Search Results

Search found 63641 results on 2546 pages for 'visual studio team system'.

Page 396/2546 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

  • Is Private Bytes >> Working Set normal?

    - by Jacob
    OK, this may sound weird, but here goes. There are 2 computers, A (Pentium D) and B (Quad Core) with almost the same amount of RAM running Windows XP. If I run the same code on both computers, the allocated private bytes in A never goes down resulting in a crash later on. In B it looks like the private bytes is constantly deallocated and everything looks fine. In both computers, the working set is deallocated and allocated similarly. Could this be an issue with manifests or DLLs (system)? I'm clueless. Also, I compiled the executable on A and ran it on B and it worked. Note: I observed the utilized memory with Process Explorer. Question: During execution (where we have several allocations and deallocations) is it normal for the number of private bytes to be much bigger (1.5 GB vs 70 MB) than the working set?

    Read the article

  • VB Project Template for Monobjc in MonoDevelop?

    - by Ira Rainey
    After installing Monobjc and playing around with the Monobjc Application Project under C# in MonoDevelop, I noticed that there is only an empty Monobjc project under the VB section. Obviously this template adds all the correct references but doesn't add the basic files for the application to run. I've tried creating a class with: Imports System Imports Monobjc Imports Monobjc.Cocoa Class Application Public Sub Main(Byval args() As String) ObjectiveCRuntime.LoadFramework("Cocoa") ObjectiveCRuntime.Initialize() End Sub End Class Obviously I'm not loading the NIB there either, as I haven't added that in either, but if I try to build this I get: /Source/VB_Sample/VB_Sample/<MyGenerator>(1,1): Error VBNC30420: Could not find a 'Sub Main' in ''. (VBNC30420) (VB_Sample) Where should I be putting the Sub Main? Also if I add in a xib file from IB, how do I generate the designer code for the partial AppDelegate class? Any help would be appreciated.

    Read the article

  • Activate a (COM Interop based) ActiveX contol using registration free com

    - by embnut
    I have a (COM Interop based) ActiveX contol that I am trying to use with registration free com. When the control loads the control is inactive (does not responds to events, control not fully rendered etc). After much search I discovered that COM objects using reg-free-com use the miscStatus attribute to set the initial state to get correctly activated. I know how to use it with a comClass which corresponds to a native COM Object. 1) What is the equivalent of the following for clrClass element which corresponds to a COM-interop object? <comClass clsid="{qqqqqqqq-wwww-eeee-rrrr-00C0F0283628}" tlbid="{xxxxxxxx-yyyy-zzzz-aaaa-0000F8754DA1}" threadingModel="Both" progid="SomeCompany.SomeOleControl" description="Some ActiveX Control" miscStatus="recomposeonresize,insideout,activatewhenvisible,nouiactivate" > 2) The COM client I am using is Visual FoxPro. If the (1) is not possible what can I do in VFP to activate the inactive ActiveX control. (I dont mind VB or C# input too if I can use it to find the equivalent foxpro) Currently I tried the following this.AddObject('OleControl1', 'oleControl', 'SomeCompany.SomeOleControl') this.OleControl1.AutoActivate = 3 this.OleControl1.Visible = .T. this.OleControl1.SetFocus But I the OleControl1 gets focus before passing events like mouse click to its subelements. So I have to click twice on it to do the necessary action, any time it does not have focus. I would like the control to act as if the "nouiactivate" of the miscStatus value is set. 3) Is there any other way of accomplishing what I want to do? Hans Passant, here is the listing of current Assembly.dll.manifest. The formatting in the comment made it unreadable. <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity name="Assembly" version="1.0.0.0" type="win32" publicKeyToken="wwwwwwwwwwwwwwww"/> <clrClass name="SomeCompany.SomeOleControl" clsid="{qqqqqqqq-wwww-eeee-rrrr-00C0F0283628}" progid="SomeCompany.SomeOleControl" threadingModel="Both"/> <file name="Assembly.tlb"> <typelib tlbid="{xxxxxxxx-yyyy-zzzz-aaaa-0000F8754DA1}" version="1.0" helpdir="" flags="hasdiskimage"/> </file> </assembly>

    Read the article

  • ASP: Extend control (ASCX) and access base markup file from subclass code

    - by Pathoschild
    Hello, I'm building form validation controls for our C# ASP application. The bulk of the work is handled by a BaseValidator control (subclassing System.Web.UI.UserControl), which also has the markup for the validation output. This is then extended by subcontrols like PasswordValidator, that provides the Validate method and any extra fields needed by that validator control. (The end goal is to have controls like <uc1:PasswordValidator ControlId="txtPassword" /> which we can plop into any form with minimum duplication.) However, PasswordValidator.ascx.cs cannot access the form elements defined in BaseValidator.ascx; the only way I've found to do so is to duplicate the markup in each subcontrol's *.ascx file. How can I extend BaseValidator.ascx.cs and access BaseValidator.ascx's markup in the subclass?

    Read the article

  • VS2010 MVC and Entity Framework Model in Separate Project

    - by mdm
    Hi, I am trying to use an Entity Framework Model (in separate project) into an asp.net 4 MVC project (VS2010, C#) If I create the EF inside the MVC project I have no problems. I think I am missing some step. things done: 1. added reference to the EF class project 2. added connection string in MVC web.config 3. added reference to System.Data.Entity in both web.config and project references Now i can use the model only if I copy the .edmx file to the Models folder, but in this way the EF project is not external anymore. What am I missing? Thank you in advance.

    Read the article

  • How to Add Css style sheet on DevExpress Gridview?

    - by Phsika
    i have big problem about CssFilePath property in ASPXGridView . also used Theme Deployer. i created ASPXGRidView that is goog in 9.3.4 version not problem is occured but i upgrated my system to 2010.2 version (Last version) but GridView CssFilePath not working my GridView looks html table. How can i solve it : i converted my project devexpress 9.3.4 to 2010.2 but My Working gridView look like this:TEST.ASCX has got a DevExpress GridView. <Styles CssFilePath="../../App_Themes/Aqua/GridView/styles.css" CssPostfix="Aqua"></Styles> i see asp.net design mode Aqua mode every thing ok. But press f5 my Gridview look above! how can i see aqua style...

    Read the article

  • FoxPro to C#: What best method between ODBC, OLE DB or another?

    - by Martin Labelle
    We need to read data from FoxPro 8 with C#. I'm gonna do some operations, and will push some of thoses data to an SQL Server database. We are not sure what's best method to read those data. I saw OLE DB and ODBC; what's best? REQUIRMENTS: The export program will run each night, but my company runs 24h a day. The DBF could sometimes be huge. We DON'T need to modify data. Our system, wich use FoxPro, is quite unstable: I need to find a way that ABSOLUTELY do not corrupt data, and, ideally, do not lock DBF files while reading. Speed is a minor requirement: it must be quick, but requirement #4 is most important.

    Read the article

  • Restart IIS7 webapp for debug in VS2008

    - by spender
    I'm developing an ASP.NET asyc generic handler which uses a static System.Threading.Timer instance to feed data to the response output stream while the context is in the asynchronous phase. I'm having issues at startup that I'd like to debug. Currently, because of the long-lived nature of the timer, I'm manually killing w3wp.exe in order to cause the application to restart. I'm aware that there are other ways to do this, but this is the best workflow I can find! Isn't there a way to force a cold start when I hit f5, instead of the standard VS approach of attaching to the existing IIS process?

    Read the article

  • razor intellisense not working on VS2010 for microsoft.web.helpers

    - by pomarc
    I have VS2010 Premium,.NET4.0, MVC3 Tools Update. I've nugetted microsoft-web-helpers successfully. I cannot get @razor intellisense to recognize the microsoft.web.helpers classes. They do work correctely at runtime, i.e. @Twitter.profile shows a profile, but at design time the statent is seen as an error and no members are shown after "." I've tried to add <add assembly="System.Web.Helpers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> to the <assemblies> element in web.config, but it didn't help. Any idea? thanks.

    Read the article

  • XSD sequence shows as abiguous!

    - by Tim C
    I have an XSD which was transformed from a RELAX NG schema with a few errors I am trying to fix. The big issue I have it with the following <xs:element name="list"> <xs:complexType> <xs:sequence> <xs:choice> <xs:sequence> <xs:element minOccurs="0" ref="preamble"/> <xs:element minOccurs="0" ref="title"/> </xs:sequence> <xs:sequence> <xs:element minOccurs="0" ref="title"/> <xs:element minOccurs="0" ref="preamble"/> </xs:sequence> </xs:choice> <xs:group maxOccurs="unbounded" ref="block-selectionListItem"/> </xs:sequence> <xs:attributeGroup ref="attlist-selectionList"/> </xs:complexType> </xs:element> As you can see the xs:choice block allows you to pick between two xs:sequence blocks. Seems to make sense except that Visual Studio gives the following warning on the second <xs:element minOccurs="0" ref="title/> element which is throwing everything off: Multiple definition of element 'title' causes the content model to become ambiguous. A content model must be formed such that during validation of an element information item sequence, the particle contained directly, indirectly or implicitly therein with which to attempt to validate each item in the sequence in turn can be uniquely determined without examining the content or attributes of that item, and without any information about the items in the remainder of the sequence. Because you can only choose one I do not see how this is ambiguous. Any help would be greatly appreciated! Edit: To be a bit more concise here are the possible outputs of the XML that would validate with this schema: <list> <preamble>My Preamble</preamble> <title>My Title</title> </list> or: <list> <title>My Title</title> <preamble>My Preamble</preamble> </list> As you can see it can be either one way or the other but not both. Also you could just have a title or a preamble and not both.

    Read the article

  • No exception, no error, still i dont recieve the json object from my http post

    - by user2978538
    My source code: final Thread t = new Thread() { public void run() { Looper.prepare(); HttpClient client = new DefaultHttpClient(); HttpConnectionParams.setConnectionTimeout(client.getParams(), 10000); HttpResponse response; JSONObject obj = new JSONObject(); try { HttpPost post = new HttpPost("http://pc.dyndns-office.com/mobile.asp"); obj.put("Model", ReadIn1); obj.put("Product", ReadIn2); obj.put("Manufacturer", ReadIn3); obj.put("RELEASE", ReadIn4); obj.put("SERIAL", ReadIn5); obj.put("ID", ReadIn6); obj.put("ANDROID_ID", ReadIn7); obj.put("Language", ReadIn8); obj.put("BOARD", ReadIn9); obj.put("BOOTLOADER", ReadIn10); obj.put("BRAND", ReadIn11); obj.put("CPU_API", ReadIn12); obj.put("DISPLAY", ReadIn13); obj.put("FINGERPRINT", ReadIn14); obj.put("HARDWARE", ReadIn15); obj.put("UUID", ReadIn16); StringEntity se = new StringEntity(obj.toString()); se.setContentType(new BasicHeader(HTTP.CONTENT_TYPE, "application/json")); post.setEntity(se); post.setHeader("host", "http://pc.dyndns-office.com/mobile.asp"); response = client.execute(post); if (response != null) { InputStream in = response.getEntity().getContent(); } } catch (Exception e) { e.printStackTrace(); } Looper.loop(); } }; t.start(); } } i want to send an Json object to a Website. As far as I can see, I set the header, but still I get this exception, can someone help me? (I'm using Android-Studio) __ Edit: i don't get any exceptions anymore, but still i do not receive the json packet. When i manually call the website i get a log file entry. Does anyone know, what's wrong? Edit2: When i debug i get as response "HTTP/1.1 400 bad request" i'm sure its not an permission problem. Any ideas?

    Read the article

  • After installing VS 2010 - Generic Host Process For Win32 Services problem starts.

    - by Muhammad Kashif Nadeem
    After installing VS 2010 trial I am getting this error "Generic Host Process For Win32 Services Encountered A Problem and needs to close. When this message pops my computer just stuck and I can not even restart it normally. I have found one fix on net but after that fix I can not access my LAN. This fix change these values in registry. HKLM\SYSTEM\CurrentControlSet\Services\netbt\parameters TransportBindName HKLM\Software\Microsoft\OLE EnableDCOM If I revert these registry changes then I again start getting 'Generic Host Process For Win32 Services' I have uninstall VS 2010 but this problem persist. This problem is not because of any virus. Any help to fix this or I have to re install Windows. Thanks.

    Read the article

  • How to force VS 2010 to skip "builds" of projects which haven't changed?

    - by Ladislav Mrnka
    Our product's solution has more than 100+ projects (500+ksloc of production code). Most of them are C# projects but we also have few using C++/CLI to bridge communication with native code. Rebuilding the whole solution takes several minutes. That's fine. If I want to rebuilt the solution I expect that it will really take some time. What is not fine is time needed to build solution after full rebuild. Imagine I used full rebuild and know without doing any changes to to the solution I press Build (F6 or Ctrl+Shift+B). Why it takes 35s if there was no change? In output I see that it started "building" of each project - it doesn't perform real build but it does something which consumes significant amount of time. That 35s delay is pain in the ass. Yes I can improve the time by not using build solution but only build project (Shift+F6). If I run build project on particular test project I'm currently working on it will take "only" 8+s. It requires me to run project build on correct project (the test project to ensure dependent tested code is build as well). At least ReSharper test runner correctly recognizes that only this single project must be build and rerunning test usually contains only 8+s compilation. My current coding Kata is: don't touch Ctrl+Shift+B. The test project build will take 8s even if I don't do any changes. The reason why it takes 8s is because it also "builds" dependencies = in my case it "builds" more than 20 projects but I made changes only to unit test or single dependency! I don't want it to touch other projects. Is there a way to simply tell VS to build only projects where some changes were done and projects which are dependent on changed ones (preferably this part as another build option)? I worry you will tell me that it is exactly what VS is doing but in MS way ... I want to improve my TDD experience and reduce the time of compilation (in TDD the compilation can happen twice per minute). To make this even more frustrated I'm working in a team where most of developers used to work on Java projects prior to joining this one. So you can imagine how they are pissed off when they must use VS in contrast to full incremental compilation in Java. I don't require incremental compilation of classes. I expect working incremental compilation of solutions. Especially in product like VS 2010 Ultimate which costs several thousands dollars. I really don't want to get answers like: Make a separate solution Unload projects you don't need etc. I can read those answers here. Those are not acceptable solutions. We're not paying for VS to do such compromises.

    Read the article

  • How to get Resharper to show a Refactoring that it already has.

    - by AngryHacker
    Whenever Resharper encounters code like this: (treeListNode.Tag as GridLine).AdvertiserSeparation = 5; it presents you with a possible fix (since treeListNode.Tag as GridLine might be null). It says: 'Replace with Direct Cast', which turns the code into the following: ((GridLine) treeListNode.Tag).AdvertiserSeparation = 5; This is great. However, when it encounters code like this: GridLine line = treeListNode.Tag as GridLine; line.AdvertiserSeparation = 5; Resharper simply displays a warning 'Possible System.NullReferenceException', but does not offer me to 'Replace with Direct Cast'. Is there a way to make Resharper offer me this refactoring, since it already has it?

    Read the article

  • How do I set my development web browser in VS2010?

    - by blesh
    I don't like to use IE for my system default web browser. but I do want to set IE as my browser in VS2010 because it works a little nicer for debugging and I like to develop to the lowest common denominator. (jab, lol)... anyhow, can I default to debugging against IE? I know in VS2008 you just had to "Browse With..." on an .aspx page. But that option doesn't exist in VS2010 RC. What gives?

    Read the article

  • Doesn't get into Debug Mode

    - by Grace Jones
    When I Press F5 on my VS2005 to debug the application, it launches the web app window but it is coming out of debug mode. When I tried to trace the Error in the EventViewer, this was the error: Failed in Token.vb(GetToken). The token was not in memory and the identity of the authenticated IIS caller was not permitted. The session may have unexpectedly terminated. The specific error message included: Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the \\ section in the application configuration. I don't have any httpModules section in my config file and the sessionState mode="InProc"...

    Read the article

  • How would I access the Windows Login (Authentication) API from a C++ Service Application?

    - by Gabriel
    Let us imagine for a moment that I have a piece of hardware that can act as an authentication for a user on a given system. I want to write an application in C++ to run as a service, look for this device and if found log the appropriate user in. I believe I have found the API's I would need to use to perform the hardware and service portions of the application but am having a hard time nailing down a way to create a "real" user login. Is this possible? If so where would I look to find resources on accomplishing this? I think of it as being an analog to fingerprint scanner login type devices.

    Read the article

  • How can I keep a graphics object centered (like a circle) when zooming in or out on it?

    - by sonny5
    using System; using System.Drawing; using System.Collections; using System.ComponentModel; using System.Windows.Forms; using System.Data; using System.Drawing.Drawing2D; using System.Drawing.Imaging; namespace testgrfx { public class Form1 : System.Windows.Forms.Form { float m_Scalef; float m_Scalefout; Rectangle m_r1; private System.Windows.Forms.Button button2; private System.Windows.Forms.Button button3; private System.ComponentModel.Container components = null; private void InitializeComponent() { m_Scalef = 1.0f; // for zooming purposes Console.WriteLine("opening m_Scalef= {0}",m_Scalef); m_Scalefout = 1.0f; Console.WriteLine("opening m_Scalefout= {0}",m_Scalefout); m_r1 = new Rectangle(50,50,100,100); this.AutoScrollMinSize = new Size(600,700); this.components = new System.ComponentModel.Container(); this.button2 = new System.Windows.Forms.Button(); this.button2.BackColor = System.Drawing.Color.LightGray; this.button2.Location = new System.Drawing.Point(120, 30); this.button2.Name = "button2"; this.button2.Size = new System.Drawing.Size(72, 24); this.button2.TabIndex = 1; this.button2.Text = "Zoom In"; this.button2.Click += new System.EventHandler(this.mnuZoomin_Click); this.Controls.Add(button2); this.button3 = new System.Windows.Forms.Button(); this.button3.BackColor = System.Drawing.Color.LightGray; this.button3.Location = new System.Drawing.Point(200, 30); this.button3.Name = "button3"; this.button3.Size = new System.Drawing.Size(72, 24); this.button3.TabIndex = 2; this.button3.Text = "Zoom Out"; this.button3.Click += new System.EventHandler(this.mnuZoomout_Click); this.Controls.Add(button3); //InitMyForm(); } public Form1() { InitializeComponent(); Text = " DrawLine"; BackColor = SystemColors.Window; // Gotta load these kind at start-up ... not with button assignments this.Paint+=new PaintEventHandler(this.Form1_Paint); } static void Main() { Application.Run(new Form1()); } /// Clean up any resources being used. protected override void Dispose( bool disposing ) { if( disposing ) { if (components != null) { components.Dispose(); } } base.Dispose( disposing ); } // autoscroll2.cs does work private void Form1_Paint(object sender, System.Windows.Forms.PaintEventArgs e) { Graphics dc = e.Graphics; dc.PageUnit = GraphicsUnit.Pixel; dc.PageScale = m_Scalef; Console.WriteLine("opening dc.PageScale= {0}",dc.PageScale); dc.TranslateTransform(this.AutoScrollPosition.X/m_Scalef, this.AutoScrollPosition.Y/m_Scalef); Pen pn = new Pen(Color.Blue,2); dc.DrawEllipse(pn,m_r1); Console.WriteLine("form_paint_dc.PageUnit= {0}",dc.PageUnit); Console.WriteLine("form_paint_dc.PageScale= {0}",dc.PageScale); //Console.Out.NewLine = "\r\n\r\n"; // makes all double spaces } private void mnuZoomin_Click(object sender, System.EventArgs e) { m_Scalef = m_Scalef * 2.0f; Console.WriteLine("in mnuZoomin_Click m_Scalef= {0}",m_Scalef); Invalidate(); // to trigger Paint of entire client area } // try: System.Drawing.Rectangle resolution = Screen.GetWorkingArea(someForm); private void Form1_MouseDown(object sender, System.Windows.Forms.MouseEventArgs e) { // Uses the mouse wheel to scroll Graphics dc = CreateGraphics(); dc.TranslateTransform(this.AutoScrollPosition.X/m_Scalef, this.AutoScrollPosition.Y/m_Scalef); Console.WriteLine("opening Form1_MouseDown dc.PageScale= {0}", dc.PageScale); Console.WriteLine("Y wheel= {0}", this.AutoScrollPosition.Y/m_Scalef); dc.PageUnit = GraphicsUnit.Pixel; dc.PageScale = m_Scalef; Console.WriteLine("frm1_moudwn_dc.PageScale= {0}",dc.PageScale); Point [] mousep = new Point[1]; Console.WriteLine("mousep= {0}", mousep); // make sure to adjust mouse pos.for scroll position Size scrollOffset = new Size(this.AutoScrollPosition); mousep[0] = new Point(e.X-scrollOffset.Width, e.Y-scrollOffset.Height); dc.TransformPoints(CoordinateSpace.Page, CoordinateSpace.Device,mousep); Pen pen = new Pen(Color.Green,1); dc.DrawRectangle(pen,m_r1); Console.WriteLine("m_r1= {0}", m_r1); Console.WriteLine("mousep[0].X= {0}", mousep[0].X); Console.WriteLine("mousep[0].Y= {0}", mousep[0].Y); if (m_r1.Contains(new Rectangle(mousep[0].X, mousep[0].Y,1,1))) MessageBox.Show("click inside rectangle"); } private void Form1_Load(object sender, System.EventArgs e) { } private void mnuZoomout_Click(object sender, System.EventArgs e) { Console.WriteLine("first line--mnuZoomout_Click m_Scalef={0}",m_Scalef); if(m_Scalef > 9 ) { m_Scalef = m_Scalef / 2.0f; Console.WriteLine("in >9 mnuZoomout_Click m_Scalef= {0}",m_Scalef); Console.WriteLine("in >9 mnuZoomout_Click__m_Scalefout= {0}",m_Scalefout); } else { Console.WriteLine("<= 9_Zoom-out B-4 redefining={0}",m_Scalef); m_Scalef = m_Scalef * 0.5f; // make it same as previous Zoom In Console.WriteLine("<= 9_Zoom-out after m_Scalef= {0}",m_Scalef); } Invalidate(); } } // public class Form1 }

    Read the article

  • How do I set my development web browser in VS2010 RC?

    - by blesh
    I don't like to use IE for my system default web browser. but I do want to set IE as my browser in VS2010 because it works a little nicer for debugging and I like to develop to the lowest common denominator. (jab, lol)... anyhow, can I default to debugging against IE? I know in VS2008 you just had to "Browse With..." on an .aspx page. But that option doesn't exist in VS2010 RC. What gives?

    Read the article

  • Generating code for service proxies

    - by Hadi Eskandari
    I'm trying to generate some additional code base on the auto-generated webservice proxies in my VS2010 solution, I'm using a T4 template to do so. The problem is, automatically generated proxies are added in "Service Reference" folder but ProjectItems (files) are hidden by default and the following code does not find them in the project structure: var sr = GetProjectItem(project, "Service References"); if(sr != null) { foreach(ProjectItem item in sr.ProjectItems) { foreach(var file in item.ProjectItems) { //Services.Add(new ServiceInfo { Name = file.Name }); } } } The above code runs and although service reference is found, and there are ProjectItems under that node (named by the webservice reference name), under object under that node is of type System.__ComObject and I'm not sure how to progress. Any help is appreciated.

    Read the article

  • ajaxtabcontainer with button postback problem

    - by yousof
    I have a dropdownlist in my web page and two command buttons and a tabcontainer. The tabcontainer does not appear after the load of page according to my code. Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load If Not IsPostBack Then TabContainer1.Visible = False If CtvAct.GetRecords("Fill_RequestTypeTb") = True Then ReqTypeCmbo.DataSource = CtvAct.MainDataset.Tables("tbOLRequestType").DefaultView ReqTypeCmbo.DataTextField = "RequestTypeName" ReqTypeCmbo.DataValueField = "RequestTypeId" ReqTypeCmbo.DataBind() Dim itm As New ListItem itm.Text = "-- ??? ??? ????? --" itm.Value = "-1" itm.Selected = True ReqTypeCmbo.Items.Insert(0, itm) ReqTypeCmbo.SelectedIndex = 0 End If End If End Sub Protected Sub PrntCmd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles PrntCmd.Click TextBox6.Text = "gggg" End Sub If I press any button after page load the button work very selecting any item from dropdownlist make the tabcontainer appear but after the tabcontainer appear, the buttons does not work (postback) how can I solve these problems

    Read the article

  • Get Process ID of Program Started with C# Process.Start

    - by ThaKidd
    Thanks in advance of all of your help! I am currently developing a program in C# 2010 that launches PLink (Putty) to create a SSH Tunnel. I am trying to make the program able to keep track of each tunnel that is open so a user may terminate those instances that are no longer needed. I am currently using System.Diagnostics.Process.Start to run PLink (currently Putty being used). I need to determine the PID of each plink program when it is launched so a user can terminate it at will. Question is how to do that and am I using the right .Net name space or is there something better? Code snippet: private void btnSSHTest_Click(object sender, EventArgs e) { String puttyConString; puttyConString = "-ssh -P " + cboSSHVersion.SelectedText + " -" + txtSSHPort.Text + " -pw " + txtSSHPassword.Text + " " + txtSSHUsername.Text + "@" + txtSSHHostname.Text; Process.Start("C:\\Program Files (x86)\\Putty\\putty.exe", puttyConString); }

    Read the article

  • onTextChanged Event for many Textboxes c#

    - by Alan Bennett
    Hi, I am currently building a prototype for a new system screen, and i am using c# to build this. The question i have is, i currently have 14 textboxes which are filled from a condition from a couple of other controls on the screen. these 14 textboxes all add up to a total shown in another textbox. as these textboxes are editable (in case the client wishes to increase the value) (cant go into to much detail but they will) I need to have a firable ontextchange event for when the values change so the total box updates. however i have a feeling there must be a way of not having to create 14 different events, is there a way that i can have 1 event which fires if any of the 14 text boxes are fired? thanks Alan

    Read the article

  • WCF Service error received when using TCP: "The message could not be dispatched..."

    - by StM
    I am new to creating WCF services. I have created a WCF web service in VS2008 that is running on IIS 7. When I use http the service works perfectly. When I configure the service for TCP and run I get the following error message. There was a communication problem. The message could not be dispatched because the service at the endpoint address 'net:tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc is unavailable for the protocol of the address. I have searched a lot of forums, including this one, for a resolution but nothing has worked. Everything appears to be set up correctly on IIS 7. WAS has been set up to run. The default web site has a net.tcp binding and the application has net.tcp under the enabled protocols. I am including what I think is the important part of the web.config from the host project and also the app.config from the client project I am using to test the service. Hopefully someone can spot my error. Thanks in advance for any help or recommendations that anyone can provide. Web.Config <bindings> <wsHttpBinding> <binding name="wsHttpBindingNoMsgs"> <security mode="None" /> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="CogIDServiceHost.ServiceBehavior" name="CogIDServiceLibrary.CogIdService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsgs" contract="CogIDServiceLibrary.CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <endpoint name="CoordinateIdService_TCP" address="net.tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc" binding="netTcpBinding" bindingConfiguration="" contract="CogIDServiceLibrary.CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> </service> </services> <behaviors> <serviceBehaviors> <behavior name="CogIDServiceHost.ServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> App.Config <system.serviceModel> <diagnostics performanceCounters="Off"> <messageLogging logEntireMessage="true" logMalformedMessages="false" logMessagesAtServiceLevel="false" logMessagesAtTransportLevel="false" /> </diagnostics> <behaviors /> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_CogIdTool" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> <binding name="wsHttpBindingNoMsg"> <security mode="None"> <transport clientCredentialType="Windows" /> <message clientCredentialType="Windows" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://sdet/CogId_WCF/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsg" contract="CogIdServiceReference.CogIdTool" name="IISHostWsHttpBinding"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://localhost:1890/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_CogIdTool" contract="CogIdServiceReference.CogIdTool" name="WSHttpBinding_CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://elec/CoordinateIdTool/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsg" contract="CogIdServiceReference.CogIdTool" name="IIS7HostWsHttpBinding_Elec"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="net.tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc" binding="netTcpBinding" bindingConfiguration="" contract="CogIdServiceReference.CogIdTool" name="IIS7HostTcpBinding_Elec" > <identity> <dns value="localhost"/> </identity> </endpoint> </client> </system.serviceModel>

    Read the article

  • Using C# assemblies from VB6 code. Some issues.

    - by AngryHacker
    I have a C# assembly, which is regasmed, but is not in the GAC. In my VB6 code, I added a reference to the generated type library (the .tlb file). Then I instantiate the C# lib in my VB6 code. If I run it from the VB6 IDE, it does not work. The Set in the code below: Dim obj as MyCSharpNamespace.MyCSharpObject Set obj = New MyCSharpNamespace.MyCSharpObject causes this error: Automation error The system cannot find the file specified However, if I compile the VB6 project to an EXE and run it, it runs perfectly fine. I should add that all the VB6 project files (e.g. forms, modules, etc...) are in the same folder as the C# DLL and TLB. So why can't I run it from the IDE environment?

    Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >