Search Results

Search found 4858 results on 195 pages for 'terminal'.

Page 39/195 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • Grant a user access to directories shared by root (mod: 770)

    - by Paul Dinham
    I want to grant a user (username: paul) access to all directories shared by root with mod 770. I do it this way: groups root (here comes a list of groups in which root user is) usermod -a -G group1 paul usermod -a -G group2 paul usermod -a -G group3 paul ... All the 'group1', 'group2', 'group3' are seen in the group list of root user. However, after adding 'paul' to all groups above, he still can not write to directories shared by root user with mod 770. Did I do it wrongly?

    Read the article

  • Server Bash Line Wrapping Over Text & In Wrong Place

    - by Pez Cuckow
    This is quite a hard problem to explain, when connecting to one of my servers using the bash shell, under any user the line wrapping is broken and has all sorts of problems. Once of which I detail in screenshots below: Other problems I experience include nano getting very confused about which line and or letter I am on, as shown by typing the same message into nano: These problems only occur when connecting as I previously mentioned to one of my servers which runs CentOs. Do you know why this is occurring and what I can do to fix it? On other servers the message works fine! Thanks for your time, Output of requested commands: Server that doesn't work properly: Working server: Could it perhaps be the custom prompt on the non working server? In .bashrc PS1='\e[1;32m\u@\h\e[m:\e[1;34m\w\e[m$ ' Commenting this out appeared to resolve the problem. Google says line wrapping errors can occur if you don't conform to these rules use the \[ escape to begin a sequence of non-printing characters, and the \] escape to signal the end of such a sequence I am not sure where this would fit in on my prompt?

    Read the article

  • Logging in as the same user multiple times in Remote Desktop Windows Server 2008

    - by Little_Johnn
    Quick question: I have a situation where I need to let multiple people on different PCs log into one server 2008 machine as administrator simultaneously over remote desktop. I have the CALs for it, it's just not set up correctly. When one user tries to log in, it boots the other out. What I need is to present to them a different session, just each as logged in as admin. Sorry for the slightly rambling post, I'm new here. Thanks!

    Read the article

  • Copying files with SSH

    - by Deniz Zoeteman
    I am trying to copy a file from my other computer, to another computer. (both running Ubuntu 9.10) So say: I've ssh'ed into the other computer; i 'cd' to the directory; and i entered cp File.zip /home/me/Desktop as file.zip is located in the directory i just used cd with. Now, it gives me the following error message: cannot create regular file '/home/me/Desktop': no such file or directory What do i have to do?

    Read the article

  • rfkill unblock all does not activate a certain wireless card

    - by Davidos
    With an intel 1000 wireless card; rfkill list 0: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: tpacpi_bluetooth_sw: Bluetooth Soft blocked: yes Hard blocked: no rfkill unblock all 0: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no Why does my wireless card not turn on?

    Read the article

  • Installing TKInter for Python 2.6.5

    - by Azfar
    Well today's been a bit of shock. After running port -v selfupdate followed by an attempt to run sudo port install py26-ipython MacPorts went around installing a whole host of stuff, including updating my Python from 2.6.4 to 2.6.5. It's nice but unexpected in a creepy way. So I tried to install TKInter using MacPorts with port search tkinter yielding: py-tkinter @2.4.6 (python, graphics) Python bindings to the Tk widget set py25-tkinter @2.5.4 (python, graphics) This is a stub. tkinter is now built with python25 Found 2 ports. So I tried sudo port install py25-tkinter and then it tries to install Python 2.5.5. There must be an easier way to install TkInter without being faffed around... help please?

    Read the article

  • None of my bash commands work

    - by Kevin
    I have an Ubuntu 9.10 netbook. I has always run great. Two days ago, I was running as root for a while (~30), and when I moved back to my user account (only other account one this machine), all the commands in ~/bin stopped working. If I try ls, it comes up with "cannot execute binary file". Same with ln, mv, mkdir, clear, cp, etc. They all run as root(which makes sense, different files), but I have no idea why this happened. I don't want to stay as root to move around easily. Any idea?

    Read the article

  • None of my bash commands work

    - by Kevin
    I have an Ubuntu 9.10 netbook. I has always run great. Two days ago, I was running as root for a while (~30), and when I moved back to my user account (only other account one this machine), all the commands in ~/bin stopped working. If I try ls, it comes up with "cannot execute binary file". Same with ln, mv, mkdir, clear, cp, etc. They all run as root(which makes sense, different files), but I have no idea why this happened. I don't want to stay as root to move around easily. Any idea?

    Read the article

  • ajaxterm: cannot type some characters (j, b, u for sure)

    - by jae
    I googled and came up empty. Anyone have experience with ajaxterm? Given my login name is "jae", just as on this site, this inability to enter "j" kills ajaxterm for my purposes. It looked so good. Damn. EDIT: Dammit, it was just Firemacs with its idiotic keybindings. Removed all the ones which are really "emacsy", and all's fine now. And the disappearing window was due to me changing the rows/columns, which requires a restart (of a daemon that doesn't show up in pstree, weird).

    Read the article

  • Logging in as the same user multiple times in Remote Desktop Windows Server 2008

    - by Little_Johnn
    Quick question: I have a situation where I need to let multiple people on different PCs log into one server 2008 machine as administrator simultaneously over remote desktop. I have the CALs for it, it's just not set up correctly. When one user tries to log in, it boots the other out. What I need is to present to them a different session, just each as logged in as admin. Sorry for the slightly rambling post, I'm new here. Thanks!

    Read the article

  • Com port redirection from Windows 7 to Windows Server 2008 R2

    - by Ola Eldøy
    We use "Copy file.prn to \tsclient\com1" to print from a TS session to a locally attached serial printer. This works fine from Windows XP, but when trying it from a Windows 7 client computer, we get an "Access is denied" error message. And yes, the check box of COM port is selected on the Local Resources tab of the Remote Desktop Connection client. Any pointers? Has anyone even managed to do this successfully?

    Read the article

  • How do I compile DarWINE in PowerPC Mac OS X 10.4.11...?

    - by Craig W. Davis
    So far I've tried using MacPorts which gives me this error: /Error: Cannot install wine for the arch(s) 'powerpc' because Error: its dependency pkgconfig is only installed for the archs 'i386 ppc'. Error: Unable to execute port: architecture mismatch To report a bug, etc... (I'm not allowed to post two links due to being a new poster...)./ I've also tried using the build script I found in the DarWINE 0.9.12 SDK download that I found on the DarWINE SourceForge.net Project Page... I've also tried the build script that I found at http://code.google.com/p/osxwinebuilder/#Building_Wine_via_the_script... None of these attempts to build DarWINE have actually worked. Whenever I build using the DarWINE build script I run it as follows: /1. I decompress the WINE tarball into ~/Downloads/WINE 2. I cd into ~/Downloads/DarWINE. 3. I run ./winemaker ~/Downloads/WINE/wine-1.2.2 or ./winemaker ~/Downloads/WINE/wine-1.2-rc2 (the reason for trying WINE 1.2-rc2 is that some people managed to get it to build on PowerPC Macs running 10.5.8...)./ I made sure to install Xcode Tools 2.5 & all the SDKs too... The net result is either a syntax type error resulting from trying to run the checked out Google Code DarWINE build script or a bunch of make errors when trying to run the official DarWINE build script that I forcefully extracted from the DarWINE 0.9.12 SDK .dmg file by using Pacifist. I trying to build DarWINE on mid-April 2006 1.42 GHz eMac with DL SuperDrive with Bluetooth 2.0+EDR with 2 GBs of RAM running 10.4.11 as I mentioned earlier... (it came with 10.4.4 on the Mac's Restore DVD-ROM that I ordered from 1-800-SOS-APPL & coconutIdentityCard told me it was made on April 12th 2006 & I know that's right because when I reinstalled Mac OS X 10.4.4 it displayed that it was registered/previously owned by a Hawaiian school...): /make[1]: winegcc: Command not found make[1]: * [main.o] Error 127 make: * [dlls/acledit] Error 2./

    Read the article

  • nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

    - by user167328
    I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

    Read the article

  • Domain and TS migration

    - by Windex
    The migration steps outlined by Microsoft in the ts migration seem to deal with moving TS to a different server on the same domain and call for adding the licensing service to another system, move the licenses and then put TS on whatever server you want. However with migrating the domain as well I don't have any place to move the TS server to. So my thought was to simply re-activate my licenses on the new server using the same method as a new TS setup. My question is essentially will this work the way I think it will or will the MS activation clearing house deny the new server? Is there a procedure to follow that "deactivates" the licenses on a server so that the clearing house knows there are some free? (FWIW I can look up the license information through the eopen website and have access to the original license doc.)

    Read the article

  • Bash or Zsh - which one and why?

    - by Andrew
    So, the question pretty much says it all. I'm on Snow Leopard, and I do a lot of web development, particularly in Rails 3 which makes heavy use of the console. I've seen some notable bloggers etc. mention Zsh as their preference over Bash, but I don't know what difference it would make. Could anyone give me a good comparison of what difference there is and what might make one prefer one option or the other? Thanks!

    Read the article

  • On Linux, why does directory tab completion add a \ to a path starting with ~

    - by crobar
    On my work scientific linux 6.2 machine, I often start typing in a directory like below and use tab completion to finish it: ~/mydir But when I hit tab, it becomes e.g. \~/mydirectory/ With an extra forward slash at the start. Why is this, and can I prevent it? It's a pain because using cd etc. doesn't work with the extra slash, I have to start from the actual home directory which is something like /home/username/ On these PCs.

    Read the article

  • Two people using the same computer at the same time remotely!

    - by Mani
    We have two computer in office and two people. My computer is much more faster than another computer. Is it possible my colleague connect to my computer remotely and work by my computer? Using "Remote Desktop" in Windows only one user can log into computer. So when he connect remotely, my user logged off. Is there a tool which can help in this case? I already knew VNC (RealVNC) But it's not helping because when a user connect to my computer, he see exactly my desktop, not his own user desktop.

    Read the article

  • I run a command twice - I'm wondering if it'll be a problem

    - by Delirium tremens
    "In computing, tee is a command in various command-line interpreters (shells) such as Unix shells, 4DOS/4NT and Windows PowerShell, which displays or pipes the output of a command and copies it into a file or a variable. It is primarily used in conjunction with pipes and filters." I run echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash twice. I opened the conf.d folder in Nautilus, but there isn't a splash file nor directory. I expected a file to be there with FRAMEBUFFER=y inside but there isn't. Is this going to be a problem?

    Read the article

  • concatenate files including path in header - path contains spaces

    - by manolo
    I have to concatenate a number of files in a directory structure which contains spaces in the folder names looking like this: ./CH 0000100014/A10/11XT/11xt#001.csv find . -name "*.csv" -type f -print0 | xargs -0 cat > allmycsv.txt does the job, however now I need to include the information contained in the path, i.e. CH 0000100014/A10/11XT as a header of each inputfile to cat. find . -name "*.csv" -type f -print0 | xargs -0 -I % sh -c 'echo %; cat %' >allmycsv.txt would do the job, if I had no spaces in the path, but in my case, cat does not get along with the space in the path name. Is there a way out? Cheers, E P.S. I am working on bash on OSX

    Read the article

  • Recovering text files in terminal using grep on Mac OS X Snow Leopard

    - by littlejim84
    I foolishly removed some source code from my Mac OS X Snow Leopard machine with rm -rf when doing something with buildout. I want to try and recover these files again. I haven't touched the system since to try and seek an answer. I found this article and it seems like the grep method is the way to go, but when running it on my machine I'm getting 'Resource busy' when trying to run it on the disk. I'm using this command: sudo grep -a -B1000 -A1000 'video_output' /dev/disk0s2 > file.txt Where 'dev/disk0s2' is what came up when I ran df. I get this when running: grep: /dev/disk0s2: Resource busy I'm not an expert with this stuff, I'm trying my best. Please can anyone help me further? I'm on the verge of losing two days of source code work! Thank you

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >