Search Results

Search found 10731 results on 430 pages for 'k day'.

Page 392/430 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

  • What presentation software suits my needs?

    - by claws
    Background: I'm teaching biology to 12th grade students. The syllabus I'm teaching is huge. I mean literally, very huge. There is a lot for students to remember. There are no less than 1000 facts (weird names, dates etc) for students to remember. They'll have to remember all of them, they don't have a choice. The notes I compiled for their learning itself is upto 80 printed pages(Just the bullet outline & facts). That's just one chapter. We have 34 chapters. Also my students are very hardworking, they study upto 8-10hrs per day (Yeah! we are from India :). So, I want to ensure maximum retaining by the students at each and every stage (Teaching & Learning). I'm trying to as many memory training techniques as possible. I'm trying to incorporate, mnemonics, strong visual aids (pictures, 3D-animations, real videos etc.), spaced repetition etc. I think MS powerpoint is not suitable for my needs: There are about 200 slides per chapter. Its very easy for students to get lost while teaching. Because the problem with powerpoint is that it gives facts (as bullets) but it doesn't exploit the association & organization (Concept Map) of the content, which helps students learn quickly. I found an amazing software called XMind. You can see the screenshot here. Problem is that it is not as powerpoint in terms of powerpoint. This software can be used for just for concept maps. In the above screenshot, each topic occupies a single slide. I have an Image/picture(Detailed huge picture) and about 5-10 bullet points and probably a video or an animation of somethings. And this XMind is not good at presenting, in terms that it doesn't allow me to set what to present after what. I want to present a top down view, with a slide for each topic. PS: I Don't like prezi.com. I tried but it simply is too confusing for my students. It zooms here and there. I didn't tried it but I've seen few presentations.

    Read the article

  • Problems with Windows XP Plug and Play devices, maybe relating to MSVCR71.dll

    - by Richard
    I believe this question is unanswered as of now so I appologize if I've overlooked it. I have been having trouble some external devices with windows recently and I'm trying my darnedest to get to the bottom of it. At first, my Zero Tension USB mouse would stop working...as in the laser in the bottom of it would be on and would register movement, but the mouse on the screen wouldn't budge even an inch. At first this would happen randomly and then it would correct itself. As time went on, it became more and more frequent. At some point, the computer would make the "doo doo" sound of plugging or unplugging a USB device when the mouse stopped/started working. I dealt with it for a while and usually if I rebooted my machine, the mouse would work again for a day or two. As more time has gone on, the computer fully does not recognize the mouse AT ALL...I have another mouse that I use with the computer that works just fine and cannot seem to figure out why my Zero Tension mouse has failed. I tried plugging the Zero Tension mouse into my Mac and low and behold, it works without hesitation and never stops on me... Needless to say, I am stumped about this. I figured because I had another mouse I could deal with the loss of my fancy one for now...until my speakers stopped being recognized. I have a set of Logitec speakers that I have plugged into my sound card. Again, every now and again the audio devices would cease to be recognized by my computer, but a reboot would fix the problem. Now my speakers do not work at all with my computer and I feel like it's time to ask for help. My computer seems to be having a neural shutdown...where I can plug in devices and the computer doesn't seem to notice anything wrong, but none of the devices work. I hope this doesn't get any worse! Please help! Also, on a potentially (un)related note, when I start up my machine I get the message "This application has failed to start because Msvcp71.dll was not found. Re-installing the application may fix this problem." in reference to qbupdate.exe I don't know if that DLL being messed up has anything to do with my mouse or speakers, but I figure it might...anyway, thanks in advance for an answer and let me know if I need to clarify anything. Let me sum up: Zero Tension Mouse gradually stopped working Logitec Speakers gradually stopped working MSVCR71.dll seems to be messed up I don't know if any of those are related but any help would be much appreciated

    Read the article

  • Laptop turning off when fan is spinning hard

    - by Ieyasu Sawada
    My laptop seems to have reach its lifespan. Its an Acer laptop so I guess that's normal. But I'd like to hear your opinions about this. My laptop is only 2 years old. I haven't heard the fan spinning like crazy not until these past 5 months. What I did: Hoping that its just the applications that I have installed that's consume the life of my laptop from the background. I used PC Decrapifier to uninstall some of the things that I don't need. Reformatted my computer but only the primary partition since my files are on the second partition. Bought a cooling pad. None of these works. I noticed the fan spins so hard when: I have a lot of browser tabs open. Full screen mode a flash video that I'm viewing online. Using VLC to watch encoded videos. There's this thing called minicoder http://sourceforge.net/projects/minicoder/ to reduce the size of videos without affecting much of the quality. I'm suspecting that it needs additional software(to make life easier for the hardware) even though the video is working fine in VLC. VLC consumes about 300,000K and above(as seen from task manager) while watching videos (.mkv). The problem: Laptop suddenly turns off when the fan spins like crazy for about 20 minutes. I'm always checking to see if its already too hot(using my fingers to feel the side of the laptop) but its not so I continued watching and then poof! computer turns off. Laptop won't turn on immediately when I turn it on after it turning off by itself. The light for the power goes on but its turns off immediately. I have to wait for about 10-20 seconds before it boots up without problems. So how do I go about this? Is this just normal for Acer laptops after about 2 years of heavy usage (8-12 hours a day)? My usage is heavy but I normally only have a text-editor(sublime) and browser open(chrome). Here's what I got from HW monitor:

    Read the article

  • DCHP and Router load testing

    - by John H
    I manage a campground wifi network with an average of 10 - 60 active users. I have encountered issues where the router starts acting flaky (failing to assign DHCP or failing to pass traffic) without any clear warning (low cpu utilization, etc). I upgraded the router a couple times and ended up with a Netgear ProSafe VPN router that seems to be handling the traffic. The interesting thing is that the Netgear has lower specs than the Buffalo router it replaced, indicating the issue is with the DD-WRT firmware. While I'll be pursuing this issue on the dd-wrt forums, I need a way to test routers. My vision is having 1-2 computers connected on the LAN side and 1-2 computers connected on the WAN side. I want the LAN computers to be generating various type of traffic and connections, as well as requesting DCHP addresses. A few notes: The wireless aspect should be a non-issue. Most clients would connect to a wireless bridge and come into the router through a network cable. I had a monitoring server with Nagios running check_dhcp against the router. This server was connected directly by a network cable, eliminating wifi bridges and other devices from the equation. This question is somewhat related, but not exactly: Load testing wireless LANs I am going to look at IxChariot. While I'd ideally like to use a 1 computer on each side running Linux and preferably free software, I can entertain running Windows, multiple computers, or non-free software. Total bandwidth doesn't seem to be the issue. I can transfer large files all day. Even on the busiest days, the users seemed to only pull ~5Mbps. There is very little "LAN to LAN traffic" and most of it might never have reached the main router. The issue I need to test for seems to be tied to active users, or more appropriately, active sessions. I know active users or active clients is a meaningless term from a router standpoint and wouldn't mind having more appropriate terms to use. Summary: I need a way to test a routers ability in handling traffic from a large number of clients. My current strategy is to purchase a router, deploy it, and see how it fails in the live environment.

    Read the article

  • Backing up data stored on Amazon S3

    - by Fiver
    I have an EC2 instance running a web server that stores users' uploaded files to S3. The files are written once and never change, but are retrieved occasionally by the users. We will likely accumulate somewhere around 200-500GB of data per year. We would like to ensure this data is safe, particularly from accidental deletions and would like to be able to restore files that were deleted regardless of the reason. I have read about the versioning feature for S3 buckets, but I cannot seem to find if recovery is possible for files with no modification history. See the AWS docs here on versioning: http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectVersioning.html In those examples, they don't show the scenario where data is uploaded, but never modified, and then deleted. Are files deleted in this scenario recoverable? Then, we thought we may just backup the S3 files to Glacier using object lifecycle management: http://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html But, it seems this will not work for us, as the file object is not copied to Glacier but moved to Glacier (more accurately it seems it is an object attribute that is changed, but anyway...). So it seems there is no direct way to backup S3 data, and transferring the data from S3 to local servers may be time-consuming and may incur significant transfer costs over time. Finally, we thought we would create a new bucket every month to serve as a monthly full backup, and copy the original bucket's data to the new one on Day 1. Then using something like duplicity (http://duplicity.nongnu.org/) we would synchronize the backup bucket every night. At the end of the month we would put the backup bucket's contents in Glacier storage, and create a new backup bucket using a new, current copy of the original bucket...and repeat this process. This seems like it would work and minimize the storage / transfer costs, but I'm not sure if duplicity allows bucket-to-bucket transfers directly without bringing data down to the controlling client first. So, I guess there are a couple questions here. First, does S3 versioning allow recovery of files that were never modified? Is there some way to "copy" files from S3 to Glacier that I have missed? Can duplicity or any other tool transfer files between S3 buckets directly to avoid transfer costs? Finally, am I way off the mark in my approach to backing up S3 data? Thanks in advance for any insight you could provide!

    Read the article

  • What is it that kills laptop batteries?

    - by Mala
    There are many superstitions on what you must never do lest your battery become worthless - and by worthless I mean hold about 16 - 24 seconds of charge. This has happened to every laptop I have ever owned, and I just got a new one, so please help me sort out fact from fiction. Here are some of the things I've heard: Do not keep your laptop fully charged. You must run it completely down every so often. Do not use your laptop plugged in to the wall. Only plug it in when it needs charge. If you will not be using your laptop for a long period of time, don't leave it at full charge. Do not leave your laptop running 24/7. The first two I know to be complete fiction: this was true of old batteries such as you might have had in an iPod in 2003, but modern batteries function better when kept at or near full charge. Devices even have circuitry to prevent you from completely depleting your battery, as this is dangerous. The third point sounds probable, and I'd be interested to know if it was true. However, it doesn't really apply to me because I'm not really the type to leave my laptop alone for a day, much less a "long period of time" The fourth seems most likely of the above, but only because of causality: I have always done this, and my batteries have always crapped out on me. I've generally treated a laptop like a desktop with a battery backup, and that I can move from one room to another if necessary. The fact that my batteries tend to last less than 30 seconds has further entrenched this behavior. Should I be trying to break this habit? Are there any other things that ruin laptop batteries? I love that I can actually use my new laptop unplugged :) I'd like to keep it that way. Update: Additional question: If the computer will be used for an extended period of time plugged in, does it make sense to remove the battery first? Update 2: I know people with laptops older than mine, who actively use their laptops as much as I do, and their batteries still hold about an hours' charge while mine holds less than 30 seconds, hence my belief that something I'm doing kills them.

    Read the article

  • Hell: NTFS "Restore previous versions"...

    - by ttsiodras
    The hell I have experienced these last 24h: Windows 7 installation hosed after bluetooth driver install. Attempting to recover using restore points via "Repair" on the bootable Win7 installation CD. Attempting to go back one day in the restore points. No joy. Attempting to go back two days in the restore points. No joy. Attempting to go back one week in the restore points. Stil no joy. Windows won't boot. Apparently something is REALLY hosed. And then it hits me - PANIC - the restore points somehow reverted DATA files to their older versions! Word, Powerpoint, SPSS, etc document versions are all one week old now. Using the "freshest" restore point. Failed to restore yesterday's restore point!!! I am stuck at old versions of the data!!! Booting KNOPPIX, mounting NTFS partition as read-only under KNOPPIX. Checking. Nope, the data files are still the one week old versions. Booting Win7 CD, Recovery console - Cmd prompt - navigating - yep, data files are still one week old. Removing the drive, mounting it under other Win7 installation. Still old data. Running NTFS undelete on the drive (read-only scan), searching for file created yesterday. Not found. Despair. At this point, idea: I will install a brand new Windows installation, keeping the old one in Windows.old (default behaviour of Windows installs). I boot the new install, I go to my C:\Data\ folder, I choose "Restore previous versions", click on yesterday's date, and click open... YES! It works! I can see the latest versions of my files (e.g. from yesterday). Thank God. And then, I try to view the files under the "yesterday snapshot-version" of c:\Users\MyAccount\Desktop ... And I get "Permission Denied" as soon as I try to open "Users\MyAccount". I make sure I am an administrator. No joy. Apparently, the new Windows installation does not have access to read the "NTFS snapshots" or "Volume Shadow Snapshots" of my old Windows account! Cross-installation permissions? I need to somehow tell the new Windows install that I am the same "old" user... So that I will be able to access the "Users\MyAccount" folder of the snapshot of my old user account. Help?

    Read the article

  • flashcache with mdadm and LVM

    - by Backtogeek
    I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

    Read the article

  • Cannot connect to WEBrick on home network

    - by Chris Stewart
    I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

    Read the article

  • Looking for app to work fluidly with CSV data in graph form

    - by Aszurom
    It often occurs to me that if I had a good tool for viewing CSV data in graphical format, and comparing two sets of numbers to each other, I could do a great deal of meaningful trend watching and data interpretation. For example, perfmon can output quite a lot of data about a server into a CSV file, but there's no good way to view it. A lot of scripts could/have been written that would populate CSV files. I could write these all day long. My problem is that I need a great viewer. I've seen quite a few things that will take a CSV file and after a lot of tweaking and user adjustment produce a static gif/png image. A static image doesn't do me a lot of good, because I have to look at it, then re-calibrate the parameters of the program, regenerate the image, repeat. That sucks. I could do this in Excel. Ideally, I would want a FLUID graph viewer. On the fly, I can adjust how much of my timeline I'm viewing. I could adjust the scaling so that one big spike doesn't make 99.9% of the data an unreadable line across the bottom of the X axis. Stuff like that. I should be able to say "show me CSV column 3 and column 5 as graphs. Show me the data scaled for 20 or 150 entries, and let me slide that window up and down the column of data. Auto scale to fit 95% of data within the Y axis and let crazy spikes go off the screen." Maybe I'm terribly spoiled by how you can drag, zoom, and slide data around on my iPad. I want to be able to view a spreadsheet of data with that fluidity and not have to guess at what sort of static snapshot I want to create from it. I don't want to have to make a study of how to tweak some data plotting program to let me import my file and do what I could just do in Excel. I want to scale, zoom, and transform my graph on the fly and then export a snapshot of it once I have it the way I want it. Is there anything out there that fills this need? I'll take linux, osx, win32 or even iOS suggestions.

    Read the article

  • long access times and errors in iis application

    - by Jens Olsson
    Hi, I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

    Read the article

  • inews failed: "No colon-space in "X-MS-TNEF-Correlator:"

    - by wolfgangsz
    We run a news server for our engineering teams, which is also linked to the code repositories (so that all engineers can subscribe to any changes in the repos or just the projects they are interested in). On quite a regular basis (several times a day) I (as the sysadmin for that server) receive bounces from innd with the above as the first line. The news server simply rejects these messages and the articles don't get posted. Here is an example: inews failed: inews: cannot send article to server: 441 437 No colon-space in "X-MS-TNEF-Correlator:" header inews: article not posted -------- Article Contents Path: aminocom.com!ctaylor From: [email protected] (Cameron Taylor) Newsgroups: amino.qa.reports Content-Language: en-US Content-Type: multipart/alternative; boundary="_000_A2AB95742ADD524795C13EDE8F8CCD201A798C0Eukswaex01_" MIME-Version: 1.0 Subject: [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** Message-ID: Date: Thu, 9 Sep 2010 16:15:16 +0000 X-Received: from uk-swa-ex02.aminocom.com (uk-swa-ex02.aminocom.com [10.171.3.10]) by theoline.aminocom.com (8.14.3/8.13.8) with ESMTP id o89GF8tx019494 for ; Thu, 9 Sep 2010 17:15:08 +0100 X-Received: from uk-swa-ex01.aminocom.com ([10.171.3.9]) by uk-swa-ex02 ([10.171.3.10]) with mapi; Thu, 9 Sep 2010 17:15:18 +0100 X-To: QA Reports X-Thread-Topic: [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** X-Thread-Index: ActQOjBdms0CSJsORNSxRIMSZ4H3Ow== X-Accept-Language: en-US, en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: X-Auto-Response-Suppress: DR, OOF, AutoReply --_000_A2AB95742ADD524795C13EDE8F8CCD201A798C0Eukswaex01_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable SQA Test Report [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** Status .... (rest of the message is not important) And yes, quite clearly this header doesn't have anything after the colon. The man page for innd doesn't specify why it rejects these messages, it just says it rejects them. So far I have found out these headers are linked to messages in RTF format (coming from Outlook clients), where normally the formatting information would be stored in a winmail.dat attachment. The clients all use MS Exchange 2010 servers to send their mail (identified above as uk-swa-ex02.aminocom.com) which forwards the message to the news server. Does anybody know what advice I need to give these users to avoid their articles getting bounced? Or can I change the behaviour of innd? Or do I need to filter these headers out before innd processes the articles?

    Read the article

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • Getting an boot error when starting computer

    - by Rob Avery IV
    I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

    Read the article

  • PHP hits 100% CPU and eats RAM at the same time Monday to Friday

    - by Daniel Samuels
    We run a learning platform for primary schools here in the UK and it's all been running extremely well. However at around 4PM Monday to Friday we see the same issue arise -- 1-2 PHP threads will spike to 100% CPU and gradually start eating up RAM until the server(s) fall over. 98%+ of our requests are HTTPS, these come into our Layer 7 load balancer which then decrypts the SSL data, adds the X-HTTP-Forwarded-For header and forwards the data onto an application server (we have 2 of those at the moment) on port 80. Our application servers have Varnish on port 80 which takes in the request from the load balancer and passes the request through to Nginx on port 81. Nginx then works out which 'vhost' it needs to use and passes any PHP processing through to PHP-CGI which is listening on a socket (managed through spawn-fcgi). There's an instance of Memcached running too, MySQL runs on a separate server / slave setup. Throughout the day the load will typically go no higher than 0.8 on either of the application servers, however at around 4PM our problem arises. I've managed to run strace on a few of the actual threads when they cause the problem and I always see the same thing: stat("/usr/share/zoneinfo/Europe/London", {st_mode=S_IFREG|0644,st_size=3661, ...}) = 0 stat("/usr/share/zoneinfo/Europe/London", {st_mode=S_IFREG|0644,st_size=3661, ...}) = 0 This is repeated infinitely and never stops until you SEGKILL the process or oomkiller kills it. There are no cron jobs scheduled to run at that time and I don't have any way of seeing exactly what Nginx request is associated with the PHP process which is running. We are running PHP 5.3.14 which we upgraded to from 5.3.8 last week to rule out the older version being the problem. This issue has been going on a few months now and we have no idea what is causing it. We deploy our software very frequently, so it's difficult to track down a specific release which may have started the problem - especially as we do not know the date of the first occurrence of this issue. Varnish is version 3.0.1, Nginx is 1.0.6 (which I understand is about a year old now), our servers are running CentOS release 5.7 (Final) they have Intel i3 540s at 3.07Ghz and 8GB of RAM. There's a discussion on the Debian mailing list about something very similar, you can find that here. Has anyone seen anything like this in the past, does anyone have any ideas or suggestions? Are there a way of linking an Nginx request directly to a PHP thread? Is there a better way of seeing what the PHP process is doing? (I've seen GDB mentioned, though I'll have to recompile PHP) Thanks!

    Read the article

  • Seeking past end of file causes Apache hang, and it never restarts.

    - by talkingnews
    I've actually solved my problem with a better script, but I'm still left wondering why Apache2 hung completely - this is an out-of-the-box ISPCONFIG 3.03 install, everything bang up to date, running perfectly. Until... The troublesome but innocent-looking script: $fp = fopen("/var/log/ispconfig/cron.log", "r"); fseek($fp, -5000, SEEK_END); $line_buffer = array(); while (!feof($fp)) { $line = fgets($fp, 1024); $line_buffer[] = $line; $line_buffer = array_slice($line_buffer, -10, 10); } foreach ($line_buffer as $line) { echo $line; } You get the idea, just a script I found on a forum somwehere. I did this for various logs, since it's a nice easy window on what's occurring (in a protect dir, of course!). One day, the logs having grown large an me having sorted all my cron, scripting and mail queue errors, I thought I was time to start afresh. updated, rebooted, archived and deleted the logs. When I ran my script a couple of hours later, it hung. And hung. 8 minutes I waited. Chrome timed the page out, of course, but the server never came back to life. htop showed /usr/sbin/apache2 -k restart using 100% CPU. Never came back until I did a service apache2 restart. Ran fine, as soon as I hit that logfile again...dead. So, I worked out it was the logfile script, and I worked out that seeking beyond the end of the file wasn't good, and I found a better script http://www.php.net/manual/en/function.fseek.php#90450 But what I'm left wondering is... why didn't something restart or kill the process? How was one hanging page able to bring down the whole server? It's running suphp. I say "out of the box", I've tweaked mysql and apache to fork and reserve sensible amounts of processes for the 512Mb RAM the VPS has, and it'll handle multiple refreshes of large pages, and hadn't hung before. Any ideas how I'd avoid this? Google isn't my friend in this instance beyond the reccs. above about number of processes vs RAM available.

    Read the article

  • Moving from VPS to Cloud

    - by GRIGORE-TURBODISEL
    ...and I have a few questions. I'm basically working on a MySQL+PHP based webapp. Since I don't have on-demand scaling with VPS, I'm planning to move from VPS to Cloud when I hit the 1000 subscribers barrier. I'm looking at Windows Azure but I'm ok with other suggestions. So here are my questions: Will it really cost me a kidney? Every subscriber needs to download around 4-5MB of static resources each day. Bandwidth is free on the VPS but here I see costs can easily get to $800.00/mo; this makes me very insecure about the whole thing, I mean VPS is just $2,000/yr. Do I need another VM or is PHP included in the Web Sites? I have basic sysadmin skills, I think I can handle setting up a PHP install, but will I have to do this? If yes, what other service do I need to setup manually? What about Memcached, MySQL, etc? What security protections does it include? For example I have some basic protection included, like directory traversals and executable files upload; I also have CloudFlare on my other websites for DDoS protection; will I need to do the same thing here too, can it even be installed, can I edit my DNS records, etc? How are e-mails, subdomains, add-on domains, parked domains, etc. handled? I haven't seen any references to e-mail boxes. On the VPS I simply add them from cPanel ([email protected] / whatever.mysite.com / ...); do I have a similar management interface here? Do I get SSH access? Or at least FTP, remote MySQL access and maybe some incremental back-ups or something? Can I see my quotas and advanced traffic info? I must mention that I really like the idea of the whole "cloud" concept, the added reliability and everything but I really need maybe a parallel to regular hosting or something so I know what to expect.

    Read the article

  • Windows 7 Home hangs at "Welcome" screen

    - by White Phoenix
    I'm asking on behalf of a friend who's currently having problems with his machine. Windows 7 Home 32-bit. He's too far away for me to help by going over to his house - I'm helping him over the Internet. This is his current machine: http://www.newegg.com/Product/Product.aspx?Item=N82E16883227134 The only two changes he made to that machine is to swap out the gfx card for a EVGA GTX 460 and the PSU for a Corsair TX650. Here's what happened: He was playing a computer game (fairly CPU/GPU intensive) and had some music going in the background in foobar while playing. Suddenly, he notices the music stopped playing, so he switches to foobar to try to close it, but it freezes up (window won't respond). So he figures it's just foobar having a bad day and force quits that program. Suddenly, his game won't respond, so he force quits that, then the entire computer just went to crap at that point, so he hits the restart button on his machine. Computer POSTS fine, but now he gets stuck at the Windows "welcome" screen (his account is set to auto-login). HD activity light is solid yellow but he doesn't hear HDD activity. He tried booting into Safe Mode - gets stuck at the "welcome screen". Tried a STartup Repair within Windows 7, it found a few problems, but still gets stuck at welcome. I advised him to boot off the DVD - sfc /scannow found nothing (couldn't use the regular /scannow option; says there's a repair pending, had to use use offbootdir/offwindir command switches). Ran startup repair 3 times - found nothing. My friend runs virus/malware scans on a regular basis, so he's fairly sure it's not that either. Right now I'm having my friend run chkdsk /R on the computer while in this Startup Recovery mode - so far it's caught a few bad sectors. However at this point I'm kinda wondering which way to go if chkdsk doesn't fix it. Quick Google search said someone had success by booting Windows with bootlogging on - some others have success with running the aforemented chkdsk, etc. The fact that Windows cannot even boot into Safe Mode concerns me. While we're waiting for chkdsk /R to finish, are there any other options I can give my friend short of reinstalling Windows 7? He has his data on a separate partition so that's not a major problem (though it'll be an annoyance for him). I suspect his hard drive may be having some issues, but my main concern is getting him back up and running before we start diagnosing the hard drive (I may have him run some sort of SMART test utility later).

    Read the article

  • Sarg report error

    - by amyassin
    I have a proxy server that runs Ubuntu Server 11.10, Squid 2.7.STABLE9. I installed sarg (version 2.3.1 Sep-18-2010) to generate reports using the ordinary apt-get install, and added a cron job to generate a report of the day every 5 minutes (that will overwrite the 5-minutes-older one): */5 * * * * /root/proxy_report.sh And the content of /root/proxy_report.sh is: #!/bin/bash /usr/bin/sarg -nd `date +"%d/%m/%Y"` > /dev/null 2>&1 And I added another cron job to generate a full report every hour at :32 (not to collide with the 5 minutes job): */32 * * * * /root/proxy_report_full.sh And the content of /root/proxy_report_full.sh is : #!/bin/bash /usr/bin/sarg -n > /dev/null 2>&1 And I added a small script to remove the yesterday full report (the full report that ends in yesterday that won't be overwritten by the new today full report) in /etc/rc.local to run at startup: /usr/bin/rm_yesterday.sh &>> /var/log/rm_yesterday Where /usr/bin/rm_yesterday.sh: #!/bin/bash find /var/www/sarg/ | grep `date -d Apr1 +"%Y%b%d"`-* | grep -v `date +"%Y%b%d"` | xargs rm -rf * Apr1 is the starting date of the proxy... ** I've placed it in /usr/bin to be mounted early at startup... That arrangement went OK for about a month and a half, except for one time I noticed some errors and reports wasn't generated, and fixed that by making an offset (the two minutes in 32 of the second cron job). However, it then started not to generate reports anymore. By manually trying to generate it it gives the following error: root@proxy-server:~# sarg -n SARG: getword_atoll loop detected after 3 bytes. SARG: Line="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: Record="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: searching for 'x2f' SARG: getword backtrace: SARG: 1:sarg() [0x8050a4a] SARG: 2:sarg() [0x8050c8b] SARG: 3:sarg() [0x804fc2e] SARG: 4:/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x129113] SARG: 5:sarg() [0x80501c9] SARG: Maybe you have a broken date in your /var/log/squid/access.log file When I looked to /var/log/squid/ folder, I noticed that it contains some rotated logs: root@proxy-server:~# ls /var/log/squid/ access.log access.log.1 cache.log cache.log.1 store.log store.log.1 So maybe sarg installed logrotate with it? Or it comes with the standard Ubuntu? I don't remember I installed it manuallly. The question is: What could've gone wrong? Does it have something to do with rotating the log? How can I trace the error and start generating reports again?

    Read the article

  • Any way to recover ext4 filesystems from a deleted LVM logical volume?

    - by Vegar Nilsen
    The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

    Read the article

  • How should I use my new SSD drive?

    - by jasondavis
    I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

    Read the article

  • My network drive disappears from Mac OS Finder

    - by Mariusz
    I have recently bought a Netgear WNDR3800 router to use it in my home network. But just the same day I installed it, I noticed a strange behaviour of Finder and iTunes. Let me explain it further. There is a Synology DS111 NAS attached to that router and two Macs with Mac OS X Lion. One of them is connected by a cable and the second one wirelessly. Before I changed my router to the new one I mentioned above, Finder always used to display my NAS on its sidebar. So I could just click its network name to access shared folders existing on it. But after I installed WNDR3800, I can no longer access the NAS that way. It is no longer displayed. I always have to mount it manually by typing its IP address using the Finder's 'connect to server' option. The same NAS supports TimeMachine backups and has an inbuilt DLNA server. And the same situation here. I can't perform a backup because my NAS is no longer accessible in TimeMachine preferences. iTunes does not display it as well (as a multimedia server) even though it used to before I installed that router. What's important, everything works fine for a couple of minutes after I restart the router or the NAS. Or even when I change the NAS's IP address it becomes accessible again in Finder, TimeMachine and iTunes, but only for some time. Both the Mac computers I mentioned behave the same way. And all those issues have been taking place sice I installed that new router. Before I did that, everything had worked fine. My old router was Netgear WGR614v10. Would you be so kind to tell me what you think could possibly be the reason of that behaviour? What settings of the router should I look closer at? I'm not a network specialist, but is it possible that some network packets are blocked for some reason? I will be grateful for any clues you give me. Thank you.

    Read the article

  • How to Configure Source NAT (Private IP => Public IP Outbound)

    - by DavidScherer
    I'm running VMWare ESXi Free and have Zentyal SBS 3.2 running as a Gateway. I have 5 Public IPS (CIDR/29, let's call them 69.1.1.1 - 69.1.1.5) and currently Zentyal is bound to 69.1.1.1 as the Gateway, with the other 4 Public IPs set as Virtual Interfaces in Zentyal (wan2-wan5) I have machines sitting on the Private Network (10.34.251.x) that, when going Outbound (to Google for instance) should be seen by the Internet as an IP other than the Gateway (69.1.1.1), this is because our machines need to be able to communicate with 3rd party APIs that expect these requests to come from a specific IP. From what I could find, SNAT (Source NAT) in Zentyal is used to achieve this, but I'm not sure how to configure it and cannot find a specific piece of Documentation for it at Zentyal. I've tried setting this up a couple different ways, with no results and at this point I have no idea if I'm going about this completely wrong, or my lack of experience with networking and the associated terminology is preventing me from placing the correct values in the correct fields. I get the following form to set up "SNAT" rules in Zentyal: Perhaps someone can offer some guidance and definitions for the fields above? SNAT Address Is this the Public IP I want to masquerade? Outgoing Interface Should this by my External NIC (one connected to Public 'Net), or is it the "Private" interface? It sounds as though this should be the External interface as I want the traffic from the internal network sent Out over this Interface (using a different IP than normal, anyway) Source Is the the Source on the internal network (one of the private IPs?), a public IP I want to masquerade as, or something else entirely? Destination Is this a place on the Internet (eg, "Only do this for the Site Google.com"/IP) or am I allowing myself to become confused again? Service I'm assuming this allows me to restrict which services this rule will apply to, but is it for a service on the internal network or a service being accessed on the external network? If I can offer any further details or information to make what I'm trying to do more clear, I will happily do so. Honestly any kind of help here would be very appreciated. I'm not a NetOps or anything even close, I spend most of my day writing code and my entire "team" at this company consists of "me, myself, and I" so while I try to broaden my KB at every possible opportunity, I can only learn so much, so fast and I feel like with networking especially there's just so much, coupled with a learning curve for each solution that likes to (from my limited perspective) use slightly different terminology that what I'm used to (and I don't exactly have the necessary experience to cross reference this stuff with the stuff I already know in context).

    Read the article

  • Linux software Raid 10 no superblock

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

    Read the article

  • Gentoo box can't cURL or ping after restarting net.eth1

    - by Curlybraces
    Hi all, the following is completely baffling me. We currently have a gentoo box which acts as our LAMP, DNS, DHCP server. This is assigned a static IP on the network. This server is connected directly to the internet via a BT BusinessHub Router. The server is also connected to a patch panel/switch port which connects the remaining office (around 10 PC's) to the server. Everything has been plain sailing until the other day when the server was restarted. For some reason now only portions of network accessibility is available depending on which ethernet device was last restarted. Restarting net.eth0 allows the office server to cURL, ping, etc but stops all networked PC's from accessing the internet. Then restarting net.eth1 restores all internet to the network but stops the server from curling, pinging, etc again. However, even when the server can't ping, curl, etc, I can still remote SSH and remote MySQL connect from the server command line to other external servers that we own. Here's my route map (router is 192.168.1.254): Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth1 Here's my /etc/conf.d/net: iface_eth0="192.168.1.99 broadcast 192.168.1.255 netmask 255.255.255.0" iface_eth1="dhcp" None of the above have ever been changed however. Things have just ceased to operate correctly, which makes me think it's a freshly added Iptables rule. Here's the Iptables Filter table: Chain INPUT (policy ACCEPT) target prot opt source destination DROP tcp -- ##.##.##.## anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:2199 ACCEPT tcp -- anywhere anywhere tcp dpt:3199 ACCEPT tcp -- ##.###.###.## anywhere tcp dpt:http ACCEPT tcp -- ###.###.##.## anywhere tcp dpt:2199 ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:http ACCEPT tcp -- ##.###.##.## anywhere tcp dpt:http ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:3128 ACCEPT udp -- ##.###.###.### anywhere udp dpt:3128 ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:http ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:https Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere ##.###.###.## DROP all -- anywhere ##.###.###.## ACCEPT all -- anywhere anywhere state NEW,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp spt:2199 ACCEPT udp -- anywhere anywhere udp spt:4817 ACCEPT udp -- anywhere anywhere udp spt:4819 ACCEPT udp -- anywhere anywhere udp spt:3199 Help gratefully appreciated.

    Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >