Search Results

Search found 20394 results on 816 pages for 'network filesystem'.

Page 39/816 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect

  - by user287529

  Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect. I'm using Ubuntu 12.04 on an Acer Aspire 5742-7645 laptop with 4GB memory, Intel Core i3 processor, Intel HD Graphics, DVD drive, 802.1 b/g/n, and 500 GB HD. I connect to my router via a wireless connection. I have installed Virutalbox 4.1.12 from the Ubuntu Software Center and installed Guest additions 4.1.12 in the Windows 7 guest session. I have Windows XP and Windows 7 installed as guests in Virtual box The network settings are different for XP and 7 – see below. Network Settings XP guest = Adapter 1: PCnet-FAST III (NAT) - Network works perfectly and has worked well for several years. Network Settings Win 7 = Adapter 1: Intel PRO/1000 MT Desktop (Bridged adapter, eth1) Promiscuous Mode = allow all Cable connected = checked When I originally installed Windows 7, I tried NAT and the guest network would not connect. Once I changed the setting to the above (Bridged) the Network worked perfectly. However, what I believe is after updates (not sure if it was an Ubuntu or Windows update) the guest network stopped working and I can not get it to connect. Interfaces file content auto lo iface lo inet loopback Ifconfig yields lou@lou-Aspire-5742:~$ ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:09:f6:5c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 Link encap:Ethernet HWaddr 4c:0f:6e:7c:9f:01 inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e0f:6eff:fe7c:9f01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18095 errors:2 dropped:0 overruns:0 frame:24344 TX packets:9281 errors:47 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5301926 (5.3 MB) TX bytes:1441885 (1.4 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3208 errors:0 dropped:0 overruns:0 frame:0 TX packets:3208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:294088 (294.0 KB) TX bytes:294088 (294.0 KB) Ipconfig yields the following: Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::38ba:dbca:a21d:c3d1%13 Autoconfiguration IPv4 Address. . : 169.254.195.209 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{B292E440-679D-4FC5-8E34-77D6804669C8}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : I'm not sure what else to do. Can someone provide the troubleshooting steps to determine what the problem is and possible solution?

  Read the article

• Network communication across two private network

  - by Sethu

  Hi All, I am trying to implement a peer to peer communication .. I use sockets for communication between them. I want to know if there are any ways i can use the same sort of communication when the two peers are behind two private Networks (They dont know each others public ip address.) I can think of a shared buffer in a well known location as a means of communication. But is there some other way to get this done?

  Read the article

• my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

  - by Yosef

  Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

  Read the article

• Connecting a network drive only when the VPN is connected?

  - by leeand00

  I have a thumb drive that I want to be able to connect to the same place over the network at one location as it is locally. Sometimes I leave it at the other location, but usually if I'm going to back it up, I back it up locally for network traffic. Is there a way to automatically connect the thumb drive when I connect to the VPN? (Always to the same drive letter...and obviously skip connecting it if it's already plugged in locally and the VPN is connected...) I'm using a Cisco VPN Client 5.x

  Read the article

• How do you confirm network adapter is gigabit capable?

  - by StrandedPirate

  Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

  Read the article

• Network printer - Print direct or via shared printer on Server?

  - by NickC

  It has occurred to me that a workstation can connect to a printer in two ways: 1). Printing directly to the IP of the printer with the print driver installed locally. 2). Printing to a \Server\Printer1 share with the print queue residing on the server. Question is which way is preferred? I would assume that printing directly to a network printer rather than going through the server would be the most efficient from the point of view of network traffic. On the other hand I guess a server printer share would be easier to manage with the correct driver automatically being downloaded to the workstations. Also what about using GPP (Server2012) to install this printer on the workstations, does that require any specific way?

  Read the article

• Trying to test space in filesystem on Unix

  - by Buzkie

  I need to check if I Filesystem exists, and if it does exist there is 300 MB of space in it. What I have so far: if [ "$(df -m /opt/IBM | grep -vE '^Filesystem' | awk '{print ($3)}')" < "300" ] then echo "not enough space in the target filesystem" exit 1 fi This throws an error. I don't really know what I'm doing in shell. My highest priority is AIX but I'm trying to get it to work for HP and Sun too. Please help. -Alex

  Read the article

• Installing linux on a crippled machine via network boot?

  - by networkbooter

  I have a somewhat ancient Toshiba laptop (which can't boot from USB) that I want to install linux on (probably Ubuntu). I'm currently running Windows XP and Ubuntu via Wubi. I want to delete these OSs and replace with Ubuntu only. The laptop does have a network boot option. I'm wondering if the easiest way might be to setup a network boot server on my other computer (which runs Ubunutu) and boot the laptop from it. Could this allow me to install Linux on the laptop? I can't seem to find instructions on the 'net as to how to go about doing this.

  Read the article

• When an Excel file is locked on a network share, how does it know who locked the file?

  - by ScottStonehouse

  We are using Excel 2010 and sometimes users are working from a network share. When a user on the network opens the file in Excel, the file is locked for editing - this is the expected behavior. When another user tries to open the file, Excel gives the message [filename] is locked for editing by 'John Doe' The problem is, the user is always this one particular user's name, no matter who actually has the file open. Where does Excel get this info, and how do I fix it? Update: I should have mentioned that in Excel, under Options (General), the correct user names have been set up. That is not where this user name is coming from.

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• A gigabit network interface is CPU-limited to 25MB/s. How can I maximize the throughput?

  - by netvope

  I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? As a reference, the other computers in the network can usually transfer at 50+MB/s without problems. A computer with a Core 2 CPU generates only 5000 interrupts per second when it's transferring at 110MB/s. The number of interrupts is about 20 times less than the Atom system (if interrupts scale linearly with throughput.) And a minor question: How can I find out what is the driver in use for eth0?

  Read the article

• I'd like to archive files from Ubuntu to Windows between two computers on a shared home network

  - by Wabbitseason

  I have an old laptop running Ubuntu 9.10 which I use as a LAMP environment for web development, and I have a comfortable, powerful desktop computer with Windows 7 installed on it. These two are connected to a home router so both can access the internet. I have been able to set up Samba so I can mount my Apache home directory so it is accessible from Windows and is mapped as a network drive. What I'd like to do is access some Windows folders from Linux so I could automatically create backups (with cron scripts) of my work to physically different locations on the Windows box. Perhaps at a later time I'd set up a local Subversion repository but I'd love to keep backups of that on the Windows drives too. Using Ubuntu's Places/Network menu I can see my desktop but I'm unable to log in to that despite having created the corrent username and password on Windows. All I can get is the following error message: "Unable to mount location. Failed to retrieve share list from server." What could be misconfigurated?

  Read the article

• Building a network at home, what cables to use (if any)?

  - by Faruz

  My house is currently in ruins and am building it. While doing so, I wanted to design a home network. My main objectives are surfing and HD streaming. The house is one-level, 100 sq/m (about 300 sq/ft), and one of the rooms is a safety room with Reinforced concrete walls. About a year ago, when I started planning, I thought about putting Cat 6 STP cables in the walls and create network points in the rooms. Should I use STP or FTP? I heard that STP is a problem regarding connectors and stuff. Is it really beneficial? Will it work OK if I transfer the wire together with the telephone line? Should I maybe go with WLan and count on 802.11n to enable me to stream HD across the house? is 802.11n that good?

  Read the article

• Distributed filesystem for automated offline data mirroring

  - by Petr Pudlák

  I'd like to achieve the following setup: Every time I connect my laptop to a local network, my partition gets automatically mirrored to a partition on my local server. I only want to mirror what has changed from the last time. (I understand that it is not a proper backup solution since there is no history of the changes, it'd be more like a non-persistent network RAID.) Is there a distributed file system that allows such a setup? I've done some searching and it seems to me that most distributed file-systems are focused on data availability and distribution, not duplicating them. I'd be thankful for suggestions. Edit: Sorry, I forgot to mention: I'm using Linux.

  Read the article

• Using a Token-ring network card instead of a router (?)

  - by John

  I have cable, and the modem only has 1 network plug-in. They said I could buy my own router if I wanted to hook up two computers to it. I have an IBM Turbo 16/4 Token-Ring PC Card 2, which was in the laptop when I bought it, and the laptop also has the typical network plug (not a PC Card). Is there a way I could run the laptop as a server, and plug my desktop into the laptop, so they both have internet without my having to buy a router? (I realize routers are as cheap as $30.) Both computers run Windows XP Pro SP3. (I also have an 10/100 Etherjet Cardbus card (PC Card)). Thanks.

  Read the article

• Highly efficient filesystem APIs for certain kinds of operations

  - by romkyns

  I occasionally find myself needing certain filesystem APIs which could be implemented very efficiently if supported by the filesystem, but I've never heard of them. For example: Truncate file from the beginning, on an allocation unit boundary Split file into two on an allocation unit boundary Insert or remove a chunk from the middle of the file, again, on an allocation unit boundary The only way that I know of to do things like these is to rewrite the data into a new file. This has the benefit that the allocation unit is no longer relevant, but is extremely slow in comparison to some low-level filesystem magic. I understand that the alignment requirements mean that the methods aren't always applicable, but I think they can still be useful. For example, a file archiver may be able to trim down the archive very efficiently after the user deletes a file from the archive, even if that leaves a small amount of garbage either side for alignment reasons. Is it really the case that such APIs don't exist, or am I simply not aware of them? I am mostly interested in NTFS, but hearing about other filesystems will be interesting too.

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• Total network data sent/received of a non-daemon Linux process?

  - by leden

  I'm looking for a simple and effective way of measuring total bytes received/sent from a single process upon its termination. Basically, I am looking for a tool which has the interface similar to "time" and "/usr/bin/time", e.g. measure-net-data <prog_to_run> <prog_args> Received (b): XYZ Sent (b): ABC I know that there are many tools for bandwidth/network monitoring, but as far I can tell all of them are performing the measurements it real-time, which is inappropriate not only because of overhead but also because of the inconvenience - I would need to stop the program, capture the output of the tool and then kill it. I have seen that newer versions of Linux 2.6.20+ provide /proc/<pid>/io/ which contain the information I'm looking for; however, everything under /proc/<pid> when the process terminates, so I'm again back to the same problem as with any network monitoring tool.

  Read the article

• How do I reduce the size of mlocate database?

  - by MountainX

  I'm out of space on /var 25G 25G 0 100% /var It looks like mlocate.db is the problem: # find . -printf '%s %p\n' | sort -nr | head 13140140032 ./lib/mlocate/mlocate.db.cgLMAM 12409839616 ./lib/mlocate/mlocate.db.MqGeqe cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf" I don't see anything else to prune. So how can I fix this? Thanks

  Read the article

• How can I keep a folder synchronized to an external USB hard drive in Ubuntu?

  - by Cesar

  I have a growing music collection which I manually keep in sync with an external USB drive. Sometimes I edit their ID3 tags, add or delete a file in either the hard drive or the USB drive, and I would like to keep those changes synchronized between both. Does Ubuntu has something available that would help me with this scenario? Preferably something easy to use with a UI. Update: To clarify my question, changes may happen on both the local hard drive or the USB drive, so the sync process must be on both directions.

  Read the article

• Read-only file system

  - by John

  The title might not be as descriptive as I would like it to be but couldn't come up with a better one. My server's file system went into Read-only. And I don't understand why it does so and how to solve it. I can SSH into the server and when trying to start apache2 for example I get the following : username@srv1:~$ sudo service apache2 start [sudo] password for username: sudo: unable to open /var/lib/sudo/username/1: Read-only file system * Starting web server apache2 (30)Read-only file system: apache2: could not open error log file /var/log/apache2/error.log. Unable to open logs Action 'start' failed. The Apache error log may have more information. When I try restarting the server I get : username@srv1:~$ sudo shutdown -r now [sudo] password for username: sudo: unable to open /var/lib/sudo/username/1: Read-only file system Once I restart it manually it just start up without any warning or message saying something is wrong. I hope somebody could point me into the right direction to resolve this issue. Thanks in advance!

  Read the article

• no entry for / in /etc/fstab

  - by valya

  Hello! I can't find an entry for mounting "/" in /etc/fstab (I was hoping to set commit value to something big because my HDD is pretty slow): [.../fest]$ cat /etc/fstab # UNCONFIGURED FSTAB FOR BASE SYSTEM /dev/sda3 /media/megahard ntfs-3g defaults,locale=en_US.UTF-8 0 0 /mnt/2Gb.swap none swap sw 0 0 [.../fest]$ cat /etc/issue Ubuntu 10.10 \n \l Netbook Remix, installed with chroot from Wubi (it's not Wubi, it's just installed from it)

  Read the article

• Whats consuming HDD Space

  - by Umair Mustafa

  I have single partition of 92GB in which I installed Ubuntu 12.04. And for some Unknown reason a message pop ups saying that I only have 1GB of HDD space left. I ran command sudo du -hscx * on / and /home /home gave me this result 4.0K C:\nppdf32Log\debuglog.txt 0 convertedvideo.avi 176M Desktop 16K Documents 169M Downloads 4.0K examples.desktop 17M file.txt 4.0K Music 984K Pictures 4.0K Public 320K Red Hat 6.iso 2.5M syslog-ng_3.3.6.tar.gz 4.0K Templates 8.0K terminal.png 1.2M Thunderbird Attachments 698M ubuntu10.04LTS.iso 16K Ubuntu One 4.0K Untitled Folder 4.0K Videos 21G VirtualBox VMs 22G total And / gave me this result 81G home 0 initrd.img 0 initrd.img.old 833M lib 16K lost+found 68K media 4.0K mnt 260M opt du: cannot access `proc/8339/task/8339/fd/4': No such file or directory du: cannot access `proc/8339/task/8339/fdinfo/4': No such file or directory du: cannot access `proc/8339/fd/4': No such file or directory du: cannot access `proc/8339/fdinfo/4': No such file or directory 0 proc 640K root 908K run 8.6M sbin 4.0K selinux 4.0K srv 0 sys 148K tmp 3.3G usr 436M var 0 vmlinuz 0 vmlinuz.old 86G total If you look at the result returned by / it shows that /home is consuming 81GB but on the other hand /home returns only 22GB. I cant figure out whats consuming the HDD. I have not installed anything except Virtual Machines Perpetrator found using Disk Usage Analyzer

  Read the article

• How does ecryptfs impact harddisk performance?

  - by Freddi

  I have my home directy encrypted with ecryptfs. Does ecryptfs lead to fragmentation? I have the feeling that reading files, displaying folders and login became continuously slower and slower (although it was not noticeably slow at the beginning). The hard disk makes a lot of seek noise even if I open only a text file. In /home/.ecryptfs I see many big archives (that probably contain the encrypted files), so I'm wondering if Linux file system online defragmentation gains anything here. What options do I have to increase performance? Should I decide whether I maybe better do without encryption?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >