Search Results

Search found 18433 results on 738 pages for 'tfs power tools'.

Page 39/738 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• New power supply and now HDDs are not recognized.

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Are speakers wasting power when they are not in use?

  - by Dennis Cheung

  I guess all of you have a pair/set of speakers for your MP3s. I am just interesting to how do they do when they are not playing? How actually the power spent by the speaker? Does any the below cases matter? Idle / Silence input When you computer is off / not connected Raise the volume by hardware (turn/push the button on the speaker) Raise the volume by software (do it with your mouse) BTW, to save the world. I am here to suggest you to unplug it when you leave your PC.

  Read the article

• Why would a machine ruin three "power supply"s?

  - by Moshe

  A client of mine has an XP era eMachines. The power supply has died and been replaced 3 times. I've discharged the motherboard and checked the surge protector. In the middle of a scan with ComboFix, the machine died. It powers on and hangs before the BIOS and shows a solid yellow light. I believe the model # is T5062 or something like that. Aside from a bad outlet, what would cause the PSU to die a few times?

  Read the article

• Is there a way to automatically disconnect a notebook from the eletrical power-supply?

  - by Diogo

  I know this looks like weird and useless, but let me explain... I'm running Windows Assessment and Deployment Kit (Windows ADK) to make some tests on Windows 8 Preview. One of it's assessment is the "Battery Run Down Test", which tests battery consumption with some procesor load. I'm trying to "automate" in some way this test, I mean, I wish to execute it without any human intervention (such as manually disconecting the eletric power source to leave my notebook running only from batteries to run this assessment). So, there is some ACPI API, Windows API or even an easy bat shell/VBScript/Powershell command to do this? Does someone already made something like? PS: I'm asking this because I couldn't found any answer, but maybe someone here would have any tip...

  Read the article

• Big noise from Power Supply Unity Fa? Should I replace it immediately?

  - by EApubs

  Recently, I started to get a large noise from my PC when switched on. After some time, it disappears. I discovered that the issue is with the Power Supply Unit. Does this mean I have a failing PSU? Will it harm the PC if I didn't replace it immediately? Several years ago I bought a new computer casing which is very weird. Its small and compact. Normally, we have the PSU in the top. But in here, the PSU is on the bottom and right below the hard drive. Recently, two of my hard drives started to show problems. Read errors and bad sectors. Can it be the PSU and the design of the casing? Here's an image of the PSU and the hard drive :

  Read the article

• How can I automate my Linux computer to power off (and on preferably) under certain circumstances?

  - by Ashimema

  OK, So a little background; I've been using Windows Home Server as a Backup Appliance, Media Server and Share Server at home for some time. I decided it was costing me allot of juice so very early on added the "Lights Out" add-on to ensure it was only running as and when needed. I'm now looking to switch to a Linux based server and I'm looking for a similar tool/set of tools for advanced power management. Now the question; Anyone got any all-in-one suggestions (i.e with client parts for both Windows and Linux and a server part for the Linux server), or can anyone simply verify that I'll need to set-up all the individual bits for this myself separately? (A tool similar to "[SmartPower][2]" but for linux would be a great start)

  Read the article

• New power supply, now computer doesn't recognise hard drive?

  - by Mike

  Ok, I bought a new power supply, because my old one was too damn loud. I hooked it up to my PC, turned it on, everything is looking fine, start up detects my DVD drive, 2 hard disks.. then I get the message "BOOT FAILURE INSERT SYSTEM DISK". Now I've seen some other people talk about going into BIOS and changing the start up to the HDD and not the CD.. well I've done that and it doesn't help. If I let windows load up and it asks me to which partition I wish to install windows, no partition is present. It's as if after the initial start up the drives arn't being found. I plugged my old (but loud) PSU back in, connected up all the cables, and it works perfectly. Why does the new PSU not detect my HDD's after the first BIOS screen start up? Any ideas? :)

  Read the article

• Implementing Release Notes in TFS Team Build 2010

  - by Jakob Ehn

  In TFS Team Build (all versions), each build is associated with changesets and work items. To determine which changesets that should be associated with the current build, Team Build finds the label of the “Last Good Build” an then aggregates all changesets up unitl the label for the current build. Basically this means that if your build is failing, every changeset that is checked in will be accumulated in this list until the build is successful. All well, but there uis a dimension missing here, regarding to releases. Often you can run several release builds until you actually deploy the result of the build to a test or production system. When you do this, wouldn’t it be nice to be able to send the customer a nice release note that contain all work items and changeset since the previously deployed version? At our company, we have developed a Release Repository, which basically is a siple web site with a SQL database as storage. Every time we run a Release Build, the resulting installers, zip-files, sql scripts etc, gets pushed into the release repositor together with the relevant build information. This information contains things such as start time, who triggered the build etc. Also, it contains the associated changesets and work items. When deploying the MSI’s for a new version, we mark the build as Deployed in the release repository. The depoyed status is stored in the release repository database, but it could also have been implemented by setting the Build Quality for that build to Deployed. When generating the release notes, the web site simple runs through each release build back to the previous build that was marked as Deplyed, and aggregates the work items and changesets: Here is a sample screenshot on how this looks for a sample build/application The web site is available both for us and also for the customers and testers, which means that they can easily get the latest version of a particular application and at the same time see what changes are included in this version. There is a lot going on in the Release Build Process that drives this in our TFS 2010 server, but in this post I will show how you can access and read the changeset and work item information in a custom activity. Since Team Build associates changesets and work items for each build, this information is (partially) available inside the build process template. The Associate Changesets and Work Items for non-Shelveset Builds activity (located inside the Try  Compile, Test, and Associate Changesets and Work Items activity) defines and populates a variable called associatedWorkItems   You can see that this variable is an IList containing instances of the Changeset class (from the Microsoft.TeamFoundation.VersionControl.Client namespace). Now, if you want to access this variable later on in the build process template, you need to declare a new variable in the corresponding scope and the assign the value to this variable. In this sample, I declared a variable called assocChangesets in the RunAgent sequence, which basically covers the whol compile, test and drop part of the build process:   Now, you need to assign the value from the AssociatedChangesets to this variable. This is done using the Assign workflow activity:   Now you can add a custom activity any where inside the RunAgent sequence and use this variable. NB: Of course your activity must place somewhere after the variable has been poplated. To finish off, here is code snippet that shows how you can read the changeset and work item information from the variable.   First you add an InArgumet on your activity where you can pass i the variable that we defined. [RequiredArgument] public InArgument<IList<Changeset>> AssociatedChangesets { get; set; } Then you can traverse all the changesets in the list, and for each changeset use the WorkItems property to get the work items that were associated in that changeset: foreach (Changeset ch in associatedChangesets) { // Add change theChangesets.Add( new AssociatedChangeset(ch.ChangesetId, ch.ArtifactUri, ch.Committer, ch.Comment, ch.ChangesetId)); foreach (var wi in ch.WorkItems) { theWorkItems.Add( new AssociatedWorkItem(wi["System.AssignedTo"].ToString(), wi.Id, wi["System.State"].ToString(), wi.Title, wi.Type.Name, wi.Id, wi.Uri)); } } NB: AssociatedChangeset and AssociatedWorkItem are custom classes that we use internally for storing this information that is eventually pushed to the release repository.

  Read the article

• Why you need to tag your build servers in TFS

  - by Martin Hinshelwood

  At SSW we use gated check-in for all of our projects. The benefits are based on the number of developers you have working on your project. Lets say you have 30 developers and each developer breaks the build once per month. That could mean that you have a broken build every day! Gated check-ins help, but they have a down side that manifests as queued builds and moaning developers. The way to combat this is to have more build servers, but with that comes complexity. Inevitably you will need to install components that you would expect to be installed on target computers, but how do you keep track of which build servers have which bits? What about a geographically diverse team? If you have a centrally controlled infrastructure you might have build servers in multiple regions and you don’t want teams in Sydney copying files from Beijing and vice a versa on a regular basis. So, what is the answer. Its Tags. You can add a set of Tags to your agents and then set which tags to look for in the build definition. Figure: Open up your Build Controller Manager Select “Build | Manage Build Controllers…” to get a list of all of your controllers and he build agents that are associated with them. Figure: the list of build agents and their controllers Each of these Agents might be subtly different. For example only one of these agents has FTP software installed. This software is required for only one of the many builds we have set up. My ethos for build servers is to keep them as clean as possible and not to install anything that is not absolutely necessary. For me that means anything that does not add a *.target file is suspect, and should really be under version control and called via the command line from there. So, some of the things you may install are: Silverlight 4 SDK Visual Studio 2010 Visual Studio 2008 WIX etc You should not install things that will not end up on the target users computer. For a website that means something different to a client than to a server, but I am sure you get the idea. One thing you can do to make things easier is to create a tag for each of the things that you install. that way developers can find the things they need. We may change to using a more generic tagging structure (Like “Web Application” or “WinForms Application”) if this gets too unwieldy, but for now the list of tags is limited. Figure: Tags associated with one of our build agents Once you have your Build Agents all tagged up ALL your builds will start to fail This is because the default setting for a build is to look for an Agent that exactly matches the tags for the build, and we have not added any yet. The quick way to fix this is to change the “Tag Comparison Operator” from “ExactMatch” to “MatchAtLease” to get your build immediately working. Figure: Tag Comparison Operator changes to MatchAtLeast to get builds to run. The next thing to do is look for specific tags. You just select from the list of available tags and the controller will make sure you get to a build agent that uses them. Figure: I want Silverlight, VS2010 and WIX, but do not care about Location. And there you go, you can now have build agents for different purposes and regions within the same environment. You can also use name filtering, so if you have a good Agent naming convention you can filter by that for regions. For example, your Agents might be “SYDVMAPTFSBP01” and “SYDVMAPTFSBP02” so a name filter of “SYD*” would target all of the Sydney build agents. Figure: Agent names can be used for filtering as well This flexibility will allow you to build better software by reducing the likelihood of not having a certain dependency on the target machines. Figure: Setting the name filter based on server location  Used in combination there is a lot of power here to coordinate tens of build servers for multiple projects across multiple regions so your developers get the most out of your environment. Technorati Tags: ALM,TFBS,TFS 2010,TFS Admin

  Read the article

• Process Power to the People that Create Engagement

  - by Michael Snow

  Organizations often speak about their engagement problems as if the problem is the people they are trying to engage - employees,  partners, customers and citizens.  The reality of most engagement problems is that the processes put in place to engage are impersonal, inflexible, unintuitive, and often completely ignorant of the population they are trying to serve. Life, Liberty and the Pursuit of Delight? How appropriate during this short week of the US Independence Day Holiday that we're focusing on People, Process and Engagement. As we celebrate this holiday in the US and the historic independence we gained (sorry Brits!) - it's interesting to think back to 1776 to the creation of that pivotal document, the Declaration of Independence. What tremendous pressure to create an engaging document and founding experience they must have felt. "On June 11, 1776, in anticipation of the impending vote for independence from Great Britain, the Continental Congress appointed five men — Thomas Jefferson, John Adams, Benjamin Franklin, Roger Sherman, and Robert Livingston — to write a declaration that would make clear to people everywhere why this break from Great Britain was both necessary and inevitable. The committee then appointed Jefferson to draft a statement. Jefferson produced a "fair copy" of his draft declaration, which became the basic text of his "original Rough draught." The text was first submitted to Adams, then Franklin, and finally to the other two members of the committee. Before the committee submitted the declaration to Congress on June 28, they made forty-seven emendations to the document. During the ensuing congressional debates of July 1-4, 1776, Congress adopted thirty-nine further revisions to the committee draft. (http://www.constitution.org) If anything was an attempt for engaging the hearts and minds of the 13 Colonies at the time, this document certainly succeeded in its mission. ...Their tools at the time were pen and ink and parchment. Although the final document would later be typeset with lead type for a printing press to distribute to the colonies, all of the original drafts were hand written. And today's enterprise complains about using "Review and Track Changes" at times.  Can you imagine the manual revision control process? or lack thereof?  Collaborative process? Time delays? Would  implementing a better process have helped our founding fathers collaborate better? Declaration of Independence rough draft below. One of many during the creation process. Great comparison across multiple versions of the document here. (from http://www.ushistory.org/): While you may not be creating a new independent nation, getting your employees to engage is crucial to your success as a company in today's world. Oracle WebCenter provides the tools that power engagement. Employees that have better tools for communication, collaboration and getting their job done are more engaged employees. Better engaged employees create more engaged customers and partners. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• Bladecenter-E Power Module fault

  - by Lihnjo

  We have problem on IBM Bladecenter-E Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy What is the best solution for this problem? Thanks AMM Service Data Help SPAPP Capture Available 10/13/2010 17:03:47 1090347 bytes Time: 11/19/2012 11:02:31 UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 MAC Address xx:xx:xx:xx:xx:xx MM Information Name: nnnnn Contact: aaa, bbb, ccc, England Location: [email protected] IP address: 111.222.333.444 Date Time Information GMT offset: +1:00 - Central Europe Time (Western Europe, Algeria, Nigeria, Angola) Adjust for DST: Yes NTP: Enabled NTP Hostname/IP: 111.222.333.444 System Health: Critical System Status Summary One or more monitored parameters are abnormal. Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy CHASSIS (BladeCenter-E) in CHASSIS slot: 01 TopoPath is "CHASSIS[1]". Description : BladeCenter-E Width : 1 Sub Type : BladeCenter (BC) Power Mode : 220 v KVM Owner : CHASSIS[1]/BLADE[9] MT Owner : CHASSIS[1]/MGMT_MOD[1] Component Type : CHASSIS Inventory: VPD ID: 336 (decimal) POS ID EXT: 0 (decimal) POS ID: 8 (decimal) Machine Type/Model: 86773RG Machine Serial Number: 99ZL816 Part Number: 39R8561 FRU Number: 39R8563 FRU Serial Number: YK109174W1HV Manufacturer ID: IBM Hardware Revision: 3 (decimal) Manufacture Date: 18 (wk), 07 (yr) UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 (hex) Type Code: 97 (decimal) Sub-type Code: 0 (decimal) IANA Num: 336 (decimal) Product ID: 8 (decimal) Manufacturer Sub ID: FOXC Enviroment data: -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0xa Sensor Label: : Midplane Sensor ID: : 0x0 MGMT MOD (Advanced Management Module) in MGMT_MOD slot: 01 TopoPath is "CHASSIS[1]/MGMT_MOD[1]". Description : Advanced Management Module Name : kant Width : 1 Component Role : Primary Component Type : MGMT MOD Insert Time : 28050132 Inventory: VPD ID: 288 (decimal) POS ID EXT: 0 (decimal) POS ID: 4 (decimal) Part Number: 39Y9659 FRU Number: 39Y9661 FRU Serial Number: YK11836CE2RC Manufacturer ID: IBM Hardware Revision: 4 (decimal) Manufacture Date: 50 (wk), 06 (yr) UUID: 1D95 9937 8CA5 11DB 9499 0014 5EDF 1C98 (hex) Type Code: 81 (decimal) Sub-type Code: 1 (decimal) IANA Num: 20301 (decimal) Product ID: 65 (decimal) Manufacturer Sub ID: ASUS Firmware data: Type : AMM firmware Build ID : BPET50P File Name : CNETCMUS.PKT Release Date : 03/26/2010 Release Level : 50 Revision - Major: 80 Port info: ======================================================== Topology Path ID : 1 Label : External Phy Orientation : EXTERNAL Port Number : 1 Type : MGT Physical Meidum : Copper Number of Link Intferfaces : 1 ------------------------------------ Link Ifc ID Number : 1 Link Ifc Transport Protocol : ENET Link Ifc Addr Type : MAC Link Ifc Burned-in Addr : xx:xx:xx:xx:xx:xx Link Ifc Admin Addr : 00:00:00:00:00:00 Link Ifc Addr in use : xx:xx:xx:xx:xx:xx ---------------------------------------------------------- Configuration behaviors: Save Only Enviroment data: -------------- Type: : TEMPERATURE Unit: : DEGREES_C Reading: : 38.00 Sensor Label: : MM Ambient Sensor ID: : 0x0 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +4.81 Sensor Label: : +5V Sensor ID: : 0x1b -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +3.26 Sensor Label: : +3.3V Sensor ID: : 0x19 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +11.97 Sensor Label: : +12V Sensor ID: : 0x16 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : -4.88 Sensor Label: : -5V Sensor ID: : 0x1e -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +2.47 Sensor Label: : +2.5V Sensor ID: : 0x18 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +1.76 Sensor Label: : +1.8V Sensor ID: : 0x15 -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0x19 Sensor Label: : kant Sensor ID: : 0x0

  Read the article

• New release of the Windows Azure SDK and Tools (March CTP)

  - by kaleidoscope

  From now on, you only have to download the Windows Azure Tools for Microsoft Visual Studio and the SDK will be installed as part of that package. What’s new in Windows Azure SDK Support for developing Managed Full Trust applications. It also provides support for Native Code via PInvokes and spawning native processes. Support for developing FastCGI applications, including support for rewrite rules via URL Rewrite Module. Improved support for the integration of development storage with Visual Studio, including enhanced performance and support for SQL Server (only local instance). What’s new in Windows Azure Tools for Visual Studio Combined installer includes the Windows Azure SDK Addressed top customer bugs. Native Code Debugging. Update Notification of future releases. FastCGI template http://blogs.msdn.com/jnak/archive/2009/03/18/now-available-march-ctp-of-the-windows-azure-tools-and-sdk.aspx   Ritesh, D

  Read the article

• VMWare-Tools Installation fails

  - by Ajay

  I am trying to install VMwareTools-8.4.6-385536.tar.gz (VMWare Tools) on the following operating system: Ubuntu 11.04 Linux ubuntu 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux I am using VMPlayer version 3.1.4 - build 385536 After starting the installation I am getting the following errors: What is the directory that contains the init scripts? [/etc/init.d] Error opening No such file or directory Distribution provided drivers for Xorg X server are used. Skipping X configuration because X drivers are not included. Creating a new initrd boot image for the kernel.<br> update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Blocking file system: done Guest operating system daemon: failed Virtual Printing daemon: done Unable to start services for VMware Tools Can somebody help in this?

  Read the article

• Problems detecting android tablet IView 788TPC with mtp-tools

  - by Elder Geek

  I installed mtp-tools on 14.04 "Trusty" through Software Center. No problems with install. Issuing `mtp-detect' results in 'Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) No raw devices found.' I did some research and found that mtpfs might be required. so installed that with :~$ sudo apt-get install mtpfs I still get the following result :~$ mtp-detect Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6 Listing raw device(s) No raw devices found. My research indicates that the mtp-tools package is still under development. source: http://libmtp.sourceforge.net/ and the documentation is not comprehensive. source man mtp-tools as well as mtp-detect -h I tried adding the PPA from Are there any plans to improve mtp support on future Ubuntu releases? but it seems this is already worked into trusty 14.04 and won't resolve the problem. Can anyone provide a recommended course of action to resolve this problem?

  Read the article

• Links for PrDC10 Session Visual Studio 2010 Testing Tools

  - by Aaron Kowall

  Here are the links I promised to post from my session on Visual Studio 2010 Testing Tools. To download and configure the TFS 2010 Virtual Machine the best instructions are here: http://blogs.msdn.com/b/briankel/archive/2010/03/18/now-available-visual-studio-2010-release-candidate-virtual-machines-with-sample-data-and-hands-on-labs.aspx To download and configure the Lab Management Virtual Machine, the best instructions are here: http://blogs.msdn.com/b/lab_management/archive/2010/02/12/one-box-lab-management-walkthrough.aspx Thanks to all that attended my presentation!  Hope you learned a bit. Technorati Tags: PrDC10,TFS 2010,VHD,Lab Management

  Read the article

• What You Said: Your Favorite Remote Desktop Access Tools and Tips

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your favorite remote desktop access tools and tips; now we’re back to highlight your favorite tools and how you use them. The two prevailing themes among all the tools suggested were pricing and ease of deployment. On that front, LogMeIn had a strong following. Mtech writes: I use Logmein and am amazed the free version can be used even for business purposes. I also felt so bad and wanted to pay for the Pro version just out of gratitude but they called me personally from the USA and said why pay when the free version does all you need! What a company. HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• Tools to diagnose Ubuntu problems

  - by Luis Alvarado

  Over time a user will have several problems with Ubuntu as any other OS in the world. What tools and terminal commands exist in Ubuntu to help diagnose how the problem occurred and help solve it if it can be done. Problems like: Ubuntu Freezes after X time or when using Y app Ubuntu rebooted/hibernated/suspended all by itself Ubuntu not showing video or video has problems Ubuntu not making any sound or sound has problems Ubuntu not reading X drive (Pen drive, Internal Drive, External Drive...) Ubuntu slow Ubuntu not working with X hardware when connected Ubuntu network problem Normally there is a couple of GUI tools or Terminal commands that Ubuntu experts typically mention first to use to do a first diagnosis of this. What GUI tools (in case the problem is not related to video or limits the user from using the GUI) and Terminal commands (In case GUI is not working) can a user use to diagnose and help himself to how to find/fix the problem.

  Read the article

• TFS Proxy server configuration

  - by Raj Kumar

  Hi We have TFS Server on different domain and we are trying to configure TFS Proxy on different domain which connects through internet. Now can anyone please let us know that which user account has to be provided while configuring TFS proxy. If this needs to be the TFS Server than we can't because its on another domain. regards Raj Kumar

  Read the article

• Is One Tool or a Suite of Tools Better for Scrum?

  - by Rob Wells

  G'day, Edit: We've been using Scrum very successfully for several years on several projects of varying sizes. In fact, our team developed the successful iPlayer project for the BBC using a classical Scrum approach. After using various combinations of tools, some high-tech, some low-tech, across these projects we now wish to try adopting a suitable tool suite. Our manager is to some extent attempting to force the adoption of a single suite of tools for Scrum. I've looked at the SO question "Best Scrum tools" and most people seem to recommend either: a suite of low-tech solutions, e.g. whiteboards, post-its, index cards, etc., or a monolithic tool that tries to satisfy as much as possible of the process, e.g. Agilo, Mingle, ScrumWorks, Target Process, etc. Our team is currently evaluating several different Scrum tools. However, we are looking at selecting a single, monolithic tool, e.g. Agilo. All of the "one-stop" solutions have their strengths and weaknesses with the serious enterprise type solutions being the best sort of fit. But all have some short comings. After reading the paper "Peer Code Review: An Agile Process" over at SmartBear I started wondering if we were trying to force adoption of a tool on a "best fit" basis. I think you can take a couple of reference artefacts of the Scrum development process, say user stories, epics and themes, and the code base which must use a well-known SCM, e.g. SVN, Hg, etc. Then if we take that as the common reference points for the tools employed then we would be able to use a group of tools to handle the different aspects of the Scrum process rather than try forcing a fit of a single tool would is a bit like forcing a square peg into the round hole. In this way, providing you've agreed your common reference points, you can use several tools, each performing their role better than a could be done by a single component in a monolithic tool suite. Is this a more sensible approach? Are the two reference points I mentioned above suitable, or is their a better choice of points where the tools would meet? cheers,

  Read the article

• New TFS 2010 Features

  - by Vaccano

  Does anyone know where I can go to get a list of the new TFS 2010 features. NOTE: I need TFS 2010 features. Not Visual Studio 2010. My boss is wondering why not just upgrade to Visual Studio 2010 and not worry about updating TFS from 2008 to 2010. (VS2010 is compatable with TFS 2008.) Any input would be nice.

  Read the article

• Where can I download VMWare Tools for 1.x?

  - by matnagel

  Plsease can you show me where I can download the latest Version of VMWare Tools for the following Client: Server is Windows 2003 32 bit with VMWare Server 1.x Client is Windows 2003 32 bit Please can you point me to a download page. If the name is not "VmWare Tools" please also help me to choose the right file. (Yes, I know 1.x is old. We will upgrade later soon but not now.) Thank you.

  Read the article

• Visual Studio &amp; TFS 11 &ndash; List of extensions and upgrades

  - by terje

  This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010.  The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it.  The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support.  I will add them as they arrive.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010.   Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012     Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes             #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft       Coding Yes Inmeta Build Explorer     Free TFS integration No Build Manager Community Build Manager. Info here from Jakob   Free TFS Integration No Code Contracts Coming real soon   Free Coding & Quality Yes Code Contracts Editor Extensions     Free Coding & Quality Yes Web Std Update     Free Coding (Web) Yes (MSFT) Web Essentials     Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0   Free Coding/Investigation No dotTrace     Licensed Quality No NDepend   Licensed Quality No tangible T4 editor     Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes.     Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes  Was Moles in 2010. Fakes is improved and made into a product.  NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11   Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue.  Oct 2011 SQL Server 2008 R2 SP1

  Read the article

• Power, Cooling and Data Center Design -- From Square One

  Building a data center from scratch doesn't just mean getting the latest in gear. It also brings with it the latest power, cooling and data center design. Here's what one company did.

  Read the article

• Power, Cooling and Data Center Design -- From Square One

  Building a data center from scratch doesn't just mean getting the latest in gear. It also brings with it the latest power, cooling and data center design. Here's what one company did.

  Read the article

• Solar Power Your Data Center Into the Future

  Hard-Core Hardware: The age of solar power is fast arriving, and it may be keeping the lights on in a data center near you. The former downsides, chiefly cost constraints, no longer apply.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >