Search Results

Search found 6200 results on 248 pages for 'partition recovery'.

Page 40/248 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • How does the process of disk partitioning actually work on most HDD's?

    - by Dark Templar
    From what I know of most laptops, you are able to "partition" your disk into as many other drives as you please. The more you cut it up, the smaller your partitions are, but from an organizational point of view, this may be desirable... I was wondering how the filesystem itself becomes partitioned underneath the partitions visible to the user. For instance, a laptop disk is usually divided into platters, each with two surfaces. The surfaces are further divided into "tracks". I guess what I am asking is, is it possible to identify how the disk itself keeps track of partitions? (whether each partition has its own platter? each partition has its own set of adjacent tracks? or some other configuration, or whether the data from different partitions are just randomly interleaved and scattered throughout the disk?)

    Read the article

  • my partition has lost

    - by Mahmoud20070
    The problem begins here: http://askubuntu.com/questions/118224/i-have-big-problem-with-mount-partition. I tried to solve the problem by myself, but I messed up. I opened gparted magic and opened my hard disk and chose Create Partition Table and the disaster was done. All the partitions on my hard disk (500 GB) have been removed. What can I do? I tried to use PTDD Partition Table Doctor 3.5, but it didn't help. This drive had important data that I need to get back.

    Read the article

  • How to Completely delete my USB thumbstick?

    - by Roi
    I own a Kingston thumb-stick. I have installed a Google Chrome OS image to it so I could try it out. When it did so, it created 3 partitions (I backed everything and the software that installed Chrome OS delete my thumb-stick completely and created 3 partitions). Now I want to get it back to 1 partition but when I go to Disk Management, it will not let me "extend" the partition. I have tried different partitioning tools but they didn't recognize my thumb-stick anyway. I have also tried DiskPart to no avail. Is there any software that will completely format my thumb-stick so I would only have 1 partition?

    Read the article

  • Creating image of NTFS partition in Ubuntu

    - by Pappai
    Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

    Read the article

  • different folders in a partition as mount points?

    - by ajsie
    i want to have 2 partitions. one is called system. the other is private. in the private partition i've got some folders i want to mount into system as system folders. folders in private: - www - home mount points in system: - /var/www - /home is this possible? cause it seems that you can only specify a whole partition to use for a mount point and not a folder in a partition or am i wrong? i run ubuntu server. cheers

    Read the article

  • Use `dd` linux program to save / recover a disk's MBR

    - by Graduate
    I have an Ubuntu OS installed on my laptop. I want to install Windows 7 as well to another disk partition (I will do it by recovering it from a special partition on my laptop). After installing Windows, I want to recover my hard drive MBR to be able to load Ubuntu. I have a plan to use linux dd program: 1) (Before installing, perform this command in Linux) dd if=/dev/sda of=/home/user/mbr_backup bs=512 count=1 2) (after installing, load Ubuntu Live CD and launch this) dd if=/home/user/mbr_backup of=/dev/sda bs=512 count=1 3) Load Ubuntu on PC and re-configure the GRUB2 to be able start Windows I need your advice, I want to be sure I won't damage the disk (it's partition table).

    Read the article

  • NetBackup with VSS and Instant Recovery - Failing to delete old snapshots

    - by Jonathan Bourke
    We are attempting to implement Microsoft VSS for snap-shotting in our NetBackup 6.5.3.1 environment. The clients are both 32 & 64 bit Windows 2003 Server. Snapshot parameters are: Instant recovery is enabled Maximum snapshots = 1 Provider type = 1 (System) Snapshot attribute = 1 (Differential) All backups successfully complete, and VSS shadows are successfully created both for the snapshot backup and for the open files (shadow copy components). The Issue: NetBackup is not clearing or overwriting old snapshots with each successive backup. When we list shadows, and shadow storage, it is increasing and increasing. IT is not honouring the Maximum Snapshot setting. The Logs: The bpfis log doesn’t really appear to show any errors other than for methods which we are not employing (VxVM, Flashsnap, etc.). A section is as follows: 11:54:10.744 [348.4724] <2> logparams: D:\Program Files\Veritas\NetBackup\bin\bpfis.exe delete -nbu -id htpststr001.san.mgmt.det_1248918143 -bpstart_to 300 -bpend_to 300 -clnt htpststr001.san.mgmt.det 11:54:10.744 [348.4724] <4> bpfis: INF - BACKUP START 348 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: FlashSnap, type: FIM, function: FlashSnap_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: FlashSnap_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: vxvm, type: FIM, function: vxvm_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vxvm_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <4> onlfi_thaw: Thawing C:\ using snapshot method VSS. 11:54:11.713 [348.4724] <2> onlfi_vfms_logf: vfm_thaw: delete snapshot ... 11:54:11.744 [348.4724] <2> onlfi_vfms_logf: snapshot services: emcclariionfi:Thu Jul 30 2009 11:54:11.744000 <Thread id - 4724> Unable to import any login credentials for any appliances. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpevafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> CHpEvaPlugin::init: CLI tool is not installed. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpmsafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> No array mangement credentials are available in configuration file. 11:54:13.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:13.806 [348.4724] <4> onlfi_thaw: Thawing D:\ using snapshot method VSS. 11:54:15.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0.fiid 11:54:19.853 [348.4724] <4> bpfis: INF - EXIT STATUS 0: the requested operation was successfully completed The Question: Has anyone any experience of NetBackup / VSS not clearing snapshots after backups? We will ultimately be using a HP EVA for the snapshots, but we want to ensure correct functioning at a VSS level before we go further. Regards, Jonathan (PS: Question previously posted by my colleague on entsupport.symantec.com)

    Read the article

  • NetBackup with VSS and Instant Recovery - Failing to delete old snapshots

    - by Jonathan Bourke
    We are attempting to implement Microsoft VSS for snap-shotting in our NetBackup 6.5.3.1 environment. The clients are both 32 & 64 bit Windows 2003 Server. Snapshot parameters are: Instant recovery is enabled Maximum snapshots = 1 Provider type = 1 (System) Snapshot attribute = 1 (Differential) All backups successfully complete, and VSS shadows are successfully created both for the snapshot backup and for the open files (shadow copy components). The Issue: NetBackup is not clearing or overwriting old snapshots with each successive backup. When we list shadows, and shadow storage, it is increasing and increasing. IT is not honouring the Maximum Snapshot setting. The Logs: The bpfis log doesn’t really appear to show any errors other than for methods which we are not employing (VxVM, Flashsnap, etc.). A section is as follows: 11:54:10.744 [348.4724] <2> logparams: D:\Program Files\Veritas\NetBackup\bin\bpfis.exe delete -nbu -id htpststr001.san.mgmt.det_1248918143 -bpstart_to 300 -bpend_to 300 -clnt htpststr001.san.mgmt.det 11:54:10.744 [348.4724] <4> bpfis: INF - BACKUP START 348 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: FlashSnap, type: FIM, function: FlashSnap_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: FlashSnap_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: vxvm, type: FIM, function: vxvm_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vxvm_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <4> onlfi_thaw: Thawing C:\ using snapshot method VSS. 11:54:11.713 [348.4724] <2> onlfi_vfms_logf: vfm_thaw: delete snapshot ... 11:54:11.744 [348.4724] <2> onlfi_vfms_logf: snapshot services: emcclariionfi:Thu Jul 30 2009 11:54:11.744000 <Thread id - 4724> Unable to import any login credentials for any appliances. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpevafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> CHpEvaPlugin::init: CLI tool is not installed. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpmsafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> No array mangement credentials are available in configuration file. 11:54:13.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:13.806 [348.4724] <4> onlfi_thaw: Thawing D:\ using snapshot method VSS. 11:54:15.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0.fiid 11:54:19.853 [348.4724] <4> bpfis: INF - EXIT STATUS 0: the requested operation was successfully completed The Question: Has anyone any experience of NetBackup / VSS not clearing snapshots after backups? We will ultimately be using a HP EVA for the snapshots, but we want to ensure correct functioning at a VSS level before we go further. Regards, Jonathan (PS: Question previously posted by my colleague on entsupport.symantec.com)

    Read the article

  • TPM had to be reintialized: Does a new recovery password have to be uploaded to AD?

    - by MDMoore313
    Some way some how, a user's machine couldn't get read the bitlocker password off of the TPM chip, and I had to enter the recovery key (stored in AD) to get in. No big deal, but once in the machine, I tried to suspend bitlocker per recovery documentation, and got an error message about the TPM not being initialized. I knew the TPM was on and activated in the BIOS, but Windows still made me reinitialize the TPM chip, and in the process it created a new TPM owner password. I found that odd because it prompted me to save this password or print it (there wasn't an option not to), but it made no reference of a recovery password, nor did it back this password up to AD. After the user took her laptop and left I started thinking that if the TPM password change, does the recovery password change also? If so, that new recovery password will need to be uploaded to AD, but MS' documentation doesn't make that clear, and doesn't back up the new recovery key (if one exists) to AD automatically when the group policy says it must, and from a network standpoint AD is accessible.

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • Linux software raid fails to include one device for one RAID1 array

    - by user1389890
    One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

    Read the article

  • Upon reboot, Linux software raid fails to include one device of a RAID1 array

    - by user1389890
    One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

    Read the article

  • RAR password recovery on GPU using ATI Stream processor

    - by Wajdy Essam
    Hello, I'm newbie in GPU programming , and i work on brute force RAR Password Recovery on ATI Stream Processor using brook+ language, but i see that the kernel written in brook+ language doesn't allow any calling to normal functions (except kernel functions) , my questions is : 1) how to use unrar.dll (to unrar archive files) API in this situation? and is this the only way to program RAR password recovery? 2) what about crack and ElcomSoft software that use GPU , how they work ? 3) what exactly the role for the function work inside GPU (ATI Stream processor or CUDA) in this program? 4) is nVidia/CUDA technology is easier/more flexible than ATI/brook+ language ?

    Read the article

  • Configuring MySQL for Power Failure

    - by Farrukh Arshad
    I have absolutely no experience with databases and MySql. Now the problem is I have an embedded device running a MySQL database with a web based application. The problem is when I shutdown my embedded device it just cut off the power, and I can not have a controlled shutdown. Given this situation how can I configure MySql to prevent it from failures and in case of a failure, I should have maximum support to recover my database. While searching this, I came across InnoDB Engine as well as some configuration options to set like sync_binlog=1 & innodb_flush_log_at_trx_commit=1. I have noticed my default Engine is InnoDB and binary logs are also enabled. What are other configurations to make for best possible failure & recovery support. Updated: I will be using InnoDB engine which supports Transactions. My question is how best I can configure it (InnoDB + MySQL) so that it can provide best possible fail-safe as well as crash recovery mechanism. One configuration option I came across is to enable binary logging which InnoDB uses at the time of recovery. Regards, Farrukh Arshad

    Read the article

  • Automatic o/s reset on a dedicated internet browsing Windows 7 pc.

    - by camelCase
    I have just purchased a new Acer Revo nettop PC for dedicated internet browsing. It will be the only pc on a home network. My original plan was to install one virtual PC for family browsing, another for remote web based server administration and ban browser use from the host Windows 7 o/s. The idea was that I could recover to a fresh VHD image once a week to eliminate any build up of malware inside the browser VMs. However now I am looking for alternative solutions since the Intel Atom cpu does not have hardware VT support which Windows Virtual PC requires. Would it be possible to engineer some type of routine overnight host o/s wipe and recovery? I guess cyber cafes do something like this? The only user data that would need to be retained across a recovery would be browser bookmarks but these could be exported to remote service. Edit 1: I am thinking the o/s reset could be done via some disk image recovery process. Edit 2: Just had a brainwave. Routine browsing could be done via the new Google Chrome O/S. I have just seen a video of the Google Chrome o/s booting off a usb pen drive in seconds.

    Read the article

  • Windows Server wbadmin recover with commas

    - by dlp
    I want to do a recovery of files with commas in their names from the command line, ala: wbadmin start recovery -version:10/01/2013-12:00 -itemType:File -overwite:Overwrite -quiet "-Items:C:\Path\To\File, With Comma.txt,C:\Path\To\File 2, With Comma.txt" So there are two files: C:\Path\To\File, With Comma.txt C:\Path\To\File 2, With Comma.txt The problem is wbadmin assumes commas separates each file, so it sees 4 files specified instead of 2. I've tried putting a \ in front of commas that are part of the file names like so: wbadmin start recovery -version:10/01/2013-12:00 -itemType:File -overwite:Overwrite -quiet "-Items:C:\Path\To\File\, With Comma.txt,C:\Path\To\File 2\, With Comma.txt" but it doesn't work, it just says there's a syntax error. The documentation on Technet doesn't seem to mention anything that'll help either. OS is Windows Server 2008 R2. A clarifying comment: I've changed the file names to be different than the actual names to be less revealing, but I also see I dumbed it down too much. The comma can occur either in the file name itself like C:\Path\To\File, With Comma.txt' or in the path to the file, like:C:\Path, To\Other\File.txt`.

    Read the article

  • Could replacing an old hard drive's circuit board make it work again?

    - by oscilatingcretin
    I have a 12-year-old, 10gb Maxtor drive that died on me around 7 years ago, but I have not had the heart to throw it away. When the computer powers on, it whirrs silently as it tries to spin up and then it stops. So, a few years ago, I sent it off for professional data recovery. They were able to retrieve quite a bit from it, but I know there's a bunch more there. It only cost $700, so I just chalked up the lackluster recovery effort to "you get what you pay for" considering that most companies will charge you several thousands of dollars for this kind of data recovery. When they sent the drive back, I couldn't help but plug it back in just to see if maybe they unjammed something in the process of disassembling/reassembling the drive. To my surprise, the drive had a much healthier spin-up sound and actually stayed spinning for several minutes before winding down to a halt. Windows is even able to detect and interact with the drive, but I get I/O errors after so many minutes of waiting for it to mount. Before I start doing stupid stuff with it like dropping it on the ground, freezing it, crapping on it, etc, I decided to buy the exact same model off Ebay so that I could swap the circuit boards as a last-ditch effort. While it's en route, I thought I'd come here to ask if this is even a worthwhile effort and, if even remotely so, what should I know before ripping off the old board and slapping on the new?

    Read the article

  • What's the proper way to prepare chroot to recover a broken Linux installation?

    - by ~quack
    This question relates to questions that are asked often. The procedure is frequently mentioned or linked to offsite, but is not often clearly and correctly stated. In an objective to concentrate useful information in one place, this question seeks to provide a clear, correct reference for this procedure. What are the proper steps to prepare a chroot environment for a recovery procedure? In many situations, repairing a broken Linux installation is best done from within the installation. But if the system won't boot, how do you fix it from within? Let's assume you manage to boot into an alternate system. Once there, you need to access your broken installation in order to fix it. Many recovery How-Tos recommend using chroot in order to run programs as if you are actually booted into the broken installation. What is the basic procedure? Are there accepted best-practices to follow? What variables need to be considered in order to adapt the basic preparation steps to a particular recovery task? As this is Community Wiki, feel free to edit this question to improve it as well.

    Read the article

  • I just deleted my backup file! How do I save it?

    - by Sammy
    I just accidentally deleted a backup file that I need to restore my system. It's an Acronis True Image TIB file. It was stored at H:\My backups and the name of the file was File_backup_2012-10-18.tib. I did a quick scan with Recuva 1.43.623 and it found the file using the recovery wizard, but it was unable to recover it. The "state" of the file is "unrecoverable". So the resulting file is 0 byte. I am trying to do a deep scan with Recuva right now but it takes a lot of time. If it should fail, what other recovery option do I have? Is there any other good file recovery software that's free to use for home users? I do have a second copy of the whole system partition, but I needed this file backup copy because it is more up to date. That's the file, right there! But why is Recuva unable to recover it?

    Read the article

  • What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the slowness of windows OS once again. It's Time to change with the Ubuntu 10.10 64bit for I like to use a faster Operating System. My Hard Disk laptop has a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything bad happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,ad Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I wanted to make: * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Extended)(sda3) (Ubuntu 10.10 64bit) * Linux home Ext3 - 90GB (Extended)(sda4) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda5) * Linux root Ext3- 18GB (Extended) (sda6) (OpenSuse or Puppy or kubuntu) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195,1GB (Logical) * Linux root Ext4- 10GB (Extended) (sda4) * Linux swap swap- RAMx2 size, 6,1GB (sda5) * Linux home Ext3- 179GB (Extended) (sda6) When I installed Ubuntu,I didn't know if I could wipe all previous partitions,because of the RECOVERY partition. So I just made the space for my extended partition with GParted by deleting the HP_TOOLS (Fat32). By doing this I managed somehow to install Ubuntu 64 with Success. And I also made the partitions for the swap or a third Linux OS as Jordan suggested. But I couldn't actually make the partitions for the shared NTFS.(no option!) Question 1: What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • i dont see the option to save the partition table

    - by Bipin Neupane
    the issue is this Undo the CLEAN command on the portable hdd : DISKPART unfortunately at step no 10, i dont see the option to save the partition table.but there are options for: deeper search quit write a partition. wat should i do?plz help(i run testdrive 6.14) here is how this happened... I ran cmd then diskpart then selected the volume used 'CLEAN' command to clear the configuration (accidentally) does reinstalling my windows solve this ? will my hard drive work on other computers?

    Read the article

  • Uninstall Linux Mint without deleting partition?

    - by user3525308
    I've got a dual-boot system using Windows 7 and Linux Mint 13. When I first installed Mint using the regular Mint installer, the installer did not give me the option of partitioning my drive, presumably because my computer already had 4 partitions. I decided that I wanted to uninstall Mint and opt for Ubuntu instead, but I have no idea how to remove Mint! Every guide I look at tells me to just delete/reformat the Linux partition... But in my case, no separate partition exists.

    Read the article

  • Linux not picking up new partition correctly on emc pseudo device

    - by James
    Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

    Read the article

  • SSD with multiple partitions - disk life implications

    - by Nicolas Webb
    Each block on a SSD has a finite number of writes. This is mitigated on modern drives by "spreading" the writes around as you use the drive. I'm wondering if you partition a SSD into several partitions (a Mac using Boot Camp, for example) if this measure is defeated somewhat - can the writes be spread across the entire drive? Or are they contained strictly within the partition boundaries? Any SSD controller engineers here :)?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >