microsoft communicator - Page 394

My Tech Ed North America Preview - Certification Edition

- by Chris Gardner

In my previous TechEd North America Preview, I addressed all the content I wanted to see at the show. This time, we shall turn our attention to the certifications I might try to pick up. If you have never been to TechEd North America before, one of the greatest things about the event is an on-site certification center. If you have a couple hours to spare, you can walk up to a test. The first test on my agenda is 70-5231. I took this update test once, but did not do well on the MVC portion2. A few practice tests later, and I think I'm ready to fake that section. After that, I need to complete my road to being a master. The good folks here at work have been having a real love / hate relationship with the idea of me become an MCM in SQL Server3. Of course, before I do that, I need to finally take the SQL Administration tests. Thus, we shall add 70-4324 and 70-4505 to the list. Speaking of MCM, TechEd North America will have a special on test 88-9706. This test is normally $500, and you have to find a place to take it7. However, there is a special 50% off rate for people who take it on location. With those kind of prices, I may just take it as a form of study guide. As a final push, I may take some Windows Phone exams. I mentioned in my previous post that I may attend the 70-5998 Exam Cram session. Unfortunately, I will be staffing the Hands-On-Lab at that time. As we know, this has never stopped me from taking a test. This may lead to fits of 70-5069, but after we've come this far... That should complete my list. Do I really think I'll find time to take 6 tests at TechEd North America? Probably not. I have done it at TechEd North America before, but that was before I was TechEd North America staff. I also had a co-worker pass 9 in one year, but he basically did nothing but travel to Orlando in 2007 to take tests. And what's the point of attending a HUGE conference if you don't network? Of course, networking will have to wait for Friday's post... 1 Upgrade: Transition Your MCPD .NET Framework 3.5 Web Developer Skills to MCPD .NET Framework 4 Web Developer 2Because I never have used, nor do I really think I ever will use, MVC... 3By that, I mean they love the idea, and they hate the price 4Microsoft SQL Server 2008, Implementation and Maintenance 5PRO: Designing, Optimizing and Maintaining a Database Administrative Solution Using Microsoft SQL Server 2008 6SQL Server 2008 Microsoft Certified Master: Knowledge Exam 7Which isn't nearly as expensive as the Lab Exam, nor as difficult to find a location. However, it is not offered at every testing facility. 8PRO: Designing and Developing Windows Phone Applications 9TS: Silverlight 4, Development

Read the article

EPM 11.1.2.2.000 - released

- by THE

Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle’s EPM System Development Team is pleased to announce General Availability of Oracle Hyperion Enterprise Performance Management System release 11.1.2.2. This release is available on the Oracle Software Delivery Cloud ( https://edelivery.oracle.com). This is a localized release available in multiple languages. See "System Requirements and Supported Platforms for Oracle Enterprise Performance Management System 11.1.2.2" ( http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html) for details. In this release, EPM System products extend the new features and products offered with release 11.1.2.1. Please visit the product "New Features Guides" ( http://docs.oracle.com/cd/E17236_01/index.htm), available in the Enterprise Performance Management System Documentation Library for more information. Note: Oracle Hyperion Calculation Manager has replaced Oracle Hyperion Business Rules as the mechanism for designing and managing business rules, therefore, Business Rules is no longer released with EPM System Release 11.1.2.2. If you are applying 11.1.2.2 as a maintenance release, or upgrading to Release 11.1.2.2, and have been using Business Rules in an earlier release, you must migrate to Calculation Manager rules in Release 11.1.2.2. See Oracle Enterprise Performance Management System Installation and Configuration Guide. The EPM System Media pack on Oracle Software Delivery Cloud has been simplified. Software downloads have been merged together. See the Media Pack Readme for a list of downloads needed for your domain/product. IBM WebSphere 7.0.0.19+ (AS, ND) is now supported as an application server. Documentation about deploying to WebSphere is in the chapter titled “Deploying EPM System Products to WebSphere Application Server” in the Oracle Enterprise Performance Management System Installation and Configuration Guide. FireFox 10.x+ and Internet Explorer 9 are now supported Web browsers. Microsoft Office 2010 64 bit is now supported. Microsoft Windows Installer (MSI) Client Installers are now provided for Oracle Essbase Client, Oracle Essbase Administration Services Console, Oracle Essbase Studio Console, and Oracle Hyperion Financial Management Client. Online Help content for EPM System products is served from a central Oracle download location, which reduces the download and installation time for EPM System. You can also install and configure online Help to run locally. For more information, see the Oracle Enterprise Performance Management System Installation and Configuration Guide. For more information on , please see the “Oracle Enterprise Performance Management System, Release 11.1.2.2.000 Readme ( http://docs.oracle.com/cd/E17236_01/epm.1112/epm_1112200_readme.pdf).

Read the article

Oracle Tutor: XPDL conversion (and why you should care)

- by mary.keane

You may have noticed that the Oracle Business Process Converter feature in Tutor 14 supports "XPDL" conversion to Oracle Business Process Analysis Suite (BPA), Oracle Business Process Management Suite (BPM), and Oracle Tutor, and you may have briefly wondered "what is XPDL?" before you moved on to the Visio import feature (a very popular feature in Tutor 14). This posting is for those who do not yet understand (or care) about XPDL and process modeling. Many of us (and I'm including myself) have spent years working in the process definition arena: we've written procedures, designed systems and software to help others write procedures, and have been responsible for embedding policies and procedures into training material for employees. We've worked with tools such as Oracle Tutor, Microsoft Visio, Microsoft Word, and UPK. Most of us have never worked with "modeling tools" before, and we certainly never had to understand BPMN. It's a brave new world in this arena, and companies desperately need people with policy and procedural system expertise to be able to work with system analysts so there is a seamless transfer of knowledge from IT to employees. When working with applications, a picture is worth a thousand words, so eventually you're going to need to understand and be able to work with business process models. XPDL is an acronym for XML Process Definition Language, and it is an interchange format for business process models. It allows you to take a BPMN model that was developed in one workflow application such as BizAgi and import it into another workflow application or a true BPMN management system such as Oracle BPM. Specifically, the XPDL format contains the graphical information of a model as well as any executable information. By using a common format, models can be moved from a basic modeling application used by business owners to applications used by system architects. Over 80 applications support the XPDL format, including MetaStorm ProVision, BEA ALBPM, BizAgi, and Tibco. I mention these applications because we have provided XSLT mapping files specifically for these vendors. Oracle Business Process Converter was designed with user extensibility in mind, and thus users can add their own XML files so that additional XPDL models from other vendors can be converted to BPM, BPA, and Oracle Tutor. Instructions on how to add your own files can be found in Appendix 4 of the Oracle Business Converter manual. Let's take a visual look at how this works. Here is an example of a model devloped in BizAgi: This model can be created by the average business user without a large learning curve, and it's a good start for the system analyst who will be adding web services as well as for the business manager who manages the process described in the model. By exporting this model as XPDL, the information can be converted into Oracle BPA and Oracle BPM as well as converted to Oracle Tutor to become the framework for a procedure. Through this conversion feature, one graphic illustration of a business process can be used by a system analyst, business analyst, business manager, and employee, as seen below. Model Converted to Tutor Procedure Below is the task section of the procedure after conversion from an XPDL file. Model converted to BPA Model converted to BPM End users still want step by step instructions on how to perform their jobs, so procedures (Oracle Tutor) and application simulations (UPK) are still a critical piece of the solution. But IT professionals need graphic descriptions of how the applications work, regardless of whether there are any tasks involving humans. Now there is a way to convert procedures (Oracle Tutor docx files) and basic models (XPDL files) so that business managers and system analysts can share process information. References Wikipedia XPDL. Workflow Management Coalition, XPDL Support and Resources Oracle Business Process Converter manual, Oracle Tutor 14 Oracle Business Process Management 11g If you have any XPDL conversion stories to share, we'd love to hear from you. Best wishes for the coming new year, Mary Keane, Senior Development Manager, Oracle Tutor and BPM

Read the article

Windows Phone 7 Silverlight / XNA development talk

- by subodhnpushpak

Hi, I presented on Windows Phone 7 app development using Silverlight. Here are few pics from the event Windows Phone 7 development VIEW SLIDE SHOW DOWNLOAD ALL I demonstrated the Visual studio, emulator capabilities/ features. An demo on Wp7 app communication with an OData Service, along with a demo on XNA app. There was lot of curious questions; I am listing them here because these keep on popping up again and again: 1. What tools does it takes to develop Wp7 app? Are they free? A typical WP7 app can be developed either using Silverlight or XNA. For developers, Visual Studio 2010 is a good choice as it provides an integrated development environment with lots of useful project templates; which makes the task really easy. For designers, Blend may be used to develop the UI in XAML. Both the tools are FREE (express version) to download and very intuitive to use. 2. What about the learning curve? If you know C#, (or any other programming language), learning curve is really flat. XAML (used for UI) may be new for you, but trust me; its very intuitive. Also you can use Microsoft Blend to generate the UI (XAML) for you. 3. How can I develop /test app without using actual device? How can I be sure my app runs as expected on actual device? The WP7 SDK comes along with an excellent emulator; which you can use for development/ testing on a computer. Later you can just change a setting and deploy the application on WP7. You will require Zune software for deploying the application on phone along with Developers key from WP7 marketplace. You can obtain key from marketplace by filling a form. The whole process for registering is easy; just follow the steps on the site. 4. Which one should I use? Silverlight or XNA? Use Silverlight for enterprise/ business / utility apps. Use XNA for Games app. While each platform is capable / strong and may be used in conjunction as well; The methodologies used for development in these platforms are very different. XNA works on typical Do..While loop where as Silverlight works on event based methodology. 5. Where are the learning resources? Are they free? There is lots of stuff on WP7. Most of them are free. There is a excellent free book by Charles Petzold to download and http://www.microsoft.com/windowsphone is full of demos /todos / vidoes. All the exciting stuff was captured live and you can view it here; in case you were not able to catch it live!! @ http://livestre.am/AUfx. My talk starts from 3:19:00 timeline in the video!! Is there an app you miss on WP7? Do let me know about it and I may work on it for free !!! Keep discovering. Keep is Simple. WP7. Subodh

Read the article

Taking a screenshot from within a Silverlight #WP7 application

- by Laurent Bugnion

Often times, you want to take a screenshot of an application’s page. There can be multiple reasons. For instance, you can use this to provide an easy feedback method to beta testers. I find this super invaluable when working on integration of design in an app, and the user can take quick screenshots, attach them to an email and send them to me directly from the Windows Phone device. However, the same mechanism can also be used to provide screenshots are a feature of the app, for example if the user wants to save the current status of his application, etc. Caveats Note the following: The code requires an XNA library to save the picture to the media library. To have this, follow the steps: In your application (or class library), add a reference to Microsoft.Xna.Framework. In your code, add a “using” statement to Microsoft.Xna.Framework.Media. In the Properties folder, open WMAppManifest.xml and add the following capability: ID_CAP_MEDIALIB. The method call will fail with an exception if the device is connected to the Zune application on the PC. To avoid this, either disconnect the device when testing, or end the Zune application on the PC. While the method call will not fail on the emulator, there is no way to access the media library, so it is pretty much useless on this platform. This method only prints Silverlight elements to the output image. Other elements (such as a WebBrowser control’s content for instance) will output a black rectangle. The code public static void SaveToMediaLibrary( FrameworkElement element, string title) { try { var bmp = new WriteableBitmap(element, null); var ms = new MemoryStream(); bmp.SaveJpeg( ms, (int)element.ActualWidth, (int)element.ActualHeight, 0, 100); ms.Seek(0, SeekOrigin.Begin); var lib = new MediaLibrary(); var filePath = string.Format(title + ".jpg"); lib.SavePicture(filePath, ms); MessageBox.Show( "Saved in your media library!", "Done", MessageBoxButton.OK); } catch { MessageBox.Show( "There was an error. Please disconnect your phone from the computer before saving.", "Cannot save", MessageBoxButton.OK); } } This method can save any FrameworkElement. Typically I use it to save a whole page, but you can pass any other element to it. On line 7, we create a new WriteableBitmap. This excellent class can render a visual tree into a bitmap. Note that for even more features, you can use the great WriteableBitmapEx class library (which is open source). On lines 9 to 16, we save the WriteableBitmap to a MemoryStream. The only format supported by default is JPEG, however it is possible to convert to other formats with the ImageTools library (also open source). Lines 18 to 20 save the picture to the Windows Phone device’s media library. Using the image To retrieve the image, simply launch the Pictures library on the phone. The image will be in Saved Pictures. From here, you can share the image (by email, for instance), or synchronize it with the PC using the Zune software. Saving to other platforms It is of course possible to save to other platforms than the media library. For example, you can send the image to a web service, or save it to the isolated storage on the device. To do this, instead of using a MemoryStream, you can use any other stream (such as a web request stream, or a file stream) and save to that instead. Hopefully this code will be helpful to you! Happy coding, Laurent Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

Read the article

Stir Trek 2: Iron Man Edition

Next month (7 May 2010) Ill be presenting at the second annual Stir Trek event in Columbus, Ohio. Stir Trek (so named because last year its themes mixed MIX and the opening of the Star Trek movie) is a very cool local event. Its a lot of fun to present at and to attend, because of its unique venue: a movie theater. And whats more, the cost of admission includes a private showing of a new movie (this year: Iron Man 2). The sessions cover a variety of topics (not just Microsoft), similar to CodeMash. The event recently sold out, so Im not telling you all of this so that you can go and sign up (though I believe you can get on the waitlist still). Rather, this is pretty much just an excuse for me to talk about my session as a way to organize my thoughts. Im actually speaking on the same topic as I did last year, but the key difference is that last year the subject of my session was nowhere close to being released, and this year, its RTM (as of last week). Thats right, the topic is Whats New in ASP.NET 4 how did you guess? Whats New in ASP.NET 4 So, just what *is* new in ASP.NET 4? Hasnt Microsoft been spending all of their time on Silverlight and MVC the last few years? Well, actually, no. There are some pretty cool things that are now available out of the box in ASP.NET 4. Theres a nice summary of the new features on MSDN. Here is my super-brief summary: Extensible Output Caching use providers like distributed cache or file system cache Preload Web Applications IIS 7.5 only; avoid the startup tax for your site by preloading it. Permanent (301) Redirects are finally supported by the framework in one line of code, not two. Session State Compression Can speed up session access in a web farm environment. Test it to see. Web Forms Features several of which mirror ASP.NET MVC advantages (viewstate, control ids) Set Meta Keywords and Description easily Granular and inheritable control over ViewState Support for more recent browsers and devices Routing (introduced in 3.5 SP1) some new features and zero web.config changes required Client ID control makes client manipulation of DOM elements much simpler. Row Selection in Data Controls fixed (id based, not row index based) FormView and ListView enhancements (less markup, more CSS compliant) New QueryExtender control makes filtering data from other Data Source Controls easy More CSS and Accessibility support Reduction of Tables and more control over output for other template controls Dynamic Data enhancements More control templates Support for inheritance in the Data Model New Attributes ASP.NET Chart Control (learn more) Lots of IDE enhancements Web Deploy tool My session will cover many but not all of these features. Theres only an hour (3pm-4pm), and its right before the prize giveaway and movie showing, so Ill be moving quickly and most likely answering questions off-line via email after the talk. Hope to see you there! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

What DX level does my graphics card support? Does it go to 11?

- by Daniel Moth

Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Windows Azure SDK 1.3 addresses early adopter feedback

- by Eric Nelson

At the end of November 2010 we released a new version of the Windows Azure SDK which contains many new features driven by the great feedback of early adopters plus a shiny new portal. New Portal implemented in Silverlight: The new portal is implemented using Silverlight and replaces the (IMHO rather clunky) original HTML + JavaScript portal. It is 100% better although does still have a few bugs. Enjoy! P.S. You can if you wish still use the old portal: New runtime functionality: The following functionality is now generally available through the Windows Azure SDK and Windows Azure Tools for Visual Studio and the new Windows Azure Management Portal: Elevated Privileges and Full IIS. You can now run a portion or all of your code in Web and Worker roles with elevated administrator privileges. The Web role now provides Full IIS functionality, which enables multiple IIS sites per Web role and the ability to install IIS modules. Remote Desktop functionality enables you to connect to a running instance of your application or service in order to monitor activity and troubleshoot common problems. Windows Server 2008 R2 Roles: Windows Azure now supports Windows Server 2008 R2 in its Web, worker and VM roles. This new support enables you to take advantage of the full range of Windows Server 2008 R2 features such as IIS 7.5, AppLocker, and enhanced command-line and automated management using PowerShell Version 2.0. New runtime functionality – in beta: Windows Azure Virtual Machine Role: Support for more types of new and existing Windows applications will soon be available with the introduction of the Virtual Machine (VM) role. You can move more existing applications to Windows Azure, reducing the need to make costly code or deployment changes. Extra Small Windows Azure Instance, which is priced at $0.05 per compute hour, provides developers with a cost-effective training and development environment. Developers can also use the Extra Small instance to prototype cloud solutions at a lower cost. Windows Azure Connect: (formerly Project Sydney), which enables a simple and easy-to-manage mechanism to set up IP-based network connectivity between on-premises and Windows Azure resources, is the first Windows Azure Virtual Network feature that we’re making available as a CTP. You can sign up for any of the betas via the Windows Azure Management Portal. Improved processes and simplified operations New portal! (see above) Access to new diagnostic information including the ability to click on a role to see role type, deployment time and last reboot time A new sign-up process that dramatically reduces the number of steps needed to sign up for Windows Azure. New scenario based Windows Azure Platform forums to help answer questions and share knowledge more efficiently. Multiple Service Administrators: Windows Azure now supports multiple Windows Live IDs to have administrator privileges on the same Windows Azure account. The objective is to make it easy for a team to work on the same Windows Azure account while using their individual Windows Live IDs. Related Links Please also let us know through Microsoft Platform Ready if and when you intend to build an application using the Windows Azure Platform. Or indeed if you already have (Well done). You will get access to some great benefits if you do (more on that in a future post). It also really helps us better understand the demand out there which directly impacts how we will plan the next six months of activities around the Windows Azure Platform. Visit Microsoft Platform Ready to tell us about your plans for your applications UK based? Interested in the Windows Azure Platform? Join http://ukazure.ning.com Get started with the Windows Azure Platform http://bit.ly/startazure

Read the article

Can't boot in Ubuntu after windows upgrade

- by VanceAnce

After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

Read the article

SQL Script to Assign All Items to ALL Sites with Dynamics GP

- by Ryan McBee

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When setting up new items within Microsoft Dynamics GP, you will often run into the error message below which reads “This site is not assigned to the selected item. Do you want to assign this site?” The fix is quite simple given that you simply click the Add button below which opens up the Item Quantities Maintenance window which you will hit the save button and proceed with the entry of your Sales Order or Purchase Order. If you have a lot of new items into GP and have just one Site ID setup, the best approach to assigning your items to a particular site is by going to the Site Maintenance Window which is located in Cards>>Inventory>>Site. Once you are in the window below, you can click the Assign button to assign Items to the Site selected. However, if you have you a lot of Sites and Items created, this can be quite a cumbersome and time consuming process. For that, I have created the following SQL Script below that Assigns all Items to all Site ID’s within Microsoft Dynamics GP 2010. declare @item varchar(100) , @loc varchar(100) , @ItemExist int DECLARE TablePositionCursor CURSOR FOR SELECT itemnmbr from IV00101 i OPEN TablePositionCursor FETCH NEXT FROM TablePositionCursor INTO @item WHILE (@@fetch_status <> -1) BEGIN DECLARE TablePositionCursor2 CURSOR FOR select locncode from IV40700 OPEN TablePositionCursor2 FETCH NEXT FROM TablePositionCursor2 INTO @loc WHILE (@@fetch_status <> -1) BEGIN SELECT @ItemExist = isnull(count(*), 0) FROM IV00102 where ITEMNMBR = @item and LOCNCODE = @loc if @ItemExist = 0 BEGIN insert into iv00102 values( @item ,@loc ,'' ,2 ,'' ,0 ,0 ,0 ,0 ,'01/01/1900' ,'' ,'01/01/1900' ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,'01/01/1900' ,'01/01/1900' ,'01/01/1900' ,'01/01/1900' ,0 ,'' ,'' ,'' ,1 ,0 ,0 ,1 ,0 ,0 ,1 ,2 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,1 ,0 ,0 ,0 ,3 ,0 ,0 ,0 ,'' ,'' ,'' ,'' ,'' ,'' ,'' ,'' ,1 ,1 ,'' ,1 ,1 ,0 ,1 ,1 ,1 ,0 ,0 ,0 ,0 ,0 ) END FETCH NEXT FROM TablePositionCursor2 INTO @loc END DEALLOCATE TablePositionCursor2 FETCH NEXT FROM TablePositionCursor INTO @item END DEALLOCATE TablePositionCursor The script below works just for GP 2010 since the columns in the IV00102 have changed from version to version. If you need it for prior versions, please email me and I will send it to you. Disclaimer: I tested this on limited data, if you find an issue or have a suggestion for improvement, please let me know and I will post the update here for everyone. This blog is provided "AS IS" with no warranties, and confers no rights.

Read the article

WPF: Running code when Window rendering is completed

- by Ilya Verbitskiy

WPF is full of surprises. It makes complicated tasks easier, but at the same time overcomplicates easy task as well. A good example of such overcomplicated things is how to run code when you’re sure that window rendering is completed. Window Loaded event does not always work, because controls might be still rendered. I had this issue working with Infragistics XamDockManager. It continued rendering widgets even when the Window Loaded event had been raised. Unfortunately there is not any “official” solution for this problem. But there is a trick. You can execute your code asynchronously using Dispatcher class. Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); This code should be added to your Window Loaded event handler. It is executed when all controls inside your window are rendered. I created a small application to prove this idea. The application has one window with a few buttons. Each button logs when it has changed its actual size. It also logs when Window Loaded event is raised, and, finally, when rendering is completed. Window’s layout is straightforward. 1: <Window x:Class="OnRendered.MainWindow" 2: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 3: xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 4: Title="Run the code when window rendering is completed." Height="350" Width="525" 5: Loaded="OnWindowLoaded"> 6: <Window.Resources> 7: <Style TargetType="{x:Type Button}"> 8: <Setter Property="Padding" Value="7" /> 9: <Setter Property="Margin" Value="5" /> 10: <Setter Property="HorizontalAlignment" Value="Center" /> 11: <Setter Property="VerticalAlignment" Value="Center" /> 12: </Style> 13: </Window.Resources> 14: <StackPanel> 15: <Button x:Name="Button1" Content="Button 1" SizeChanged="OnSizeChanged" /> 16: <Button x:Name="Button2" Content="Button 2" SizeChanged="OnSizeChanged" /> 17: <Button x:Name="Button3" Content="Button 3" SizeChanged="OnSizeChanged" /> 18: <Button x:Name="Button4" Content="Button 4" SizeChanged="OnSizeChanged" /> 19: <Button x:Name="Button5" Content="Button 5" SizeChanged="OnSizeChanged" /> 20: </StackPanel> 21: </Window> SizeChanged event handler simply traces that the event has happened. 1: private void OnSizeChanged(object sender, SizeChangedEventArgs e) 2: { 3: Button button = (Button)sender; 4: Trace.WriteLine("Size has been changed", button.Name); 5: } Window Loaded event handler is slightly more interesting. First it scheduler the code to be executed using Dispatcher class, and then logs the event. 1: private void OnWindowLoaded(object sender, RoutedEventArgs e) 2: { 3: Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); 4: Trace.WriteLine("Loaded", "Window"); 5: } As the result I had seen these trace messages. 1: Button5: Size has been changed 2: Button4: Size has been changed 3: Button3: Size has been changed 4: Button2: Size has been changed 5: Button1: Size has been changed 6: Window: Loaded 7: Rendering: DONE! You can find the solution in GitHub.

Read the article

A story of Murphy–my technical issues at TechDays Switzerland #chtd

- by Laurent Bugnion

I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

Read the article

What DX level does my graphics card support? Does it go to 11?

- by Daniel Moth

Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Keeping an Eye on Your Storage

- by Fatherjack

There are plenty of resources that advise you about looking for signs that your storage hardware is having problems. SQL Server Alerts for 823, 824 and 825 are covered here by Paul Randall of SQL Skills: http://www.sqlskills.com/blogs/paul/a-little-known-sign-of-impending-doom-error-825/ and here by me: https://www.simple-talk.com/blogs/2011/06/27/alerts-are-good-arent-they/. Now until very recently I wasn’t aware that there was a different way to track the 823 + 824 errors. It was by complete chance that I happened to be searching about in the msdb database when I found the suspect_pages table. Running a query against it I got zero rows. This, as it turns out is a good thing. Highlighting the table name and pressing F1 got me nowhere – Is it just me or does Books Online fail to load properly for no obvious reason sometimes? So I typed the table name into the search bar and got my local version of http://msdn.microsoft.com/en-us/library/ms174425.aspx. From that we get the following description: Contains one row per page that failed with a minor 823 error or an 824 error. Pages are listed in this table because they are suspected of being bad, but they might actually be fine. When a suspect page is repaired, its status is updated in the event_type column. So, in the table we would, on healthy hardware, expect to see zero rows but on disks that are having problems the event_type column would show us what is going on. Where there are suspect pages on the disk the rows would have an event_type value of 1, 2 or 3, where those suspect pages have been restored, repaired or deallocated by DBCC then the value would be 4, 5 or 7. Having this table means that we can set up SQL Monitor to check the status of our hardware as we can create a custom metric based on the query below: USE [msdb] go SELECT COUNT(*) FROM [dbo].[suspect_pages] AS sp All we need to do is set the metric to collect this value and set an alert to email when the value is not 1 and we are then able to let SQL Monitor take care of our storage. Note that the suspect_pages table does not have any updates concerning Error 825 which the links at the top of the page cover in more detail. I would suggest that you set SQL Monitor to alert on the suspect_pages table in addition to other taking other measures to look after your storage hardware and not have it as your only precaution. Microsoft actually pass ownership and administration of the suspect_pages table over to the database administrator (Manage the suspect_pages Table (SQL Server)) and in a surprising move (to me at least) advise DBAs to actively update and archive data in it. The table will only ever contain a maximum of 1000 rows and once full, new rows will not be added. Keeping an eye on this table is pretty important, although In my opinion, if you get to 1000 rows in this table and are not already waiting for new disks to be added to your server you are doing something wrong but if you have 1000 rows in there then you need to move data out quickly because you may be missing some important events on your server.

Read the article

Sunshine after the iCloud release?

- by Laila

"Why should I believe them? They're the ones that brought us MobileMe? It was not our finest hour, but we learned a lot." Steve Jobs June 6th 2011 Apple's new cloud service has been met with uncritical excitement by industry commentators. It is wonderful what a rename can do. Apple has had a 'cloud' offering for three years called MobileMe, successor to .MAC and iTools, so iCloud is now the fourth internet service Apple have attempted. If this had been Microsoft, there would have been catcalls all around the blogosphere. I'll admit that there is a lot more functionality announced for iCloud than MobileMe has ever managed to achieve, but then almost anything has more functionality than MobileMe. It's an expensive service (£120 a year in the UK, $90 in the states), launched as far back as June 9, 2008, that has delivered very little and suffered a string of technical problems; the documentation was mainly a community effort, built up gradually by the frustrated and angry users. It was supposed to synchronise PC Outlook calendars but couldn't manage Microsoft Exchange (Google could, of course). It used WebDAV to allow Windows users to attach to the filestore, but didn't document how to do it. The method for downloading and uploading files to the cloud-based filestore was ridiculously clunky. It allowed you to post photos on a public site, but forgot to include a way of deleting photos. I could go on with the list, but you can explore the many sites that have flourished to inhabit the support-vacuum left by Apple. MobileMe should have had all the bright new clever things announced for iCloud. Apple dropped the ball, and allowed services such as Flickr to fill the void. However, their PR skills are such that, a name-change later (the .ME.com email address remains), it has turned a rout into a victory, and hundreds of earnest bloggers have been extolling Apple's expertise in cloud matters. This must be frustrating for the other cloud providers who have quietly got the technology working right. I wish iCloud well, even though I resent the expensive mess they made of MobileMe. Apple promise that iCloud will sync files, apps, app data, and media across all the different iOS5 devices, Macs, and PCs. It also hopes to sync music across devices, but not video content. They've offered existing MobileMe users free use of the MobileMe service for a year as the product is morphed, and they will be able to transfer to iCloud when it is launched in the autumn. On June 30, 2012, MobileMe will die, and Apple's iWeb is also soon to join iTools and .MAC in the hereafter. So why get excited about iCloud? That all depends on the level of PC integration. Whereas iOS5 machines will be full participants in the new world of data-sharing (Sorry iPod Touch users) what about .NET libraries? There is talk of synchronising 'My Pictures' libraries with iOS5 and iMac machines, but little more detail as yet. Apple has a lot to prove with iCloud and anyone with actual experience of their past attempts to get into cloud services will be wary.

Read the article

The inevitable Hello World post!

- by brendonpage

Greetings to anyone reading this! This is my first of hopefully many posts. I would like to use this post to introduce myself and to let you know what to expect from this blog in future. Okay so a bit about myself. In case you missed the name of this blog, my name is Brendon Page! I am a Software Developer from South Africa and work for a small company who’s main focus is producing software for the kitchen cupboard industry, although from time to time we do produce custom solutions for other industries. I work in a small team of 3, including myself, and am fortunate enough to work from home! I have been involved in IT since 1996, which is when I got my first PC, and started working as a junior programmer in 2003. Outside of work I enjoy playing squash, PC Games and of course LANing with my friends. If I get any free time between all of that I will usually dedicate some of it to a personal project, these are mainly prototypes for an idea I have had or for something that could be useful at work. I was in 2 minds on whether to include a photo of myself. The reason for this was because while I was looking for a suitable photo to use, it dawned on me how much time I dedicate to pulling funny faces in photos! I also realized how little I shave, which I blame completely on working form home. So after much debate here I am, funny face, beard and all! Now that you know a bit about me lets move onto what expect from this blog. I work predominantly with Microsoft technologies so most if not all of my posts will be related to something Microsoft. Since most of my job entails Software Development you can expect a lot of posts which will deal with the .NET Framework. I am currently working on a large Silverlight project, so my first few posts will be targeted at in that direction. I will be striving to make the content of my posts as useful as possible from both an explanation and code perspective, I aim to include a working solution for every post, which I will put up on my skydrive for download. Here is what I have planned for my next few posts: Where did my session variables go? Here I will take you through the lessons I learnt the hard way about the ASP.NET session. I am not going to go into to much depth in this post, as there is already a lot of information available on it. I mainly want to cover it in an effort to keep the scope creep of my posts to a minimum, some the solutions I upload will use it and I would like to have a post that I can reference to explain why I am doing something a certain way. Uploading files through SIlverlight Again there is a lot of existing information on this topic, so I wont be going into to much depth, but I will be using the solution from this as a base for my next post. Generating and Displaying DeepZoom images dynamically in Silverlight Well the title pretty much speaks for it’s self on this one. As I mentioned I will be building off the solution that I create in my ‘Uploading files through Silverlight’ post. Securing DeepZoom images using a custom implementation of the MultiScaleTileSource In this post I will look at the privacy issue surrounding the default usage of DeepZoom images in Silverlight and how to overcome it. This makes the use of DeepZoom in privacy conscious applications more viable. Thanks to anyone who actually read this post! I look forward to producing more which will hopefully be helpful to you.

Read the article

saving and retrieving a text file in java?

- by user3319432

import java.sql. ; import java.awt.; import javax.swing.; import java.awt.event.; public class saving extends JFrame implements ActionListener{ JTextField edpno=new JTextField(10); JLabel l0= new JLabel ("EDP Number: "); JComboBox fname = new JComboBox(); JLabel l1= new JLabel("First Name: "); JTextField lname= new JTextField(20); JLabel l2= new JLabel("Last Name: "); // JTextField contno= new JTextField(20); // JLabel l3= new JLabel("Contact Number: "); JComboBox contno = new JComboBox(); JLabel l3 = new JLabel ("Contact Number: "); JButton bOK = new JButton("Save"); JButton bRetrieve = new JButton("Retrieve"); private ImageIcon icon; JPanel C=new JPanel(){ protected void paintComponent(Graphics g){ g.drawImage(icon.getImage(),0,0,null); super.paintComponent(g); } }; public Search Record (){ icon=new ImageIcon("images/canres.png"); C.setOpaque(false); C.setLayout(new GridLayout(5,2,4,4)); setTitle("Search Record"); C.add (l0); C.add (edpno); edpno.addActionListener(this); C.add (l1); C.add (fname); fname.setForeground(Color.BLUE); fname.setFont(new Font(" ", Font.BOLD,15)); C.add (l2); C.add (lname); C.add (l3); C.add (contno); contno.setForeground(Color.BLUE); contno.setFont(new Font(" ", Font.BOLD,15)); C.add(bOK); bOK.addActionListener(this); C.add (bRetrieve); bRetrieve.addActionListener(this); bOK.setBackground(Color.white); bRetrieve.setBackground(Color.white); } public void saverecord(){ try{ //Connect to the Database Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); String path ="jdbc:odbc:;DRIVER=Microsoft Access Driver (*.mdb);DBQ=Database/roomassign.mdb"; String DBPassword =""; String DBUserName =""; Connection con = DriverManager.getConnection(path,"",""); Statement s = con.createStatement(); s.executeQuery("select firstname, Lastname, contact number from name WHERE edpno ='"+edpno.getText()+"'"); ResultSet rs = s.getResultSet(); ResultSetMetaData md = rs.getMetaData(); while(rs.next()) { fname.setSelectedItem(rs.getString(1)); lname.setText(rs.getString(2)); contno.setSelectedItem(rs.getString(3)); // crs.setSelectedItem(rs.getString(4)); } s.close(); con.close(); } catch(Exception Q) { JOptionPane.showMessageDialog(this,Q); } } public void SaveRecord(){ try{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); String path = "jdbc:odbc:;DRIVER=Microsoft Access Driver (*.mdb);DBQ=Database/roomassign.mdb"; String DBPassword =""; String DBUsername =""; Connection con = DriverManager.getConnection(path,"",""); Statement s = con.createStatement(); String sql = "UPDATE rooms SET Firstname='"+fname.getSelectedItem()+"',Lastname='"+lname.getText()+"',Contactnumber='"+contno.getSelectedItem()+"' WHERE '"+edpno.getText()+"'=edpno"; s.executeUpdate(sql); JOptionPane.showMessageDialog(this,"New room Record has been successfully saved"); dispose(); s.close(); con.close(); } catch(Exception Mismatch){ JOptionPane.showMessageDialog(this,Mismatch); } } public void actionPerformed (ActionEvent ako){ if (ako.getSource() == bRetrieve){ dispose(); } else if (ako.getSource() == bOK){ SaveRecord(); } } public static void main (String [] awtsave){ new Search(); } }

Read the article

Give a session on C++ AMP – here is how

- by Daniel Moth

Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads. "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

PASS Summit 2012: keynote and Mobile BI announcements #sqlpass

- by Marco Russo (SQLBI)

Today at PASS Summit 2012 there have been several announcements during the keynote. Moreover, other news have not been highlighted in the keynote but are equally if not more important for the BI community. Let’s start from the big news in the keynote (other details on SQL Server Blog): Hekaton: this is the codename for in-memory OLTP technology that will appear (I suppose) in the next release of the SQL Server relational engine. The improvement in performance and scalability is impressive and it enables new scenarios. I’m curious to see whether it can be used also to improve ETL performance and how it differs from using SSD technology. Updates on Columnstore: In the next major release of SQL Server the columnstore indexes will be updatable and it will be possible to create a clustered index with Columnstore index. This is really a great news for near real-time reporting needs! Polybase: in 2013 it will debut SQL Server 2012 Parallel Data Warehouse (PDW), which will include the Polybase technology. By using Polybase a single T-SQL query will run queries across relational data and Hadoop data. A single query language for both. Sounds really interesting for using BigData in a more integrated way with existing relational databases. And, of course, to load a data warehouse using BigData, which is the ultimate goal that we all BI Pro have, right? SQL Server 2012 SP1: the Service Pack 1 for SQL Server 2012 is available now and it enable the use of PowerPivot for SharePoint and Power View on a SharePoint 2013 installation with Excel 2013. Power View works with Multidimensional cube: the long-awaited feature of being able to use PowerPivot with Multidimensional cubes has been shown by Amir Netz in an amazing demonstration during the keynote. The interesting thing is that the data model behind was based on a many-to-many relationship (something that is not fully supported by Power View with Tabular models). Another interesting aspect is that it is Analysis Services 2012 that supports DAX queries run on a Multidimensional model, enabling the use of any future tool generating DAX queries on top of a Multidimensional model. There are still no info about availability by now, but this is *not* included in SQL Server 2012 SP1. So what about Mobile BI? Well, even if not announced during the keynote, there is a dedicated session on this topic and there are very important news in this area: iOS, Android and Microsoft mobile platforms: the commitment is to get data exploration and visualization capabilities working within June 2013. This should impact at least Power View and SharePoint/Excel Services. This is the type of UI experience we are all waiting for, in order to satisfy the requests coming from users and customers. The important news here is that native applications will be available for both iOS and Windows 8 so it seems that Android will be supported initially only through the web. Unfortunately we haven’t seen any demo, so it’s not clear what will be the offline navigation experience (and whether there will be one). But at least we know that Microsoft is working on native applications in this area. I’m not too surprised that HTML5 is not the magic bullet for all the platforms. The next PASS Business Analytics conference in 2013 seems a good place to see this in action, even if I hope we don’t have to wait other six months before seeing some demo of native BI applications on mobile platforms! Viewing Reporting Services reports on iPad is supported starting with SQL Server 2012 SP1, which has been released today. This is another good reason to install SP1 on SQL Server 2012. If you are at PASS Summit 2012, come and join me, Alberto Ferrari and Chris Webb at our book signing event tomorrow, Thursday 8 2012, at the bookstore between 12:00pm and 12:30pm, or follow one of our sessions!

Read the article

Asynchrony in C# 5 (Part I)

- by javarg

I’ve been playing around with the new Async CTP preview available for download from Microsoft. It’s amazing how language trends are influencing the evolution of Microsoft’s developing platform. Much effort is being done at language level today than previous versions of .NET. In these post series I’ll review some major features contained in this release: Asynchronous functions TPL Dataflow Task based asynchronous Pattern Part I: Asynchronous Functions This is a mean of expressing asynchronous operations. This kind of functions must return void or Task/Task<> (functions returning void let us implement Fire & Forget asynchronous operations). The two new keywords introduced are async and await. async: marks a function as asynchronous, indicating that some part of its execution may take place some time later (after the method call has returned). Thus, all async functions must include some kind of asynchronous operations. This keyword on its own does not make a function asynchronous thought, its nature depends on its implementation. await: allows us to define operations inside a function that will be awaited for continuation (more on this later). Async function sample: Async/Await Sample async void ShowDateTimeAsync() { while (true) { var client = new ServiceReference1.Service1Client(); var dt = await client.GetDateTimeTaskAsync(); Console.WriteLine("Current DateTime is: {0}", dt); await TaskEx.Delay(1000); } } The previous sample is a typical usage scenario for these new features. Suppose we query some external Web Service to get data (in this case the current DateTime) and we do so at regular intervals in order to refresh user’s UI. Note the async and await functions working together. The ShowDateTimeAsync method indicate its asynchronous nature to the caller using the keyword async (that it may complete after returning control to its caller). The await keyword indicates the flow control of the method will continue executing asynchronously after client.GetDateTimeTaskAsync returns. The latter is the most important thing to understand about the behavior of this method and how this actually works. The flow control of the method will be reconstructed after any asynchronous operation completes (specified with the keyword await). This reconstruction of flow control is the real magic behind the scene and it is done by C#/VB compilers. Note how we didn’t use any of the regular existing async patterns and we’ve defined the method very much like a synchronous one. Now, compare the following code snippet in contrast to the previuous async/await: Traditional UI Async void ComplicatedShowDateTime() { var client = new ServiceReference1.Service1Client(); client.GetDateTimeCompleted += (s, e) => { Console.WriteLine("Current DateTime is: {0}", e.Result); client.GetDateTimeAsync(); }; client.GetDateTimeAsync(); } The previous implementation is somehow similar to the first shown, but more complicated. Note how the while loop is implemented as a chained callback to the same method (client.GetDateTimeAsync) inside the event handler (please, do not do this in your own application, this is just an example). How it works? Using an state workflow (or jump table actually), the compiler expands our code and create the necessary steps to execute it, resuming pending operations after any asynchronous one. The intention of the new Async/Await pattern is to let us think and code as we normally do when designing and algorithm. It also allows us to preserve the logical flow control of the program (without using any tricky coding patterns to accomplish this). The compiler will then create the necessary workflow to execute operations as the happen in time.

Read the article

Running Powershell from within SharePoint

- by Norgean

Just because something is a daft idea, doesn't mean it can't be done. We sometimes need to do some housekeeping - like delete old files or list items or… yes, well, whatever you use Powershell for in a SharePoint world. Or it could be that your solution has "issues" for which you have Powershell solutions, but not the budget to transform into proper bug fixes. So you create a "how to" for the ITPro guys. Idea: What if we keep the scripts in a list, and have SharePoint execute the scripts on demand? An announcements list (because of the multiline body field). Warning! Let us be clear. This list needs to be locked down; if somebody creates a malicious script and you run it, I cannot help you. First; we need to figure out how to start Powershell scripts from C#. Hit teh interwebs and the Googlie, and you may find jpmik's post: http://www.codeproject.com/Articles/18229/How-to-run-PowerShell-scripts-from-C. (Or MS' official answer at http://msdn.microsoft.com/en-us/library/ee706563(v=vs.85).aspx) public string RunPowershell(string powershellText, SPWeb web, string param1, string param2) { // Powershell ~= RunspaceFactory - i.e. Create a powershell context var runspace = RunspaceFactory.CreateRunspace(); var resultString = new StringBuilder(); try { // load the SharePoint snapin - Note: you cannot do this in the script itself (i.e. add-pssnapin etc does not work) PSSnapInException snapInError; runspace.RunspaceConfiguration.AddPSSnapIn("Microsoft.SharePoint.PowerShell", out snapInError); runspace.Open(); // set a web variable. runspace.SessionStateProxy.SetVariable("webContext", web); // and some user defined parameters runspace.SessionStateProxy.SetVariable("param1", param1); runspace.SessionStateProxy.SetVariable("param2", param2); var pipeline = runspace.CreatePipeline(); pipeline.Commands.AddScript(powershellText); // add a "return" variable pipeline.Commands.Add("Out-String"); // execute! var results = pipeline.Invoke(); // convert the script result into a single string foreach (PSObject obj in results) { resultString.AppendLine(obj.ToString()); } } finally { // close the runspace runspace.Close(); } // consider logging the result. Or something. return resultString.ToString(); } Ok. We've written some code. Let us test it. var runner = new PowershellRunner(); runner.RunPowershellScript(@" $web = Get-SPWeb 'http://server/web' # or $webContext $web.Title = $param1 $web.Update() $web.Dispose() ", null, "New title", "not used"); Next step: Connect the code to the list, or more specifically, have the code execute on one (or several) list items. As there are more options than readers, I'll leave this as an exercise for the reader. Some alternatives: Create a ribbon button that calls RunPowershell with the body of the selected itemsAdd a layout pageSpecify list item from query string (possibly coupled with content editor webpart with html that links directly to this page with querystring)WebpartListing with an "execute" columnList with multiselect and an execute button Etc!Now that you have the code for executing powershell scripts, you can easily expand this into a timer job, which executes scripts at regular intervals. But if the previous solution was dangerous, this is even worse - the scripts will usually be run with one of the admin accounts, and can do pretty much anything...One more thing... Note that as this is running "consoleless" calls to Write-Host will fail. Two solutions; remove all output, or check if the script is run in a console-window or not. if ($host.Name -eq "ConsoleHost") { Write-Host 'If I agreed with you we'd both be wrong' }

Read the article

PowerShell Script To Find Where SharePoint 2007 Features Are Activated

- by Brian T. Jackett

Recently I posted a script to find where SharePoint 2010 Features Are Activated. I built the original version to use SharePoint 2010 PowerShell commandlets as that saved me a number of steps for filtering and gathering features at each level. If there was ever demand for a 2007 version I could modify the script to handle that by using the object model instead of commandlets. Just the other week a fellow SharePoint PFE Jason Gallicchio had a customer asking about a version for SharePoint 2007. With a little bit of work I was able to convert the script to work against SharePoint 2007. Solution Below is the converted script that works against a SharePoint 2007 farm. Note: There appears to be a bug with the 2007 version that does not give accurate results against a SharePoint 2010 farm. I ran the 2007 version against a 2010 farm and got fewer results than my 2010 version of the script. Discussing with some fellow PFEs I think the discrepancy may be due to sandboxed features, a new concept in SharePoint 2010. I have not had enough time to test or confirm. For the time being only use the 2007 version script against SharePoint 2007 farms and the 2010 version against SharePoint 2010 farms. Note: This script is not optimized for medium to large farms. In my testing it took 1-3 minutes to recurse through my demo environment. This script is provided as-is with no warranty. Run this in a smaller dev / test environment first. 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param( [Parameter(position = 1, valueFromPipeline=$true)] [string] $Identity )#end param Begin { # load SharePoint assembly to access object model [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") # declare empty array to hold results. Will add custom member for Url to show where activated at on objects returned from Get-SPFeature. $results = @() $params = @{} } Process { if([string]::IsNullOrEmpty($Identity) -eq $false) { $params = @{Identity = $Identity} } # create hashtable of farm features to lookup definition ids later $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local # check farm features $results += ($farm.FeatureDefinitions | Where-Object {$_.Scope -eq "Farm"} | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} | % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value ([string]::Empty) -PassThru} | Select-Object -Property Scope, DisplayName, Id, Url) # check web application features $contentWebAppServices = $farm.services | ? {$_.typename -like "Windows SharePoint Services Web Application"} foreach($webApp in $contentWebAppServices.WebApplications) { $results += ($webApp.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} | % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $webApp.GetResponseUri(0).AbsoluteUri -PassThru} | Select-Object -Property Scope, DisplayName, Id, Url) # check site collection features in current web app foreach($site in ($webApp.Sites)) { $results += ($site.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} | % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $site.Url -PassThru} | Select-Object -Property Scope, DisplayName, Id, Url) # check site features in current site collection foreach($web in ($site.AllWebs)) { $results += ($web.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} | % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $web.Url -PassThru} | Select-Object -Property Scope, DisplayName, Id, Url) $web.Dispose() } $site.Dispose() } } } End { $results } } #end Get-SPFeatureActivated Get-SPFeatureActivated Conclusion I have posted this script to the TechNet Script Repository (click here). As always I appreciate any feedback on scripts. If anyone is motivated to run this 2007 version script against a SharePoint 2010 to see if they find any differences in number of features reported versus what they get with the 2010 version script I’d love to hear from you. -Frog Out

Read the article

We have our standards, and we need them

- by Tony Davis

The presenter suddenly broke off. He was midway through his section on how to apply to the relational database the Continuous Delivery techniques that allowed for rapid-fire rounds of development and refactoring, while always retaining a “production-ready” state. He sighed deeply and then launched into an astonishing diatribe against Database Administrators, much of his frustration directed toward Oracle DBAs, in particular. In broad strokes, he painted the picture of a brave new deployment philosophy being frustratingly shackled by the relational database, and by especially by the attitudes of the guardians of these databases. DBAs, he said, shunned change and “still favored tools I’d have been embarrassed to use in the ’80′s“. DBAs, Oracle DBAs especially, were more attached to their vendor than to their employer, since the former was the primary source of their career longevity and spectacular remuneration. He contended that someone could produce the best IDE or tool in the world for Oracle DBAs and yet none of them would give a stuff, unless it happened to come from the “mother ship”. I sat blinking in astonishment at the speaker’s vehemence, and glanced around nervously. Nobody in the audience disagreed, and a few nodded in assent. Although the primary target of the outburst was the Oracle DBA, it made me wonder. Are we who work with SQL Server, database professionals or merely SQL Server fanbois? Do DBAs, in general, have an image problem? Is it a good career-move to be seen to be holding onto a particular product by the whites of our knuckles, to the exclusion of all else? If we seek a broad, open-minded, knowledge of our chosen technology, the database, and are blessed with merely mortal powers of learning, then we like standards. Vendors of RDBMSs generally don’t conform to standards by instinct, but by customer demand. Microsoft has made great strides to adopt the international SQL Standards, where possible, thanks to considerable lobbying by the community. The implementation of Window functions is a great example. There is still work to do, though. SQL Server, for example, has an unusable version of the Information Schema. One cast-iron rule of any RDBMS is that we must be able to query the metadata using the same language that we use to query the data, i.e. SQL, and we do this by running queries against the INFORMATION_SCHEMA views. Developers who’ve attempted to apply a standard query that works on MySQL, or some other database, but doesn’t produce the expected results on SQL Server are advised to shun the Standards-based approach in favor of the vendor-specific one, using the catalog views. The argument behind this is sound and well-documented, and of course we all use those catalog views, out of necessity. And yet, as database professionals, committed to supporting the best databases for the business, whatever they are now and in the future, surely our heart should sink somewhat when we advocate a vendor specific approach, to a developer struggling with something as simple as writing a guard clause. And when we read messages on the Microsoft documentation informing us that we shouldn’t rely on INFORMATION_SCHEMA to identify reliably the schema of an object, in SQL Server!

Read the article

Hyper-V for Developers Part 1 Internal Networks

Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14. This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events. ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land. Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down. This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again. Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple. An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal. When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other. Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine. In order to do this, the machine needs to have a virtual network adapter. If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane. Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time. Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx. This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18. DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each. In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines. Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Perspective Is Everything

- by juanlarios

Sitting on a window seat on my way back from Seattle I looked out the window and saw the large body of water. I was reminded of childhood memories of running as hard as I could through burning hot sand with the anticipation of the splash of the ocean. Looking out the window the water appeared like a sheet draped over land. I couldn’t help but ponder how perspective changes everything. Over the last several days I had a chance to attend the MVP Summit in Redmond. I had a great time with fellow MVP’s and the SharePoint Product Group. Although I can’t say much about what was discussed and what is coming in the future, I want to share some realizations I had while experiencing the MVP summit. The SharePoint Product is ever-improving, full of innovation but also a reactionary embodiment of MVP, client and market feedback. There are several features that come to mind that clients complain about where I have felt helpless in informing them that the features are not as mature as they would like it. Together, we figure out a way to make it work and deal with the limitations. It became clear that there are features that have taken a different purpose in the market place from the original vision. The SP Product group is working hard to react to these changes in vision and make SharePoint better for real life implementations. It is easy to think that SharePoint should be all things to all people. In reality there are products that are very detailed in specific composites, they do this one thing well but severely lack in other areas. Its easy sometimes to say, “What was Microsoft thinking with this feature?” the Product group is doing all they can to make the moving pieces better and dealing with challenges with having all of them work together. Sometimes the features don’t fully embody the vision because of the many challenges, but trust me when I say the product group is really focused on delivery and innovation. As I was speaking with a fellow MVP throughout the session, we spoke about the iPad 2(ironically announced this past week during the MVP summit) and Microsoft’s possible product answer; I realized the days of reactionary products from MS is over. There are many users that will remember Vista and the painful execution in that product, but there has been a lot of success in Windows 7. There was no rush for a reactionary answer to the Nintendo Wii, as a result a ground breaking and game changing product was brought to market, the XBOX –Kinect! I can’t say much here, but it’s safe to say, expect innovation, and execution of products and technology that will change the market instead of react to them! There are many things I learned and I would love to share that have to do with perspective, technology, etc… but this is far as I can go in details. This might not be new to you or specifically the message that was shared during the summit. These are just my impressions of the event and the spirit of future vision. Great things ahead!

Search Results

Search found 18378 results on 736 pages for 'microsoft communicator'.

Page 394/736 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401 | Next Page >

- by Chris Gardner

- by THE

- by mary.keane

- by subodhnpushpak

- by Laurent Bugnion

- by Daniel Moth

- by Eric Nelson

- by VanceAnce

- by Ryan McBee

- by Ilya Verbitskiy

- by Laurent Bugnion

- by Daniel Moth

- by Fatherjack

- by Laila

- by brendonpage

- by user3319432

- by Daniel Moth

- by Marco Russo (SQLBI)

- by javarg

- by Norgean

- by Brian T. Jackett

- by Tony Davis

- by juanlarios

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401 | Next Page >