Search Results

Search found 12283 results on 492 pages for 'tcp port'.

Page 39/492 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• CentOS 6 - iptables preventing web access via port 80

  - by bsod99

  I'm setting up a new web server with CentOS 6.2 and am not able to connect via the web. Everything looks set up correctly in httpd.conf and Apache is running, so I'm assuming it's an iptables issue. Is there anything in the following which could be causing the issue? # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT)

  Read the article

• Firewall still blocking port 53 despite listing otherwise?

  - by Tom

  I have 3 nodes with virtually the same iptables rules loaded from a bash script, but one particular node is blocking traffic on port 53 despite listing it's accepting it: $ iptables --list -v Chain INPUT (policy DROP 8886 packets, 657K bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo any anywhere anywhere 2 122 ACCEPT icmp -- any any anywhere anywhere icmp echo-request 20738 5600K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- eth1 any anywhere node1.com multiport dports http,smtp 0 0 ACCEPT udp -- eth1 any anywhere ns.node1.com udp dpt:domain 0 0 ACCEPT tcp -- eth1 any anywhere ns.node1.com tcp dpt:domain 0 0 ACCEPT all -- eth0 any node2.backend anywhere 21 1260 ACCEPT all -- eth0 any node3.backend anywhere 0 0 ACCEPT all -- eth0 any node4.backend anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 15804 packets, 26M bytes) pkts bytes target prot opt in out source destination nmap -sV -p 53 ns.node1.com // From remote server Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2011-02-24 11:44 EST Interesting ports on ns.node1.com (1.2.3.4): PORT STATE SERVICE VERSION 53/tcp filtered domain Nmap finished: 1 IP address (1 host up) scanned in 0.336 seconds Any ideas? Thanks

  Read the article

• copying same file name from client to server using tcp protocol with same size of file

  - by user3686570

  This is the client and server program where a client sends a file to server to save in the server. There is a issuse in that same file name is not getting copied on the server with same file size Please help me in this Client program import socket import sys s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect(("localhost",9999)) path=raw_input("Please enter the complete PATH of your file : ") f=open (path, "rb") l = f.read(256) while (l): s.sendall(l) l = f.read(10000) s.close() Server Program import socket import sys s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.bind(("localhost",9999)) s.listen(10) while True: s, address = s.accept() print address i=1 f = open( str(i),'wb') #open in binary #i=i+1 while (True): l=s.recv(256) #while (l): f.write(l) l=s.recv(256) print 'File recieve succesfully' f.close() #sc.close() s.close() Thanks in advance

  Read the article

• Prevent Linux from processing incoming ICMP Host unreachable packets

  - by bbc

  I have a test setup with one host on a network (10.1.0.0/16) talking via TCP to another one on another network (10.2.0.0/16) and a gateway in the middle. Sometimes, the TCP connection is lost and while scanning the trace (pcap), I looks like it's because of just one ICMP Host unreachable message sent by the gateway to 10.1.0.1 at some point. 10.1.0.1 then sends a TCP RST to 10.2.0.1. In my opinion, the gateway (pfSense) is broken or not configured correctly but anyway, for testing purposes, I'd like to block this kind of ICMP on the host (10.1.0.1) before it has an influence on my TCP connection (or does it? I'm not even sure). I've tried iptables: iptables -I INPUT -i eth0 -p icmp --icmp-type host-unreachable -j DROP but while it does a good job at preventing userpace applications like ping from receiving these ICMP messages, my TCP connection still comes to an end when the alleged "killer ICMP packet" is sent by the gateway. Am I right about how it is processed? If yes, then what can I do to achieve my goal?

  Read the article

• Send raw data to USB parallel port after upgrading to 11.10 oneiric

  - by zaphod

  I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

  Read the article

• blocking port 80 via iptables

  - by JoyIan Yee-Hernandez

  I'm having problems with iptables. I am trying to block port 80 from the outside, basically plan is we just need to Tunnel via SSH then we can get on the GUI etc. on a server I have this in my rule: Chain OUTPUT (policy ACCEPT 28145 packets, 14M bytes) pkts bytes target prot opt in out source destination 0 0 DROP tcp -- * eth1 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW,ESTABLISHED And Chain INPUT (policy DROP 41 packets, 6041 bytes) 0 0 DROP tcp -- eth1 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW,ESTABLISHED Any guys wanna share some insights?

  Read the article

• Approach to Authenticate Clients to TCP Server

  - by dab

  I'm writing a Server/Client application where clients will connect to the server. What I want to do, is make sure that the client connecting to the server is actually using my protocol and I can "trust" the data being sent from the client to the server. What I thought about doing is creating a sort of hash on the client's machine that follows a particular algorithm. What I did in a previous version was took their IP address, the client version, and a few other attributes of the client and sent it as a calculated hash to the server, who then took their IP, and the version of the protocol the client claimed to be using, and calculated that number to see if they matched. This works ok until you get clients that connect from within a router environment where their internal IP is different from their external IP. My fix for this was to pass the client's internal IP used to calculate this hash with the authentication protocol. My fear is this approach is not secure enough. Since I'm passing the data used to create the "auth hash". Here's an example of what I'm talking about: Client IP: 192.168.1.10, Version: 2.4.5.2 hash = 2*4*5*1 * (1+9+2) * (1+6+8) * (1) * (1+0) Client Connects to Server client sends: auth hash ip version Server calculates that info, and accepts or denies the hash. Before I go and come up with another algorithm to prove a client can provide data a server (or use this existing algorithm), I was wondering if there are any existing, proven, and secure systems out there for generating a hash that both sides can generate with general knowledge. The server won't know about the client until the very first connection is established. The protocol's intent is to manage a network of clients who will be contributing data to the server periodically. New clients will be added simply by connecting the client to the server and "registering" with the server. So a client connects to the server for the first time, and registers their info (mac address or some other kind of unique computer identifier), then when they connect again, the server will recognize that client as a previous person and associate them with their data in the database.

  Read the article

• What's the extra FTP port here?

  - by warl0ck

  While downloading a tar ball from gnu's FTP server, I found that other than standard 21 TCP port connection, I also seeing an extra connection: tcp 0 0 192.168.1.109:45056 208.118.235.20:21 ESTABLISHED 10956/wget tcp 0 0 192.168.1.109:56724 208.118.235.20:22259 ESTABLISHED 10956/wget What that port is used for? I checked /etc/services, only 20 and 21 should be in use, am I wrong? The command in use was wget 'ftp://ftp.gnu.org/gnu/tar/tar-1.26.tar.xz'

  Read the article

• iptables port redirection on Ubuntu

  - by Xi.

  I have an apache server running on 8100. When open http://localhost:8100 in browser we will see the site running correctly. Now I would like to direct all request on 80 to 8100 so that the site can be accessed without the port number. I am not familiar with iptables so I searched for solutions online. This is one of the methods that I have tried: user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 80 -j ACCEPT user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 8100 -j ACCEPT user@ubuntu:~$ sudo iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8100 It's not working. The site works on 8100 but it's not on 80. If print out the rules using "iptables -t nat -L -n -v", this is what I see: user@ubuntu:~$ sudo iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 redir ports 8100 Chain INPUT (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination The OS is a Ubuntu on a VMware. I thought this should be a simple task but I have been working on it for hours without success. :( What am I missing?

  Read the article

• libssh2 port forward

  - by Evan D

  In extension of this question http://stackoverflow.com/questions/1580750/example-code-of-libssh2-being-used-for-port-forwarding I was wondering if there's an "easier" way to connect to the locally binded addr:port. From the link: you bind a remote port and list it locally, you accept incoming data from the port and send it to another socket (namely the local addr:port), after which I'd like to connect to the local addr:port. Is there a way to skip the "send it to another" step and direct the data directly for my "connect to localhost" ? There are two parts to why I want this, first, it seems excessive, and in the spirit of piping, I wouldn't be surprised if it was possible. Second, since I'm trying to connect to a localhost'ed bound port forward, all code is in the same thread, making a continiously getting data-sending data, and polling the sending data from another socket, a bit tricky. Thanks in advance, Evan

  Read the article

• Is there such a thing as a virtual COM port receipt printer?

  - by Blorgbeard

  I'm debugging some code that writes directly to a COM port in order to print receipts on a receipt printer. The printer model is something like an Epsom TM-88. Instead of printing reams of thermal paper while debugging this code, it would be nice if I could use some kind of virtual printer. Like PDFCreator or FinePrint, but with a virtual COM port instead of a virtual windows printer. Does anyone know of such a thing? Edit: The code sends control characters to get bold text and other formatting. I'd like to see this in the output if possible.

  Read the article

• Using open2300 with Ubuntu

  - by Gawain

  Hello, I am currently running Ubuntu 8.10 and have been trying to use Open2300 to read data from a Lacrosse WS-2310 weather station and report it to the WUnderground server. The program compiles fine but when I try to run it, it does one of two things: usually it pauses for about 4 minutes, then prints "could not reset" to the screen. But sometimes it just hangs forever. It seems like my computer is unable to communicate with the weather station. I have set the serial port as /dev/ttyS0 in the open2300.conf file and i have also tried /dev/ttyS1, /dev/ttyS2, etc with the same result. As far as I can tell, there are no other settings regarding how Open2300 communicates with the device. Is my serial port locked somehow? It could be something as simple as an incorrect configuration for my serial port or something, but I would have no idea how to check that or change the configuration. Any help would be greatly appreciated. thanks, Gawain EDIT: I tried some tests that i found online and everything seems to be working with my serial port... gawain@gawain:~$ ls -l /dev/ttyS* crw-rw---- 1 root dialout 4, 64 2009-07-09 10:01 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 2009-07-09 08:56 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 2009-07-09 08:56 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 2009-07-09 08:56 /dev/ttyS3 gawain@gawain:~$ setserial -a /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test gawain@gawain:~$ setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 8250, Port: 0xd028, IRQ: 18 /dev/ttyS2, UART: 8250, Port: 0xd040, IRQ: 18 /dev/ttyS3, UART: 8250, Port: 0xd050, IRQ: 18 gawain@gawain:~$ echo 12345 > /dev/ttyS0 gawain@gawain:~$ dmesg | tail -3 [ 144.424259] ppdev0: unregistered pardevice [ 145.692199] ppdev0: registered pardevice [ 145.740052] ppdev0: unregistered pardevice I also tried changing the serial port name to /dev/ttys0 (with a lowercase S) and in that case it gave me a different error, "Unable to open serial device." This suggests to me that it is able to open /dev/ttyS0 but something else is preventing it from reading the weather station. Any ideas? thanks.

  Read the article

• How can I write to the parallel port from the Windows Command line?

  - by Manoj

  How can I write to parallel port through Windows XP command line?

  Read the article

• How to Determine the serial port name connected to other machine using c# ?

  - by karthik

  I need to Determine the serial port name connected to other machine using c#.

  Read the article

• How to Determine the serial port name connected to other machine using .NET?

  - by karthik

  I need to Determine the serial port name connected to other machine using c#.

  Read the article

• Port 80 is being used by SYSTEM (PID 4), what is that?

  - by GiH

  I am trying to use port 80 for my application server, but when I perform "netstat -aon" I get TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4 When I look up the process in task manager, it shows PID 4 is SYSTEM, thats it, not extension... nothing, just "SYSTEM". Whats going on here? I'm afraid to end this process, what do I do? UPDATE: I've solved this through a stackoverflow question. Follow this link to find the solution for how to get IIS to stop listening on port 80 for a specified IP address.

  Read the article

• Finding an available network port on the machine

  - by Tomer Vromen

  I'm trying to implement a simple FTP server (a variation of the EFTP protocol) in linux. When a client connects and sends the PASV command, the server should respond with a port number, so the client can connect to that port to transmit the file. How can the server choose a port number? Do I need to iterate through all the ports from 1024 to 65535 until I find a port that the process can bind to? I know that calling bind() with 0 as the port automatically chooses the port to bind to, but then how can I know which port was chosen? Many thanks.

  Read the article

• Rewriting Live TCP/IP (Layer 4) Streams

  - by user213060

  I want to rewrite TCP/IP streams. Ettercap's etterfilter command lets you perform simple live replacements of TCP/IP data based on fixed strings or regexes. Example: if (ip.proto == TCP && tcp.dst == 80) { if (search(DATA.data, "gzip")) { replace("gzip", " "); msg("whited out gzip\n"); } } if (ip.proto == TCP && tcp.dst == 80) { if (search(DATA.data, "deflate")) { replace("deflate", " "); msg("whited out deflate\n"); } } http://ettercap.sourceforge.net/forum/viewtopic.php?t=2833 I would like to rewrite streams based on my own filter program instead of just simple string replacements. Anyone have an idea of how to do this? Is there anything other than Ettercap that can do live replacement like this, maybe as a plugin to a VPN software or something? The rewriting should occur at the transport layer (Layer 4) as it does in this example, instead of a lower layer packet-based approach. Thanks!

  Read the article

• List of all TCP/IP and WinSock Repair commands

  - by Niepojety

  I am building a C# application and I am looking for all a list of TCP/IP and WinSock Repair commands. ipconfig /flushdns netsh int reset all netsh int ipv4 reset netsh int ipv6 reset netsh int ip reset netsh int ip reset c:\ipreset.log netsh int ip reset resetlog.txt netsh int ip reset c:\resetlog.txt netsh int ip reset c:\network-connection.log netsh int 6to4 reset all netsh int httpstunnel reset all netsh int isatap reset all netsh int tcp reset all netsh int teredo reset all netsh int portproxy reset all netsh branchcache reset netsh winhttp reset netsh winsock reset c:\winsock.log netsh winsock reset netsh winsock reset all netsh winsock reset catalog

  Read the article

• How to tune TCP TIME_WAIT timeout on Solaris?

  - by Hongli Lai

  I'm trying to change the TCP TIME_WAIT timeout on Solaris. According to some Google results I need to run this command: ndd -set /dev/tcp tcp_time_wait_interval 60000 However I get: operation failed: Not owner What am I doing wrong? I'm already running ndd as root. Is there another way to tune TIME_WAIT?

  Read the article

• Many TCP connexions localajaxchat <=> 1e100

  - by Olivier Pons

  Hi all! I don't get that: as soon as I open a Webpage, whether it's with Firefox or Chrome (I hate so much IE that I didn't test with it), there are tons of TCP connexions between "localajaxchat" and a supposed google ("1e100") domain. I've already read this topic, but my problem seems strange because there are so many TCP connexions for only one page... I don't get it. If someone could explain this problem to me... Thanks a lot!

  Read the article

• Citrix Plug-in with TCP/IP access

  - by Mat Banik

  I have created for user file named serverDesktop.ica with following content: [ApplicationServers] XenApp= [XenApp] TransportDriver=TCP/IP Address=IP or DOMAIN NAME of the Server ProxyType=auto WinStationDriver=ICA 3.0 Username= Domain= Password= InitialProgram= WorkDirectory= ClientAudio=On ScreenPercent=100 DesiredHRES=1024 DesiredVRES=768 DesiredColor=8 [WFClient] Version=2 The above just gives the user remote desktop to the server. The question is how do I bring up all the Apps in farm via TCP/IP. The Citrix online plugin does not allow the same access as Program Neighborhood did to farms. Please help.

  Read the article

• Why do so many iptables examples specify both "-p tcp" and "-m tcp"?

  - by Alex R

  The manual isn't very clear, and the online articles & tutorials don't bother to explain it. What's the significance of -m tcp and -p tcp used together? It seems so redundant, it bothers me... Thanks

  Read the article

• Cisco ASA - Enable communication between same security level

  - by Conor

  I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

  Read the article

• Delphi simple TCP server hangs. The form freezes but the server continues managing the clients.

  - by NeoNMD

  I'm using a form with an IdTCPServer on it managing strings from the client with a AThread.connection.readln/writeln system. The string handling works and that isn't the problem. The thing is, the form with the server on it hangs and will not load, but it still managed all the clients connected to it so it IS running but it just doesn't work as a form. I'll make a guess that its sitting on a readline or something... but I have NO idea how i can fix this at this moment in time. Please help. procedure TMonitorFrm.ServerExecute(AThread: TIdPeerThread); procedure post(PostMessage:string); begin try AThread.Connection.WriteLn(PostMessage); except showmessage('Cannot post'); end; end; var ActClient : PClient; sTemp, CommBlock, NewCommBlock, ReceiverName, sContent, sSQL, sCommand : String; iCount2, iCount : Integer; sldb : TSQLiteDatabase; sltb : TSQLiteTable; begin if not AThread.Terminated and AThread.Connection.Connected then begin CommBlock := AThread.Connection.ReadLn(); ActClient := PClient(AThread.Data); ActClient.LastAction := Now; sCommand := copy(CommBlock,0,pos(',',CommBlock)-1); {seperate command} sContent := copy(CommBlock,pos(',',CommBlock)+1,length(CommBlock)-(pos(',',CommBlock)+1)); {seperate data block} iCount:= 0 ; if sCommand = 'Announce' then //SPECIAL begin { Do stuff for this command...} end else if sCommand = 'CheckSect' then {Etcetera...} procedure TMonitorFrm.FormCreate(Sender: TObject); var sCompetitionID : string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; begin Clients := TThreadList.Create; Server.Active := True; AreaPnlList := TComponentList.Create; SectionPnlList := TComponentList.Create; Repeat until InputQuery('Competition Select', 'Please type the ID of the competition', sCompetitionID); iCompetitionID:=StrToInt(sCompetitionID); OpenDatabase(slDb); sltb:=slDb.GetTable('SELECT * FROM SectionTable WHERE CompetitionID='+sCompetitionID); Frame31.CreateSections(sltb,Frame31); sltb.Free; CloseDatabase(slDb); { This section needs to check the SQLite databases for sections and list them in the display window and makes a drag n drop profile... } end;

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >