Search Results

Search found 10731 results on 430 pages for 'k day'.

Page 394/430 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >

  • Recovering damaged external hard disk by installing internally

    - by nfarshchi
    I had a 1TB Western Digital (My book series) 3.5" USB3. One day, the SATA to USB3 converter board was damaged and has not worked since. I decided to open the cover and use the HDD as an internal HDD. When I attached the HDD to my PC and booted up in Windows, it asked me which type of ????? I want to use "MBR or GBR" (I dont remember the exact question) I chose MBR and Windows gave me a 1TB empty Hard drive. I tried to recover with recover my files and some other recovery programs but no success. Some one told me that you should choosed GBR instead of MBR . How can I do that now? Another guy told me that the SATA to USB3 converter board is coded to save data on HDD and you can not use them internally without losing data, and I should find another SATA to USB3 board (exact same). It is impossible to find because they are not produced any more. Please help me to find a solution to bring back my data. UPDATE I have 1TB WD "Mybook" USB 3. the board that convert sata to usb3 was damaged. so when the HDD was in the box computer did not recognize it. I opened the box and remove HDD to use it internal. after connecting to my PC windows showed me one massage that I had two choice MBR or GPT I choosed MBR one and windows gave me 1TB empty new volume. I tried many recovery software to recover my data but no success. I brought it to one expert recovery company and they told me the converter board (SATA to USB3) make some encryption on data and with out that board you cannot recover any thing. so I bought another empty WD box and put the HDD inside but even after that also there is no file. I tried to recover again in this state but no success. so I have some unanswered question. does this converted boards make any password or encryption? if yes how can I solve it? does using many recovery programs affected my data? any suggestion or solution for bring back my data? I had use recovery programs such as : recover my files , EaseUS data recovery, easy recovery, test disk, Ontrack easy recovery . Note: when I was using test disk it asked me to choose which partition table I want to use. as it was I choose NTFS, does this made any change on data?

    Read the article

  • Asterisk: Dropping calls with an "ast_yyerror"

    - by Nick
    I'm having an intermittent issue where asterisk will play our greeting to the caller, and then drop the call instead of making our phones ring. I'm unable to reproduce the problem with any phones I have here, and many callers get through just fine. Some callers though, run into the problem, and I can't find any pattern to it. The bit of information I could find said it was caused by an error in evaluating a dialplan expression. I'm thinking it's this line: exten = START,n,GotoIf($[${FORCE_CLOSED}=TRUE]?CLOSED,1) But I'm not sure what's wrong with it. I see the following error on the console: [Apr 4 16:29:49] WARNING[27038]: ast_expr2.fl:459 ast_yyerror: ast_yyerror(): syntax error: syntax error, unexpected '=', expecting $end; Input:=TRUE^ Surrounding Console output: -- Executing [START@AGInbound:1] Answer("IAX2/AtlantaTeliax-10086", "") in new stack -- Executing [START@AGInbound:2] BackGround("IAX2/AtlantaTeliax-10086", 0000_AG_THANK_YOU_FOR_CALLING_AG") in new stack -- Playing '0000_AG_THANK_YOU_FOR_CALLING_AG.slin' (language 'en') [Apr 4 16:29:49] WARNING[27038]: ast_expr2.fl:459 ast_yyerror: ast_yyerror(): syntax error: syntax error, unexpected '=', expecting $end; Input: =TRUE ^ [Apr 4 16:29:49] WARNING[27038]: ast_expr2.fl:463 ast_yyerror: If you have questions, please refer to doc/tex/channelvariables.tex in the asterisk source. -- Executing [START@AGInbound:3] GotoIf("IAX2/AtlantaTeliax-10086", "?CLOSED,1") in new stack -- Executing [START@AGInbound:4] GotoIfTime("IAX2/AtlantaTeliax-10086", "9:30-17:0|mon-fri|*|*?OPEN,1") in new stack -- Executing [START@AGInbound:5] GotoIfTime("IAX2/AtlantaTeliax-10086", "10:0-18:30|sat|*|*?OPEN,1") in new stack -- Executing [START@AGInbound:6] GotoIfTime("IAX2/AtlantaTeliax-10086", "12:0-17:0|sun|*|*?OPEN,1") in new stack Relevant lines from the dial plan: exten = START,1,Answer() exten = START,n,Background(0000_AG_THANK_YOU_FOR_CALLING_AG) ; See if we're open ; Force Closed if no one's going to be answering exten = START,n,GotoIf($[${FORCE_CLOSED}=TRUE]?CLOSED,1) exten = START,n,GotoIfTime(${AG_WEEKDAY_OPEN_HOUR}:${AG_WEEKDAY_OPEN_MIN}-${AG$ exten = START,n,GotoIfTime(${AG_SATURDAY_OPEN_HOUR}:${AG_SATURDAY_OPEN_MIN}-${$ exten = START,n,GotoIfTime(${AG_SUNDAY_OPEN_HOUR}:${AG_SUNDAY_OPEN_MIN}-${AG_S$ ; ...and we're not. But maybe the time of day has been overridden? exten = START,n,GotoIf($[${OVERRIDE_TIME_OF_DAY}=TRUE]?OPEN,1) ; No override... We're definatly closed. exten = START,n,Goto(CLOSED,1) Any idea what's wrong with the expression? We recently upgraded from 1.4 to 1.6.

    Read the article

  • 2 servers, high availability and faster response

    - by user17886
    I recently bought a second webserver because I worry about hardware failure of my old server. Now that I have that second server I wish to do a little more then just have one server standby and replicate all day. As long as it's there I might as well get some advantage our of it ! I have a website powered by ubuntu 12.04, nginx, php-fpm, apc, mysql (5.5) and couchdb. Im currently testing configurations where i can achieve failover AND make good use of the extra harware for faster responses / distributed load. The setup I am testing nowinvolves heartbeat for ip failover and two identical servers. Of the two servers only one has a public ip adress. If one server crashes the other server takes over the public ip adress. On an incoming request nginx forwards the request tot php-fpm to either server a of server b (50/50 if both servers are alive). Once the request has been send to php-fpm both servers look at localhost for the mysql server. I use master-master mysql replication for this. The file system is synced with lsyncd. This works pretty well but Im reading it's discouraged by the (mysql) community. Another option I could think of is to use one server as a mysql master and one server as a web/php server. The servers would still sync their filesystem, would still run the same duplicate software (nginx,mysql) but master slave mysql replication could be used. As long as bother servers are alive I could just prefer nginx to listen to ip a and mysql to ip b. If one server is down, the other server could take over the task of the other server, simply by ip switching. But im completely new at this so I would greatly value your expert advice. Is either of the two setups any good ? If you have any thoughts on this please let me know ! PS, virtualisation, hosting on different locations or active/passive setups are not solutions im looking for. I find virtual server either too slow or too expensive. I already have a passive failover on another location. But in case of a crash I found the site was still unreachable for too long due to dns caching.

    Read the article

  • Windows Update and IE fail to connect, but Chrome fine?

    - by I Gottlieb
    Out of ideas on this one. (Running Windows Vista.) I have a program that accesses the internet to retrieve financial market data. One day it tells me that it can't log in -- timeout error. I check the documentation and it says must have a working copy of IE browser installed. I check IE (have IE9) and sure enough -- it just spins. No error message, not timeout, no 'try later' -- just spins -- as far as I can tell, indefinitely. Any page, any address. Even access to a localhost site just spins. Chrome works fine. So does another program I have that fetches market data. Windows 'diagnose and repair' says my internet connection is working fine. I tried uninstall/re-install of IE. Same spinning. I tried to install Windows Updates, and guess what? I can't. I comes up with error 80072efd; checked documentation for the error and it says I should check firewall blockage. Thing is, the only firewall I have is Windows Firewall, and obviously it wouldn't be blocking Windows Update. In contrast, Windows 'Help' in all programs has no problem accessing the Internet. I had a filter on the internet connection, and this was updated just prior to first appearance of the problem. But I uninstalled the filter entirely (official, with passwd from the company's service rep) -- and no difference. I'm guessing that a high level Windows network service file is corrupted -- used only by MS programs and their ilk, but how do I find it? I'd like to avoid having to do a clean install of Windows. Much obliged for any insight. IG Ramhound -- Thanks for reply. I'm familiar with virtual machines as in e.g. JVM or an emulator for an alternative architecture or (theoretical) Turing Machine equivalence. But I'm not familiar with the way you're using the term. Please clarify -- what one needs for this VM 'test' and why you expect it will provide an advantage of insight into the problem. And what sort of 'configuration issue' are you referring to? IG

    Read the article

  • Migrating Split Access Database from one domain to another (not working, details in Q)

    - by Expo_Rob
    Some background: I'm a programmer, not a network administrator, who has been asked to migrate some accounting software (Integrated Office Accounting version 3.2) from an existing domain (OLD_NETWORK) to a new domain (NEW_NETWORK). No-body at the office knows how it works under the hood. It is a split Access 2000 database with the back-end shared and on a file server (which is also the DC) using mapped drives. The DC is NT Server 4 SP 6. The new server is server 2003. The two networks are running independently (ie: two computers on each desk). I have been able to get new computers set up on NEW_NETWORK and working with the IOA software just perfectly but for one problem: The company here uses other entirely separate databases which access the tables IOA maintains (specifically the 'customers' table) via links. To switch between these systems, you press F11 then File-Open the appropriate database and away you go (this is necessary to maintain the permissions that the IOA system uses to protect the customers table). The entire database is Access 2000, the links go to other Access databases, SQL-Server is not involved in any way, nor is a migration to SQL server likely. If I can't migrate anything over, everything will stay as it is, and the NEW_NETWORK computers will not be used. The problem: When I try and update these seperate databases (I shall call one "BANK_ACCOUNT", but the name does not matter), it says "this recordset cannot be updated". It also will sometimes not pull information out of the 'customers' table (ie: date_entered) when looking at a report of everyone who opened a bank account on a certain day (ie: today). I have tried: Giving 'everyone' full control via. shared directory permissions Giving 'everyone' full control on a file system level Checking the permissions within Access (everyone has full read/write on all tables) Copying the entire server contents from one file server to another (ie: xcopy everything) Copying the entire local client files from one computer to another, putting them in the exact same position in the file system, with the same permissons (or full control to 'everyone'). Running as an Administrator Taking one of the NEW_NETWORK computers, having it join OLD_NETWORK and run the software (direct copy from a working system with identical drive mappings), this did not work Weeping openly My Question: Is there anything else I can try? (sorry for this being so long)

    Read the article

  • What server setup for a small web development company? [closed]

    - by Giordano
    I co-own a company with a friend of mine and we have decided to buy a new server to support our business (our current server is an Asus EEE Box, working great but too limited :) ). I should mention that we are web developers but occasionally we do small-office sys admin. Thus, 99% of time we work on GNU/Linux (mainly Ubuntu) but from time to time we need to setup a Windows environment to assist some customers (e.g. setup a temporary SQL Server 2008). Our requirements: Low budget: we don't want the cheapest solution out there but we can't afford to spend too much. Budget could be ~1000-1500€ (before VAT) Robustness: we would like to setup a RAID array and maybe have an external disk where we can store backups Virtualization: we need to be able to setup few servers for development. The scenario is something like this (~8 appliances running in parallel): Redmine + GIT server Bacula server FTP server 3-4 virtual appliances that could be set up on demand to test our applications or support a customer. The appliances could be: LAMP, Tomcat+PostgreSQL, SQL Server Support: if something breaks down it shouldn't be too difficult to find a replacement. Now, given the main requirements, there are some doubts we need to clarify: Do you suggest to buy a prepackaged solution (for example a customized Dell PowerEdge T110 or T310) or to assemble the server by ourselves (buy the separate components)? What RAID configuration do you suggest? I was thinking of RAID1 (probably cheaper) or RAID5. should we buy a hardware RAID controller or is it ok to use a software RAID (mdadm)? In case, which controller do you suggest? What processor do you suggest (Intel Xeon, i3, i5, i7, AMD)? How much RAM? (I was thinking at least 8GB, ~1GB per appliance) What virtualization software do you recommend? VMWare seems to be the best choice, but what about XEN or KVM? We don't want to buy licenses at the moment so we would like to consider only free options. What OS do you recommend? We know Ubuntu, Debian, Gentoo very well (we would like to use Ubuntu Server), however it seems a lot of people goes for CentOS. Thanks in advance if you can help us with this! It's our first "serious" server so many doubts popped up :) Please feel free to add further recommendations if you have some to share ;) Have a nice day

    Read the article

  • Google Rules for Retail

    - by David Dorf
    In the book What Would Google Do?, Jeff Jarvis outlines ten "Google Rules" that define how Google acts.  These rules help define how Web 2.0 businesses operate today and into the future.  While there's a chapter in the book on applying these rules to the retail industry, it wasn't very in-depth.  So I've decided to more directly apply the rules to retail, along with some notable examples of success.  The table below shows Jeff's Google Rule, some Industry Examples, and New Retailer Rules that I created. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid black 1.0pt; mso-border-themecolor:text1; mso-border-alt:solid black .5pt; mso-border-themecolor:text1; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-border-insideh:.5pt solid black; mso-border-insideh-themecolor:text1; mso-border-insidev:.5pt solid black; mso-border-insidev-themecolor:text1; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Google Rule Industry Examples New Retailer Rule New Relationship Your worst customer is your friend; you best customer is your partner Newegg.com lets manufacturers respond to customer comments that are critical of the product, and their EggXpert site lets customers help other customers. Listen to what your customers are saying about you.  Convert the critics to fans and the fans to influencers. New Architecture Join a network; be a platform Tesco and BestBuy released APIs for their product catalogs so third-parties could create new applications. Become a destination for information. New Publicness Life is public, so is business Zappos and WholeFoods founders are prolific tweeters/bloggers, sharing their opinions and connecting to customers.  It's not always pretty, but it's genuine. Be transparent.  Share both your successes and failures with your customers. New Society Elegant organization Wet Seal helps their customers assemble outfits and show them off to each other.  Barnes & Noble has a community site that includes a bookclub. Communities of your customers already exist, so help them organize better. New Economy Mass market is dead; long live the mass of niches lululemon found a niche for yoga inspired athletic wear.  Threadless uses crowd-sourcing to design short-runs of T-shirts. Serve small markets with niche products. New Business Reality Decide what business you're in When Lowes realized catering to women brought the men along, their sales increased. Customers want experiences to go with the products they buy. New Attitude Trust the people and listen In 2008 Starbucks launched MyStartbucksIdea to solicit ideas from their customers. Use social networks as additional data points for making better merchandising decisions. New Ethic Be honest and transparent; don't be evil Target is giving away reusable shopping bags for Earth Day.  Kohl's has outfitted 67 stores with solar arrays. Being green earns customers' respect and lowers costs too. New Speed Life is live H&M and Zara keep up with fashion trends. Be prepared to pounce on you customers' fickle interests. New Imperatives Encourage, enable and protect innovation 1-800-Flowers was the first do sales in Facebook and an early adopter of mobile commerce.  The Sears Personal Shopper mobile app finds products based on a photo. Give your staff permission to fail so innovation won't be stifled. Jeff will be a keynote speaker at Crosstalk, our upcoming annual user conference, so I'm looking forward to hearing more of his perspective on retail and the new economy.

    Read the article

  • Aggregate SharePoint Event/Items into your Calendar view using Calendar Overlay

    - by eJugnoo
    One of the most common features I have seen in common use for SharePoint (prior to 2010) in Intranet environments for Team site is Calendar’s. Not only the Calendar list type, but also the ability to add a Calendar view to any list that has the desired columns to construct a Calendar – such as Start, End, Title etc. While this was all great for a single site/calendar, the problem of having to track numerous calendar’s remained. With introduction of Outlook 2007 bi-directional integration with SharePoint, and particularly the ability of Outlook to overlay calendar helped bridge the gap. Now one could connect to number of team sites, and setup Calendar overlays in Outlook using varying colours, to easily identify event source and yet benefit from the plotting of events on single Calendar view. This was all good, but each user in your Enterprise was supposed to setup in a “pull” fashion. This is good for flexibility, not so good when you need to “push” consistency and productivity (re-use). So, what was missing on SharePoint is the ability to have server-side overlay’s that everyone can see – in a single place, aggregating multiple sources. Until SharePoint 2010 arrived! Calendars Overlay in SharePoint 2010 There are Calendar lists and Calendar views. View can be created for almost all lists, as far as you have desired column’s in a list like Start, End, Title etc. to be able to describe and plot an item in a Calendar format. In SharePoint 2010, create a new Calendar list. Go to Calendar ribbon tab, and click Calendar Overlay. You get the screen with list of existing Overlay’s associated with current Calendar (list – in our case). Click on “New Calendar”… Notice the breadcrumb! You are adding Overlay to existing list (Team Calendar – in our case). You have choice of “pulling” Calendar info from an existing Calendar (list/view) in SharePoint or even from Exchange! Set standard info like a name, description and decide the colour you want for the items in aggregated Calendar overlay. Select the source site/list/view, anywhere in farm. When you select Exchange as source of Calendar, you get option to add OWA and Exchange Web Service url. I will cover details of connecting with Exchange in another post, and focus on Overlay’s with SharePoint for this one. Once you have added a new Calendar overlay to existing Calendar veiw, you get something like below for Day view, Week view, and Month view respectively Notice the Overlay colours: Now, if you decide to connect this Calendar to Outlook to sync the items, it will only sync items from main view, and not from Overlay source. So such Overlay of calendar’s is server-side aggregation only. That increases my curiosity, so I try adding the Calendar list view as a web-part on a new page. As you see, this instance of view didn’t include item from source that we had added to default Calendar view. This is – probably – due to the fact that this is a new web-part view for the page. If you want to add overlay to this one, you have to redo that from Ribbon. This also means, subject to purpose and context you get the flexibility to decide what overlay is suited. Also you can only add 10 Overlay’s to an existing view instance. Conclusion Calendar Overlay is clearly a very useful feature that fills a gap of not being able to aggregate information from multiple sources into a Calendar view within context of current items. Source of items can be existing SharePoint calendar views on any site, or even Exchange (via OWA/Exchange web services). List type for source doesn’t matter, it just need a Calendar view type available. You can have 10 overlays. Overlays are for the specific view only, and are server-side only – which means they do not get synced in Outlook. While you can drag-drop current list items, you cannot edit overlay items as they are read-only within scope of current Calendar view. You can of course click on source Overlay item to edit at the source. I’d like to hear, how you think Overlay’s will help you in your case, or how you are already using them... Enjoy SharePoint! --Sharad

    Read the article

  • Adding A Custom Dropdown in RCDC for Forefront Identity Manager 2010

    - by Daniel Lackey
    My latest exploration has been FIM 2010 for Identity Management. The following is a post of how to add a custom dropdown for the FIM Portal. I have decided to document this as I cannot find documentation on how to do this anywhere else. I hope that it finds useful to others.   For starters, this was to me not an easy task to figure out. I really would like to know why it is so cumbersome to do something that seems like a lot of people would need to do, but that’s for another day J   The dropdown I wanted to add was for ‘Account Status’ which would display if the account is ‘Enabled’ or ‘Disabled’ in the data source Active Directory. This option would also allow helpdesk users or admins to administer the userAccountControl attribute in AD from the FIM Portal interface.   The first thing I had to do was create the attribute itself. This is done by going to Administration à Schema Management from the FIM 2010 portal. Once here, you click on All Attributes. What is listed here are all attributes and their associated Resource Types in FIM. To create the ‘AccountStatus’ attribute, click on New. As shown below, enter ‘AccountStatus’ with no spaces for the System Name and ‘Account Status’ for the Display Name. The Data Type is going to be ‘Indexed String’. Click Next.           Leave everything on the Localization tab default and click Next.   On the Validation tab as shown below, we will enter the regex expression ^(Enabled|Disabled)?$ with our two desired string values ‘Enabled’ and ‘Disabled’. Click on Finish and then and Submit to complete adding the attribute.       The next step involves associating the attribute with a resource type. This is called ‘Binding’ the attribute. From the Schema Management page, click on All Bindings. From the page that comes up, click on New. As shown below, enter ‘User’ for the Resource Type and ‘Account Status’ for the Attribute Type. This is essentially binding the Account Status attribute to the ‘User’ Resource Type. Click Next.    On the ‘Attribute Override’ tab, type in ‘Account Status’ for the Display Name field. Click Next.   On the ‘Localization’ tab, click Next.   On the ‘Validation’ tab, enter the regex expression ^(Enabled|Disabled)?$ we entered previously for the attribute. Click Finish and then Submit to complete.   Now that the Attribute and the Binding are complete, you have to give users permission to see the attribute on the User Edit page. Go to Administration à Management Policy Rules. Look for the rule named Administration: Administrators can read and update Users and click on it. Once it opens, click on the ‘Target Resources’ tab and look at the section named Resource Attributes. Type in at the end the ‘Account Status’ attribute and check it with the validator. Once done click on OK to save the changes.         Lastly, we need to add the actual dropdown control to the RCDC (Resource Control Display Configuration) for User Editing. Go to Administration à Resource Control Display Configuration. From here navigate until you find the RCDC named Configuration for User Editing RCDC and click on it. The following is what you will see:       First step is to export the Configuration Data file. Click on the Export configuration link and save the file to your desktop of other folder.   Find the file you just exported and open the file in your XML editor of choice. I use notepad but anything will work. Since we are adding a dropdown control, first find another control in the existing file that is already a dropdown in FIM. I used EmployeeType as my example. Copy the control from the beginning tag named <my:Control… to the ending tag </my:Control>. Now take what you copied and paste it in whatever location you desire within the form between two other controls. I chose to place the ‘Account Status’ field after the ‘Account Name’ field. After you paste the control you will need to modify so it looks like this:       Notice where you specify what attribute you are dealing with where it has AccountStatus in the XML. Once you are complete with modifying this, save the file and make sure it is a .xml file.   Now go back to the Configuration for User Editing screen and look at the section named ‘Configuration Data’. Click the ‘Browse’ button and find the XML file you just modified and choose it. Click OK on the bottom of the window and you are done!   Now when you click on a user’s name in the FIM Portal, you should see the newly added dropdown box as below:       Later I will post more about this drop down, specifically on how to automate actually ‘Disabling’ the account in the data source through the FIM Workflows and MAs.   <my:Control my:Name="AccountStatus" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=AccountStatus.DisplayName}" my:Description="{Binding Source=schema, Path=AccountStatus.Description}" my:RightsLevel="{Binding Source=rights, Path=AccountStatus}"> <my:Properties> <my:Property my:Name="ValuePath" my:Value="Value"/> <my:Property my:Name="CaptionPath" my:Value="Caption"/> <my:Property my:Name="HintPath" my:Value="Hint"/> <my:Property my:Name="ItemSource" my:Value="{Binding Source=schema, Path=AccountStatus.LocalizedAllowedValues}"/> <my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=AccountStatus, Mode=TwoWay}"/> </my:Properties> </my:Control>

    Read the article

  • XNA Notes 009

    - by George Clingerman
    This past week the MVPs (myself included) were on Microsoft campus for the MVP summit. So I apologize in advance if you did something cool or heard of something cool happening with XNA and XBLIGs and it’s not in my notes. I did my best to stay on top of things, but honestly this community is fast and furious with what it’s doing and creating. I really can’t keep up and that’s fantastic! But here’s what I *did* notice while I was there on Microsoft Campus (and I did make sure to point out to the XNA team several of these very cool happenings while I had their ears). Time Critical XNA News: The XNA team wants you to know that Dream Build Play registration is now open! http://blogs.msdn.com/b/xna/archive/2011/02/28/registration-now-open-for-dream-build-play-2011-challenge.aspx Join the XNA-UK create on March 24, 2011 at the Microsoft Tech Days Conference http://xna-uk.net/blogs/darkgenesis/archive/2011/02/27/join-the-xna-uk-crew-at-the-microsoft-tech-days-conference-on-24th-march-2011.aspx XNA Team: Shawn Hargreaves shares one of the coolest things that’s happened in the XNA community http://blogs.msdn.com/b/shawnhar/archive/2011/03/02/xbox-indies-pivot-view.aspx Nick Gravelyn continues his unique marketing/work prioritization strategy as he tries to get to 5,000 Pixel Man users before he makes Pixel Man 2 (and he’s almost there!) http://nickgravelyn.com/pixelman2/ XNA MVPs: A lot of the XNA MVPs were at the Microsoft MVP Summit 2011. Due to NDAs, most things can’t be shared, but I’m sure if you’re curious you could ask them about the general vibe and feeling they got from the team and the future of XNA/XBLIG and more. Catalin Zima and team release the free WP7 game Chickens Can Dream http://twitter.com/CatalinZima/statuses/41174062923390976 http://www.amusedsloth.com/2011/02/chickens-can-dream-is-live/ Charles Humphrey (NemoKrad) posts his March talk source and PowerPoint http://xna-uk.net/blogs/randomchaos/archive/2011/03/04/march-2011-talk-post-processing-framework.aspx XNA Developers: Michael B. McLaughlin posts about ANTS Memory Profile and creates a CheckMemoryAllocationGame sample (extremely useful if you’re looking to see how much memory some operation allocates!) http://geekswithblogs.net/mikebmcl/archive/2011/02/28/ants-memory-profiler-7.0-review.aspx http://geekswithblogs.net/mikebmcl/archive/2011/03/01/checkmemoryallocationgame-sample.aspx Andy Schatz (2009 IGF winner for Monaco) talking XNA at GDC 2011 http://www.gamasutra.com/view/news/33313/GDC_2011_Andy_Schatz_Ill_Make_My_Last_Game_When_I_Die.php Xbox LIVE Indie Games (XBLIG): Clover: A Curious Tale by BinaryTweed is coming as a Deal of the Week during St. Patricks Day http://majornelson.com/archive/2011/03/03/comingsoontothexboxlivemarketplacemarchthird.aspx Ska Studios away at GDC but still very post happy as always http://www.ska-studios.com/2011/03/02/swamped-picture-pack/ http://www.ska-studios.com/2011/02/28/the-february-showcase/ http://www.ska-studios.com/2011/02/25/good-morning-gato-51-smelling-the-roses/ Just Press Start interviews Matthew Mikuszewski of Darkwind Media about Blocks Indie http://justpressstart.net/?p=516 Gamergeddon Xbox Indie Game Round Up - February 27th http://www.gamergeddon.com/2011/02/27/xbox-indie-game-round-up-february-27th/ http://www.gamergeddon.com/category/xbox-360/indie-games/ GameMarx does a round up of all the Xbox Live Indie Game podcasts that are currently available http://www.gamemarx.com/news/2011/02/27/xbox-live-indie-game-podcasts.aspx GameMarx episode 11 http://www.gamemarx.com/video/the-show/26/ep-11-february-25-2011.aspx In perhaps what I feel is the most exciting news I’ve heard all week, Michael C. Neel (ViNull of GameMarx fame) re-launch XboxIndies.com! http://www.gamemarx.com/news/2011/03/01/the-relaunch-of-xboxindies-com.aspx http://xboxindies.com/ Armless Octopus shares a little of what they heard from Luke Schneider of Radiangames during his GDC 2011 talk http://www.armlessoctopus.com/2011/03/02/gdc-2011-luke-schneider-offers-insight-into-radiangames-success/ VVGindiecast Episode 1 with guests Derek Strickland(Mr_Deeke), Kris Steele(Kriswd40 from FunInfused Games) and Dave Voyles(From armlessoctopus.com) http://vvgtv.com/2011/02/25/vvgindiecast-xblig-podcast/ If you’re doing Xbox LIVE Indie Game Reviews get in touch with XboxIndies.com to get into their aggregated feed http://forums.create.msdn.com/forums/p/76931/467189.aspx#467189 B.U.T.T.O.N and Flotilla represented XNA very well at the Independent Games Festival (are there any more games entered that were created using XNA? Stand up and be heard!) http://www.igf.com/php-bin/entry2011.php?id=374 Armless Ocotopus interview at GDC 2011 with Soulcaster creator Ian Stocker http://www.armlessoctopus.com/2011/03/04/gdc-2011-interview-with-soulcaster-creator-ian-stocker/ MommysBestGames gets a nod in the DarkBasic newsletter where it features the Explosionade Editor (just do a search for Explosionade to get to the interesting bits!) http://www.thegamecreators.com/pages/newsletters/newsletter_issue_98.html You may be hearing the cries of FortressCraft (coming soon to XBLIG) being so wrong for stealing the idea from MineCraft. But did you know the the game MineCraft started from was an XNA game called Infiniminer? XNA is getting it’s fingers into EVERYTHING! http://www.minecraftwiki.net/wiki/Infiniminer XNA Development: TorqueX is NOT dead thanks to the tremendous efforts of the XNA Community working on the CEV (special thanks to @PinoEire for all his hard work on making that happen!) http://www.garagegames.com/community/blogs/view/20878 http://torquecev.com/ Dave Henry has posted XNA 3.x adding platformer start kit to the network game state management on his new site http://twitter.com/#!/mort8088/status/43407715908853760 http://mort8088.com/2011/03/03/xna-3-x-adding-platformer-starter-kit-to-network-game-state-management/ Mark Bamford releases XNAViewer 4.0, great for running XNA games inside of a Windows Form (for building level editors, etc.) http://twitter.com/#!/xzodia04/status/43466830412660736 http://xnaviewer.codeplex.com/ Unit testing an XNA game with Resharper and NUnit http://smnbss.wordpress.com/2011/02/28/planetx-unit-testing-an-xna-game-with-resharper-and-nunit-wp7-xbox-xna/ XNA for Silverlight developers: Part 5 - Input (touch + gestures) http://ht.ly/1bxwUE Mike McLaughlin shares a link he stumbled across for those looking to understand vector and matrix math http://twitter.com/#!/mikebmcl/status/42587074725036032 http://chortle.ccsu.edu/VectorLessons/vectorIndex.html DigitalRune Resources Pooling in XNA (Part 1) http://www.digitalrune.com/Support/Blog/tabid/719/EntryId/84/DigitalRune-Helper-Library-Resource-Pooling-in-XNA-Part-1.aspx JohnK “bobthecbuilder” released a new SunBurn Update that lowers the requirements for Windows Games http://twitter.com/#!/bobthecbuilder/status/43457306578522112 http://www.synapsegaming.com/blogs/johnk/archive/2011/03/03/sunburn-update-windows-redistributable.aspx Quick update on the Indiefreaks Game Framework v0.4 development status http://indiefreaks.com/2011/03/04/quick-update-on-igf-v0-4-development/

    Read the article

  • SQL SERVER – Beginning SQL Server: One Step at a Time – SQL Server Magazine

    - by pinaldave
    I am glad to announce that along with SQLAuthority.com, I will be blogging on the prominent site of SQL Server Magazine. My very first blog post there is already live; read here: Beginning SQL Server: One Step at a Time. My association with SQL Server Magazine has been quite long, I have written nearly 7 to 8 SQL Server articles for the print magazine and it has been a great experience. I used to stay in the United States at that time. I moved back to India for good, and during this process, I had put everything on hold for a while. Just like many things, “temporary” things become “permanent” – coming back to SQLMag was on hold for long time. Well, this New Year, things have changed – once again, I am back with my online presence at SQLMag.com. Everybody is a beginner at every task or activity at some point of his/her life: spelling words for the first time; learning how to drive for the first time, etc. No one is perfect at the start of any task, but every human is different. As time passes, we all develop our interests and begin to study our subject of interest. Most of us dream to get a job in the area of our study – however things change as time passes. I recently read somewhere online (I could not find the link again while writing this one) that all the successful people in various areas have never studied in the area in which they are successful. After going through a formal learning process of what we love, we refuse to stop learning, and we finally stop changing career and focus areas. We move, we dare and we progress. IT field is similar to our life. New IT professionals come to this field every day. There are two types of beginners – a) those who are associated with IT field but not familiar with other technologies, and b) those who are absolutely new to the IT field. Learning a new technology is always exciting and overwhelming for enthusiasts. I am working with database (in particular) for SQL Server for more than 7 years but I am still overwhelmed with so many things to learn. I continue to learn and I do not think that I should ever stop doing so. Just like everybody, I want to be in the race and get ahead in learning the technology. For the same, I am always looking for good guidance. I always try to find a good article, blog or book chapter, which can teach me what I really want to learn at this stage in my career and can be immensely helpful. Quite often, I prefer to read the material where the author does not judge me or assume my understanding. I like to read new concepts like a child, who takes his/her first steps of learning without any prior knowledge. Keeping my personal philosophy and preference in mind, I will be blogging on SQL Server Magazine site. I will be blogging on the beginners stuff. I will be blogging for them, who really want to start and make a mark in this area. I will be blogging for all those who have an extreme passion for learning. I am happy that this is a good start for this year. One of my resolutions is to help every beginner. It is totally possible that in future they all will grow and find the same article quite ‘easy‘ – well when that happens, it indicates the success of the article and material! Well, I encourage everybody to read my SQL Server Magazine blog – I will be blogging there frequently on various topics. To begin, we will be talking about performance tuning, and I assure that I will not shy away from other multiple areas. Read my SQL Server Magazine Blog: Beginning SQL Server: One Step at a Time I think the title says it all. Do leave your comments and feedback to indicate your preference of subject and interest. I am going to continue writing on subject, and the aim is of course to help grow in this field. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Geek Fun: Virtualized Old School Windows – Windows 95

    - by Matthew Guay
    Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Geek Fun: Virtualized Old School Windows – Windows 95

    - by Matthew Guay
    Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Share a Printer on Your Network from Vista or XP to Windows 7

    - by Mysticgeek
    The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Share a Printer on Your Network from Vista or XP to Windows 7

    - by Mysticgeek
    The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • UCM 11g is 4 days old!

    - by kyle.hatlestad
    Ok...so I missed posting a blog entry when UCM 11g and the entire ECM suite released on Tuesday. Hopefully you've already seen the announcements on any number of the Oracle ECM blogs out there such as ECM Alerts, Fusion ECM, bex huff, or C4. So I won't bore you with the same talking points like 179 million check-ins per day or 124 web site page hits per second. Instead, I thought I'd show some screenshots of the new features in UCM and URM 11g. WebLogic Server and Enterprise Manager So probably the biggest change in 11g is UCM and URM now run on top of the WebLogic Server application server. This is a huge step as ECM is now on a standard platform with the rest of Oracle Fusion Middleware which makes installation, configuration, and integration consistent among all the products. From a feature perspective, it's also beneficial because it's now integrated with Oracle Enterprise Manager. Enterprise Manager provides a lot of provisioning control over servers as well as performance monitoring and access to logs and debugging information. Desktop Integration Suite Desktop Integration Suite got a complete overhaul for 11g. It exposes a lot more features within Windows Explorer such as saved searches, workflow queue, and checked-out items. It also now support metadata pop-up screens to let users fill in additional metadata when they drag-n-drop files in! And the integration within Office applications has changed significantly by introducing a dedicated UCM menu to do open, save, compare, etc. Site Studio for External Applications In UCM Site Studio 10gR4, a major architectural shift was introduced which brought several new objects such as elements, region definitions, region templates, and placeholder definitions. This truly separated the content from the display and from the definition. It also allowed separation of the content from needing to be rendered on a complete Site Studio page. Well, the new Site Studio for External Applications takes advantage of that architecture and introduces pre-built tags and plug-ins to JDeveloper to allow to go from simply adding a content area to your web application page to building an entire web site, just like you would have done in Site Studio Designer. In addition to these changes, enhancements to the core Site Studio have been added as well. One of the big ones is called Designer Mode which allows power-users to bypass the standard rules defined by the placeholder definition or template and perform any number of additional actions. This reduces the need to go back to Site Studio Designer or JDeveloper to make more advanced changes to the site. Dashboards As part of the updated records management functionality in both UCM and URM, users can now set a dashboard view on their home page to surface common functions in a single view. It has pre-built "portlets" users can choose from to display and organize they way they want. Behind the scenes, these dashboards are stored as Content Folios. So the dashboards themselves are content items that can be revisioned and shared between users. And new dashboard portlets can be easily added (like the User Profile one in the screenshots) by getting a copy of an existing one, modifying the display, and then checking it in as a new one to select from. URM Interface Enhancements URM includes several new UI and usability enhancements in 11g. There is a new view for physical records, a place to configure "favorite" items to quickly get to, and new placement of the records management menu. BI Publisher Reports Records management in UCM and URM now offer reports generated through embedded BI Publisher. Templates are controlled by rich text files checked directly into the repository, so they can be easily modified. Other Features A new Inbound Refinery conversion option is available that does native Microsoft Office HTML conversion. If your IBR is on Windows and you have the native applications loaded, the IBR can use them to produce HTML. A new GUI template editor for Dynamic Converter is available. It's written in Java so is available through all the supported browsers and platforms. The original ActiveX based editor is also still available. The Component Manager interface has changed to help provide an easier and more descriptive way to enable core components that are installed along with UCM. All of the supported components are immediately available to turn on and do not have to be installed separately as in previous versions. My Downloads is located in the My Content Server menu and provides for easy download of client installs including Desktop Integration Suite and Site Studio Designer. Well, hopefully that gives you a taste for some of the new things in 11g. We're all pretty excited here at Oracle about all the new changes and enhancements. Over the next few months I hope to highlight some of these features more in-depth, so keep your eye out for those posts.

    Read the article

  • Announcing SonicAgile – An Agile Project Management Solution

    - by Stephen.Walther
    I’m happy to announce the public release of SonicAgile – an online tool for managing software projects. You can register for SonicAgile at www.SonicAgile.com and start using it with your team today. SonicAgile is an agile project management solution which is designed to help teams of developers coordinate their work on software projects. SonicAgile supports creating backlogs, scrumboards, and burndown charts. It includes support for acceptance criteria, story estimation, calculating team velocity, and email integration. In short, SonicAgile includes all of the tools that you need to coordinate work on a software project, get stuff done, and build great software. Let me discuss each of the features of SonicAgile in more detail. SonicAgile Backlog You use the backlog to create a prioritized list of user stories such as features, bugs, and change requests. Basically, all future work planned for a product should be captured in the backlog. We focused our attention on designing the user interface for the backlog. Because the main function of the backlog is to prioritize stories, we made it easy to prioritize a story by just drag and dropping the story from one location to another. We also wanted to make it easy to add stories from the product backlog to a sprint backlog. A sprint backlog contains the stories that you plan to complete during a particular sprint. To add a story to a sprint, you just drag the story from the product backlog to the sprint backlog. Finally, we made it easy to track team velocity — the average amount of work that your team completes in each sprint. Your team’s average velocity is displayed in the backlog. When you add too many stories to a sprint – in other words, you attempt to take on too much work – you are warned automatically: SonicAgile Scrumboard Every workday, your team meets to have their daily scrum. During the daily scrum, you can use the SonicAgile Scrumboard to see (at a glance) what everyone on the team is working on. For example, the following scrumboard shows that Stephen is working on the Fix Gravatar Bug story and Pete and Jane have finished working on the Product Details Page story: Every story can be broken into tasks. For example, to create the Product Details Page, you might need to create database objects, do page design, and create an MVC controller. You can use the Scrumboard to track the state of each task. A story can have acceptance criteria which clarify the requirements for the story to be done. For example, here is how you can specify the acceptance criteria for the Product Details Page story: You cannot close a story — and remove the story from the list of active stories on the scrumboard — until all tasks and acceptance criteria associated with the story are done. SonicAgile Burndown Charts You can use Burndown charts to track your team’s progress. SonicAgile supports Release Burndown, Sprint Burndown by Task Estimates, and Sprint Burndown by Story Points charts. For example, here’s a sample of a Sprint Burndown by Story Points chart: The downward slope shows the progress of the team when closing stories. The vertical axis represents story points and the horizontal axis represents time. Email Integration SonicAgile was designed to improve your team’s communication and collaboration. Most stories and tasks require discussion to nail down exactly what work needs to be done. The most natural way to discuss stories and tasks is through email. However, you don’t want these discussions to get lost. When you use SonicAgile, all email discussions concerning a story or a task (including all email attachments) are captured automatically. At any time in the future, you can view all of the email discussion concerning a story or a task by opening the Story Details dialog: Why We Built SonicAgile We built SonicAgile because we needed it for our team. Our consulting company, Superexpert, builds websites for financial services, startups, and large corporations. We have multiple teams working on multiple projects. Keeping on top of all of the work that needs to be done to complete a software project is challenging. You need a good sense of what needs to be done, who is doing it, and when the work will be done. We built SonicAgile because we wanted a lightweight project management tool which we could use to coordinate the work that our team performs on software projects. How We Built SonicAgile We wanted SonicAgile to be easy to use, highly scalable, and have a highly interactive client interface. SonicAgile is very close to being a pure Ajax application. We built SonicAgile using ASP.NET MVC 3, jQuery, and Knockout. We would not have been able to build such a complex Ajax application without these technologies. Almost all of our MVC controller actions return JSON results (While developing SonicAgile, I would have given my left arm to be able to use the new ASP.NET Web API). The controller actions are invoked from jQuery Ajax calls from the browser. We built SonicAgile on Windows Azure. We are taking advantage of SQL Azure, Table Storage, and Blob Storage. Windows Azure enables us to scale very quickly to handle whatever demand is thrown at us. Summary I hope that you will try SonicAgile. You can register at www.SonicAgile.com (there’s a free 30-day trial). The goal of SonicAgile is to make it easier for teams to get more stuff done, work better together, and build amazing software. Let us know what you think!

    Read the article

  • How TiVo is messing up customer support.

    - by James Fleming
    Ok,  So I've gotten a TiVo and overall, I'm happy, but there have been issues and I suspect I've a defective unit. - Now the nice folks after many service calls were happy to swap it out, and to ensure continuity of service, they sent me a new unit (after a $109 deposit).  That was yesterday. Today, when we go to watch a little TV, and wait for our replacement unit to arrive we find our TiVo service has been suspended. WTF? They have an exchange program, but your unit your waiting to exchange is as dead as a doornail until the replacement arrives. How hard is it to keep the old unit active for an extra week? Here is the exchange w/Tivo below... You are currently number 1 in the queue. We apologize for the delay. We will assign you to an agent as soon as one is available.The average amount of time a customer has to wait is 00:13.  Kaylene (Listening)  Kaylene: Thank you for contacting TiVo! My name is Kaylene. So that I may better assist you, are you an existing customer?  james Fleming: yes I am, but I'm now having second thoughts about being one    Kaylene: Thank you for verifying your information. How may I assist you today James?  james Fleming: I've been having issues w/a tivo box & I'm getting a replacement sent out to me (after paying an additional deposit) and now my current unit is no longer activated  Kaylene: I can help you today!  Kaylene: When we process an exchange we do transfer over the service to the replacement box so it is active and ready to go when you receive it.  james Fleming: which is to say you also make my current box worthless until such time I receive a new box?!?!?  Kaylene: I apologize that your original box was deactivated so we could activate your replacement box.  james Fleming: Why on Earth would I bother to pay in advance for a new box if you were going to kill my existing box.  Kaylene: What features are you needing to use on your current box?  james Fleming: I need to be able to access my netflix subscription (if I'm lucky enough to have it work without rebooting)  Kaylene: Can I have you verify the TiVo Service Number of your TiVo box please?  james Fleming: 7460011906979b4  Kaylene: We have your current box temporary service but not all features are available with temporary service as it is not paid for service.  Kaylene: If you like I can transfer your service back to your current box for now. Then once you receive the new box you will have to call in and have the service transferred back to the new box.  james Fleming: Not paid for? Let's see> one tivo box + 3 year service plan + monthly service + $109 deposit on a second box = what?  Kaylene: Would you like me to transfer your service back to your current box?  james Fleming: Yes - that would be helpful  Kaylene: All you will need to do is contact us again once you receive the new box so we can transfer it back.  Kaylene: I have put your service back on TiVo box 7460011906979b4.  james Fleming: What would also be helpful is your firm informing me to how you'd be cutting service in the interim.  james Fleming: Again - I opted to pay to have a second box delivered BEFORE returning the box I have - thus trying to have a continuity of service..  Kaylene: This is not something we normally do so it is important when you contact us to transfer the service back to the new box when you receive it that you reference this case number: 110622-006089.  Kaylene: I apologize about the inconvenience. You may need  force a few connections for the box to recognize the service again.  james Fleming: If it's not something you normally do than WHY would you have a $109 fee and a term for the service.  james Fleming: I am not mad at you, but your company is not impressing me and I'm blogging about this experience  Kaylene: Again I apologize about the inconvenience but you should be good to go now. Is there anything else I can help you with today?  james Fleming: so I need to go through the re-actviate process or is that somethign you do  Kaylene: When you receive the new TiVo box you need to contact us so we can transfer the service to the new box for you.  james Fleming: sure  Kaylene: Is there anything else I can help you with today James?  james Fleming: Nope - please email this transcript to me  Kaylene: I apologize but we do not have the ability to e-mail you a copy of this transcript. You can view it online at  http://www.tivo.com when you sign into your account or you can copy and paste it now to save it.  Kaylene: Thank you for contacting TiVo today. Your reference number for our conversation is 110622-006089. You can save this for your records, and if necessary, provide this to a later agent to pull up what we discussed. There will be a brief satisfaction survey emailed to you. We would appreciate any feedback on your TiVo Chat Support experience today.  Kaylene: Thank you for using TiVo Chat and have a great day James! Good-bye.  Kaylene has disconnected.

    Read the article

  • If You Could Cut Your Meeting Times in ½ Would You?

    - by Brian Dayton
                    I know it sounds like a big promise. And what I'm thinking about may not cut a :60 minute meeting into :30 minutes, but it could make meetings and interactions up to 2X more productive. How? Social Media for the Enterprise, Not Social Media In the Enterprise Bear with me. I'm not talking about whether or not workers should or shouldn't have access to Facebook on corporate networks. That topic has been discussed @ length. I'm also not talking about the direct benefits of Social Networking tools like Presence (the ability to see someone online and ask a question in real-time), blogs, RSS feeds or external tools like Twitter. The Un-Measurable Benefits Would you do something that you believe will have a positive effect--but can't be measured? It's impossible to quantify the effectiveness of a meeting. However, what I am talking about would be more of a byproduct of all of the social networking tools above. Here's the hypothesis: As I've gotten more and more busy with work, family, travel and kids--and the same has happened to my friends and family--I'm less and less connected. But by introducing Facebook to my life I've not only made connections with longtime friends whom I haven't spoken to in years--but I've increased the pace and quality of interactions, on and offline, with close friends who I see and speak to every week. In some cases it even enhances the connections and interactions with those I see or speak to every day. The same holds true in an organization. Especially a larger one with highly matrixed organizational structures. You work with people on a project, new people come in with each different project and a disproportionate amount of time is spent getting oriented and staying current. Going back to the initial value proposition--making meetings shorter/more effective--a large amount of time is spent: -          At Project Kick-off: Meeting and understanding team member's histories, goals & roles -          Ongoing: Summarizing events since the last meeting or update email In my personal, Facebook life today I know that: -          My best friend from college - has been stranded in India for 5 days because of the volcano in Iceland and is now only 250 miles from home -          One of my co-workers started conference calls at 6:30 this morning -          My wife wasn't terribly pleased with my painting skills in our new bathroom (disclosure: she told me this face to face too) Strengthening Weak Links A recent article in CIO Magazine, Three Dangerous Social Media Misconceptions (Kristen Burnham, March 12, 2010) calls out the #1 misconception as follows: 1. "Face-to-face relationships are far more valuable than virtual ones." While some level of physical interaction will always add value to relationships, Gartner says that come 2020, most relationships and teams will be based on "weak links"--that is, you may not have personally met a contact, but you'll know of or may have interacted with him via social sites like Facebook, LinkedIn and Twitter. The sooner your enterprise adopts these tools, the sooner your employees will learn them, and the sooner you'll begin to cultivate these relationships-of-the-future.   I personally believe that it's not an either/or choice between face-to-face and virtual interactions. In fact, I'll be as bold as saying it doesn't matter. I can point to two extremely valuable work relationships that I've had over the past 5 years: -          I shared an office with one of them -          I met the other person, face-to-face, only once Both relationships were very productive. The dynamics were similar. The communication tactics differed immensely. What does matter is the quality, frequency and relevance of interactions. Still sound like too much? An over-promise? Stay tuned for my next post The Gap Between Facebook and LinkedIn. I'll also connect some of the dots with where Oracle Applications and technologies are headed.        

    Read the article

  • “Being Agile” Means No Documentation, Right?

    - by jesschadwick
    Ask most software professionals what Agile is and they’ll probably start talking about flexibility and delivering what the customer wants.  Some may even mention the word “iterations”.  But inevitably, they’ll say at some point that it means less or even no documentation.  After all, doesn’t creating, updating, and circulating painstakingly comprehensive documentation that everyone and their mother have officially signed off on go against the very core of Agile?  Of course it does!  But really, they’re missing the point! Read The Agile Manifesto. (No, seriously - read it now. It’s short. I’ll wait.)  It’s essentially a list of values.  More specifically, it’s a right-side/left-side weighted list of values:  “Value this over that”. Many people seem to get the impression that this is really a “good vs. bad” list and that those values on the right side are evil and should essentially be tossed on the floor.  This leads to the conclusion that in order to be Agile we must throw away our fancy expensive tools, document as little as possible, and scoff at the idea of a project plan.  This conclusion is quite convenient because it essentially means “less work, more productivity!” (particularly in regards to the documentation and project planning).  I couldn’t disagree with this conclusion more. My interpretation of the Manifesto targets “over” as the operative word.  It’s not just a list of right vs. wrong or good vs. bad.  It’s a list of priorities.  In other words, none of the concepts on the list should be removed from your development lifecycle – they are all important… just not equally important.  This is not a unique interpretation, in fact it says so right at the end of the manifesto! So, the next time your team sits down to tackle that big new project, don’t make the first order of business to outlaw all meetings, documentation, and project plans.  Instead, collaborate with both your team and the business members involved (you do have business members sitting in the room, directly involved in the project planning, right?) and determine the bare minimum that will allow all of you to work and communicate in the best way possible.  This often means that you can pick and choose which parts of the Agile methodologies and process work for your particular project and end up with an amalgamation of Waterfall, Agile, XP, SCRUM and whatever other methodologies the members of your team have been exposed to (my favorite is “SCRUMerfall”). The biggest implication of this is that there is no one way to implement Agile.  There is no checklist with which you can tick off boxes and confidently conclude that, “Yep, we’re Agile™!”  In fact, depending on your business and the members of your team, moving to Agile full-bore may actually be ill-advised.  Such a drastic change just ends up taking everyone out of their comfort zone which they inevitably fall back into by the end of the project.  This often results in frustration to the point that Agile is abandoned altogether because “we just need to ship something!”  Needless to say, this is far more devastating to a project. Instead, I offer this approach: keep it simple and take it slow.  If your business members or customers are only involved at the beginning phases and nowhere to be seen until the project is delivered, invite them to your daily meetings; encourage them to keep up to speed on what’s going on on a daily basis and provide feedback.  If your current process is heavy on the documentation, try to reduce it as opposed to eliminating it outright.  If you need a “TPS Change Request” signed in triplicate with a 5-day “cooling off period” before a change is implemented, try a simple bug tracking system!  Tighten the feedback loop! Finally, at the end of every “iteration” (whatever that means to you, as long as it’s relatively frequent), take as much time as you can spare (even if it’s an hour or so) and perform some kind of retrospective.  Learn from your mistakes.  Figure out what’s working for you and what’s not, then fix it.  Before you know it you’ve got a handful of iterations and/or projects under your belt and you sit down with your team to realize that, “Hey, this is working - we’re pretty Agile!”  After all, Agile is a Zen journey.  It’s a destination that you aim for, not force, and even if you never reach true “enlightenment” that doesn’t mean your team can’t be exponentially better off from merely taking the journey.

    Read the article

  • Computer Networks UNISA - Chap 12 &ndash; Networking Security

    - by MarkPearl
    After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

    Read the article

  • Convert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1

    - by DigitalGeekery
    Today look at MCEBuddy for Windows 7 Media Center. This handy app automatically takes your recorded TV files and converts them to MP4, AVI, WMV, or MPEG format. It even has the option to cut out those annoying commercials during the conversion process. Installation and Configuration Download and extract MCE Buddy. (Download link below) Run the setup.exe file and take all the default settings.   Open MCEBuddy Configuration by going to Start > All Programs > MCEBuddy > MCEBuddy Configuration.   Video Paths The MCEBuddy application is comprised of a single window. The first step you’ll want to take is to define your Source and Destination paths. The “Source” will most likely be your Recorded TV directory. The Destination should NOT be the same as the Source folder. Note: The Recorded TV directory in Windows 7 Media Center will only display and play WTV & DVR-MS files. To watch the converted MP4, AVI, WMV, or MPEG files in Windows Media Center you’ll need to add them to your Video Library or Movie Library. Video Conversion Next, choose your preferred format for conversion from the “Convert to” drop down list. The default is MP4 with the H.264 codec. You’ll find a wide variety of formats. The first set of conversion options in the drop down list will resize the video to 720 pixels wide. The next two sections maintain the original size, and the final section is for a variety of portable devices.   Next, you’ll see a group of check boxes below the “Convert to” drop down list. The Commercial Skipping option will cut the commercials while converting the file. Sort By Series will create a sub-folder in your Destination folder for each TV show. Delete Original will delete the WTV file after conversion is complete. (This option is not recommended unless you are sure your files are converting properly and you no longer need the WTV file.) Start Minimized is ideal if you want to run MCEBuddy on Windows startup. Note: MCEBuddy installs and uses Comskip for commercial cutting by default. However, if you have ShowAnalyzer installed, it will use that application instead. Advanced Options To choose a specific time of day to perform the conversions, click the checkbox under the “Advanced Options,” and select the starting and ending times for conversion. For example, convert between 2 hours and 5 hours would be between 2 am and 5am. If you want MCEBuddy to constantly look for and immediately convert new recordings, leave the box unchecked.   The “Video age” option lets you choose a specific number of days to wait before performing the conversion. This can be useful if you want to watch the recordings first and delete those you don’t wish to convert. You can also choose the “Sub Directories” if you’d like MCEBuddy to convert files that are in a sub-folder in your “Source” directory. Second Conversion As you might expect, this option allows MCEBuddy to perform a second conversion of your file. This can be useful if you want to use your first conversion to create a higher quality MP4 or AVI file for playback on a larger screen, and a second one for a portable device such as Zune or iPhone. The same options from the first conversion are also available for the second. You’ll want to choose a separate Destination folder for the second conversion.   Start and Monitor Progress To start converting your video files, simply press the “Start” button at the bottom. You’ll be able to follow the progress in the “Current Activity” section. When all the video files have finished converting, or there are no current files to convert, MCEBuddy will display a “Started – Idle” status. Click “Stop” if you don’t want MCEBuddy to continue scanning for new files.   Conclusion MCEBuddy 1.1 will convert all WTV files in it’s source folder. If you want to pick and choose which recordings to convert, you may want to define a source folder different than the Recorded TV folder and then just copy or move the files you wish to convert into the new source folder. The conversion process does take a good bit of time. If you choose the commercial skipping and second conversion options it can take several hours to fully convert one TV recording. Overall, MCEBuddy makes a nice Media Center addition for those that want to save some space with smaller size files, convert Recorded TV files for their portable device, or automatically remove commercials. If you’re looking for a different method to skip commercials check out our post on how to skip commercials in Windows 7 Media Center. Download MCEBuddy 1.1 Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Skip Commercials in Windows 7 Media CenterHow To Convert Video Files to MP3 with VLCStartup Customizations for Media Center in Windows 7Add Folders to the Movie Library in Windows 7 Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam

    Read the article

  • Difference between LASTDATE and MAX for semi-additive measures in #DAX

    - by Marco Russo (SQLBI)
    I recently wrote an article on SQLBI about the semi-additive measures in DAX. I included the formulas common calculations and there is an interesting point that worth a longer digression: the difference between LASTDATE and MAX (which is similar to FIRSTDATE and MIN – I just describe the former, for the latter just replace the correspondent names). LASTDATE is a dax function that receives an argument that has to be a date column and returns the last date active in the current filter context. Apparently, it is the same value returned by MAX, which returns the maximum value of the argument in the current filter context. Of course, MAX can receive any numeric type (including date), whereas LASTDATE only accepts a column of type date. But overall, they seems identical in the result. However, the difference is a semantic one. In fact, this expression: LASTDATE ( 'Date'[Date] ) could be also rewritten as: FILTER ( VALUES ( 'Date'[Date] ), 'Date'[Date] = MAX ( 'Date'[Date] ) ) LASTDATE is a function that returns a table with a single column and one row, whereas MAX returns a scalar value. In DAX, any expression with one row and one column can be automatically converted into the corresponding scalar value of the single cell returned. The opposite is not true. So you can use LASTDATE in any expression where a table or a scalar is required, but MAX can be used only where a scalar expression is expected. Since LASTDATE returns a table, you can use it in any expression that expects a table as an argument, such as COUNTROWS. In fact, you can write this expression: COUNTROWS ( LASTDATE ( 'Date'[Date] ) ) which will always return 1 or BLANK (if there are no dates active in the current filter context). You cannot pass MAX as an argument of COUNTROWS. You can pass to LASTDATE a reference to a column or any table expression that returns a column. The following two syntaxes are semantically identical: LASTDATE ( 'Date'[Date] ) LASTDATE ( VALUES ( 'Date'[Date] ) ) The result is the same and the use of VALUES is not required because it is implicit in the first syntax, unless you have a row context active. In that case, be careful that using in a row context the LASTDATE function with a direct column reference will produce a context transition (the row context is transformed into a filter context) that hides the external filter context, whereas using VALUES in the argument preserve the existing filter context without applying the context transition of the row context (see the columns LastDate and Values in the following query and result). You can use any other table expressions (including a FILTER) as LASTDATE argument. For example, the following expression will always return the last date available in the Date table, regardless of the current filter context: LASTDATE ( ALL ( 'Date'[Date] ) ) The following query recap the result produced by the different syntaxes described. EVALUATE     CALCULATETABLE(         ADDCOLUMNS(              VALUES ('Date'[Date] ),             "LastDate", LASTDATE( 'Date'[Date] ),             "Values", LASTDATE( VALUES ( 'Date'[Date] ) ),             "Filter", LASTDATE( FILTER ( VALUES ( 'Date'[Date] ), 'Date'[Date] = MAX ( 'Date'[Date] ) ) ),             "All", LASTDATE( ALL ( 'Date'[Date] ) ),             "Max", MAX( 'Date'[Date] )         ),         'Date'[Calendar Year] = 2008     ) ORDER BY 'Date'[Date] The LastDate columns repeat the current date, because the context transition happens within the ADDCOLUMNS. The Values column preserve the existing filter context from being replaced by the context transition, so the result corresponds to the last day in year 2008 (which is filtered in the external CALCULATETABLE). The Filter column works like the Values one, even if we use the FILTER instead of the LASTDATE approach. The All column shows the result of LASTDATE ( ALL ( ‘Date’[Date] ) ) that ignores the filter on Calendar Year (in fact the date returned is in year 2010). Finally, the Max column shows the result of the MAX formula, which is the easiest to use and only don’t return a table if you need it (like in a filter argument of CALCULATE or CALCULATETABLE, where using LASTDATE is shorter). I know that using LASTDATE in complex expressions might create some issue. In my experience, the fact that a context transition happens automatically in presence of a row context is the main reason of confusion and unexpected results in DAX formulas using this function. For a reference of DAX formulas using MAX and LASTDATE, read my article about semi-additive measures in DAX.

    Read the article

  • Oracle OpenWorld Preview: Real World Perspectives from Oracle WebCenter Customers

    - by Christie Flanagan
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you frequent the Oracle WebCenter blog you’ve probably read a lot about the customer experience revolution over the last few months.  An important aspect of the customer experience revolution is the increasing role that peers play in influencing how others perceive a product, brand or solution, simply by sharing their own, real-world experiences.  Think about it, who do you trust more -- marketers and sales people pitching polished messages or peers with similar roles and similar challenges to the ones you face in your business every day? With this spirit in mind, this polished marketer personally invites you to hear directly from Oracle WebCenter customers about their real-life experiences during our customer panel sessions at Oracle OpenWorld next week.  If you’re currently using WebCenter, thinking about it, or just want to find out more about best practices in social business, next-generation portals, enterprise content management or web experience management, be sure to attend these sessions: CON8899 - Becoming a Social Business: Stories from the Front Lines of Change Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West - 3000Priscilla Hancock - Vice President/CIO, University of Louisville Kellie Christensen - Director of Information Technology, Banner EngineeringWhat does it really mean to be a social business? How can you change your organization to embrace social approaches? What pitfalls do you need to avoid? In this lively panel discussion, customer and industry thought leaders in social business explore these topics and more as they share their stories of the good, the bad, and the ugly that can happen when embracing social methods and technologies to improve business success. Using moderated questions and open Q&A from the audience, the panel discusses vital topics such as the critical factors for success, the major issues to avoid, how to gain senior executive support for social efforts, how to handle undesired behavior, and how to measure business impact. This session will take a thought-provoking look at becoming a social business from the inside. CON8900 - Building Next-Generation Portals: An Interactive Customer Panel DiscussionWednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West - 3000Roberts Wayne - Director, IT, Canadian Partnership Against CancerMike Beattie - VP Application Development, Aramark Uniform ServicesJohn Chen - Utilities Services Manager 6, Los Angeles Department of Water & PowerJörg Modlmayr - Head of Product Managment, Siemens AGSocial and collaborative technologies have changed how people interact, learn, and collaborate, and providing a modern, social Web presence is imperative to remain competitive in today’s market. Can your business benefit from a more collaborative and interactive portal environment for employees, customers, and partners? Attend this session to hear from Oracle WebCenter Portal customers as they share their strategies and best practices for providing users with a modern experience that adapts to their needs and includes personalized access to content in context. The panel also addresses how customers have benefited from creating next-generation portals by migrating from older portal technologies to Oracle WebCenter Portal. CON8898 - Land Mines, Potholes, and Dirt Roads: Navigating the Way to ECM NirvanaThursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West - 3001Stephen Madsen - Senior Management Consultant, Alberta Agriculture and Rural DevelopmentHimanshu Parikh - Sr. Director, Enterprise Architecture & Middleware, Ross Stores, Inc.Ten years ago, people were predicting that by this time in history, we’d be some kind of utopian paperless society. As we all know, we're not there yet, but are we getting closer? What is keeping companies from driving down the road to enterprise content management bliss? Most people understand that using ECM as a central platform enables organizations to expedite document-centric processes, but most business processes in organizations are still heavily paper-based. Many of these processes could be automated and improved with an ECM platform infrastructure. In this panel discussion, you’ll hear from Oracle WebCenter customers that have already solved some of these challenges as they share their strategies for success and roads to avoid along your journey. CON8897 - Using Web Experience Management to Drive Online Marketing SuccessThursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West - 3001Blane Nelson - Chief Architect, Ancestry.comMike Remedios - CIO, ArbonneCaitlin Scanlon - Product Manager, Monster WorldwideEvery year, the online channel becomes more imperative for driving organizational top-line revenue, but for many companies, mastering how to best market their products and services in a fast-evolving online world with high customer expectations for personalized experiences can be a complex proposition. Come to this panel discussion, and hear directly from customers on how they are succeeding today by using Web experience management to drive marketing success, using capabilities such as targeting and optimization, user-generated content, mobile site publishing, and site visitor personalization to deliver engaging online experiences. Your Handy Guide to WebCenter at Oracle OpenWorld Want a quick and easy guide to all the keynotes, demos, hands-on labs and WebCenter sessions you definitely don't want to miss at Oracle OpenWorld? Download this handy guide, Focus on WebCenter. More helpful links: * Oracle OpenWorld* Oracle Customer Experience Summit @ OpenWorld* Oracle OpenWorld on Facebook * Oracle OpenWorld on Twitter* Oracle OpenWorld on LinkedIn* Oracle OpenWorld Blog

    Read the article

  • It’s nice to be important, but it’s more important to be nice

    - by BuckWoody
    I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >