Search Results

Search found 6200 results on 248 pages for 'partition recovery'.

Page 39/248 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• linux refused to mount a valid partition

  - by greg

  My setup is a linux box with 1 partition used thought LVM - has been working for years. I add a freeze and after the reboot the partition cannot be mounted: mount -r -t ext3 /dev/pve/data /mnt/pve-data mount: wrong fs type, bad option, bad superblock on /dev/mapper/pve-data, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so However fsck doesn't see any problem with it: fsck.ext3 -fp /dev/pve/data /dev/pve/data: 3024076/60366848 files (0.6% non-contiguous), 156921642/241435648 blocks There's nothing in dmegs nor the syslog. I'm puzzled, what's wrong with my partition? Thanks in advance greg debian 5.0.10 LVM 2.02.39

  Read the article

• running chkdsk on a disk without a drive letter

  - by neubert

  I have a hard drive that shows up in Disk Management as having two partitions. One of the partitions says 69.71GB and that's it. The other says 4.82GB and, underneath that, Healthy (OEM Partition). I'm trying to do chkdsk on the 69.71GB partition and am unsure of how to do it without a drive letter. Any ideas? It's an NTFS partition that's gotten corrupted. Linux's ntfsfix spits out a bunch of errors so I'm thinking chkdsk might be better. Thanks

  Read the article

• Different output by df and du

  - by user1263746

  I have an old RHEL 5.5 Box, When I fire df -kh I see that /var is of 49 GB with 100 % usage. But then I go inside the /var cd /var and I fire du -kh I see that only total 300 MBs are used. I am not able to get it. Is is possible that this partition is shared with different partition? I see that /opt is also of 49 GB. I think that they are same partition. I need to free /var to start mysql but there is hardly anything to be deleted. Any pointers?

  Read the article

• Accidentally replaced the partition table using GParted in UBUNTU

  - by claws

  Hello, This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space. Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. But I don't know how? Can any one kindly tell me how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!!

  Read the article

• Unable to use NTFS partition for Dropbox in Linux

  - by Cristian

  Dropbox won't let me choose the sync folder inside a NTFS partition. First thought I had was mounting and its permissions (the Dropbox installer does let me choose my linux home as the Dropbox home). After searching and trying several other lines, the partition is mounted via fstab with these settings: /dev/sda5 /mnt/documents ntfs-3g uid=1000,gid=100,dmask=027,fmask=137 0 0 I can read and write in the partition, here is a ls output: 24 drwxr-x--- 1 tuxcayc users 24576 Sep 2 06:42 documents I'm using an Arch-based distro (Manjaro) and Dropbox installed via yaourt. I guess it's still some issue with mounting permissions. Any help is appreciated, Thanks.

  Read the article

• Trouble upgrading OS X, because HD doesn't use GUID Partition Table Scheme

  - by Erik Vold

  So I have a MacBook with Mac OS X 10.5 and I'm trying to upgrade to 10.6, but when I run the upgrade 'install' I quickly get to a page where I am supposed to 'Select the disk where you want to install Mac OS X' and there is only the one hard drive, so it is auto selected, and below that I see a warning message and the only button available is the 'Go Back' button. The warning message says: "Macintosh HD" can't be used because it doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options. So I followed the above instructions, and I got to the last step, where I'm supposed to click the 'Options' button, the problem is that I cannot click that button, it is disabled.. So what am I supposed to do?

  Read the article

• Resize Ubuntu Linux system to smaller disk inside VMware ESXi

  - by mlambie

  I have several Ubuntu Linux virtual machines running on VMware ESXi hosts that have all been allocated disks much larger than their required capacity. As space is now becoming an issue on our SAN, I'd like to investigate downsizing the allocated disk space on these machines. All systems will be completely backed up imaged before I begin making changes, and I will always retain a pristine backup in case the partition resizing does not work. Is there an easier way than the following procedure, or is their a better solution entirely? Shutdown and assign a second disk to the virtual machine Boot using the SystemRescueCD Use GParted to resize the original (source) partition, making it smaller Clone the new, smaller partition to the second disk Shutdown and remove initial disk from the virtual machine Reboot and force fsck to check the filesystem

  Read the article

• Encrypting a thumb drive

  - by Kris

  What I would like to do is create a hidden, TrueCrypt partition on my thumb drive (along with the "fake" partition that it creates) but I also don't want to have the TrueCrypt software installed onto my machine. Is there a way to do this but add TrueCrypt as an auto-start item so I plug in my thumb drive, mount the hidden partition, and go? Beyond that, is there a way to make it work in ANY operating system (i.e. automatically start TrueCrypt on OS X, Linux or Windows on plug-in)? I'm more concerned with my first question but this would be icing on the cake.

  Read the article

• OpenSuSE 11 iscsi target: HFS+ partition not seen by clients

  - by radiopaque

  I have an openSuSE machine as a file server, which has an Areca 1880i inside. It contains several partitions. There is a dm-0 and a dm-1 partition, for example. The partitions are formatted as EFI system partitions, with HFS+ file systems. My opensuse could not read them but the iscsitarget exported them for my Macs. This worked for more than a year. For some reason now, after some network problems which were "solved", my dm-0 partition is not seen anymore! I suspect it is a problem on the iscsi target side, i.e. the OpenSuSE machine. Can anyone suggest what I should look into? Any logs, any settings on the linux machine? None of my macs can access the partition, and they use different client software!! Thanks!

  Read the article

• CentOS - dual boot from new partition

  - by Dima

  I need to install two copies of the CentOS 5.5 (bank A and bank B) on different partitions of the same hard disk and install grub boot loader to another partition (visible from both banks). The boot loader should redirect the boot menu to bank A or bank B (according to the configuration). The new partition is mounted to /common_partition and grub is installed on it using following command: grub-install /dev/hda In the new partition I'm created the following menu.lst file: title BOOTCONTROL REDIRECT : PLEASE WAIT root (hd0,1) configfile /boot/menu.lst boot On my setup: both partitions (bank A and bank B) are primary and grub is installed on MBR. The problem is: but the new boot loader (on common_partition) did not load. What wrong on my configuration?

  Read the article

• Recovering/Creating NewWorld Partition on Mac G4 (PPC) after botched Debian Install

  - by Luis Espinal

  I was trying to install Debian 5.04 on a Mac G4, and in typical geek tradition, I didn't RTFM. During installation, I nuked all existing partitions, creating new to my liking. But as I learned later during the installation process, yaboot needed a NewWorld partition, so I can't boot the installation. I don't have any OSX CDs with me (this is a used G4 I purchased of craigslist) with which to create a HFS partition. I've re-run the Debian installer, which lets me create a partition that is supposed to be of type 'NewWorld', but the installer does not seem to like it or recognizes it. Any ideas how to proceed from here? Thanks.

  Read the article

• Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

  - by William Hooper

  My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

  Read the article

• Recovering/Creating NewWorld Partition on Mac G4 (PPC) after botched Debian Install

  - by Luis Espinal

  I was trying to install Debian 5.04 on a Mac G4, and in typical geek tradition, I didn't RTFM. During installation, I nuked all existing partitions, creating new to my liking. But as I learned later during the installation process, yaboot needed a NewWorld partition, so I can't boot the installation. I don't have any OSX CDs with me (this is a used G4 I purchased of craigslist) with which to create a HFS partition. I've re-run the Debian installer, which lets me create a partition that is supposed to be of type 'NewWorld', but the installer does not seem to like it or recognizes it. Any ideas how to proceed from here? Thanks.

  Read the article

• Live resize of a GPT partition on Linux

  - by cyberz

  On Linux I used to resize MBR partitions using fdisk, even on live filesystems, and then issue a resize2fs/pvresize/... (depending on fs type) to get the new space allocated. Lately I've been using Xen and GPT partitions, and I've noticed that unfortunately parted doesn't seem to allow on-the-fly resizing of a mounted partition, in fact it will complain: Error: Partition XXX is being used. You must unmount it before you modify it with Parted. I've tried both the resize command and even rm + mkpart combination, but they will both complain about the partition being mounted. How can I do that?

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Resizing partition in VMware Fusion didn't work

  - by Robot

  I migrated a Parallels VM to VMware Fusion. That worked well, although the original partition size was way too small (8GB). Following some instructions from VMware, I used the Fusion GUI to extend the size of the disk to 20GB, and then I booted from a GPartEd LiveCD to grow the C: partition to the full 20GB. That seemed to work, and I can see that the disk is 20GB in Disk Manager, but it still thinks the actual partition is 8GB. Here is a screenshot of it. What can I do to get the entire 20GB usable?

  Read the article

• How to format the not used OS partition?

  - by Eslam

  I have two operating systems on two different partitions, & I want to format the not used partition. When I right-click on it to choose format, the formatting process doesn't complete & a message appears saying (windows was unable to complete the format). So I need to know another way to format this partition Note: I use windows xp sp2, & i use partition (D) & i want to format the (C) & i don't know how to do that through command line, if it possible i will be so grateful Thanks

  Read the article

• Minimum size of a boot partition on debian

  - by zebonaut

  I'm setting up an old box with Debian. First etch (4.0), because this is the last version that still had boot floppies, then the box is to be upgraded to lenny (5.0) and squeeze (6.0). Therefore, I will end up having a a couple of different kernel versions in the boot partition. If I don't want to be wasteful and if I end up needing a separate boot partition, how large should it be? I've used 10 MB long ago, but that was woody, and only one kernel in the boot partition, and this seems to be too small for what I want to do now.

  Read the article

• Windows 7 System Image Backup - Exclude a partition

  - by Ctroy

  When I choose the "Create System Image" option in Windows Backup & Restore, it says that it will take system image of my C:\ and V:\ partitions. My Windows 7 is installed on V: and I use C:\ for taking backups. Now, my question is, is it possible to ignore taking backup of C:\ partition? I only want to get a copy of system image of V: By the way, I used to have Vista on my C:\ partition sometime ago and I formatted it recently to use the partition for taking backups.

  Read the article

• Creating ISO image of NTFS partition in Ubuntu

  - by Pappai

  Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an ISO image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• I shrunk the Windows partition, now it says grub rescue on boot

  - by user1009013

  I have got a machine with dual-boot Windows 7 and Ubuntu 11.10, and I wanted to add another OS to that (Jolicloud), so I started the partition manager in Windows and shrunk the Windows partition by about 10 GB (so now I have:Windows;currently empty 10GB;Ubuntu). I shutted down the computer because I was finished. Now when I started my machine again it says error:no such partition. grub rescue> and I can type commands. ls gives (hd0) (hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1) (fd0) if that helps

  Read the article

• Deleting a partition on dual boot

  - by blade4

  I have split my C:\ physical disk into 3 seperate partitions: C, H, and K. C has my original OS and is the active partition, H has another OS (dual boot), and K has song files. I want to keep the other OS (Windows Server) and when I am in this OS, I can't delete C ("Windows cannot format this partition"). What is the best way for me to get rid of C, keep all the songs intact, and the Server OS partition, so I replace C with another OS, and then get rid of the original Windows Server OS (So revert the dual boot to a single boot).

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >