Search Results

Search found 21995 results on 880 pages for 'round trip software eng'.

Page 395/880 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• Router for creating site to site VPN to server provider using Cisco ASA 5540

  - by fondie

  We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

  Read the article

• Create files on C:\ root gives error 0x80070522

  - by Bryan

  One of our customers has just found a problem when trying to create a file on the root of the C:\ Drive, on a Windows 7 Professional PC. I know they shouln't be keeping files here, but there is a valid reason in this case, so I've relaxed the security on the root of C:\ by giving the group 'users' modify permission. Before I relaxed the security, the user was receiving 'access denied', but now they are receiving the message: An unexpected error is keeping you from creating the file. If you continue to recieve this error, you can use the error code to search for help with this problem. Error 0x80070522: A required priviledge is not held by the client. Googling for this suggests that it is caused by UAC, but how can I get round this when the user doesn't have admin rights on their PC?

  Read the article

• LVS TCP connection timeouts - lingering connections

  - by Jon Topper

  I'm using keepalived to load-balance connections between a number of TCP servers. I don't expect it matters, but the service in this case is rabbitmq. I'm using NAT type balancing with weighted round-robin. A client connects to the server thus: [client]-----------[lvs]------------[real server] a b If a client connects to the LVS and remains idle, sending nothing on the socket, this eventually times out, according to timeouts set using ipvsadm --set. At this point, the connection marked 'a' above correctly disappears from the output of netstat -anp on the client, and from the output of ipvsadm -L -n -c on the lvs box. Connection 'b', however, remains ESTABLISHED according to netstat -anp on the real server box. Why is this? Can I force lvs to properly reset the connection to the real server?

  Read the article

• VMRC equivalent for Hyper-V?

  - by Ian Boyd

  VMRC was the client tool used to connect to virtual machines running on Virtual Server. Upgrading to Windows Server 2008 R2 with the Hyper-V role, i need a way for people to be able to use the virtual machines. Note: not all virtual machines will have network connectivity not all virtual machines will be running Windows some people needing to connect to a virtual machine will be running Windows XP Hyper-V manager, allowing management of the hyper-v server, is less desirable (since it allows management of the hyper-v server (and doesn't work on all operating systems)) What is the Windows Server 2008 R2 equivalent of VMRC; to "vnc" to a virtual server? Update: i think Tatas was suggesting Microsoft System Center Virtual Machine Manager Self-Service Portal 2.0 (?): Which requires SQL Server IIS Installing those would unfortunately violate our Windows Server 2008 R2 license. i might be looking at the wrong product link, since commenter said there is a version that doesn't require "System Center". Update 2: The Windows Server 2008 R2 running HyperV is being licensed with the understanding that it only be used to host HyperV. From the [Windows Server 2008 R2 Licensing FAQ][4]: Q. If I have one license for Windows Server 2008 R2 Standard and want to run it in a virtual operating system environment, can I continue running it in the physical operating system environment? A. Yes, with Windows Server 2008 R2 Standard, you may run one instance in the physical operating system environment and one instance in the virtual operating system environment; however, the instance running in the physical operating system environment may be used only to run hardware virtualization software, provide hardware virtualization services, or to run software to manage and service operating system environments on the licensed server. This is why i'm weary about installing IIS or SQL Server.

  Read the article

• psexec: "Access is Denied"?

  - by Electrons_Ahoy

  Inspired by my previous question here, I've been experimenting with PSExec. The goal is to trip off some fairly simple scripts / programs on one WindowsXP machine from another, and as PowerShell 2 doesn't yet do remoting on XP, PSexec seems like it'll solve my problems nicely. However, I can't get anything but the "Access is Denied" error. Here's what I've tried so far: I've got a pair of WindowsXP MCE machines, networked together in a workgroup without a server or domain controller. I've turned off "simple file sharing" on both machines. Under the security policy, Network Access: Sharing and Security model for local accounts is set to Classic, not Guest for both machines. There is an Administrative user for each computer that I know the passwords to. :) With all that, a command like "> psexec \\otherComputer -u adminUser cmd" prompts for the password (like it should) and then exits with: Couldn't access otherComputer: Access is denied. So, at this point I turn to the community. What step am I missing here?

  Read the article

• Windows 7 Backup not backing up custom library?

  - by James McMahon

  I have created a custom Library under Windows 7 64bit professional to handle my source code. When I tried Windows Backup and Restore for the first time I get the following error Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\Source. Error:(The system cannot find the file specified. (0x80070002)) I've found a thread on the error on the Microsoft answers site. But it appears to be 404 (there is a version in Google's Cache) and the thread starter never gets an answer to his issue that works. The official Microsoft answer on this is This problem is due to one or more profiles under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList with missing ProfileImagePath. To check whether you have missing profiles: Open regedit, navigate to the above registry key. (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList). Expand the list Click on each of the profiles listed. The first 3 profiles should have ProfileImagePath value of %SystemRoot%\System32\Config\SystemProfile, %SystemRoot%\ServiceProfiles\LocalService, and %SystemRoot%\ServiceProfiles\NetworkService respectively. Starting from the 4th profile, the ProfileImagePath should contain path to the user profiles on your machine, such as C:\users\Christine If one or more of the profile has no profile image, then you have missing profiles. To work around this, delete the profile in question (Caution: The registry contains critical settings that are necessary for your system to function properly. Take extra caution while making changes) First, export the ProfileList key for safekeeping. (Right click on the key, choose “Export”, and save it to the desktop.) Right click on the profile in question, choose delete. Try backup again. This does not work for me. Anyone have any idea what is going on here?

  Read the article

• NPS EAP authentication failing after Windows Update

  - by sqlreader

  I have a Windows 2008 Std server running NPS. After applying the latest round of updates (including Root Certificates for April 2012 KB931125 (See:http://support.microsoft.com/kb/933430/)), EAP authentication is failing due to being malformed. Sample error (Security/Event ID 6273), truncated for brevity: Authentication Details: Proxy Policy Name: Use Windows authentication for all users Network Policy Name: Wireless Access Authentication Provider: Windows Authentication Server: nps-host.corp.contoso.com Authentication Type: PEAP EAP Type: - Account Session Identifier: - Reason Code: 266 Reason: The message received was unexpected or badly formatted. The NPS policy (Wireless Access) is configured accordingly (for Constraints/Authentication methods) EAP Types: Microsoft: Protected EAP (PEAP) - with a valid certificate from ADCS Microsoft: Secured password (EAP-MSCHAP v2) Less secure authentication methods: Microsoft Encrypted Authentication version 2 (MS-CHAP-v2) User can change password after it has expired Microsoft Encrypted Authentication (MS-CHAP) User can change password after it has expired We've tested a different RADIUS server without the aforementioned patch, and removed EAP as an authentication type and experienced success. Has anyone else experienced this issue?

  Read the article

• Why does traceroute take much longer than ping?

  - by PHP

  How to explain this? C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [64.233.189.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 7 ms <1 ms <1 ms reserve.cableplus.com.cn [218.242.223.209] 3 108 ms 135 ms 163 ms 211.154.70.10 4 * * * Request timed out. 5 2 ms * 1 ms 211.154.64.114 6 1 ms 1 ms 1 ms 211.154.72.185 7 1 ms 1 ms 1 ms 202.96.222.77 8 2 ms 1 ms 2 ms 61.152.81.145 9 1 ms 2 ms 1 ms 61.152.86.54 10 1 ms 1 ms 1 ms 202.97.33.238 11 2 ms 2 ms 2 ms 202.97.33.54 12 2 ms 1 ms 2 ms 202.97.33.5 13 33 ms 33 ms 33 ms 202.97.61.50 14 34 ms 34 ms 34 ms 202.97.62.214 15 34 ms 186 ms 37 ms 209.85.241.56 16 35 ms 35 ms 44 ms 66.249.94.34 17 34 ms 34 ms 34 ms hkg01s01-in-f104.1e100.net [64.233.189.104] Trace complete. So average time should be :1+7+108+2+1+1+2+1+1+2+2+33+34+34+35+34+34+35+34,which is a lot bigger than ping C:\Documents and Settings\Administrator>ping google.com Pinging google.com [64.233.189.104] with 32 bytes of data: Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Ping statistics for 64.233.189.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 34ms, Maximum = 34ms, Average = 34ms

  Read the article

• What is there in Win 7 Pro (or Ultimate) that is not there in Home Premium? - Especially considering this situation..

  - by Senthil

  I want to know the REAL difference between Windows 7 Home Premium and Professional/Utimate. In India, the cost of different versions: Ultimate - 11,200 INR Professional - 10,700 INR Home Premium - 6,600 INR The absolute cost of the first two is so high to me that the difference (500 INR) doesn't matter. So to me there is really no choice between the first two - If I decide to buy the Professional version, I'd rather go for Ultimate itself. What I want to know is, whether Home Premium is enough for my needs. I tried searching for comparison but many look like just marketing junk from MS. They are short and vague. According to this page, the major differences between Pro and HomePremium are Run many Windows XP productivity programs in Windows XP Mode. Connect to company networks easily and more securely with Domain Join. You can do both in Pro but not in Home Premium. I intend to use my Windows 7 for a small business - just starting up. So I'll be dealing with the following: All kinds of development tools, servers Very important - I will run Virtual Machine Software (MS VPC or VMWare or Sun VirtualBox etc..) My system will be acting as the server for most purposes till I can afford dedicated servers. Connect the system to a variety of network devices (PCs, Printers, etc..) Run productivity, business and financial apps Any other small software startup business requirement that I haven't thought of yet. Professional (and Ultimate) is twice as expensive as Home Premium. So it'd be great if someone can point out the things you cannot do with Home Premium, when you use it like I explained above, so that I can make a decision about which one to buy. I need some real-life experiences so that I can make an informed decision - not a decision based on marketing junk.

  Read the article

• List of Hidden / Virtual Windows User Accounts

  - by Synetech inc.

  I’m trying to find a way to get a comprehensive list of user accounts on a Windows 7 system, including hidden ones. The User Accounts dialog (>control userpasswords2) only shows the normal user accounts, and even the Local User and Groups editor only shows normal user accounts and standard hidden/disabled ones like Administrator and Guest. The Select Users or Groups dialog has a Find Now button which which combines users and groups, but alas, it has the same contents as the LUG. I’m looking for a more comprehensive list that includes “super-hidden” / virtual user accounts like TrustedInstaller (or to be more accurate, NT Service\TrustedInstaller—notice the different “domain”). I checked HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList, but the SpecialAccounts key does not exist. I also checked HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList, and while it does have the SystemProfile, LocalService, and NetworkService accounts listed, it does not have others (like TrustedInstaller and its ilk). TrustedInstaller specifically is a little confusing because it is a user, a service, and an executable file. I am using it as an example because it is “super hidden” in that it does not seem to be listed in any sort of user list. (As an experiment, I tried searching the whole registry for “trustedinstaller” to see if I could find a place where it is listed as a user, but found none.) To be clear, what I am looking for is a list of all accounts that can be used in a user input-field such as in permissions dialogs or as a runas argument.

  Read the article

• Ubuntu Server running VNC

  - by xwapilot

  I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

  Read the article

• Reverse proxy for mailserver (SMTP + HTTP for web client)

  - by gaqzi

  I'm looking at doing some reverse proxy work for a mail server with corresponding web client. Both servers are running on the same machine, this is not a server with a high load. :) The solution I've discussed with friends is having the mail server/web client on our internal network. Then to put a reverse proxy on the DMZ to service both SMTP and web client HTTP-traffic to the mail server on the internal network. From what I understand this is the recommended secure solution? So far I've thought for the SMTP-proxy part of using postfix which will receive mail, do some spamhause and similar anti-spam measures and if it all checks out, send the mail to the mail server on the inside. The mail server on the inside will send all outgoing mail to the proxy which will then send it out on the Internet. For the web client I'm not sure exactly which software I should be running on the proxy machine, I've been thinking about using Squid -- but that's basically based on the fact that I know squid is a http proxy. The web client data will be sent out over SSL. Reading around some here on Serverfault I've seen other people using Apache with mod_proxy+mod_security for similar situations. Am I thinking correctly for this solution? What software would you guys use and with which modules? Thanks in advance for the help! :)

  Read the article

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by Puddingfox

  I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

  Read the article

• Setting up a network e-mail server

  - by Jason

  Hello, My boss just asked me to buy a new server for our office network. I know next to nothing about servers and networking, so I need someone to point me in the right direction. He said he wants this to be our e-mail server with a network login. I have no idea how to set up an e-mail server, especially one that sends/receives e-mail using our domain name. We use a terrible piece of order/inventory software called Mail Order Manager (MOM). Our computers currently connect to the MOM database through a networked drive. My boss would like to move away from this peer-to-peer MOM setup. The software publisher offers a SQL version of MOM, but it's way overpriced. Is there a better way to connect to these databases without using the SQL version? Finally, the server needs to be running Windows. Does this question make sense, is it possible, and can someone help me get started? Thanks!

  Read the article

• Drive XML returning Windows Volume Shadow Service Error

  - by Ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• My computer loses network connectivity every 30 minutes

  - by Logan Garland

  My LAN connected PC loses network connectivity every 30 minutes. It has a static IP address and I've checked to make sure there aren't any IP conflicts on my network. If I'm streaming from that PC to my Xbox the stream will be interrupted and it normally takes about a minute to come back online. The same happens if I'm actually on the PC and just browsing the web. I'm looking for suggestions on how to track down this issue. I've tried checking the available logs on my router to see if there is an issue with DCHP but have been unsuccessful in finding any evidence. Any suggestions would be helpful. I can't think of any recent changes to my network, PC or software installations that may have caused this. I am a software developer and have intermediate networking knowledge. EDIT: During one outage I told windows to troubleshoot the network problem and it said that it could automatically fix the problem by changing DCHP info. It basically said my network adapter from static to automatically obtain. This did fix the issue quicker than just waiting it out, but the outage occurred again 30 minutes later even when leaving those settings.

  Read the article

• 3d Studio Max and 2+CPUs - Core limit ?

  - by FreekOne

  Hi guys, I am scouting for parts to put in a new machine, and in the process, while looking at different benchmarks I stumbled upon this benchmark and it got me a bit worried. Quote form it: Noticably absent from this review is an old-time favorite, 3ds Max. I did attempt to run our custom 3ds Max benchmark on both the 2009 and 2010 versions of the software, but the application would simply not load on the Westmere box with hyper-threading enabled. Evidently Autodesk didn't plan far enough ahead to write their software for more than 16 threads. Once there is an update that addresses this issue, I will happily add 3ds Max back into the benchmarking mix. Since I was looking at dual hexa-core Xeons (x5650), that would put my future machine at 24 logical cores which (duh) is well over 16 cores and since I'm mostly building this for 3DS Max work, you can see how this would seriously spoil my plans. I tried looking for additional information on this potential issue, but the above article seems to be the only one who mentions it. Could anyone who has access to a 16 core machine or an in-depth knowledge about 3DS Max please confirm this ? Any help would be much appreciated !

  Read the article

• Windows 7 search doesn’t find text strings

  - by Hugh Tash

  I’m not able to find any text strings starting not from the beginning of word in filename or in file content using Windows 7 search. My Windows 7 search configuration: Let’s say I’m searching for a documents containing word “content”. I’m able to find those documents when searching for “content”, “conte”, “con” (as long as the string includes the beginning of the word). "content" "con" But if I search for “ontent”, “tent” or any other combination that doesn’t include the beginning of the word, Windows search won't find it. I've tried other indexing/searching software such as Copernic Desktop search, Google desktop search. Those programs also weren’t able to find part of the word starting from the middle of the word. For instance, it finds “conte”, but doesn’t find “onte”. Finds “conte” Doesn’t find “onte” I got the same problem using Copernic desktop search. On the other hand, when I use non-indexing content search software such as Agent Ransack or FileSeek, I get the same results when searching for “conte” or “onte”: “conte” “onte” Why do all pre-indexing content search applications (Windows search, Google desktop, Copernic desktop search) fail to search for a string inside the words? Why do non-indexing applications find text strings wherever they are: in the beginning, middle or end of the word? I’ve tried wildcards and other constructions with no luck. *onte onte “onte” content:onte content:onte content:~onte All these searched doesn’t find the word “content”. How can I make Windows search find strings from any part of words? Could you try these searches and see if they work for you? Or is this normal behavior? Thank you. Update: Using wildcards before or after "onte" doesn't find any results. content:~=onte doesn't find any results.

  Read the article

• Can't install Visual Studio 2010 SP1 from an .ISO file I downloaded. Error inside

  - by Sergio

  This is the error: [Window Title] C:\Users\Sergio\Desktop\Things\Setup.exe [Content] The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. [OK] I'm running Windows 7 (64bit) Ultimate and have installed this service pack before (2 days ago) on another machine with similar specs and the same exact OS software. I've tried mounting the .ISO file to a virtual drive and installing from there and I get that error. I've tried mounting the .ISO and copy pasting the files to a local folder on my drive and then running the setup.exe application, and I get that error. I don't know how to proceed but can provide any additional information you require from me. What can I do to fix this? Edit If I right click Setup.exe and Run As Administrator, I get the following error: [Window Title] C:\Users\Sergio\Desktop\Things\Setup.exe [Content] Windows cannot find 'C:\Users\Sergio\Desktop\Things\Setup.exe'. Make sure you typed the name correctly, and then try again. [OK] I've already tried re downloading the ISO from the site, but a quick check of the bytes of the file assures me that the ISO on my drive is 100% correctly downloaded. I get the same amount of bytes in size from the downloading ISO (as Opera reports).

  Read the article

• Active Directory using Samba/Open LDAP for user accounts

  - by Jon Rhoades

  I know this is the wrong way round... but Is it possible to use AD in front of Samba for our PC clients, so that the user accounts are in Samba/Open LDAP. Managing our fleet of Windows PC's is becoming more and more difficult with just Samba v3 - until Samba v4 comes along, it would be great if we could leverage Active Directory, but have the accounts stored in Samba/Open LDAP. Windows PC's are a minority in our organisation & Samaba/Open LDAP are used for just about every service (Zimbra/RADIUS/Intranet/SAN/Printing/...) so it will have to remain the definitive account source. Anyway, it probably can't be done, but I thought I would ask for ideas anyway.

  Read the article

• How do I add a VMware ESXi Host to Microsoft Virtual Machine Manager?

  - by user63250

  I am trying to manage virtual machines running on a VMware ESXi host using Microsoft System Center Virtual Machine Manager. I was able to add the ESXi machine using the "Add VMware VirtualCenter server" option, but can't access any of the VMs on the datastore associated with this ESXi server. The datastore of the ESXi box is showing up with the correct name, but it won't let me see any of the VMs that have already been created; I get "There are no virtual machines on this host." Because I couldn't get any of the existing virtual machines to show up, I tried creating some new ones. When using VMM to connect to ESXi and create new VMs, I get the following error messages in the "rating explanation" section: The virtualization software on the selected host does not support virtual hard disks on an IDE bus. and The virtualization software on the host XXXXXX does not support the creation of dynamic virtual hard disk. Any ideas on why I can't manage existing machines and why I can't create new ones? The existing machines were created in vSphere. I should note that the ESXi server and the server running SCVMM are both on the same domain. I should also note that although the ESXi box has been added as a VirtualCetner server, when I try to add it through the "Add Host" option, I get an error message saying "Virtual Machine Manager cannot complete the VirtualCenter action on server EXSi because of the following error: The operation is not supported on the object."

  Read the article

• How to back up non-standard directories in my user profile with Windows Backup?

  - by James Johnston

  I'm using Windows Backup to back up my Win7 Pro laptop. I'd like to use it to back up my complete user profile, but I only see standard profile directories (e.g. C:\Users\JohnstonJ\Documents) in the list. Non-standard ones aren't there (e.g. C:\Users\JohnstonJ\MyCustomDirectory). What's the best way to handle this? The only thing I can think of is to browse under the "Computer" entry and navigate directly to C:\Users\JohnstonJ and check off the entire profile (to get what's in there, and any new directories that come up). But is that going to back up the profile twice? Cause other unforeseen problems given that I checked it off by navigating through the computer, rather than picking it under the "Data Files" category? (e.g. back up temporary file garbage, files in use problems, etc. that the "Data Files" category might be handling better). Looking for solutions that other people use that are known to work well and still uses the Windows Backup software - I don't really want to fuss with 3rd-party backup software. Example - as you can see, I have two directories in my profile that Windows Backup is not offering to back up: "Dropbox" and "New folder": (Link to images album because I don't have enough reputation to directly embed them: http://imgur.com/a/Xyv5u)

  Read the article

• cpanel dns only / rdns questions

  - by Clear.Cache

  I started getting IPs from ARIN directly, instead of the data center I'm colocated at. Now I have to start applying rdns myself for my clients upon request, instead of having the NOC at the DC do this. That is obvious, since I am in full control over the IP delegation and therefore have nameserver authority. The question is, how do I "create" ptr / rdns records for my clients? My current server uses Cpanel / WHM with ns1/ns2.mycompany.com I also applied those as dns nameservers in the ARIN IP's whois record. How do I create rdns for my clients? Should I install Cpanel DNS Only on a entirely separate server and use this method instead? http://layer1.cpanel.net/ If so, how can I seamlessly transition over the dns records to that new dns server, retaining my ns1/ns2.mycompany.com and their ns1 and ns2 IP addresses? Even more important: I have to change the ns1/ns2 IPs to the new ones I retrieve from ARIN. How can this be done, avoiding downtime during the dns transition? On a side note, would it be easier to just install Cpanel DNS Only on a dedicated server and just use dns1.mycompany.com and dns2.mycompany.com with their own dedicated ns1/ns2 IPs from ARIN - and utilize this dns server for customers who request rdns? Would this be a more viable solution than using our current ns1/ns2.mycompany.com Nameservers? Is Cpanel DNS Only a standalone software that does not require Cpanel/WHM on another server? Is it possible to have redundant dns servers setup using this software solely, ns1 on one server and ns2 on another? Thanks.

  Read the article

• Wifi Drops Connections with WPA2-PSK

  - by graf_ignotiev

  I run a small computer lab made up of 10 computers of identical hardware and software (Dell Latitudes with Windows 7 x64 Enterprise) and I use a ZyWALL 2WG as a router/firewall. Nine of the computers connect to the router over wifi using WPA2-PSK encryption while the last one is connected by ethernet cable. I'm having a problem where any computer connected to the wi-fi occasionally drops off the network (it cannot be pinged and the client cannot ping the gateway). It only happens on the wifi side and only when the encryption is WPA2-PSK or WPA-PSK. I tried using another router with a different make and model and had no problems. Thinking it could be a software error, I reset the router to factory defaults and installed the newest firmware (V4.04(AQI.8) | 04/09/2010), but still have the problem. The 802.1X log gives the following error User logout because of user disassociation. with this note WPA2-PSK:00242c582ece:logout where 00242c582ece is the mac address of the device. At this point I'm out of things to try and leads to follow. It looks like this user had the same or similar problem, but none of those proposed solutions work for me.

  Read the article

• Explorer and open file dialog not responding (Vista)

  - by rohancragg

  Any explorer window opened for the first time on my machine causes the explorer window to display the folders tree and folder path in the address bar immediately but the file/folder list pane is blank and the window displays 'Not Responding' in the title bar, this hangs for up to a minute or more. Any file dialog displays 'Not Responding' in the title bar. The files list is eventually displayed after a few seconds or more. Steps to repro: Close all open instances of explorer Windows Key | Run | [enter a folder path such as 'c:\temp'] Or within any app: use a file open / save dialog Once there is at least one open instance of explorer the performance is still fairly poor but not nearly so bad and file lists are displayed in a timely fashion. What I've tried: Cleaned up registry with CCleaner tool, and uninstalled all other unused software Checked nothing unwanted running at startup with Autoruns Removed any ISO burner/recorder/mount software Still to try Get latest version of everything - especially stuff with shell extension behaviour such as TortoiseSVN Anyone have any other suggestions? Thanks alot. Update I'm wondering if this is related, I'll try the hotfix when I get home and report back: KB972685 - FIX:Explorer.exe hangs when using a shell extension written using MFC Update 2 Before I got a chance to try the hotfix it seems one of the above actions fixed this for me; either the removal of IsoRecorder or TortoiseHg (which I was no longer using anyway). Update 3 A similar issue with Explorer.exe has come back since installing TortoiseHg 1.01 :-(

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >