Search Results

Search found 13889 results on 556 pages for 'results'.

Page 390/556 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• I cannot remove/install software some dependency issue?

  - by Ryuzaki

  I'm having difficulty trying to install/uninstall applications in Ubuntu 12.04 LTS. I have this warning error that appears on my desktop in the form of a red icon with a line through it and it states: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: 'Error: BrokenCount 0' — This usually means that your installed packages have unmet dependencies. I tried to repair automatically through ubuntu software center and I kept getting errors or it just didn't seem to work. Afterwards, I opened terminal and used sudo apt-get check command to see what the problem was and the results yielded: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libjack-jackd2-0 : Breaks: libjack-jackd2-0:i386 (!= 1.9.8~dfsg.1-1ubuntu1) but 1.9.8~dfsg.2-1precise1 is installed libjack-jackd2-0:i386 : Breaks: libjack-jackd2-0 (!= 1.9.8~dfsg.2-1precise1) but 1.9.8~dfsg.1-1ubuntu1 is installed E: Unmet dependencies. Try using -f. After I ran sudo apt-get -f install (in an attempt to fix the issue at hand), I encountered the following errors/code: okudaira@haru-kano:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 24 not upgraded. 1 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 181702 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) The real problem I'm having is interpreting what is being stated. I'm fairly new to the ubuntu experience so I'm not very well-versed with the terminology and the entire in's and out's. Can someone tell me what's wrong with my system? I can no longer install/remove any programs at all.

  Read the article

• Professional immigration

  - by etranger

  Hello all, Does anyone here have a practical advice on professional relocation from Russia to Europe? The reasons behind making such a decision are far beyond the subject, perhaps, so I'll stick to the practical part. Having done some of the "common stuff" for finding a job, I am now facing two serious problems: I am a "dual-class" person, with university degree in marketing, and multiple years of self-studied computer competence (hence my writing here). Have professional experience in both areas. I don't currently hold a European work permit. From what I can see, this results in normal HR person throwing out my CV as either being "overqualified" or "too much trouble with making the permit". I do have the skills and character to start my own business, but it requires start-up capital that I don't have, over the last years I had to pay high bills for medical treatment of my family member, who had deceased. Now, I'm almost out of debts. As you can probably guess, English is not a problem, and I'm open to new languages, but first steps of entering the market, or the society, is the problematic part. I live close to Norway, and am trying to get some professional contacts there, but it hasn't got me any practical perspective so far. Any advice is greatly appreciated. EDIT: I am currently making my living off web site development, and occasional consulting services both in IT and marketing. For purely geographic reasons I'm dealing with clients that reside in the same city where I live, pop. 350 000. Being quite local, market requirements for web sites are simple and stable — clients need to control navigation, write articles in a word-like editor, upload illustrations and place ad banners, all with no additional programming. As many web developers do, I'm using my own content management system that fits these expectations. I have also started developing a newer version of this system that has better support for international environments, but I'm too distant from the real market demand in Europe to speak of the right track here. Technically it's based on php/mysql and uses xslt for templating. It allows for quick website deployment, and has architectural neatness, lack of which made me abandon similar opensource solutions (Joomla and the like). Deploying time from rasterized design proofs is normally under 6-8 working hours, don't know how that compares to the world practice. EDIT 2: Can anyone share what Norwegian (Scandinavian) web solutions market currently demands?

  Read the article

• Support ARMv7 instruction set in Windows Embedded Compact applications

  - by Valter Minute

  On of the most interesting new features of Windows Embedded Compact 7 is support for the ARMv5, ARMv6 and ARMv7 instruction sets instead of the ARMv4 “generic” support provided by the previous releases. This means that code build for Windows Embedded Compact 7 can leverage features (like the FPU unit for ARMv6 and v7) and instructions of the recent ARM cores and improve their performances. Those improvements are noticeable in graphics, floating point calculation and data processing. The ARMv7 instruction set is supported by the latest Cortex-A8, A9 and A15 processor families. Those processor are currently used in tablets, smartphones, in-car navigation systems and provide a great amount of processing power and a low amount of electric power making them very interesting for portable device but also for any kind of device that requires a rich user interface, processing power, connectivity and has to keep its power consumption low. The bad news is that the compiler provided with Visual Studio 2008 does not provide support for ARMv7, building native applications using just the ARMv4 instruction set. Porting a Visual Studio “Smart Device” native C/C++ project to Platform Builder is not easy and you’ll lack many of the features that the VS2008 application development environment provides. You’ll also need access to the BSP and OSDesign configuration for your device to be able to build and debug your application inside Platform Builder and this may prevent independent software vendors from using the new compiler to improve their applications performances. Adeneo Embedded now provides a whitepaper and a Visual Studio plug-in that allows usage of the new ARMv7 enabled compiler to build applications inside Visual Studio 2008. I worked on the whitepaper and the tools, with the help of my colleagues and now the results can be downloaded from Adeneo Embedded’s website: http://www.adeneo-embedded.com/OS-Technologies/Windows-Embedded (Click on the “WEC7 ARMv7 Whitepaper tab to access the download links, free registration required) A very basic benchmark showed a very good performance improvement in integer and floating-point operations. Obviously your mileage may vary and we can’t promise the same amount of improvement on any application, but with a small effort on your side (even smaller if you use the plug-in) you can try on your own application. ARMv7 support is provided using Platform Builder’s compiler and VS2008 application debugger is not able to debut ARMv7 code, so you may need to put in place some workaround like keeping ARMv4 code for debugging etc.

  Read the article

• determine if udp socket can be accessed via external client

  - by JohnMerlino

  I don't have access to company firewall server. but supposedly the port 1720 is open on my one ubuntu server. So I want to test it with netcat: sudo nc -ul 1720 The port is listening on the machine ITSELF: sudo netstat -tulpn | grep nc udp 0 0 0.0.0.0:1720 0.0.0.0:* 29477/nc The port is open and in use on the machine ITSELF: lsof -i -n -P | grep 1720 gateway 980 myuser 8u IPv4 187284576 0t0 UDP *:1720 Checked the firewall on current server: sudo ufw allow 1720/udp Skipping adding existing rule Skipping adding existing rule (v6) sudo ufw status verbose | grep 1720 1720/udp ALLOW IN Anywhere 1720/udp ALLOW IN Anywhere (v6) But I try echoing data to it from another computer (I replaced the x's with the real integers): echo "Some data to send" | nc xx.xxx.xx.xxx 1720 But it didn't write anything. So then I try with telnet from the other computer as well: telnet xx.xxx.xx.xxx 1720 Trying xx.xxx.xx.xxx... telnet: connect to address xx.xxx.xx.xxx: Operation timed out telnet: Unable to connect to remote host Although I don't think telnet works with udp sockets. I ran nmap from another computer within the same local network and this is what I got: sudo nmap -v -A -sU -p 1720 xx.xxx.xx.xx Starting Nmap 5.21 ( http://nmap.org ) at 2013-10-31 15:41 EDT NSE: Loaded 36 scripts for scanning. Initiating Ping Scan at 15:41 Scanning xx.xxx.xx.xx [4 ports] Completed Ping Scan at 15:41, 0.10s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:41 Completed Parallel DNS resolution of 1 host. at 15:41, 0.00s elapsed Initiating UDP Scan at 15:41 Scanning xtremek.com (xx.xxx.xx.xx) [1 port] Completed UDP Scan at 15:41, 0.07s elapsed (1 total ports) Initiating Service scan at 15:41 Initiating OS detection (try #1) against xtremek.com (xx.xxx.xx.xx) Retrying OS detection (try #2) against xtremek.com (xx.xxx.xx.xx) Initiating Traceroute at 15:41 Completed Traceroute at 15:41, 0.01s elapsed NSE: Script scanning xx.xxx.xx.xx. NSE: Script Scanning completed. Nmap scan report for xtremek.com (xx.xxx.xx.xx) Host is up (0.00013s latency). PORT STATE SERVICE VERSION 1720/udp closed unknown Too many fingerprints match this host to give specific OS details Network Distance: 1 hop TRACEROUTE (using port 1720/udp) HOP RTT ADDRESS 1 0.13 ms xtremek.com (xx.xxx.xx.xx) Read data files from: /usr/share/nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 2.04 seconds Raw packets sent: 27 (2128B) | Rcvd: 24 (2248B). The only thing I can think of is a firewall or vpn issue. Is there anything else I can check for before requesting that they look at the firewall server again?

  Read the article

• Move Data into the Grid for Scalable, Predictable Response Times

  - by JuergenKress

  CloudTran is pleased to introduce the availability of the CloudTran Transaction and Persistence Manager for creating scalable, reliable data services on the Oracle Coherence In-Memory Data Grid (IMDG). Use of IMDG architectures has been key to handling today’s web-scale loads because it eliminates database latency by storing important and frequently access data in memory instead of on disk. The CloudTran product lets developers easily use an IMDG for full ACID-compliant transactions without having to be concerned about the location or spread of data. The system has its own implementation of fast, scalable distributed transactions that does NOT depend on XA protocols but still guarantees all ACID properties. Plus, CloudTran asynchronously replicates data going into the IMDG to back-end datastores and back-up data centers, again ensuring ACID properties. CloudTran can be accessed through Java Persistence API (JPA via TopLink Grid) and now, through a new Low-Level API, or LLAPI. This is ideal for use in SOA applications that need data reliability, high availability, performance, and scalability. Still in limited beta release, the LLAPI gives developers the ability to use standard put/remove logic available in Coherence and then wrap logic with simple Spring annotations or XML+AspectJ to start transactions. An important feature of LLAPI is the ability to join transactions. This is a common outcome for SOA applications that need to reduce network traffic by aggregating data into single cache entries and then doing SOA service processing in the node holding the data. This results in the need to orchestrate transaction processing across multiple service calls. CloudTran has the capability to handle these “multi-client” transactions at speed with no loss in ACID properties. Developing software around an IMDG like Oracle Coherence is an important choice for today’s web-scale applications and services. But this introduces new architectural considerations to maintain scalability in light of increased network loads and data movement. Without using CloudTran, developers are faced with an incredibly difficult task to ensure data reliability, availability, performance, and scalability when working with an IMDG. Working with highly distributed data that is entirely volatile while stored in memory presents numerous edge cases where failures can result in data loss. The CloudTran product takes care of all of this, leaving developers with the confidence and peace of mind that all data is processed correctly. For those interested in evaluating the CloudTran product and IMDGs, take a look at this link for more information: http://www.CloudTran.com/downloadAPI.php, or, send your questions to [email protected]. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: Coherence,cloudtran,cache,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Help identify the pattern for reacting on updates

  - by Mike

  There's an entity that gets updated from external sources. Update events are at random intervals. And the entity has to be processed once updated. Multiple updates may be multiplexed. In other words there's a need for the most current state of entity to be processed. There's a point of no-return during processing where the current state (and the state is consistent i.e. no partial update is made) of entity is saved somewhere else and processing goes on independently of any arriving updates. Every consequent set of updates has to trigger processing i.e. system should not forget about updates. And for each entity there should be no more than one running processing (before the point of no-return) i.e. the entity state should not be processed more than once. So what I'm looking for is a pattern to cancel current processing before the point of no return or abandon processing results if an update arrives. The main challenge is to minimize race conditions and maintain integrity. The entity sits mainly in database with some files on disk. And the system is in .NET with web-services and message queues. What comes to my mind is a database queue-like table. An arriving update inserts row in that table and the processing is launched. The processing gathers necessary data before the point of no-return and once it reaches this barrier it looks into the queue table and checks whether there're more recent updates for the entity. If there are new updates the processing simply shuts down and its data is discarded. Otherwise the processing data is persisted and it goes beyond the point of no-return. Though it looks like a solution to me it is not quite elegant and I believe this scenario may be supported by some sort of middleware. If I would use message queues for this then there's a need to access the queue API in the point of no-return to check for the existence of new messages. And this approach also lacks elegance. Is there a name for this pattern and an existing solution?

  Read the article

• Welcome to ubiquitous file sharing (December 08, 2009)

  - by user12612012

  The core of any file server is its file system and ZFS provides the foundation on which we have built our ubiquitous file sharing and single access control model.  ZFS has a rich, Windows and NFSv4 compatible, ACL implementation (ZFS only uses ACLs), it understands both UNIX IDs and Windows SIDs and it is integrated with the identity mapping service; it knows when a UNIX/NIS user and a Windows user are equivalent, and similarly for groups.  We have a single access control architecture, regardless of whether you are accessing the system via NFS or SMB/CIFS.The NFS and SMB protocol services are also integrated with the identity mapping service and shares are not restricted to UNIX permissions or Windows permissions.  All access control is performed by ZFS, the system can always share file systems simultaneously over both protocols and our model is native access to any share from either protocol.Modal architectures have unnecessary restrictions, confusing rules, administrative overhead and weird deployments to try to make them work; they exist as a compromise not because they offer a benefit.  Having some shares that only support UNIX permissions, others that only support ACLs and some that support both in a quirky way really doesn't seem like the sort of thing you'd want in a multi-protocol file server.  Perhaps because the server has been built on a file system that was designed for UNIX permissions, possibly with ACL support bolted on as an add-on afterthought, or because the protocol services are not truly integrated with the operating system, it may not be capable of supporting a single integrated model.With a single, integrated sharing and access control model: If you connect from Windows or another SMB/CIFS client: The system creates a credential containing both your Windows identity and your UNIX/NIS identity.  The credential includes UNIX/NIS IDs and SIDs, and UNIX/NIS groups and Windows groups. If your Windows identity is mapped to an ephemeral ID, files created by you will be owned by your Windows identity (ZFS understands both UNIX IDs and Windows SIDs). If your Windows identity is mapped to a real UNIX/NIS UID, files created by you will be owned by your UNIX/NIS identity. If you access a file that you previously created from UNIX, the system will map your UNIX identity to your Windows identity and recognize that you are the owner.  Identity mapping also supports access checking if you are being assessed for access via the ACL. If you connect via NFS (typically from a UNIX client): The system creates a credential containing your UNIX/NIS identity (including groups). Files you create will be owned by your UNIX/NIS identity. If you access a file that you previously created from Windows and the file is owned by your UID, no mapping is required. Otherwise the system will map your Windows identity to your UNIX/NIS identity and recognize that you are the owner.  Again, mapping is fully supported during ACL processing. The NFS, SMB/CIFS and ZFS services all work cooperatively to ensure that your UNIX identity and your Windows identity are equivalent when you access the system.  This, along with the single ACL-based access control implementation, results in a system that provides that elusive ubiquitous file sharing experience.

  Read the article

• How Do I Do Alpha Transparency Properly In XNA 4.0?

  - by Soshimo

  Okay, I've read several articles, tutorials, and questions regarding this. Most point to the same technique which doesn't solve my problem. I need the ability to create semi-transparent sprites (texture2D's really) and have them overlay another sprite. I can achieve that somewhat with the code samples I've found but I'm not satisfied with the results and I know there is a way to do this. In mobile programming (BREW) we did it old school and actually checked each pixel for transparency before rendering. In this case it seems to render the sprite below it blended with the alpha above it. This may be an artifact of how I'm rendering the texture but, as I said before, all examples point to this one technique. Before I go any further I'll go ahead and paste my example code. public void Draw(SpriteBatch batch, Camera camera, float alpha) { int tileMapWidth = Width; int tileMapHeight = Height; batch.Begin(SpriteSortMode.Texture, BlendState.AlphaBlend, SamplerState.PointWrap, DepthStencilState.Default, RasterizerState.CullNone, null, camera.TransformMatrix); for (int x = 0; x < tileMapWidth; x++) { for (int y = 0; y < tileMapHeight; y++) { int tileIndex = _map[y, x]; if (tileIndex != -1) { Texture2D texture = _tileTextures[tileIndex]; batch.Draw( texture, new Rectangle( (x * Engine.TileWidth), (y * Engine.TileHeight), Engine.TileWidth, Engine.TileHeight), new Color(new Vector4(1f, 1f, 1f, alpha ))); } } } batch.End(); } As you can see, in this code I'm using the overloaded SpriteBatch.Begin method which takes, among other things, a blend state. I'm almost positive that's my problem. I don't want to BLEND the sprites, I want them to be transparent when alpha is 0. In this example I can set alpha to 0 but it still renders both tiles, with the lower z ordered sprite showing through, discolored because of the blending. This is not a desired effect, I want the higher z-ordered sprite to fade out and not effect the color beneath it in such a manner. I might be way off here as I'm fairly new to XNA development so feel free to steer me in the correct direction in the event I'm going down the wrong rabbit hole. TIA

  Read the article

• Duplicate ping response when running Ubuntu as virtual machine (VMWare)

  - by Stonerain

  I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

  Read the article

• Small hiccup with VMware Player after upgrading to Ubuntu 12.04

  The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

  Read the article

• Best Practices for High Volume CPA Import Operations with ebXML in B2B 11g

  - by Shub Lahiri, A-Team

  Background B2B 11g supports ebXML messaging protocol, where multiple CPAs can be imported via command-line utilities.  This note highlights one aspect of the best practices for import of CPA, when large numbers of CPAs in the excess of several hundreds are required to be maintained within the B2B repository. Symptoms The import of CPA usually is a 2-step process, namely creating a soa.zip file using b2bcpaimport utility based on a CPA properties file and then using b2bimport to import the b2b repository.  The commands are provided below: ant -f ant-b2b-util.xml b2bcpaimport -Dpropfile="<Path to cpp_cpa.properties>" -Dstandard=true ant -f ant-b2b-util.xml b2bimport -Dlocalfile=true -Dexportfile="<Path to soa.zip>" -Doverwrite=true Usually the first command completes fairly quickly regardless of the number of CPAs in the repository. However, as the number of trading partners within the repository goes up, the time to complete the second command could go up to ~30 secs per operation. So, this could add up to a significant amount, if there is a need to import hundreds of CPA in a production system within a limited downtime, maintenance window.  Remedy In situations, where there is a large number of entries to be imported, it is best to setup a staging environment and go through the import operation of each individual CPA in an empty repository. Since, this will be done in an empty repository, the time taken for completion should be reasonable.  After all the partner profiles have been imported, a full repository export can be taken to capture the metadata for all the entries in one file.  If this single file with all the partner entries is imported in a loaded repository, the total time taken for import of all the CPAs should see a dramatic reduction. Results Let us take a look at the numbers to see the benefit of this approach. With a pre-loaded repository of ~400 partners, the individual import time for each entry takes ~30 secs. So, if we had to import another 100 partners, the individual entries will take ~50 minutes (100 times ~30 secs). On the other hand, if we prepare the repository export file of the same 100 partners from a staging environment earlier, the import takes about ~5 mins. The total processing time for the loading of metadata, specially in a production environment, can thus be shortened by almost a factor of 10. Summary The following diagram summarizes the entire approach and process. Acknowledgements The material posted here has been compiled with the help from B2B Engineering and Product Management teams.

  Read the article

• Does the method of adjustment matter, or just the final calibration?

  - by Steve

  A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

  Read the article

• Write and fprintf for file I/O

  - by Darryl Gove

  fprintf() does buffered I/O, where as write() does unbuffered I/O. So once the write() completes, the data is in the file, whereas, for fprintf() it may take a while for the file to get updated to reflect the output. This results in a significant performance difference - the write works at disk speed. The following is a program to test this: #include <fcntl.h #include <unistd.h #include <stdio.h #include <stdlib.h #include <errno.h #include <stdio.h #include <sys/time.h #include <sys/types.h #include <sys/stat.h static double s_time; void starttime() { s_time=1.0*gethrtime(); } void endtime(long its) { double e_time=1.0*gethrtime(); printf("Time per iteration %5.2f MB/s\n", (1.0*its)/(e_time-s_time*1.0)*1000); s_time=1.0*gethrtime(); } #define SIZE 10*1024*1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT,S_IWGRP|S_IWOTH|S_IWUSR); for (int i=0; i<SIZE; i++) { write(file,"a",1); } close(file); endtime(SIZE); } void test_fprintf() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); } fclose(file); endtime(SIZE); } void test_flush() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); fflush(file); } fclose(file); endtime(SIZE); } int main() { test_write(); test_fprintf(); test_flush(); } Compiling and running I get 0.2MB/s for write() and 6MB/s for fprintf(). A large difference. There's three tests in this example, the third test uses fprintf() and fflush(). This is equivalent to write() both in performance and in functionality. Which leads to the suggestion that fprintf() (and other buffering I/O functions) are the fastest way of writing to files, and that fflush() should be used to enforce synchronisation of the file contents.

  Read the article

• Getting a virus is *very* annoying

  - by bconlon

  I spent most of yesterday removing an annoying virus from my PC. I feel slightly foolish for getting one in the first place, but after so many years I guess I was always going to eventually succumb. I was also a little surprised at the failure of various tools at removing it. The virus would redirect the browser to websites including ‘licosearch’, ‘hugosearch’ and ‘facebook’, and the disk would be thrashing away infecting dlls in some way. I had the full up to date version of McAfee installed. This identified that there was an issue in some dlls on the system and was able to ‘fix’ them. But they kept getting re-infected. So I installed Microsoft Security Essentials and this too was able to identify and ‘fix’ the infected dlls. The system scans take forever and I really expected better results. I also tried Malwarebytes, Hitman Pro, AVG and Sophos to no avail. Eventually I thought I’d investigate myself. It turned out that on reboot, the virus would start 3 instances of Firefox.exe which I’m guessing would do bad things including infecting as many dlls on the system as possible. I removed Firefox and the virus cleverly then launched 3 instances of Chrome! So I uninstalled Chrome and yes, it then started to launch 3 instances of iexplore.exe. If I’m honest, by this stage I was just seeing if it would be able to use any of the browsers! As it was starting these on reboot, I looked in my User Startup folder and there was a <randomly named>.exe and several log files. I deleted these and rebooted. When I looked they had been recreated. So I then looked in the registry Run and RunOnce entries: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Sure enough there were entries to run a file in C:\Program Files\<random name folder>\<random name file>.exe. I deleted this and rebooted and it was fixed. I also looked in the event log and found a warning that Winlogon had failed to start the file C:\Program Files\<random name folder>\<random name file>.exe So I also checked HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon and this entry had also been changed. Finally I ran a full system scan to clean up any infected dlls. I hope it’s gone for good!  #

  Read the article

• Speaker Notes...

  - by wulfers

  At a .Net User Group meeting this week, I experienced two poorly prepared speakers floundering through presentations….  As a Lead Technologist at the company I work for, I have experience training technical staff and also giving presentations at code camps.  Here are a few guidelines for aspiring speakers you might find helpful…   1.       Do not stand in front of your audience and read your slides.  This is  offensive to your audience and not what they came for...  Your slides are there to reinforce the information you are presenting and to give the audience a little clarification on some terms you may use and as a visual aid for some complicated issues. 2.       Have someone review your presentation (slides, notes, …) who speaks the language you will be presenting in fluently.  Also record at least ten minutes of your presentation and have that same person review that.  One of the speakers this week used the word “Basically” fifty times in less than thirty minutes…  I started to flinch every time he used the term. 3.       Be Prepared  -  before the presentation begins.  Don’t make any last minute changes to your presentation or demo code the night before.  Don’t patch your laptop or demo servers the night before.  If possible create a virtual image that you only use for presentations and use that (refreshed before every presentation). 4.       Know the level of expertise of your audience.  Speaking above or below their abilities will make or break your presentation. 5.       Deliver what you promise. The presentation this week was supposed to be on BDD (Behavior Driven Develpment).  The presenter completely ran off track and 90% of the discussion was how his team mistakenly used TDD (Test Driven Development), and was unhappy with the results.  Based on his loss of focus we only heard a rushed 10 minute presentation on DBB which was a disservice to the audience. 6.       Practice your presentation with your own small team before you try this on a room full of people you don’t know.  A side benefit of doing this with your own team is that you can get candid feedback from your team and also get kudos for training your own team.  I find I can also turn my presentations into technical white papers and get a third benefit from the work I’ve put into a presentation. 7.       Sharpen your own saw.  Pick a topic that is fairly current.  Something you would like to learn about and would benefit your current career path. 8.       Have fun doing it.

  Read the article

• [EF + Oracle] Intro

  - by JTorrecilla

  Prologue I have a busy personal and working time, and at this moment that I start to get more free time, I decided to start a Serie about Entity Framework with Oracle. A few time ago, I got my first experience with EF and Oracle with Oracle 10 g express and Oracle 10 g with the same results, Doesn’t work. Now I download Oracle 11 g to Test again. Tools To start using EF with Oracle we need the following: 1. Visual Studio 2010. No Express Edition 2. Oracle 11g 3 Oracle Driver for EF (ODAC) Intro People, who are starting with EF developments, I recommend to take a look into Unai Zorrilla’s Blog, the post were written in Spanish but they are great! To this Serie, we are going to define the DB from the Oracle administrator. For that we need to follow the next steps: 1. Create a User with a PassWord. In my example the user will be Jtorrecilla 2. Create a TableSpace 3. Define some example tables   (Image1) When we have created the DB, we are going to start a new project in VS 2010. I will start a C# Project. To start with EF, we need to add a new objet to our Project “ADO .NET Entity Data Model". (Image2) The next step will be to indicate that our model will be based on an existing DB, and indicate the connection string (Images 3 and 4): (Imagen3) (Imagen4) Once we selected the connection string, we will need to indicate that in the connection will be saved “Sensitive” data (Image 5), and in the next step we are going to select the DB objets to use in the project(Image 6).   (Image 5) (Image 6) A the end of the selection, we will press Finish button, and it will generate a EDMX file to add to our solution, and in the IDE will appear the DB Schema with the selected Tables and Relations. (Imagen7) One Entity is composed by a set of properties (each matches with a column from the Table in the DB) and Navigation Properties that represents any relation with other Entities.   Finally With this chapter we have installed the environment, defined a DB and configured the solution to start using EF with Oracle. In the next chapter we are going to see What is a Entity and how it works. I hope you enjoy this Serie!

  Read the article

• Perfect is the enemy of “Good Enough”

  - by Daniel Moth

  This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Your Cinnamon Roll & Morning Coffee: Powered by Oracle Enterprise Manager

  - by Ruma Sanyal

  1024x768 Truth be told, as I was getting my morning coffee today, I was pondering the recent election results more than Oracle [there, I said it]. But then an email from Glen Hawkins from the Enterprise Management team hit my Inbox and I started viewing this video. It was about the world’s largest convenience store chain, 7-Eleven, focusing on creating the best Digital Guest Experience (DGE) for their customers. Turns out that Oracle Enterprise Manager (OEM) powers 7-Eleven’s DGE Middleware Platform as a Service solution that consists of Oracle SOA Suite, Exalogic, and Exadata. “We need to present a consistent view of 7-Eleven across all our endpoints: 10,000 stores & various digital entities like our websites and apps”, said Ronald Clanton, the DGE Program Director for 7-Eleven. As 7-Eleven was rolling out a loyalty program with mobile support across multiple geos, it had many complex business & technical requirements, including supporting a wide variety of different apps, 10M guests in NA alone, ability to support high speed transactions, and very aggressive timelines. A key requirement was shortening the cycle for provisioning new environments. Whereas with other vendors this would take a few weeks, Oracle consulting showed them how with OEM provisioning new environments would take half a day, which was quite impressive. 7-Eleven has started to roll out this new program and are delighted to report that some provisioning cycles are as low as 10 minutes which includes provisioning the full Oracle SOA suite, Exalogic and more. They are delighted with OEM’s reporting capabilities and customization thereof. Watch the video to see for yourself. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• Is there a usage count for packages or programs?

  - by math

  Motivation: I want to remove applications I do not use to speed up my package processing tasks like dist upgrades, regular updates, but also for saving disk space and other reasons. I know this is a complex topic so first I will ask my question and second I will give some answers I already found out. Question: How do I find out which package I did not used at all? For example I always use the VLC so I could remove totem package. (Which I could have been used some day, yes.) Of course package dependencies could force me to have programs installed which I will never use. Notes: Find the packages which consume much space via synaptic: Select "Status" in lower left, select "Installed" in upper left, sort column on "size" in upper right. Then you can decide which big packages you really need. Use aptitude autoremove Use ubuntu-tweak's Janitor for removing old kernel packages, old configs, apt-cache entries, etc. Manually search for applications for a given task that you usually solve with your standard app. E.g. Movie player, Music player, Office program, Browser etc. (BTW: this is what I want to be helped with my question) When removing packages I always favour "apt-get purge" over "aptitude remove --purge" as aptitude often will also remove essential packages due to package dependencies. E.g. when removing "evolution" (as I use thunderbird) aptitude wants to remove also "ubuntu-desktop" and 756 other packages as well, while apt-get just removes evolution and its helping pacakges like evolution-common. Ubuntu lense gives me most recent used applications which are candidates for keeping :) Employ deborphan as I read in this related answer: How do I clean up my harddrive? I should certainly keep essential packages: Keep only essential packages This question is pretty much a duplicate of How to see what installed packages I have never used for cleaning purposes but covering only few aspects. However one answer suggests to use a program called unusedpkg but the link seems down. There is also a program called Kleen http://code.google.com/p/kleen/ but it won't compile in 11.10. However I hacked it to compile but the results are unusable, as for example the g++ package was marked as not used for 203, but actually I used it seconds ago for compiling Kleen itself ;) So don't use this tool. On http://wiki.debian.org/DebianPackageInformation I read the the package popularity-contest will produce log files with usage statistics. Unfortunately I didn't enabled the popularity contest so I can't find this log file.

  Read the article

• Problem Solving vs. Solution Finding

  - by ryanabr

  By enlarge, most developers fall into these two camps I will try to explain what I mean by way of example. A manager gives the developer a task that is communicated like this: “Figure out why control A is not loading on this form”. Now, right there it could be argued that the manager should probably have given better direction and said something more like: “Control A is not loading on the Form, fix it”. They might sound like the same thing to most people, but the first statement will have the developer problem solving the reason why it is failing. The second statement should have the developer looking for the solution to make it work, not focus on why it is broken. In the end, they might be the same thing, but I usually see the first approach take way longer than the second approach. The Problem Solver: The problem solver’s approach to fixing something that is broken is likely to take the error or behavior that is being observed and start to research it using a tool like Google, or any other search engine. 7/10 times this will yield results for the most common of issues. The challenge is in the other 30% of issues that will take the problem solver down the rabbit hole and cause them not to surface for days on end while every avenue is explored for the cause of the problem. In the end, they will probably find the cause of the issue and resolve it, but the cost can be days, or weeks of work. The Solution Finder: The solution finder’s approach to a problem will begin the same way the Problem Solver’s approach will. The difference comes in the more difficult cases. Rather than stick to the pure “This has to work so I am going to work with it until it does” approach, the Solution Finder will look for other ways to get the requirements satisfied that may or may not be using the original approach. For example. there are two area of an application of externally equivalent features, meaning that from a user’s perspective, the behavior is the same. So, say that for whatever reason, area A is now not working, but area B is working. The Problem Solver will dig in to see why area A is broken, where the Solution Finder will investigate to see what is the difference between the two areas and solve the problem by potentially working around it. The other notable difference between the two types of developers described is what point they reach before they re-emerge from their task. The problem solver will likely emerge with a triumphant “I have found the problem” where as the Solution Finder will emerge with the more useful “I have the solution”. Conclusion At the end of the day, users are what drives features in software development. With out users there is no need for software. In todays world of software development with so many tools to use, and generally tight schedules I believe that a work around to a problem that takes 8 hours vs. the more pure solution to the problem that takes 40 hours is a more fruitful approach.

  Read the article

• WebCenter Customer Spotlight: Alberta Agriculture and Rural Developmen

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryAlberta Agriculture and Rural Development is a government ministry that works with producers and consumers to create a strong, competitive, and sustainable agriculture and food industry in the province of Alberta, Canada The primary business challenge faced by the Alberta Ministry of Agriculture was that of managing the rapid growth of their information.  They needed to incorporate a system that would work across 22 different divisions within the ministry and deliver an improved and more efficient experience for Desktop, Web and Mobile users, while addressing their regulatory compliance needs as part of the Canadian government. The customer implemented a centralized Enterprise Content Management solution based on Oracle WebCenter Content and developed a strong and repeatable information life cycle management methodology across all their 22 divisions and agencies. With the implemented solution, Alberta Agriculture and Rural Development  centrally manages over 20 million documents for 22 divisions and agencies and they have improved time required to find records,  reliability of information, improved speed and accuracy of reporting and data security. Company OverviewAlberta Agriculture and Rural Development is a government ministry that works with producers and consumers to create a strong, competitive, and sustainable agriculture and food industry in the province of Alberta, Canada.  Business ChallengesThe business users were overwhelmed by growth in documents (over 20 million files across 22 divisions and agencies) and it was difficult to find and manage documents and versions. There was a strong need for a personalized easy-to-use, secure and dependable method of managing and consuming content via desktop, Web, and mobile, while improving efficiency and maintaining regulatory compliance by removing the risk of non-uniform approaches to retention and disposition. Solution DeployedAs a first step Alberta Agriculture and Rural Development developed a business case with clear defined business drivers: Reduce time required to find records Locate “lost” records Capture knowledge lost through attrition Increase the ease of retrieval Reduce personal copies Increase reliability of information Improve speed and accuracy of reporting Improve data security The customer implemented a centralized Enterprise Content Management solution based on Oracle WebCenter Content. They used an incremental implementation approach aligned with their divisional and agency structure which allowed continuous process improvement. This led to a very strong and repeatable information life cycle management methodology across all their 22 divisions and agencies. Business ResultsAlberta Agriculture and Rural Development achieved impressive business results: Centrally managing over 20 million files for 22 divisions and agencies Federated model to manage documents in SharePoint and other applications Doing records management for both paper and electronic records Reduced time required to find records Increased the ease of retrieval Increased reliability of information Improved speed and accuracy of reporting Improved data security Additional Information Oracle Open World 2012 Presentation Oracle WebCenter Content

  Read the article

• eSTEP Newsletter for October 2013 Now Available

  - by Cinzia Mascanzoni

  The October'13 issue of our Newsletter is now available. The issue contains information on the following topics: Oracle Open World Summary Oracle Cloud: Oracle Engineered Systems Oracle Database and Middleware Oracle Applications and Software as a Service Oracle Industries Oracle Partners and the "Internet of Things" JavaOne News MySQL News Corporate News Create Your HR Strategic Vision at Oracle HCM World Oracle Database Protection Redefined A Preview: Oracle Database Backup Logging Recovery Appliance Oracle closed Tekelec acquisition Congratulations to ORACLE TEAM USA! Tech sectionARC M6 Oracle's SPARC M6 Oracle SuperCluster M6-32 - Oracle’s Most Scalable Engineered System Oracle Multitenant on SPARC Servers and Oracle Solaris Oracle Database 12c Enterprise Edition: Plug into the Cloud Oracle In-Memory Database Cache Oracle Virtual Compute Appliance New Benchmark-Results published (Sept. 2013) Video Interview: Elasticity, the Biggest Challenge Facing Data Centers Today Tech blog Announcing New Sun Storage 2500-M2 Drives SPARC Product Line Update ZFS RAID Calculator v6 What ships with ODA X3-2? Tech Article: Oracle Multitenant on SPARC Servers and Oracle Solaris New release of Sun Rack II capacity calculator available Announcing: Oracle Solaris Cluster Product Bulletin, September 2013 Learning & events Planned TechCasts Quarterly Partner Update Live Webcast: Simplify and Accelerate Oracle Database deployment with Oracle VM Templates Join us for OTN's Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence. Learn from OOW 2013 what is going on in Virtualization How to Implementing Early Arriving Facts in ODI, Part I and Part II: Proof of Concept Overview Multi-Factor Authentication in Oracle WebLogic Using multi-factor authentication to protect web applications deployed on Oracle WebLogic. If Virtualization Is Free, It Can't Be Any Good—Right? Looking beyond System/HW SOA and User Interfaces Overcoming the challenges to developing user interfaces in a service oriented References Vodafone Romania Improves Business Agility and Customer Satisfaction, with 10x Faster Business Intelligence Delivery and 12x Faster Processing Emirates Integrated Telecommunications Captures 47% Market Share in a Competitive Market, Thanks to 24/7 Availability Home Credit and Finance Bank Accelerates Getting New Banking Products to Market Extra A Conversation with Java Champion Johan Vos You can find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below. URL: http://launch.oracle.com/ PIN: eSTEP_2011 Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab.

  Read the article

• Software Architecture Analysis Method (SAAM)

  Software Architecture Analysis Method (SAAM) is a methodology used to determine how specific application quality attributes were achieved and how possible changes in the future will affect quality attributes based on hypothetical cases studies. Common quality attributes that can be utilized by this methodology include modifiability, robustness, portability, and extensibility. Quality Attribute: Application Modifiability The Modifiability quality attribute refers to how easy it changing the system in the future will be. This to me is a very open-ended attribute because a business could decide to transform a Point of Sale (POS) system in to a Lead Tracking system overnight. (Yes, this did actually happen to me) In order for SAAM to be properly applied for checking this attribute specific hypothetical case studies need to be created and review for the modifiability attribute due to the fact that various scenarios would return various results based on the amount of changes. In the case of the POS change out a payment gateway or adding an additional payment would have scored very high in comparison to changing the system over to a lead management system. I personally would evaluate this quality attribute based on the S.O.I.L.D Principles of software design. I have found from my experience the use of S.O.I.L.D in software design allows for the adoption of changes within a system. Quality Attribute: Application Robustness The Robustness quality attribute refers to how an application handles the unexpected. The unexpected can be defined but is not limited to anything not anticipated in the originating design of the system. For example: Bad Data, Limited to no network connectivity, invalid permissions, or any unexpected application exceptions. I would personally evaluate this quality attribute based on how the system handled the exceptions. Robustness Considerations Did the system stop or did it handle the unexpected error? Did the system log the unexpected error for future debugging? What message did the user receive about the error? Quality Attribute: Application Portability The Portability quality attribute refers to the ease of porting an application to run in a new operating system or device. For example, It is much easier to alter an ASP.net website to be accessible by a PC, Mac, IPhone, Android Phone, Mini PC, or Table in comparison to desktop application written in VB.net because a lot more work would be involved to get the desktop app to the point where it would be viable to port the application over to the various environments and devices. I would personally evaluate this quality attribute based on each new environment for which the hypothetical case study identifies. I would pay particular attention to the following items. Portability Considerations Hardware Dependencies Operating System Dependencies Data Source Dependencies Network Dependencies and Availabilities  Quality Attribute: Application Extensibility The Extensibility quality attribute refers to the ease of adding new features to an existing application without impacting existing functionality. I would personally evaluate this quality attribute based on each new environment for the following Extensibility  Considerations Hard coded Variables versus Configurable variables Application Documentation (External Documents and Codebase Documentation.) The use of Solid Design Principles

  Read the article

• Documenting sp_ssiscatalog

  - by jamiet

  What is the best way to document an API? Moreover, what is the best way to document a T-SQL API? Before I try to answer those questions I should explain what I mean by “a T-SQL API”. I think of an API as being a collection of well-defined, known, code modules that provide some notion of a service to whomever uses it; in T-SQL terms I tend to think of a collection of stored procedures and functions as a form of API. Its a loose definition, I admit, and in SQL Server circles we don’t tend to think of stored procedures collectively as an API but if you think about it that’s exactly what they are. The question of how to document a T-SQL API came to my mind as I worked on sp_ssiscatalog. How could I make it easy for people to learn about the capabilities of sp_ssiscatalog without forcing them to dig through the code and find out for themselves? My opening gambit was to write documentation pages on the wiki at http://ssisreportingpack.codeplex.com. That’s kinda useful but it does suffer the disadvantage that someone using sp_ssiscatalog needs to go visit a webpage to read it – I want the documentation to be available wherever the user is using sp_ssiscatalog. Moreover, maintaining the wiki is a real PITA. Intellisense works up to a point, I guess: but that only shows whatever SQL Server knows about the various parameters, which isn’t all that much! I wanted a better way for my API users to learn about its capabilities and so I hit upon the idea of simply using PRINT statements within the code itself to inform the user what options are available; hence I added such PRINT statements in the latest check-in. Now when you execute (for example): EXEC sp_ssiscatalog @operation_type='execs' you can hit F6 a few times to view the messages pane and you shall see something like this: Notice that I’m returning information about all the parameters that can be used to affect the results that just got returned. I really do think this will be very useful to anyone using sp_ssiscatalog; I myself am always forgetting what the parameters are and I wrote the damn thing so I can’t really expect anyone else to remember them. I have not yet made available a release that has these changes in it but when I do I’ll blog about it right here. At the time of writing the latest available release of sp_ssiscatalog is DB v1.0.1.0 but if you want to the latest and greatest simply download it straight from source. Feedback is welcome as always. @Jamiet

  Read the article

• Taking a Chomp out of a (Social Network) Product Hype

  - by kellsey.ruppel

  Andrew Kershaw, Senior Director Oracle Social Network Product Development, speaks about Oracle Social Network One of our competitors is being very aggressive with its own developed Social Network add-on, but there should be no doubt in the minds that the Oracle social capabilities available with Fusion CRM stack up well against it. Within the Oracle Cloud, we have announced a product called Oracle Social Network. That technology is pre-integrated into Fusion Applications, enabling your customer to build a collaborative and social enterprise (without all the noise!). Oracle Social Network is designed together with our Fusion Applications. It is very conveniently pre-integrated with CRM, HCM, Financials, Projects, Supply Chain, and the Fusion family. But what's even better is that the individual teams can take a considered approach to what they are trying to achieve within the collaboration process and the outcome they are trying to enable. Then they can utilize the network and collaboration tools to support that result. And there's more! The Fusion teams can design social interactions that bridge across and outside their individual product lines because we have more than just a product line and they know they have the social network to connect them. I know we have a superior product, but it is our ability to understand and execute across the enterprise that will enable us to deliver a much more robust and capable platform in the short term than our competitor can. We have built a product specifically designed for enterprise social collaboration which is not the same for the competition. We have delivered a much more effective solution - one in which individuals can easily collaborate to get results, while being confident that they know who has access to their information. Our platform has been pre-built to cross the company boundaries and enable our customers to collaborate, not just with their customers, but with their partners and suppliers as well. So Fusion addresses the combination of the enterprise application suite with enterprise collaboration and social networking. Oracle Social Network already has a feature function advantage over our competitor's tool providing a real added value to the employees. Plus Oracle has the ability to execute in a broad enterprise and cross-enterprise way that our competitors cannot. We have the power of a tool that provides the core social fabric across all of the applications, as well as supporting enterprise collaboration. That allows us to provide intelligent business insight, connections, and recommendations that our competitor simply can't. From our competitors, customers get integration for Sales; they get integration for Service, but then they have to integrate every other enterprise asset that they have by themselves. With Oracle, we are doing the integration. Fusion Applications will be pre-integrated, and over time, all of the applications in the business suite, including our Applications Unlimited and specialist industry applications, will connect to the Oracle Social Network. I'm confident these capabilities make Oracle Social Network the only collaboration platform on which to deliver the social enterprise.

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >