day cq - Page 396 - Developer IT

SQL SERVER – Service Broker and CAP_CPU_PERCENT – Limiting SQL Server Instances to CPU Usage

- by pinaldave

I have mentioned several times on this blog that the best part of blogging is the questions I receive from readers. They are often very interesting. The questions from readers give me a good idea what other readers might be thinking as well. After reading my earlier article Simple Example to Configure Resource Governor – Introduction to Resource Governor – I received an email from a reader and we exchanged a few emails. After exchanging emails we both figured out what is going on. It was indeed interesting and reader suggested to that I should blog about it. I asked for permission to publish his name but he does not like the attention so we will just call him Jeff. I have converted our emails into chat for easy consumption. Jeff: Your script does not work at all. I think either there is a bug in SQL Server. Pinal: Would you please explain in detail? Jeff: Your code does not limit the CPU usage? Pinal: How did you measure it? Jeff: Well, we have third party tools for it but let us say I have limited the resources for Reporting Services and used your script described in your blog. After that I ran only reporting service workload the CPU is still used more than 100% and it is not limited to 30% as described in your script. Clearly something is wrong somewhere. Pinal: Did you say you ONLY ran reporting server load? Jeff: Yeah, to validate I ran ONLY reporting server load and CPU did not throttle at 30% as per your script. Pinal: Oh! I get it here is the answer - CAP_CPU_PERCENT = 30. Use it. Jeff: What is that, I think your earlier script says it will throttle the Reporting Service workload and Application/OLTP workload and balance it. Pinal: Exactly, that is correct. Jeff: You need to write more in email buddy! Just like your blogs, your answers do not make sense! No Offense! Pinal: Hmm…feedback well taken. Let me try again. In SQL Server 2012 there are a few enhancements with regards to SQL Server Resource Governor. One of the enhancement is how the resources are allocated. Let me explain you with examples. Configuration: [Read Earlier Post] Reporting Workload: MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30 Application/OLTP Workload: MIN_CPU_PERCENT=50, MAX_CPU_PERCENT=100 Example 1: If there is only Reporting Workload on the server: SQL Server will not limit usage of CPU to only 30% workload but SQL Server instance will use all available CPU (if needed). In another word in this scenario it will use more than 30% CPU. Example 2: If there is Reproting Workload and heavy Application/OLTP workload: SQL Server will allocate a maximum of 30% CPU resources to Reporting Workload and allocate remaining resources to heavy application/OLTP workload. The reason for this enhancement is for better utilization of the resources. Let us think, if there is only single workload, which we have limited to max CPU usage to 30%. The other unused available CPU resources is now wasted. In this situation SQL Server allows the workload to use more than 30% resources leading to overall improved/optimized performance. However, in the case of multiple workload where lots of resources are needed the limits specified in MAX_CPU_PERCENT are acknowledged. Example 3: If there is a situation where the max CPU workload has to be enforced: This is a very interesting scenario, in the case when the max CPU workload has to be enforced irrespective of the workload and enhanced algorithm, the keyword CAP_CPU_PERCENT is essential. It specifies a hard cap on the CPU bandwidth that all requests in the resource pool will receive. It will never let CPU usage for reporting workload to go over 30% in our case. You can use the key word as follows: -- Creating Resource Pool for Report Server CREATE RESOURCE POOL ReportServerPool WITH ( MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30, CAP_CPU_PERCENT=40, MIN_MEMORY_PERCENT=0, MAX_MEMORY_PERCENT=30) GO Notice that there is MAX_CPU_PERCENT=30 and CAP_CPU_PERCENT=40, what it means is that when SQL Server Instance is under heavy load under different workload it will use the maximum CPU at 30%. However, when the SQL Server instance is not under workload it will go over the 30% limit. However, as CAP_CPU_PERCENT is set to 40, it will not go over 40% in any case by limiting the usage of CPU. CAP_CPU_PERCENT puts a hard limit on the resources usage by workload. Jeff: Nice Pinal, you should blog about it. [A day passes by] Pinal: Jeff, it is done! Click here to read it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Service Broker

Read the article

Use Advanced Font Ligatures in Office 2010

- by Matthew Guay

Fonts can help your documents stand out and be easier to read, and Office 2010 helps you take your fonts even further with support for OpenType ligatures, stylistic sets, and more. Here’s a quick look at these new font features in Office 2010. Introduction Starting with Windows 7, Microsoft has made an effort to support more advanced font features across their products. Windows 7 includes support for advanced OpenType font features and laid the groundwork for advanced font support in programs with the new DirectWrite subsystem. It also includes the new font Gabriola, which includes an incredible number of beautiful stylistic sets and ligatures. Now, with the upcoming release of Office 2010, Microsoft is bringing advanced typographical features to the Office programs we love. This includes support for OpenType ligatures, stylistic sets, number forms, contextual alternative characters, and more. These new features are available in Word, Outlook, and Publisher 2010, and work the same on Windows XP, Vista and Windows 7. Please note that Windows does include several OpenType fonts that include these advanced features. Calibri, Cambria, Constantia, and Corbel all include multiple number forms, while Consolas, Palatino Linotype, and Gabriola (Windows 7 only) include all the OpenType features. And, of course, these new features will work great with any other OpenType fonts you have that contain advanced ligatures, stylistic sets, and number forms. Using advanced typography in Word To use the new font features, open a new document, select an OpenType font, and enter some text. Here we have Word 2010 in Windows 7 with some random text in the Gabriola font. Click the arrow on the bottom of the Font section of the ribbon to open the font properties. Alternately, select the text and click Font. Now, click on the Advanced tab to see the OpenType features. You can change the ligatures setting… Choose Proportional or Tabular number spacing… And even select Lining or Old-style number forms. Here’s a comparison of Lining and Old-style number forms in Word 2010 with the Calibri font. Finally, you can choose various Stylistic sets for your font. The dialog always shows 20 styles, whether or not your font includes that many. Most include only 1 or 2; Gabriola includes 6. Here’s lorem ipsum text, using the Gabriola font with Stylistic set 6. Impressive, huh? The font ligatures change based on context, so they will automatically change as you are typing. Watch the transition as we typed the word Microsoft in Word with Gabriola stylistic set 6. Here’s another example, showing the fi and tt ligatures in Calibri. These effects work great in Word 2010 in XP, too. And, since Outlook uses Word as it’s editing engine, you can use the same options in Outlook 2010. Note that these font effects may not show up the same if the recipient’s email client doesn’t support advanced OpenType typography. It will, of course, display perfectly if the recipient is using Outlook 2010. Using advanced typography in Publisher 2010 Publisher 2010 includes the same advanced font features. This is especially nice for those using Publisher for professional layout and design. Simply insert a text box, enter some text, select it, and click the arrow on the bottom of the font box as in Word to open the font properties. This font options dialog is actually more advanced than Word’s font options. You can preview your font changes on sample text right in the properties box. You can also choose to add or remove a swash from your characters. Conclusion Advanced typographical effects are a welcome addition to Word and Publisher 2010, and they are very impressive when coupled with modern fonts such as Gabriola. From designing elegant headers to using old-style numbers, these features are very useful and fun. Do you have a favorite OpenType font that includes advanced typographical features? Let us know in the comments! More Reading Advances in typography in Windows 7 – Engineering 7 Blog New features in Microsoft Word 2010 Similar Articles Productive Geek Tips Change the Default Font in Excel 2007Ask the Readers: Do You Use a Laptop, Desktop, or Both?Keep Websites From Using Tiny Fonts in SafariAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteFriday Fun: Desktop Tower Defense Pro TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users

Read the article

It’s nice to be important, but it’s more important to be nice

- by BuckWoody

I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge. (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot) I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea! No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example. Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement. Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.” Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you. The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.” The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person. Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way. OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

ODI and OBIEE 11g Integration

- by David Allan

Here we will see some of the connectivity options to OBIEE 11g using the JDBC driver. You’ll see based upon some connection properties how the physical or presentation layers can be utilized. In the integrators guide for OBIEE 11g you will find a brief statement indicating that there actually is a JDBC driver for OBIEE. In OBIEE 11g its now possible to connect directly to the physical layer, Venkat has an informative post here on this topic. In ODI 11g the Oracle BI technology is shipped with the product along with KMs for reverse engineering, and using OBIEE models for a data source. When you install OBIEE in 11g a light weight demonstration application is preinstalled in the server, when you open this in the BI Administration tool we see the regular 3 panel view within the administration tool. To interrogate this system via JDBC (just like ODI does using the KMs) need a couple of things; the JDBC driver from OBIEE 11g, a java client program and the credentials. In my java client program I want to connect to the OBIEE system, when I connect I can interrogate what the JDBC driver presents for the metadata. The metadata projected via the JDBC connection’s DatabaseMetadata changes depending on whether the property NQ_SESSION.SELECTPHYSICAL is set when the java client connects. Let’s use the sample app to illustrate. I have a java client program here that will print out the tables in the DatabaseMetadata, it will also output the catalog and schema. For example if I execute without any special JDBC properties as follows; java -classpath .;%BIHOMEDIR%\clients\bijdbc.jar meta_jdbc oracle.bi.jdbc.AnaJdbcDriver jdbc:oraclebi://localhost:9703/ weblogic mypass Then I get the following returned representing the presentation layer, the sample I used is XML, and has no schema; Catalog Schema Table Sample Sales Lite null Base Facts Sample Sales Lite null Calculated Facts … Sample Targets Lite null Base Facts … Now if I execute with the only difference being the JDBC property NQ_SESSION.SELECTPHYSICAL with the value Yes, then I see a different set of values representing the physical layer in OBIEE; java -classpath .;%BIHOMEDIR%\clients\bijdbc.jar meta_jdbc oracle.bi.jdbc.AnaJdbcDriver jdbc:oraclebi://localhost:9703/ weblogic mypass NQ_SESSION.SELECTPHYSICAL=Yes The following is returned; Catalog Schema Table Sample App Lite Data null D01 Time Day Grain Sample App Lite Data null F10 Revenue Facts (Order grain) … System DB (Update me) … If this was a database system such as Oracle, the catalog value would be the OBIEE database name and the schema would be the Oracle database schema. Other systems which have real catalog structure such as SQLServer would use its catalog value. Its this ‘Catalog’ and ‘Schema’ value that is important when integration OBIEE with ODI. For the demonstration application in OBIEE 11g, the following illustration shows how the information from OBIEE is related via the JDBC driver through to ODI. In the XML example above, within ODI’s physical schema definition on the right, we leave the schema blank since the XML data source has no schema. When I did this at first, I left the default value that ODI places in the Schema field since which was ‘<Undefined>’ (like image below) but this string is actually used in the RKM so ended up not finding any tables in this schema! Entering an empty string resolved this. Below we see a regular Oracle database example that has the database, schema, physical table structure, and how this is defined in ODI. Remember back to the physical versus presentation layer usage when we passed the special property, well to do this in ODI, the data server has a panel for properties where you can define key/value pairs. So if you want to select physical objects from the OBIEE server, then you must set this property. An additional changed in ODI 11g is the OBIEE connection pool support, this has been implemented via a ‘Connection Pool’ flex field for the Oracle BI data server. So here you set the connection pool name from the OBIEE system that you specifically want to use and this is used by the Oracle BI to Oracle (DBLINK) LKM, so if you are using this you must set this flex field. Hopefully a useful insight into some of the mechanics of how this hangs together.

Read the article

Lessons from a SAN Failure

- by Bill Graziano

At 1:10AM Sunday morning the main SAN at one of my clients suffered a “partial” failure. Partial means that the SAN was still online and functioning but the LUNs attached to our two main SQL Servers “failed”. Failed means that SQL Server wouldn’t start and the MDF and LDF files mostly showed a zero file size. But they were online and responding and most other LUNs were available. I’m not sure how SANs know to fail at 1AM on a Saturday night but they seem to. From a personal standpoint this worked out poorly: I was out with friends and after more than a few drinks. From a work standpoint this was about the best time to fail you could imagine. Everything was running well before Monday morning. But it was a long, long Sunday. I started tipsy, got tired and ended up hung over later in the day. Note to self: Try not to go out drinking right before the SAN fails. This caught us at an interesting time. We’re in the process of migrating to an entirely new set of servers so some things were partially moved. This made it difficult to follow our procedures as cleanly as we’d like. The benefit was that we had much better documentation of everything on the server. I would encourage everyone to really think through the process of implementing your DR plan and document as much as possible. Following a checklist is much easier than trying to remember at night under pressure in a hurry after a few drinks. I had a series of estimates on how long things would take. They were accurate for any single server failure. They weren’t accurate for a SAN failure that took two servers down. This wasn’t bad but we should have communicated better. Don’t forget how many things are outside the database. Logins, linked servers, DTS packages (yikes!), jobs, service broker, DTC (especially DTC), database triggers and any objects in the master database are all things you need backed up. We’d done a decent job on this and didn’t find significant problems here. That said this still took a lot of time. There were many annoyances as a result of this. Small settings like a login’s default database had a big impact on whether an application could run. This is probably the single biggest area of concern when looking to recreate a server. I’d encourage everyone to go through every single node of SSMS and look for user created objects or settings outside the database. Script out your logins with the proper SID and already encrypted passwords and keep it updated. This makes life so much easier. I used an approach based on KB246133 that worked well. I’ll get my scripts posted over the next few days. The disaster can cause your DR process to fail in unexpected ways. We have a job that scripts out all logins and role memberships and writes it to a file. This runs on the DR server and pulls from the production server. Upon opening the file I found that the contents were a “server not found” error. Fortunately we had other copies and didn’t need to try and restore the master database. This now runs on the production server and pushes the script to the DR site. Soon we’ll get it pushed to our version control software. One of the biggest challenges is keeping your DR resources up to date. Any server change (new linked server, new SQL Server Agent job, etc.) means that your DR plan (and scripts) is out of date. It helps to automate the generation of these resources if possible. Take time now to test your database restore process. We test ours quarterly. If you have a large database I’d also encourage you to invest in a compressed backup solution. Restoring backups was the single larger consumer of time during our recovery. And yes, there’s a database mirroring solution planned in our new architecture. I didn’t have much involvement in things outside SQL Server but this caused many, many things to change in our environment. Many applications today aren’t just executables or web sites. They are a combination of those plus network infrastructure, reports, network ports, IP addresses, DTS and SSIS packages, batch systems and many other things. These all needed a little bit of attention to make sure they were functioning properly. Profiler turned out to be a handy tool. I started a trace for failed logins and kept that running. That let me fix a number of problems before people were able to report them. I also ran traces to capture exceptions. This helped identify problems with linked servers. Overall the thing that gave me the most problem was linked servers. In order for a linked server to function properly you need to be pointed to the right server, have the proper login information, have the network routes available and have MSDTC configured properly. We have a lot of linked servers and this created many failure points. Some of the older linked servers used IP addresses and not DNS names. This meant we had to go in and touch all those linked servers when the servers moved.

Read the article

SQLAuthority News – Meeting SQL Friends – SQLPASS 2011 Event Log

- by pinaldave

One of the biggest reason I go to SQLPASS is that my friends are going there too. There are so many friends with whom I often talk on Facebook and Twitter but I rarely get time to meet them as well talk with them. One thing I am usually sure that many fo them will be for sure attend SQLPASS. This is one event which every SQL Server Enthusiast should attend. Just like everybody I had pleasant time to meet many of my SQL friends. There were so many friends that I met and I did not click photo. There were so many friends who clicked photo in their camera and I do not have them. Here are 1% of the photos which I have. If you are not in the photo, it does not mean I have less respect to our friendship. Please post link to our photo together :) I was very fortunate that I was able to snap a quick photograph with Pinal Dave with Dr. David DeWitt. I stood outside of the hall waiting for Dr. to show up and when he was heading down from convention center I requested him if I can have one photo for my memory lane and very politely he agreed to have one. It indeed made my day! Pinal Dave with Dr. David DeWitt Every single time I met Steve, I make sure I have one photo for my memory. Steve is so kind every single time. If you know SQL and do not know Steve Jones, you do not know SQL (IMHO). Following is the photograph with Michael McLean. More details about this photo in future blog post! Pinal Dave, Michael McLean, and Rick Morelan Arnie always shares his wisdom with me. I still remember when I very first time visited USA, I was standing alone in corner and Arnie walked to me and introduced to every single person he know. Talking to Arnie is always pleasure and inspiring. Arnie Rowland and Pinal Dave I am now published author and have written two books so far. I am fortunate to have Rick Morelan as Co-author of both of my books. He is great guy and very easy to become friends with. I am very much impressed by him and his kindness during book co-authoring. Here is very first of our photograph together at SQLPASS. Rick Morelan and Pinal Dave Diego Nogare and I have been talking for long time on twitter and on various social media channels. I finally got chance to meet my friend from Brazil. It was excellent experience to meet a friend whom one wants to meet for long time and had never got chance earlier. Buck Woody – who does not know Buck. He is funny, kind and most important friends of every one. Buck is so kind that he does not hesitate to approach people even though he is famous and most known in community. Every time I meet him I learn something. He is always smiling and approachable. Pinal Dave and Buck Woddy Rushabh Mehta is current SQL PASS president and personal friend. He has always smiling face and tremendous love for SQL community. I often wonder where he gets all the time for all the time and efforts he puts in for community. I never miss a chance to meet and greet him. Even though he is renowned SQL Guru and extremely busy person – every single time I meet him he always asks me – “How is Nupur and Shaivi?” He even remembers my wife and daughters name. I am touched. Rushabh Mehta and Pinal Dave Nigel Sammy has extremely well sense of humor and passion from community. We have excellent synergy while we are together. The attached photo is taken while I was talking to him on Seattle Shoreline about SQL. Pinal Dave and Nigel Sammy Rick Morelan wanted my this trip to be memorable. I am vegetarian and I told him that I do not like Seafood. Well, to prove the point, he took me to fantastic Seafood restaurant in Seattle and treated me with mouth watering vegetarian dishes. I think when I go to Seattle next time, I am going to make him to take me again to the same place. Rick, Rushabh, Pinal and Paras Well, this is a short summary of few of the friends I met at Seattle. What is the life without friends, eh? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

Read the article

Logical Domain Modeling Made Simple

- by Knut Vatsendvik

How can logical domain modeling be made simple and collaborative? Many non-technical end-users, managers and business domain experts find it difficult to understand the visual models offered by many UML tools. This creates trouble in capturing and verifying the information that goes into a logical domain model. The tools are also too advanced and complex for a non-technical user to learn and use. We have therefore, in our current project, ended up with using Confluence as tool for designing the logical domain model with the help of a few very useful plugins. Big thanks to Ole Nymoen and Per Spilling for their expertise in this field that made this posting possible. Confluence Plugins Here is a list of Confluence plugins used in this solution. Install these before trying out the macros used below. Plugin Description Copy Space Allows a space administrator to copy a space, including the pages within the space Metadata Supports adding metadata to Wiki pages Label Manages labeling of pages Linking Contains macros for linking to templates, the dashboard and other Table Enhances the table capability in Confluence Creating a Confluence Space First we need to create a new confluence space for the domain model. Click the link Create a Space located below the list of spaces on the Dashboard. Please contact your Confluence administrator is you do not have permissions to do this. For illustrative purpose all attributes and entities in this posting are based on my imaginary project manager domain model. When a logical domain model is good enough for being implemented, do a copy of the Confluence Space (see Copy Space plugin). In this way you create a stable version of the logical domain model while further design can continue with the new copied space. Typical will the implementation phase result in a database design and/or a XSD schema design. Add Space Templates Go to the Home page of your Confluence Space. Navigate to the Browse drop-down menu and click on Advanced. Then click the Templates option in the left navigation panel. Click Add New Space Template to add the following three templates. Name: attribute {metadata-list} || Name | | || Type | | || Format | | || Description | | {metadata-list} {add-label:attribute} Name: primary-type {metadata-list} || Name | || || Type | || || Format | || || Description | || {metadata-list} {add-label:primary-type} Name: complex-type {metadata-list} || Name | || || Description | || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | {add-label:complex-type,entity} The metadata-list macro (see Metadata plugin) will save a list of metadata values to the page. The add-label macro (see Label plugin) will automatically label the page. Primary Types Page Our first page to add will act as container for our primary types. Switch to Wiki markup when adding the following content to the page. | (+) {add-page:template=primary-type|parent=@self}Add new primary type{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|root=@self|pages=@descendents} Once the page is created, click the Add new primary type (create-page macro) to start creating a new pages. Here is an example of input to the LocalDate page. Embrace the LocalDate with square brackets [] to make the page linkable. Again switch to Wiki markup before editing. {metadata-list} || Name | [LocalDate] || || Type | Date || || Format | YYYY-MM-DD || || Description | Date in local time zone. YYYY = year, MM = month and DD = day || {metadata-list} {add-label:primary-type} The metadata-report macro will show a tabular report of all child pages. Attributes Page The next page will act as container for all of our attributes. | (+) {add-page:template=attribute|parent=@self|title=attribute}Add new attribute{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|pages=@descendants} Here is an example of input to the startDate page. {metadata-list} || Name | [startDate] || || Type | [LocalDate] || || Format | {metadata-from:LocalDate|Format} || || Description | The projects start date || {metadata-list} {add-label:attribute} Using the metadata-from macro we fetch the text from the previously created LocalDate page. Complex Types Page The last page in this example shows how attributes can be combined together to form more complex types. h3. Intro Overview of complex types in the domain model. | (+) {add-page:template=complex-type|parent=@self}Add a new complex type{add-page}\\ | {metadata-report:Name,Description|sort=Name|root=@self|pages=@descendents} Here is an example of input to the ProjectType page. {metadata-list} || Name | [ProjectType] || || Description | Represents a project || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [projectId] | {metadata-from:projectId|Type} | {metadata-from:projectId|Format} | {metadata-from:projectId|Description} | | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | | [description] | {metadata-from:description|Type} | {metadata-from:description|Format} | {metadata-from:description|Description} | | [startDate] | {metadata-from:startDate|Type} | {metadata-from:startDate|Format} | {metadata-from:startDate|Description} | {add-label:complex-type,entity} Gives us this Conclusion Using a web-based corporate Wiki like Confluence to create a logical domain model increases the collaboration between people with different roles in the enterprise. It’s my believe that this helps the domain model to be more accurate, and better documented. In our real project we have more pages than illustrated here to complete the documentation. We do also still use UML tools to create different types of diagrams that Confluence do not support. As a last tip, an ImageMap plugin can make those diagrams clickable when used in pages. Enjoy!

Read the article

SQL SERVER – SSMS: Backup and Restore Events Report

- by Pinal Dave

A DBA wears multiple hats and in fact does more than what an eye can see. One of the core task of a DBA is to take backups. This looks so trivial that most developers shrug this off as the only activity a DBA might be doing. I have huge respect for DBA’s all around the world because even if they seem cool with all the scripting, automation, maintenance works round the clock to keep the business working almost 365 days 24×7, their worth is knowing that one day when the systems / HDD crashes and you have an important delivery to make. So these backup tasks / maintenance jobs that have been done come handy and are no more trivial as they might seem to be as considered by many. So the important question like: “When was the last backup taken?”, “How much time did the last backup take?”, “What type of backup was taken last?” etc are tricky questions and this report lands answers to the same in a jiffy. So the SSMS report, we are talking can be used to find backups and restore operation done for the selected database. Whenever we perform any backup or restore operation, the information is stored in the msdb database. This report can utilize that information and provide information about the size, time taken and also the file location for those operations. Here is how this report can be launched. Once we launch this report, we can see 4 major sections shown as listed below. Average Time Taken For Backup Operations Successful Backup Operations Backup Operation Errors Successful Restore Operations Let us look at each section next. Average Time Taken For Backup Operations Information shown in “Average Time Taken For Backup Operations” section is taken from a backupset table in the msdb database. Here is the query and the expanded version of that particular section USE msdb; SELECT (ROW_NUMBER() OVER (ORDER BY t1.TYPE))%2 AS l1 , 1 AS l2 , 1 AS l3 , t1.TYPE AS [type] , (AVG(DATEDIFF(ss,backup_start_date, backup_finish_date)))/60.0 AS AverageBackupDuration FROM backupset t1 INNER JOIN sys.databases t3 ON ( t1.database_name = t3.name) WHERE t3.name = N'AdventureWorks2014' GROUP BY t1.TYPE ORDER BY t1.TYPE On my small database the time taken for differential backup was less than a minute, hence the value of zero is displayed. This is an important piece of backup operation which might help you in planning maintenance windows. Successful Backup Operations Here is the expanded version of this section. This information is derived from various backup tracking tables from msdb database. Here is the simplified version of the query which can be used separately as well. SELECT * FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name) LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id) WHERE (t1.name = N'AdventureWorks2014') ORDER BY backup_start_date DESC,t3.backup_set_id,t6.physical_device_name; The report does some calculations to show the data in a more readable format. For example, the backup size is shown in KB, MB or GB. I have expanded first row by clicking on (+) on “Device type” column. That has shown me the path of the physical backup file. Personally looking at this section, the Backup Size, Device Type and Backup Name are critical and are worth a note. As mentioned in the previous section, this section also has the Duration embedded inside it. Backup Operation Errors This section of the report gets data from default trace. You might wonder how. One of the event which is tracked by default trace is “ErrorLog”. This means that whatever message is written to errorlog gets written to default trace file as well. Interestingly, whenever there is a backup failure, an error message is written to ERRORLOG and hence default trace. This section takes advantage of that and shows the information. We can read below message under this section, which confirms above logic. No backup operations errors occurred for (AdventureWorks2014) database in the recent past or default trace is not enabled. Successful Restore Operations This section may not be very useful in production server (do you perform a restore of database?) but might be useful in the development and log shipping secondary environment, where we might be interested to see restore operations for a particular database. Here is the expanded version of the section. To fill this section of the report, I have restored the same backups which were taken to populate earlier sections. Here is the simplified version of the query used to populate this output. USE msdb; SELECT * FROM restorehistory t1 LEFT OUTER JOIN restorefile t2 ON ( t1.restore_history_id = t2.restore_history_id) LEFT OUTER JOIN backupset t3 ON ( t1.backup_set_id = t3.backup_set_id) WHERE t1.destination_database_name = N'AdventureWorks2014' ORDER BY restore_date DESC, t1.restore_history_id,t2.destination_phys_name Have you ever looked at the backup strategy of your key databases? Are they in sync and do we have scope for improvements? Then this is the report to analyze after a week or month of maintenance plans running in your database. Do chime in with what are the strategies you are using in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

Read the article

Microsoft, jQuery, and Templating

- by Stephen Walther

About two months ago, John Resig and I met at Café Algiers in Harvard square to discuss how Microsoft can contribute to the jQuery project. Today, Scott Guthrie announced in his second-day MIX keynote that Microsoft is throwing its weight behind jQuery and making it the primary way to develop client-side Ajax applications using Microsoft technologies. What does this announcement mean? It means that Microsoft is shifting its resources to invest in jQuery. Developers on the ASP.NET team are now working full-time to contribute features to the core jQuery library. Furthermore, we are working with other teams at Microsoft to ensure that our technologies work great with jQuery. We are contributing to the open-source jQuery project in the exact same way that any other company or individual from the community can contribute to jQuery. We are writing proposals, submitting the proposals to the jQuery forums, and revising the proposals in response to community feedback. The jQuery team can decide to reject or accept any feature that we propose. Any feature that Microsoft contributes to jQuery will be platform neutral. In other words, Microsoft contributions will benefit PHP and RAILS developers just as much as they benefit ASP.NET developers. Microsoft contributions to jQuery will improve the web for everyone. Contributing Support for Templates to jQuery Core Our first proposal concerns templating. We want to contribute support for templates to jQuery so that JavaScript developers can use jQuery to easily display a set of database records. You can read our templating proposal here: http://wiki.github.com/nje/jquery/jquery-templates-proposal You can download and play with our prototype for templating here: http://github.com/nje/jquery-tmpl The following code illustrates how you can use a template to display a set of products in a bulleted list: <script type="text/javascript"> jQuery(function(){ var products = [ { name: "Product 1", price: 12.99}, { name: "Product 2", price: 9.99}, { name: "Product 3", price: 35.59} ]; $("ul").append("#template", products); }); </script> <script id="template" type="text/html"> <li>{%= name %} - {%= price %}</li> </script> <ul></ul> The template is contained in a SCRIPT element that has a TYPE=”text/html” attribute. Browsers ignore the contents of a SCRIPT element when they don’t understand the content type. Notice that the placeholder {%=...%} is used within the template to indicate where the name and price of a product should appear. The delimiters {%=…%} are used for expressions and the delimiters {%...%} are used for code. Finally, the products are rendered using the template with the call to $(“ul”).append(“#template”, products). The standard jQuery DOM manipulation methods have been modified to support templates. When the page above is rendered, you get the bulleted list displayed in the following figure. Our goal is to keep our proposal for templates as simple as possible. After support for templating has been added to jQuery, plug-in authors can take advantage of templating when building complex data-driven plug-ins such as a DataGrid plug-in. The Ajax Control Toolkit Over 100,000 developers download the Ajax Control Toolkit every month. That’s a mind-boggling number of downloads. We realize that the Ajax Control Toolkit is extremely popular among ASP.NET Web Forms developers and we want to continue to invest in the Ajax Control Toolkit. If you are adding JavaScript interactivity to an ASP.NET Web Forms application, and you don’t want to write JavaScript, then we recommend that you use the server controls in the Ajax Control Toolkit. Using the Ajax Control Toolkit does not require knowledge of JavaScript and the toolkit enables you to build applications with the concepts familiar to ASP.NET Web Forms applications developers. If, however, you are interested in creating client-side interactivity without server controls then we recommend that you use jQuery. We plan to continue to release new versions of the Ajax Control Toolkit every few months. Our goal is to continue to improve the quality of the Ajax Control Toolkit and to make it easier for the community to contribute code, bug fixes, and documentation. The ASP.NET Ajax Library We are moving the ASP.NET Ajax Library into the Ajax Control Toolkit. If you currently use ASP.NET Ajax Library client templates, client data-binding, or the client script loader then you can continue to use these features by downloading the Ajax Control Toolkit. Be aware that our focus with the Ajax Control Toolkit is server-side Ajax. For client-side Ajax, we are shifting our focus to jQuery. For example, if you have been using ASP.NET Ajax Library client templates then we recommend that you shift to using jQuery instead. Conclusion Our plan is to focus on jQuery as the primary technology for building client-side Ajax applications moving forward. We want to adapt Microsoft technologies to work great with jQuery and we want to contribute features to jQuery that will make the web better for everyone. We are very excited to be working with the jQuery core team.

Read the article

New .NET Library for Accessing the Survey Monkey API

- by Ben Emmett

I’ve used Survey Monkey’s API for a while, and though it’s pretty powerful, there’s a lot of boilerplate each time it’s used in a new project, and the json it returns needs a bunch of processing to be able to use the raw information. So I’ve finally got around to releasing a .NET library you can use to consume the API more easily. The main advantages are: Only ever deal with strongly-typed .NET objects, making everything much more robust and a lot faster to get going Automatically handles things like rate-limiting and paging through results Uses combinations of endpoints to get all relevant data for you, and processes raw response data to map responses to questions To start, either install it using NuGet with PM> Install-Package SurveyMonkeyApi (easier option), or grab the source from https://github.com/bcemmett/SurveyMonkeyApi if you prefer to build it yourself. You’ll also need to have signed up for a developer account with Survey Monkey, and have both your API key and an OAuth token. A simple usage would be something like: string apiKey = "KEY"; string token = "TOKEN"; var sm = new SurveyMonkeyApi(apiKey, token); List<Survey> surveys = sm.GetSurveyList(); The surveys object is now a list of surveys with all the information available from the /surveys/get_survey_list API endpoint, including the title, id, date it was created and last modified, language, number of questions / responses, and relevant urls. If there are more than 1000 surveys in your account, the library pages through the results for you, making multiple requests to get a complete list of surveys. All the filtering available in the API can be controlled using .NET objects. For example you might only want surveys created in the last year and containing “pineapple” in the title: var settings = new GetSurveyListSettings { Title = "pineapple", StartDate = DateTime.Now.AddYears(-1) }; List<Survey> surveys = sm.GetSurveyList(settings); By default, whenever optional fields can be requested with a response, they will all be fetched for you. You can change this behaviour if for some reason you explicitly don’t want the information, using var settings = new GetSurveyListSettings { OptionalData = new GetSurveyListSettingsOptionalData { DateCreated = false, AnalysisUrl = false } }; Survey Monkey’s 7 read-only endpoints are supported, and the other 4 which make modifications to data might be supported in the future. The endpoints are: Endpoint Method Object returned /surveys/get_survey_list GetSurveyList() List<Survey> /surveys/get_survey_details GetSurveyDetails() Survey /surveys/get_collector_list GetCollectorList() List<Collector> /surveys/get_respondent_list GetRespondentList() List<Respondent> /surveys/get_responses GetResponses() List<Response> /surveys/get_response_counts GetResponseCounts() Collector /user/get_user_details GetUserDetails() UserDetails /batch/create_flow Not supported Not supported /batch/send_flow Not supported Not supported /templates/get_template_list Not supported Not supported /collectors/create_collector Not supported Not supported The hierarchy of objects the library can return is Survey List<Page> List<Question> QuestionType List<Answer> List<Item> List<Collector> List<Response> Respondent List<ResponseQuestion> List<ResponseAnswer> Each of these classes has properties which map directly to the names of properties returned by the API itself (though using PascalCasing which is more natural for .NET, rather than the snake_casing used by SurveyMonkey). For most users, Survey Monkey imposes a rate limit of 2 requests per second, so by default the library leaves at least 500ms between requests. You can request higher limits from them, so if you want to change the delay between requests just use a different constructor: var sm = new SurveyMonkeyApi(apiKey, token, 200); //200ms delay = 5 reqs per sec There’s a separate cap of 1000 requests per day for each API key, which the library doesn’t currently enforce, so if you think you’ll be in danger of exceeding that you’ll need to handle it yourself for now. To help, you can see how many requests the current instance of the SurveyMonkeyApi object has made by reading its RequestsMade property. If the library encounters any errors, including communicating with the API, it will throw a SurveyMonkeyException, so be sure to handle that sensibly any time you use it to make calls. Finally, if you have a survey (or list of surveys) obtained using GetSurveyList(), the library can automatically fill in all available information using sm.FillMissingSurveyInformation(surveys); For each survey in the list, it uses the other endpoints to fill in the missing information about the survey’s question structure, respondents, and responses. This results in at least 5 API calls being made per survey, so be careful before passing it a large list. It also joins up the raw response information to the survey’s question structure, so that for each question in a respondent’s set of replies, you can access a ProcessedAnswer object. For example, a response to a dropdown question (from the /surveys/get_responses endpoint) might be represented in json as { "answers": [ { "row": "9384627365", } ], "question_id": "615487516" } Separately, the question’s structure (from the /surveys/get_survey_details endpoint) might have several possible answers, one of which might look like { "text": "Fourth item in dropdown list", "visible": true, "position": 4, "type": "row", "answer_id": "9384627365" } The library understands how this mapping works, and uses that to give you the following ProcessedAnswer object, which first describes the family and type of question, and secondly gives you the respondent’s answers as they relate to the question. Survey Monkey has many different question types, with 11 distinct data structures, each of which are supported by the library. If you have suggestions or spot any bugs, let me know in the comments, or even better submit a pull request .

Read the article

Testing Mobile Websites with Adobe Shadow

- by dwahlin

It’s no surprise that mobile development is all the rage these days. With all of the new mobile devices being released nearly every day the ability for developers to deliver mobile solutions is more important than ever. Nearly every developer or company I’ve talked to recently about mobile development in training classes, at conferences, and on consulting projects says that they need to find a solution to get existing websites into the mobile space. Although there are several different frameworks out there that can be used such as jQuery Mobile, Sencha Touch, jQTouch, and others, how do you test how your site renders on iOS, Android, Blackberry, Windows Phone, and the variety of mobile form factors out there? Although there are different virtual solutions that can be used including Electric Plum for iOS, emulators, browser plugins for resizing the laptop/desktop browser, and more, at some point you need to test on as many physical devices as possible. This can be extremely challenging and quite time consuming though especially when you consider that you have to manually enter URLs into devices and click links on each one to drill-down into sites. Adobe Labs just released a product called Adobe Shadow (thanks to Kurt Sprinzl for letting me know about it) that significantly simplifies testing sites on physical devices, debugging problems you find, and even making live modifications to HTML and CSS content while viewing a site on the device to see how rendering changes. You can view a page in your laptop/desktop browser and have it automatically pushed to all of your devices without actually touching the device (a huge time saver). See a problem with a device? Locate it using the free Chrome extension, pull up inspection tools (based on the Chrome Developer tools) and make live changes through Chrome that appear on the respective device so that it’s easy to identify how problems can be resolved. I’ve been using Adobe Shadow and am very impressed with the amount of time saved and the different features that it offers. In the rest of the post I’ll walk through how to get it installed, get it started, and use it to view and debug pages. Getting Adobe Shadow Installed The following steps can be used to get Adobe Shadow installed: 1. Download and install Adobe Shadow on your laptop/desktop 2. Install the Adobe Shadow extension for Chrome 3. Install the Adobe Shadow app on all of your devices (you can find it in various app stores) 4. Connect your devices to Wifi. Make sure they’re on the same network that your laptop/desktop machine is on Getting Adobe Shadow Started Once Adobe Shadow is installed, you’ll need to get it running on your laptop/desktop and on all your mobile devices. The following steps walk through that process: 1. Start the Adobe Shadow application on your laptop/desktop 2. Start the Adobe Shadow app on each of your mobile devices 3. Locate the laptop/desktop name in the list that’s shown on each mobile device: 4. Select the laptop/desktop name and a passcode will be shown: 5. Open the Adobe Shadow Chrome extension on the laptop/desktop and enter the passcode for the given device: Using Adobe Shadow to View and Modify Pages Once Adobe Shadow is up and running on your laptop/desktop and on all of your mobile devices you can navigate to a page in Chrome on the laptop/desktop and it will automatically be pushed out to all connected mobile devices. If you have 5 mobile devices setup they’ll all navigate to the page displayed in Chrome (pretty awesome!). This makes it super easy to see how a given page looks on your iPad, Android device, etc. without having to touch the device itself. If you find a problem with a page on a device you can select the device in the Chrome Adobe Shadow extension on your laptop/desktop and select the remote inspector icon (it’s the < > icon): This will pull up the Adobe Shadow remote debugging window which contains the standard Chrome Developer tool tabs such as Elements, Resources, Network, etc. Click on the Elements tab to see the HTML rendered for the target device and then drill into the respective HTML content, CSS styles, etc. As HTML elements are selected in the Adobe Shadow debugging tool they’ll be highlighted on the device itself just like they would if you were debugging a page directly in Chrome with the developer tools. Here’s an example from my Android device that shows how the page looks on the device as I select different HTML elements on the laptop/desktop: Conclusion I’m really impressed with what I’ve to this point from Adobe Shadow. Controlling pages that display on devices directly from my laptop/desktop is a big time saver and the ability to remotely see changes made through the Chrome Developer Tools (on my laptop/desktop) really pushes the tool over the top. If you’re developing mobile applications it’s definitely something to check out. It’s currently free to download and use. For additional details check out the video below:

Read the article

ASP.NET, HTTP 404 and SEO

- by paxer

The other day our SEO Manager told me that he is not happy about the way ASP.NET application return HTTP response codes for Page Not Found (404) situation. I've started research and found interesting things, which could probably help others in similar situation. 1) By default ASP.NET application handle 404 error by using next web.config settings <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.html"/> </customErrors> However this approach has a problem, and this is actually what our SEO manager was talking about. This is what HTTP return to request in case of Page not Found situation. So first of all it return HTTP 302 Redirect code and then HTTP 200 - ok code. The problem : We need to have HTTP 404 response code at the end of response for SEO purposes. Solution 1 Let's change a bit our web.config settings to handle 404 error not on static html page but on .aspx page <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.aspx"/> </customErrors> And now let's add in Page_Load event on 404.aspx page next lines protected void Page_Load(object sender, EventArgs e) { Response.StatusCode = 404; } Now let's run our test again Now it has got better, last HTTP response code is 404, but my SEO manager still was not happy, becouse we still have 302 code before it, and as he said this is bad for Google search optimization. So we need to have only 404 HTTP code alone. Solution 2 Let's comment our web.config settings  Now, let's open our Global.asax file, or if it does not exist in your project - add it. Then we need to add next logic which will detect if server error code is 404 (Page not found) then handle it. protected void Application_Error(object sender, EventArgs e) { Exception ex = Server.GetLastError(); if (ex is HttpException) { if (((HttpException)(ex)).GetHttpCode() == 404) Server.Transfer("~/404.html"); } // Code that runs when an unhandled error occurs Server.Transfer("~/GenericError.htm"); } Cool, now let's start our test again... Yehaa, looks like now we have only 404 HTTP response code, SEO manager and Google are happy and so do i:) Hope this helps!

Read the article

On Contract Employment

- by kerry

I am going to post about something I don’t post about a lot, the business side of development. Scott at the antipimp does a good job of explaining how contracts work from a business perspective. I am going to give a view from the ground. First, a little background on myself. I have recently taken a 6 month contract after about 8 years of fulltime employment. I have 2 kids, and a stay at home wife. I took this contract opportunity because I wanted to try it on for size. I have always wondered whether I would like doing contracts over fulltime employment. So, in keeping with the theme of this blog I will write this down now so that I may reference it later. ALL jobs are temporary! Right now you may not realize it, most people simply ignore it, but EVERY job is temporary. Everyone should be planning for life after the money stops coming in. Sadly, most people do not. Contracting pushes this issue to the forefront, making you deal with it. After a month on a contract, I am happy to say that I am saving more than I ever saved in a fulltime position. Hopefully, I will be ready in case of an extended window of unemployment between contracts. Networking I find it extremely gratifying getting to know people. It is especially beneficial when moving to a new city. What better way to go out and meet people in your field than to work a few contracts? 6 months of working beside someone and you get to know them pretty well. This is one of my favorite aspects. Technical Agility Moving between IS shops takes (or molds you into) a flexible person. You have to be able to go in and hit the ground running. This means you need to be able to sit down and start work on a large codebase working in a language that you may or may not have that much experience in. It is also an excellent way to learn new languages and broaden your technical skill set. I took my current position to learn Ruby. A month ago, I had only used it in passing, but now I am using it every day. It’s a tragedy in this field when people start coding for the joy and love of coding, then become deeply entrenched in their companies methods and technologies that it becomes a just a job. Less Stress I am not talking about the kind of stress you get from a jackass boss. I am talking about the kind of stress I (or others) experience about planning and future proofing your code. Not saying I stay up at night worrying whether we have done it right, if that code I wrote today is going to bite me later, but it still creeps around in the dark recesses of my mind. Careful though, I am not suggesting you write sloppy code; just defer any large architectural or design decisions to the ‘code owners’. Flexible Scheduling It makes me very happy to be able to cut out a few hours early on a Friday (provided the work is done) and start the weekend off early by going to the pool, or taking the kids to the park. Contracting provides you this opportunity (mileage may vary). Most of your fulltime brethren will not care, they will be jealous that they’re corporate policy prevents them from doing the same. However, you must be mindful of situations where this is not appropriate, and don’t over do it. You are there to work after all. Affirmation of Need Have you ever been stuck in a job where you thought you were underpaid? Have you ever been in a position where you felt like there was not enough workload for you? This is not a problem for contractors. When you start a contract it is understood that you are needed, and the employer knows that you are happy with the terms. Contracting may not be for everyone. But, if you develop a relationship with a good consulting firm, keep their clients happy, then they will keep you happy. They want you to work almost as much as you do. Just be sure and plan financially for any windows of unemployment.

Read the article

Internet Explorer and Cookie Domains

- by Rick Strahl

I've been bitten by some nasty issues today in regards to using a domain cookie as part of my FormsAuthentication operations. In the app I'm currently working on we need to have single sign-on that spans multiple sub-domains (www.domain.com, store.domain.com, mail.domain.com etc.). That's what a domain cookie is meant for - when you set the cookie with a Domain value of the base domain the cookie stays valid for all sub-domains. I've been testing the app for quite a while and everything is working great. Finally I get around to checking the app with Internet Explorer and I start discovering some problems - specifically on my local machine using localhost. It appears that Internet Explorer (all versions) doesn't allow you to specify a domain of localhost, a local IP address or machine name. When you do, Internet Explorer simply ignores the cookie. In my last post I talked about some generic code I created to basically parse out the base domain from the current URL so a domain cookie would automatically used using this code:private void IssueAuthTicket(UserState userState, bool rememberMe) { FormsAuthenticationTicket ticket = new FormsAuthenticationTicket(1, userState.UserId, DateTime.Now, DateTime.Now.AddDays(10), rememberMe, userState.ToString()); string ticketString = FormsAuthentication.Encrypt(ticket); HttpCookie cookie = new HttpCookie(FormsAuthentication.FormsCookieName, ticketString); cookie.HttpOnly = true; if (rememberMe) cookie.Expires = DateTime.Now.AddDays(10); var domain = Request.Url.GetBaseDomain(); if (domain != Request.Url.DnsSafeHost) cookie.Domain = domain; HttpContext.Response.Cookies.Add(cookie); } This code works fine on all browsers but Internet Explorer both locally and on full domains. And it also works fine for Internet Explorer with actual 'real' domains. However, this code fails silently for IE when the domain is localhost or any other local address. In that case Internet Explorer simply refuses to accept the cookie and fails to log in. Argh! The end result is that the solution above trying to automatically parse the base domain won't work as local addresses end up failing. Configuration Setting Given this screwed up state of affairs, the best solution to handle this is a configuration setting. Forms Authentication actually has a domain key that can be set for FormsAuthentication so that's natural choice for the storing the domain name: <authentication mode="Forms"> <forms loginUrl="~/Account/Login" name="gnc" domain="mydomain.com" slidingExpiration="true" timeout="30" xdt:Transform="Replace"/> </authentication> Although I'm not actually letting FormsAuth set my cookie directly I can still access the domain name from the static FormsAuthentication.CookieDomain property, by changing the domain assignment code to:if (!string.IsNullOrEmpty(FormsAuthentication.CookieDomain)) cookie.Domain = FormsAuthentication.CookieDomain; The key is to only set the domain when actually running on a full authority, and leaving the domain key blank on the local machine to avoid the local address debacle. Note if you want to see this fail with IE, set the domain to domain="localhost" and watch in Fiddler what happens. Logging Out When specifying a domain key for a login it's also vitally important that that same domain key is used when logging out. Forms Authentication will do this automatically for you when the domain is set and you use FormsAuthentication.SignOut(). If you use an explicit Cookie to manage your logins or other persistant value, make sure that when you log out you also specify the domain. IOW, the expiring cookie you set for a 'logout' should match the same settings - name, path, domain - as the cookie you used to set the value.HttpCookie cookie = new HttpCookie("gne", ""); cookie.Expires = DateTime.Now.AddDays(-5); // make sure we use the same logic to release cookie var domain = Request.Url.GetBaseDomain(); if (domain != Request.Url.DnsSafeHost) cookie.Domain = domain; HttpContext.Response.Cookies.Add(cookie); I managed to get my code to do what I needed it to, but man I'm getting so sick and tired of fixing IE only bugs. I spent most of the day today fixing a number of small IE layout bugs along with this issue which took a bit of time to trace down.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

SQLAuthority News – A Real Story of Book Getting ‘Out of Stock’ to A 25% Discount Story Available

- by pinaldave

As many of my readers may know, I have recently written a few books. Right now I’d like to talk about SQL Server Interview Questions and Answers (http://bit.ly/sqlinterviewbook ), my newest release. What inspired me to write this book was similar to my motivations for my previous titles – I wanted to help people understand SQL Server concepts and ace interview questions so that they could get a great job they love, as much as I love my own job. If you are new to SQL Server, don’t think I left you out of my book writing efforts. If you are new to the subject or have not had to deal with SQL Server in a long time, this book is perfect for someone who wants or needs a last minute refresher. If you are facing an upcoming interview and want to impress your future bosses, this book is perfect for getting you up to speed in a short time. However, if you are already an expert, you will still find a lot to learn and many pointers and suggestions that go deep into the subject. As I said before, I wrote this book in order to help my community, and I certainly hoped that this book would become popular. However, we decided to print a very limited number of copies to begin with. We did not think that it would sell out since much of the information is available for free online. We could not have been more wrong! We incorrectly estimated what people wanted. We did not realize that there is still a need and an interest for structured learning. So, with great reservations, we printed quite a large number of copies – and it still ran out in 36 hours! We got call from the online store with a request for more copies within 12 hours. But we had printed only as many as we had sent them. There were no extra copies. We finally talked to the printer to get more copies. However, due to festivals and holidays the copies could not be shipped to the online retailer for two days. We knew for sure that they were going to be out of the book for 48 hours. 48 hours – this was very difficult as the book was very highly anticipated. Many people wanted to buy this book quickly, and receive it soon in order to meet a deadline or to study for an upcoming test of their knowledge. But now this book was out of stock on the retail store. The way the online store works is that if the Indian-priced book is not there they list the US version of the book so that buyers will not be disappointed. The problem was that the US price of the book is three times more than the Indian price – which means one has to pay three times as much to buy this book instead of the previous very low price. We received a lot of communication on this subject, here are some examples: We are now businessmen and only focusing on money Why has the price tripled in 36 hours Why we are not honest with the price If the prices will ever come down And some of the letters we cannot post here! Well, finally after 48 hours the Indian stock was finally available online. Thanks to our printer who worked day and night to get all the copies printed. He divided the complete stock in two parts. The first part they sent immediately to online retailer and the second part they kept with them to sell. Finally, the online retailer got them online promptly as well, and the price returned to normal. Our book once again got in business and became the eighth most popular new release in 36 hours. We appreciate your love and support. Without all of your interest and love we would have never come this far and the book would not be so successful. After thinking about all your support and how patient you were with our online troubles, the online retailer has decided to give an extra 25% discount for a limited time only. I think the 48 hours when the book was out of stock were very horrible and stressful and I’d like to apologize to my loyal readers for the mishap. I hope that the 25% off is enough to sooth any remaining hurt feelings, and that everyone will continue to learn and discover things in the book. Once again thank you so much and I truly hope that you all enjoy reading the book as much as I enjoyed writing it. My book SQL Server Interview Questions and Answers is available now. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology

Read the article

Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

- by Lewis Benge

One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

Read the article

Good ol fashioned debugging

- by Tim Dexter

I have been helping out one of our new customers over the last day or two and I have even managed to get to the bottom of their problem FTW! They use BIEE and BIP and wanted to mount a BIP report in a dashboard page, so far so good, BIP does that! Just follow the instructions in the BIEE user guide. The wrinkle is that they want to enter some fixed instruction strings into the dashboard prompts to help the user. These are added as fixed values to the prompt as the default values so they appear first. Once the user makes a selection, the default strings disappear. Its a fair requirement but the BIP report chokes Now, the BIP report had been setup with the Autorun checkbox, unchecked. I expected the BIP report to wait for the Go button to be hit but it was trying to run immediately and failing. That was the first issue. You can not stop the BIP report from trying to run in a dashboard. Even if the Autorun is turned off, it seems that dashboard still makes the request to BIP to run the report. Rather than BIP refusing because its waiting for input it goes ahead anyway, I guess the mechanism does not check the autorun flag when the request is coming from the dashboard. It appears that between BIEE and BIP, they collectively ignore the autorun flag. A bug? might be, at least an enhancement request. With that in mind, how could we get BIP to not at least not fail? This fact was stumping me on the parameter error, if the autorun flag was being respected then why was BIP complaining about the parameter values it should not even be doing anything until the Go button is clicked. I now knew that the autorun flag was being ignored, it was a simple case of putting BIP into debug mode. I use the OC4J server on my laptop so debug msgs are routed through the dos box used to start the OC4J container. When I changed a value on the dashboard prompt I spotted some debug text rushing by that subsequently disappeared from the log once the operation was complete. Another bug? I needed to catch that text as it went by, using the print screen function with some software to grab multiple screens as the log appeared and then disappeared. The upshot is that when you change the dashboard prompt value, BIP validates the value against its own LOVs, if its not in the list then it throws the error. Because 'Fill this first' and 'Fill this second' ie fixed strings from the dashboard prompts, are not in the LOV lists and because the report is auto running as soon as the dashboard page is brought up, the report complains about invalid parameters. To get around this, I needed to get the strings into the LOVs. Easily done with a UNION clause: select 'Fill this first' from SH.Products Products UNION select Products."Prod Category" as "Prod Category" from SH.Products Products Now when BIP wants to validate the prompt value, the LOV query fires and finds the fixed string -> No Error. No data, but definitely no errors :0) If users do run with the fixed values, you can capture that in the template. If there is no data in the report, either the fixed values were used or the parameters selected resulted in no rows. You can capture this in the template and display something like. 'Either your parameter values resulted in no data or you have not changed the default values' Thats the upside, the downside is that if your users run the report in the BP UI they re going to see the fixed strings. You could alleviate that by having BIP display the fixed strings in top of its parameter drop boxes (just set them as the default value for the parameter.) But they will not disappear like they do in the dashboard prompts, see below. If the expected autorun behaviour worked ie wait for the Go button, then we would not have to workaround it but for now, its a pretty good solution. It was an enjoyable hour or so for me, took me back to my developer daze, when we used to race each other for the most number of bug fixes. I used to run a distant 2nd behind 'Bugmeister Chen Hu' but led the chasing pack by a reasonable distance.

Read the article

SnagIt Live Writer Plug-in Updated

- by Rick Strahl

Ah, I love SnagIt from TechSmith and I use the heck out of it almost every day. So no surprise that I've decided some time ago to integrate SnagIt into a few applications that require screen shots extensively. It's been a while since I've posted an update to my small SnagIt Windows Live Writer plug-in. There have been a few nagging issues that have crept up with recent changes in the way SnagIt handles captures in recent versions and they have been addressed in this update of SnagIt. Personally I love SnagIt and use it extensively mostly for blogging, but also for writing documentation and articles etc. While there are many other (and also free) tools out there to do basic screen captures, SnagIt continues to be the most convenient tool for me with its nice built in capture and effects editor that makes creating professional looking captures childishly simple. And maybe even more importantly: SnagIt has a COM interface that can be automated and makes it super easy to embed into other applications. I've built plugins for SnagIt as well as for one of my company's own tools, Html Help Builder. If you use the Windows Live Writer offline WebLog Editor to write blog posts and have a copy of SnagIt it's probably worth your while to check this out if you haven't already. In case you haven't, this plugin integrates SnagIt with Live Writer so you can easily capture and edit content and embed it into a post. Captures are shown in the SnagIt Preview editor where you can edit the image and apply image markup or effects, before selecting Finish (or Cancel). The final image can then be pasted directly into your Live Writer post. When installed the SnagIt plug-in shows up on the PlugIn list or in the Plug-Ins toolbar shortcut: Once you select the Plug in you get the capture window that allows you to customize the capture process which includes most of the useful SnagIt capture options: Once you're done capturing the image shows up in the SnagIt Image Editor and you can crop, mark up and apply effects. When done you click the Finish button and the image is embedded right into your blog post. Easy - how do you think the images in this blog entry got in here? The beauty of SnagIt is that it's all easily integrated - Capturing, editing and embedding, it only takes a few seconds to do it all especially if you save image effect presets in SnagIt. What's updated The main issue addressed in this update has to do with the plug-in updates the Live Writer window. When a capture starts Live Writer gets minimized to get out of the way to let you pick your capture source. When the capture is complete and the image has been embedded Live Writer is activated once again. Recent versions of SnagIt however had changed the Window positioning of SnagIt so that Live Writer ended up popping up back behind the SnagIt window which was pretty annoying. This update pushes Live Writer back to the top of the window stack using some delaying tactics in the code. There have also been a few small changes to the way the code interacts with the COM object which is more reliable if a capture fails or SnagIt blows up or is locked because it's already in a capture outside of the automation interface. Source Code SnagIt Automation is something I actually use a lot. As mentioned I've integrated this automation into Live Writer as well as my documentation tool Html Help Builder, which I use just about daily. The SnagIt integration has a similar interface in that application and provides similar functionality. It's quite useful to integrate SnagIt into other applications. Because it's quite useful to embed SnagIt into other apps there's source code that you can download and embed into your own applications. The code includes both the dialog class that is automated from Live Writer, as well as the basic capture component that captures images to a disk file. Resources Download the SnagIt Capture Plug-in Installer An MSI installer that you can run that will install the plug-in into Live Writer's PlugIns directory. Source Code to the SnagIt Capture Plug-in Contains the plug-in assembly, as well as the source code to the plug-in and the setup project.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Live Writer WebLog Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Training on Demand Certification Packages for DBAs

- by Antoinette O'Sullivan

The demand for Database Administrators continues to grow.*Almost two-thirds of IT hiring managers indicate that they highly value certifications in validatingIT skills and expertise.** * Job satisfaction and DBA work growth rate: CNN Money's 2011 Best Jobs in America survey.** Survey among nearly 1,700 respondents by CompTIA, the nonprofit trade association for the IT industry, cited in Certification Magazine, Feb. 14 th., 2012. Get Certified with Training on DemandAre you an experienced Database professional eager to achieve certification?Is time your most precious resource?Then try our new Training On Demand Certification Value Package with 20% discount. These all-in-one packages give you everything you need to get certified with success: Why Training On Demand: Expert training from Oracle’s top instructors Sophisticated streaming video recording Available for 90 days, 24 hours a day, 7 days a week White boarding and training labs for hands-on experience Start, stop, pause, jump or rewind sections of the course as needed Oracle University instructor Q&A A full-text search leads to the right video fragment in a matter of seconds. Watch this demo to see how it works. Additional Certification resources: Benefits of Oracle Certification Database Certification Paths Available Database Certification Exams Getting certified has never been easier!For assistance contact your local Oracle University Service Desk. Many organizations deploy both Oracle Database and MySQL side by side to serve different needs, and as a database professional you can find training courses on both topics at Oracle University! Check out the upcoming Oracle Database 11g training courses and MySQL training courses. Even if you're only managing Oracle Databases at this point of time, getting familiar with MySQL Database will broaden your career path with growing job demand. These Value Packages are also available with the following training formats: In-Class, Live Virtual Class and Self Study: MySQL Database Administration Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Database Administrator Certification Value Package View Package View Package View Package View Package MySQL Developer Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Developer Certification Value Package View Package View Package Oracle Database 10g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 10g Administrator Certified Associate Certification Value Package View Package View Package View Package Oracle Database 10g Administrator Certified Professional Certification Value Package View Package View Package View Package Oracle Database 11g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 11g Administrator Certified Associate Certification Value Package View Package View Package View Package View Package Oracle Database 11g Administrator Certified Professional Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 1 View Package Oracle Database 11g Administrator Certified Professional UPGRADE Certification Value Package View Package Oracle Real Application Clusters 11g and Grid Infrastructure Administraton Certified Expert Certification Value Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 2 View Package Exam Prep Seminar Value Package: Oracle RAC 11g and Grid Infrastructure Administration View Package Exam Prep Seminar Value Package: Upgrade Oracle Certified Professional (OCP) to Oracle Database 11g View Package SQL and PL/SQL Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database Sql Expert Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database SQL View Package View our Certification Value Packages Mention this code at the time of booking: E1245 Connect For a full list of MySQL Training courses and events, go to http://oracle.com/education/mysql.

Read the article

ISO Files to USB – The Cheap and Easy Way

- by RonGarlit

(DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

Read the article

Record and Play your WebLogic Console Tasks Like a DVR

- by james.bayer

Automation using WebLogic Scripting Tool Today on the Oracle internal mailing list for WebLogic Server questions someone asked how to automate the configuration of the thread model for WebLogic Server and they were having trouble with the jython scripting syntax. I’ve previously written about this feature called Work Managers and the associated constraints. However, I did not show how to automate the process of configuring this without the console using WebLogic Scripting Tool – the jython scripting automation environment abbreviated as WLST. I’ve written some very basic introductions to WLST before and there is also an Oracle By Example on the subject, but this is a bit more advanced. Fear not because there is a really easy-to-use feature of the WLS console that lets you “Record” user actions just like a DVR. Using these recordings of the web-based console, you can easily create a script even if you are unfamiliar with the WLST syntax and API. I’m a big fan of both DVR’s and automation as can be evidenced with this old Halloween picture taken during simpler times. Obviously the Cast Away and The Big Labowski references show some age. I was a big Tivo fan-boy back in the day and I still think it’s the best DVR. I strongly believe that WebLogic Scripting Tool (WLST) is an absolutely essential tool for automating administration tasks in anything beyond a development environment. Even in development environments you can make a case that it makes sense to start the automation for environments downstream. I promise you that once you start using it for any tasks that you do even semi-regularly, you won’t go back to clicking through the console. It’s simply so much more efficient and less error-prone to run a script. Let’s say you need to create a Work Manager and MaxThreadsConstraint – the easy way to do it is configure it in the WLS console first while capturing the commands with a recording. See the images for the simple steps – click to enlarge. Record Console Configurations to a File Review the Recordings and Make Slight Modifications In order to make the recorded .py file directly callable as a stand-alone script I added calls to the connect() and edit() functions at the beginning and calls to disconnect() and exit() at the end – otherwise the main section of the script was provided by the console recording. Below is the resulting file I saved as d:/temp/wm.py connect('weblogic','welcome1', 't3://localhost:7001') edit() startEdit() cd('/SelfTuning/wl_server') cmo.createMaxThreadsConstraint('MaxThreadsConstraint-0') cd('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setCount(5) cmo.unSet('ConnectionPoolName') cd('/SelfTuning/wl_server') cmo.createWorkManager('WorkManager-0') cd('/SelfTuning/wl_server/WorkManagers/WorkManager-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setMaxThreadsConstraint(getMBean('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0')) cmo.setIgnoreStuckThreads(false) activate() disconnect() exit() Run the Script If you want to test it be sure to delete the Work Manager and MaxThreadConstraint that you had previously created in the console. Do something like the following - set up the environment and tell WLST to execute the script which happens in the first 2 lines, the rest doesn’t require any user input: D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server>java weblogic.WLST d:\temp\wm.py Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'examplesServer' that belongs to domain 'wl_server'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit(). For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: examplesServer Exiting WebLogic Scripting Tool. Now if you go back and look in the console the changes have been made and we now have a compete script. Of course there is a full MBean reference and you can learn the nuances of jython and WLST, but why not the WLS console do most of the work for you! Happy scripting.

Read the article

.NET vs Windows 8

- by Simon Cooper

So, day 1 of DevWeek. Lots and lots of Windows 8 and WinRT, as you would expect. The keynote had some actual content in it, fleshed out some of the details of how your apps linked into the Metro infrastructure, and confirmed that there would indeed be an enterprise version of the app store available for Metro apps.) However, that's, not what I want to focus this post on. What I do want to focus on is this: Windows 8 does not make .NET developers obsolete. Phew! .NET in the New Ecosystem In all the hype around Windows 8 the past few months, a lot of developers have got the impression that .NET has been sidelined in Windows 8; C++ and COM is back in vogue, and HTML5 + JavaScript is the New Way of writing applications. You know .NET? It's yesterday's tech. Enter the 21st Century and write <div>! However, after speaking to people at the conference, and after a couple of talks by Dave Wheeler on the innards of WinRT and how .NET interacts with it, my views on the coming operating system have changed somewhat. To summarize what I've picked up, in no particular order (none of this is official, just my sense of what's been said by various people): Metro apps do not replace desktop apps. That is, Windows 8 fully supports .NET desktop applications written for every other previous version of Windows, and will continue to do so in the forseeable future. There are some apps that simply do not fit into Metro. They do not fit into the touch-based paradigm, and never will. Traditional desktop support is not going away anytime soon. The reason Silverlight has been hidden in all the Metro hype is that Metro is essentially based on Silverlight design principles. Silverlight developers will have a much easier time writing Metro apps than desktop developers, as they would already be used to all the principles of sandboxing and separation introduced with Silverlight. It's desktop developers who are going to have to adapt how they work. .NET + XAML is equal to HTML5 + JS in importance. Although the underlying WinRT system is built on C++ & COM, most application development will be done either using .NET or HTML5. Both systems have their own wrapper around the underlying WinRT infrastructure, hiding the implementation details. The CLR is unchanged; it's still the .NET 4 CLR, running IL in .NET assemblies. The thing that changes between desktop and Metro is the class libraries, which have more in common with the Silverlight libraries than the desktop libraries. In Metro, although all the types look and behave the same to callers, some of the core BCL types are now wrappers around their WinRT equivalents. These wrappers are then enhanced using standard .NET types and code to produce the Metro .NET class libraries. You can't simply port a desktop app into Metro. The underlying file IO, network, timing and database access is either completely different or simply missing. Similarly, although the UI is programmed using XAML, the behaviour of the Metro XAML is different to WPF or Silverlight XAML. Furthermore, the new design principles and touch-based interface for Metro applications demand a completely new UI. You will be able to re-use sections of your app encapsulating pure program logic, but everything else will need to be written from scratch. Microsoft has taken the opportunity to remove a whole raft of types and methods from the Metro framework that are obsolete (non-generic collections) or break the sandbox (synchronous APIs); if you use these, you will have to rewrite to use the alternatives, if they exist at all, to move your apps to Metro. If you want to write public WinRT components in .NET, there are some quite strict rules you have to adhere to. But the compilers know about these rules; you can write them in C# or VB, and the compilers will tell you when you do something that isn't allowed and deal with the translation to WinRT metadata rather than .NET assemblies. It is possible to write a class library that can be used in Metro and desktop applications. However, you need to be very careful not to use types that are available in one but not the other. One can imagine developers writing their own abstraction around file IO and UIs (MVVM anyone?) that can be implemented differently in Metro and desktop, but look the same within your shared library. So, if you're a .NET developer, you have a lot less to worry about. .NET is a viable platform on Metro, and traditional desktop apps are not going away. You don't have to learn HTML5 and JavaScript if you don't want to. Hurray!

Read the article

How to find domain registrar and DNS hosting with good DNSSEC support?

- by rsp

Simplified problem I want to buy a domain and make a website that is fully secured with DNSSEC. Background I've been hearing about the insecurity of DNS for years. I've watched all of the talks by Dan Kaminsky and others from DNS exploits to The future of DNS Security Panel. I knew that using DNS without security is a disaster waiting to happen. I followed the development of the DNSSEC standard. I celebrated the key signing ceremony. Everything was on the right track to finally have a secure DNS system in place. And now more than 2 years later I wanted to just do what everyone said I should do: use DNSSEC for a new domain. So I need a domain registrar and a DNS hosting service that supports DNSSEC. Surprisingly it is not that easy to even find out who does support DNSSEC. It was actually much easier to find info on DNSSEC two years ago when everyone was going to support DNSSEC Real Soon Now but now years passed and I hardly see any progress done. I just hope that I was just looking in the wrong places and someone here will explain all of the doubts. I hope that other people who want to have a secure website will also find this question useful. What is needed registrar and DNS servers with full DNSSEC support for .com domains What is not needed IPv6 support Web hosting anything more What I found out so far Go Daddy offers Premium DNS service for additional $36 per year that lets you "Secure up to 5 domains with DNSSEC". easyDNS has DNSSEC available in Beta across all service levels (you need to enable the "beta" flag in configuration) but it doesn't seem to be production ready and judging from the lack of updates it isn't a feature of highest priority (the last update from March 2011 on the easyDNS blog). Name.com - according to The Register (US domain registrar does IPv6, DNSSEC) it has DNSSEC support since 2010 but right now (October 2012) I couldn't find anything related to DNSSEC on their website. Dynadot that is very often recommended doesn't support DNSSEC Namecheap that is also often recommended doesn't support DNSSEC. The support answer from 2011 suggested that it was being added but in 2012 still no ETA is given to customers. DynDNS was supposed to support DNSSEC, I found a link explaining DNSSEC support but it gives 404 Not Found page and offers a search box - when searching for DNSSEC I get "No results were found for your query." GKG was recommended online for DNSSEC support but it's hard to find any information on the level of DNSSEC support - there is a brief explanation on what is DNSSEC and how to sign Delegation Signer records in their FAQ but no information about the level of actual support can be found. Ask Slashdot: Which Registrars Support DNSSEC? from July 2011 - Answers list Go Daddy, DynDNS, GKG, Name.com as registrars that support DNSSEC but: see above. Related questions How to find web hosting that meets my requirements? What is needed to add DNSSEC to my site? DNS hosting better managed by Domain provider or Hosting provider? Registrar with good security, DNS hosting, and DNSSEC and IPv6 resolvers? In no. 1 no one is ever mentioning DNS at all. In no. 2 answers only mention the .se TLD, there are very few answers and they seem very outdated. In no. 3 one answer says "On projects that demand higher security, I might look for a web host that supports DNSSEC" but no more information is provided. The only relevant answers are in no. 4 where easyDNS is recommended by someone who has never used them personally. Meanwhile, as of October 2012, the support of DNSSEC is described as "in beta" on the easyDNS feature list. Another one recommends SiteGround but searching their site for DNSSEC returns no results. Other answers recommend web hosting providers that don't meet the requirement of DNSSEC support. Also the question mentioned above lists 9 very specific requirements other than only DNSSEC (like eg. HTTP-only login cookies, two-factor authentications, no DNS record limits, DNS statistics of queries/day, audit trails etc.) which might have excluded many possible recommendations if one is only interested in DNSSEC support. Conclusions I thought that by the end of 2012 the support of DNSSEC among domain registrars and DNS providers would be nearly universal. I am shocked that the support seems virtually nonexistent. Is this a result of some serious problems with the DNSSEC adoption? Or is it just not a hot topic and no one bothers anymore? According to the DNSSEC Scoreboard roughly about 0.1% of .com domains support DNSSEC. Could that be caused by the lack of DNSSEC support among registrars and DNS providers, is the information too hard to find or maybe no one cares? There is even no "dnssec" tag here. Questions The information is surprisingly hard to find. That is why I am asking for first-hand experience and personal recommendations. Has anyone here actually set up a website with DNSSEC, from the domain registration to the configuration of DNS servers? Can anyone recommend any of the registrars mentioned above? Can anyone recommend any registrar not mentioned above?

Read the article

Upgrading to Oracle Enterprise Manager 12c Release 2: Top Tips One Must Know

- by AnkurGupta

Recently Oracle announced incremental release of Enterprise Manager 12c called Enterprise Manager 12c Release 2 (EM12c R2) which includes several new exciting features (Press announcement). Right before the official release, we upgraded an internal production site from EM 12c R1 to EM 12c R2 and had an extremely pleasant experience. Let me share few key takeaways as well as few tips from this upgrade exercise. I - Why Should You Upgrade To Enterprise Manager 12c Release 2 While an upgrade is usually recommended primarily to take benefit of the latest features (which is valid for this upgrade as well), I found several other compelling reasons purely from deployment perspective. Standardize your EM deployment: Enterprise Manager comprises of several different components (OMS, agents, plug-ins, etc) and it might be possible that these are at varied patch levels in your environment. For instance, in case of an environment containing Bundle Patch 1 (customer announcement), there is a good chance that you may not have all the components up-to-date. There are two possible reasons. Bundle Patch 1 involved patching different components (OMS, agents, plug-ins) with multiple one-off patches which may not have been applied to all components yet. Bundle Patch 1 for different platforms were not released together. Which means you may not have got the chance to patch all the components on different platforms. Note: BP1 patches are not mandatory to upgrade to EM12c R2 release EM 12c R2 provides an excellent opportunity to standardize your Cloud Control environment (OMS, repository and agents) and plug-ins to latest versions in single shot. All platform releases are made available simultaneously: For the very first time in the history of EM release, all the platforms were released on day one itself, which means you do not need to wait for platform specific binaries for EM OMS or Agent to perform install or upgrades in a heterogeneous environment. Highly refined and automated process – Upgrade process is by far the smoothest and the cleanest as compared to previous releases of Enterprise manager. Following are the ones that stand out. Automatic Plug-in management – Plug-in upgrade along with new plug-in deployment is supported in upgrade installer wizard which means bulk of the updates to OMS and repository can be done in the same workflow. Saves time and minimizes user inputs. Plug-in Upgrade or Migrate Auto Update: While doing the OMS and repository upgrade, you can use Auto Update screen in Oracle Universal Installer to check for any updates/patches. That will help you to avoid the know issues and will make sure that your upgrade is successful. Allows mass upgrade of EM Agents – A new dedicated menu has been added in the EM console for agent upgrade. Agent upgrade workflow is extremely simple that requires agent name as the only input. ADM / JVMD Manager/Agent upgrade – complete process is supported via UI screens. EM12c R2 Upgrade Guide is much simpler to follow as compared to those for earlier releases. This is attributed to the simpler upgrade process. Robust and Performing Platform: EM12c R2 release not only includes several new features, but also provides a more stable platform which incorporates several fixes and enhancements in the Enterprise Manager framework. II - Few Tips To Remember In my last post (blog link) I shared few tips and tricks from my experience applying the Bundle Patch. Recently I upgraded the same site to EM 12c R2 and found few points that you must take note of, while planning this upgrade. The tips below are also applicable to EM 12c R1 environments that do not have Bundle Patch 1 patches applied. Verify the monitored application certification – Specific targets like E-Business Suite have not yet been certified as managed target in EM 12c R2. Therefore make sure to recheck the Enterprise Manager certification Matrix on My Oracle Support before planning the upgrade. Plan downtime – Because EM 12c R2 is an incremental release of EM 12c, for EM 12c R1 to EM 12c R2 upgrade supports only 1-system upgrade approach, which mean there will be downtime. OMS name change after upgrade – In case of multi OMS environments, additional OMS is renamed after upgrade, which has few implications when you upgrade JVMD and ADP agents on OMS. This is well documented in upgrade guide but make sure you read through all the notes. Upgrading BI Publisher– EM12c R2 is certified with BI Publisher 11.1.1.6.0 only. Therefore in case you are using EM 12c R1 which is integrated with BI Publisher 11.1.1.5.0, you must upgrade the BI Publisher to 11.1.1.6.0. Follow the steps from Advanced Installation and Configuration Guide here. Perform Post upgrade Tasks – Make sure to perform post upgrade steps mentioned in documentation here. These include critical changes that must be done right after upgrade to get the right configuration. For instance Database plug-in should be upgraded to Revision 3 (12.1.0.2.0 [u120804]). Delete old OMS Home – EM12c R1 to EM12c R2 is an out of place upgrade, which means it creates a new oracle home for OMS, plug-ins, etc. Therefore please ensure that You have sufficient extra space for new OMS before starting the upgrade process. You clean up the old OMS home after the upgrade process. Steps are available here. DO NOT remove the agent home on OMS host, because agent is upgraded in-place. If you have standby OMS setup then do look into the steps to upgrade the standby OMS from the upgrade guide before going ahead. Read the right documentation – Make sure to follow the Upgrade guide which provides the most comprehensive information on EM12c R2 upgrade process. Additionally you can refer other resources to get familiar with upgrade concepts. Recorded webcast - Oracle Enterprise Manager Cloud Control 12c Release 2 Installation and Upgrade Overview Presentation - Understanding Enterprise Manager 12.1.0.2 Upgrade We are very excited about this latest release and will look forward to hear back any feedback from your upgrade experience!

Read the article

How to Automate your Database Documentation

- by Jonathan Hickford

In my previous post, “Automating Deployments with SQL Compare command line” I looked at how teams can automate the deployment and post deployment validation of SQL Server databases using the command line versions of Red Gate tools. In this post I’m looking at another use for the command line tools, namely using them to generate up-to-date documentation with every database change. There are many reasons why up-to-date documentation is valuable. For example when somebody new has to work on or administer a database for the first time, or when a new database comes into service. Having database documentation reduces the risks of making incorrect decisions when making changes. Documentation is very useful to business intelligence analysts when writing reports, for example in SSRS. There are a couple of great examples talking about why up to date documentation is valuable on this site: Database Documentation – Lands of Trolls: Why and How? and Database Documentation Using SQL Doc. The short answer is that it can save you time and reduce risk when you need that most! SQL Doc is a fast simple tool that automatically generates database documentation. It can create documents in HTML, Word or pdf files. The documentation contains information about object definitions and dependencies, along with any other information you want to associate with each object. The SQL Doc GUI, which is included in Red Gate’s SQL Developer Bundle and SQL Toolbelt, allows you to add additional notes to objects, and customise which objects are shown in the docs. These settings can be saved as a .sqldoc project file. The SQL Doc command line can use this project file to automatically update the documentation every time the database is changed, ensuring that documentation that is always up to date. The simplest way to keep documentation up to date is probably to use a scheduled task to run a script every day. However if you have a source controlled database, or are using a Continuous Integration (CI) server or a build server, it may make more sense to use that instead. If you’re using SQL Source Control or SSDT Database Projects to help version control your database, you can automatically update the documentation after each change is made to the source control repository that contains your database. To get this automation in place, you can use the functionality of a Continuous Integration (CI) server, which can trigger commands to run when a source control repository has changed. A CI server will also capture and save the documentation that is created as an artifact, so you can always find the exact documentation for a specific version of the database. This forms an always up to date data dictionary. If you don’t already have a CI server in place there are several you can use, such as the free open source Jenkins or the free starter editions of TeamCity. I won’t cover setting these up in this article, but there is information about using CI servers for automating database tasks on the Red Gate Database Delivery webpage. You may be interested in Red Gate’s SQL CI utility (part of the SQL Automation Pack) which is an easy way to update a database with the latest changes from source control. The PowerShell example below shows how to create the documentation from a database. That database might be your integration database or a shared development database that is always up to date with the latest changes. $serverName = "server\instance" $databaseName = "databaseName" # If you want to document multiple databases use a comma separated list $userName = "username" $password = "password" # Path to SQLDoc.exe $SQLDocPath = "C:\Program Files (x86)\Red Gate\SQL Doc 3\SQLDoc.exe" $arguments = @( "/server:$($serverName)", "/database:$($databaseName)", "/username:$($userName)", "/password:$($password)", "/filetype:html", "/outputfolder:.", # "/project:$args[0]", # If you already have a .sqldoc project file you can pass it as an argument to this script. Values in the project will be overridden with any options set on the command line "/name:$databaseName Report", "/copyrightauthor:$([Environment]::UserName)" ) write-host $arguments & $SQLDocPath $arguments There are several options you can set on the command line to vary how your documentation is created. For example, you can document multiple databases or exclude certain types of objects. In the example above, we set the name of the report to match the database name, and use the current Windows user as the documentation author. For more examples of how you can customise the report from the command line please see the SQL Doc command line documentation If you already have a .sqldoc project file, or wish to further customise the report by including or excluding specific objects, you can use this project on the command line. Any settings you specify on the command line will override the defaults in the project. For details of what you can customise in the project please see the SQL Doc project documentation. In the example above, the line to use a project is commented out, but you can uncomment this line and then pass a path to a .sqldoc project file as an argument to this script. Conclusion Keeping documentation about your databases up to date is very easy to set up using SQL Doc and PowerShell. By using a CI server to run this process you can trigger the documentation to be run on every change to a source controlled database, and keep historic documentation available. If you are considering more advanced database automation, e.g. database unit testing, change script generation, deploying to large numbers of targets and backup/verification, please email me at [email protected] for further script samples or if you have any questions.

Search Results

Search found 10751 results on 431 pages for 'day cq'.

Page 396/431 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403 | Next Page >

- by pinaldave

- by Matthew Guay

- by BuckWoody

- by David Allan

- by Bill Graziano

- by pinaldave

- by Knut Vatsendvik

- by Pinal Dave

- by Stephen Walther

- by Ben Emmett

- by dwahlin

- by paxer

- by kerry

- by Rick Strahl

- by pinaldave

- by Lewis Benge

- by Tim Dexter

- by Rick Strahl

- by Antoinette O'Sullivan

- by RonGarlit

- by james.bayer

- by Simon Cooper

- by rsp

- by AnkurGupta

- by Jonathan Hickford

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403 | Next Page >