Search Results

Search found 22211 results on 889 pages for 'client identifier'.

Page 396/889 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

  - by Liath

  I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

  Read the article

• All in a Day's Work: Unblocking Multiple Downloaded Files with a Single Command

  - by Sam Abraham

  Files downloaded using Internet Explorer retain Internet Zone permission level and hence are “Blocked” by default on Windows 7 machines. Honestly, while an added overhead for developers; I really appreciate this feature as it provides a good protection layer for casual web users. My workaround is to simply unblock the downloaded zip file (if download was a zip file) which, in turn, unblocks the files stored within. Today however, I was left with a situation where I had to “Open” and “Copy” the content rather than “Save” a zip file. That of course left me with a few dozen files I have to manually unblock. A few minutes of internet search lead me to the link below which worked like a charm: 1-Download streams.exe from SystInternals - http://technet.microsoft.com/en-us/sysinternals/bb897440.aspx 2-Go to command prompt (cmd.exe) 3-Navigate to where you have streams.exe installed 4-Use command line switches: streams.exe –s –d “<folder path>” This removed the Internet Zone restrictions from all files under “<folder path>” and its subfolders as well. [Deleted :Zone.Identifier:$DATA] References: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/806f0104-1caa-4a66-b504-7a681d1ccb33/

  Read the article

• Would form keys reduce the amount of spam we receive?

  - by David Wilkins

  I work for a company that has an online store, and we constantly have to deal with a lot of spam product reviews, and bogus customer accounts. These are all created by automated systems and are more of a nuisance than anything. What I am thinking of (in lieu of captcha, which can be broken) is adding a sort of form key solution to all relevant forms. I know for certain some of the spammers are using XRumer, and I know they seldom request a page before sending us the form data (Is this the definition of CSRF?) so I would think that tying a key to each requested form would at least stem the tide. I also know the spammers are lazy and don't check their work, or they would see that we have never posted a spam review, and they have never gained any revenue from our site. Would this succeed in significantly reducing the volume of spam product reviews and customer account creations we are seeing? EDIT: To clarify what I mean by "Form Keys": I am referring to creating a unique identifier (or "key") that will be used as an invisible, static form field. This key will also be stored either in the database (relative to the user session) or in a cookie variable. When the form's target gets a request, the key must be validated for the form's data to be processed. Those pesky bots won't have the key because they don't load the javascript that generates the form (they just send a blind request to the target) and even if they did load the javascript once, they'd only have one valid key, and I'm not sure they even use cookies.

  Read the article

• Colored Collision Detection

  - by tugrul büyükisik

  Several years ago, i made a fast collision detection for 2D, it was just checking a bullets front-pixel's color to check if it were to hit something. Lets say the target rgb color is (124,200,255) then it just checks for that color. After the collision detection, it paints the target with appropriate picture. So, collision detection is made in background without drawing but then painted and drawed. How can i do this in 3D? Because, a vertex is not just exist like a 2D picture's pixel. I looked at some java3D and other programs and understood that 3D world is made of objects. Not just pictures. Is there a program that truly fills the world with vertices ? But it could be needing terabytes of ram even more. Do you know an easy way to interpolate the color of a vertex in java3D or similar program? Note: for a rgb color-identifier, i can make 255*255*255 different 2D objects in background.

  Read the article

• Banshee gapless playback does not work when playing mp3s

  - by ComputerGuy505

  Even though I have gapless playback enabled in Banshee's settings menu, there is a very short pause between songs. This might be due to the fact that my hard drive's partitions seem wierd. fdisk -l produces this output: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4a73c3cb Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 724153740 361872070+ 7 HPFS/NTFS/exFAT /dev/sda3 1456826368 1465145343 4159488 c W95 FAT32 (LBA) /dev/sda4 724154366 1456826367 366336001 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 1440159744 1456826367 8333312 82 Linux swap / Solaris /dev/sda6 724154368 1440159743 358002688 83 Linux Partition table entries are not in disk order Playing mp3's from /dev/sda2 or /dev/sda6 produces this problem. I don't seem to have gapless playback on Rhythmbox or Clementine either, if those media players are supposed to have it. I'm not sure what other info to provide. This is just annoying to me. Thanks for any help.

  Read the article

• USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

  - by Glyn Normington

  After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

  Read the article

• Is browser and bot whitelisting a practical approach?

  - by Sn3akyP3t3

  With blacklisting it takes plenty of time to monitor events to uncover undesirable behavior and then taking corrective action. I would like to avoid that daily drudgery if possible. I'm thinking whitelisting would be the answer, but I'm unsure if that is a wise approach due to the nature of deny all, allow only a few. Eventually someone out there will be blocked unintentionally is my fear. Even so, whitelisting would also block plenty of undesired traffic to pay per use items such as the Google Custom Search API as well as preserve bandwidth and my sanity. I'm not running Apache, but the idea would be the same I'm assuming. I would essentially be depending on the User Agent identifier to determine who is allowed to visit. I've tried to take into account for accessibility because some web browsers are more geared for those with disabilities although I'm not aware of any specific ones at the moment. The need to not depend on whitelisting alone to keep the site away from harm is fully understood. Other means to protect the site still need to be in place. I intend to have a honeypot, checkbox CAPTCHA, use of OWASP ESAPI, and blacklisting previous known bad IP addresses.

  Read the article

• Adding root bone in 3DS Max?

  - by carlturtle

  my animation artist has made me a nice first person pair of arms, animated it, textured it, and given it to me. Then he went on vacation. I am programming my animations, and I am trying to test the model he has given me. Building my project gives me a warning: Multiple skeletons were found in the file. The first skeleton, named "frame l upperarm" has been moved to be a child of the scene root. The other, "frame r upperarm", will be ignored. Fragment identifier "frame r upperarm". Then an error: "Vertex is bound to bone "frame l forearm", but this bone is not present in the skeleton." I realize this means that there are two skeletons, as said in this problem: Importing 3d model with multiple skeletons I have 3DS Max, but I have no idea how to use it, and Google/CGTalk/Plycount turn up nothing relevant on how to add a root bone or combine skeletons. If anyone knows how, it would help me out greatly. Thanks.

  Read the article

• The latest version of the EJB 3.2 spec available on java.net project

  - by Marina Vatkina

  If you are not following us on the users alias, here is a quick update. Just before JavaOne, I uploaded the latest version of the EJB 3.2 Core document to the ejb-spec.java.net downloads. If you want to see the detailed changes, download it If you are interested in the high-level list, or would like to know what to look for, this is the list of changes since the previous version (found on the same download page): Specified that the SessionContext object in a the singleton session bean is thread-safe Clarified that the EJB timers distribution and failover rules apply only to persistent timers Clarified that non-persistent timers returned by getTimers and getAllTimers methods are from the same JVM as the caller Fixed section numbering (left over after moving it to its own chapter) in Ch 17 Noted that only 3.0 and 3.1 deployment descriptors are required to be supported in EJB 3.2 Lite for prior versions of the applications Fixes for EJB_SPEC-61 (Ambiguity in EJB lite local view support) and EJB_SPEC-59 (Improve references to the component-defining annotations) JMS/MDB changes: added new standard activation properties and the unique identifier, and rearranged sections for easier navigation Fixed unresolved cross-refs Updated the rule: only local asynchronous session bean invocations are supported in EJB 3.2 Lite Synchronized permissions in the Table with the permissions listed for the EJB Components in the Java EE Platform Specification Table EE.6-2 Specified that during processing of the close() method, the embeddable container cancels all pending asynchronous invocations and non-persistent timers Updated most of the referenced documents to their latest versions Happy reading!

  Read the article

• Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• Am I missing something about these considerations about Leaderboard's database's schema?

  - by misiMe

  I just finished to develop a mobile game, now I want to implement an online leaerboard using mysql. I'm wondering about the database's schema, I thought about some possibilities: (I didn't got in detail with syntax because my question is just about the logic of it) Name: string; Score: integer I thought to ask the name just the first time. If, in the future, you will modify that, it will call just an update to the name associated with your id. Leaderboard(ID, Name, Score) ID: integer autoincrement, PrimaryKey With this kind of idea maybe the db will grow fast because if you choose everytime a different name for the score, it will add a new entry. Leaderboard(PhoneId, Name, Score) Here PhoneId will be the unique identifier of the phone, PrimaryKey. A con of this choice is that if you want to play with your friends' phone, you can't put a different name for the score. Leaderboard(Name, Score) Here Name is PrimaryKey. With that, if you enter a name that already exists, you will be prompted to choose another one. Do you agree with this considerations? What will you do? Am I missing something?

  Read the article

• Cryptswap not mounted?

  - by woody

  I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 The file /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla already exists and its contents are: [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Is my swap not setup correctly or is it not mounting?

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

• Installing ubuntu 12.04 on macbook pro9,2

  - by stariz77

  I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

  Read the article

• External Full HD monitor and Virtual Desktop Size

  - by Stefan

  I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

  Read the article

• Ubuntu 14.04: Fine tuning Touchpad for ThinkPad S431

  - by ramgorur

  I am using Ubuntu 14.04 on Lenovo ThinkPad S431. The touchpad is very bumpy, tricky to use. Slides down with a small touch, sometimes jerks erratically. I have tried to modify the settings in /usr/share/X11/xorg.conf.d/50-synaptics.conf file as below -- Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "JumpyCursorThreshold" "250" Option "VertResolution" "100" # Option "HorizResolution" "65" # Option "MinSpeed" "1" # Option "MaxSpeed" "1" # Option "AccelerationProfile" "1" # Option "AdaptiveDeceleration" "8" # Option "ConstantDeceleration" "1" # Option "VelocityScale" "128" Option "HorizHysteresis" "150" Option "VertHysteresis" "150" EndSection There are lots of options here, does anyone know how to get a fine-tuned values for the above options (for ThinkPad S431)? The Hysteresis values seems to alleviate the problem a little bit, but failed to get a perfect result. EDIT: According to this bug report for ThinkPad X230 (+X230t), I set these values and quite good for now -- Option "VertResolution" "100" Option "HorizResolution" "65" Option "MinSpeed" "1" Option "MaxSpeed" "1" Option "AccelerationProfile" "2" Option "AdaptiveDeceleration" "16" Option "ConstantDeceleration" "16" Option "VelocityScale" "32" Option "HorizHysteresis" "50" Option "VertHysteresis" "50" and then you need to increase the cursor speed manually from the Unity mouse settings. But I am still looking for a fully functional (possibly with all the gestures) and a fine-tuned touchpad settings for S431. Further help is appreciated.

  Read the article

• Connecting two monitors at the corners

  - by fastmultiplication

  I am using two separate X screens on two monitors and I would like them to be connected at the lower right corner. That is, if you move to the lower right corner of screen0 the mouse should appear at the upper left of screen1. I do not want an entire edge of each monitor to be permeable to the mouse. I modified the xorg.conf file like so: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Relative "Screen0" 1200 1000 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection (screen 0's resolution is 1280x1024) so there is a bit of overlap. However whenever I move the mouse to the bottom of screen0, the pointer appears at the upper left of screen1. And, the entire top of screen1 is permeable to the mouse and brings it to the lower left corner of screen0. I have tried various numbers in following the "relative" statement - if I put 1280 1024 the mouse does not cross over at all. If I use 1280 1023 the entire right side of screen0 is permeable. I haven't been able to find any documentation about how to explicitly tell the mouse where to crossover - is there some? It seems that xorg is being really aggressive in guessing where the mouse crossover should take place. Does anyone know how to do this? Thanks!

  Read the article

• How do I configure an Intel HD Graphics 4000?

  - by derabbink

  First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

  Read the article

• My new hard drive won't automount on boot

  - by user518

  I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• Partitions mixing up

  - by anon

  I am trying to install ubuntu alongside my windows 7. The problem is that ubuntu is not detecting all of my partitions and basically clubs together many of them. The same thing is done by using GParted. However this problem does not arise while I am using Windows - 7. I cant paste the image of GParted since I dont have the required reputation... I think this could be due to stray GPT data but am not sure how to take care of it. Can someone help me figure this out ? The output of fdisk -l is as follows Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20000000 Device Boot Start End Blocks Id System /dev/sda1 63 2047 992+ 42 SFS /dev/sda2 * 2048 206847 102400 42 SFS /dev/sda3 206848 146802687 73297920 42 SFS /dev/sda4 146802688 625140399 239168856 42 SFS However actually I have 4 partitions along with 25 gb unallocated space that I had thought to use for Ubuntu installation.

  Read the article

• File Adapter FileName Macros

  - by IntegrationOverload

  I can never find these when I need them...   Macro name Substitute value %datetime% Coordinated Universal Time (UTC) date time in the format YYYY-MM-DDThhmmss (for example, 1997-07-12T103508). %datetime_bts2000% UTC date time in the format YYYYMMDDhhmmsss, where sss means seconds and milliseconds (for example, 199707121035234 means 1997/07/12, 10:35:23 and 400 milliseconds). %datetime.tz% Local date time plus time zone from GMT in the format YYYY-MM-DDThhmmssTZD, (for example, 1997-07-12T103508+800). %DestinationParty% Name of the destination party. The value comes from the message context property BTS.DestinationParty. %DestinationPartyQualifier% Qualifier of the destination party. The value comes from the message context property BTS.DestinationPartyQualifier. %MessageID% Globally unique identifier (GUID) of the message in BizTalk Server. The value comes directly from the message context property BTS.MessageID. %SourceFileName% Name of the file from where the File adapter read the message. The file name includes the extension and excludes the file path, for example, Sample.xml. When substituting this property, the File adapter extracts the file name from the absolute file path stored in the FILE.ReceivedFileName context property. If the context property does not have a value, for example, if a message was received on an adapter other than the File adapter, the macro will not be substituted and will remain in the file name as is (for example, C:\Drop\%SourceFileName%). %SourceParty% Name of the source party from which the File adapter received the message. %SourcePartyQualifier% Qualifier of the source party from which the File adapter received the message. %time% UTC time in the format hhmmss. %time.tz% Local time plus time zone from GMT in the format hhmmssTZD (for example, 124525+530).

  Read the article

• Is it justified to use project-wide unique function and variable names to help future refactoring?

  - by kahoon

  Refactoring tools (like ReSharper) often can't be sure whether to rename a given identifier when, for example refactoring a JavaScript function. I guess this is a consequence of JavaScript's dynamic nature. ReSharper solves this problem by offering to rename reasonable lexical matches too. The developer can opt out of renaming certain functions, if he finds that the lexical match is purely accidental. This means that the developer has to approve every instance that will be affected by the renaming. For example let's consider we have two Backbone classes which are used completely independently from each other in our application: var Header = Backbone.View.extend({ close: function() {...} }) var Dialog = Backbone.View.extend({ close: function() {...} }) If you try to rename Dialog's close method to for example closeAndNotify, then ReSharper will offer to rename all occurences of Header's close method just because they are the same lexically prior to the renaming. To avoid this problem, please consider this: var Header = Backbone.View.extend({ closeHeader: function() {...} }) var Dialog = Backbone.View.extend({ closeDialog: function() {...} }) Now you can rename closeDialog unambiguously - given that you have no other classes having a method with the same name. Is it worth it to name my functions this way to help future refactoring?

  Read the article

• How do I get my internal HDD to mount at startup?

  - by el_gallo_azul

  It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

  Read the article

• I am getting an error with a oneToMany association when using annotations with gilead for hibernate

  - by user286630

  Hello Guys I'm using Gilead to persist my entities in my GWT project, im using hibernate annotations aswell. my problem is on my onetomany association.this is my User class that holds a reference to a list of FileLocations @Entity @Table(name = "yf_user_table") public class YFUser implements Serializable { @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "user_id",nullable = false) private int userId; @Column(name = "username") private String username; @Column(name = "password") private String password; @Column(name = "email") private String email; @OneToMany(cascade = CascadeType.ALL, fetch = FetchType.LAZY) @JoinColumn(name="USER_ID") private List fileLocations = new ArrayList(); This is my file location class @Entity @Table(name = "fileLocationTable") public class FileLocation implements Serializable { @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "locationId", updatable = false, nullable = false) private int ieId; @Column (name = "location") private String location; @ManyToOne(fetch=FetchType.LAZY) @JoinColumn(name="USER_ID", nullable=false) private YFUser uploadedUser; When i persist this data in a normal desktop application, it works fine , creates the tables and i can add and store data to it. but when i try to persist the data in my gwt application i get errors i will show them lower. this is my ServiceImpl class that extends PersistentRemoteService. public class TestServiceImpl extends PersistentRemoteService implements TestService { public static final String SESSION_USER = "UserWithinSession"; public TestServiceImpl(){ HibernateUtil util = new HibernateUtil(); util.setSessionFactory(com.example.server.HibernateUtil .getSessionFactory()); PersistentBeanManager pbm = new PersistentBeanManager(); pbm.setPersistenceUtil(util); pbm.setProxyStore(new StatelessProxyStore()); setBeanManager(pbm); } @Override public String registerUser(String username, String password, String email) { Session session = com.example.server.HibernateUtil.getSessionFactory().getCurrentSession(); session.beginTransaction(); YFUser newUser = new YFUser(); newUser.setUsername(username);newUser.setPassword(password);newUser.setEmail(email); session.save(newUser); session.getTransaction().commit(); return "Thank you For registering "+ username; } this is the error that im am getting. the error goes away when i remove my onetoManyRelationship and builds my session factory when i put it in , it on the line of buildsessionfactory in hibernate Util that it throws this exception. my hibernate util class is ok also. this is the error java.lang.NoSuchMethodError: javax.persistence.OneToMany.orphanRemoval()Z Mar 24, 2010 10:03:22 PM org.hibernate.cfg.annotations.Version <clinit> INFO: Hibernate Annotations 3.5.0-Beta-4 Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Environment <clinit> INFO: Hibernate 3.5.0-Beta-4 Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Environment <clinit> INFO: hibernate.properties not found Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Environment buildBytecodeProvider INFO: Bytecode provider name : javassist Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Environment <clinit> INFO: using JDK 1.4 java.sql.Timestamp handling Mar 24, 2010 10:03:22 PM org.hibernate.annotations.common.Version <clinit> INFO: Hibernate Commons Annotations 3.2.0-SNAPSHOT Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Configuration configure INFO: configuring from resource: /hibernate.cfg.xml Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Configuration getConfigurationInputStream INFO: Configuration resource: /hibernate.cfg.xml Mar 24, 2010 10:03:22 PM org.hibernate.cfg.Configuration doConfigure INFO: Configured SessionFactory: null Mar 24, 2010 10:03:22 PM org.hibernate.cfg.search.HibernateSearchEventListenerRegister enableHibernateSearch INFO: Unable to find org.hibernate.search.event.FullTextIndexEventListener on the classpath. Hibernate Search is not enabled. Mar 24, 2010 10:03:22 PM org.hibernate.cfg.AnnotationBinder bindClass INFO: Binding entity from annotated class: com.example.client.Entity1 Mar 24, 2010 10:03:22 PM org.hibernate.cfg.annotations.EntityBinder bindTable INFO: Bind entity com.example.client.Entity1 on table entityTable1 Mar 24, 2010 10:03:22 PM org.hibernate.cfg.AnnotationBinder bindClass INFO: Binding entity from annotated class: com.example.client.YFUser Mar 24, 2010 10:03:22 PM org.hibernate.cfg.annotations.EntityBinder bindTable INFO: Bind entity com.example.client.YFUser on table yf_user_table Initial SessionFactory creation failed.java.lang.NoSuchMethodError: javax.persistence.OneToMany.orphanRemoval()Z [WARN] Nested in javax.servlet.ServletException: init: java.lang.ExceptionInInitializerError at com.example.server.HibernateUtil.<clinit>(HibernateUtil.java:38) at com.example.server.TestServiceImpl.<init>(TestServiceImpl.java:29) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39 ) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle(RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488) Caused by: java.lang.NoSuchMethodError: javax.persistence.OneToMany.orphanRemoval()Z at org.hibernate.cfg.AnnotationBinder.processElementAnnotations(AnnotationBinder.java:1642) at org.hibernate.cfg.AnnotationBinder.bindClass(AnnotationBinder.java:772) at org.hibernate.cfg.AnnotationConfiguration.processArtifactsOfType(AnnotationConfiguration.java:629) at org.hibernate.cfg.AnnotationConfiguration.secondPassCompile(AnnotationConfiguration.java:350) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1373) at org.hibernate.cfg.AnnotationConfiguration.buildSessionFactory(AnnotationConfiguration.java:973) at com.example.server.HibernateUtil.<clinit>(HibernateUtil.java:33) ... 26 more [WARN] Nested in java.lang.ExceptionInInitializerError: java.lang.NoSuchMethodError: javax.persistence.OneToMany.orphanRemoval()Z at org.hibernate.cfg.AnnotationBinder.processElementAnnotations(AnnotationBinder.java:1642) at org.hibernate.cfg.AnnotationBinder.bindClass(AnnotationBinder.java:772) at org.hibernate.cfg.AnnotationConfiguration.processArtifactsOfType(AnnotationConfiguration.java:629) at org.hibernate.cfg.AnnotationConfiguration.secondPassCompile(AnnotationConfiguration.java:350) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1373) at org.hibernate.cfg.AnnotationConfiguration.buildSessionFactory(AnnotationConfiguration.java:973) at com.example.server.HibernateUtil.<clinit>(HibernateUtil.java:33) at com.example.server.TestServiceImpl.<init>(TestServiceImpl.java:29) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle(RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488)

  Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >