Search Results

Search found 14951 results on 599 pages for 'connect'.

Page 392/599 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

• ProFTPD pam_ecryptfs: Error getting passwd

  - by Olirav

  proftpd: pam_ecryptfs: Error getting passwd info for user [USERNAME] I am getting this error in the syslog nearly every time any user connects via FTP, the user is able to connect and the session seems to continue without a hitch. ProFTPD.log shows no error, this warning only show in the syslog. My VPS is running Ubuntu 11.10 and Proftpd 1.3.4rc2 from the Ubuntu Repo, I have made only a few changes to the config (no weird auth methods). This has been going on for quite a while but I can't quite find the cause. Anyone got any ideas?

  Read the article

• Multiple SSH private keys for the same host

  - by Sencha

  How can I store 2 different private SSH keys for the same host? I have tried 2 entries in /etc/ssh/ssh_config for the same host with the different keys, and I've also tried to put both keys in the same file and referencing it from one hosts setting, however both do not work. More detail: I'm running Ubuntu server (12.04) and I want to connect to GitHub via SSH to download the latest source for my projects. There are multiple projects running on the same server and each project has a GitHub repo with it's own unique deloyment key-pair. So the host is always the same (github.com) but the keys need to be different depending on which repo I'm using. Different /etc/ssh/ssh_config versions I have tried: Host github.com IdentityFile /etc/ssh/my_project_1_github_deploy_key StrictHostKeyChecking no Host github.com IdentityFile /etc/ssh/my_project_2_github_deploy_key StrictHostKeyChecking no and this with both keys in the same file: Host github.com IdentityFile /etc/ssh/my_project_github_deploy_keys StrictHostKeyChecking no I've had no luck with either. Any help would be greatly appreciated!

  Read the article

• Amazon EC2 firewall rules & VPN connections

  - by John

  I'm moving from Rackspace to Amazon EC2. One thing I like about our Rackspace setup is that it is extremely secure. The MySQL box can only be accessed via internal IPs, and we have a Cisco VPN firewall that allows us to dial in remotely and access port 3306 as though we were on the internal network. I'd like to figure out how to replicate this setup with EC2. How can I make the MySQL box so that port 3306 can only be accessed on the internal network? What about the VPN piece of things? I know Amazon has the VPC service, but it seems like that's for the purpose of connecting to an existing network. I don't have an existing network. I want to essentially create one inside Amazon and connect to that. What are my options? Any good tutorials on how to get started? Thanks in advance for your help

  Read the article

• Ubuntu 12.04 resolution stuck on 640x480

  - by user212483

  I am new to Ubuntu and I was trying to get my HDMI enabled TV to work with my Ubuntu 12.04 computer and I installed a Nvidia driver using the "additional drivers" program. After that didn't work, I started playing around with the dual booted windows 7 on my computer. Now, I've never used that windows since I installed it so I was stripped down to bare minimum so I tried to adjust the resolution(as it was on lowest resolution) and tried to connect the HDMI, which didn't work. After that I came back to my Ubuntu installation only to find out that it is now stuck on 640x480 resolution. I tried to remove the driver that I installed again using the "additional drivers" program but that didn't help at all. The error that showed up was - Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Any help would be appreciated as this is very annoying. Thanks

  Read the article

• Can gedit on mac be used to edit files over ssh?

  - by Dave

  I use a linux machine at work and a mac at home. I can ssh from my machine at home to my work machine. But the only editor that I have access to on the command line then is vi, which I don't like. Is there a way to use gedit on my mac to edit files remotely over an ssh connection? This page says that it can be done, but I think that it assumes that you are using gedit on ubuntu. On my mac (os 10.5.8) I don't have the "bookmark" option when I click "connect to server". http://thecodecentral.com/2010/04/02/use-gedit-as-remote-file-editor-via-ftp-and-ssh-ubuntu/comment-page-1#comment-50558

  Read the article

• VPN provider for remote access to servers from a known IP address

  - by brentkeller

  My organization has a few servers that are being hosted by a provider and we limit remote access to a whitelist and deny access to any IPs not on the whitelist. We would like to find a hosted VPN service that we can connect to that would give us a known IP that we could add to our whitelist and gain access to the servers while on the road. Does anyone know of any such services? I don't think we can just setup the VPN built in to Windows Server since the servers are hosted. Any suggestions would be appreciated.

  Read the article

• IP issue with Heartbeat & DRBD

  - by adam0345

  I'm in the process of setting up 3-node stacked DRBD, and i'm experiencing a rather bizarre issue. Two nodes are located at the data center, and the 3rd node is located locally. The Primary and Secondary nodes are working as expected, however the 3rd node won't connect to the primary. If I ping the IP provided by heartbeat on the 3rd node it will return 100% packet loss, if I reset networking interfaces, ping will then return a few successful packets, but then stop returning any packets. I can't work out any reason why this would be behaving like this. All nodes are running Debian Squeeze, and the latest version of DRBD.

  Read the article

• how long does noip ddns takes to make the updated address again accessible?

  - by neoDev

  Yesterday I've created a noip account, I've downloaded the updater client (DUC), I've configured them, and when I've tryied to browse "myaddress.noip.me" all worked fine... When my WAN IP changes, the DUC client quickly updates it in few minutes, and in my account on noip.com I can see that it is also refreshed properly. But the problem is that if I try to browse "myaddress.noip.me" after that update, the page does not load... "Unable to connect to myaddress.noip.me" After 6-7 hours it becomes again accessible, but I'm not sure if this is normal... I think this is too much time... Please help

  Read the article

• Node.js apps and wordpress on the same vps

  - by Msencenb

  So currently my linode (ubuntu 11.10) serves up three node.js apps for me using connect's vhost middleware listening on port 80. Here is an example of how vhost sets up a domain: var portfolio = require('./bootstrap-portfolio/lib/app.js'); var server = express(); server.use(express.vhost('sencedev.com',portfolio)); server.use(express.vhost('www.sencedev.com',portfolio)); server.listen(80); However I would now like to add a wordpress installation to my vps as well. In the past for me this has meant a traditional apache installation; however I'm a bit unsure of how node.js + a different webserver (apache or nginx) should interact. Any thoughts on how I should approach hosting wordpress + node.js on the same box?

  Read the article

• Micro Btx Motherboard Replacement.

  - by Judy

  I got the Vundo virus that took out the mobo and hard drive on my Gateway GT5220. Is there a replacement that will work? I'm willing to keep XP. I want to fix it the cheapest way possible. The mobo is a NVIDIA GeForce 6150 AM2 microBTX with primary IDE and 4 SATA connections. I want to use a new SATA as my primary, but would like to be able to connect my old IDE drives to transfer my pictures from them to the new drive. I would appreciate any help. Thanks!

  Read the article

• How can I remove unmounted SD Card icons from my desktop?

  - by user75286

  I have been using some audio utilities in Ubuntu 11.10 to tweak .mp3 files on my phone (Motorola Photon 4G). I connect via USB... both my phone and the internal SD card are mounted as two separate drives. The SD card has an unusual drive name with some odd characters. When I'm finished, I unmount my phone (or "safely remove drive"), but the SD card can't be unmounted. I've mounted and unmounted my phone on 4 occasions now, and there are now 4 SD card drive icons that I can't remove from the desktop. I tried using the gconf-editor/apps/nautilus/desktop trick to make drives invisible and it's not working. Right-clicking on the icons and selecting "unmount" produced the following error message; (I can't type the unusual drive name characters... replaced with xxx) Unable to unmount xxx umount: /media/xxx is not mounted (according to mtab) How can I remove the unwanted icons from the desktop and is there a method for avoiding this problem in the future? Thanks!

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• How can I disable the beep when I plug in/unplug my laptop's AC adapter?

  - by Dunaril

  My Packard-Bell laptop is emitting a loud, annoying beep when I connect or disconnect it to/from an AC power source. Whether I have headphones plugged in or not does not change anything; the sound goes out of the speakers and wakes everyone up. Do you know of any ways to eliminate this sound? I searched around the Internet and found a solution involving setting a specific volume bar to 0 in the playback settings, but I did not find it on my laptop. I am using Windows 7.

  Read the article

• FreePBX: Asterisk in the Cloud (EC2) Audio Problems

  - by neezer

  Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

  Read the article

• How to configure Linux to act as a Bluetooth RFCOMM SPP server?

  - by regulatre

  I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things. My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie. I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch). I imagine I have to start with something like sdptool add SP But then what? I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.

  Read the article

• How to address an EC2 instance from both inside and outside datacenter?

  - by Alexandr Kurilin

  I'm trying to find a good way of being able to address my EC2 database instance from both inside and outside of the datacenter. Other EC2 instances need to be able to call into it, and other clients like pgAdmin might need to connect to it from the outside world as well. It's my understanding that using the internal and external DNS names is sustainable long term as each reboot leads to a change. I'm thinking of associating an Elastic IP with the instance and giving it an A record (say db1.mydomain.com) which I then will use both within and outside the datacenter. Further instances in the same role will get the same treatment and a DNS record of db2.mydomain.com etc. Now, is there a cleaner and more stable way of achieving this result? Am going about this the wrong way? Suggestions?

  Read the article

• FreePBX: Asterisk in the Cloud (EC2) Audio Problems

  - by neezer

  Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

  Read the article

• MongoDB REST interface not listening after update

  - by Ones and Zeroes

  I replaced the mongodb-10gen install with the Ubuntu package (mongodb-server, mongodb-client and dev). apt-get install mongodb Thereafter, I am now unable to connect to the REST interface, where it worked before. Doing a wget to http://127.0.0.1:27018, I receive the following response: Connecting to 127.0.0.1:27018... failed: Connection refused. My previous /etc/mongodb.conf file had the following in: #enable REST rest = true Adding it to the packaged conf file does not resolve the issue, not even after restarting. I also tried changing the following with no effect: # Disable the HTTP interface (Defaults to localhost:27018). # nohttpinterface = true to # Disable the HTTP interface (Defaults to localhost:27018). nohttpinterface = false I have searched for days, and there doesn't seem to be anything on the Mongo site about a similar anomaly. If you have encountered a similar issue on Ubuntu Oneiric, please add your comments, even if you haven't found a solution to this issue.

  Read the article

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• Cannot redirect ip traffic with iptables to new ip on linux centOS

  - by Kiwi

  today I able to migrate some of the game servers to another server and needed some help to redirect the traffic from old ip to the new one. SERVER1 1.1.1.1 ----- (internet ) ----- SERVER 2.2.2.2 I asume to use iptables to perform this, for that used this rule on my centOS box in the server1. /etc/sysctl.conf: net.ipv4.ip_forward = 1 iptables -t nat -A PREROUTING -p udp --dest 1.1.1.1 --dport 27015 -j DNAT --to-destination 2.2.2.2:27015 iptables -t nat -A POSTROUTING -j MASQUERADE iptables -t nat -A POSTROUTING -d 2.2.2.2 -p udp --dport 27015 -j SNAT --to 1.1.1.1 But the client cannot connect to the server from the old ip, the redirection don't started.

  Read the article

• Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

  - by jindrichm

  I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

  Read the article

• Remote desktop fails with user denied until client reboot

  - by Andrew J. Brehm

  Sometimes (but often enough to anoy) Remote Desktop Connection cannot connect to a server (2008 R2 but maybe also 2003) and claims that "The connection was denied because the user account is not authorized for remote login." The user is always authorized for remote login and the connection works from other clients. (Although this is the very same message that appears when a user really isn't autorized for remote login.) The problem always goes away after a client restart. The client is always Windows 7 but I have no (other) reason to assume that it only affects Windows 7 clients. Any idea what causes this?

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• How to keep TightVNC client on Windows XP alive when connected to OS X?

  - by Craig

  I'm using TightVNC on my Windows XP workstations to connect to a remote OS X box (10.5.x) using OS X's VNC support. I've noticed that the TightVNC will become unresponsive after a period of inactivity. Is this a common issue? Restarting TightVNC solves the problem, but can be a bit annoying. Is there a solution to this? I don't suppose copy & paste between the two systems can be made to work?

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >