon and oil constraints create difficulties in powering the vehicles. Of course, the increasing use of Electric vehicles (EVs) is going to put excessive pressure on energy grids, as large volumes of electricity will need to be directed to charging points, which in turn must handle fluctuating demand at peak times. EVs are increasing in popularity as a sustainable method of transport to reduce carbon consumption, and electric utilities will have the opportunity, and the challenge, to quickly determine the best methods to fuel these vehicles and accommodate the associated increases in demand for energy. Critically, efficient software is required to provide diagnostic and predictive capabilities related to EV refuelling - for example, anticipated electricity flow will need to be addressed as the number of EVs on the road increases, and electricity will need to be directed to specific areas on-demand as vehicles attempt to recharge en-mass. But a smart grid infrastructure can meet these demands, intelligently. The implementation of a smart grid is not in the distant future, it is an achievable reality for utilities via simple installation of new software and technologies, which can be done incrementally for those facing existing legacy systems or concerned with upfront costs. The smart grid is integral to the monitoring and control of energy use as well as the future-proofing of the energy grid. A smart grid will be critical to meeting the electricity requirements of new EVs and will ensure their successful deployment by providing a reliable foundation for the data handling required to record and manage electricity distribution - from recording and assessing energy usage, to analysing data and sharing information with consumers via green billing. http://www.greenbang.com/do-we-have-enough-time-to-build-an-electric-car-future_14248.html

  Read the article

• Cat 6 Only 100mbit speed

  - by Stu2000

  I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

  Read the article

• Algorithm to reduce calls to mapping API

  - by aidan

  A random distribution of points lies on a map. This data lies behind an API, and I want to grab the complete set of points within a given bounding box. I can query the API with the bounding box and the API will return the set of points that fall within that box. The problem is that the API will limit the result set to 10 items, with no pagination and no indication if there are more points that have been omitted. So I made a recursive algorithm that takes a bounding box and requests the points that lie within it. If the result set is exactly 10 items, then I split the bounding box into four quadrants and recurse. It works fine but my question is this: if want to minimize the number of API calls, what is the optimal way to split the bounding box? Splitting it into quadrants was just an arbitrary decision. When there are a lot of points on the map, I have to drill down many levels before I start getting meaningful results. So I imagine it might be faster to split the box into, say, 9, 16, or more sections. But if I do that, then I eventually get to a point where a lot of requests are returning 0 results which isn't so efficient. Also, does the size of the limit on the results set affect the answer? (This is all assuming that I have no prior knowledge of nominal point density in the bounding box)

  Read the article

• Book Review&ndash;Getting Started With OAuth 2.0

  - by Lori Lalonde

  Getting Started With OAuth 2.0, by Ryan Boyd, provides an introduction to the latest version of the OAuth protocol. The author starts off by exploring the origins of OAuth, along with its importance, and why developers should care about it. The bulk of this book involves a discussion of the various authorization flows that developers will need to consider when developing applications that will incorporate OAuth to manage user access and authorization. The author explains in detail which flow is appropriate to use based on the application being developed, as well as how to implement each type with step-by-step examples. Note that the examples in the book are focused on the Google and Facebook APIs. Personally, I would have liked to see some examples with the Twitter API as well. In addition to that, the author also discusses security considerations, error handling (what is returned if the access request fails), and access tokens (when are access tokens refreshed, and how access can be revoked). This book provides a good starting point for those developers looking to understand what OAuth is and how they can leverage it within their own applications. The book wraps up with a list of tools and libraries that are available to further assist the developer in exploring the APIs supporting the OAuth specification. I highly recommend this book as a must-read for developers at all levels that have not yet been exposed to OAuth. The eBook format of this book was provided free through O'Reilly's Blogger Review program. This book can be purchased from the O'Reilly book store at: : http://shop.oreilly.com/product/0636920021810.do

  Read the article

• When is it better to offload work to the RDBMS rather than to do it in code?

  - by GeminiDomino

  Okay, I'll cop to it: I'm a better coder than I am at databases, and I'm wondering where thoughts on "best practices" lie on the subject of doing "simple" calculations in the SQL query vs. in the code, such as this MySQL example (I didn't write it, I just have to maintain it!) -- This returns the username, and the users age as of the last event. SELECT u.username as user, IF ((DAY(max(e.date)) - DAY(u.DOB)) &lt; 0 , TRUNCATE(((((YEAR(max(e.date))*12)+MONTH(max(e.date))) -((YEAR(u.DOB)*12)+MONTH(u.DOB)))-1)/12, 0), TRUNCATE((((YEAR(max(e.date))*12)+MONTH(max(e.date))) - ((YEAR(u.DOB)*12)+MONTH(u.DOB)))/12, 0)) AS age FROM users as u JOIN events as e ON u.id = e.uid ... Compared to doing the "heavy" lifting in code: Query: SELECT u.username, u.DOB as dob, e.event_date as edate FROM users as u JOIN events as e ON u.id = e.uid code: function ageAsOfDate($birth, $aod) { //expects dates in mysql Y-m-d format... list($by,$bm,$bd) = explode('-',$birth); list($ay,$am,$ad) = explode('-',$aod); //Insert Calculations here ... return $Dy; //Difference in years } echo "Hey! ". $row['user'] ." was ". ageAsOfDate($row['dob'], $row['edate']) . " when we last saw him."; I'm pretty sure in a simple case like this it wouldn't make much difference (other than the creeping feeling of horror when I have to make changes to queries like the first one), but I think it makes it clearer what I'm looking for. Thanks!

  Read the article

• What is the target of Unity?

  - by burli

  First Unity was developed for Netbooks. But the Netbook Market is shrinking. Unity is not specialized for tablet pcs like Android 3, but it may work well with some specialized Apps for those devices. Unity is still nice for Notebooks with small displays, but there is no big advantage on the desktop compared with other desktop environments like Gnome 2/3 or KDE. So what's the point? My first suggenstion was a hybrid between tablet pc and a desktop, for example for a manager. He can plug the tablet in a docking station in his office and he can work at a normal desktop, whats not possible with iOS or Android. If he is in a meeting he can use it as a tablet to make notes, for example. Or if he is somewhere else outside the office or the company. Same for normal users. They can dock the tablet and use it like a normal desktop pc or they can lie on the couch and browse in the web, read a book or chat with friend. So, thats my suggestion. But what is the real plan for Unity or Ubuntu in general? I'm curious ;)

  Read the article

• Laptop runs HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• OUCH! Laptop running SUPER HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu editions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! (left side of terminal) (right side of terminal) This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• Should CV contain cases where certain party fools me and not pay salary? Is it "holiday" time or not?

  - by otto

  Suppose I am fooled to work in a start-up or a company that has been a very small over a long time, let say 10 years. I work them 3 months and I really enjoy the work -- I learn a lot of new skills such as Haskell, MapReduce, CouchDB and many other little things. Now the firm did not pay any salary: A) I may be unskilled, B) I did not meet some deadline (I don't know because I am not allowed to speak to the boss but I know that I am not getting any payment) or C) I was fooled. Some detail about C I heard that the firm have had similar cases from my friend, "The guy X was there and he said he does not trust the firm at all so he went to other firm". I don't know what the term "trust" mean here, anyway the firm consists of ignorant drop-outs that hires academic people, a bit irony. They hire people from student-organizations and let them work and promise ok -compensation but -- when you start working the co-employer starts all kind of instructions "Do not work so hard, do not work so long, do not work so much" -- it is like he is making sure you do not feel sad when he does not pay any salary (co-employer is an owner in the firm). Anyway, I learnt a ton in the company but it was very inefficient working. I worked only alone, not really working in a "company". Now should by resume contain references to the firm and the guy who did not pay me anything? Or should my resume read that I worked in XYZ -technologies -- but 1 year's NDA -- what can write here? Now I fear that if I put the firm to my resume: they will lie about my input to my next employer. I feel they are very dishonest. On the other hand, I want to make it sure that I have worked over the time. So: Should my CV contain the not-so-good or even awful employers that may be fooling people to work there? I am pretty sure everyone knows the firm and its habbits, circles are small but people are afraid to speak.

  Read the article

• Virtualbox install 12.04 guest: "pae not present"

  - by Peter.O

  I get this message while trying to install Ubuntu 12.04 as a guest in VirutalBox 4.1.18, on an Ubuntu 10.04 host. This kernel requires the following feature not present on the CPU: pae Some host specs: The host's kernel is: Linux 2.6.32-41-generic-pae GNU/Linux lscpu (host): Architecture: i686, CPU op-mode(s): 32-bit, 64-bit grep --color=always -i PAE /proc/cpuinfo   does show pae in its output. The 12.04 iso used is: ubuntu-12.04.0-desktop-i386.iso As a comparison/check, I downloaded and installed Linux Mint 13 Cinnamon to the same host on the exact same VM (I just changed the .iso image). It worked fine. Its iso is: linuxmint-13-cinnamon-dvd-32bit.iso It seems (to me) that I have pae.. what is going on here? Update: I had assumed that Linux Mint also required pae (being Ubuntu based), but I've just run;   grep --color=always -i PAE /proc/cpuinfo   in the Mint VM.   It showed no output.   So it seems the issue may lie with VirtualBox.   If that is the case, how can I get Virtualbox into pae mode?

  Read the article

• Korea&rsquo;s Anti Abortion / Pro Life Movement

  - by Randy Walker

  The South Korean government is in dire straits.  The national birth rate continues to decline and as the population grows older, there aren’t enough children being born to support the country long term.  The social issues of post Korean War are coming back to haunt the empowered nation.  Being torn apart by the Korean War (nicknamed the forgotten war in America) and with a nation facing starvation, South Korea allowed hundreds of thousands of their children to be adopted abroad.  This has created a problem of epidemic proportions, essentially devaluing life in Korea and child rearing. In an effort to encourage birth rates, the government encouraged their workers to go home early and procreate by turning off the lights in buildings.  Something unknown to me, was the illegalization of abortion except in special cases. According to the this article, http://joongangdaily.joins.com it’s working.  Abortions are down and women are being encouraged to give birth.  However the flip side is illegal risky abortions are on the rise, with potential back alley abortions looming.  But with a nation facing it’s potential implosion, it has to continue it’s efforts to encourage mothers to give birth. Many of the issues that America has faced is in stark contrast to South Korea.  Abortion has been a generally accepted procedure for some time.  If you’ll recall, I mentioned South Korea devalued their children.  But the nation’s problems lie so much deeper.  Being an Asian nation, saving “face” is an important aspect of life.  And being an unwed mother disgraces the family.  Living as a single mother in South Korea is a difficult life.  Most married mothers stay at home to take care of the children.  Being a shunned single mother that has a hard time getting a job (because you are a single mother) and affording child care isn’t like life in America. If we in the states suddenly faced a birthrate crisis, what would the U.S. government do?

  Read the article

• How do i impress employers with my resume?

  - by acidzombie24

  I built a entire website from scratch in 10days which looks and feels professional with the site being unique. The site has features like logging in, sending activation emails, tag/content search (lucence.net), syntax highlighting (prettify) and a diff (one of the js diffs), markup for comments all on this site and autocomplete in a textbox (remember, 10days). I wrote i have 5+ years of C# experience (i could lie and say more but smart employers will know its only 8 years old and 1.1 is very different from what we use now). I had employers REPEATEDLY say they are looking for someone who has more C# experience... wtf. Maybe they don't read my CV, maybe they dont believe it or ignore me because i am not yet a graduate. I laughed when i first read Steve Yegge The Five Essential Phone Screen Questions as i knew all of that (although i still never used graph datastruct nor know much about it). I'm pretty sure competency wise i can do the job. I am also positive no one noticed i have markup, a diff, autocomplete nor email activation/forget password (i offer a test user account). So maybe my site/example work isnt impressive bc you dont realize what is in it. In short i dont think they read my CV or notice my site. How do i impress employers? PS: The problem is i dont get to the interview. I had one and ruined it by speaking too technical to the PM because i was nervous. The other 25+ jobs either didnt contact me or was kind enough to send a rejection email.

  Read the article

• What's a good way to check that a player has clicked on an object in a 3D game?

  - by imja

  I'm programming a 3D game (using C++ and OpenGL), and I have a few 3D objects in the scene, we can say they are boxes for this example. I want to let the player click on those boxes to select them (ie. they might change color) with the typical restriction like if more than one box is located where the user clicked, only the one closest to the camera would get selected. What would be the best way to do this? The fact that these objects go through several transforms before getting to window coordinates is what makes this a bit tricky. One approach I thought about was that if the player clicks on the screen, I could normalize the x,y coordinates of mouse click and then transform the bounding box coordinates of the objects into clip-space so that I could compare then to the normalized mouse coordinates. I guess I could then do some sort of ray-box collision test to see if any objects lie as the path of the mouse click. I'm afraid I might be over complicating it. Any better methods out there?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >