Search Results

Search found 7072 results on 283 pages for 'peopletools 8 50'.

Page 39/283 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Linux buffer cache effect on IO writes?

  - by Patrick LeBoutillier

  Hi, I'm copying large files (3 x 30G) between 2 filesystems on a Linux server (kernel 2.6.37, 16 cores, 32G RAM) and I'm getting poor performance. I suspect that the usage of the buffer cache is killing the I/O performance. To try and narrow down the problem I used fio directly on the SAS disk to monitor the performance. Here is the output of 2 fio runs (the first with direct=1, the second one direct=0): Config: [test] rw=write blocksize=32k size=20G filename=/dev/sda # direct=1 Run 1: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/205M /s] [0/6K iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4667 write: io=20,480MB, bw=199MB/s, iops=6,381, runt=102698msec clat (usec): min=104, max=13,388, avg=152.06, stdev=72.43 bw (KB/s) : min=192448, max=213824, per=100.01%, avg=204232.82, stdev=4084.67 cpu : usr=3.37%, sys=16.55%, ctx=655410, majf=0, minf=29 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 250=99.50%, 500=0.45%, 750=0.01%, 1000=0.01% lat (msec): 2=0.01%, 4=0.02%, 10=0.01%, 20=0.01% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=199MB/s, minb=204MB/s, maxb=204MB/s, mint=102698msec, maxt=102698msec Disk stats (read/write): sda: ios=0/655238, merge=0/0, ticks=0/79552, in_queue=78640, util=76.55% Run 2: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/0K /s] [0/0 iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4733 write: io=20,480MB, bw=91,265KB/s, iops=2,852, runt=229786msec clat (usec): min=16, max=127K, avg=349.53, stdev=4694.98 bw (KB/s) : min=56013, max=1390016, per=101.47%, avg=92607.31, stdev=167453.17 cpu : usr=0.41%, sys=6.93%, ctx=21128, majf=0, minf=33 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 20=5.53%, 50=93.89%, 100=0.02%, 250=0.01%, 500=0.01% lat (msec): 2=0.01%, 4=0.01%, 10=0.01%, 20=0.01%, 50=0.12% lat (msec): 100=0.38%, 250=0.04% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=91,265KB/s, minb=93,455KB/s, maxb=93,455KB/s, mint=229786msec, maxt=229786msec Disk stats (read/write): sda: ios=8/79811, merge=7/7721388, ticks=9/32418456, in_queue=32471983, util=98.98% I'm not knowledgeable enough with fio to interpret the results, but I don't expect the overall performance using the buffer cache to be 50% less than with O_DIRECT. Can someone help me interpret the fio output? Are there any kernel tunings that could fix/minimize the problem? Thanks a lot,

  Read the article

• Automatically keeping two excel data tables in-sync (w/out VBA)

  - by Neil

  I'm putting together a workbook for tracking a stock portfolio. The primary sheet contains a table with the list of the transactions. From this I would like to create an overview table on another sheet with only one row per unique stock symbol that includes things like cost basis, returns, etc. The problem is that nothing I've tried updates the overview table correctly when rows are added to the transaction table. The closest I've got is something like the following: http://www.get-digital-help.com/2009/04/14/create-a-unique-alphabetically-sorted-list-extracted-from-a-column/ However, this requires applying that formula to every cell in the primary column of the overview sheet. And even then the range of the table isn't extended down to include new rows as they become valid. Essentially I'm looking for a way that auto-adds rows to a table and copies the formula based on a different table changing without using VBA. Trivial example data Sheet1 Symbol Type Shares Price F Buy 100 12 MSFT Buy 100 25 MSFT Sell 50 28 F Buy 100 16 Sheet2 Symbol Quantity F 200 MSFT 50

  Read the article

• Will my laptop be ok with this different laptop charger?

  - by tidbits

  So the original laptop charger broke and I switched to a charger from a laptop that I no longer use. The specifications from each are: Original Input:AC 100-240V 1.5A 50-60Hz Output: DC 19V 3.42A Other Charger Input: AC 100-240V 1.5A 50-60Hz Output: 20V 3.25A Yes, the polarity is the same. Also, the wattage has a difference of .02 from what I understand. Is wattage ever important, and more specifically, a wattage difference of that size. Feel free to ask me any other questions about the chargers and I'll answer them to the best of my ability.

  Read the article

• How do you create a dynamic excel chart?

  - by Haris

  I am looking at creating an Excel chart that offers some interactivity. Basically, at the moment I have a chart that is detailing progress (in %) using bars. But that progress is usually made up of several other aspects. So you could have an overall progress of say 50% which would then be broken down into Graphics 75%, Sound 25%, Gameplay 50%. Now what I'd like to do is find a way to stack those bars, so that I have the bar showing the overall progress and only when I click on that bar the other, more detailed progress bars appear. Is there a way to do this in Excel? Thanks in advance!

  Read the article

• Connection drops while transferring large files to one server on a network

  - by Charlotte

  My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

  Read the article

• Linux Router - Share bandwidth per IPs with current active connections

  - by SRoe

  We have a Linux machine running as a custom router, currently utilising Shorewall. This sits between our incoming internet connection and the internal LAN. What we would like to achieve is 'fair use' of the bandwidth on a per IP basis. If only one person currently has an active connection then they get 100% utilisation of the line. However if 20 people have active connections then they should each get 5% utilisation of the line. This should be irrespective of the number of connections held by each user. For example, say we have two users, Bill and Ted, that both have active connections. Bill has a single active connection while Ted has ten active connections. Bill should get 50% utilisation for his single connections whilst Ted should get 5% utilisation for each of his ten connections, giving Ted a total utilisation of 50%.

  Read the article

• nginx+php-fpm help optimize configs

  - by Dmitro

  I have 3 servers. First server (CPU - model name: 06/17, 2.66GHz, 4 cores, 8GB RAM) have nginx as load balancer with next config upstream lb_mydomain { server mydomain.ru:81 weight=2; server 66.0.0.18 weight=6; } server { listen 80; server_name ~(?!mydomain.ru)(.*); client_max_body_size 20m; location / { proxy_pass http://lb_mydomain; proxy_redirect off; proxy_set_header Connection close; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass_header Set-Cookie; proxy_pass_header P3P; proxy_pass_header Content-Type; proxy_pass_header Content-Disposition; proxy_pass_header Content-Length; } } And configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 80 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 pm.status_path = /status ping.path = /ping ;ping.response = pong request_terminate_timeout = 30s request_slowlog_timeout = 10s slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 20 php-fpm processes which use from 1% - 15% CPU. So it's have high load averadge: top - 15:36:22 up 34 days, 20:54, 1 user, load average: 5.98, 7.75, 8.78 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 34.1%us, 3.2%sy, 0.0%ni, 37.0%id, 24.8%wa, 0.0%hi, 0.9%si, 0.0%st Mem: 8183228k total, 7538584k used, 644644k free, 351136k buffers Swap: 9936892k total, 14636k used, 9922256k free, 990540k cached Second server(CPU - model name: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 8 cores, 8GB RAM). Nginx configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config of php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 50 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong ;request_terminate_timeout = 0 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 50 php-fpm processes which use from 10% - 25% CPU. So it's have high load averadge: top - 15:53:05 up 33 days, 1:15, 1 user, load average: 41.35, 40.28, 39.61 Tasks: 239 total, 40 running, 199 sleeping, 0 stopped, 0 zombie Cpu(s): 96.5%us, 3.1%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.4%si, 0.0%st Mem: 8185560k total, 7804224k used, 381336k free, 161648k buffers Swap: 19802108k total, 16k used, 19802092k free, 5068112k cached Third server is server with database postgresql. Also i try ab -n 50 -c 5 http://www.mydomain.ru/ And I get next info: Complete requests: 50 Failed requests: 48 (Connect: 0, Receive: 0, Length: 48, Exceptions: 0) Write errors: 0 Total transferred: 9271367 bytes HTML transferred: 9247767 bytes Requests per second: 1.02 [#/sec] (mean) Time per request: 4882.427 [ms] (mean) Time per request: 976.486 [ms] (mean, across all concurrent requests) Transfer rate: 185.44 [Kbytes/sec] received Please advise how can I make lower level of load average?

  Read the article

• SQL Server 2005 / 2008 Licensing question

  - by Jose

  I have read up online, and through some threads here like this one. But I'm still confused and need to see if anyone can shed some light. My company is deploying a clickonce application that will be on multiple computers (about 50). It will be accessing an SQL Server database and I was wondering what kind of SQL Server licensing should I/need to have? The application currently logs in via SQL Server authentication using one SQL Server user. It seems logical that I would just need one user CAL and even through there will be up to 50 connections it should all still work. Am I right?

  Read the article

• Video/Animated GIF advanced frame editor?

  - by meder

  What sort of application could I use for example if I had a 5 minute video or an animated GIF with 50 frames, and I wanted to basically Photoshop replace an object, say a person's head, with another image for all those 50 frames? Is there some sort of smart tool that can do this or do I have to edit every single frame by hand? I wouldn't mind there being a tool where I can paste the image in every frame automatically, and switch from frame to frame adjusting the position of it, I just need something efficient. I've tried using Photoshop's import video into image sequence and tried editing with the animation toolbar at the bottom, but it's not quite what I want. I don't care if it's free software or not, I'm primarily using Linux but I have VirtualBox Windows XP if there's an excellent application that's not available otherwise.

  Read the article

• NMap route determination on Windows 7 x64

  - by user30772

  C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

  Read the article

• The ping response time doesn't reflect the real network response time

  - by yangchenyun

  I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

  Read the article

• Why is my eth0 getting a dynamic ip when it is configured to be static?

  - by sdek

  For some reason our office linux box is being assigned an ip address via dhcp and I don't know why. What is confusing to me is that when I check system-config-network it shows that my eth0 is setup to be a static ip address. And /etc/sysconfig/network-scripts/ifcfg-eth0 also shows it is setup to be a static ip, yet it is getting a different ip address than the one specified in the ifcfg-eth0. Let me know if you have any suggestions on or ideas on where I can look next. Here are a few details that might help you figure out what an idiot I am :) Fedora 11 Router in front of this box is running dhcp, starting at 10.42.1.100 This box is configured to be 10.42.1.50 (at least I think it is!), subnet 255.255.255.0 (which is same as the router's lan subnet) Instead of having the static IP, this box is getting assigned 10.42.1.100. Here are the ifcfg-eth0 details DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no NM_CONTROLLED=no NETMASK=255.255.255.0 IPADDR=10.42.1.50 GATEWAY=10.42.1.1

  Read the article

• Why does my computer slow down so much when attaching Bluetooth dongle?

  - by Jeff Yates

  I have a Bluetooth dongle and I plugged it into my work laptop (a Dell Latitude D830). Windows detects the Generic Bluetooth USB or similar and then proceeds to go incredibly slow with a process, avp.exe¹, taking 50% CPU. The System Idle process is getting most of the other 50% CPU and the avp.exe process is only at Normal priority. The machine doesn't seem to recover, so I had to turn the power off and reboot. Now, I haven't installed the drivers yet for the device, which I am doing now and I expect it to resolve the problem, so I am not asking how to fix this. I would rather know why Windows goes so slow in the first place. What is it trying to do and failing at so badly that it barely crawls? ¹ Part of Kaspersky Internet Security suite

  Read the article

• Dovecot ignoring maximum number of IMAP connections

  - by Michelle

  I have a single mailbox mail server running Dovecot/Postfix and I have two IMAP clients, Thunderbird on the PC and K9 on Android. I keep on receiving this error in my logs even after I change the 'mail_max_userip_connections' variable to 50. puppet dovecot: imap-login: Maximum number of connections from user+IP exceeded (mail_max_userip_connections=10): user=<[email protected]>, method=PLAIN, rip=62.242.90.2, lip=198.29.31.229, TLS Why does it say that it is set to 10 in the log? Is that hardcoded? grep -r "mail_max_userip_connections" /etc/dovecot /etc/dovecot/conf.d/20-managesieve.conf: #mail_max_userip_connections = 10 /etc/dovecot/conf.d/20-pop3.conf: #mail_max_userip_connections = 3 /etc/dovecot/conf.d/20-imap.conf: mail_max_userip_connections = 50 I've restarted dovecot after making the changes but this error is still logged and I can't access the mailbox. Can anyone help me understand why I can't seem to raise the maximum limit?

  Read the article

• Join .doc files into one .doc (with keeping the original format of every document)

  - by Shiki

  I have about ~50 .doc files, that look perfect (they are extracted with Able2Extract). Now I want to join these 50 files into one huge .doc. I've tried using Word's in-built "Insert" feature, but that messed up the whole format. I want to keep everything I have. Like just document1 - document2 - document3. Nothing "intelligent" or "smart" needed during the conversion, just the capability of joining them. (Thus making them all searchable, that's the ultimate aim.) I don't mind if the method/solution applies a single blank page at every document end either.

  Read the article

• Excel - Linking multiple source spreadsheets with variable amounts of rows to a destination spreadsh

  - by Emilio

  I have multiple source spreadsheets, each with a variable number of rows. An example might be one spreadsheet per bank account, with one row for each transaction, with a date and amount. One spreadsheet might have 30 rows, the other 50, and so on. I want to create another spreadsheet which links to the various source spreadsheets and lists an aggregate of all transactions from all sources. So if 3 source sheets with 30, 50 and 20 rows respectively, the destination sheet would have 100 rows. The number of rows (transactions) in the source sheets can grow or shrink over time. I'd like the destination sheet to show one contiguous list of transactions without gaps (spaces). How can I do this?

  Read the article

• Internet connectivity issues with one router but work ok with other router

  - by user825904

  I have one Tplink ADSL ROUTER and when i enter username and password on setup page then everything works fine. Now i have one more router Netgear router then when i enter same username and password then interworks ok for some 50% websites but for other 50% websites the page is not loaded and it hangs there. In the sats bar it says website found , waiting for reply and it hnags there and no site is displayed. I wonder which setting is different on these two routers. The Tplink router i have bought is from local shop but netgear router is from different country. Can that make some difference

  Read the article

• What's the proper format for an SPF record?

  - by deltanovember

  Querying my domain I get: The TXT records found for your domain are: v=spf1 ip4:50.22.72.198 a mx:wordswithfriends.net ~all So superficially it appears OK. However I also get the following message SPF records should also be published in DNS as type SPF records. No type SPF records found. I want to make sure things are absolutely airtight. So in addition to TXT records I also want a pure SPF record. However I cannot figure out the format. Placing the same text in an SPF record does not seem to work. Edit: At the moment I have a TXT record but not SPF record. When I cut and paste from TXT straight to SPF I get some type of crazy recursive DNS error so quickly deleted the SPF. I just want to know the correct format. Copying v=spf1 ip4:50.22.72.198 a mx:wordswithfriends.net ~all Straight into an SPF record doesn't work.

  Read the article

• Windows Vista MAK keys and Volume Licensing..

  - by Physikal

  So when I go into the Volume Licensing Service Center and review our current used/available MAK activations, it says #/50. (the # being the number of our currently used). What I'm curious about, so far we only put vista on like 10 of our boxes. But over time, if we format a machine for some reason, then activate it, I'm assuming it will then in a way consume 2 keys? So what happens when we max the 50? Does that mean we have to fork over some more cash to M$? If so that's pretty lame.

  Read the article

• Apache mpm-itk Performance

  - by Matt Beckman

  I manage a bunch of VPSs with memory ranging from 1GB to 8GB. Most of these websites are Joomla websites, and the servers must support multiple sites/users/S-FTP. I use mpm-itk almost exclusively (mostly due to it's convenience in these shared environments). However, I'm aware it isn't known for performance, so I need some advice on making it faster. Due to the lack of documentation when I first went the way of mpm-itk, I included only one setting in the config, and that was to limit each user to 50 clients (the rest I left up to defaults): <IfModule mpm_itk_module> MaxClientsVHost 50 </IfModule> Are there any better alternatives available? Are there any settings supported in mpm-prefork or mpm-worker that are also supported in mpm-itk? Thanks!

  Read the article

• What is auto-mounting my media volume?

  - by user285277

  Something is repeatedly mounting my "media" share, doing something with it, then quietly un-mounting it with no notifications at the user level. from the little I can gleaned from the console messages below, I thought I'd managed to stop it, if not understand it last night when I followed instructions for deleting all traces of the Google Update Daemon. I've not been using any Google apps whatsoever, so I was surprised to see that in Console. What's more surprising, and perhaps a little distressing, is that the same thing occurred this evening, when the Google Daemon is long gone. I don't have that log because I can't recall precisely what time it occurred. I'll do a search and provide it if you wish, though. In the meantime, any help with this would be extremely appreciated. I've asked over at Apple Discussions but I think it might be a little deeper than those manning the boards this weekend are comfortable with. It's certainly beyond my meager skills. With apologies in advance if this is more lines thank you need. Please note that I've transformed the Google links a little because the forum here requires more reputation points before one can post more than two links. 12/27/13 10:47:31.000 PM kernel[0]: memorystatus_thread: idle exiting pid 53629 [distnoted] 12/27/13 10:48:10.433 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 0; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.434 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 1; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.950 PM com.apple.SecurityServer[17]: Session 103257 created 12/27/13 10:48:34.328 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 2; not stale; error: The file doesn’t exist. 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Media Archive-1, pid 53641 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80d6355008 /Volumes/Media Archive-1 (error = 0, retval = 0) 12/27/13 10:49:32.000 PM kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0 12/27/13 10:49:32.000 PM kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). 12/27/13 10:49:32.000 PM kernel[0]: en0::IO80211Interface::postMessage bssid changed 12/27/13 10:49:33.681 PM configd[16]: network changed: v4(en0-:10.0.1.12) DNS- Proxy- SMB 12/27/13 10:49:33.697 PM configd[16]: network changed: DNS* Proxy 12/27/13 10:49:35.475 PM KernelEventAgent[57]: tid 00000000 received event(s) VQ_NOTRESP (1) 12/27/13 10:49:35.000 PM kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff802176b4a0 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Media Archive-1 prevTrigger 0 currTrigger 1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 15 secs for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again 12/27/13 10:49:35.479 PM KernelEventAgent[57]: tid 00000000 type 'afpfs', mounted on '/Volumes/Media Archive-1', from '//Me@Capsule._afpovertcp._tcp.local/Media%20Archive', not responding 12/27/13 10:49:35.487 PM KernelEventAgent[57]: tid 00000000 found 1 filesystem(s) with problem(s) 12/27/13 10:49:36.692 PM com.bourgeoisbits.cloak.agent[14503]: NetworkProfile: (null), (null), (null) (Connected: NO, Airport: NO, Open: NO) [trusted] 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again 12/27/13 10:49:41.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=53662[GoogleSoftwareUp] clearing CS_VALID 12/27/13 10:49:42.102 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 2 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:42.113 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone" 12/27/13 10:49:42.116 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s). 12/27/13 10:49:42.121 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x531870 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x5302d0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x534340 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:42.130 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x1a31a90 server=<KSOmahaServer:0x534340> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=1 activeTickets=1 rollCallTickets=1 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:42.292 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:42.296 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:42.299 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again 12/27/13 10:49:43.152 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products. 12/27/13 10:49:43.153 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s). 12/27/13 10:49:43.158 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x18367a0 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x1837e10 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 >, <KSTicket:0x1834750 productID=com.google.talkplugin version=4.7.0.15362 xc=<KSPathExistenceChecker:0x1833890 path=/Library/Application Support/Google/GoogleTalkPlugin.app> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x52e930 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:43.159 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x53a210 server=<KSOmahaServer:0x52e930> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=2 activeTickets=1 rollCallTickets=2 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> <o:app appid="com.google.talkplugin" version="4.7.0.15362" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone, ... (2)) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:43.244 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:43.247 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:43.250 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:45.570 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 1 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again 12/27/13 10:49:53.828 PM KernelEventAgent[57]: tid 00000000 unmounting 1 filesystems 12/27/13 10:49:53.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Media Archive-1, flags 524288, pid 57 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: GetReconnectToken failed 32 /Volumes/Media Archive-1 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed 12/27/13 10:50:12.104 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown. 12/27/13 10:50:29.396 PM Dock[93157]: no information back from LS about running process

  Read the article

• Provision storage in SAN encironment

  - by wildchild

  hi,.. Can somebody help in understanding how Lun Provisioning is done in clariion based on client requirement. Say, a client needs one 50 GB space on the host( for application) ,two -350 GBs ( for DB and stuff) on the same host and i have 4 raid groups with space of 200 GB in one 50 GB in second and 400 GB and 400GB in rest two all having 5 disks. And , I 'm using Raid 5 only. How do i provision keeping performance in mind( so that performance hit is not there)?..And i need to understand the concept of meta head as well. Please help me by elaborating the above scenario..I am learning to provision storage in non productive environment( b'fore going ahead and working on client prod server) and i have been learning a lot from SF ...I request the seniors here to help me understand it better. Thanks for reading

  Read the article

• Why does ganglia think my host is down?

  - by NZKoz

  I have ganglia set up to monitor our staging server, it's working great but I'm confused by the definition of 'down' to ganglia. There's a single node, running gmetad, gmond and the web frontend, but some small percentage of the time the web frontend shows some confusing output. Despite the fact that it's a single server in the cluster, and that server is the one serving the web interface, the dashboard output insists that the host is down. Then below that it has a graph which shows 50% down, 50% up. You can see an example of this here: http://i.imgur.com/MCWaS.jpg There's obviously something confusing ganglia somewhere, but I'm not sure where to start looking. Unfortunately googling for any combination of 'ganglia' 'down' 'metric name' seems return nothing but other people's ganglia installations displaying the same nonsense. Any tips on where to start looking would be greatly appreciated

  Read the article

• Recommended service account setup for MS SQL Server 2005/2008

  - by boxerbucks

  We have a number of MS SQL servers in our environment running either SQL Server 2005 standard/enterprise or SQL server 2008 enterprise. Currently the SQL services are running as local service or network service and the MS recommended best practice is to run as a domain account which is what we are trying to move towards. Is the best practice with regards to domain accounts to have a separate domain account per service per server? So if we have 4 SQL services we want to run per server and we have 50 servers, we would create 50 * 4 = 200 accounts in AD? This seems excessive to me and I was wondering if anyone has any real experience with this type of setup and it's management.

  Read the article

• ffmpeg installation error

  - by Thomas

  Now that I"m down to the last part to install the FFMPEG it tells me to do the following cd /usr/local/src/ffmpeg/ ./configure --enable-libmp3lame --enable-libogg --enable-libamr-nb --enable-libamr-wb --enable-libvorbis --disable-mmx --enable-shared make make install ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50 ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51 ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49 ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0 ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51 When i get to the part ./configure --enable-libmp3lame --enable-libogg --enable-libamr-nb --enable-libamr-wb --enable-libvorbis --disable-mmx --enable-shared I get the error Unknown option "--enable-libogg". See ./configure --help for available options. I've tried removing the --enable-libogg but does not seem to help.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >