Search Results

Search found 14951 results on 599 pages for 'connect'.

Page 389/599 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

  • WiFi slow sometimes, reboot helps, how do I debug it?

    - by January
    Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

    Read the article

  • How do I purge or empty Windows Explorer's network username and sharename cache?

    - by Abel
    While troubleshooting a Samba vs Windows Network issue, I noticed that Windows' Explorer remembers login credentials of remote shares, even if you ask it not to. For instance, after accessing a share using \\servername\sharename plus entering username/password and then closing Windows Explorer, adding the same share as a network drive gives the following message, regardless whether the username is the same or not: The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share. Using NET USE does not show the share. After restarting the computer, I have no problems accessing the share using different credentials. But restarting just for testing other credentials is annoying, esp. while troubleshooting. How can I purge this cache, using Windows Vista? Note: using nbtstat -R[R], ipconfig /renew, killing explorer.exe or disabling / re-enabling the network card didn't help.

    Read the article

  • google video chat works faster on local LAN

    - by bashrc
    Recently the internet speed on our college LAN has dropped drastically. ( Avg file download speed 13 Kbps :( ). However g-talk's video chat remains unbelievably fluent when done with someone within the college's LAN. However video chat is practically impossible for anyone else who is not in the college network. My college has a proxy server through which all computers inside the college connect to the internet. I suspect its due to the proxy server. Also how g-talk maintains video chat? Is it something in the mechanism that speeds up video chat between two clients with the same IP? Since all computers use the same proxy,their IP would appear to be the same to google server.

    Read the article

  • Why does my netbook have more USB controllers than ports?

    - by yodaj007
    My netbook has three USB ports, but when I look in the device manager: Five are listed. Does this matter in the least (or, why are five listed)? The reason I bring this up: See, if I know that two of the devices in the device manager don't actually have physical ports, I can disable then and up that percentage on the other three, correct? I'm constantly being told that my devices can perform faster if I connect them to a USB 2.0 port, but this netbook is less than a year old. Thanks.

    Read the article

  • What are my X client options for MS Windows?

    - by Nick Bolton
    I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

    Read the article

  • How do I analyze an Apache Bench result?

    - by Alan Hoffmeister
    I need some help with analyzing a log from Apache Bench: Benchmarking texteli.com (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Server Hostname: texteli.com Server Port: 80 Document Path: /4f84b59c557eb79321000dfa Document Length: 13400 bytes Concurrency Level: 200 Time taken for tests: 37.030 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 13524000 bytes HTML transferred: 13400000 bytes Requests per second: 27.01 [#/sec] (mean) Time per request: 7406.024 [ms] (mean) Time per request: 37.030 [ms] (mean, across all concurrent requests) Transfer rate: 356.66 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 27 37 19.5 34 319 Processing: 80 6273 1673.7 6907 8987 Waiting: 47 3436 2085.2 3345 8856 Total: 115 6310 1675.8 6940 9022 Percentage of the requests served within a certain time (ms) 50% 6940 66% 6968 75% 6988 80% 7007 90% 7025 95% 7078 98% 8410 99% 8876 100% 9022 (longest request) What this results can tell me? Isn't 27 rps too slow?

    Read the article

  • One hard drive missing after converting from ide to ahci

    - by user700859
    I have two 500GB SATA HDD in my desktop running XP. After converting from IDE to AHCI, the HDD I use to store data can no longer be accessed from XP. It shows only the first partition as 150GB, and data type is listed as RAW. However, if I boot into a live linux environment or if I pull that HDD out and connect it using USB, I can still get to all my files again. So I completely formatted the HDD into one single partition. But XP still does not recognize it. It still shows the disk as the 150GB partition and data type is still RAW. What's going on and how do I fix this? Thanks in advance.

    Read the article

  • How can I share files from my Windows 7 machine to my friend's Ubuntu machine?

    - by ProfKaos
    I run a Windows 7 Pro SP1 laptop as my home machine, and my housemate runs an Ubuntu 12.04.1.05 desktop. We share a WLAN. I would like to make certain locations and files available for him to read and maybe write. How can I go about this? Bearing in mind I have very little recent experience with modern Linux, and Ubuntu in particular. My first idea is to share a Windows folder with my Ubuntu VM under VMWare Player, then his Ubuntu machine can connect to my Unbuntu VM, and the two can use whatever magic Ubuntu uses to achieve file sharing. This requires my Ubuntu VM to be always running though, and that may not always be possible. I have also heard that Samba may have a feature to help here, but I know nothing about that. How can I share my Windows files with my mate's Ubuntu machine, preferably with a 1 to 1 connection, i.e. rather not using shim VM's

    Read the article

  • How to receive mail in Qmail?

    - by Ivan
    I've a server that uses Qmail. It is installed by default and it is supposed to work. I've created a new domain and new user (vadddomain + vadduser) without problems, but when I send an email from Gmail to [email protected] (the address I've created) it desappears, it is. But if connect to SMTP server directly (telnet domain.com 25) and post an email it arrives to the user queue. What's happening?!? Note: If I try to access to my user through telnet domain.com 110 it seems my pwd is not correct and it's the same I used when created the user with vadduser

    Read the article

  • Laptop loses signal from WiFi router, but mobile phone holds it fine

    - by Anton
    I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

    Read the article

  • Create a tunnel to my dedicated windows server

    - by Mobiz
    I have a Win 2008 dedicated server. The remote access for MSSQL db is disabled. However I want to connect to it during development from my system. I need to create something like a tunnel from my lap so as to access it. I don't have static IP. Another reason for mentioning about creating tunnel is that my server IP has been whitelisted with other server. The data must originate from my dedicated server then only I can do the testing.

    Read the article

  • My MacBook Pro (2011) is dead

    - by Dave
    I connected my Sony digital camera with the MacBook and the screen turned black. I wonder why because the Sony camera was not on at the time and technically could not be accessed. So I thought it might be temporary and I turned on my camera. Well, it did not work, but my MacBook Pro has been dead since then. It will not turn on - when I hold the power button for five seconds, nothing happens. When I connect the charger cable, the green light is very dim and blinks a little (with about 20% illumination). I wonder what the problem is. I have to call Apple Care, but just so that I know, what could be wrong? Is my MacBook permanently dead? It might be under warranty but I am not sure.

    Read the article

  • unreachable subnet in one direction

    - by Carl Michaud
    I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

    Read the article

  • Windows Server 2003 guest on Xen frequently stops responding

    - by smokris
    I'm running a Windows Server 2003 guest instance in Xen 3.x. This DomU runs fine for a day or two, then stops responding — I don't get any network response, and I can no longer connect to Xen's VNC console for this DomU. xm list shows this: Name ID Mem VCPUs State Time(s) Domain-0 0 6508 8 r----- 1161159.4 [A working Linux DomU] 1 512 1 -b---- 68711.1 [The hung Windows DomU] 5 512 1 ------ 67234.2 [Another working Linux DomU] 3 512 1 -b---- 163036.4 (What does the ------ mean? The xm manual explains what each of the six states mean, but not what no-state means.) If I xm destroy and then xm create the Windows DomU again, it boots right back up (with the Windows alert The previous system shutdown at [...] was unexpected.), and then stops responding after another day or two. I checked /var/log/xen/*.log, but no log messages are generated at the time the server stops responding. How should I proceed in troubleshooting this?

    Read the article

  • Ubuntu Tools for recovering data from damaged USB Flash Drive ~ 10 Gb

    - by PREDA LUCIAN
    I have technical issues with my USB Flash Drive - JetFlash®V15 (TS16GJFV15) It's very critical situation because I can not see the data from it and I should get a way to recover them ASAP. So, in general, I have connected Non-stop that USB Flash Disk at my laptop. Was appear Power surges and when I was coming back, I saw that problem with it. Details regarding JetFlash®V15 (in present): - when I connect it on USP slot, the led is working intermittent and later on remain with constant light. - if I inspect the computer drivers, I found "Generic USB Flash Disk" (when the stick it's connected). - if I inspect "Properties", I can see next details: --- Type: unknown (application/octet-stream) --- Size: unknown --- Volume: unknown --- Accessed: unknown --- Modified: unknown I inspected that stick on 2 different computers (as well in different different USB Ports) and was the same problem, I can not see the content. I was checking with Windows 7 and Ubuntu 10.04 OS, but without success. With both OS was working before this issue. I'll appreciate an answer which will solve the problem, not an answer which will certify the problem. What I have to do, to recover the information form it (nearly 10 Gb)? I'm looking forward to be guided from a technical expert.

    Read the article

  • Adventures in Lab Management Configuration: CMMI Edition Part 1 of 3

    - by Enrique Lima
    I remember at one point someone telling me how close Migrate was to Migraine. This was a process that included an environment from TFS 2008 to TFS 2010, needed to be migrated too as far as the process template goes.  Here we are talking about CMMI v4.2 to CMMI v5.0.  Now, the process to migrate the TFS Infrastructure is one thing, migrating the Process Template is a different deal, not hard … just involved. Followed a combination of steps that came from a blog post as the main guidance and then MSDN (as suggested on the guidance post) to complement some tasks and steps. Again, the focus I have here is CMMI. The high level steps taken to enable the TFS 2008 CMMI v4.2 migrated to TFS 2010 Process Template are: 1)  Backup the Collection, Configuration and Warehouse Databases. 2)  Downloaded the Process Template using Visual Studio 2010. 3) Exported, modified and imported Bug Type Definition 4) Exported, modified and imported Scenario or Requirement Type Definition. 5) Created and imported bug field mappings. Now, we can attempt to connect using Test Manager, and you should be able to get this going. After that was done, it was time to enroll VMs that already existed in the environment.  This was a bit more challenging, but in the end it was a matter of just analyzing the changes that had been made to had a temporary work around from the time we migrated to the time we converted the Work Items and such and added fields to enable communication between the project and the Test and Lab Manager component. There are 2 more parts to this post, the second will describe the detailed steps taken to complete the Process Template update and the third will talk about the gotchas and fixes for the Lab Management portion.

    Read the article

  • Using video ports 'backwards'

    - by ACarter
    If I want to connect my laptop, which has a VGA output, to a monitor, I plug a VGA cable into both ends. The output being my laptop, and the input the monitor VGA output sockets are the same as VGA input sockets however, so what if I want to use my laptop as the monitor, with the video being outputted from somewhere else? As I said, VGA's output is the same as input, so in theory, I have the hardware in my laptop to do this. But presumably I need some software. So can I use the VGA port on a laptop as a video input? (And also, can this be done with HDMI?)

    Read the article

  • SSH authentification with public key fails

    - by palani
    I have my id_rsa.pub key under my /home/user/.ssh. I carefully copied that key and paste my key to respository Git account. While trying to connect from my local system to my git respository, I got the following error: warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.) I removed SSH in system and re-enable and did again, but no luck. I have no idea what's happening with my SSH key. Can any one please tell me on this? Note : I noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Transferring analog media (VHS casettes, vinyl records) to PC

    - by Javier Badia
    I have some VHSs and vinyl records which I'd like to convert to DVDs and CDs, respectively. I have a couple of questions about how to hook the devices up to the computer. I've seen some RCA-to-USB cables on the Internet like this one. Will those work for connecting the VCR to the computer? And what program would I use to take that and save it as a video file? Can I connect the phonograph directly to the Line In port in my PC or do I need some amplifier or something in the middle? I'm using Windows 7 x64, if it matters.

    Read the article

  • Comunication from Server to Client + Client LAN

    - by Filipe YaBa Polido
    I'm having some trouble with some network setup. I've tried OpenVPN, SocialVPN, Hamachi, still it is not working. This is my setup: Server A: NIC 1 with internet public address, NIC 2 to LAN Client B PC: NIC 1 (192.168.10.2) connects to router 192.168.10.1 Client B Device: 192.168.10.3 (Configured via software, can't do much here) Problem: Server A must connect to cliente device B. (I can install software needed at Client B PC). However... I can't change the router to some model with VPN like Draytek or Cisco :( OpenVPN fails at bridging, PC B can ping Server A, but Server A can't ping Device B, only PC B. What else can I do?!?!?

    Read the article

  • RDP connections keep dropping

    - by Shaul
    I have an odd problem on my notebook (HP Pavilion dv7). My Internet connection seems OK for the most part. But lately I've been having trouble with Remote Desktop connections. While I can connect to remote computers, the connection is very flaky, and usually drops after a few seconds. Sometimes it'll successfully reconnect automatically, and sometimes not. But even after successful reconnection, it'll just drop again after a few seconds. This appears to be independent of which RDP host I'm connecting to, and which network I'm connected to locally, whether wireless or wired. Other remote control apps like TeamViewer and Ammyy seem to work fine. Any ideas?

    Read the article

  • Internet problems

    - by dan
    I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

    Read the article

  • Authentication issues setting up iRedMail on Debian

    - by Sergio Rinaudo
    I'm setting up an exchange server using iRedMail. Following the official iRedMail installation guide (http://www.iredmail.org/install_iredmail_on_debian.html) and the Digital Ocean guide (https://www.digitalocean.com/community/articles/how-to-install-iredmail-on-ubuntu-12-04-x64) I was able to install iRedMail without any problems, so I have all the services up and running. I can configure domains and emails using iRedAdmin BUT I have problem both sending and receiving email, what I get from Roundcube is 'Authentication error' when trying to send an email. Also I can't receive anything. I also tried to connect to the mx server using telnet, it connects, but after the STARTTLS command, when I start to write "MAIL FROM:" the connection is lost. Something in the configuration is not working (at the moment I have the configuration written by the iRedMail installation) but I do not know where, I hope someone can enlight me! Thank you

    Read the article

  • Install Navicat for MySQL on Linux Ubuntu 12.04

    - by DanielAttard
    How do I install Navicat on Ubuntu Desktop 12.04? I have just configured a new Ubuntu 12.04. Because I'm not so familiar with the command line, I prefer to use Ubuntu Desktop so that I can have a GUI. Now I need to install a front-end to connect with MySQL. I prefer to use Navicat in a MAC environment, so I was hoping to install Navicat on the Ubuntu machine. I downloaded a Linux copy of Navicat for MySQL from here: http://www.navicat.com/download/navicat-for-mysql The problem I am having is that I don't know how to install the program after it has been downloaded. There is a navicat.exe file in the navicat folder, but that seems to be for a DOS/Windows environment. I just can't figure out how to install Navicat onto Ubuntu Desktop 12.04. Anyone have any ideas? Thanks.

    Read the article

  • Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

    - by Martin Janiczek
    I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to

    Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >