login attempts - Page 395

Hide subdomain AND subdirectory using mod_rewrite?

- by Jeremy

I am trying to hide a subdomain and subdirectory from users. I know it may be easier to use a virtual host but will that not change direct links pointing at our site? The site currently resides at http://mail.ctrc.sk.ca/cms/ I want www.ctrc.sk.ca and ctrc.sk.ca to access this folder but still display www.ctrc.sk.ca. If that makes any sense. Here is what our current .htaccess file looks like, we are using Joomla so there already a few rules set up. Help is appreciated. # Helicon ISAPI_Rewrite configuration file # Version 3.1.0.78 ## # @version $Id: htaccess.txt 14401 2010-01-26 14:10:00Z louis $ # @package Joomla # @copyright Copyright (C) 2005 - 2010 Open Source Matters. All rights reserved. # @license http://www.gnu.org/copyleft/gpl.html GNU/GPL # Joomla! is Free Software ## ##################################################### # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. # ##################################################### ## Can be commented out if causes errors, see notes above. #Options +FollowSymLinks # # mod_rewrite in use RewriteEngine On ########## Begin - Rewrite rules to block out some common exploits ## If you experience problems on your site block out the operations listed below ## This attempts to block the most common type of exploit `attempts` to Joomla! # ## Deny access to extension xml files (uncomment out to activate) #<Files ~ "\.xml$"> #Order allow,deny #Deny from all #Satisfy all #</Files> ## End of deny access to extension xml files RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*$.*$ [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] # ########## End - Rewrite rules to block out some common exploits # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root) #RewriteBase / ########## Begin - Joomla! core SEF Section # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # ########## End - Joomla! core SEF Section EDIT Yes, mail.ctrc.sk.ca/cms/ is the root directory. Currently the DNS redirects from ctrc.sk.ca and www.ctrc.sk.ca to mail.ctrc.sk.ca/cms. However when it redirects the user still sees the mail.ctrc.sk.ca/cms/ url and I want them to only see www.ctrc.sk.ca.

Read the article

File copying utility like rsync with error handling like ddrescue, for data recovery from a hard drive with bad sectors or hardware failure

- by purefusion

I have a hard drive with either bad blocks or sectors that are failing to read due to potential mechanical issues, such as a bad disk head, bad motor, or some other issue that is causing the hard drive to read data excruciatingly slowly and with lots of read errors. I'm seeing an average of 50 KB/sec, with some reads dropping below 10 KB/sec, and frequently it gets stuck on a file or sector altogether, usually for quite a long time—from 2-10 minutes or more (when using rsync, before it times out). Speed seems to vary wildly, and it gets stuck on files a lot, and when it finally gets "unstuck" it only seems to last for a short burst before it gets stuck again. The drive is also very quiet with only an occasional sound of files copying (usually when it gets stuck/unstuck for a brief time, before getting stuck again). Thus, there are none of those evil sounds that are normally associated with HDD death. Someone suggested that the problems sounded like they might be caused by a misaligned disk head, which requires a lot of re-reads before it finally reads data with success. Sounds plausible, but I digress... Anyway, the problem with rsync is that it seems to have no decent error handling support. Obviously, it wasn't meant for use in recovering data from failing hard drives, but all the so-called "data recovery" utilities out there that are meant for such use usually focus on recovery of deleted files or messed up partitions, rather than copying files off dying hard drives. Deleted file recovery is not what I need, obviously, so perhaps you can understand my disappointment in not being able to find what I'm after yet. Naturally, this is where you'd probably say "You should use ddrescue!" Well, that's all fine and dandy, but I've already got most of the data backed up, so I just want to recover certain files. I'm not concerned with trying to recover a full partition block-by-block as ddrescue does. I am only interested in rescuing just specific files and directories. Ideally, what I'd like is some sort of cross between rsync and ddrescue: something that lets me specify source and destination as directories of normal files like rsync (rather than two full partitions as ddrescue requires), with a way to skip files with errors in an initial run, and then allows me to attempt recovery of those files with errors in a later run (with a slightly altered command, of course), perhaps even offering an option to specify the number of retry attempts ...just like how ddrescue works with blocks, only I want a utility that works with specific files/directories like rsync does. So am I daydreaming here, or does something out there exist that can do this? Or, maybe even a way to make rsync or ddrescue work in such a way? I'm really open to whatever solutions might work, so long as they let me choose which files I want to "rescue", and can skip files with errors in the initial run, and try/retry those errors again later. So far I've tried rsync with the following options, but it often gets stuck on a file for longer than the timeout, and ideally I'd just like it to move on to the next file and come back later to the files it gets stuck on. I don't think that's possible though. Anyway, here's what I've been using up till now: rsync -avP --stats --block-size=512 --timeout=600 /path/to/source/* /path/to/destination/

Read the article

Distributed and/or Parallel SSIS processing

- by Jeff

Background: Our company hosts SaaS DSS applications, where clients provide us data Daily and/or Weekly, which we process & merge into their existing database. During business hours, load in the servers are pretty minimal as it's mostly users running simple pre-defined queries via the website, or running drill-through reports that mostly hit the SSAS OLAP cube. I manage the IT Operations Team, and so far this has presented an interesting "scaling" issue for us. For our daily-refreshed clients, the server is only "busy" for about 4-6 hrs at night. For our weekly-refresh clients, the server is only "busy" for maybe 8-10 hrs per week! We've done our best to use some simple methods of distributing the load by spreading the daily clients evenly among the servers such that we're not trying to process daily clients back-to-back over night. But long-term this scaling strategy creates two notable issues. First, it's going to consume a pretty immense amount of hardware that sits idle for large periods of time. Second, it takes significant Production Support over-head to basically "schedule" the ETL such that they don't over-lap, and move clients/schedules around if they out-grow the resources on a particular server or allocated time-slot. As the title would imply, one option we've tried is running multiple SSIS packages in parallel, but in most cases this has yielded VERY inconsistent results. The most common failures are DTExec, SQL, and SSAS fighting for physical memory and throwing out-of-memory errors, and ETLs running 3,4,5x longer than expected. So from my practical experience thus far, it seems like running multiple ETL packages on the same hardware isn't a good idea, but I can't be the first person that doesn't want to scale multiple ETLs around manual scheduling, and sequential processing. One option we've considered is virtualizing the servers, which obviously doesn't give you any additional resources, but moves the resource contention onto the hypervisor, which (from my experience) seems to manage simultaneous CPU/RAM/Disk I/O a little more gracefully than letting DTExec, SQL, and SSAS battle it out within Windows. Question to the forum: So my question to the forum is, are we missing something obvious here? Are there tools out there that can help manage running multiple SSIS packages on the same hardware? Would it be more "efficient" in terms of parallel execution if instead of running DTExec, SQL, and SSAS same machine (with every machine running that configuration), we run in pairs of three machines with SSIS running on one machine, SQL on another, and SSAS on a third? Obviously that would only make sense if we could process more than the three ETL we were able to process on the machine independently. Another option we've considered is completely re-architecting our SSIS package to have one "master" package for all clients that attempts to intelligently chose a server based off how "busy" it already is in terms of CPU/Memory/Disk utilization, but that would be a herculean effort, and seems like we're trying to reinvent something that you would think someone would sell (although I haven't had any luck finding it). So in summary, are we missing an obvious solution for this, and does anyone know if any tools (for free or for purchase, doesn't matter) that facilitate running multiple SSIS ETL packages in parallel and on multiple servers? (What I would call a "queue & node based" system, but that's not an official term). Ultimately VMWare's Distributed Resource Scheduler addresses this as you simply run a consistent number of clients per VM that you know will never conflict scheduleing-wise, then leave it up to VMWare to move the VMs around to balance out hardware usage. I'm definitely not against using VMWare to do this, but since we're a 100% Microsoft app stack, it seems like -someone- out there would have solved this problem at the application layer instead of the hypervisor layer by checking on resource utilization at the OS, SQL, SSAS levels. I'm open to ANY discussion on this, and remember no suggestion is too crazy or radical! :-) Right now, VMWare is the only option we've found to get away from "manually" balancing our resources, so any suggestions that leave us on a pure Microsoft stack would be great. Thanks guys, Jeff

Read the article

Backup, Migrate or Clone Failing CentOS 4 (LVM)

- by Hegelworm

I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks. Update: Thanks for your responses so far - it's much appreciated and makes me feel a little more confident when I can double-check things here. I had the idea of doing a fresh install of CentOS (from the original disk) on the new drive so the partitions and LVM were all set up correctly (after disconnecting my source drive to prevent painful mistakes). I then booted into rescue mode from the same CD, and, to avoid a conflicting label, changed the /boot partition's label using e2label to /bootnew. I then changed the VolGroup name using lvm vgrename from VolGroup00 to VolGroup001. I could then boot with both drives in. After mounting the new drive (via its VolGroup001 alias) into /newhd, I rsync-ed over everything I could to the new drive, using -avr switches and backslashes. Like mentioned here. I then disconnected my original source drive again, booted from the liveCD again, changed back the boot partition label from /bootnew to /boot using e2label and then renamed the VolGroup back to VolGroup00. I then rebooted and it went through the familiar start-up routine only to not find a host of files in proc, usr, lib, var etc. The boot did complete but there were lots of red 'FAILS'. I could log in with my existing creds, but the network was kaput, I couldn't startX (desktop GUI) and there were also a few (a lot) of error messages pertaining to iptables. Back to square one. I naively thought I'd nailed it. Shall I just buy a bigger hard drive and attempt the dd route? I've read that this can mess with LVM setups and there's the added risk of working on two unmounted drives at once with a low-level tool. Thanks again.

Read the article

Multi-tenant ASP.NET MVC – Introduction

- by zowens

I’ve read a few different blogs that talk about multi-tenancy and how to resolve some of the issues surrounding multi-tenancy. What I’ve come to realize is that these implementations overcomplicate the issues and give only a muddy implementation! I’ve seen some really illogical code out there. I have recently been building a multi-tenancy framework for internal use at eagleenvision.net. Through this process, I’ve realized a few different techniques to make building multi-tenant applications actually quite easy. I will be posting a few different entries over the issue and my personal implementation. In this first post, I will discuss what multi-tenancy means and how my implementation will be structured. So what’s the problem? Here’s the deal. Multi-tenancy is basically a technique of code-reuse of web application code. A multi-tenant application is an application that runs a single instance for multiple clients. Here the “client” is different URL bindings on IIS using ASP.NET MVC. The problem with different instances of the, essentially, same application is that you have to spin up different instances of ASP.NET. As the number of running instances of ASP.NET grows, so does the memory footprint of IIS. Stack Exchange shifted its architecture to multi-tenancy March. As the blog post explains, multi-tenancy saves cost in terms of memory utilization and physical disc storage. If you use the same code base for many applications, multi-tenancy just makes sense. You’ll reduce the amount of work it takes to synchronize the site implementations and you’ll thank your lucky stars later for choosing to use one application for multiple sites. Multi-tenancy allows the freedom of extensibility while relying on some pre-built code. You’d think this would be simple. I have actually seen a real lack of reference material on the subject in terms of ASP.NET MVC. This is somewhat surprising given the number of users of ASP.NET MVC. However, I will certainly fill the void ;). Implementing a multi-tenant application takes a little thinking. It’s not straight-forward because the possibilities of implementation are endless. I have yet to see a great implementation of a multi-tenant MVC application. The only one that comes close to what I have in mind is Rob Ashton’s implementation (all the entries are listed on this page). There’s some really nasty code in there… something I’d really like to avoid. He has also written a library (MvcEx) that attempts to aid multi-tenant development. This code is even worse, in my honest opinion. Once I start seeing Reflection.Emit, I have to assume the worst :) In all seriousness, if his implementation makes sense to you, use it! It’s a fine implementation that should be given a look. At least look at the code. I will reference MvcEx going forward as a comparison to my implementation. I will explain why my approach differs from MvcEx and how it is better or worse (hopefully better). Core Goals of my Multi-Tenant Implementation The first, and foremost, goal is to use Inversion of Control containers to my advantage. As you will see throughout this series, I pass around containers quite frequently and rely on their use heavily. I will be using StructureMap in my implementation. However, you could probably use your favorite IoC tool instead. <RANT> However, please don’t be stupid and abstract your IoC tool. Each IoC is powerful and by abstracting the capabilities, you’re doing yourself a real disservice. Who in the world swaps out IoC tools…? No one!</RANT> (It had to be said.) I will outline some of the goodness of StructureMap as we go along. This is really an invaluable tool in my tool belt and simple to use in my multi-tenant implementation. The second core goal is to represent a tenant as easily as possible. Just as a dependency container will be a first-class citizen, so will a tenant. This allows us to easily extend and use tenants. This will also allow different ways of “plugging in” tenants into your application. In my implementation, there will be a single dependency container for a single tenant. This will enable isolation of the dependencies of the tenant. The third goal is to use composition as a means to delegate “core” functions out to the tenant. More on this later. Features In MvcExt, “Modules” are a code element of the infrastructure. I have simplified this concept and have named this “Features”. A feature is a simple element of an application. Controllers can be specified to have a feature and actions can have “sub features”. Each tenant can select features it needs and the other features will be hidden to the tenant’s users. My implementation doesn’t require something to be a feature. A controller can be common to all tenants. For example, (as you will see) I have a “Content” controller that will return the CSS, Javascript and Images for a tenant. This is common logic to all tenants and shouldn’t be hidden or considered a “feature”; Content is a core component. Up next My next post will be all about the code. I will reveal some of the foundation to the way I do multi-tenancy. I will have posts dedicated to Foundation, Controllers, Views, Caching, Content and how to setup the tenants. Each post will be in-depth about the issues and implementation details, while adhering to my core goals outlined in this post. As always, comment with questions of DM me on twitter or send me an email.

Read the article

This task is currently locked by a running workflow and cannot be edited. Limitation to both Nintex and SPD workflow

- by ybbest

Note, this post is from Nintex Forum here. These limitations apply to both SharePoint designer Workflow and Nintex Workflow as Nintex using the SharePoint workflow engine. The common cause that I experience is that ‘parent’ workflow is generating more than one task at once. This is common as you can have multiple approvers for certain approval process. You could also have workflow running when the task is created, one of the common scenario is you would like to set a custom column value in your approval task. For me this is huge limitation, as Nintex lover I really hope Nintex could solve this problem with Microsoft going forward. Introduction “This task is currently locked by a running workflow and cannot be edited” is a common message that is seen when an error occurs while the SharePoint workflow engine is processing a task item associated with a workflow. When a workflow processes a task normally, the following sequence of events is expected to occur: 1. The process begins. 2. The workflow places a ‘lock’ on the task so nothing else can change the values while the workflow is processing. 3. The workflow processes the task. 4. The lock is released when the task processing is finished. When the message is encountered, it usually indicates that an error occurred between step 2 and 4. As a result, the lock is never released. Therefore, the ‘task locked’ message is not an error itself, rather a symptom of another error – the ‘task locked’ message does not indicate what went wrong. In most cases, once this message is encountered, the workflow cannot be made to continue and must be terminated and started again. The following is a guide that can help troubleshoot the cause of these messages. Some initial observations to narrow down the potential causes are: Is the error consistent or intermittent? When the error is consistent, it will happen every time the workflow is run. When it is intermittent, it may happen regularly, but not every time. Does the error occur the first time the user tries to respond to a task, or do they respond and notice the workflow does not continue, and when they respond again the error occurs? If the message is present when the user first responds to the task, the issue would have occurred when the task was created. Otherwise, it would have occurred when the user attempted to respond to the task. Causes Modifying the task list A cause of this error appearing consistently the first time a user tries to respond to a task is a modification to the default task list schema. For example, changing the ‘Assigned to’ field in a task list to be a multiple selection will cause the behaviour. Deleting the workflow task then restoring it from the Recycle bin If you start a workflow, delete the workflow task then restore it from the Recycle Bin in SharePoint, the workflow will fail with the ‘task locked’ error. This is confirmed behaviour whether using a SharePoint Designer or a Nintex workflow. You will need to terminate the workflow and start it again. Parallel simultaneous responses A cause of this error appearing inconsistently is multiple users responding to tasks in parallel at the same time. In this scenario, one task will complete correctly and the other will not process. When the user tries again, the ‘task locked’ message will display. Nintex included a workaround for this issue in build 11000. In build 11000 and later, one of the users will receive a message on the task form when they attempt to respond, stating that they need to try again in a few moments. Additional processing on the task A cause of this error appearing consistently and inconsistently is having an additional system running on the items in the task list. Some examples include: a workflow running on the task list, an event receiver running on the task list or another automated process querying and updating workflow tasks. Note: This Microsoft help article (http://office.microsoft.com/en-us/sharepointdesigner/HA102376561033.aspx#5) explains creating a workflow that runs on the task list to update a field on the task. Our experience shows that this causes the ‘Task Locked’ issues when the ‘parent’ workflow is generating more than one task at once. Isolated system error If the error is a rare event, or a ‘one off’ event, then an isolated system error may have occurred. For example, if there is a database connectivity issue while the workflow is processing the task response, the task will lock. In this case, the user will respond to a task but the workflow will not continue. When they respond again, the ‘task locked’ message will display. In this case, there will be an error in the SharePoint ULS Logs at the time that the user originally responded. Temporary delay while workflow processes If the workflow is taking a long time to process after a user submits a task, they may notice and try to respond to the task again. They will see the task locked error, but after a number of attempts (or after waiting some time) the task response page eventually indicates the task has been responded to. In this case, nothing actually went wrong, and the error message gives an accurate indication of what is happening – the workflow temporarily locked the task while it was processing. This scenario may occur in a very large workflow, or after the SharePoint application pool has just started. Modifying the task via a web service with an invalid url If the Nintex Workflow web service is used to respond to or delegate a task, the site context part of the url must be a valid alternative access mapping url. For example, if you access the web service via the IP address of the SharePoint server, and the IP address is not a valid AAM, the task can become locked. The workflow has become stuck without any apparent errors This behaviour can occur as a result of a bug in the SharePoint 2010 workflow engine. If you do not have the August 2010 Cumulative Update (or later) for SharePoint, and your workflow uses delays, “Flexi-task”, State machine”, “Task Reminder” actions or variables, you could be affected. Check the SharePoint 2010 Updates site here: http://technet.microsoft.com/en-us/sharepoint/ff800847. The October CU is recommended http://support.microsoft.com/kb/2553031. The fix is described as “Consider the following scenario. You add a Delay activity to a workflow. Then, you set the duration for the Delay activity. You deploy the workflow in SharePoint Foundation 2010. In this scenario, the workflow is not resumed after the duration of the Delay activity”. If you find this is occurring in your environment, install the October CU, terminate all the running workflows affected and run them afresh. Investigative steps The first step to isolate the issue is to create a new task list on the site and configure the workflow to use it. Any customizations that were made to the original task list should not be made to the new task list. If the new task list eliminates the issue, then the cause can be attributed to the original task list or a change that was made to it. To change the task list that the workflow uses: In Workflow Designer select Settings -> Startup Options Then configure the task list as required If any of the scenarios above do not help, check the SharePoint logs for any messages with a category of ‘Workflow Infrastructure’. Conclusion The information in this article has been gathered from observations and investigations by Nintex. The sources of these issues are the underlying SharePoint workflow engine. This article will be updated if further causes are discovered. From <http://connect.nintex.com/forums/thread/6503.aspx>

Read the article

Soapi.CS : A fully relational fluent .NET Stack Exchange API client library

- by Sky Sanders

Soapi.CS for .Net / Silverlight / Windows Phone 7 / Mono as easy as breathing...: var context = new ApiContext(apiKey).Initialize(false); Question thisPost = context.Official .StackApps .Questions.ById(386) .WithComments(true) .First(); Console.WriteLine(thisPost.Title); thisPost .Owner .Questions .PageSize(5) .Sort(PostSort.Votes) .ToList() .ForEach(q=> { Console.WriteLine("\t" + q.Score + "\t" + q.Title); q.Timeline.ToList().ForEach(t=> Console.WriteLine("\t\t" + t.TimelineType + "\t" + t.Owner.DisplayName)); Console.WriteLine(); }); // if you can think it, you can get it. Output Soapi.CS : A fully relational fluent .NET Stack Exchange API client library 21 Soapi.CS : A fully relational fluent .NET Stack Exchange API client library Revision code poet Revision code poet Votes code poet Votes code poet Revision code poet Revision code poet Revision code poet Votes code poet Votes code poet Votes code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Votes code poet Comment code poet Revision code poet Votes code poet Revision code poet Revision code poet Revision code poet Answer code poet Revision code poet Revision code poet 14 SOAPI-WATCH: A realtime service that notifies subscribers via twitter when the API changes in any way. Votes code poet Revision code poet Votes code poet Comment code poet Comment code poet Comment code poet Votes lfoust Votes code poet Comment code poet Comment code poet Comment code poet Comment code poet Revision code poet Comment lfoust Votes code poet Revision code poet Votes code poet Votes lfoust Votes code poet Revision code poet Comment Dave DeLong Revision code poet Revision code poet Votes code poet Comment lfoust Comment Dave DeLong Comment lfoust Comment lfoust Comment Dave DeLong Revision code poet 11 SOAPI-EXPLORE: Self-updating single page JavaSript API test harness Votes code poet Votes code poet Votes code poet Votes code poet Votes code poet Comment code poet Revision code poet Votes code poet Revision code poet Revision code poet Revision code poet Comment code poet Revision code poet Votes code poet Comment code poet Question code poet Votes code poet 11 Soapi.JS V1.0: fluent JavaScript wrapper for the StackOverflow API Comment George Edison Comment George Edison Comment George Edison Comment George Edison Comment George Edison Comment George Edison Answer George Edison Votes code poet Votes code poet Votes code poet Votes code poet Revision code poet Revision code poet Answer code poet Comment code poet Revision code poet Comment code poet Comment code poet Comment code poet Revision code poet Revision code poet Votes code poet Votes code poet Votes code poet Votes code poet Comment code poet Comment code poet Comment code poet Comment code poet Comment code poet 9 SOAPI-DIFF: Your app broke? Check SOAPI-DIFF to find out what changed in the API Votes code poet Revision code poet Comment Dennis Williamson Answer Dennis Williamson Votes code poet Votes Dennis Williamson Comment code poet Question code poet Votes code poet About A robust, fully relational, easy to use, strongly typed, end-to-end StackOverflow API Client Library. Out of the box, Soapi provides you with a robust client library that abstracts away most all of the messy details of consuming the API and lets you concentrate on implementing your ideas. A few features include: A fully relational model of the API data set exposed via a fully 'dot navigable' IEnumerable (LINQ) implementation. Simply tell Soapi what you want and it will get it for you. e.g. "On my first question, from the author of the first comment, get the first page of comments by that person on any post" my.Questions.First().Comments.First().Owner.Comments.ToList(); (yes this is a real expression that returns the data as expressed!) Full coverage of the API, all routes and all parameters with an intuitive syntax. Strongly typed Domain Data Objects for all API data structures. Eager and Lazy Loading of 'stub' objects. Eager\Lazy loading may be disabled. When finer grained control of requests is desired, the core RouteMap objects may be leveraged to request data from any of the API paths using all available parameters as documented on the help pages. A rich Asynchronous implementation. A configurable request cache to reduce unnecessary network traffic and to simplify your usage logic. There is no need to go out of your way to be frugal. You may set a distinct cache duration for any particular route. A configurable request throttle to ensure compliance with the api terms of usage and to simplify your code in that you do not have to worry about and respond to 50X errors. The RequestCache and Throttled Queue are thread-safe, so can make as many requests as you like from as many threads as you like as fast as you like and not worry about abusing the api or having to write reams of management/compensation code. Configurable retry threshold that will, by default, make up to 3 attempts to retrieve a request before failing. Every request made by Soapi is properly formed and directed so most any http error will be the result of a timeout or other network infrastructure. A retry buffer provides a level of fault tolerance that you can rely on. An almost identical javascript library, Soapi.JS, and it's full figured big brother, Soapi.JS2, that will enable you to leverage your server cycles and bandwidth for only those tasks that require it and offload things like status updates to the client's browser. License Licensed GPL Version 2 license. Why is Soapi.CS GPL? Can I get an LGPL license for Soapi.CS? (hint: probably) Platforms .NET 3.5 .NET 4.0 Silverlight 3 Silverlight 4 Windows Phone 7 Mono Download Source code lives @ http://soapics.codeplex.com. Binary releases are forthcoming. codeplex is acting up again. get the source and binaries @ http://bitbucket.org/bitpusher/soapi.cs/downloads The source is C# 3.5. and includes projects and solutions for the following IDEs Visual Studio 2008 Visual Studio 2010 ModoDevelop 2.4 Documentation Full documentation is available at http://soapi.info/help/cs/index.aspx Sample Code / Usage Examples Sample code and usage examples will be added as answers to this question. Full API Coverage all API routes are covered Full Parameter Parity If the API exposes it, Soapi giftwraps it for you. Building a simple app with Soapi.CS - a simple app that gathers all traces of a user in the whole stackiverse. Fluent Configuration - Setting up a Soapi.ApiContext could not be easier Bulk Data Import - A tiny app that quickly loads a SQLite data file with all users in the stackiverse. Paged Results - Soapi.CS transparently handles multi-page operations. Asynchronous Requests - Soapi.CS provides a rich asynchronous model that is especially useful when writing api apps in Silverlight or Windows Phone 7. Caching and Throttling - how and why Apps that use Soapi.CS Soapi.FindUser - .net utility for locating a user anywhere in the stackiverse Soapi.Explore - The entire API at your command Soapi.LastSeen - List users by last access time Add your app/site here - I know you are out there ;-) if you are not comfortable editing this post, simply add a comment and I will add it. The CS/SL/WP7/MONO libraries all compile the same code and with the exception of environmental considerations of Silverlight, the code samples are valid for all libraries. You may also find guidance in the test suites. More information on the SOAPI eco-system. Contact This library is currently the effort of me, Sky Sanders (code poet) and can be reached at gmail - sky.sanders Any who are interested in improving this library are welcome. Support Soapi You can help support this project by voting for Soapi's Open Source Ad post For more information about the origins of Soapi.CS and the rest of the Soapi eco-system see What is Soapi and why should I care?

Read the article

Make your CHM Help Files show HTML5 and CSS3 content

- by Rick Strahl

The HTML Help 1.0 specification aka CHM files, is pretty old. In fact, it's practically ancient as it was introduced in 1997 when Internet Explorer 4 was introduced. Html Help 1.0 is basically a completely HTML based Help system that uses a Help Viewer that internally uses Internet Explorer to render the HTML Help content. Because of its use of the Internet Explorer shell for rendering there were many security issues in the past, which resulted in locking down of the Web Browser control in Windows and also the Help Engine which caused some unfortunate side effects. Even so, CHM continues to be a popular help format because it is very easy to produce content for it, using plain HTML and because it works with many Windows application platforms out of the box. While there have been various attempts to replace CHM help files CHM files still seem to be a popular choice for many applications to display their help systems. The biggest alternative these days is no system based help at all, but links to online documentation. For Windows apps though it's still very common to see CHM help files and there are still a ton of CHM help out there and lots of tools (including our own West Wind Html Help Builder) that produce output for CHM files as well as Web output. Image is Everything and you ain't got it! One problem with the CHM engine is that it's stuck with an ancient Internet Explorer version for rendering. For example if you have help content that uses HTML5 or CSS3 content you might have an HTML Help topic like the following shown here in a full Web Browser instance of Internet Explorer: The page clearly uses some CSS3 features like rounded corners and box shadows that are rendered using plain CSS 3 features. Note that I used Internet Explorer on purpose here to demonstrate that IE9 on Windows 7 can properly render this content using some of the new features of CSS, but the same is true for all other recent versions of the major browsers (FireFox 3.1+, Safari 4.5+, WebKit 9+ etc.). Unfortunately if you take this nice and simple CSS3 content and run it through the HTML Help compiler to produce a CHM file the resulting output on the same machine looks a bit less flashy: All the CSS3 styling is gone and although the page display and functionality still works, but all the extra styling features are gone. This even though I am running this on a Windows 7 machine that has IE9 that should be able to render these CSS features. Bummer. Web Browser Control - perpetually stuck in IE 7 Mode The problem is the Web Browser/Shell Components in Windows. This component is and has been part of Windows for as long as Internet Explorer has been around, but the Web Browser control hasn't kept up with the latest versions of IE. In a nutshell the control is stuck in IE7 rendering mode for engine compatibility reasons by default. However, there is at least one way to fix this explicitly using Registry keys on a per application basis. The key point from that blog article is that you can override the IE rendering engine for a particular executable by setting one (or more) registry flags that tell the Windows Shell which version of the Internet Explorer rendering engine to load. An application that wishes to use a more recent version of Internet Explorer can then register itself during installation for the specific IE version desired and from then on the application will use that version of the Web Browser component. If the application is older than the specified version it falls back to the default version (IE 7 rendering). Forcing CHM files to display with IE9 (or later) Rendering Knowing that we can force the IE usage for a given process it's also possible to affect the CHM rendering by setting same keys on the executable that's hosting the CHM file. What that executable file is depends on the type of application as there are a number of ways that can launch the help engine. hh.exeThe standalone Windows CHM Help Viewer that launches when you launch a CHM from Windows Explorer. You can manually add hh.exe to the registry keys. YourApplication.exeIf you're using .NET or any tool that internally uses the hhControl ActiveX control to launch help content your application is your host. You should add your application's exe to the registry during application startup. foxhhelp9.exeIf you're building a FoxPro application that uses the built-in help features, foxhhelp9.exe is used to actually host the help controls. Make sure to add this executable to the registry. What to set You can configure the Internet Explorer version used for an application in the registry by specifying the executable file name and a value that specifies the IE version desired. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit only or 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe 32 bit on 64 bit machine: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe Note that it's best to always set both values ideally when you install your application so it works regardless of which platform you run on. The value specified is a DWORD value and the interesting values are decimal 9000 for IE9 rendering mode depending on !DOCTYPE settings or 9999 for IE 9 standards mode always. You can use the same logic for 8000 and 8888 for IE8 and the final value of 7000 for IE7 (one has to wonder what they're going todo for version 10 to perpetuate that pattern). I think 9000 is the value you'd most likely want to use. 9000 means that IE9 will be used for rendering but unless the right doctypes are used (XHTML and HTML5 specifically) IE will still fall back into quirks mode as needed. This should allow existing pages to continue to use the fallback engine while new pages that have the proper HTML doctype set can take advantage of the newest features. Here's an example of how I set the registry keys in my Tarma Installmate registry configuration: Note that I set all three values both under the Software and Wow6432Node keys so that this works regardless of where these EXEs are launched from. Even though all apps are 32 bit apps, the 64 bit (the default one shown selected) key is often used. So, now once I've set the registry key for hh.exe I can now launch my CHM help file from Explorer and see the following CSS3 IE9 rendered display: Summary It sucks that we have to go through all these hoops to get what should be natural behavior for an application to support the latest features available on a system. But it shouldn't be a surprise - the Windows Help team (if there even is such a thing) has not been known for forward looking technologies. It's a pretty big hassle that we have to resort to setting registry keys in order to get the Web Browser control and the internal CHM engine to render itself properly but at least it's possible to make it work after all. Using this technique it's possible to ship an application with a help file and allow your CHM help to display with richer CSS markup and correct rendering using the stricter and more consistent XHTML or HTML5 doctypes. If you provide both Web help and in-application help (and why not if you're building from a single source) you now can side step the issue of your customers asking: Why does my help file look so much shittier than the online help… No more!© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5 Help Html Help Builder Internet Explorer Windows Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Web Browser Control – Specifying the IE Version

- by Rick Strahl

I use the Internet Explorer Web Browser Control in a lot of my applications to display document type layout. HTML happens to be one of the most common document formats and displaying data in this format – even in desktop applications, is often way easier than using normal desktop technologies. One issue the Web Browser Control has that it’s perpetually stuck in IE 7 rendering mode by default. Even though IE 8 and now 9 have significantly upgraded the IE rendering engine to be more CSS and HTML compliant by default the Web Browser control will have none of it. IE 9 in particular – with its much improved CSS support and basic HTML 5 support is a big improvement and even though the IE control uses some of IE’s internal rendering technology it’s still stuck in the old IE 7 rendering by default. This applies whether you’re using the Web Browser control in a WPF application, a WinForms app, a FoxPro or VB classic application using the ActiveX control. Behind the scenes all these UI platforms use the COM interfaces and so you’re stuck by those same rules. Rendering Challenged To see what I’m talking about here are two screen shots rendering an HTML 5 doctype page that includes some CSS 3 functionality – rounded corners and border shadows - from an earlier post. One uses IE 9 as a standalone browser, and one uses a simple WPF form that includes the Web Browser control. IE 9 Browser: Web Browser control in a WPF form: The IE 9 page displays this HTML correctly – you see the rounded corners and shadow displayed. Obviously the latter rendering using the Web Browser control in a WPF application is a bit lacking. Not only are the new CSS features missing but the page also renders in Internet Explorer’s quirks mode so all the margins, padding etc. behave differently by default, even though there’s a CSS reset applied on this page. If you’re building an application that intends to use the Web Browser control for a live preview of some HTML this is clearly undesirable. Feature Delegation via Registry Hacks Fortunately starting with Internet Explore 8 and later there’s a fix for this problem via a registry setting. You can specify a registry key to specify which rendering mode and version of IE should be used by that application. These are not global mind you – they have to be enabled for each application individually. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe The value to set this key to is (taken from MSDN here) as decimal values: 9999 (0x270F) Internet Explorer 9. Webpages are displayed in IE9 Standards mode, regardless of the !DOCTYPE directive. 9000 (0x2328) Internet Explorer 9. Webpages containing standards-based !DOCTYPE directives are displayed in IE9 mode. 8888 (0x22B8) Webpages are displayed in IE8 Standards mode, regardless of the !DOCTYPE directive. 8000 (0x1F40) Webpages containing standards-based !DOCTYPE directives are displayed in IE8 mode. 7000 (0x1B58) Webpages containing standards-based !DOCTYPE directives are displayed in IE7 Standards mode. The added key looks something like this in the Registry Editor: With this in place my Html Html Help Builder application which has wwhelp.exe as its main executable now works with HTML 5 and CSS 3 documents in the same way that Internet Explorer 9 does. Incidentally I accidentally added an ‘empty’ DWORD value of 0 to my EXE name and that worked as well giving me IE 9 rendering. Although not documented I suspect 0 (or an invalid value) will default to the installed browser. Don’t have a good way to test this but if somebody could try this with IE 8 installed that would be great: What happens when setting 9000 with IE 8 installed? What happens when setting 0 with IE 8 installed? Don’t forget to add Keys for Host Environments If you’re developing your application in Visual Studio and you run the debugger you may find that your application is still not rendering right, but if you run the actual generated EXE from Explorer or the OS command prompt it works. That’s because when you run the debugger in Visual Studio it wraps your application into a debugging host container. For this reason you might want to also add another registry key for yourapp.vshost.exe on your development machine. If you’re developing in Visual FoxPro make sure you add a key for vfp9.exe to see the rendering adjustments in the Visual FoxPro development environment. Cleaner HTML - no more HTML mangling! There are a number of additional benefits to setting up rendering of the Web Browser control to the IE 9 engine (or even the IE 8 engine) beyond the obvious rendering functionality. IE 9 actually returns your HTML in something that resembles the original HTML formatting, as opposed to the IE 7 default format which mangled the original HTML content. If you do the following in the WPF application: private void button2_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; MessageBox.Show(doc.body.outerHtml); } you get different output depending on the rendering mode active. With the default IE 7 rendering you get: <BODY><DIV> <H1>Rounded Corners and Shadows - Creating Dialogs in CSS</H1> <DIV class=toolbarcontainer><A class=hoverbutton href="./"><IMG src="../../css/images/home.gif"> Home</A> <A class=hoverbutton href="RoundedCornersAndShadows.htm"><IMG src="../../css/images/refresh.gif"> Refresh</A> </DIV> <DIV class=containercontent> <FIELDSET><LEGEND>Plain Box</LEGEND> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Box with Header</LEGEND> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV class="gridheaderleft roundbox-top">Box with a Header</DIV> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox-bottom">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Dialog Style Window</LEGEND> <DIV style="POSITION: relative; WIDTH: 450px" id=divDialog class="dialog boxshadow" jQuery16107208195684204002="2"> <DIV style="POSITION: relative" class=dialog-header> <DIV class=closebox></DIV>User Sign-in <DIV class=closebox jQuery16107208195684204002="3"></DIV></DIV> <DIV class=descriptionheader>This dialog is draggable and closable</DIV> <DIV class=dialog-content><LABEL>Username:</LABEL> <INPUT name=txtUsername value=" "> <LABEL>Password</LABEL> <INPUT name=txtPassword value=" "> <HR> <INPUT id=btnLogin value=Login type=button> </DIV> <DIV class=dialog-statusbar>Ready</DIV></DIV></FIELDSET> </DIV> <SCRIPT type=text/javascript> $(document).ready(function () { $("#divDialog") .draggable({ handle: ".dialog-header" }) .closable({ handle: ".dialog-header", closeHandler: function () { alert("Window about to be closed."); return true; // true closes - false leaves open } }); }); </SCRIPT> </DIV></BODY> Now lest you think I’m out of my mind and create complete whacky HTML rooted in the last century, here’s the IE 9 rendering mode output which looks a heck of a lot cleaner and a lot closer to my original HTML of the page I’m accessing: <body> <div> <h1>Rounded Corners and Shadows - Creating Dialogs in CSS</h1> <div class="toolbarcontainer"> <a class="hoverbutton" href="./"> <img src="../../css/images/home.gif"> Home</a> <a class="hoverbutton" href="RoundedCornersAndShadows.htm"> <img src="../../css/images/refresh.gif"> Refresh</a> </div> <div class="containercontent"> <fieldset> <legend>Plain Box</legend>  <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow"> <div style="background: khaki;" class="boxcontenttext roundbox"> Simple Rounded Corner Box. </div> </div> </fieldset> <fieldset> <legend>Box with Header</legend> <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow"> <div class="gridheaderleft roundbox-top">Box with a Header</div> <div style="background: khaki;" class="boxcontenttext roundbox-bottom"> Simple Rounded Corner Box. </div> </div> </fieldset> <fieldset> <legend>Dialog Style Window</legend> <div style="width: 450px; position: relative;" id="divDialog" class="dialog boxshadow"> <div style="position: relative;" class="dialog-header"> <div class="closebox"></div> User Sign-in <div class="closebox"></div></div> <div class="descriptionheader">This dialog is draggable and closable</div> <div class="dialog-content"> <label>Username:</label> <input name="txtUsername" value=" " type="text"> <label>Password</label> <input name="txtPassword" value=" " type="text"> <hr/> <input id="btnLogin" value="Login" type="button"> </div> <div class="dialog-statusbar">Ready</div> </div> </fieldset> </div> <script type="text/javascript"> $(document).ready(function () { $("#divDialog") .draggable({ handle: ".dialog-header" }) .closable({ handle: ".dialog-header", closeHandler: function () { alert("Window about to be closed."); return true; // true closes - false leaves open } }); }); </script> </div> </body> IOW, in IE9 rendering mode IE9 is much closer (but not identical) to the original HTML from the page on the Web that we’re reading from. As a side note: Unfortunately, the browser feature emulation can't be applied against the Html Help (CHM) Engine in Windows which uses the Web Browser control (or COM interfaces anyway) to render Html Help content. I tried setting up hh.exe which is the help viewer, to use IE 9 rendering but a help file generated with CSS3 features will simply show in IE 7 mode. Bummer - this would have been a nice quick fix to allow help content served from CHM files to look better. HTML Editing leaves HTML formatting intact In the same vane, if you do any inline HTML editing in the control by setting content to be editable, IE 9’s control does a much more reasonable job of creating usable and somewhat valid HTML. It also leaves the original content alone other than the text your are editing or adding. No longer is the HTML output stripped of excess spaces and reformatted in IEs format. So if I do: private void button3_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; doc.body.contentEditable = true; } and then make some changes to the document by typing into it using IE 9 mode, the document formatting stays intact and only the affected content is modified. The created HTML is reasonably clean (although it does lack proper XHTML formatting for things like <br/> <hr/>). This is very different from IE 7 mode which mangled the HTML as soon as the page was loaded into the control. Any editing you did stripped out all white space and lost all of your existing XHTML formatting. In IE 9 mode at least *most* of your original formatting stays intact. This is huge! In Html Help Builder I have supported HTML editing for a long time but the HTML mangling by the Web Browser control made it very difficult to edit the HTML later. Previously IE would mangle the HTML by stripping out spaces, upper casing all tags and converting many XHTML safe tags to its HTML 3 tags. Now IE leaves most of my document alone while editing, and creates cleaner and more compliant markup (with exception of self-closing elements like BR/HR). The end result is that I now have HTML editing in place that's much cleaner and actually capable of being manually edited. Caveats, Caveats, Caveats It wouldn't be Internet Explorer if there weren't some major compatibility issues involved in using this various browser version interaction. The biggest thing I ran into is that there are odd differences in some of the COM interfaces and what they return. I specifically ran into a problem with the document.selection.createRange() function which with IE 7 compatibility returns an expected text range object. When running in IE 8 or IE 9 mode however. I could not retrieve a valid text range with this code where loEdit is the WebBrowser control: loRange = loEdit.document.selection.CreateRange() The loRange object returned (here in FoxPro) had a length property of 0 but none of the other properties of the TextRange or TextRangeCollection objects were available. I figured this was due to some changed security settings but even after elevating the Intranet Security Zone and mucking with the other browser feature flags pertaining to security I had no luck. In the end I relented and used a JavaScript function in my editor document that returns a selection range object: function getselectionrange() { var range = document.selection.createRange(); return range; } and call that JavaScript function from my host applications code: *** Use a function in the document to get around HTML Editing issues loRange = loEdit.document.parentWindow.getselectionrange(.f.) and that does work correctly. This wasn't a big deal as I'm already loading a support script file into the editor page so all I had to do is add the function to this existing script file. You can find out more how to call script code in the Web Browser control from a host application in a previous post of mine. IE 8 and 9 also clamp down the security environment a little more than the default IE 7 control, so there may be other issues you run into. Other than the createRange() problem above I haven't seen anything else that is breaking in my code so far though and that's encouraging at least since it uses a lot of HTML document manipulation for the custom editor I've created (and would love to replace - any PROFESSIONAL alternatives anybody?) Registry Key Installation for your Application It’s important to remember that this registry setting is made per application, so most likely this is something you want to set up with your installer. Also remember that 32 and 64 bit settings require separate settings in the registry so if you’re creating your installer you most likely will want to set both keys in the registry preemptively for your application. I use Tarma Installer for all of my application installs and in Tarma I configure registry keys for both and set a flag to only install the latter key group in the 64 bit version: Because this setting is application specific you have to do this for every application you install unfortunately, but this also means that you can safely configure this setting in the registry because it is after only applied to your application. Another problem with install based installation is version detection. If IE 8 is installed I’d want 8000 for the value, if IE 9 is installed I want 9000. I can do this easily in code but in the installer this is much more difficult. I don’t have a good solution for this at the moment, but given that the app works with IE 7 mode now, IE 9 mode is just a bonus for the moment. If IE 9 is not installed and 9000 is used the default rendering will remain in use. It sure would be nice if we could specify the IE rendering mode as a property, but I suspect the ActiveX container has to know before it loads what actual version to load up and once loaded can only load a single version of IE. This would account for this annoying application level configuration… Summary The registry feature emulation has been available for quite some time, but I just found out about it today and started experimenting around with it. I’m stoked to see that this is available as I’d pretty much given up in ever seeing any better rendering in the Web Browser control. Now at least my apps can take advantage of newer HTML features. Now if we could only get better HTML Editing support somehow <snicker>… ah can’t have everything.© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET FoxPro Windows

Read the article

C#/.NET Little Pitfalls: The Dangers of Casting Boxed Values

- by James Michael Hare

Starting a new series to parallel the Little Wonders series. In this series, I will examine some of the small pitfalls that can occasionally trip up developers. Introduction: Of Casts and Conversions What happens when we try to assign from an int and a double and vice-versa? 1: double pi = 3.14; 2: int theAnswer = 42; 3: 4: // implicit widening conversion, compiles! 5: double doubleAnswer = theAnswer; 6: 7: // implicit narrowing conversion, compiler error! 8: int intPi = pi; As you can see from the comments above, a conversion from a value type where there is no potential data loss is can be done with an implicit conversion. However, when converting from one value type to another may result in a loss of data, you must make the conversion explicit so the compiler knows you accept this risk. That is why the conversion from double to int will not compile with an implicit conversion, we can make the conversion explicit by adding a cast: 1: // explicit narrowing conversion using a cast, compiler 2: // succeeds, but results may have data loss: 3: int intPi = (int)pi; So for value types, the conversions (implicit and explicit) both convert the original value to a new value of the given type. With widening and narrowing references, however, this is not the case. Converting reference types is a bit different from converting value types. First of all when you perform a widening or narrowing you don’t really convert the instance of the object, you just convert the reference itself to the wider or narrower reference type, but both the original and new reference type both refer back to the same object. Secondly, widening and narrowing for reference types refers the going down and up the class hierarchy instead of referring to precision as in value types. That is, a narrowing conversion for a reference type means you are going down the class hierarchy (for example from Shape to Square) whereas a widening conversion means you are going up the class hierarchy (from Square to Shape). 1: var square = new Square(); 2: 3: // implicitly convers because all squares are shapes 4: // (that is, all subclasses can be referenced by a superclass reference) 5: Shape myShape = square; 6: 7: // implicit conversion not possible, not all shapes are squares! 8: // (that is, not all superclasses can be referenced by a subclass reference) 9: Square mySquare = (Square) myShape; So we had to cast the Shape back to Square because at that point the compiler has no way of knowing until runtime whether the Shape in question is truly a Square. But, because the compiler knows that it’s possible for a Shape to be a Square, it will compile. However, if the object referenced by myShape is not truly a Square at runtime, you will get an invalid cast exception. Of course, there are other forms of conversions as well such as user-specified conversions and helper class conversions which are beyond the scope of this post. The main thing we want to focus on is this seemingly innocuous casting method of widening and narrowing conversions that we come to depend on every day and, in some cases, can bite us if we don’t fully understand what is going on! The Pitfall: Conversions on Boxed Value Types Can Fail What if you saw the following code and – knowing nothing else – you were asked if it was legal or not, what would you think: 1: // assuming x is defined above this and this 2: // assignment is syntactically legal. 3: x = 3.14; 4: 5: // convert 3.14 to int. 6: int truncated = (int)x; You may think that since x is obviously a double (can’t be a float) because 3.14 is a double literal, but this is inaccurate. Our x could also be dynamic and this would work as well, or there could be user-defined conversions in play. But there is another, even simpler option that can often bite us: what if x is object? 1: object x; 2: 3: x = 3.14; 4: 5: int truncated = (int) x; On the surface, this seems fine. We have a double and we place it into an object which can be done implicitly through boxing (no cast) because all types inherit from object. Then we cast it to int. This theoretically should be possible because we know we can explicitly convert a double to an int through a conversion process which involves truncation. But here’s the pitfall: when casting an object to another type, we are casting a reference type, not a value type! This means that it will attempt to see at runtime if the value boxed and referred to by x is of type int or derived from type int. Since it obviously isn’t (it’s a double after all) we get an invalid cast exception! Now, you may say this looks awfully contrived, but in truth we can run into this a lot if we’re not careful. Consider using an IDataReader to read from a database, and then attempting to select a result row of a particular column type: 1: using (var connection = new SqlConnection("some connection string")) 2: using (var command = new SqlCommand("select * from employee", connection)) 3: using (var reader = command.ExecuteReader()) 4: { 5: while (reader.Read()) 6: { 7: // if the salary is not an int32 in the SQL database, this is an error! 8: // doesn't matter if short, long, double, float, reader [] returns object! 9: total += (int) reader["annual_salary"]; 10: } 11: } Notice that since the reader indexer returns object, if we attempt to convert using a cast to a type, we have to make darn sure we use the true, actual type or this will fail! If the SQL database column is a double, float, short, etc this will fail at runtime with an invalid cast exception because it attempts to convert the object reference! So, how do you get around this? There are two ways, you could first cast the object to its actual type (double), and then do a narrowing cast to on the value to int. Or you could use a helper class like Convert which analyzes the actual run-time type and will perform a conversion as long as the type implements IConvertible. 1: object x; 2: 3: x = 3.14; 4: 5: // if you want to cast, must cast out of object to double, then 6: // cast convert. 7: int truncated = (int)(double) x; 8: 9: // or you can call a helper class like Convert which examines runtime 10: // type of the value being converted 11: int anotherTruncated = Convert.ToInt32(x); Summary You should always be careful when performing a conversion cast from values boxed in object that you are actually casting to the true type (or a sub-type). Since casting from object is a widening of the reference, be careful that you either know the exact, explicit type you expect to be held in the object, or instead avoid the cast and use a helper class to perform a safe conversion to the type you desire. Technorati Tags: C#,.NET,Pitfalls,Little Pitfalls,BlackRabbitCoder

Read the article

Observations in Migrating from JavaFX Script to JavaFX 2.0

- by user12608080

Observations in Migrating from JavaFX Script to JavaFX 2.0 Introduction Having been available for a few years now, there is a decent body of work written for JavaFX using the JavaFX Script language. With the general availability announcement of JavaFX 2.0 Beta, the natural question arises about converting the legacy code over to the new JavaFX 2.0 platform. This article reflects on some of the observations encountered while porting source code over from JavaFX Script to the new JavaFX API paradigm. The Application The program chosen for migration is an implementation of the Sudoku game and serves as a reference application for the book JavaFX – Developing Rich Internet Applications. The design of the program can be divided into two major components: (1) A user interface (ideally suited for JavaFX design) and (2) the puzzle generator. For the context of this article, our primary interest lies in the user interface. The puzzle generator code was lifted from a sourceforge.net project and is written entirely in Java. Regardless which version of the UI we choose (JavaFX Script vs. JavaFX 2.0), no code changes were required for the puzzle generator code. The original user interface for the JavaFX Sudoku application was written exclusively in JavaFX Script, and as such is a suitable candidate to convert over to the new JavaFX 2.0 model. However, a few notable points are worth mentioning about this program. First off, it was written in the JavaFX 1.1 timeframe, where certain capabilities of the JavaFX framework were as of yet unavailable. Citing two examples, this program creates many of its own UI controls from scratch because the built-in controls were yet to be introduced. In addition, layout of graphical nodes is done in a very manual manner, again because much of the automatic layout capabilities were in flux at the time. It is worth considering that this program was written at a time when most of us were just coming up to speed on this technology. One would think that having the opportunity to recreate this application anew, it would look a lot different from the current version. Comparing the Size of the Source Code An attempt was made to convert each of the original UI JavaFX Script source files (suffixed with .fx) over to a Java counterpart. Due to language feature differences, there are a small number of source files which only exist in one version or the other. The table below summarizes the size of each of the source files. JavaFX Script source file Number of Lines Number of Character JavaFX 2.0 Java source file Number of Lines Number of Characters ArrowKey.java 6 72 Board.fx 221 6831 Board.java 205 6508 BoardNode.fx 446 16054 BoardNode.java 723 29356 ChooseNumberNode.fx 168 5267 ChooseNumberNode.java 302 10235 CloseButtonNode.fx 115 3408 CloseButton.java 99 2883 ParentWithKeyTraversal.java 111 3276 FunctionPtr.java 6 80 Globals.java 20 554 Grouping.fx 8 140 HowToPlayNode.fx 121 3632 HowToPlayNode.java 136 4849 IconButtonNode.fx 196 5748 IconButtonNode.java 183 5865 Main.fx 98 3466 Main.java 64 2118 SliderNode.fx 288 10349 SliderNode.java 350 13048 Space.fx 78 1696 Space.java 106 2095 SpaceNode.fx 227 6703 SpaceNode.java 220 6861 TraversalHelper.fx 111 3095 Total 2,077 79,127 2531 87,800 A few notes about this table are in order: The number of lines in each file was determined by running the Unix ‘wc –l’ command over each file. The number of characters in each file was determined by running the Unix ‘ls –l’ command over each file. The examination of the code could certainly be much more rigorous. No standard formatting was performed on these files. All comments however were deleted. There was a certain expectation that the new Java version would require more lines of code than the original JavaFX script version. As evidenced by a count of the total number of lines, the Java version has about 22% more lines than its FX Script counterpart. Furthermore, there was an additional expectation that the Java version would be more verbose in terms of the total number of characters. In fact the preceding data shows that on average the Java source files contain fewer characters per line than the FX files. But that's not the whole story. Upon further examination, the FX Script source files had a disproportionate number of blank characters. Why? Because of the nature of how one develops JavaFX Script code. The object literal dominates FX Script code. Its not uncommon to see object literals indented halfway across the page, consuming lots of meaningless space characters. RAM consumption Not the most scientific analysis, memory usage for the application was examined on a Windows Vista system by running the Windows Task Manager and viewing how much memory was being consumed by the Sudoku version in question. Roughly speaking, the FX script version, after startup, had a RAM footprint of about 90MB and remained pretty much the same size. The Java version started out at about 55MB and maintained that size throughout its execution. What About Binding? Arguably, the most striking observation about the conversion from JavaFX Script to JavaFX 2.0 concerned the need for data synchronization, or lack thereof. In JavaFX Script, the primary means to synchronize data is via the bind expression (using the “bind” keyword), and perhaps to a lesser extent it’s “on replace” cousin. The bind keyword does not exist in Java, so for JavaFX 2.0 a Data Binding API has been introduced as a replacement. To give a feel for the difference between the two versions of the Sudoku program, the table that follows indicates how many binds were required for each source file. For JavaFX Script files, this was ascertained by simply counting the number of occurrences of the bind keyword. As can be seen, binding had been used frequently in the JavaFX Script version (and does not take into consideration an additional half dozen or so “on replace” triggers). The JavaFX 2.0 program achieves the same functionality as the original JavaFX Script version, yet the equivalent of binding was only needed twice throughout the Java version of the source code. JavaFX Script source file Number of Binds JavaFX Next Java source file Number of “Binds” ArrowKey.java 0 Board.fx 1 Board.java 0 BoardNode.fx 7 BoardNode.java 0 ChooseNumberNode.fx 11 ChooseNumberNode.java 0 CloseButtonNode.fx 6 CloseButton.java 0 CustomNodeWithKeyTraversal.java 0 FunctionPtr.java 0 Globals.java 0 Grouping.fx 0 HowToPlayNode.fx 7 HowToPlayNode.java 0 IconButtonNode.fx 9 IconButtonNode.java 0 Main.fx 1 Main.java 0 Main_Mobile.fx 1 SliderNode.fx 6 SliderNode.java 1 Space.fx 0 Space.java 0 SpaceNode.fx 9 SpaceNode.java 1 TraversalHelper.fx 0 Total 58 2 Conclusions As the JavaFX 2.0 technology is so new, and experience with the platform is the same, it is possible and indeed probable that some of the observations noted in the preceding article may not apply across other attempts at migrating applications. That being said, this first experience indicates that the migrated Java code will likely be larger, though not extensively so, than the original Java FX Script source. Furthermore, although very important, it appears that the requirements for data synchronization via binding, may be significantly less with the new platform.

Read the article

How to configure VPN in Windows XP

- by SAMIR BHOGAYTA

VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

Read the article

European Interoperability Framework - a new beginning?

- by trond-arne.undheim

The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

Read the article

Use Autoruns to Manually Clean an Infected PC

- by Mark Virtue

There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program? Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit. It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer). Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer. It can be simply downloaded, unzipped and run (link below). This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry. Note: This does not terminate the program if it is running at the time – it merely prevents it from starting next time. To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)). Note: This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not. Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you. Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay. Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”). Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries: Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them. Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place. If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others. Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry. Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry. When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

Read the article

Combination of Operating Mode and Commit Strategy

- by Kevin Yang

If you want to populate a source into multiple targets, you may also want to ensure that every row from the source affects all targets uniformly (or separately). Let’s consider the Example Mapping below. If a row from SOURCE causes different changes in multiple targets (TARGET_1, TARGET_2 and TARGET_3), for example, it can be successfully inserted into TARGET_1 and TARGET_3, but failed to be inserted into TARGET_2, and the current Mapping Property TLO (target load order) is “TARGET_1 -> TARGET_2 -> TARGET_3”. What should Oracle Warehouse Builder do, in order to commit the appropriate data to all affected targets at the same time? If it doesn’t behave as you intended, the data could become inaccurate and possibly unusable. Example Mapping In OWB, we can use Mapping Configuration Commit Strategies and Operating Modes together to achieve this kind of requirements. Below we will explore the combination of these two features and how they affect the results in the target tables Before going to the example, let’s review some of the terms we will be using (Details can be found in white paper Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide11g Release 2): Operating Modes: Set-Based Mode: Warehouse Builder generates a single SQL statement that processes all data and performs all operations. Row-Based Mode: Warehouse Builder generates statements that process data row by row. The select statement is in a SQL cursor. All subsequent statements are PL/SQL. Row-Based (Target Only) Mode: Warehouse Builder generates a cursor select statement and attempts to include as many operations as possible in the cursor. For each target, Warehouse Builder inserts each row into the target separately. Commit Strategies: Automatic: Warehouse Builder loads and then automatically commits data based on the mapping design. If the mapping has multiple targets, Warehouse Builder commits and rolls back each target separately and independently of other targets. Use the automatic commit when the consequences of multiple targets being loaded unequally are not great or are irrelevant. Automatic correlated: It is a specialized type of automatic commit that applies to PL/SQL mappings with multiple targets only. Warehouse Builder considers all targets collectively and commits or rolls back data uniformly across all targets. Use the correlated commit when it is important to ensure that every row in the source affects all affected targets uniformly. Manual: select manual commit control for PL/SQL mappings when you want to interject complex business logic, perform validations, or run other mappings before committing data. Combination of the commit strategy and operating mode To understand the effects of each combination of operating mode and commit strategy, I’ll illustrate using the following example Mapping. Firstly we insert 100 rows into the SOURCE table and make sure that the 99th row and 100th row have the same ID value. And then we create a unique key constraint on ID column for TARGET_2 table. So while running the example mapping, OWB tries to load all 100 rows to each of the targets. But the mapping should fail to load the 100th row to TARGET_2, because it will violate the unique key constraint of table TARGET_2. With different combinations of Commit Strategy and Operating Mode, here are the results ¦ Set-based/ Correlated Commit: Configuration of Example mapping: Result: What’s happening: A single error anywhere in the mapping triggers the rollback of all data. OWB encounters the error inserting into Target_2, it reports an error for the table and does not load the row. OWB rolls back all the rows inserted into Target_1 and does not attempt to load rows to Target_3. No rows are added to any of the target tables. ¦ Row-based/ Correlated Commit: Configuration of Example mapping: Result: What’s happening: OWB evaluates each row separately and loads it to all three targets. Loading continues in this way until OWB encounters an error loading row 100th to Target_2. OWB reports the error and does not load the row. It rolls back the row 100th previously inserted into Target_1 and does not attempt to load row 100 to Target_3. Then, if there are remaining rows, OWB will continue loading them, resuming with loading rows to Target_1. The mapping completes with 99 rows inserted into each target. ¦ Set-based/ Automatic Commit: Configuration of Example mapping: Result: What’s happening: When OWB encounters the error inserting into Target_2, it does not load any rows and reports an error for the table. It does, however, continue to insert rows into Target_3 and does not roll back the rows previously inserted into Target_1. The mapping completes with one error message for Target_2, no rows inserted into Target_2, and 100 rows inserted into Target_1 and Target_3 separately. ¦ Row-based/Automatic Commit: Configuration of Example mapping: Result: What’s happening: OWB evaluates each row separately for loading into the targets. Loading continues in this way until OWB encounters an error loading row 100 to Target_2 and reports the error. OWB does not roll back row 100th from Target_1, does insert it into Target_3. If there are remaining rows, it will continue to load them. The mapping completes with 99 rows inserted into Target_2 and 100 rows inserted into each of the other targets. Note: Automatic Correlated commit is not applicable for row-based (target only). If you design a mapping with the row-based (target only) and correlated commit combination, OWB runs the mapping but does not perform the correlated commit. In set-based mode, correlated commit may impact the size of your rollback segments. Space for rollback segments may be a concern when you merge data (insert/update or update/insert). Correlated commit operates transparently with PL/SQL bulk processing code. The correlated commit strategy is not available for mappings run in any mode that are configured for Partition Exchange Loading or that include a Queue, Match Merge, or Table Function operator. If you want to practice in your own environment, you can follow the steps: 1. Import the MDL file: commit_operating_mode.mdl 2. Fix the location for oracle module ORCL and deploy all tables under it. 3. Insert sample records into SOURCE table, using below plsql code: begin for i in 1..99 loop insert into source values(i, 'col_'||i); end loop; insert into source values(99, 'col_99'); end; 4. Configure MAPPING_1 to any combinations of operating mode and commit strategy you want to test. And make sure feature TLO of mapping is open. 5. Deploy Mapping “MAPPING_1”. 6. Run the mapping and check the result.

Read the article

PHP script keeps doing mmap/munmap

- by Aurélien Momow

Hello, My PHP script contains a loop, which does nothing much more than echoing and dereferencing pointers (like in $tab[$othertab[$i]]- stuff). It was working great until yesterday, when this script starting being VERY slow (like 50 times slower than before). After using strace, i figured out that 90% of the time, the script does mmap/munmap. Here is a random portion of the strace log : mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0152b000 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac014ea000 Here is the result of the strace -c command : % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 82.77 0.004092 0 13542 mmap 9.69 0.000479 0 3642 write 7.54 0.000373 0 13541 munmap 0.00 0.000000 0 100 read 0.00 0.000000 0 88 poll 0.00 0.000000 0 25 4 access ------ ----------- ----------- --------- --------- ---------------- 100.00 0.004944 30938 4 total Here is the php script : function affAnnonce($tabAnnonces, $isDoublon = 0) { GLOBAL $db, $base, $tabDomaine, $doublon, $traduction, $tab_contrat, $tab_emploi, $tab_categ, $tab_metier, $tab_region, $tab_departement, $tab_secteur, $tab_experience, $calc_all, $tabLangues, $tabLanguesNiveau, $tabNoAffAnnonce, $tabHisto; foreach($tabAnnonces AS $tmp) { if (in_array($tmp['id'], $tabNoAffAnnonce) === true) { continue; } $value->host = "../"; foreach($tabDomaine AS $domaine => $valeur) { if ($domaine == $tmp['domaine']) { $value->host = $valeur->host; break; } } // Ordre // secteur;metier;contrat;emploi;region;langues;domaine $tabPushModif = array(); if ($tmp['push_preview'] != '') { $tabPushModif = explode(';', $tmp['push_preview']); $tabPushModif['secteur'] = $tabPushModif[0]; $tabPushModif['metier'] = $tabPushModif[1]; $tabPushModif['contrat'] = $tabPushModif[2]; $tabPushModif['id_emploi'] = $tabPushModif[3]; $tabPushModif['regions'] = $tabPushModif[4]; $tabPushModif['langues'] = $tabPushModif[5]; $tabPushModif['domaine'] = $tabPushModif[6]; } $infoSoc = get_nom_societe($tmp['id_societe']); $number = ($tmp['nb_preview_push'] != '' ? $tmp['nb_preview_push'] : ' '); $secteurs = explode ("/", $tmp[secteur]); $sector = ""; $count_sect = count($secteurs); for ($k = 0; $k < $count_sect; $k++) { if ($secteurs[$k] != '') { $sector .= $tab_secteur[$secteurs[$k]].'/'; } } $tmp['poste'] = apresinsertion($tmp['poste']); $tmp['metier'] = $tab_metier[$tmp['metier']]; $tmp['region'] = $tab_region[$tmp['region']]; $tmp['departement'] = $tab_departement[$tmp['departement']]; $tmp['secteur'] = $sector; $tmp['id_contrat'] = $tmp['contrat']; $tmp['contrat'] = $tab_contrat[$tmp['contrat']]; $tmp['emploi'] = $tab_emploi[$tmp['id_emploi']]; $tmp['categorie'] = $tab_categ[$tmp['categorie']]; echo '<tr id="'.($isDoublon ? 'dbl_' : '').$tmp['id'].'"><td align="center" class="tdFirst nowrap dbl_'.$tmp['id'].'" id="aff_'.$tmp['id'].'"'; switch($tmp['affiche']) { case '0': echo ' bgcolor=#DBB7FF'; break; default : ; } echo '><a href=?op=annonces&search4='.$tmp[id].' target=_new>'.$tmp[id].'</a><br />'; echo '<a href="'.$value->host.'" target="blank">'.strtoupper($tmp['domaine']).'<br /><img src="../images/flags/'.$tmp['domaine'].'.png" border=0 align=middle></a>'; echo '</TD><TD align=center class=tdNext'; if ($tmp['filtre'] == 1) echo ' bgcolor=#FF0000'; echo '>'; if ($isDoublon) echo '<a id="'.$tmp['id'].'" class="doublon" href="#">DOUBLON</a> - '; if (($tmp[id_reponse] == 1) || ($tmp[id_reponse] == 2) || ($tmp[id_reponse] == 4) || ($tmp[id_reponse] == 5)) echo '<a href="javascript:voir_annonce(\''.$tmp['id'].'\', \''.$value->host.'\')" onMouseOver="showPreview('.$tmp['id'].');" onMouseOut="hidePreview('.$tmp['id'].');">'.$tmp['poste'].'</a>'; if ($tmp[id_reponse] == 3) echo '<a href="javascript:voir_annonce3(\''.$tmp['url_reponse'].'\')" onMouseOver="showPreview('.$tmp['id'].');" onMouseOut="hidePreview('.$tmp['id'].');">'.$tmp['poste'].'</a>'; if ($tmp['urgent'] == 1) print " - <font class=r_bold>urgent</font>"; if ($tmp['gold'] == 1) print " - <font class=g_bold>gold</font>"; if ($tmp['cvtheque'] == 1) print " - CVthèque"; if ($tmp['url_reponse'] != '' && $tmp['id_reponse'] != 3) { echo '<br /><br />URL - '; $len = strlen($tmp['url_reponse']); if ($len > 50) { $link = substr($tmp['url_reponse'], 0, 47).'...'; } else { $link = $tmp['url_reponse']; } echo '<a href="'.$tmp['url_reponse'].'" style="color: #666;" target="_blank">'.$link.'</a>'; } // Début du div ou sera placé l'annonce echo '<br /><div id="preview_'.$tmp['id'].'" name="preview_'.$tmp['id'].'" class="tdStyle1" style="z-index: 1000; display: none; position: fixed; left: 0px; top: 0px; padding: 4px; border: 1px solid #666; background: #fff; text-align: left; width: 777px;" onMouseOver="showPreview('.$tmp['id'].');" onMouseOut="hidePreview('.$tmp['id'].');">'; $tmp["url"] = substr($tmp["url"], 7); $id_modele = getIdModeleByAnnonce($tmp['id_societe'], $tmp["id"], $tmp['domaine']); $tmp["poste"] = mb_strtoupper($tmp["poste"]); $isFnh = isFnhAnnonce($tmp['id']); $logo = ""; if ($isFnh) { $logo_jpg = getFnhLogo(); $logo = "<img align='center' border='0' src='".$logo_jpg."' />"; } else { if ($id_modele > 0) { if ($tmp['id_reponse'] == 1) { $logo_gif = "../fichiers/societes/".$tmp['id_societe']."/".$id_modele.".gif"; if (file_exists($logo_gif)) { $logo = "<img align=center border=0 src=".$logo_gif.">"; } } else { $rep = "../fichiers/societes/".$tmp['id_societe']."/".$id_modele; $logo_jpg = $rep.".jpg"; $logo_swf = $rep.".swf"; $logo_gif = $rep.".gif"; if (file_exists($logo_jpg)) { $logo = "<img align=center border=0 src=".$logo_jpg.">"; } elseif (file_exists($logo_swf)) $logo = '<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0" width="120" height="600"> <param name=movie value="'.$logo_swf.'"> <param name=quality value=high> <embed src="'.$logo_swf.'" quality=high pluginspage="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="120" height="600"></embed> </object>'; elseif (file_exists($logo_gif)) { $logo = "<img align=center border=0 src=".$logo_gif.">"; } } } } if (strlen($logo) > 0 && strlen($tmp['url']) > 0) $logo = "<a href=http://".$tmp['url']." target=_blank>".$logo."</a>"; if (strlen($tmp['url_reponse']) <= 0) { $tmp['url_reponse'] = "../jobs/repondre_annonce.php?id=".$tmp['id']."\" onClick=\""; if ($tmp['contact_email'] == "") $tmp['url_reponse'] .= "alert('".$traduction->aff_word("repondre_courrier", $tabTrad['only_word']).'\n'.$tmp['societe'].'\n'.str_replace("<br />", '\n', ereg_replace("[\r\n\t]", "", $tmp['adresse']))."');"; else $tmp['url_reponse'] .= "popUp(this.href, 'scroll', 540, 400);"; $tmp['url_reponse'] .= "return false;"; } ?> <table width="775" cellspacing="0" cellpadding="0" border=0> <? if ($tmp['id_reponse'] != "2") { ?> <tr> <td width="575" align=center valign=top> <table width="535" border=0 cellspacing=0 cellpadding=2> <tr> <td colspan="2" class="nom_societe"><?=$tmp['societe']?></td> </tr> <tr> <td colspan="2"><hr size=1 color=#000000></td> </tr> <tr> <td colspan="2" align="right"><?=date_2fr($tmp["date_affichage"], 1)?></td> </tr> <tr> <td align="right" class=bold><?=$traduction->aff_word("pays")?> :</td> <td align="left"><?=$tmp['pays0']?></td> </tr> <? if ($tmp['region']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("region")?> :</td> <td align="left"><?=$tmp['region']?></td> </tr> <? } if ($tmp['departement']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("departement")?> :</td> <td align="left"><?=$tmp['departement']?></td> </tr> <? } if ($tmp['ville']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("ville")?> :</td> <td align="left"><?=$tmp['ville']?></td> </tr> <? } if ($tmp['debut']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("debut_travail")?> :</td> <td align="left"><?=$tmp['debut']?></td> </tr> <? } ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("type_contrat")?> :</td> <td align="left"><?=$tmp['contrat']?></td> </tr> <? if ($tmp['emploi']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("type_emploi")?> :</td> <td align="left"><?=$tmp['emploi']?></td> </tr> <? } if ($tmp['salaire']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("salaire")?> :</td> <td align="left"><?=$tmp['salaire']?></td> </tr> <? } if ($tmp['experience']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("experience_metier")?> :</td> <td align="left"><?=$tab_experience[$tmp['experience']]?></td> </tr> <? } if ($tmp['reference']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("reference")?> :</td> <td align="left"><?=$tmp['reference']?></td> </tr> <? } ?> <tr> <td> </td> <td><hr size=1 color=#000000 width=405></td> </tr> <? if ($tmp['presentation']) { ?> <tr> <td valign=top align="right" class=bold><?=$traduction->aff_word("presentation")?> :</td> <td style="text-align: justify;"><?=$tmp['presentation']?></td> </tr> <tr> <td> </td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } ?> <tr> <td valign="top" class=bold align="right"><?=$traduction->aff_word("poste")?> :</td> <td valign="top" class=titre_poste align=center><?=$tmp['poste']?></td> </tr> <tr> <td colspan=2> </td> </tr> <tr> <td valign="top" class=bold align="right"><?=$traduction->aff_word("description")?> :</td> <td style="text-align: justify;"><?=$tmp['description']?></td> </tr> <tr> <td width=100%> </td> <td width=405><hr size=1 color=#000000 width=405></td> </tr> <? if ($tmp['profil']) { ?> <tr> <td valign="top" align="right" class=bold><?=$traduction->aff_word("profil")?> :</td> <td valign="top" style="text-align: justify;"><?=$tmp['profil']?></td> </tr> <tr> <td> </td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } if ($tmp['recommandation']) { ?> <tr> <td valign="top" align="left"></td> <td valign="top" style="text-align: justify;"><?=$tmp['recommandation']?></td> </tr> <tr> <td> </td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } if ($tmp['contact_nom'] || $tmp['contact_prenom']) { ?> <tr> <td valign="top" align="right" class=bold><?=$traduction->aff_word("contact")?> :</td> <td valign="top" align="left"><?=$tmp['contact_prenom']?> <?=$tmp['contact_nom']?></td> </tr> <tr> <td> </td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } ?> <? } elseif ($tmp['domaine'] != 'de') { ?> <tr> <td colspan=2><table width="755" align=right valign=top><tr><td><?=$tmp['presentation']?></td></tr></table></td> </tr> <? } ?> <tr> <td rowspan=6> </td> <td><a href="<?=$tmp['url_reponse']?>" target="_blank">>> <?=$traduction->aff_word("repondre_en_ligne")?></a></td> </tr> <tr> <td><a href="../jobs/affiche_imprime_annonce.php?id=<?=$tmp['id']?>" onClick="popUp(this.href, 'scroll', 540, 400);return false;" target="_blank">>> <?=$traduction->aff_word("version_imprimer")?></a></td> </tr> <tr> <td><a href="../jobs/send_friend_annonce.php?id=<?=$tmp['id']?>" onClick="popUp(this.href, 'clean', 400, 300);return false;" target="_blank">>> <?=$traduction->aff_word("envoi_ami")?></a></td> </tr> <tr> <td><a href="./affiche_liste.php?soc=<?=$tmp['societe_clean']?>">>> <?=$traduction->aff_word("toutes_offres")?> <?=$tmp['societe']?></a></td> </tr> <tr> <td><a href="../jobs/index.php">>> <?=$traduction->aff_word("nouvelle_recherche")?></a></td> </tr> <tr> <td><a href="../jobs/index.php" onClick="javascript:retour(); return false;"><< <?=$traduction->aff_word("retour")?></a></td> </tr> <? if ($tmp['id_reponse'] != "2") { ?> </table> </td> <td width="200" align=center class=black_bord valign=top> <table width="190" cellspacing=0 cellpadding=0 border=0> <tr> <td colspan="2" align="center" valign="top" class=bold><? if ($tmp['id_reponse'] != "5") { ?><br><? } ?><?=$logo?><br><br><?=$tmp['societe']?></td> </tr> <? if ($tmp['adresse']) { ?> <tr> <td align="center" colspan=2><?=$tmp['adresse']?></td> </tr> <tr> <td colspan=2> </td> </tr> <? } if ($tmp['contact_tel']) { ?> <tr> <td class=bold align=right><?=$traduction->aff_word("tel")?> :</td> <td align=center><?=$tmp['contact_tel']?></td> </tr> <? } if ($tmp['contact_fax']) { ?> <tr> <td class=bold align=right><?=$traduction->aff_word("fax")?> :</td> <td align=center><?=$tmp['contact_fax']?></td> </tr> <? } if ($tmp['url']) { ?> <tr> <td colspan=2 align=center><a href="http://<?=$tmp['url']?>" target="_blank"><?=$tmp['url']?></a></td> </tr> <? } ?> </table> </td> </tr> <? } ?> </table> <? echo '</div>'; // Fin du div ou sera placé l'annonce echo "</TD><TD align=center class=tdNext><b>".date_2fr($tmp['date_creation'], 1)."</b><br>".date_2fr($tmp['date_affichage'], 1); echo "</TD><TD align=center class=tdNext>".$tmp[societe]."<br>(<i><a href=".$value->host."login/login.php?login=".$infoSoc->email."&pass=".$infoSoc->password." target=_blank>".$infoSoc->nom."</a></i>)<br><a href=index.php?op=entreprise&ac=tableau_bord&id_societe=".$tmp['id_societe'].">compte</a></TD>"; $color = ''; switch($tmp[push_mail]) { case "0": $color = " bgcolor=#DBB7FF"; break; case "2": $color = " bgcolor=#CCCCCC"; break; default : ; } $type_rep = ""; switch ($tmp[id_reponse]) { case 1: $type_rep = "Standard"; break; case 2: $type_rep = "Chartée"; break; case 3: $type_rep = "Metamoteur"; break; case 4: $type_rep = "Reponse sur site"; break; case 5: $type_rep = "Semi-chartée"; break; } print " <td align=center class=tdNext> <table width=100% border=0 cellspacing=0 cellpadding=0> <tr> <td align=center class=cadreBas>".$tmp['contrat']." - ".$tmp['emploi']."</td> <td $color align=center rowspan=4 width=40%> <a onclick=\"javascript:colorannonce(this, '#CFFFCF');\" href=?op=agentalertes&action=modify_push&id_annonce=".$tmp[id]." target=_blank>Modifier push</a><br><br> <a onclick=\"sendPush(this, ".$tmp['id']."); return false;\" href=\"#\">Envoyer Push</a> </td> </tr> <tr> <td align=center class=cadreBas>".(strlen($tmp['metier']) > 0 ? $tmp['metier'] : '<font class=gris_i>'.$tmp['categorie'].'</font>')."</td> </tr> <tr> <td align=center class=cadreBas>".$tmp[secteur]."</td> </tr> <tr> <td align=center>".($number < 500 ? '<font color="red">' : ($number > 1500 ? '<font color="orange">' : '<font color="green">')).$number."</font></td> </tr> </table> </td> <td align=center class=tdNext> <table width=100% border=0 cellspacing=0 cellpadding=0> <tr> <td align=center class=cadreBas>"; if (strlen($tabPushModif['regions']) > 0) { $tab = explode('/', $tabPushModif['regions']); foreach($tab AS $elem) { if (strlen($elem) <= 0) continue; if (strpos($elem, 'dep-') !== false) { echo $tab_departement[substr($elem, 4)]; $query_tmp = 'SELECT region FROM ref_departement WHERE id = "'.substr($elem, 4).'"'; $obj = $db->getObj($query_tmp); if ($obj) { echo ' - '.$tab_region[$obj->region]; $query_tmp = 'SELECT rp.code_pays FROM ref_pays rp INNER JOIN ref_region rr ON rr.pays = rp.id WHERE rr.id = "'.$obj->region.'"'; $obj = $db->getObj($query_tmp); if ($obj) echo ' ('.$obj->code_pays.')'; } } elseif (is_numeric($elem) === false) { echo '<font class=gris_i>'.$tmp['departement'].' - '.$tmp['region'].'</font> ('.$elem.')'; } else { echo '<font class=gris_i>'.$tmp['departement'].'</font> - '.$tab_region[$elem]; $query_tmp = 'SELECT rp.code_pays FROM ref_pays rp INNER JOIN ref_region rr ON rr.pays = rp.id WHERE rr.id = "'.$obj->region.'"'; $obj = $db->getObj($query_tmp); if ($obj) echo ' ('.$obj->code_pays.')'; } } } else echo $tmp['departement']." - ".$tmp['region']." (".$tmp['code_pays'].")"; echo "</td> </tr> <tr> <td align=center class=cadreBas>".$tmp[ville]."</td> </tr> <tr> <td align=center class=cadreBas>"; if (strlen($tabPushModif['metier']) > 0) { $tmpExp = array(); $tab = explode('/', $tabPushModif['metier']); foreach($tab AS $elem) { if (strlen($elem) <= 0) continue; $tmpMetier = explode('-', $elem); if (isset($tmpMetier[1])) { if (in_array($tmpMetier[1], $tmpExp) === true) continue; $tmpExp[] = $tmpMetier[1]; if ($tmpMetier[1] == $tmp['experience']) echo '<b>'.$tab_experience[$tmpMetier[1]].'</b>/'; else echo $tab_experience[$tmpMetier[1]].'/'; } } if (count($tmpExp) <= 0) echo '<font class=gris_i>'.$tab_experience[$tmp['experience']].'</font>'; } else echo $tab_experience[$tmp['experience']]; echo "</td> </tr> <tr> <td align=center>".$tabLangues[$tmp['id_langue']]->langue." - ".$tabLanguesNiveau[$tmp['id_langue_niveau']]->langue_niveau."</td> </tr> </table> </td> <td align=center class=tdNext> <table width=100% cellspacing=0 cellpadding=0 border=0> <tr> <td align=center class=cadreBas>$type_rep</td> </tr> <tr> <td align=center>".$tmp[compteur_vu]." / <a href=?op=gcand&ac=liste&id_annonce=".$tmp[id]."&statut=all target=_new>".$tmp[compteur_repondu]."</a></td> </tr> </table> </td> <td align=center class=tdNext> <table width=100% cellspacing=0 cellpadding=0 border=0> <tr> <td align=center class=cadreBas><a href=?op=annonces&ac=modifier&id_annonce=".$tmp['id']." target=_new>Modifier</a></td> </tr> <tr> <td align=center class=cadreBas><a href='' onClick=\"valid_delete('".$tmp['id']."'); return false;\">Supprimer</a></td> </tr> <tr> <td align=center><a href='' onClick='changeAff(".$tmp['id']."); return false;' id='changeAff_".$tmp['id']."'>".($tmp['affiche'] == 1 ? 'Mettre hors ligne' : 'Mettre en ligne')."</a></td> </tr> </table> </td> <td align=center class='tdNext gris'> <p style=\"color:#444;\">  ".nl2br($tmp['push_res']).'</p>'; if (is_array($tabHisto[$tmp['id']])) { echo '<p style="color:#888; padding-top:5px;">'; foreach($tabHisto[$tmp['id']] as $histo) { echo $histo['type_modif'].' '.HumanDateTime($histo['date']).' par '.$histo['user']; if ($histo['new_annonce']) { echo ' [New ID : <a href="index.php?op=annonces&search4='.$histo['new_annonce'].'">'.$histo['new_annonce'].'</a>]'; } echo '<br />'; } echo '</p>'; } echo " </td> <td align=center> ".$tmp['source']; if (!empty($tmp['source_ref'])) { echo '<br /><a href="redirect.php?site='.$tmp['source_ref'].'" target="_blank">Voir original</a>'; } echo '</td></tr>'; if (isset($doublon) && !$isDoublon) { $query2 = " SELECT a.*, rp.pays0, rp.code_pays FROM annonces a INNER JOIN ref_pays rp ON rp.id = a.pays WHERE a.id_societe = '".$tmp['id_societe']."' AND a.contrat = '".$tmp['id_contrat']."' AND a.domaine = '".$tmp['domaine']."' AND a.id != '".$tmp['id']."' AND ADDDATE(a.date_creation, INTERVAL 2 MONTH) > '".$tmp['date_creation']."' AND a.poste = \"".addslashes($tmp['poste'])."\" AND a.ville = \"".addslashes($tmp['ville'])."\" AND a.societe = \"".addslashes($tmp['societe'])."\" AND (a.id_societe != 1 OR (a.id_societe = 1 AND a.contact_email = \"".$tab_annonce['contact_email']."\")) ORDER BY a.id DESC"; $tabAnnonces2 = $db->getTab($query2); if (count($tabAnnonces2) > 0) { $tabId = array(); foreach($tabAnnonces2 as $annonc) { $tabId[] = $annonc['id']; } $tmpListAnnonceTab = annoncelist::getHistorique($tabId); $tmpTabHisto = createTabHisto($tmpListAnnonceTab); $tabHisto += $tmpTabHisto; //Additionne les 2 tableaux, contrairement à array_merge il garde les clés !! affAnnonce($tabAnnonces2, 1); foreach($tabAnnonces2 AS $tmpAnn) $tabNoAffAnnonce[] = $tmpAnn['id']; } } } } ?> Only this script is slow, all the others on the same server/domain/directory work great. On an other server, the same script works fine. The script takes up to 90% of CPU when running. Any ideas?

Read the article

Resizing text in an HTML 5 page using JQuery

- by nikolaosk

This is going to be the ninth post in a series of posts regarding HTML 5. You can find the other posts here, here , here , here, here , here , here and here.In this post I will demonstrate how to implement a very common feature found in websites today, enabling the visitor to increase or decrease the font size of a page. You can use the JQuery code I will write in this post for HTML pages which do not follow the HTML 5 standard. As I said earlier we need to write JavaScript to implement this functionality.I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadIn this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. The HTML markup for the page follows. <!DOCTYPE html><html lang="en"> <head> <title>HTML 5, CSS3 and JQuery</title> <meta http-equiv="Content-Type" content="text/html;charset=utf-8" > <link rel="stylesheet" type="text/css" href="style.css"> <script type="text/javascript" src="jquery-1.8.2.min.js"> </script><script type="text/javascript">$(function() { $('a').click(function() { var getfont = $('p').css('font-size'); var mynum = parseFloat(getfont, 10); var newmwasure = getfont.slice(-2); $('p').css('font-size', mynum / 1.2 + newmwasure); if(this.id == 'increase') { $('p').css('font-size', mynum * 1.4 + newmwasure); } }) })</script> </head> <body> <div id="header"> <h1>Learn cutting edge technologies</h1> <h2>HTML 5, JQuery, CSS3</h2> </div> <div id="resize"> <a href="" id="increase">Increase Font</a> | <a href="" id="decrease">Decrease Font</a> </div> <div id="main"> <h2>HTML 5</h2> <article> <p> HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML. </p> </article> </div> </body> </html> There is nothing difficult or fancy in the HTML markup above. I have a link to the external JQuery library and the JQuery code is included inside the .html page.I have two links on this page that will increase/decrease the font size of the contents enclosed inside the <p></p> tags.Let me explain what the JQuery code does.When the user clicks on the link, I store in a variable the current font size of the <p> element that I get back from the CSS function. var getfont = $('p').css('font-size'); So now we have the original value. That will return a value like "16px" "1.2em".Then I need to get the unit of measurement (px,em).I use the slice() function. var newmwasure = getfont.slice(-2); Then I want to get only the numeric part of the returning value.I do that using the parseFloat() function.Have a look at the parseFloat() function.Finally with this bit of code I choose a ratio (I am devising a very simple algorithm for increasing and decreasing) and apply it to the <p> element. I still use the CSS function. You can get but also set the font size for a particular element with the CSS function.So I check for the id=increase and if this matches I will increase the font size of the <p> element.If it does not match we will decrease the font size. $('p').css('font-size', mynum / 1.2 + newmwasure); if(this.id == 'increase') { $('p').css('font-size', mynum * 1.4 + newmwasure); The code for the css file (style.css) followsbody{background-color:#eaeaea;}p{font-size:0.8em;font-family:Tahoma;}#resize{width:200px;background-color:#dadada;}#resize a {text-decoration:none;}The above CSS rules are very easy to understand. Now I save all my work.I view my page on the browser for the first time.Have a look at the picture below Now I increase the font size by clicking the respective linkHave a look at the picture below Finally I decrease the font size by clicking on the respective linkHave a look at the picture below Once more we see that the power and simplicity of JQuery library enables us to write less code but accomplish a lot at the same time. Hope it helps!!

Read the article

NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

- by Mike

I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

Read the article

SQL SERVER – Weekly Series – Memory Lane – #034

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 UDF – User Defined Function to Strip HTML – Parse HTML – No Regular Expression The UDF used in the blog does fantastic task – it scans entire HTML text and removes all the HTML tags. It keeps only valid text data without HTML task. This is one of the quite commonly requested tasks many developers have to face everyday. De-fragmentation of Database at Operating System to Improve Performance Operating system skips MDF file while defragging the entire filesystem of the operating system. It is absolutely fine and there is no impact of the same on performance. Read the entire blog post for my conversation with our network engineers. Delay Function – WAITFOR clause – Delay Execution of Commands How do you delay execution of the commands in SQL Server – ofcourse by using WAITFOR keyword. In this blog post, I explain the same with the help of T-SQL script. Find Length of Text Field To measure the length of TEXT fields the function is DATALENGTH(textfield). Len will not work for text field. As of SQL Server 2005, developers should migrate all the text fields to VARCHAR(MAX) as that is the way forward. Retrieve Current Date Time in SQL Server CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} There are three ways to retrieve the current datetime in SQL SERVER. CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} Explanation and Comparison of NULLIF and ISNULL An interesting observation is NULLIF returns null if it comparison is successful, whereas ISNULL returns not null if its comparison is successful. In one way they are opposite to each other. Here is my question to you - How to create infinite loop using NULLIF and ISNULL? If this is even possible? 2008 Introduction to SERVERPROPERTY and example SERVERPROPERTY is a very interesting system function. It returns many of the system values. I use it very frequently to get different server values like Server Collation, Server Name etc. SQL Server Start Time We can use DMV to find out what is the start time of SQL Server in 2008 and later version. In this blog you can see how you can do the same. Find Current Identity of Table Many times we need to know what is the current identity of the column. I have found one of my developers using aggregated function MAX () to find the current identity. However, I prefer following DBCC command to figure out current identity. Create Check Constraint on Column Some time we just need to create a simple constraint over the table but I have noticed that developers do many different things to make table column follow rules than just creating constraint. I suggest constraint is a very useful concept and every SQL Developer should pay good attention to this subject. 2009 List Schema Name and Table Name for Database This is one of the blog post where I straight forward display script. One of the kind of blog posts, which I still love to read and write. Clustered Index on Separate Drive From Table Location A table devoid of primary key index is called heap, and here data is not arranged in a particular order, which gives rise to issues that adversely affect performance. Data must be stored in some kind of order. If we put clustered index on it then the order will be forced by that index and the data will be stored in that particular order. Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. 2010 Data Pages in Buffer Pool – Data Stored in Memory Cache One of my earlier year article, which I still read it many times and point developers to read it again. It is clear from the Resultset that when more than one index is used, datapages related to both or all of the indexes are stored in Memory Cache separately. TRANSACTION, DML and Schema Locks Can you create a situation where you can see Schema Lock? Well, this is a very simple question, however during the interview I notice over 50 candidates failed to come up with the scenario. In this blog post, I have demonstrated the situation where we can see the schema lock in database. 2011 Solution – Puzzle – Statistics are not updated but are Created Once In this example I have created following situation: Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated Auto Update Statistics and Auto Create Statistics for database is TRUE Now I have requested two things in the example 1) Why this is happening? 2) How to fix this issue? Selecting Domain from Email Address This is a straight to script blog post where I explain how to select only domain name from entire email address. Solution – Generating Zero Without using Any Numbers in T-SQL How to get zero digit without using any digit? This is indeed a very interesting question and the answer is even interesting. Try to come up with answer in next 10 minutes and if you can’t come up with the answer the blog post read this post for solution. 2012 Simple Explanation and Puzzle with SOUNDEX Function and DIFFERENCE Function In simple words - SOUNDEX converts an alphanumeric string to a four-character code to find similar-sounding words or names. DIFFERENCE function returns an integer value. The integer returned is the number of characters in the SOUNDEX values that are the same. Read Only Files and SQL Server Management Studio (SSMS) I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. Identifying Column Data Type of uniqueidentifier without Querying System Tables How do I know if any table has a uniqueidentifier column and what is its value without using any DMV or System Catalogues? Only information you know is the table name and you are allowed to return any kind of error if the table does not have uniqueidentifier column. Read the blog post to find the answer. Solution – User Not Able to See Any User Created Object in Tables – Security and Permissions Issue Interesting question – “When I try to connect to SQL Server, it lets me connect just fine as well let me open and explore the database. I noticed that I do not see any user created instances but when my colleague attempts to connect to the server, he is able to explore the database as well see all the user created tables and other objects. Can you help me fix it?” Importing CSV File Into Database – SQL in Sixty Seconds #018 – Video Here is interesting small 60 second video on how to import CSV file into Database. ColumnStore Index – Batch Mode vs Row Mode Here is the logic behind when Columnstore Index uses Batch Mode and when it uses Row Mode. A batch typically represents about 1000 rows of data. Batch mode processing also uses algorithms that are optimized for the multicore CPUs and increased memory throughput. Follow up – Usage of $rowguid and $IDENTITY This is an excellent follow up blog post of my earlier blog post where I explain where to use $rowguid and $identity. If you do not know the difference between them, this is a blog with a script example. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Rapid Evolution of Society & Technology

- by Michael Snow

We caught up with Brian Solis on the phone the other day and Christie Flanagan had a chance to chat with him and learn a bit more about him and some of the concepts he'll be addressing in our Social Business Thought Leaders Webcast on Thursday 12/13/12. «--- Interview with Brian Solis Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast- mso-fareast-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Be sure and register for this week's webcast ---» ------------------- Guest post by Brian Solis. Reposted (Borrowed) from his posting of May 24, 2012 Dear [insert business name], what’s your promise? - Brian Solis You say you want to get closer to customers, but your actions are different than your words. You say you want to “surprise and delight” customers, but your product development teams are too busy building against a roadmap without consideration of the 5th P of marketing…people. Your employees are your number one asset, however the infrastructure of the organization has turned once optimistic and ambitious intrapreneurs into complacent cogs or worse, your greatest detractors. You question the adoption of disruptive technology by your internal champions yet you’ve not tried to find the value for yourself. You’re a change agent and you truly wish to bring about change, but you’ve not invested time or resources to answer “why” in your endeavors to become a connected or social business. If we are to truly change, we must find purpose. We must uncover the essence of our business and the value it delivers to traditional and connected consumers. We must rethink the spirit of today’s embrace and clearly articulate how transformation is going to improve customer and employee experiences and relationships now and over time. Without doing so, any attempts at evolution will be thwarted by reality. In an era of Digital Darwinism, no business is too big to fail or too small to succeed. These are undisciplined times which require alternative approaches to recognize and pursue new opportunities. But everything begins with acknowledging the 360 view of the world that you see today is actually a filtered view of managed and efficient convenience. Today, many organizations that were once inspired by innovation and engagement have fallen into a process of marketing, operationalizing, managing, and optimizing. That might have worked for the better part of the last century, but for the next 10 years and beyond, new vision, leadership and supporting business models will be written to move businesses from rigid frameworks to adaptive and agile entities. I believe that today’s executives will undergo a great test; a test of character, vision, intention, and universal leadership. It starts with a simple, but essential question…what is your promise? Notice, I didn’t ask about your brand promise. Nor did I ask for you to cite your mission and vision statements. This is much more than value propositions or manufactured marketing language designed to hook audiences and stakeholders. I asked for your promise to me as your consumer, stakeholder, and partner. This isn’t about B2B or B2C, but instead, people to people, person to person. It is this promise that will breathe new life into an organization that on the outside, could be misdiagnosed as catatonic by those who are disrupting your markets. A promise, for example, is meant to inspire. It creates alignment. It serves as the foundation for your vision, mission, and all business strategies and it must come from the top to mean anything. For without it, we cannot genuinely voice what it is we stand for or stand behind. Think for a moment about the definition of community. It’s easy to confuse a workplace or a market where everyone simply shares common characteristics. However, a community in this day and age is much more than belonging to something, it’s about doing something together that makes belonging matter The next few years will force a divide where companies are separated by intention as measured by actions and words. But, becoming a social business is not enough. Becoming more authentic and transparent doesn’t serve as a mantra for a renaissance. A promise is the ink that inscribes the spirit of the relationship between you and me. A promise serves as the words that influence change from within and change beyond the halls of our business. It is the foundation for a renewed embrace, one that must then find its way to every aspect of the organization. It’s the difference between a social business and an adaptive business. While an adaptive business can also be social, it is the culture of the organization that strives to not just use technology to extend current philosophies or processes into new domains, but instead give rise to a new culture where striving for relevance is among its goals. The tools and networks simply become enablers of a greater mission You are reading this because you believe in something more than what you’re doing today. While you fight for change within your organization, remember to aim for a higher purpose. Organizations that strive for innovation, imagination, and relevance will outperform those that do not. Part of your job is to lead a missionary push that unites the groundswell with a top down cascade. Change will only happen because you and other internal champions see what others can’t and will do what other won’t. It takes resolve. It takes the ability to translate new opportunities into business value. And, it takes courage. “This is a very noisy world, so we have to be very clear what we want them to know about us”-Steve Jobs ----------------------------------------------------------------- So -- where do you begin to evaluate the kind of experience you are delivering for your customers, partners, and employees? Take a look at this White Paper: Creating a Successful and Meaningful Customer Experience on the Web and then have a cup of coffee while you listen to the sage advice of Guy Kawasaki in a short video below. An interview with Guy Kawasaki on Maximizing Social Media Channels

Read the article

elffile: ELF Specific File Identification Utility

- by user9154181

Solaris 11 has a new standard user level command, /usr/bin/elffile. elffile is a variant of the file utility that is focused exclusively on linker related files: ELF objects, archives, and runtime linker configuration files. All other files are simply identified as "non-ELF". The primary advantage of elffile over the existing file utility is in the area of archives — elffile examines the archive members and can produce a summary of the contents, or per-member details. The impetus to add elffile to Solaris came from the effort to extend the format of Solaris archives so that they could grow beyond their previous 32-bit file limits. That work introduced a new archive symbol table format. Now that there was more than one possible format, I thought it would be useful if the file utility could identify which format a given archive is using, leading me to extend the file utility: % cc -c ~/hello.c % ar r foo.a hello.o % file foo.a foo.a: current ar archive, 32-bit symbol table % ar r -S foo.a hello.o % file foo.a foo.a: current ar archive, 64-bit symbol table In turn, this caused me to think about all the things that I would like the file utility to be able to tell me about an archive. In particular, I'd like to be able to know what's inside without having to unpack it. The end result of that train of thought was elffile. Much of the discussion in this article is adapted from the PSARC case I filed for elffile in December 2010: PSARC 2010/432 elffile Why file Is No Good For Archives And Yet Should Not Be Fixed The standard /usr/bin/file utility is not very useful when applied to archives. When identifying an archive, a user typically wants to know 2 things: Is this an archive? Presupposing that the archive contains objects, which is by far the most common use for archives, what platform are the objects for? Are they for sparc or x86? 32 or 64-bit? Some confusing combination from varying platforms? The file utility provides a quick answer to question (1), as it identifies all archives as "current ar archive". It does nothing to answer the more interesting question (2). To answer that question, requires a multi-step process: Extract all archive members Use the file utility on the extracted files, examine the output for each file in turn, and compare the results to generate a suitable summary description. Remove the extracted files It should be easier and more efficient to answer such an obvious question. It would be reasonable to extend the file utility to examine archive contents in place and produce a description. However, there are several reasons why I decided not to do so: The correct design for this feature within the file utility would have file examine each archive member in turn, applying its full abilities to each member. This would be elegant, but also represents a rather dramatic redesign and re-implementation of file. Archives nearly always contain nothing but ELF objects for a single platform, so such generality in the file utility would be of little practical benefit. It is best to avoid adding new options to standard utilities for which other implementations of interest exist. In the case of the file utility, one concern is that we might add an option which later appears in the GNU version of file with a different and incompatible meaning. Indeed, there have been discussions about replacing the Solaris file with the GNU version in the past. This may or may not be desirable, and may or may not ever happen. Either way, I don't want to preclude it. Examining archive members is an O(n) operation, and can be relatively slow with large archives. The file utility is supposed to be a very fast operation. I decided that extending file in this way is overkill, and that an investment in the file utility for better archive support would not be worth the cost. A solution that is more narrowly focused on ELF and other linker related files is really all that we need. The necessary code for doing this already exists within libelf. All that is missing is a small user-level wrapper to make that functionality available at the command line. In that vein, I considered adding an option for this to the elfdump utility. I examined elfdump carefully, and even wrote a prototype implementation. The added code is small and simple, but the conceptual fit with the rest of elfdump is poor. The result complicates elfdump syntax and documentation, definite signs that this functionality does not belong there. And so, I added this functionality as a new user level command. The elffile Command The syntax for this new command is elffile [-s basic | detail | summary] filename... Please see the elffile(1) manpage for additional details. To demonstrate how output from elffile looks, I will use the following files: FileDescription configA runtime linker configuration file produced with crle dwarf.oAn ELF object /etc/passwdA text file mixed.aArchive containing a mixture of ELF and non-ELF members mixed_elf.aArchive containing ELF objects for different machines not_elf.aArchive containing no ELF objects same_elf.aArchive containing a collection of ELF objects for the same machine. This is the most common type of archive. The file utility identifies these files as follows: % file config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: ascii text mixed.a: current ar archive, 32-bit symbol table mixed_elf.a: current ar archive, 32-bit symbol table not_elf.a: current ar archive same_elf.a: current ar archive, 32-bit symbol table By default, elffile uses its "summary" output style. This output differs from the output from the file utility in 2 significant ways: Files that are not an ELF object, archive, or runtime linker configuration file are identified as "non-ELF", whereas the file utility attempts further identification for such files. When applied to an archive, the elffile output includes a description of the archive's contents, without requiring member extraction or other additional steps. Applying elffile to the above files: % elffile config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: non-ELF mixed.a: current ar archive, 32-bit symbol table, mixed ELF and non-ELF content mixed_elf.a: current ar archive, 32-bit symbol table, mixed ELF content not_elf.a: current ar archive, non-ELF content same_elf.a: current ar archive, 32-bit symbol table, ELF 64-bit LSB relocatable AMD64 Version 1 The output for same_elf.a is of particular interest: The vast majority of archives contain only ELF objects for a single platform, and in this case, the default output from elffile answers both of the questions about archives posed at the beginning of this discussion, in a single efficient step. This makes elffile considerably more useful than file, within the realm of linker-related files. elffile can produce output in two other styles, "basic", and "detail". The basic style produces output that is the same as that from 'file', for linker-related files. The detail style produces per-member identification of archive contents. This can be useful when the archive contents are not homogeneous ELF object, and more information is desired than the summary output provides: % elffile -s detail mixed.a mixed.a: current ar archive, 32-bit symbol table mixed.a(dwarf.o): ELF 32-bit LSB relocatable 80386 Version 1 mixed.a(main.c): non-ELF content mixed.a(main.o): ELF 64-bit LSB relocatable AMD64 Version 1 [SSE]

Read the article

Random process hangs after clean install

- by Toshe

After installing fresh Kubuntu 11.04 Natty on my desktop PC, I experienced some issues with application and process hangs. There is also a problem with my USB 3 hard disk. These sort of problems did not happen on Kubuntu 10.10 installed on the same PC (on separate partition). The hangs manifest themselves with kernel log messages like these: [ 960.480151] INFO: task amarok:2505 blocked for more than 120 seconds. [ 960.480153] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 960.480155] amarok D 0000000000000000 0 2505 1 0x00000000 [ 960.480158] ffff8800a556bb38 0000000000000086 ffff8800a556bfd8 ffff8800a556a000 [ 960.480162] 0000000000013d00 ffff8800cb7f3178 ffff8800a556bfd8 0000000000013d00 [ 960.480165] ffffffff81a0b020 ffff8800cb7f2dc0 ffffea000242ac58 ffff88012704c870 [ 960.480169] Call Trace: [ 960.480172] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 960.480175] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 960.480180] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 960.480183] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 960.480186] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 960.480191] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 960.480194] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 960.480197] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 960.480200] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 960.480202] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 960.480205] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 960.480208] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 960.480210] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 960.480213] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 960.480216] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 960.480219] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 960.480222] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 960.480225] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 960.480228] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 960.480230] [<ffffffff81164360>] sys_open+0x20/0x30 [ 960.480233] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480027] INFO: task knotify4:1663 blocked for more than 120 seconds. [ 1080.480030] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480032] knotify4 D 0000000000000000 0 1663 1 0x00000000 [ 1080.480036] ffff880123a2bb28 0000000000000082 ffff880123a2bfd8 ffff880123a2a000 [ 1080.480040] 0000000000013d00 ffff880121003178 ffff880123a2bfd8 0000000000013d00 [ 1080.480044] ffff8800cb7e16e0 ffff880121002dc0 ffffffff81060a27 ffff88012704c870 [ 1080.480048] Call Trace: [ 1080.480054] [<ffffffff81060a27>] ? mutex_spin_on_owner+0x97/0xd0 [ 1080.480059] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480069] [<ffffffff812e4f61>] ? vsnprintf+0x221/0x620 [ 1080.480072] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480076] [<ffffffffa0b2d10f>] cx8802_request_acquire+0x5f/0xf0 [cx8802] [ 1080.480081] [<ffffffffa0e87e08>] mpeg_open+0x78/0x270 [cx88_blackbird] [ 1080.480084] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480092] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480096] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480099] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480102] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480105] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480108] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480111] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480113] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480116] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480119] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480122] [<ffffffff811663f1>] ? get_empty_filp+0xa1/0x170 [ 1080.480125] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480128] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480131] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480134] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480137] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480147] INFO: task dolphin:1842 blocked for more than 120 seconds. [ 1080.480148] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480150] dolphin D 0000000000000000 0 1842 1 0x00000004 [ 1080.480154] ffff8800cb4f3b38 0000000000000082 ffff8800cb4f3fd8 ffff8800cb4f2000 [ 1080.480157] 0000000000013d00 ffff8800cb7f4858 ffff8800cb4f3fd8 0000000000013d00 [ 1080.480161] ffffffff81a0b020 ffff8800cb7f44a0 ffffea000267b0d0 ffff88012704c870 [ 1080.480164] Call Trace: [ 1080.480168] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480171] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480176] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 1080.480179] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 1080.480181] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480186] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480190] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480192] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480195] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480198] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480200] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480203] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480206] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480208] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480211] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480214] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 1080.480217] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480220] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480223] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480225] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480228] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b Attempts to kill the hung process are unsuccessful: root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2747 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2749 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2751 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# When trying to access my external USB3 disk, the following kernel message is observed: [ 2169.330012] xhci_hcd 0000:06:00.0: Timeout while waiting for a slot [ 2169.330018] hub 3-0:1.0: couldn't allocate port 1 usb_device I am not sure the two problems (application hangs and USB3 timeouts are related) but they do not happen under Kubuntu 10.10. Judging by the dmesg messages, it looks to me that this is a kernel (or potentially kernel driver) problem, but not sure how to debug it. Any ideas? I ran apport-bug, but it advised me to post a question here first. Shall I report the issue on the official K/Ubuntu bugzilla?

Read the article

Big data: An evening in the life of an actual buyer

- by Jean-Pierre Dijcks

Here I am, and this is an actual story of one of my evenings, trying to spend money with a company and ultimately failing. I just gave up and bought a service from another vendor, not the incumbent. Here is that story and how I think big data could actually fix this (and potentially prevent some of this from happening). In the end this story should illustrate how big data can benefit me (get me what I want without causing grief) and the company I am trying to buy something from. Note: Lots of details left out, I have no intention of being the annoyed blogger moaning about a specific company. What did I want to get? We watch TV, we have internet and we do have a land line. The land line is from a different vendor then the TV and the internet. I have decided that this makes no sense and I was going to get a bundle (no need to infer who this is, I just picked the generic bundle word as this is what I want to get) of all three services as this seems to save me money. I also want to not talk to people, I just want to click on a website when I feel like it and get it all sorted. I do think that is reality. I want to just do my shopping at 9.30pm while watching silly reruns on TV. Problem 1 - Bad links So, I'm an existing customer of the company I want to buy my bundle from. I go to the website, I click on offers. Turns out they are offers for new customers. After grumbling about how good they are, I click on offers for existing customers. Bummer, it goes to offers for new customers, so I click again on the link for offers for existing customers. No cigar... it just does not work. Big data solutions: 1) Do not show an existing customer the offers for new customers unless they are the same => This is only partially doable without login, but if a customer logs in the application should always know that this is an existing customer. But in general, imagine I do this from my home going through the internet service of this vendor to their domain... an instant filter should move me into the "existing customer route". 2) Flag dead or incorrect links => I've clicked the link for "existing customer offers" at least 3 times in under 5 seconds... Identifying patterns like this is easy in Hadoop and can very quickly make a list of potentially incorrect links. No need for realtime fixing, just the fact that this link can be pro-actively fixed across my entire web domain is a good thing. Preventative maintenance! Problem 2 - Purchase cannot be completed Apart from the fact that the browsing pattern to actually get to what I want is poorly designed, my purchase never gets past a specific point. In other words, I put something into my shopping cart and when I want to move on the application either crashes (with me going to an error page) or hangs or goes into something like chat. So I try again, and again and again. I think I tried this entire path (while being logged in!!) at least 10 times over the course of 20 minutes. I also clicked on the feedback button and, frustrated as I was, tried to explain this did not work... Big Data Solutions: 1) This web site does shopping cart analysis. I got an email next day stating I have things in my shopping cart, just click here to complete my purchase. After the above experience, this just added insult to my pain... 2) What should have happened, is a Hadoop job going over all logged in customers that are on the buy flow. It should flag anyone who is trying (multiple attempts from the same user to do the same thing), analyze the shopping card, the clicks to identify what the customers wants, his feedback provided (note: always own your own website feedback, never just farm this out!!) and in a short turn around time (30 minutes to 2 hours or so) email me with a link to complete my purchase. Not with a link to my shopping cart 12 hours later, but a link to actually achieve what I wanted... Why should this company go through the big data effort? I do believe this is relatively easy to do using our Oracle Event Processing and Big Data Appliance solutions combined. It is almost so simple (to my mind) that it makes no sense that this is not in place? But, now I am ranting... Why is this interesting? It is because of $$$$. After trying really hard, I mean I did this all in the evening, and again in the morning before going to work. I kept on failing, But I really wanted this to work... so an email that said, sorry, we noticed you tried to get a bundle (the log knows what I wanted, where I failed, so easy to generate), here is the link to click and complete your purchase. And here is 2 movies on us as an apology would have kept me as a customer, and got the additional $$$$ per month for the next couple of years. It would also lead to upsell on my phone package etc. Instead, I went to a completely different company, bought service from them. Lost money for company A, negative sentiment for company A and me telling this story at the water cooler so I'm influencing more people to think negatively about company A. All in all, a loss of easy money, a ding in sentiment and image where a relatively simple solution exists and can be in place on the software I describe routinely in this blog... For those who are coming to Openworld and maybe see value in solving the above, or are thinking of how to solve this, come visit us in Moscone North - Oracle Red Lounge or in the Engineered Systems Showcase.

Read the article

Organization & Architecture UNISA Studies – Chap 4

- by MarkPearl

Learning Outcomes Explain the characteristics of memory systems Describe the memory hierarchy Discuss cache memory principles Discuss issues relevant to cache design Describe the cache organization of the Pentium Computer Memory Systems There are key characteristics of memory… Location – internal or external Capacity – expressed in terms of bytes Unit of Transfer – the number of bits read out of or written into memory at a time Access Method – sequential, direct, random or associative From a users perspective the two most important characteristics of memory are… Capacity Performance – access time, memory cycle time, transfer rate The trade off for memory happens along three axis… Faster access time, greater cost per bit Greater capacity, smaller cost per bit Greater capacity, slower access time This leads to people using a tiered approach in their use of memory As one goes down the hierarchy, the following occurs… Decreasing cost per bit Increasing capacity Increasing access time Decreasing frequency of access of the memory by the processor The use of two levels of memory to reduce average access time works in principle, but only if conditions 1 to 4 apply. A variety of technologies exist that allow us to accomplish this. Thus it is possible to organize data across the hierarchy such that the percentage of accesses to each successively lower level is substantially less than that of the level above. A portion of main memory can be used as a buffer to hold data temporarily that is to be read out to disk. This is sometimes referred to as a disk cache and improves performance in two ways… Disk writes are clustered. Instead of many small transfers of data, we have a few large transfers of data. This improves disk performance and minimizes processor involvement. Some data designed for write-out may be referenced by a program before the next dump to disk. In that case the data is retrieved rapidly from the software cache rather than slowly from disk. Cache Memory Principles Cache memory is substantially faster than main memory. A caching system works as follows.. When a processor attempts to read a word of memory, a check is made to see if this in in cache memory… If it is, the data is supplied, If it is not in the cache, a block of main memory, consisting of a fixed number of words is loaded to the cache. Because of the phenomenon of locality of references, when a block of data is fetched into the cache, it is likely that there will be future references to that same memory location or to other words in the block. Elements of Cache Design While there are a large number of cache implementations, there are a few basic design elements that serve to classify and differentiate cache architectures… Cache Addresses Cache Size Mapping Function Replacement Algorithm Write Policy Line Size Number of Caches Cache Addresses Almost all non-embedded processors support virtual memory. Virtual memory in essence allows a program to address memory from a logical point of view without needing to worry about the amount of physical memory available. When virtual addresses are used the designer may choose to place the cache between the MMU (memory management unit) and the processor or between the MMU and main memory. The disadvantage of virtual memory is that most virtual memory systems supply each application with the same virtual memory address space (each application sees virtual memory starting at memory address 0), which means the cache memory must be completely flushed with each application context switch or extra bits must be added to each line of the cache to identify which virtual address space the address refers to. Cache Size We would like the size of the cache to be small enough so that the overall average cost per bit is close to that of main memory alone and large enough so that the overall average access time is close to that of the cache alone. Also, larger caches are slightly slower than smaller ones. Mapping Function Because there are fewer cache lines than main memory blocks, an algorithm is needed for mapping main memory blocks into cache lines. The choice of mapping function dictates how the cache is organized. Three techniques can be used… Direct – simplest technique, maps each block of main memory into only one possible cache line Associative – Each main memory block to be loaded into any line of the cache Set Associative – exhibits the strengths of both the direct and associative approaches while reducing their disadvantages For detailed explanations of each approach – read the text book (page 148 – 154) Replacement Algorithm For associative and set associating mapping a replacement algorithm is needed to determine which of the existing blocks in the cache must be replaced by a new block. There are four common approaches… LRU (Least recently used) FIFO (First in first out) LFU (Least frequently used) Random selection Write Policy When a block resident in the cache is to be replaced, there are two cases to consider If no writes to that block have happened in the cache – discard it If a write has occurred, a process needs to be initiated where the changes in the cache are propagated back to the main memory. There are several approaches to achieve this including… Write Through – all writes to the cache are done to the main memory as well at the point of the change Write Back – when a block is replaced, all dirty bits are written back to main memory The problem is complicated when we have multiple caches, there are techniques to accommodate for this but I have not summarized them. Line Size When a block of data is retrieved and placed in the cache, not only the desired word but also some number of adjacent words are retrieved. As the block size increases from very small to larger sizes, the hit ratio will at first increase because of the principle of locality, which states that the data in the vicinity of a referenced word are likely to be referenced in the near future. As the block size increases, more useful data are brought into cache. The hit ratio will begin to decrease as the block becomes even bigger and the probability of using the newly fetched information becomes less than the probability of using the newly fetched information that has to be replaced. Two specific effects come into play… Larger blocks reduce the number of blocks that fit into a cache. Because each block fetch overwrites older cache contents, a small number of blocks results in data being overwritten shortly after they are fetched. As a block becomes larger, each additional word is farther from the requested word and therefore less likely to be needed in the near future. The relationship between block size and hit ratio is complex, and no set approach is judged to be the best in all circumstances. Pentium 4 and ARM cache organizations The processor core consists of four major components: Fetch/decode unit – fetches program instruction in order from the L2 cache, decodes these into a series of micro-operations, and stores the results in the L2 instruction cache Out-of-order execution logic – Schedules execution of the micro-operations subject to data dependencies and resource availability – thus micro-operations may be scheduled for execution in a different order than they were fetched from the instruction stream. As time permits, this unit schedules speculative execution of micro-operations that may be required in the future Execution units – These units execute micro-operations, fetching the required data from the L1 data cache and temporarily storing results in registers Memory subsystem – This unit includes the L2 and L3 caches and the system bus, which is used to access main memory when the L1 and L2 caches have a cache miss and to access the system I/O resources

Read the article

apache fails to connect to tomcat (Worker config?)

- by techventure

I have a tomcat 6 with follwoing server.xml: <Connector port="8253" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8445" acceptCount="100" debug="0" connectionTimeout="20000" disableUploadTimeout="true" /> <Connector port="8014" protocol="AJP/1.3" redirectPort="8445" /> and in added worker.properties: # Set properties for worker4 (ajp13) worker.worker4.type=ajp13 worker.worker4.host=localhost worker.worker4.port=8014 and i put in httpd.conf: JkMount /myWebApp/* worker4 It is not working a as trying to navigate to www1.myCompany.com/myWebApp gives "Service Temporarily Unavailable". I checked in tomcat catalina.out and it says: INFO: JK: ajp13 listening on /0.0.0.0:8014 UPDATE: i put mod_jk log level to debug and below is the result: [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_open::jk_uri_worker_map.c (770): rule map size is 8 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_add::jk_uri_worker_map.c (720): wildchar rule '/myWebApp/*=worker4' source 'JkMount' was added [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after map open: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] init_jk::mod_jk.c (3123): Setting default connection pool max size to 1 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.list' with value 'worker1,worker2,worker3,worker4' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.type' with value 'ajp13' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.host' with value 'localhost' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.port' with value '8014' to map. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_resolve_references::jk_map.c (774): Checking for references with prefix worker. with wildcard (recursion 1) [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_shm_calculate_size::jk_shm.c (132): shared memory will contain 4 ajp workers of size 256 and 0 lb workers of size 320 with 0 members of size 320+256 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [error] init_jk::mod_jk.c (3166): Initializing shm:/var/log/httpd/mod_jk.shm.9552 errno=13. Load balancing workers will not function properly. [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'ServerRoot' -> '/etc/httpd' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.list' -> 'worker1,worker2,worker3,worker4' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.port' -> '8009' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.port' -> '8010' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.port' -> '8112' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.port' -> '8014' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] build_worker_map::jk_worker.c (242): creating worker worker4 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_create_worker::jk_worker.c (146): about to create instance worker4 of ajp13 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_create_worker::jk_worker.c (159): about to validate and init worker4 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_validate::jk_ajp_common.c (2512): worker worker4 contact is 'localhost:8014' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2699): setting endpoint options: [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2702): keepalive: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2706): socket timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2710): socket connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2714): buffer size: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2718): pool timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2722): ping timeout: 10000 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2726): connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2730): reply timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2734): prepost timeout: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2738): recovery options: 0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2742): retries: 2 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2746): max packet size: 8192 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_init::jk_ajp_common.c (2750): retry interval: 100 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] ajp_create_endpoint_cache::jk_ajp_common.c (2562): setting connection pool size to 1 with min 1 and acquire timeout 200 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker worker4 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] wc_get_name_for_type::jk_worker.c (293): Found worker type 'ajp13' [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_ext::jk_uri_worker_map.c (512): Checking extension for worker 3: worker4 of type ajp13 (2) [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after extension stripping: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9552:3086317328] [debug] uri_worker_map_switch::jk_uri_worker_map.c (482): Switching uri worker map from index 0 to index 1 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_open::jk_uri_worker_map.c (770): rule map size is 8 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_add::jk_uri_worker_map.c (720): wildchar rule '/myWebApp/*=worker4' source 'JkMount' was added [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after map open: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #0: uri=/jsp-examples/* worker=worker1 context=/jsp-examples/* source=JkMount type=Wildchar len=15 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_set_time_fmt::jk_util.c (458): Pre-processed log time stamp format is '[%a %b %d %H:%M:%S %Y] ' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] init_jk::mod_jk.c (3123): Setting default connection pool max size to 1 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.list' with value 'worker1,worker2,worker3,worker4' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.type' with value 'ajp13' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.host' with value 'localhost' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_read_property::jk_map.c (491): Adding property 'worker.worker4.port' with value '8014' to map. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_resolve_references::jk_map.c (774): Checking for references with prefix worker. with wildcard (recursion 1) [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_shm_calculate_size::jk_shm.c (132): shared memory will contain 4 ajp workers of size 256 and 0 lb workers of size 320 with 0 members of size 320+256 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [error] init_jk::mod_jk.c (3166): Initializing shm:/var/log/httpd/mod_jk.shm.9553 errno=13. Load balancing workers will not function properly. [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'ServerRoot' -> '/etc/httpd' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.list' -> 'worker1,worker2,worker3,worker4' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker1.port' -> '8009' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker2.port' -> '8010' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker3.port' -> '8112' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.type' -> 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.host' -> 'localhost' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] jk_map_dump::jk_map.c (589): Dump of map: 'worker.worker4.port' -> '8014' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] build_worker_map::jk_worker.c (242): creating worker worker4 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_create_worker::jk_worker.c (146): about to create instance worker4 of ajp13 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_create_worker::jk_worker.c (159): about to validate and init worker4 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_validate::jk_ajp_common.c (2512): worker worker4 contact is 'localhost:8014' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2699): setting endpoint options: [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2702): keepalive: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2706): socket timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2710): socket connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2714): buffer size: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2718): pool timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2722): ping timeout: 10000 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2726): connect timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2730): reply timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2734): prepost timeout: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2738): recovery options: 0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2742): retries: 2 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2746): max packet size: 8192 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_init::jk_ajp_common.c (2750): retry interval: 100 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] ajp_create_endpoint_cache::jk_ajp_common.c (2562): setting connection pool size to 1 with min 1 and acquire timeout 200 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker worker4 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] wc_get_name_for_type::jk_worker.c (293): Found worker type 'ajp13' [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_ext::jk_uri_worker_map.c (512): Checking extension for worker 3: worker4 of type ajp13 (2) [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (171): uri map dump after extension stripping: index=0 file='(null)' reject_unsafe=0 reload=60 modified=0 checked=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 0: size=0 nosize=0 capacity=0 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (176): generation 1: size=8 nosize=0 capacity=8 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_dump::jk_uri_worker_map.c (186): NEXT (1) map #3: uri=/myWebApp/* worker=worker4 context=/myWebApp/* source=JkMount type=Wildchar len=6 [Wed Jun 13 18:44:26 2012] [9553:3086317328] [debug] uri_worker_map_switch::jk_uri_worker_map.c (482): Switching uri worker map from index 0 to index 1 [Wed Jun 13 18:44:26 2012] [9555:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9556:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9557:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9558:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9559:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9560:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9561:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9562:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9563:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9564:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9565:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9567:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9568:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9566:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9569:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:26 2012] [9570:3086317328] [debug] jk_child_init::mod_jk.c (3068): Initialized mod_jk/1.2.28 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1036): Attempting to map URI '/myWebApp/jsp/login.faces' from 8 maps [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/myWebApp/*=worker4' source 'JkMount' [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] find_match::jk_uri_worker_map.c (863): Found a wildchar match '/myWebApp/*=worker4' [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_handler::mod_jk.c (2459): Into handler jakarta-servlet worker=worker4 r->proxyreq=0 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker worker4 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker1 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker2 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker3 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_maintain::jk_worker.c (339): Maintaining worker worker4 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] wc_get_name_for_type::jk_worker.c (293): Found worker type 'ajp13' [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] init_ws_service::mod_jk.c (977): Service protocol=HTTP/1.1 method=GET ssl=false host=(null) addr=167.184.214.6 name=www1.myCompany.com.au port=80 auth=(null) user=(null) laddr=10.215.222.78 raddr=167.184.214.6 uri=/myWebApp/jsp/login.faces [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_get_endpoint::jk_ajp_common.c (2977): acquired connection pool slot=0 after 0 retries [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_service::jk_ajp_common.c (2283): processing worker4 with 2 retries [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_send_request::jk_ajp_common.c (1501): (worker4) all endpoints are disconnected. [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (452): socket TCP_NODELAY set to On [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (576): trying to connect socket 18 to 127.0.0.1:8014 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8014 failed (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8014) (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [error] ajp_send_request::jk_ajp_common.c (1507): (worker4) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_service::jk_ajp_common.c (2447): (worker4) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_service::jk_ajp_common.c (2304): retry 1, sleeping for 100 ms before retrying [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_send_request::jk_ajp_common.c (1501): (worker4) all endpoints are disconnected. [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (452): socket TCP_NODELAY set to On [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] jk_open_socket::jk_connect.c (576): trying to connect socket 18 to 127.0.0.1:8014 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8014 failed (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8014) (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [error] ajp_send_request::jk_ajp_common.c (1507): (worker4) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] ajp_service::jk_ajp_common.c (2447): (worker4) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [error] ajp_service::jk_ajp_common.c (2466): (worker4) connecting to tomcat failed. [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_reset_endpoint::jk_ajp_common.c (743): (worker4) resetting endpoint with sd = 4294967295 (socket shutdown) [Wed Jun 13 18:44:54 2012] [9555:3086317328] [debug] ajp_done::jk_ajp_common.c (2905): recycling connection pool slot=0 for worker worker4 [Wed Jun 13 18:44:54 2012] [9555:3086317328] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=worker4 The error i get in browser is: Service Temporarily Unavailable Apache/2.2.3 (Red Hat) Server at www1.myCompany.com.au Port 80 can someone please help and explain what is going on and how it can be resolved?

Search Results

Search found 11227 results on 450 pages for 'login attempts'.

Page 395/450 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402 | Next Page >

- by Jeremy

- by purefusion

- by Jeff

- by Hegelworm

- by zowens

- by ybbest

- by Sky Sanders

- by Rick Strahl

- by Rick Strahl

- by James Michael Hare

- by user12608080

- by SAMIR BHOGAYTA

- by trond-arne.undheim

- by Mark Virtue

- by Kevin Yang

- by Aurélien Momow

- by nikolaosk

- by Mike

- by Pinal Dave

- by Michael Snow

- by user9154181

- by Toshe

- by Jean-Pierre Dijcks

- by MarkPearl

- by techventure

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402 | Next Page >