description logic - Page 392

Ubuntu 12.04 / 12.10 Randomly Freezing - nVidia?

- by Alix Axel

My Ubuntu install frequently freezes, sometimes showing a black screen (not very common anymore - in my latest installs), some other times the mouse and keyboard just fail to move and respond (not even Ctrl + Alt + F1 works) and some other times I'm able to move the mouse with a huge delay (2-5 seconds) but I'm not able to do/click anything. I have a pretty strong feeling that this problem is related to my graphic card drivers because: after hard reset, I usually get error reports about X.org / jockey it's common for artifacts to appear during loading / shutdown / whenever, for instance: pattern filled with £ during log off ugly-colored squared pattern during boot windows that are partially moved (i.e.: only the top half) Firefox renderings that leave the bottom ~30% of the page black These artifacts appear right before the system freezes. I've installed Ubuntu 12.04 LTS and after several failed attempts to get my dual monitor setup to work properly I tried installing the new 12.10 version, hoping that this new version would have this problem solved... Unfortunatly, that was not the case, so I reverted to Ubuntu 12.04. I've tried all the drivers in the Additional Drivers application (even the experimental ones), I've also tried the nvidia-current package from the PPA repository ubuntu-x-swat/x-updates as well as the nouveau OSS driver. Nothing (except no driver at all with a 640*480 resolution) at all seems stable. Here is the info of my graphic card: alix@alix-E500:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8400M G] (rev a1) alix@alix-E500:~$ sudo lshw -C video [sudo] password for alix: *-display description: VGA compatible controller product: G86 [GeForce 8400M G] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fe0e0000-fe0fffff Right now, I don't even have my 22" monitor connected as I can't even get my laptop display to work properly and without freezes. I've searched, read and tried all that I could (over several fresh reinstalls) to fix the problem, but so far, no solution has proven definitive. I'm sorry I can't precise which symptom maps to each driver but I've been trying to solve this one on my own without logging what I'm doing, perhaps someone here will be able to point me to a certain-fix solution, if not I'll keep updating this question as I go along. Please let me know if any more info is needed to pinpoint the exact problem. Trying out NVIDIA accelerated graphics driver (version 173). The scrolling, minimizing / maximizing windows takes between 2 and 5 seconds to finalize. Context menus also pop up very slowly and the typing seems delayed by ~1 second. No critical issues so far. Firefox rendering of the Save Edits button is consistently messed up (random black lines in the top). Trying out NVIDIA accelerated graphics driver (version current) [Recommended]. All the delays mentioned above and the buggy rendering of the Save Edits button are gone, but I'm noticing that the whole screen flashes black for a couple of microseconds and while I was writing this test for the first time, the bottom 30% of the screen went black and I couldn't do anything (not even Ctrl + Alt + F1 would work). Had to force a hard reset. Also, the system hanged a little for a couple of seconds with the fade out of the "Restart" menu. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-304). Same symptoms as before, it crashed once while I was trying to install Chromium and again after a hard reset when I was trying to remove the driver. The bottom of the screen did not went black and I could move my mouse both times. Ctrl + Alt + F1 didn't work. The ugly-colored pattern also showed up during the second boot. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-307). The system crashed as soon as I clicked something. Had to do a fresh re-install. Trying out Nouveau: Accelerated Open Source driver for nVidia cards. Artifacts still show up during boot but other than that this one seems stable. As soon as I connected my second monitor, the responsiveness dropped a lot, animations and video are somewhat slow. I'm gonna try this solution http://askubuntu.com/a/98871/9018 later on.

Read the article

Whether to use UNION or OR in SQL Server Queries

- by Dinesh Asanka

Recently I came across with an article on DB2 about using Union instead of OR. So I thought of carrying out a research on SQL Server on what scenarios UNION is optimal in and which scenarios OR would be best. I will analyze this with a few scenarios using samples taken from the AdventureWorks database Sales.SalesOrderDetail table. Scenario 1: Selecting all columns So we are going to select all columns and you have a non-clustered index on the ProductID column. --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR ProductID =709 OR ProductID =998 OR ProductID =875 OR ProductID =976 OR ProductID =874 --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 709 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 998 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 875 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 976 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 874 So query 1 is using OR and the later is using UNION. Let us analyze the execution plans for these queries. Query 1 Query 2 As expected Query 1 will use Clustered Index Scan but Query 2, uses all sorts of things. In this case, since it is using multiple CPUs you might have CX_PACKET waits as well. Let’s look at the profiler results for these two queries: CPU Reads Duration Row Counts OR 78 1252 389 3854 UNION 250 7495 660 3854 You can see from the above table the UNION query is not performing well as the OR query though both are retuning same no of rows (3854).These results indicate that, for the above scenario UNION should be used. Scenario 2: Non-Clustered and Clustered Index Columns only --Query 1 : OR SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR ProductID =709 OR ProductID =998 OR ProductID =875 OR ProductID =976 OR ProductID =874 GO --Query 2 : UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 709 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 998 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 875 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 976 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 874 GO So this time, we will be selecting only index columns, which means these queries will avoid a data page lookup. As in the previous case we will analyze the execution plans: Query 1 Query 2 Again, Query 2 is more complex than Query 1. Let us look at the profile analysis: CPU Reads Duration Row Counts OR 0 24 208 3854 UNION 0 38 193 3854 In this analyzis, there is only slight difference between OR and UNION. Scenario 3: Selecting all columns for different fields Up to now, we were using only one column (ProductID) in the where clause. What if we have two columns for where clauses and let us assume both are covered by non-clustered indexes? --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR CarrierTrackingNumber LIKE 'D0B8%' --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE CarrierTrackingNumber LIKE 'D0B8%' Query 1 Query 2: As we can see, the query plan for the second query has improved. Let us see the profiler results. CPU Reads Duration Row Counts OR 47 1278 443 1228 UNION 31 1334 400 1228 So in this case too, there is little difference between OR and UNION. Scenario 4: Selecting Clustered index columns for different fields Now let us go only with clustered indexes: --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR CarrierTrackingNumber LIKE 'D0B8%' --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE CarrierTrackingNumber LIKE 'D0B8%' Query 1 Query 2 Now both execution plans are almost identical except is an additional Stream Aggregate is used in the first query. This means UNION has advantage over OR in this scenario. Let us see profiler results for these queries again. CPU Reads Duration Row Counts OR 0 319 366 1228 UNION 0 50 193 1228 Now see the differences, in this scenario UNION has somewhat of an advantage over OR. Conclusion Using UNION or OR depends on the scenario you are faced with. So you need to do your analyzing before selecting the appropriate method. Also, above the four scenarios are not all an exhaustive list of scenarios, I selected those for the broad description purposes only.

Read the article

Big Data – Operational Databases Supporting Big Data – Key-Value Pair Databases and Document Databases – Day 13 of 21

- by Pinal Dave

In yesterday’s blog post we learned the importance of the Relational Database and NoSQL database in the Big Data Story. In this article we will understand the role of Key-Value Pair Databases and Document Databases Supporting Big Data Story. Now we will see a few of the examples of the operational databases. Relational Databases (Yesterday’s post) NoSQL Databases (Yesterday’s post) Key-Value Pair Databases (This post) Document Databases (This post) Columnar Databases (Tomorrow’s post) Graph Databases (Tomorrow’s post) Spatial Databases (Tomorrow’s post) Key Value Pair Databases Key Value Pair Databases are also known as KVP databases. A key is a field name and attribute, an identifier. The content of that field is its value, the data that is being identified and stored. They have a very simple implementation of NoSQL database concepts. They do not have schema hence they are very flexible as well as scalable. The disadvantages of Key Value Pair (KVP) database are that they do not follow ACID (Atomicity, Consistency, Isolation, Durability) properties. Additionally, it will require data architects to plan for data placement, replication as well as high availability. In KVP databases the data is stored as strings. Here is a simple example of how Key Value Database will look like: Key Value Name Pinal Dave Color Blue Twitter @pinaldave Name Nupur Dave Movie The Hero As the number of users grow in Key Value Pair databases it starts getting difficult to manage the entire database. As there is no specific schema or rules associated with the database, there are chances that database grows exponentially as well. It is very crucial to select the right Key Value Pair Database which offers an additional set of tools to manage the data and provides finer control over various business aspects of the same. Riak Rick is one of the most popular Key Value Database. It is known for its scalability and performance in high volume and velocity database. Additionally, it implements a mechanism for collection key and values which further helps to build manageable system. We will further discuss Riak in future blog posts. Key Value Databases are a good choice for social media, communities, caching layers for connecting other databases. In simpler words, whenever we required flexibility of the data storage keeping scalability in mind – KVP databases are good options to consider. Document Database There are two different kinds of document databases. 1) Full document Content (web pages, word docs etc) and 2) Storing Document Components for storage. The second types of the document database we are talking about over here. They use Javascript Object Notation (JSON) and Binary JSON for the structure of the documents. JSON is very easy to understand language and it is very easy to write for applications. There are two major structures of JSON used for Document Database – 1) Name Value Pairs and 2) Ordered List. MongoDB and CouchDB are two of the most popular Open Source NonRelational Document Database. MongoDB MongoDB databases are called collections. Each collection is build of documents and each document is composed of fields. MongoDB collections can be indexed for optimal performance. MongoDB ecosystem is highly available, supports query services as well as MapReduce. It is often used in high volume content management system. CouchDB CouchDB databases are composed of documents which consists fields and attachments (known as description). It supports ACID properties. The main attraction points of CouchDB are that it will continue to operate even though network connectivity is sketchy. Due to this nature CouchDB prefers local data storage. Document Database is a good choice of the database when users have to generate dynamic reports from elements which are changing very frequently. A good example of document usages is in real time analytics in social networking or content management system. Tomorrow In tomorrow’s blog post we will discuss about various other Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

WebGrid Helper and Complex Types

- by imran_ku07

Introduction: WebGrid helper makes it very easy to show tabular data. It was originally designed for ASP.NET Web Pages(WebMatrix) to display, edit, page and sort tabular data but you can also use this helper in ASP.NET Web Forms and ASP.NET MVC. When using this helper, sometimes you may run into a problem if you use complex types in this helper. In this article, I will show you how you can use complex types in WebGrid helper. Description: Let's say you need to show the employee data and you have the following classes, public class Employee { public string Name { get; set; } public Address Address { get; set; } public List<string> ContactNumbers { get; set; } } public class Address { public string City { get; set; } } The Employee class contain a Name, an Address and list of ContactNumbers. You may think that you can easily show City in WebGrid using Address.City, but no. The WebGrid helper will throw an exception at runtime if any Address property is null in the Employee list. Also, you cannot directly show ContactNumbers property. The easiest way to show these properties is to add some additional properties, public Address NotNullableAddress { get { return Address ?? new Address(); } } public string Contacts { get { return string.Join("; ",ContactNumbers); } } Now you can easily use these properties in WebGrid. Here is the complete code of this example, @functions{ public class Employee { public Employee(){ ContactNumbers = new List<string>(); } public string Name { get; set; } public Address Address { get; set; } public List<string> ContactNumbers { get; set; } public Address NotNullableAddress { get { return Address ?? new Address(); } } public string Contacts { get { return string.Join("; ",ContactNumbers); } } } public class Address { public string City { get; set; } } } @{ var myClasses = new List<Employee>{ new Employee { Name="A" , Address = new Address{ City="AA" }, ContactNumbers = new List<string>{"021-216452","9231425651"}}, new Employee { Name="C" , Address = new Address{ City="CC" }}, new Employee { Name="D" , ContactNumbers = new List<string>{"045-14512125","21531212121"}} }; var grid = new WebGrid(source: myClasses); } @grid.GetHtml(columns: grid.Columns( grid.Column("NotNullableAddress.City", header: "City"), grid.Column("Name"), grid.Column("Contacts"))) Summary: You can use WebGrid helper to show tabular data in ASP.NET MVC, ASP.NET Web Forms and ASP.NET Web Pages. Using this helper, you can also show complex types in the grid. In this article, I showed you how you use complex types with WebGrid helper. Hopefully you will enjoy this article too.

Read the article

The EXECUTE permission was denied on the object 'bam_Metadata_GetConfigurationXml'

- by Andy Morrison

We were seeing this exception on two servers when we tried to access the BAM Portal... after having to reconfigure the BAM Portal and Tools for reasons unrelated to the error: --- Log Name: Application Source: Bam Web Service Date: 2/18/2011 10:24:07 AM Event ID: 1534 Task Category: None Level: Error Keywords: Classic User: N/A Computer: yyyyyyyyyyyyyyyyyyyy Description: Current User: yy\yyyyyyyy EXCEPTION: Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "yyyyyyyyyyyyyyy". ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'bam_Metadata_GetConfigurationXml', database 'BAMPrimaryImport', schema 'dbo'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction) at Microsoft.BizTalk.Bam.Management.BamConfigurationManager.GetConfigurationXmlFromPrimaryImportDb() at Microsoft.BizTalk.Bam.Management.BamConfigurationManager..ctor(String piServer, String piDatabase, Int32 sqlHelperCmdTimeout, Boolean validateServerNames) at Microsoft.BizTalk.Bam.Management.BamManager..ctor(String primaryImportServer, String primaryImportDatabase, Int32 sqlCmdTimeout, Boolean validateServerNames) at Microsoft.BizTalk.Bam.Management.BamManager..ctor(String primaryImportServer, String primaryImportDatabase) at Microsoft.BizTalk.Bam.WebServices.Utilities.FetchBamManager() at Microsoft.BizTalk.Bam.WebServices.Management.BamManagementService.GetViewSummaryForCurrentUser() EXCEPTION: Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "yyyyyyyyyyyyyyyyyy". ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'bam_Metadata_GetConfigurationXml', database 'BAMPrimaryImport', schema 'dbo'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction) at Microsoft.BizTalk.Bam.Management.BamConfigurationManager.GetConfigurationXmlFromPrimaryImportDb() at Microsoft.BizTalk.Bam.Management.BamConfigurationManager..ctor(String piServer, String piDatabase, Int32 sqlHelperCmdTimeout, Boolean validateServerNames) at Microsoft.BizTalk.Bam.Management.BamManager..ctor(String primaryImportServer, String primaryImportDatabase, Int32 sqlCmdTimeout, Boolean validateServerNames) at Microsoft.BizTalk.Bam.Management.BamManager..ctor(String primaryImportServer, String primaryImportDatabase) at Microsoft.BizTalk.Bam.WebServices.Utilities.FetchBamManager() at Microsoft.BizTalk.Bam.WebServices.Management.BamManagementService.GetViewSummaryForCurrentUser() --- We reconfigured the BAM Portal and Tools multiple times, trying to fix this issue, but kept getting the exception. The fix was to add the BizTalk Server Administrators and BizTalk Application Users to the BAM_ManagementWS role in the BAMPrimaryImport database. (Note that these two groups do not appear to be added to this role in a "clean" configuration. Thanks go to Ed at http://talentedmonkeys.wordpress.com/ for figuring out a solution.

Read the article

InfoPath 2010 Form Design and Web Part Deployment

- by JKenderdine

In January I had the pleasure to speak at SharePoint Saturday Virginia Beach. I presented a session on InfoPath 2010 forms design which included some of the basics of Forms Design, description of some of the new options with InfoPath 2010 and SharePoint 2010, and other integration possibilities. Included below is the information presented as well as the solution to create the demo: First thing you need to understand is what the difference is between an InfoPath List form and a Form Library Form? SharePoint List Forms: Store data directly in a SharePoint list. Each control (e.g. text box) in the form is bound to a column in the list. SharePoint list forms are directly connected to the list, which means that you don’t have to worry about setting up the publish and submit locations. You also do not have the option for back-end code. Form Library Forms: Store data in XML files in a SharePoint form library. This means they are more flexible and you can do more with them. For example, they can be configured to save drafts and submit to different locations. However, they are more complex to work with and require more decisions to be made during configuration. You do have the option of back-end code with these type of forms. Next steps: You need to create your File Architecture Plan. Plan the location for the saved template – both Test and Production (This is pretty much a given, but just in case - Always make sure to have a test environment) Plan for the location of the published template Then you need to document your Form Template Design Plan. Some questions to ask to gather your requirements: What will the form be designed to do? Will it gather user information? Will it display data from a data source? Do we need to show different views to different users? What do we base this on? How will it be implemented for the users? Browser or Client based form Site collection content type – Published through Central Admin Form Library – Published directly to form library So what are the requirements for this template? Business Card Request Form Template Design Plan Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Show and hide fields as necessary for requirements Create multiple views – one for those submitting the form and another view for the executive assistants placing the orders. Browser based form integrated into SharePoint team site Published directly to form library The form was published through Central Administration and incorporated into the site as a content type. Utilizing the new InfoPath Web part, the form is integrated into the page and the users can complete the form directly from within that page. For now, if you are interested in the final form XSN, contact me using the Contact link above. I will post soon with the details on how the form was created and how it integrated the requirements detailed above.

Read the article

Silverlight Cream for January 12, 2011 -- #1025

- by Dave Campbell

In this Issue: Amyo Kabir, Rob Eisenberg, Doug Rathbone, John Papa, Jeff Blankenburg(-2-), Mike Taulty, Peter Kuhn, Laurent Bugnion, Vangos Pterneas, and Senthil Kumar. Above the Fold: Silverlight: "Silverlight Popup sample" Amyo Kabir WP7: "Navigation in a #WP7 application with MVVM Light" Laurent Bugnion XNA: "XNA for Silverlight developers: Part 0 - Why should I care?" Peter Kuhn Shoutouts: Mohamed Mosallem posted a video of an Expression Blend demo he gave recently: Expression Blend Demo Rob Eisenberg posted the winners of the Caliburn.Micro Contest he was running .. and a nice bunch of swag too! Announcing the Caliburn.Micro Contest Winners! Dan Moyer is a LightSwitch enthusiast and writes Why I Believe Visual Studio LightSwitch will be a Win... good well-thought-out and written take on Lightswitch. From SilverlightCream.com: Silverlight Popup sample Amyo Kabir has a post up that is short on description but long on demo and the code is available... put this in the 'a picture is worth 1,000 words category' :) Caliburn.Micro Soup to Nuts Part 7 - All About Conventions The 7th episode of Rob Eisenberg's tutorial series on Caliburn.Micro is up. This episode about some of the conventions that you get out-of-the-box with Caliburn.Micro, what it'll do for you, and how you can modify the behavior of the convention to suit your own taste/style. Two little tips for working with Silverlight chart DateTime Axes Doug Rathbone has been working with the Toolkit Charts for WP7 and finding it difficult to get the info he needs, and now that he's worked it out... he's sharing... particularly information about DateTimeAxis. Silverlight TV 56: WCF RIA Services and Azure The first Silverlight TV of 2011 was John Papa discussing WCF RIA Services and Azure with Saurabh Plant. What I Learned In WP7 – Issue 14 As usual, Jeff Blankenburg is a couple ahead of me... his Issue 14 is about some panorama trickery... like navigating to a specific place in one, or preventing wrapping. What I Learned In WP7 – Issue 15 In Jeff Blankenburg's latest WP7 post, he's sharing some interesting insight into Trial Mode and app sales... from the standpoint of someone selling apps. Blend Bits 20–Group Into Mike Taulty has Part 20 of his Blend Bits series up. This one is demonstrating grouping, and what all can be accomplished (or not) with grouping in Blend. XNA for Silverlight developers: Part 0 - Why should I care? Peter Kuhn has the beginning of a series on WP7 and XNA up at SilverlightShow... this looks to be a good intro and way to get your head wrapped around XNA on the phone. Navigation in a #WP7 application with MVVM Light Laurent Bugnion discusses WP7 navigation via MVVM Light, resolving many of the communication/navigation complexities you can get involved in without a tool like his. Motion detection in Silverlight Vangos Pterneas has a followup postto the one on facial detection... this one is on Motion Detection in Silverlight. If you've got a webcam hooked up, you can give a demo app a dance via a link he has in the post. Adding ApplicationBar in Windows Phone 7 using Expression Blend Senthil Kumar follows up a post about using VS to add an application bar to a WP7 app with this one using Expression Blend Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

SPARC T4-2 Produces World Record Oracle Essbase Aggregate Storage Benchmark Result

- by Brian

Significance of Results Oracle's SPARC T4-2 server configured with a Sun Storage F5100 Flash Array and running Oracle Solaris 10 with Oracle Database 11g has achieved exceptional performance for the Oracle Essbase Aggregate Storage Option benchmark. The benchmark has upwards of 1 billion records, 15 dimensions and millions of members. Oracle Essbase is a multi-dimensional online analytical processing (OLAP) server and is well-suited to work well with SPARC T4 servers. The SPARC T4-2 server (2 cpus) running Oracle Essbase 11.1.2.2.100 outperformed the previous published results on Oracle's SPARC Enterprise M5000 server (4 cpus) with Oracle Essbase 11.1.1.3 on Oracle Solaris 10 by 80%, 32% and 2x performance improvement on Data Loading, Default Aggregation and Usage Based Aggregation, respectively. The SPARC T4-2 server with Sun Storage F5100 Flash Array and Oracle Essbase running on Oracle Solaris 10 achieves sub-second query response times for 20,000 users in a 15 dimension database. The SPARC T4-2 server configured with Oracle Essbase was able to aggregate and store values in the database for a 15 dimension cube in 398 minutes with 16 threads and in 484 minutes with 8 threads. The Sun Storage F5100 Flash Array provides more than a 20% improvement out-of-the-box compared to a mid-size fiber channel disk array for default aggregation and user-based aggregation. The Sun Storage F5100 Flash Array with Oracle Essbase provides the best combination for large Oracle Essbase databases leveraging Oracle Solaris ZFS and taking advantage of high bandwidth for faster load and aggregation. Oracle Fusion Middleware provides a family of complete, integrated, hot pluggable and best-of-breed products known for enabling enterprise customers to create and run agile and intelligent business applications. Oracle Essbase's performance demonstrates why so many customers rely on Oracle Fusion Middleware as their foundation for innovation. Performance Landscape System Data Size(millions of items) Database Load(minutes) Default Aggregation(minutes) Usage Based Aggregation(minutes) SPARC T4-2, 2 x SPARC T4 2.85 GHz 1000 149 398* 55 Sun M5000, 4 x SPARC64 VII 2.53 GHz 1000 269 526 115 Sun M5000, 4 x SPARC64 VII 2.4 GHz 400 120 448 18 * – 398 mins with CALCPARALLEL set to 16; 484 mins with CALCPARALLEL threads set to 8 Configuration Summary Hardware Configuration: 1 x SPARC T4-2 2 x 2.85 GHz SPARC T4 processors 128 GB memory 2 x 300 GB 10000 RPM SAS internal disks Storage Configuration: 1 x Sun Storage F5100 Flash Array 40 x 24 GB flash modules SAS HBA with 2 SAS channels Data Storage Scheme Striped - RAID 0 Oracle Solaris ZFS Software Configuration: Oracle Solaris 10 8/11 Installer V 11.1.2.2.100 Oracle Essbase Client v 11.1.2.2.100 Oracle Essbase v 11.1.2.2.100 Oracle Essbase Administration services 64-bit Oracle Database 11g Release 2 (11.2.0.3) HP's Mercury Interactive QuickTest Professional 9.5.0 Benchmark Description The objective of the Oracle Essbase Aggregate Storage Option benchmark is to showcase the ability of Oracle Essbase to scale in terms of user population and data volume for large enterprise deployments. Typical administrative and end-user operations for OLAP applications were simulated to produce benchmark results. The benchmark test results include: Database Load: Time elapsed to build a database including outline and data load. Default Aggregation: Time elapsed to build aggregation. User Based Aggregation: Time elapsed of the aggregate views proposed as a result of tracked retrieval queries. Summary of the data used for this benchmark: 40 flat files, each of size 1.2 GB, 49.4 GB in total 10 million rows per file, 1 billion rows total 28 columns of data per row Database outline has 15 dimensions (five of them are attribute dimensions) Customer dimension has 13.3 million members 3 rule files Key Points and Best Practices The Sun Storage F5100 Flash Array has been used to accelerate the application performance. Setting data load threads (DLTHREADSPREPARE) to 64 and Load Buffer to 6 improved dataloading by about 9%. Factors influencing aggregation materialization performance are "Aggregate Storage Cache" and "Number of Threads" (CALCPARALLEL) for parallel view materialization. The optimal values for this workload on the SPARC T4-2 server were: Aggregate Storage Cache: 32 GB CALCPARALLEL: 16 See Also Oracle Essbase Aggregate Storage Option Benchmark on Oracle's SPARC T4-2 Server oracle.com Oracle Essbase oracle.com OTN SPARC T4-2 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 28 August 2012.

Read the article

Serving up a RSS feed in MVC using WCF Syndication

- by brian_ritchie

With .NET 3.5, Microsoft added the SyndicationFeed class to WCF for generating ATOM 1.0 & RSS 2.0 feeds. In .NET 3.5, it lives in System.ServiceModel.Web but was moved into System.ServiceModel in .NET 4.0. Here's some sample code on constructing a feed: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: SyndicationFeed feed = new SyndicationFeed(title, description, new Uri(link)); 2: feed.Categories.Add(new SyndicationCategory(category)); 3: feed.Copyright = new TextSyndicationContent(copyright); 4: feed.Language = "en-us"; 5: feed.Copyright = new TextSyndicationContent(DateTime.Now.Year + " " + ownerName); 6: feed.ImageUrl = new Uri(imageUrl); 7: feed.LastUpdatedTime = DateTime.Now; 8: feed.Authors.Add(new SyndicationPerson() { Name = ownerName, Email = ownerEmail }); 9: 10: var feedItems = new List<SyndicationItem>(); 11: foreach (var item in Items) 12: { 13: var sItem = new SyndicationItem(item.title, null, new Uri(link)); 14: sItem.Summary = new TextSyndicationContent(item.summary); 15: sItem.Id = item.id; 16: if (item.publishedDate != null) 17: sItem.PublishDate = (DateTimeOffset)item.publishedDate; 18: sItem.Links.Add(new SyndicationLink() { Title = item.title, Uri = new Uri(link), Length = item.size, MediaType = item.mediaType }); 19: feedItems.Add(sItem); 20: } 21: feed.Items = feedItems; Then, we create a custom ContentResult to serialize the feed & stream it to the client: 1: public class SyndicationFeedResult : ContentResult 2: { 3: public SyndicationFeedResult(SyndicationFeed feed) 4: : base() 5: { 6: using (var memstream = new MemoryStream()) 7: using (var writer = new XmlTextWriter(memstream, System.Text.UTF8Encoding.UTF8)) 8: { 9: feed.SaveAsRss20(writer); 10: writer.Flush(); 11: memstream.Position = 0; 12: Content = new StreamReader(memstream).ReadToEnd(); 13: ContentType = "application/rss+xml" ; 14: } 15: } 16: } Finally, we wire it up through the controller: 1: public class RssController : Controller 2: { 3: public SyndicationFeedResult Feed() 4: { 5: var feed = new SyndicationFeed(); 6: // populate feed... 7: return new SyndicationFeedResult(feed); 8: } 9: } In the next post, I'll discuss how to add iTunes markup to the feed to publish it on iTunes as a Podcast.

Read the article

Thread safe double buffering

- by kdavis8

I am trying to implement a draw map method that will draw the tiled image across the surface of the component. I'm having issue with this code. The double buffering does not seem to be working, because the sprite flickers like crazy; my source code: package myPackage; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Image; import java.awt.Toolkit; import java.awt.image.BufferStrategy; import java.awt.image.BufferedImage; import javax.swing.JFrame; public class GameView extends JFrame implements Runnable { public BufferedImage backbuffer; public Graphics2D g2d; public Image img; Thread gameloop; Scene scene; public GameView() { super("Game View"); setSize(600, 600); setVisible(true); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); backbuffer = new BufferedImage(getWidth(), getHeight(), BufferedImage.TYPE_INT_RGB); g2d = backbuffer.createGraphics(); Toolkit tk = Toolkit.getDefaultToolkit(); img = tk.getImage(this.getClass().getResource("cage.png")); scene = new Scene(g2d, this); gameloop = new Thread(this); gameloop.start(); } public static void main(String args[]) { new GameView(); } public void paint(Graphics g) { g.drawImage(backbuffer, 0, 0, this); repaint(); } @Override public void run() { // TODO Auto-generated method stub Thread t = Thread.currentThread(); while (t == gameloop) { scene.getScene("dirtmap"); g2d.drawImage(img, 80, 80,this![enter image description here][1]); } } private void drawScene(String string) { // TODO Auto-generated method stub // g2d.setColor(Color.white); // g2d.fillRect(0, 0, getWidth(), getHeight()); scene.getScene(string); } } package myPackage; import java.awt.Color; import java.awt.Component; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Image; import java.awt.Toolkit; public class Scene { Graphics g2d; Component c; boolean loaded = false; public Scene(Graphics2D gr, Component co) { g2d = gr; c = co; } public void getScene(String mapName) { Toolkit tk = Toolkit.getDefaultToolkit(); Image tile = tk.getImage(this.getClass().getResource("dirt.png")); // g2d.setColor(Color.red); for (int y = 0; y <= 18; y++) { for (int x = 0; x <= 18; x += 1) { g2d.drawImage(tile, x * 32, y * 32, c); } } loaded = true; } }

Read the article

Partner Webcast - Migration to Weblogic Server 11g

- by lukasz.romaszewski(at)oracle.com

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:RO;} Partner Webcast - Migration to Weblogic Server 11g March 25th, 12noonCET (1pm EET/ 11am GMT) Description The Oracle WebLogic 11g application server product line is the industry's most comprehensive Java platform for developing, deploying, and integrating enterprise applications. It provides the foundation for application grid, which is an architecture that enables enterprises to outperform their competitors while minimizing operational costs. Agenda 1. 1. Introduction to the Oracle WebLogic Server 11g 2. 2. Migration Process overview 3. 3. Migrating from iAS 10g a. SmartUpgrade utility introduction b. SmartUpgrade Demo 4. 4. Migrating from other JEE application servers a. Understanding potential caveats b. Using WebLogic classloader mechanism to isolate application c. Shared libraries overview 5. 5. Migrating Oracle Fusion Middleware components (Forms&Reports, ADF, SOA etc) 6. 6. Summary 7. 7. Q&A Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. To register, click here For any questions please contact [email protected]. Registrations received less than 24hours prior to start time may not receive confirmation to attend.

Read the article

Implementing Search for BlogReader Windows 8 Sample

- by Harish Ranganathan

The BlogReader sample is an excellent place to start speeding up your Windows 8 development skills. The tutorial is available here and the complete source code is available here Create a project called WindowsBlogReader and create pages for ItemsPage.xaml, SplitPage.xaml and DetailPage.xaml and copy the corresponding code blocks from the sample listed above. Created a class file FeedData.cs and copy the code. Finally, create a class DateConverter.cs and copy the code associated with it. With that you should be able to build and run the project. There seems to be one issue in the sample feeds listed that the first week (feed1) doesn’t seem to expose it. So you can skip that and use the second feed as first feed. You will end up with one feed less but it works. I had demonstrated this in the recent TechDays at Chennai. How we can use the Search Contract and implement Search for within the Blog Titles. First off, we need to declare that the App will be using Search Contract, in the Package.appmanifest file Next, we would need a handle of the Search Contract when user types on the search window in Charms Menu. If you had completed the code sample from the link above, you would have ItemsPage.xaml and ItemsPage.xaml.cs. Open the ItemsPage.xaml.cs. Import the namespaces using System.Collections.ObjectModel and System.Linq. in the ItemsPage() constructor, right after this.InitializeComponent(); add the following code Windows.ApplicationModel.Search.SearchPane.GetForCurrentView().QuerySubmitted += ItemsPage_QuerySubmitted; This event is fired when users open up the Search Panel from Charms Menu, type something and hit enter. We need to handle this event declared in the delegate. For that we need to pull the FeedDataSource instantiation to the root of the class to make it global. So, add the following as the first line within the partial class FeedDataSource feedDataSource; Also, modify the LoadState method, as follows:- protected override void LoadState(Object navigationParameter, Dictionary<String, Object> pageState) { feedDataSource = (FeedDataSource)App.Current.Resources["feedDataSource"]; if (feedDataSource != null) { this.DefaultViewModel["Items"] = feedDataSource.Feeds; } } Next is to implement the ItemsPage_QuerySubmitted method void ItemsPage_QuerySubmitted(Windows.ApplicationModel.Search.SearchPane sender, Windows.ApplicationModel.Search.SearchPaneQuerySubmittedEventArgs args) { this.DefaultViewModel["Items"] = from dynamic item in feedDataSource.Feeds where item.Title.Contains(args.QueryText) select item; } As you can see we are almost using the same defaultviewmodel with the change that we are using a linq query to do a search on feeds which has the Title that matches QueryText. With this we are ready to run the app. Run the App. Hit the Charms Menu with Windows + C key combination and type a text to search within the blog. You can see that it filters the Blogs which has the matching text. We can modify the above Linq query to do a search for the Text in other attributes like description, actual blog content etc., I have uploaded the complete code since the original WindowsBlogReader Code is not available for download. You can download it from here note: this code is provided as-is without any warranties. Cheers!!!

Read the article

SQL SERVER – Partition Parallelism Support in expressor 3.6

- by pinaldave

I am very excited to learn that there is a new version of expressor’s data integration platform coming out in March of this year. It will be version 3.6, and I look forward to using it and telling everyone about it. Let me describe a little bit more about what will be so great in expressor 3.6: Greatly enhanced user interface Parallel Processing Bulk Artifact Upgrading The User Interface First let me cover the most obvious enhancements. The expressor Studio user interface (UI) has had some significant work done. Kudos to the expressor Engineering team; the entire UI is a visual masterpiece that is very responsive and intuitive. The improvements are more than just eye candy; they provide significant productivity gains when developing expressor Dataflows. Operator shape icons now include a description that identifies the function of each operator, instead of having to guess at the function by the icon. Operator shapes and highlighting depict the current function and status: Disabled, enabled, complete, incomplete, and error. Each status displays an appropriate message in the message panel with correction suggestions. Floating or docking property panels provide descriptive tool tips for each property as well as auto resize when adjusting the canvas, without having to search Help or the need to scroll around to get access to the property. Progress and status indicators let you know when an operation is working. “No limit” canvas with snap-to-grid allows automatic sizing and accurate positioning when you have numerous operators in the Dataflow. The inline tool bar offers quick access to pan, zoom, fit and overview functions. Selecting multiple artifacts with a right click context allows you to easily manage your workspace more efficiently. Partitioning and Parallel Processing Partitioning allows each operator to process multiple subsets of records in parallel as opposed to processing all records that flow through that operator in a single sequential set. This capability allows the user to configure the expressor Dataflow to run in a way that most efficiently utilizes the resources of the hardware where the Dataflow is running. Partitions can exist in most individual operators. Using partitions increases the speed of an expressor data integration application, therefore improving performance and load times. With the expressor 3.6 Enterprise Edition, expressor simplifies enabling parallel processing by adding intuitive partition settings that are easy to configure. Bulk Artifact Upgrading Bulk Artifact Upgrading sounds a bit intimidating, but it actually is not and it is a welcome addition to expressor Studio. In past releases, users were prompted to confirm that they wanted to upgrade their individual artifacts only when opened. This was a cumbersome and repetitive process. Now with bulk artifact upgrading, a user can easily select what artifact or group of artifacts to upgrade all at once. As you can see, there are many new features and upgrade options that will prove to make expressor Studio quicker and more efficient. I hope I’m not the only one who is excited about all these new upgrades, and that I you try expressor and share your experience with me. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

Read the article

Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

[Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

Read the article

Using the latest (stable release) of Oracle Developer Tools for Visual Studio 11.1.0.7.20.

- by mbcrump

+ = Simple and safe Data connections. This guide is for someone wanting to use the latest ODP.NET quickly without reading the official documentation. This guide will get you up and running in about 15 minutes. I have reviewed my referral link to my simple Setting up ODP.net with Win7 x64 and noticed most people were searching for one of the following terms: “how to use odp.net with vs” “setup connection odp.net” “query db using odp and vs” While my article provided links and a sample tnsnames.ora file, it really didn’t tell you how to use it. I’m hoping that this brief tutorial will help. So before we get started, you will need the following: Download the following: www.oracle.com/technology/software/tech/dotnet/utilsoft.html from oracle and install it. It is the first one on the page. Visual Studio 2008 or 2010. It should be noted that The System.Data.OracleClient namespace is the OLD .NET Framework Data Provider for Oracle. It should not be used anymore as it has been depreciated. The latest version which is what we are using is Oracle.DataAccess.Client. First things first, Add a reference to the Oracle.DataAccess.Client after you install ODP.NET Copy and paste the following C# code into your project and replace the relevant info including the query string and you should be able to return data. I have commented several lines of code to assist in understanding what it is doing. Lambda Expression. using System; using System.Data; using Oracle.DataAccess.Client; namespace ConsoleApplication1 { class Program { static void Main(string[] args) { try { //Setup DataSource string oradb = "Data Source=(DESCRIPTION =" + "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = 1521)))" + "(CONNECT_DATA = (SERVICE_NAME = SERVICENAME))) ;" + "Persist Security Info=True;User ID=USER;Password=PASSWORD;"; //Open Connection to Oracle - this could be moved outside the try. OracleConnection conn = new OracleConnection(oradb); conn.Open(); //Create cmd and use parameters to prevent SQL injection attacks. OracleCommand cmd = new OracleCommand(); cmd.Connection = conn; cmd.CommandText = "select username from table where username = :username"; OracleParameter p1 = new OracleParameter("username", OracleDbType.Varchar2); p1.Value = username; cmd.Parameters.Add(p1); cmd.CommandType = CommandType.Text; OracleDataReader dr = cmd.ExecuteReader(); dr.Read(); //Contains the value of the datarow Console.WriteLine(dr["username"].ToString()); //Disposes of objects. dr.Dispose(); cmd.Dispose(); conn.Dispose(); } catch (OracleException ex) // Catches only Oracle errors { switch (ex.Number) { case 1: Console.WriteLine("Error attempting to insert duplicate data."); break; case 12545: Console.WriteLine("The database is unavailable."); break; default: Console.WriteLine(ex.Message.ToString()); break; } } catch (Exception ex) // Catches any error not previously caught { Console.WriteLine("Unidentified Error: " + ex.Message.ToString()); } } } } At this point, you should have a working Program that returns data from an oracle database. If you are still having trouble then drop me a line and I will be happy to assist. As of this writing, oracle has announced the latest beta release of ODP.NET 11.2.0.1.1 Beta. This release includes .NET Framework 4 and .NET Framework 4 Client Profile support. You may want to hold off on this version for a while as its BETA, and I wouldn’t want any production code using any BETA software.

Read the article

MEB: Taking Incremental Backup using last successful backup

- by Sagar Jauhari

Introduction In MySQL Enterprise Backup v3.7.0 (MEB 3.7.0) a new option '–incremental-base' was introduced. Using this option a user can take in incremental backup without specifying the '–start-lsn' option. Description of this option can be found here. Instead of '–start-lsn' the user can provide the location of the last full backup or incremental backup using the 'dir:' prefix. MEB would extract the end LSN of this backup from the mysql.backup_history table as well as the backup_variables.txt file (for verification) to use it as the start LSN of the incremental backup. Because of popular demand, in MEB 3.7.1 the option '-incremental-base' has been extended further. The idea is to allow the user to take an incremental backup as easily as possible using the '–incremental-base' option. With the new option MEB queries the backup_history table for the last successful backup and uses its end LSN as the start LSN for the new incremental backup. It should be noted that the last successful backup is used irrespective of the location of the backup. Details A new prefix 'history:' has been introduced for the –incremental-base option and currently the only permissible value is the string "last_backup". So using the new option an incremental backup can be taken with the following command: $ mysqlbackup --incremental --incremental-backup-dir=/media/mysqlbackup-repo/ --incremental-base=history:last_backup backup When MEB attempts to extract the end LSN of the last successful backup from the mysql.backup_history table, it also scans the corresponding backup destination for the old backup and tries to read the meta files at this backup destination. If a valid backup still exists at the backup destination and the meta files can be read, MEB compares the end LSN found in the mysql.backup_history table with the end LSN found in the backup meta files of the old backup. Assuming that the host MySQL server is alive and mysql.backup_history can be accessed by MEB, the behaviour of MEB with respect to verification of the old end LSN can be summarized as follows: If 'BD' is the backup destination of the last successful backup in mysql.backup_history table and 'BHT' is the mysql.backup_history table if can_read_files_at_BD: if end_lsn_found_at_BD == end_lsn_of_last_backup_in_BHT: continue_with_backup() else return_with_error() else continue_with_backup() Advantages Apart from ease of usability an important advantage of this option is that the user can do repeated incremental backups without changing the command line. This is possible using the '–with-timestamp' option along with this new option. For example, the following command $ mysqlbackup --with-timestamp --incremental --incremental-backup-dir=/media/mysqlbackup-repo/ --incremental-base=history:last_backup backup can be used to perform successive incremental backups in the directory /media/mysqlbackup-repo . Limitations The option '--incremental-base=history:last_backup' should not be used when the user takes different kinds of concurrent backups on the same MySQL server (say different partial backups at multiple locations). should not be used after any temporary or experimental backups performed on the server (which where successful!). needs to be used with precaution since any intermediate successful backup without the –no-connection will be used as the base backup for the next incremental backup. will give an error in case a valid backup exists at the location of the last successful backup and whose end LSN is different from that of the last successful backup found in the backup_history table. Date: 2012-06-19 HTML generated by org-mode 6.33x in emacs 23

Read the article

Automated SSRS deployment with the RS utility

- by Stacy Vicknair

If you’re familiar with SSRS and development you are probably aware of the SSRS web services. The RS utility is a tool that comes with SSRS that allows for scripts to be executed against against the SSRS web service without needing to create an application to consume the service. One of the better benefits of using this format rather than writing an application is that the script can be modified by others who might be involved in the creation and addition of scripts or management of the SSRS environment. Reporting Services Scripter Jasper Smith from http://www.sqldbatips.com created Reporting Services Scripter to assist with the created of a batch process to deploy an entire SSRS environment. The helper scripts below were created through the modification of his generated scripts. Why not just use this tool? You certainly can. For me, the volume of scripts generated seems less maintainable than just using some common methods extracted from these scripts and creating a deployment in a single script file. I would, however, recommend this as a product if you do not think that your environment will change drastically or if you do not need to deploy with a higher level of control over the deployment. If you just need to replicate, this tool works great. Executing with RS.exe Executing a script against rs.exe is fairly simple. The Script Half the battle is having a starting point. For the scripting I needed to do the below is the starter script. A few notes: This script assumes integrated security. This script assumes your reports have one data source each. Both of the above are just what made sense for my scenario and are definitely modifiable to accommodate your needs. If you are unsure how to change the scripts to your needs, I recommend Reporting Services Scripter to help you understand how the differences. The script has three main methods: CreateFolder, CreateDataSource and CreateReport. Scripting the server deployment is just a process of recreating all of the elements that you need through calls to these methods. If there are additional elements that you need to deploy that aren’t covered by these methods, again I suggest using Reporting Services Scripter to get the code you would need, convert it to a repeatable method and add it to this script! Public Sub Main() CreateFolder("/", "Data Sources") CreateFolder("/", "My Reports") CreateDataSource("/Data Sources", "myDataSource", _ "Data Source=server\instance;Initial Catalog=myDatabase") CreateReport("/My Reports", _ "MyReport", _ "C:\myreport.rdl", _ True, _ "/Data Sources", _ "myDataSource") End Sub Public Sub CreateFolder(parent As String, name As String) Dim fullpath As String = GetFullPath(parent, name) Try RS.CreateFolder(name, parent, GetCommonProperties()) Console.WriteLine("Folder created: {0}", name) Catch e As SoapException If e.Detail.Item("ErrorCode").InnerText = "rsItemAlreadyExists" Then Console.WriteLine("Folder {0} already exists and cannot be overwritten", fullpath) Else Console.WriteLine("Error : " + e.Detail.Item("ErrorCode").InnerText + " (" + e.Detail.Item("Message").InnerText + ")") End If End Try End Sub Public Sub CreateDataSource(parent As String, name As String, connectionString As String) Try RS.CreateDataSource(name, parent,False, GetDataSourceDefinition(connectionString), GetCommonProperties()) Console.WriteLine("DataSource {0} created successfully", name) Catch e As SoapException Console.WriteLine("Error : " + e.Detail.Item("ErrorCode").InnerText + " (" + e.Detail.Item("Message").InnerText + ")") End Try End Sub Public Sub CreateReport(parent As String, name As String, location As String, overwrite As Boolean, dataSourcePath As String, dataSourceName As String) Dim reportContents As Byte() = Nothing Dim warnings As Warning() = Nothing Dim fullpath As String = GetFullPath(parent, name) 'Read RDL definition from disk Try Dim stream As FileStream = File.OpenRead(location) reportContents = New [Byte](stream.Length-1) {} stream.Read(reportContents, 0, CInt(stream.Length)) stream.Close() warnings = RS.CreateReport(name, parent, overwrite, reportContents, GetCommonProperties()) If Not (warnings Is Nothing) Then Dim warning As Warning For Each warning In warnings Console.WriteLine(Warning.Message) Next warning Else Console.WriteLine("Report: {0} published successfully with no warnings", name) End If 'Set report DataSource references Dim dataSources(0) As DataSource Dim dsr0 As New DataSourceReference dsr0.Reference = dataSourcePath Dim ds0 As New DataSource ds0.Item = CType(dsr0, DataSourceDefinitionOrReference) ds0.Name=dataSourceName dataSources(0) = ds0 RS.SetItemDataSources(fullpath, dataSources) Console.Writeline("Report DataSources set successfully") Catch e As IOException Console.WriteLine(e.Message) Catch e As SoapException Console.WriteLine("Error : " + e.Detail.Item("ErrorCode").InnerText + " (" + e.Detail.Item("Message").InnerText + ")") End Try End Sub Public Function GetCommonProperties() As [Property]() 'Common CatalogItem properties Dim descprop As New [Property] descprop.Name = "Description" descprop.Value = "" Dim hiddenprop As New [Property] hiddenprop.Name = "Hidden" hiddenprop.Value = "False" Dim props(1) As [Property] props(0) = descprop props(1) = hiddenprop Return props End Function Public Function GetDataSourceDefinition(connectionString as String) Dim definition As New DataSourceDefinition definition.CredentialRetrieval = CredentialRetrievalEnum.Integrated definition.ConnectString = connectionString definition.Enabled = True definition.EnabledSpecified = True definition.Extension = "SQL" definition.ImpersonateUser = False definition.ImpersonateUserSpecified = True definition.Prompt = "Enter a user name and password to access the data source:" definition.WindowsCredentials = False definition.OriginalConnectStringExpressionBased = False definition.UseOriginalConnectString = False Return definition End Function Private Function GetFullPath(parent As String, name As String) As String If parent = "/" Then Return parent + name Else Return parent + "/" + name End If End Function

Read the article

SQL SERVER – How to Roll Back SQL Server Database Changes

- by Pinal Dave

In a perfect scenario, no unexpected and unplanned changes occur. There are no unpleasant surprises, no inadvertent changes. However, even with all precautions and testing, there is sometimes a need to revert a structure or data change. One of the methods that can be used in this situation is to use an older database backup that has the records or database object structure you want to revert to. For this method, you have to have the adequate full database backup and a tool that will help you with comparison and synchronization is preferred. In this article, we will focus on another method: rolling back the changes. This can be done by using: An option in SQL Server Management Studio T-SQL, or ApexSQL Log The first two solutions have been described in this article The disadvantages of these methods are that you have to know when exactly the change you want to revert happened and that all transactions on the database executed in a specific time range are rolled back – the ones you want to undo and the ones you don’t. How to easily roll back SQL Server database changes using ApexSQL Log? The biggest challenge is to roll back just specific changes, not all changes that happened in a specific time range. While SQL Server Management Studio option and T-SQL read and roll forward all transactions in the transaction log files, I will show you a solution that finds and scripts only the specific changes that match your criteria. Therefore, you don’t need to worry about all other database changes that you don’t want to roll back. ApexSQL Log is a SQL Server disaster recovery tool that reads transaction logs and provides a wide range of filters that enable you to easily rollback only specific data changes. First, connect to the online database where you want to roll back the changes. Once you select the database, ApexSQL Log will show its recovery model. Note that changes can be rolled back even for a database in the Simple recovery model, when no database and transaction log backups are available. However, ApexSQL Log achieves best results when the database is in the Full recovery model and you have a chain of subsequent transaction log backups, back to the moment when the change occurred. In this example, we will use only the online transaction log. In the next step, use filters to read only the transactions that happened in a specific time range. To remove noise, it’s recommended to use as many filters as possible. Besides filtering by the time of the transaction, ApexSQL Log can filter by the operation type: Table name: As well as transaction state (committed, aborted, running, and unknown), name of the user who committed the change, specific field values, server process IDs, and transaction description. You can select only the tables affected by the changes you want to roll back. However, if you’re not certain which tables were affected, you can leave them all selected and once the results are shown in the main grid, analyze them to find the ones you to roll back. When you set the filters, you can select how to present the results. ApexSQL Log can automatically create undo or redo scripts, export the transactions into an XML, HTML, CSV, SQL, or SQL Bulk file, and create a batch file that you can use for unattended transaction log reading. In this example, I will open the results in the grid, as I want to analyze them before rolling back the transactions. The results contain information about the transaction, as well as who and when made it. For UPDATEs, ApexSQL Log shows both old and new values, so you can easily see what has happened. To create an UNDO script that rolls back the changes, select the transactions you want to roll back and click Create undo script in the menu. For the DELETE statement selected in the screenshot above, the undo script is: INSERT INTO [Sales].[PersonCreditCard] ([BusinessEntityID], [CreditCardID], [ModifiedDate]) VALUES (297, 8010, '20050901 00:00:00.000') When it comes to rolling back database changes, ApexSQL Log has a big advantage, as it rolls back only specific transactions, while leaving all other transactions that occurred at the same time range intact. That makes ApexSQL Log a good solution for rolling back inadvertent data and schema changes on your SQL Server databases. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: ApexSQL

Read the article

Who owns the IP rights of the software without written employment contract? Employer or employee? [closed]

- by P T

I am a software engineer who got an idea, and developed alone an integrated ERP software solution over the past 2 years. I got the idea and coded much of the software in my personal time, utilizing my own resources, but also as intern/employee at small wholesale retailer (company A). I had a verbal agreement with the company that I could keep the IP rights to the code and the company would have the "shop rights" to use "a copy" of the software without restrictions. Part of this agreement was that I was heavily underpaid to keep the rights. Recently things started to take a down turn in the company A as the company grew fairly large and new head management was formed, also new partners were brought in. The original owners distanced themselves from the business, and the new "greedy" group indicated that they want to claim the IP rights to my software, offering me a contract that would split the IP ownership into 50% co-ownership, completely disregarding the initial verbal agreements. As of now there was no single written job description and agreement/contract/policy that I signed with the company A, I signed only I-9 and W-4 forms. I now have an opportunity to leave the company A and form a new business with 2 partners (Company B), obviously using the software as the primary tool. There would be no direct conflict of interest as the company A sells wholesale goods. My core question is: "Who owns the code without contract? Me or the company A? (in FL, US)" Detailed questions: I am familiar with the "shop rights", I don't have any problem leaving a copy of the code in the company for them to use/enhance to run their wholesale business. What worries me, Can the company A make any legal claims to the software/code/IP and potential derived profits/interests after I leave and form a company B? Can applying for a copyright of the code at http://www.copyright.gov in my name prevent any legal disputes in the future? Can I use it as evidence for legal defense? Could adding a note specifying the company A as exclusive license holder clarify the arrangements? If I leave and the company A sues me, what evidence would they use against me? On what basis would the sue since their business is in completely different industry than software (wholesale goods). Every single source file was created/stored on my personal computer with proper documentation including a copyright notice with my credentials (name/email/addres/phone). It's also worth noting that I develop significant part of the software prior to my involvement with the company A as student. If I am forced to sign a contract and the company A doesn't honor the verbal agreement, making claims towards the ownership, what can I do settle the matter legally? I like to avoid legal process altogether as my budget for court battles is extremely limited at the moment. Would altering the code beyond recognition and using it for the company B prevent the company A make any copyright claims? My common sense tells me that what I developed is by default mine in terms of IP, unless there is a signed legal agreement stating otherwise. But looking online it may be completely backwards, this really worries me. I understand that this is not legal advice, and I know to get the ultimate answer I need to hire a lawyer. I am only hoping to get some valuable input/experience/advice/opinion from those who were in similar situation or are familiar with the topic. Thank you, PT

Read the article

Oracle Social Network Developer Challenge: Fishbowl Solutions

- by Kellsey Ruppel

Originally posted by Jake Kuramoto on The Apps Lab blog. Today, I give you the final entry in the Oracle Social Network Developer Challenge, held last week during OpenWorld. This one comes from Friend of the ‘Lab and Fishbowl Solutions (@fishbowle20) hacker, John Sim (@jrsim_uix), whom you might remember from his XBox Kinect demo at COLLABORATE 12 (presentation slides and abstract) hacks and other exploits with WebCenter. We put this challenge together specifically for developers like John, who like to experiment with new tools and push the envelope of what’s possible and build cool things, and as you can see from his entry John did just that, mashing together Google Maps and Oracle Social Network into a mobile app built with PhoneGap that uses the device’s camera and GPS to keep teams on the move in touch. He calls it a Mobile GeoTagging Solution, but I think Avengers Assemble! would have equally descriptive, given that was obviously his inspiration. Here’s his description of the mobile app: My proposed solution was to design and simplify GeoLocation mapping, and automate updates for users and teams on the move; who don’t have access to a laptop or want to take their ipads out – but allow them to make quick updates to OSN and upload photos taken from their mobile device – there and then. As part of this; the plan was to include a rules engine that could be configured by the user to allow the device to automatically update and post messages when they arrived at a set location(s). Inspiration for this came from on{x} – automate your life. Unfortunately, John didn’t make it to the conference to show off his hard work in person, but luckily, he had a colleague from Fishbowl and a video to showcase his work. Here are some shots of John’s mobile app for your viewing pleasure: John’s thinking is sound. Geolocation is usually relegated to consumer use cases, thanks to services like foursquare, but distributed teams working on projects out in the world definitely need a way to stay in contact. Consider a construction job. Different contractors all converge on a single location, and time is money. Rather than calling or texting each other and risking a distracted driving accident, an app like John’s allows everyone on the job to see exactly where the other contractors are. Using his GPS rules, they could easily be notified about how close each is to the site, definitely useful when you have a flooring contractor sitting idle, waiting for an electrician to finish the wiring. The best part is that the project manager or general contractor could stay updated on all the action (or inaction) using Oracle Social Network, either sitting at a desk using the browser app or desktop client or on the go, using one of the native mobile apps built for Oracle Social Network. I can see this being used by insurance adjusters too, and really any team that, erm, assembles at a given spot. Of course, it’s also useful for meeting at the pub after the day’s work is done. Beyond people, this solution could also be implemented for physical objects that are in route to a destination. Say you’re a customer waiting on rail shipment or a package delivery. You could track your valuable’s whereabouts easily as they report their progress via checkins. If they deviated from the GPS rules, you’d be notified. You might even be able to get a picture into Oracle Social Network with some light hacking. Thanks to John and his colleagues at Fishbowl for participating in our challenge. We hope everyone had a good experience. Make sure to check out John’s blog post on his work and the experience using Oracle Social Network. Although this is the final, official entry we had, tomorrow, I’ll show you the work of someone who finished code, but wasn’t able to make the judging event. Stay tuned.

Read the article

Browser Specific Extensions of HttpClient

- by imran_ku07

Introduction: REpresentational State Transfer (REST) causing/leaving a great impact on service/API development because it offers a way to access a service without requiring any specific library by embracing HTTP and its features. ASP.NET Web API makes it very easy to quickly build RESTful HTTP services. These HTTP services can be consumed by a variety of clients including browsers, devices, machines, etc. With .NET Framework 4.5, we can use HttpClient class to consume/send/receive RESTful HTTP services(for .NET Framework 4.0, HttpClient class is shipped as part of ASP.NET Web API). The HttpClient class provides a bunch of helper methods(for example, DeleteAsync, PostAsync, GetStringAsync, etc.) to consume a HTTP service very easily. ASP.NET Web API added some more extension methods(for example, PutAsJsonAsync, PutAsXmlAsync, etc) into HttpClient class to further simplify the usage. In addition, HttpClient is also an ideal choice for writing integration test for a RESTful HTTP service. Since a browser is a main client of any RESTful API, it is also important to test the HTTP service on a variety of browsers. RESTful service embraces HTTP headers and different browsers send different HTTP headers. So, I have created a package that will add overloads(with an additional Browser parameter) for almost all the helper methods of HttpClient class. In this article, I will show you how to use this package. Description: Create/open your test project and install ImranB.SystemNetHttp.HttpClientExtensions NuGet package. Then, add this using statement on your class, using ImranB.SystemNetHttp; Then, you can start using any HttpClient helper method which include the additional Browser parameter. For example, var client = new HttpClient(myserver); var task = client.GetAsync("http://domain/myapi", Browser.Chrome); task.Wait(); var response = task.Result; . Here is the definition of Browser, public enum Browser { Firefox = 0, Chrome = 1, IE10 = 2, IE9 = 3, IE8 = 4, IE7 = 5, IE6 = 6, Safari = 7, Opera = 8, Maxthon = 9, } These extension methods will make it very easy to write browser specific integration test. It will also help HTTP service consumer to mimic the request sending behavior of a browser. This package source is available on github. So, you can grab the source and add some additional behavior on the top of these extensions. Summary: Testing a REST API is an important aspect of service development and today, testing with a browser is crucial. In this article, I showed how to write integration test that will mimic the browser request sending behavior. I also showed an example. Hopefully you will enjoy this article too.

Read the article

Abstraction, Politics, and Software Architecture

Abstraction can be defined as a general concept and/or idea that lack any concrete details. Throughout history this type of thinking has led to an array of new ideas and innovations as well as increased confusion and conspiracy. If one was to look back at our history they will see that abstraction has been used in various forms throughout our past. When I was growing up I do not know how many times I heard politicians say “Leave no child left behind” or “No child left behind” as a major part of their campaign rhetoric in regards to a stance on education. As you can see their slogan is a perfect example of abstraction because it only offers a very general concept about improving our education system but they do not mention how they would like to do it. If they did then they would be adding concrete details to their abstraction thus turning it in to an actual working plan as to how we as a society can help children succeed in school and in life, but then they would not be using abstraction. By now I sure you are thinking what does abstraction have to do with software architecture. You are valid in thinking this way, but abstraction is a wonderful tool used in information technology especially in the world of software architecture. Abstraction is one method of extracting the concepts of an idea so that it can be understood and discussed by others of varying technical abilities and backgrounds. One ways in which I tend to extract my architectural design thoughts is through the use of basic diagrams to convey an idea for a system or a new feature for an existing application. This allows me to generically model an architectural design through the use of views and Unified Markup Language (UML). UML is a standard method for creating a 4+1 Architectural View Models. The 4+1 Architectural View Model consists of 4 views typically created with UML as well as a general description of the concept that is being expressed by a model. The 4+1 Architectural View Model: Logical View: Models a system’s end-user functionality. Development View: Models a system as a collection of components and connectors to illustrate how it is intended to be developed. Process View: Models the interaction between system components and connectors as to indicate the activities of a system. Physical View: Models the placement of the collection of components and connectors of a system within a physical environment. Recently I had to use the concept of abstraction to express an idea for implementing a new security framework on an existing website. My concept would add session based management in order to properly secure and allow page access based on valid user credentials and last user activity. I created a basic Process View by using UML diagrams to communicate the basic process flow of my changes in the application so that all of the projects stakeholders would be able to understand my idea. Additionally I created a Logical View on a whiteboard while conveying the process workflow with a few stakeholders to show how end-user will be affected by the new framework and gaining additional input about the design. After my Logical and Process Views were accepted I then started on creating a more detailed Development View in order to map how the system will be built based on the concept of components and connections based on the previously defined interactions. I really did not need to create a Physical view for this idea because we were updating an existing system that was already deployed based on an existing Physical View. What do you think about the use of abstraction in the development of software architecture? Please let me know.

Read the article

Tyrus 1.8

- by Pavel Bucek

Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

Read the article

Stir Trek 2: Iron Man Edition

Next month (7 May 2010) Ill be presenting at the second annual Stir Trek event in Columbus, Ohio. Stir Trek (so named because last year its themes mixed MIX and the opening of the Star Trek movie) is a very cool local event. Its a lot of fun to present at and to attend, because of its unique venue: a movie theater. And whats more, the cost of admission includes a private showing of a new movie (this year: Iron Man 2). The sessions cover a variety of topics (not just Microsoft), similar to CodeMash. The event recently sold out, so Im not telling you all of this so that you can go and sign up (though I believe you can get on the waitlist still). Rather, this is pretty much just an excuse for me to talk about my session as a way to organize my thoughts. Im actually speaking on the same topic as I did last year, but the key difference is that last year the subject of my session was nowhere close to being released, and this year, its RTM (as of last week). Thats right, the topic is Whats New in ASP.NET 4 how did you guess? Whats New in ASP.NET 4 So, just what *is* new in ASP.NET 4? Hasnt Microsoft been spending all of their time on Silverlight and MVC the last few years? Well, actually, no. There are some pretty cool things that are now available out of the box in ASP.NET 4. Theres a nice summary of the new features on MSDN. Here is my super-brief summary: Extensible Output Caching use providers like distributed cache or file system cache Preload Web Applications IIS 7.5 only; avoid the startup tax for your site by preloading it. Permanent (301) Redirects are finally supported by the framework in one line of code, not two. Session State Compression Can speed up session access in a web farm environment. Test it to see. Web Forms Features several of which mirror ASP.NET MVC advantages (viewstate, control ids) Set Meta Keywords and Description easily Granular and inheritable control over ViewState Support for more recent browsers and devices Routing (introduced in 3.5 SP1) some new features and zero web.config changes required Client ID control makes client manipulation of DOM elements much simpler. Row Selection in Data Controls fixed (id based, not row index based) FormView and ListView enhancements (less markup, more CSS compliant) New QueryExtender control makes filtering data from other Data Source Controls easy More CSS and Accessibility support Reduction of Tables and more control over output for other template controls Dynamic Data enhancements More control templates Support for inheritance in the Data Model New Attributes ASP.NET Chart Control (learn more) Lots of IDE enhancements Web Deploy tool My session will cover many but not all of these features. Theres only an hour (3pm-4pm), and its right before the prize giveaway and movie showing, so Ill be moving quickly and most likely answering questions off-line via email after the talk. Hope to see you there! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Exalytics and Oracle Business Intelligence Enterprise Edition (OBIEE) Partner Workshop

- by mseika

Workshop Description Oracle Fusion Middleware 11g is the #1 application infrastructure foundation. It enables enterprises to create and run agile and intelligent business applications and maximize IT efficiency by exploiting modern hardware and software architectures. Oracle Exalytics Business Intelligence Machine is the world’s first engineered system specifically designed to deliver high performance analysis, modeling and planning. Built using industry-standard hardware, market-leading business intelligence software and in-memory database technology, Oracle Exalytics is an optimized system that delivers unmatched speed, visualizations and scalability for Business Intelligence and Enterprise Performance Management applications. This FREE hands-on, partner workshop highlights both the hardware and software components that are engineered to work together to deliver Oracle Exalytics - an optimized version of the industry-leading Oracle TimesTen In-Memory Database with analytic extensions, a highly scalable Oracle server designed specifically for in-memory business intelligence, and Oracle’s proven Business Intelligence Foundation with enhanced visualization capabilities and performance optimizations. This workshop will provide hands-on experience with Oracle's latest engineered system. Topics covered will include TimesTen In-Memory Database and the new Summary Advisor for Exalytics, the technical details (including mobile features) of the latest release of visualization enhancements for OBI-EE, and technical updates on Essbase. After taking this course, you will be well prepared to architect, build, demo, and implement an end-to-end Exalytics solution. You will also be able to extend your current analytical and enterprise performance management application implementations with numerous Oracle technologies specifically enhanced to take advantage of the compute capacity and in-memory capabilities of Oracle Exalytics.If you are a BI or Data Warehouse Architect, developer or consultant, you don’t want to miss this 3-day workshop. Register Now! Presentations Exalytics Architectural Overview Upgrade and Lifecycle Management Times Ten for Exalytics Summary Advisor Utility Essbase and EPM System on Exalytics Dashboard and Analysis Interactions OBIEE 11.1.1.6 Features and Advanced Topics Lab OutlineThe labs showcase Oracle Exalytics core components and functionality and provide expertise of Oracle Business Intelligence 11.1.1.6 new features and updates from prior releases. The hands-on activities are based on an Oracle VirtualBox image with software and training samples pre-installed. Lab Environment Setup Creating and Working with Oracle TimesTen In-Memory Database Running Summary Advisor Utility Working with Exalytics Visualization Features – Dashboard and Analysis Interactions Audience Oracle Partners BI and EPM Application Developers and Implementers System Integrators and Solution Consultants Data Warehouse Developers Enterprise Architects Prerequisites Experience and understanding of OBIEE 11g is required Previous attendance of Oracle Business Intelligence Foundation Suite Workshop or BIEE 11gIntroduction Workshop is highly recommended Good understanding of data warehousing and data modeling for reporting and analysis purpose Strong experience with database technologies preferred Equipment RequirementsThis workshop requires attendees to provide their own laptops for this class.Attendee laptops must meet the following minimum hardware/software requirements: Hardware Minimum 8GB RAM 60 GB free space (includes staging) USB 2.0 port (at least one available) It is strongly recommended that you bring a mouse. You will be working in a development environment and using the mouse heavily. Software One of the following operating systems: 64-bit Windows host/laptop OS 64-bit host/laptop OS with a Windows VM (XP, Server, or Win 7, BIC2g, etc.) Internet Explorer 7.x/8.x or Firefox 3.5.x WINRAR or 7ziputility to unzip workshop files: Download-able from http://www.win-rar.com/download.html Download-able from http://www.7zip.com/ Oracle VirtualBox 4.0.2 or higher Downloadable from http://www.virtualbox.org/wiki/Downloads CPU virtualization mode needs to be enabled. We will provide guidance on the day of the workshop. Attendees will be given a VirtualBox image containing a pre-installed Oracle Exalytics environment. Schedule This workshop is 3 days. - Times vary by country!9:00am: Sign-in and technical setup 9:30am: Workshop starts 5:00pm: Workshop ends Oracle Exalytics and Business Intelligence (OBIEE) Workshop December 11-13, 2012: Oracle BVP, Birmingham, UK Register Here. Questions? Send email to: [email protected] Oracle Platform Technologies Enablement Services

Search Results

Search found 11509 results on 461 pages for 'description logic'.

Page 392/461 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399 | Next Page >

- by Alix Axel

- by Dinesh Asanka

- by Pinal Dave

- by imran_ku07

- by Andy Morrison

- by JKenderdine

- by Dave Campbell

- by Brian

- by brian_ritchie

- by kdavis8

- by lukasz.romaszewski(at)oracle.com

- by Harish Ranganathan

- by pinaldave

- by mbcrump

- by Sagar Jauhari

- by Stacy Vicknair

- by Pinal Dave

- by P T

- by Kellsey Ruppel

- by imran_ku07

- by Pavel Bucek

- by mseika

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399 | Next Page >