Search Results

Search found 8929 results on 358 pages for 'multi touch'.

Page 39/358 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Windows 7 Multi-NIC woes

  - by Eric

  I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

  Read the article

• Cisco Multi-DMZ firewall

  - by BParker

  I need to find a firewall that will give me 1 LAN port, and 5-7 DMZ ports. I have a requirement to replace some FreeBSD systems that are used to run some testing equipment. It is essential that the DMZ ports cannot communicate with each other, but the LAN port can communicate with everyone. That way a user on the LAN can connect to the test systems, but the test systems are isolated entirely and cannot interfere with each other. One of the DMZ's will be connected to a VMWare ESXi server, one to a standard server, and the rest to various types of equipment. The lan port will be connected to the corporate LAN switch. Sorry if i am a little vague, I am just trying to work all this out myself! Currently we have a FreeBSD configured, but the quad port NIC's are pretty expensive, and the PC itself is old, so i would prefer to replace it with a dedicate piece of kit which can do the same job, but more reliably! These test rigs are used all over the place, and get moved quite often, so i am aiming for Cisco kit for ease of configuration and reliability of the hardware itself. Thanks

  Read the article

• Finding trends in multi-category data in Excel

  - by Miral

  I have an Excel spreadsheet that contains hundreds of rows of data that each represent a single sample in a larger population. Each row is divided into three columns that contain frequency counts of a specific type of thing. Together the three columns summed on a single row represent 100%, though each row will sum to a different value. What I'm most interested in are the proportions of each of these types (ie. percentages of each column relative to the sum of the three columns). I can easily calculate this on a per-row basis, but what I'm really interested in is trying to find an overall trend from the entire population. I don't really spend much time doing data analysis so the only thing I can think of trying is to create those percentage columns and then average them, but I'm sure there must be a better way to visualise this.

  Read the article

• using sed to replace 1 line with a multi-line variable in ksh

  - by Manda

  I have the following text in a file: XXXX NNNN YYYY NNNN ZZZZ NNNN I want to replace the NNNN to make it look like this: XXXX NNNN DUTY FORECASTER: YYYY NNNN DUTY FORECASTER: ZZZZ NNNN DUTY FORECASTER: How do I use sed to replace a variable with more than one line? Is there a better way of doing this without using sed? I have tried the following to no avail: sed 's/NNNN/"$value1"/g' testfile sed 's/NNNN/'"$value1"'/g' testfile sed 's/NNNN/${value1}/g' testfile sed 's/NNNN/'"${value1}"'/g' testfile I have also tried all of the above using double quotes. Any help is greatly appreciated. Thanks so much!

  Read the article

• Multi screens are not aligning properly

  - by Steve

  I am using (4) Samsung (SMB2230) screens. When I place my mouse on the first screen at the bottom right and pull it into the second screen the mouse jumps to the middle on the left of the second screen. Then it does the same on the 3rd and 4th screens. The biggest jump is between the 1st and 2nd then it tightens up between 2 and 3 then close between 3 and 4. This is a really pain because my mouse gets hung up and I have to move up and down to get it to change screens.I had (4) Dells screens before and this didn't happen. I'm using Windows 7

  Read the article

• Linux Scheduler (not using all cores on multi-core machine) RHEL6

  - by User512

  I'm seeing strange behavior on one of my servers (running RHEL 6). There seems to be something wrong with the scheduler. Here's the test program I'm using: #include <stdio.h> #include <unistd.h> #include <stdlib.h> void RunClient(int i) { printf("Starting client %d\n", i); while (true) { } } int main(int argc, char** argv) { for (int i = 0; i < 4; ++i) { pid_t p_id = fork(); if (p_id == -1) { perror("fork"); } else if (p_id == 0) { RunClient(i); exit(0); } } return 0; } This machine has a lot more than 4 cores so we'd expect all processes to be running at 100%. When I check on top, the cpu usage varies. Sometimes it's split (100%, 33%, 33%, 33%), other times it's split (100%, 100%, 50%, 50%). When I try this test on another server of ours (running RHEL 5), there are no issues (it's 100%, 100%, 100%, 100%) as expected. What's causing this and how can I fix it? Thanks

  Read the article

• best practice with memcache/php - multi memcache nodes

  - by user62835

  So I am working on a web app - that has to be built for scalability. It stores frequent MySQL querys into the cache. I have pretty much everything built and ready to go - but I am concerned on best practices on handling where to cache the data. I've talked to a few people and one of them suggested to split each key/value across all the memcache nodes. Meaning if i store the example: 'somekey','this is the value' it will be split across lets say 3 memcache servers. Is that a better way? or is memcache more built on a 1 to 1 relationship?. For example. store value on server A till it faults out - go to server B and store there. that is my current understanding from the research I have done and past experience working with memcache. Could someone please point me in the right direction in this and let me know which way is best or if I completely have this mixxed up. Thanks

  Read the article

• Batch processing multi-TIFF in Irfan view

  - by hemalshah

  I have to convert DPI of more than 5k Tiff images on a monthly basis from 200x200 to 100x100. I can do that in Irfan view using a .bat file that i have created.. the following is the .BAT file code @"c:\program files\irfanview\i_view32.exe" "e:\batch1*.tif /aspectratio /resample /tifc=4 /dpi=(100,100) /convert=e:\batch2*.tif" %* Where tifc=4 is Fax 4 compression However, the above code doesn't help me change the DPI for other pages except for Only the first page in the tiff thats getting converted to 100 DPI. Rest all pages are still 200 DPI. I am using WinXP Professional and Irfan View. Can anyone tell me what I am missing. Or any other alternative program where I can create a .bat file and run the batch process using Command line?

  Read the article

• Multi-monitor aterm transparency

  - by Bryan Ward

  I have 3 monitors which I set the background with using xpmroot my-5760x1200bg.png I then setup aterm to use transparency by adding the following to my ~/.Xdefaults file. aterm*transparent:true aterm*shading:60 aterm*background:Black aterm*foreground:White aterm*scrollBar:true aterm*scrollBar_right:true aterm*transpscrollbar:true aterm*saveLines:32767 aterm*font:*-*-fixed-medium-r-normal--*-140-*-*-*-*-iso8859-1 aterm*boldFont:*-*-fixed-bold-r-normal--*-*-140-*-*-*-*-iso8859-1 I am getting transparency on my aterm windows, but the image that is coming through with the transparency isn't correct. On the left monitor things are fine, but the middle and right monitors both seem to use the leftmost 1920x1200 of the background image as what is behind the terminal window. It would be as if every screen had the same background as the monitor on the left. Is this something that can be configured to be correct, or is this a bug? I'm running Gentoo Linux with Xmonad.

  Read the article

• Multi-level wildcard (catch-all) DNS setup *.*.domain.com => one IP/CNAME

  - by Jan Rovner

  It is well known that it is possible to configure a DNS server to do a "catch-all" resolving on a single subdomain level, such as *.example.com. IN A x.x.x.x, so that anything.example.com maps to a single IP/CNAME. However, I need to set up an at least "level-2" wildcard sub-subdomain catch-all wildcard system so that any.thing.example.com or better, item.of.any.level.under.example.com will be resolved to a single IP. Has anyone got this working?

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• What is the best free software to learn touch-typing?

  - by gojira

  What is the best free software to learn touch-typing? Features it needs to have: should NOT display the keyboard layout on the screen! should give detailed statistics which actually measure progress (for which key do I have the highest error rate, graphs showing how typing speed improved over time, etc) should enable me to actually learn touch-typing in about one long weekend were I don't do much else than learning to touch-type. it would be very good if it were possible to load a text-file and the program will use words from the text-file for the exercises as well My goals are: at least same typing speed as I have now but which touch-typing, want to be able to look at the screen only when typing P.S.: EDIT: I forgot to mention, I'm using Win 7. And I know what the Dvorak and Colemak keyboard layouts are, but I'm not interested in them. My question was with respect to standard US keyboard layout.

  Read the article

• Moving from single-site to multi-site Active Directory has broken OWA proxying

  - by messick

  Originally we had the following setup: OfficeExch01 has Mailbox Role and CAS Role OfficeExch01 is in the office. CoLoExch01 had just CAS Role. CoLoExch01 is internet facing and in a CoLo. Three AD domain controllers in the default site. Users could go to https://webmail.whatever.com/owa, get proxyed to OfficeExch01 and everything was great. Well, we recently setup a separate AD site and put a domain controller and the ColoExch01 server in the new site. I also made that remote DC be a Global Catalog. Now, users get the following error: Outlook Web Access is not available. If the problem continues, contact technical support for your organization and tell them the following: There is no Microsoft Exchange Client Access server that has the necessary configuration in the Active Directory site where the mailbox is stored. I also see event 41 errors in the logs: The Client Access server "https://webmail.xxxxxxx.com/owa" attempted to proxy Outlook Web Access traffic for mailbox "/o=XXXXX/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxxxk". This failed because no Client Access server with an Outlook Web Access virtual directory configured for Kerberos authentication could be found in the Active Directory site of the mailbox. The simplest way to configure an Outlook Web Access virtual directory for Kerberos authentication is to set it to use Integrated Windows authentication by using the Set-OwaVirtualDirectory cmdlet in the Exchange Management Shell, or by using the Exchange Management Console. If you already have a Client Access server deployed in the target Active Directory site with an Outlook Web Access virtual directory configured for Kerberos authentication, the proxying Client Access server may not be finding that target Client Access server because it does not have an internalUrl parameter configured. You can configure the internalUrl parameter for the Outlook Web Access virtual directory on the Client Access server in the target Active Directory site by using the Set-OwaVirtualDirectory cmdlet. Looking this up I see a lot talk about ExternalURL and InternalURL settings. However, everything worked great until we made the new AD site. I also made sure the internal CAS server's /owa virtual directory is set to use Integrated Authentication. Is there something I need to do to allow Exchange to see that I've made these AD changes?

  Read the article

• Multi-IP address zimbra server DNS PTR records and spam

  - by David Fraser

  We have a mail server running Zimbra (ZCS 6.0.8). The server has 5 active public IP addresses in the same subnet. (.226-.230). I currently have A records for each of these (host0.domain.com..host4.domain.com), with the main host.domain.com of the machine pointing to .226. Our host has ended up being listed on the SORBS DUHL list (even though it's in a server farm). According to them you can get removed quickly by checking that your host has an MX record, an A record, and a PTR record that points back to the hostname given in the MX record. I tried setting the PTR records so that each of these addresses resolved back to their A record (i.e. .228 had a PTR to host2.domain.com). However, I then got mail being rejected from other servers because when Postfix (under Zimbra control) sends out mail, it uses the main hostname for the HELO - there doesn't seem to be any way to override it. So the PTR records currently say host.domain.com for all 5 IP addresses. What's the correct way to handle this? Should I have an A record for the domain that points to all the IP addresses (for round-robin handling)? I'm nervous of changes that could cause problems, so I'm wondering what the standard way to handle a multiple-IP-address mail server is.

  Read the article

• Multi Thread Rsync Transfer

  - by reefine

  For some reason when running a single rsync command I am getting 1 MB/sec to 2 MB/sec even when I connecting 2 servers both connected to 1 Gbps ports. rsync -v --progress -e ssh /backup/mysqldata/mysql-bin.000199 [email protected]:/secondary/mysqldata/mysqldata/mysql-bin.000199 I have over 800 GB of data to transfer split among 500 or so files all starting with: mysql-bin.000* I've found that running 25-30 rsync simultaneously from seperate SSH windows gets me upwards of 25 MB/sec but it will take me hours to run these all manually. Is there anyway to get the 25 MB/sec from a single rsync command?

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• Multi-Domain Root Administrator

  - by Brent Pabst

  We have a new domain structure we are planning on rolling out in the next few months. Essentially there is a single top level and forest domain controller "mydomain.lan" and two children "us.mydomain.lan" and "pl.mydomain.lan". We want to configure an administrator account or two at the top level domain that then has full administrator permissions on the sub domains. By default the top level administrator cannot access or login to machines on the sub-domains. Running W2K8R2. Ideas?

  Read the article

• Multi serial devices on one port

  - by adopilot

  I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

  Read the article

• Multi Monitor setup goes crazy after locking/unlocking Vista machine

  - by Farseeker

  Give me a 10-blade quad-processor quad-core Opteron centre and ask me to configure failover/load balancing and I'd be happy to, but the following problem has got me completely stumped. My Vista Business Professional machine, running Ultramon, has three monitors attached. When I lock the machine (to go to the delicious cafe around the corner), the monitor layout stays correct. When I unlock it, I watch as all my screens flicker (as they are being re-configured), and Vista chooses some crazy layout for the monitors. The most recent one is below, but it's never consistant. Any ideas what might cause this? It's Vista Business, with UltraMon 3.0 (exiting Ultramon makes no difference).

  Read the article

• Mozilla sunbird : Multi-day event looks weird in calendar

  - by Manu

  Hello, I'm testing the Mozilla calendar, Sunbird. I've added a 4-days event, but I find that it looks a little weird, compared to what it looks like in google calendar : Sunbird Google Calendar is there an option to have the long events span multiple cells ?

  Read the article

• Multi Monitor setup goes crazy after locking/unlocking Vista machine

  - by Mark Henderson

  My Vista Business machine, running Ultramon, has three monitors attached. When I lock the machine, the monitor layout stays correct. When I unlock it, I watch as all my screens flicker (as they are being re-configured), and Vista chooses some crazy layout for the monitors. The most recent one is below, but it's never consistent. Any ideas what might cause this? It's Vista Business, with UltraMon 3.0 (exiting Ultramon makes no difference).

  Read the article

• Comments in a multi-line bash command

  - by Nicolas Raoul

  This single-command BASH script file is difficult to understand, so I want to write a comment for each of the actions: grep -R "%" values* \ | sed -e "s/%/\n%/" \ | grep "%" \ | grep -v " % " \ | grep -v " %<" \ | grep -v "%s" \ | grep -v "%d" \ | grep -v "%1$s" I would hate having to duplicate lines, or having each comment far away from the line it applies to. But at the same time BASH does not seem to allow "in-line" comments. Any elegant way to solve this problem?

  Read the article

• Subversion multi checkout post-commit hook?

  - by FLX

  The title must sound strange but I'm trying to achieve the following: SVN repo location: /home/flx/svn/flxdev SVN repo "flxdev" structure: + Project1 ++ files + Project2 + Project3 + Project4 I'm trying to set up a post-commit hook that automatically checks out on the other end when I do a commit. The post-commit doc explicitly lists the following: # POST-COMMIT HOOK # # The post-commit hook is invoked after a commit. Subversion runs # this hook by invoking a program (script, executable, binary, etc.) # named 'post-commit' (for which this file is a template) with the # following ordered arguments: # # [1] REPOS-PATH (the path to this repository) # [2] REV (the number of the revision just committed) So I made the following command to test: REPOS="$1" REV="$2" echo "Updated project $REPOS to $REV" However when I edit files in Project1 for example, this outputs "Updated project /home/flx/svn/flxdev to 1016" I'd like this to be: "Updated project Project1 to 1016" Having this variable allows me to specify to do different actions per project post-commit. How can I specify the project parameter? Thanks! Dennis

  Read the article

• Subversion multi checkout post-commit hook?

  - by FLX

  The title must sound strange but I'm trying to achieve the following: SVN repo location: /home/flx/svn/flxdev SVN repo "flxdev" structure: + Project1 ++ files + Project2 + Project3 + Project4 I'm trying to set up a post-commit hook that automatically checks out on the other end when I do a commit. The post-commit doc explicitly lists the following: # POST-COMMIT HOOK # # The post-commit hook is invoked after a commit. Subversion runs # this hook by invoking a program (script, executable, binary, etc.) # named 'post-commit' (for which this file is a template) with the # following ordered arguments: # # [1] REPOS-PATH (the path to this repository) # [2] REV (the number of the revision just committed) So I made the following command to test: REPOS="$1" REV="$2" echo "Updated project $REPOS to $REV" However when I edit files in Project1 for example, this outputs "Updated project /home/flx/svn/flxdev to 1016" I'd like this to be: "Updated project Project1 to 1016" Having this variable allows me to specify to do different actions per project post-commit. How can I specify the project parameter? Thanks! Dennis

  Read the article

• Multi sim GSM modem or alternative

  - by Ando

  I'm trying to administer the SMS trafic of my businesss centrally through a web portal. In Europe (except UK) we don't have a numbers/SMS trafic provider like Twilio or Clickatell, nor any build in way to administer the SMS traffic for a number via http, so I will have to buy the long numbers and administer the SMS traffic myself. For this I was looking into a hardware solution for hosting all my SIM cards - I have like 400 sims cards (= numbers). I saw that GSM modems might fit in but they don't seem to scale up very well. Could you recommend me a GSM modem? If this is not the best way to approach this, what would my alternatives be? Thanks in advance

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >