Search Results

Search found 20388 results on 816 pages for 'nvidia current'.

Page 39/816 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• Display won't come back from power saver mode

  - by tynor

  I wan't sure where exactly to post this question, but this one seemed the most relevant. I have a Dell LCD monitor running off a Dell Inspiron 531 tower with an Nvidia GeForce 8600 GT video card. Just recently, when I turn my computer on, the display immediately enters its "Power Saver" mode, and never wakes up. This problem doesn't occur with other computers, or even with this same computer when I use the integrated graphics. I have no other displays to test the card on. I have also tried replacing the power supply (my original one, which ran that video card for 4 years, was 300w, and I replaced it with 500w). Is there anything else I can try to troubleshoot this issue?

  Read the article

• SLI Artifact issues

  - by sloughk

  When I enable SLI I keep getting artifacts in random games and in Windows Aero sometimes . It doesn't seem to be about over-heating as it happens randomly, and sometimes whole computers just crashes (not blue-screen, just black gone...) My setup: Geforce 8800 GTS 320MB ( http://www.bfgtech.com/bfgr88512gtoce.aspx ) x 2 GIGABYTE EX58-UD4 Windows 7 RC PSU 800W I've got the latest NVIDIA drivers and F5 BIOS update (*SLI update*). When I disable SLI and use the cards separately they are working just fine even in games. Any idea why this might happen?

  Read the article

• Limited RGB range due to HDMI cable?

  - by Cedric Reichenbach

  I have a NVidia GeForce GTX 660, connected to a Samsung SyncMaster S24B350 through a HDMI cable. On my computer, I'm running both, Windows 8 and Linux Mint. I think that something might prevent my system from using the whole RGB spectrum, since bright colors seem to vanish into white under standard settings. However, under Linux I could switch to a limited color range mode (16-235) and suddenly, the image looked much better. Is it possible that the HDMI cable limits color range (since it was originally inteded for TVs)? Is there a way of switching to limited color range mode in Windows 8 as well?

  Read the article

• Comparison between these video cards?

  - by seedeg

  Currently I have a GeForce 8600GT as a video card. I started playing EVE online and it is not that smooth (Apart from the fact that my Windows 7 is starting to become slow so it needs a format). Now I have these 3 video cards on my mind: 1GB Gainward GF GT240 PCI-Express Video Card 1GB Gainward GF9800GT PCI-Express Video Card 1GB Gainward GF GT240-GS PCI-Express Video Card I tried comparing them from nvidia's site: HelpMeChoose but the GT240-GS is not available for comparison. However, when I tried comparing the GT240 with the 9800GT, the latter was the winner. You must keep in consideration that the cheapest one is the GT2400. The 9800GT is in the middle, and the one which is not available for comparison, the GT240-GS is the most expensive one (about 6 euros more than the 9800GT). Is the GT240-GS the best video card from these? Thanks in advance for your responses.

  Read the article

• How do I make my Geforce GTS 250's power save mode stop causing audio stuttering?

  - by Matt

  Whenever my GTS 250 enters its power save mode, downscaling its frequencies, my audio stutters. This affects both my onboard audio and my Audigy Soundblaster 2 ZS. Changing Windows power save mode options such as PCI-E link state power management or Power Management Mode in the nVidia control panel have no effect on this issue. Replacing the power supply had no effect on this issue. The BIOS is the latest version, and I have the latest motherboard chipset and graphics drivers installed. I do not overclock. I started to see this issue after I upgraded my rig from its Socket 939 board to a Socket 1156 board with a Core i5-750 while simultaneously upgrading from Vista to 7.

  Read the article

• Running Ubuntu with multiple monitors having a panel each

  - by Andreas Grech

  I have just installed Ubuntu and I'm trying to set up a correct configuration for having multiple monitors. I want the two monitors to have their own workspaces, yet the ability to drag a window from one monitor to the next. I also want a separate panel (taskbar) for each monitor. I have played around with nvidia-settings and tried the following different configs: Having both monitors `Use separate X screen" A panel for each monitor but I couldn't drag windows from one monitor to the next Using TwinView The ability to drag windows from one monitor to the next but only a single panel for the primary display Now I want to have the above configurations combined. Basically, as I stated beforehand, having a separate panel for each monitor and also the ability to drag windows across monitors. Can anyone provide me with suggestions please?

  Read the article

• ASUS K55VM Laptop unexpectedly shuts down

  - by Abhishek Sha

  I've read quite a few questions on SuperUser of people having laptop shutdown problems but mine is different. My laptop specs: Intel Core i7 3610QM (IvyBridge) NVIDIA GT630M 2GB and Intel GMA4000 8GB RAM Windows 7 64 Bit My laptop occasionally shuts down when playing FarCry 3. It's around 5 months old. I've played games like Crysis and it never shuts down unexpectedly. Since I experienced this shut down recently, I decided for GPU-Z to log the temperatures. The final log value at the time of shutdown were thus: GPU Core Clock [MHz] - 797.3 GPU Memory Clock [MHz] - 896.8 GPU Temperature [°C] - 89.0 GPU Load [%] - 99 Memory Controller Load [%] - 36 Video Engine Load [%] - 0 Memory Usage (Dedicated) [MB] - 535 Memory Usage (Dynamic) [MB] - 53 VDDC [V] - 1.0620 My drivers are up-to-date and I didn't encounter any BSODs at the time of shut down. It simply turns off.

  Read the article

• 3 Monitors, 1 graphics card

  - by mikelbring

  I have a Nvidia GT 120 graphics card. It has a VGA, DVI and DMI output. Can I have 3 monitors with this? One for each port. Also if not, can I use DVI and HDMI and have 2 monitors. I know I can do 2 with the VGA and DVI but I am wondering about DVI and HDMI. Also my last question is, if I can have 2 monitors with the DVI and HDMI, can I use a HDMI to DVI cable and still have the same success?

  Read the article

• Different graphic cards drivers while booting from external media

  - by goran

  I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

  Read the article

• Ubuntu 12.04 blank screen after login

  - by kgthenerd

  I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

  Read the article

• My Graphics Card isn't working Properly

  - by Dan

  I have just upgraded from a Sapphire AMD 6670 2gb Graphics card to a Nvidia GTX 650 ti 2gb SSC and my Windows Experiance index has gone from 6.8 to 7.7 but when playing games i am seeing no improvements i cannot play saints row three on even the lowest settings but according to many people and benchmarks on the web i should be able to play it comfortably. I want to know why this is happening to me..... I have installed the latest drivers and i have direct 10 + 11 installed I am 15 and it's my birthday today as i got it as a present but its not doing what i want also in am using a dvi cable not hdmi because i need a new one and its in the post. Is it possible that using dvi will affect performance

  Read the article

• 3 Monitors 1 graphic card

  - by Michael

  I have a Nvidia GT 120 graphic card. It has a vga, dvi and hdmi output. Can I have 3 monitors with this? One for each port. Also if not, can I use dvi and hdmi and have 2 monitors. I know I can do 2 with the vga and dvi but I am wondering about dvi and hdmi. Also my last question is, if I can have 2 monitors with the dvi and hdmi, can I use a hdmi to dvi and still have the same success? Thanks

  Read the article

• Rendering artifact when using Eclipse (FlashBuilder)

  - by Demian Brecht

  Once in a while when using FlashBuilder, I'll get a rendering artifact that doesn't go away until I do a full reboot. This artifact seems to be caused by a popup triggered by code documentation popups (hovering over keywords) that linger after the popup has been dismissed: This behavior is seemingly random and incredibly annoying. It only happens when using Eclipse (although I don't run many Java-based programs) and run an NVidia Quadro 2000M (with the latest drivers - figured I'd try that before posting). Has anyone else encountered this issue? Any known solutions?

  Read the article

• 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

  - by Arch Angel

  Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

  Read the article

• Monitor has yellow tint when used with the graphics card

  - by artknish

  I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

  Read the article

• Can't unlock locked screen, in Ubuntu 12

  - by Camille Goudeseune

  After locking the screen (with a keystroke bound to xlock -nice 8 -mode blank), I can unlock the screen as expected, but only within a few minutes. After being locked overnight, when I hit a key (even Ctrl+Alt combos), the screen stays black with just a brief white flash across the middle of both monitors. The workaround is to ssh in from another host and restart X. Some months ago, this happened every few weeks. By now it happens almost every morning. How do I even start to diagnose this? What might I look for in log files? (The intermittency is particularly troubling.) Failing that, is there an alternative to xlock aka xlockmore? Hardware: 3-year-old HP minitower, GEForce 9800 GT, two Asus LCD monitors. Software: Ubuntu 12.04.2 LTS. Window manager awesome-wm. NVidia driver 304.88. XLock version xlockmore-5.31.

  Read the article

• Building my own computer

  - by There is nothing we can do

  I'm planning to build my own computer. I do not have enough cash to buy all components I need in one go. I want to ask, if I buy motherboard which is compatible with i7 processor (any) and compatible with graphic card Nvidia gtx 780, does it mean that this mother board will be compatible with processors (from intel) which will be released next year? Same for graphic cards? The point is that I'd like to avoid situation where I buy motherboard let's say now, and in couple of months there will be new graphic card/processor which will not be compatible with my mother board? Or maybe shall I start completely somewhere else?

  Read the article

• Dual 9500GT video cards, one works

  - by bossDub

  I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

  Read the article

• Dell monitors keep blank after initial start

  - by offler

  We have Dell T1650 PCs with 2 nVidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectedly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• Restoring raid 5 array after bios flash

  - by cogergo

  I have just flashed my BIOS and now my machine does not detect my raid5 array! It has three 2TB drives in it so that is a LOT of data that will be lost! I have NOT deleted the array and it does not offer me to reboot I'm using Nvidia MediaShield! and Windows 7. Any ideas guys? Thanks! Update: here is the GUI raid configuration. As you see it shows one disk in the array but for some reason not the other two! Click for image of raid configuration error

  Read the article

• Ubuntu 9.10 Karmic, nVidea Quadro NVS 280 PCi, Eizo S1921 Dual Screen (Twin View) Slow Window Draws

  - by Spasm

  I have been following this Tutorial to get dual monitors working on my box http://www.dwasifar.com/?p=862&cpage=1#comment-5727 It works! However, when ever I move a window, the redraw of that window takes 3-8 seconds. Even moving the window takes the same amount of time Is this being done in software rather than the nVidea hardware? The windows themselves do not respond. I have seen a few old threads but no relevant fixes - If anyone could suggest a fix I would very much appreciate it. I have tried: sudo nvidea-xconfig sudo nvidia-settings Then configure TwinView go to save the config... and the error unable to parse xorg.conf file and the error in the console VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Undefined Device "null" referenced by Screen "Configured Screen Device" Segmentation fault

  Read the article

• Linux virtualized screen resolution

  - by vladev

  Hopefully there is a positive answer to this question: I have a 15.4" laptop with native screen resolution of 1920x1200. You can imagine that everything is completely unreadable by default. If I increase the font size it becomes readable, but ugly. Is it possible to set the "real" resolution to 1920x1200 so it plays nice with the monitor, but set some "virtual" resolution of 1440x900 so that everything starts looking nice. Note: If I just change the resolution to 1440x900 everything becomes blurry, since this is not the monitor's default resolution. I know that having a small monitor with high resolution is not very optimal - not my choice. (Using nvidia GF8400M)

  Read the article

• How to shorten the no of characters display for the current directory in the prompt

  - by michael

  Hi, I am using bash, and in my .basrhrc: I have the following which defined how my prompt looks: PS1='${debian_chroot:+($debian_chroot)}[\033[01;32m]\w[\033[00m]:[\033[01;34m]!:#[\033[00m]\$ ' I think the \w display the current path of the shell. Is there any way to limit the number of character used to display the current path of the shell?

  Read the article

• Perfmon - Redirector current command 0 result

  - by Dave

  I'd like to monitor how many SMB connections there are at any given time for my 2008R2 file server, but when I add Redirector/Current Commands in perfmon, I get 0 results. This KB from Microsoft isn't exactly helpful either: http://support.microsoft.com/kb/2523382 It mearly confirms there is an issue, but doesn't provide a work around. How would I go about getting the current number of SMB connections? Thanks for your help in advance.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >