Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 396/1328 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

• Running git-svn with cron results in garbage in .git

  - by Paul

  I've setup a git-svn repo with cron to fetch from the svn repo daily. I have a script to do the fetching, and this is what is invoked by cron. Everything is fine with the repo, and the script works fine when executed manually. However, when it runs under cron, empty files get dropped into the .git directory. The files have names that look like they are some base64 output, e.g. juTrvjP6m8 and kcKf3hu3b4. Two of these files show up for every cron run. I thought these might be commit hashes, but they're not, git-show says it's an unknown revision. I set-up the repo as follows: git svn init http://svn.ip.addr/repo git svn fetch svn-remote My script looks like this: cd /gitsvn/dir git svn fetch svn-remote git svn push pub The last line pushes the repo to a separate (bare) public repo from which others can clone. I'm piping the output from the cron job to a file, which looks like this: fatal: unable to run 'git-svn' Counting objects: 21, done. Delta compression using up to 2 threads. Compressing objects: 100% (10/10), done. Writing objects: 100% (11/11), 59.08 KiB, done. Total 11 (delta 8), reused 0 (delta 0) To /gitpub/repo.git 360faf5..a153b0d trunk -> trunk The line "fatal: unable to run 'git-svn'" is alarming, but the fetch seems to go ahead anyway. Any suggestions? Where are these empty garbage files coming from, and how to stop them? Am I in for bigger problems in the future? BTW, I'm using git 1.6.3.3.

  Read the article

• Ubuntu dpkg error , after crash and filesystem error recovery

  - by Radian

  Ubuntu recently crashed , causing it's partition damaged ( which is EXT4) and Ubuntu was unable to boot , because it couldn't mount anything , only displays Busybox So I used the Live CD to run fsck on the partition, which fixed it , but deleted some nodes Now Ubuntu is working , but some files were missing , for example I lost the Panels configurations and Chromium's Extensions The Most Annoying problem , that there is some files corrupted , for example when I try to install any program, I got this (Reading database ... 95%dpkg: unrecoverable fatal error, aborting: files list file for package 'libservlet2.4-java' is missing final newline I tried these commands dpkg --configure -a apt-get -f install and from GUI , Synaptic Package Manager Fix Broken Packages So this file "libservlet2.4-java" Does anyone knows what it does ! and where it's location ? and how can I fix/get-correct-version-of it ? Also , is there any way I could tell Ubuntu to Check for ALL it's file , and if there is something corrupted it should recover it form the CD ?

  Read the article

• Display \n characters as newlines when using tail?

  - by GSto

  I have a file that I am trying to read by using tail -f. I was wondering if there was a way to have the terminal output an actual line break instead of the \n character.

  Read the article

• Problem with UBUNTU 10.4 and ATI

  - by Maximilinao

  Hi, I'm having a problem installing the drivers from the video card. Just finished installing the driver, reboot my OS, and my monitor is starting off in energy saving mode and does not boot UBUNTU. What I can do?. Sorry for my English. I used the google translator

  Read the article

• Enabling mod_rewrite on Amazon Linux

  - by L. De Leo

  I'm trying to enable mod_rewrite on an Amazon Linux instance. My Directory directives look like this: <Directory /> Order deny,allow Allow from all Options None AllowOverride None </Directory> <Directory "/var/www/vhosts"> Order allow,deny Allow from all Options None AllowOverride All </Directory> And then further down in httpd.conf I have the LoadModule directive: ... other modules... #LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule proxy_module modules/mod_proxy.so ... other modules... I have commented out all the Apache modules not needed by Wordpress. Still when I issue http restart and then check the loaded modules with /usr/sbin/httpd -l I get only: [root@foobar]# /usr/sbin/httpd -l Compiled in modules: core.c prefork.c http_core.c mod_so.c Inside the virtual host containing the Wordpress site I have an .htaccess containing: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress The .htaccess is owned by apache which is the user apache runs under. The apachectl -t command returns Syntax OK What am I doing wrong? What should I check?

  Read the article

• Help setting up NSD daemon (DNS server)

  - by Catalin

  While searching for a secure dns server I came across the NSD project. I was really impressed by what seemed to me the best option out there that's open source. One problem thought their 'tutorial' is really not beginner friendly. I have basic DNS knoledge but what's in there is out of my league. I need to have multiple sites on this CentOS server I've recently got my hands on. They also need to receive email. Details: I have a master host and would love to set this in the way described in the rows that follow: masterhost.com -> ns1.masterhost.com mail.masterhost.com www.masterhost.com addonhost.com -> ns1.masterhost.com mail.masterhost.com www.addonhost.com And so on. Any help in setting up this DNS server please? All answers and suggestions are welcomed. Thank you in advance.

  Read the article

• Top/left edges of screen, in Virtualbox, act like bottom/right edges

  - by Ken

  I have Virtualbox running on Windows Vista, and Debian running inside Virtualbox. Everything's running great, for the most part. Everything looks correct. But when I'm in full-screen mode, the top edge seems to act (to the mouse) like it's the bottom edge, and the left edge seems to act like the right edge. For example, if I click in the middle of the desktop and drag left, as if to select some icons, when I hit the very leftmost pixel of the screen, the selection (but not the mouse pointer) jumps to the far right edge of the screen). For the left edge, it's not such a big deal, but not having the top edge is kind of annoying: it means I can't select things from the menu in my top panel by slamming the mouse against the top of the screen. Anyone seen this before? Is there some way to make this work? Thanks!

  Read the article

• HIGH CPU USAGE + low memory usage

  - by hadi

  as you can see in below , there are high cpu usage by httpd request. please help me to decrease them. thanks. 28577 apache 15 0 99676 53m 3488 S 21 0.2 1:13.67 httpd 28568 apache 15 0 99676 53m 3496 S 19 0.2 1:14.92 httpd 28608 apache 15 0 99676 53m 3428 R 19 0.2 0:28.28 httpd 28615 apache 15 0 99676 53m 3436 R 19 0.2 0:25.33 httpd 28616 apache 15 0 99676 53m 3440 S 19 0.2 0:25.83 httpd 28619 apache 15 0 99676 53m 3436 R 19 0.2 0:26.12 httpd 28635 apache 15 0 97.9m 54m 3416 S 19 0.2 0:24.86 httpd 28558 apache 15 0 97.9m 54m 3432 R 17 0.2 1:40.75 httpd 28560 apache 15 0 97.9m 54m 3496 R 17 0.2 1:40.02 httpd 28621 apache 15 0 97.9m 54m 3420 S 17 0.2 0:25.61 httpd 28641 apache 16 0 97.9m 54m 3428 R 17 0.2 0:21.52 httpd 28642 apache 15 0 99756 53m 3424 R 15 0.2 0:21.46 httpd 28643 apache 15 0 99676 53m 3424 S 15 0.2 0:21.59 httpd 28594 apache 15 0 99756 53m 3428 R 13 0.2 0:44.41 httpd 28618 apache 15 0 99676 53m 3420 S 13 0.2 0:26.15 httpd 28654 apache 15 0 99676 53m 3472 S 13 0.2 0:04.27 httpd 28575 apache 15 0 99756 53m 3436 R 11 0.2 1:14.02 httpd 28576 apache 15 0 99676 53m 3496 S 11 0.2 1:16.79 httpd 28634 apache 15 0 99676 53m 3436 S 11 0.2 0:25.36 httpd 28653 apache 15 0 99676 53m 3424 S 11 0.2 0:04.35 httpd 28574 apache 15 0 99676 53m 3440 S 10 0.2 1:13.05 httpd 28592 apache 15 0 99676 53m 3492 R 10 0.2 0:45.78 httpd 28595 apache 15 0 99676 53m 3432 R 10 0.2 0:47.02 httpd 28617 apache 16 0 99676 53m 3436 S 10 0.2 0:25.32 httpd 28620 apache 15 0 99676 53m 3432 S 10 0.2 0:25.35 httpd 28597 apache 15 0 99676 53m 3428 S 8 0.2 0:43.56 httpd 11345 mysql 15 0 2927m 198m 4472 R 4 0.6 1624:43 mysqld 1 root 15 0 2036 648 552 S 0 0.0 0:16.97 init 2 root RT 0 0 0 0 S 0 0.0 0:48.50 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:26.72 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:04.98 migration/1 6 root 34 19 0 0 0 R 0 0.0 0:27.51 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:15.42 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:26.50 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2

  Read the article

• Not sure about ACL permissions

  - by Darko Miletic

  I'm writing up something about ACL usage on CentOS but since I still do not have a box ready I would like to ask something. Let us assume we have a folder /var/www/test If I do this in terms of permissions: /bin/chown -R root:root /var/www/test/ /bin/chmod -R u=rwx,go= /var/www/test/ /usr/bin/setfacl -R -m u:apache:rwx /var/www/test/ Will user apache be able to change owner of folder test or of any particular file within that folder? If answer is yes shall I than use group instead of user?

  Read the article

• How to: Install ubuntu 10.04 on a netbook without killing existing windows and recovery hdd

  - by dassouki

  The question is in the title

  Read the article

• Router failover not detecting outside interface link lost

  - by Matt

  Suppose I have two routers configured in master/slave configuration. They look something like this (addresses are not real ones) 123.123.123.10 <===> [eth0] Router 1 (10.1.1.2) [eth1] ===> +----------+ | 10.1.1.1 | ===> LAN 172.123.123.10 <===> [eth0] Router 2 (10.1.1.3) [eth1] ===> +----------+ The 10.1.1.1 is the default route for the Network (10.1.1.0). What's slightly different in this config to other's I've seen is that I don't have an external virtual IP. Also, the 10.1.1.1 addresses are in real life, public IP's (not private ones shown here). This is more of a router setup than a firewall setup so I'm not using NAT here. Now the issue that I'm having is that I can't see any way to configure UCARP or VRRP to monitor both eth0 & eth1 and fail over to the backup router should either of them go down. What I'm seeing is that if Router1 is the master and I unplug eth0 on router1, it doesn't fail over to router 2. However, it will if instead I unplug eth1 of router 1. In VRRP I see there is a cluster group, but it seems that for this to work you need to have virtual ip's or vrrp instances rather than actual interfaces assigned to it. I hope my explanation is clear. How do I get around this?

  Read the article

• Finding latest successful logins and failed attempts to a CentOS server

  - by ahmad

  I'm looking for a log file or any service to report the latest login attempts which have failed due to username/password miss match. Is there such utility available for CentOS? (built-in is preferred) My second question, and more generally, I need a log file of penetration attempts to my server. Ideally, this log should contain all attempts including logins, httpd activities, and other conventional open ports.

  Read the article

• Debian software raid 1: boot from both disk

  - by bsreekanth

  I newly installed debian squeeze with software raid.The way I did was, as also given in this thread. I have 2 HDD with 500 GB each. For each of them, I created 3 partitions (/boot, / and swap) I selected the hard drive and created a new partition table I created a new partition that was 1GB. I then specified to use the partition as a Physical Volume for RAID. and used for /boot and enabled bootable. Created another partition, which is of 480 GB, and then specified to use the partition as a Physical Volume for RAID. and used for /. Created another partion and used for swap Then RAID configuration: Through Configure RAID menu - create MD device - (2 for the number of drives, 0 for spare devices) Next select the partitions you want to be members of /dev/MD0. I selected /dev/sda1 and /dev/sdb1 (for /boot) Next select the partitions you want to be members of /dev/MD1. I selected /dev/sda6 and /dev/sdb6 (for /) And no RAID for swap partitions 'Finish Partitioning and write changes to disk' -- Finish the rest of the install like normal Everything is ok now, except I am not sure how to test my raid config. When I pull the power of the HDD, it only boots from one disk. I read in some forum that I may have to install GRUB manually on the other. In Debian Squeeze, there is no grub command. Not sure how to make my software raid bootable from both disk. Also, please comment on my steps above. Anything unusual. I configured /boot partitions of both disks to be boot=yes. Not sure whether that is ok. Thanks, Bsr

  Read the article

• Process not Listed by PS or in /proc/

  - by Hammer Bro.

  I'm trying to figure out how to operate a rather large Java program, 'prog'. If I go to its /bin/ dir and configure its setenv.sh and prog.sh to use local directories and my current user account. Then I try to run it via "./prog.sh start". Here are all the relevant bits of prog.sh: USER=(my current account) _CMD="/opt/jdk/bin/java -server -Xmx768m -classpath "${CLASSPATH}" -jar "${DIR}/prog.jar"" case "${ACTION}" in start) nohup su ${USER} -c "exec ${_CMD} >>${_LOGFILE} 2>&1" >/dev/null & echo $! >${_PID} echo "Prog running. PID="`cat ${_PID}` ;; stop) PID=`cat ${_PID} 2>/dev/null` echo "Shutting down prog: ${PID} kill -QUIT ${PID} 2>/dev/null kill ${PID} 2>/dev/null kill -KILL ${PID} 2>/dev/null rm -f ${_PID} echo "STOPPED `date`" >>${_LOGFILE} ;; When I actually do ./prog.sh start, it starts. But I can't find it at all on the process list. Nor can I kill it manually, using the same command the shell script uses. But I can tell it's running, because if I do ./prog.sh stop, it stops (and some temporary files elsewhere clean themselves out). ./prog.sh start Prog running. PID=1234 ps eaux | grep 1234 ps eaux | grep -i prog.jar ps eaux >> pslist.txt (It's not there either by PID or any clear name I can find: prog, java or jar.) cd /proc/1234/ -bash: cd: /proc/1234/: No such file or directory kill -QUIT 1234 kill 1234 kill -KILL 1234 -bash: kill: (1234) - No such process ./prog.sh stop Shutting down prog: 1234 As far as I can tell, the process is running yet not in any way listed by the system. I can't find it in ps or /proc/, nor can I kill it. But the shell script can still stop it properly. So my question is, how can something like this happen? Is the process supremely hidden, actually unlisted, or am I just missing it in some fashion? I'm trying to figure out what makes this program tick, and I can barely prove that it's ticking! Edit: ps eu | grep prog.sh (after having restarted; so random PID) 50038 19381 0.0 0.0 4412 632 pts/3 S+ 16:09 0:00 grep prog.sh HOSTNAME=machine.server.com TERM=vt100 SHELL=/bin/bash HISTSIZE=1000 SSH_CLIENT=::[STUFF] 1754 22 CVSROOT=:[DIR] SSH_TTY=/dev/pts/3 ANT_HOME=/opt/apache-ant-1.7.1 USER=[USER] LS_COLORS=[COLORS] SSH_AUTH_SOCK=[DIR] KDEDIR=/usr MAIL=[DIR] PATH=[DIRS] INPUTRC=/etc/inputrc PWD=[PWD] JAVA_HOME=/opt/jdk1.6.0_21 LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass M2_HOME=/opt/apache-maven-2.2.1 SHLVL=1 HOME=[~] LOGNAME=[USER] SSH_CONNECTION=::[STUFF] LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/grep OLDPWD=[DIR] I just realized that the stop) part of prog.sh isn't actually a guarantee that the process it claims to be stopping is running -- it just tries to kill the PID and suppresses all output then deletes the temporary file and manually inserts STOPPED into the log file. So I'm no longer so certain that the process is always running when I ps for it, although the code sample above indicates that it at least runs erratically. I'll continue looking into this undocumented behemoth when I return to work tomorrow.

  Read the article

• How can I pass environment variables to a WSGI script, using uWSGI?

  - by orokusaki

  I've added the following line to /etc/environment: FOO_DEPLOYMENT_ENV="vbox" Upon logging in via SSH, I can echo $FOO_DEPLOYMENT_ENV and, of course, see vbox output to the shell. If I open a Python shell and run os.getenv('FOO_DEPLOYMENT_ENV'), it will return 'vbox', but the same code in my Python application, when run by uWSGI (as the www-data user), it does not see the environment variable. Clearly, this isn't a problem of uWSGI, and is rather a problem with my understanding of environment variables, or how they're properly set, and the contexts in which they can be retrieved. What am I doing or understanding incorrectly?

  Read the article

• define software path

  - by shantanuo

  I have an older version already installed. I have upraded the package using setup.py install command. But the path is not correctly set. When I type "s3cmd" is shows the older version of software. # s3cmd s3cmd [options] <command> [arg(s)] version 1.2.6 --help -h --verbose -v --dryrun -n # which s3cmd /usr/local/bin/s3cmd The correct version is in different folder and I will like that to be used whenever I type the command. # /usr/bin/s3cmd Consider using --configure parameter to create one. How do I set path? I have added path to .bash_profile file but it does not work. PATH=$PATH:/usr/bin/s3cmd

  Read the article

• Why does the CentOS 5.8 install give an error about CD-ROM drive when using HP ILO?

  - by Mike B

  CentOS 5.8 I'm trying to install CentOS 5.8 on a box. I'm connecting the ISO to the server via a virtual disk using HP ILO. It initially seems to boot fine but in the middle of the anaconda text-mode package installation, it gives the following error: CD Not Found CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry. If I click OK, it gives me the same error. I don't understand how it could get this far and then complain about the CD-ROM drive. Any thoughts?

  Read the article

• SSH: How to change value in config file in one command

  - by Brian Graham

  How can I change the value of, let's say, PasswordAuthentication in /etc/ssh/sshd_config in commands? As well, remove a # in front of the "key" I wish to value. These don't all have to be in one command. I setup quite a few servers, and remembering where everything is gets exhausting, so I want to get a series of commands I can copy paste and it does the work for me for future reference. Sample values: PermitRootLogin no ChallengeResponseAuthentication no PasswordAuthentication no UsePAM no UseDNS no

  Read the article

• How to upgrade XMBC Live from 9.04.1 to 9.11?

  - by sunpech

  I've been unable to do a fresh install of XBMC Live 9.11 to my hard drive. Everytime it fails at the Install System step. But I am able to get XBMC Live 9.04.1 to install successfully. How do I upgrade XBMC Live 9.04.1 to 9.11? I understand that Ctrl+Shift+F2 brings up the command line, but what are the next set of commands to run?

  Read the article

• RHEL5 + Awesome WM - How do i fix mod4 inversion (acts like mod4 is always pressed)

  - by sgr

  I built and installed Awesome WM on RHEL5. I have problem with mod4 acting like its always pressed. ie every time i hit "Enter" it acts like Mod4+Enter was hit. I have to hold down mod4 key (I remapped it to Caps_Lock) to actually send through just a Enter. How do i fix this? PS: If i change the WM this problem doesnt exist. yes. I do. It is mostly tab configs though. I didnt change key combos. Also, the version of awesomeWM i compiled is 3.1.1 (had trouble getting deps for the latest AwesomeWM on Rhel5)

  Read the article

• sendmail: how can I restrict access to clients that only have a valid certificate?

  - by lxg

  I want to reject all connections that don't present a valid SSL/TLS certificate. First of all is the access db file the correct one to be changing? I have already tried using the basic rule given in the documentation CertIssuer:/C=US/ST=California/O=endmail.org/OU=private/CN= Darth+20Mail+20+28Cert+29/[email protected] RELAY This will obviously need a rule afterward to filter and reject all that don't present the cert? Does anyone have any pointers as to what syntax I should use? wildcards? lxg

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• iTunes alternative for managing iPhone 3G

  - by Bo Tian

  I'm totally sick and tired to starting my VMWare and run the Windows VM, and opening iTunes every time I want to do something with my iPhone. Is there any alternatives out there for iPhone 3G on 3.0 firmware? I don't mind jailbreaking it.

  Read the article

• See all output from commands performed inside screen

  - by user1032531

  I am using screen (http://www.gnu.org/software/screen/manual/screen.html) to access my minecraft console. I created a server in /etc/init.d, and have minecraft running in the background. Then, to access the minecraft console, I just type # screen -r in bash. I can now do commands in the screen shell. The problem is if I do some command which exports a bunch of text, it exceeds the size of the screen and pushes the begging output off the page. And I cannot seem to scroll up and see it. How can I scroll back and view all the output? How can I pause the output (maybe something like more or less)?

  Read the article

• Xfce power manager warns HAL daemon is not running, no keyboard on startup on Ubuntu

  - by Macha

  I changed my grub boot options to add "vga=0x323" to them to resolve some issues with corrupted display during startup/shutdown on my laptop. The next time I booted the system up, I got a warning over the login screen saying Xfce Power Manager HAL Daemon not running The keyboard and mouse are unresponsive. After a minute or so, they start to work and the system functions as normal. How can I solve this?

  Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >