Search Results

Search found 13203 results on 529 pages for 'desktop ini'.

Page 398/529 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• No Cure for a Slow Computer?

  - by Marv

  I have a laptop with the following specs: 2.2gHz dual-core processor. 4gb of DDR2 Ram. 180gb HDD space. I have tried everything. I have reinstalled the OS. Installed Ubuntu with Lubuntu, LXDE, Gnome Classic, Unity 2D desktop. I have even tried downgrading to XP with all non-critical processes and services turned off. Even with the most stripped down version of Ubuntu it heats up and the fan starts churning. I'm out of ideas. I have tried everything. If you have any tips, please help. :'(

  Read the article

• Grub2 menu after vmware gust customization

  - by poopa

  Hi, I have ubuntu 9.10 desktop VMware VM with the default grub2 installed. There is some weird problem with this VM. When you clone this vm and have a customization script run, the cloned machine crashes at first boot (VMware does not officially suport customizaing Ubuntu newer than 8.04). After the creash the Grub boot menu is displayed but there is not time out. I checked /boot/grub/grub.cfg and it does indeed show a timeout of 10 seconds. Nothing happens till I select an option with the keyboard. The second time the Ubuntu loads, it does not crash. My question is, how do I make the grub menu timeout in that case? Thanks.

  Read the article

• How can I continue audio playback even after switching user?

  - by klyonrad

  I just tested it with iTunes; after switching the user account (only after logging into another account, to be precise) the audio playback from the account "A" stops. However iTunes continues playing in the background; which I realized after switching back to account "A". Very frustrating because it kind-of is a deal-breaker for me; the other person should be able to have some personalized settings; while it is still my computer, and the main account has all the music obviously. The ideal solution would be audio output continuing running while user still has the ability to manually pause it... EDIT: I tested a bit more: "Desktop" apps like VLC don't output sound but continue running; the stock Music.app in Metro pauses the music and continues playing when switching back.

  Read the article

• How can I fix a computer that is infested with malware and is extremely unresponsive? [closed]

  - by fredley

  Possible Duplicate: How do I get rid of malicious spyware, malware, viruses or rootkits from my PC? I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• Enterprise Data Center System Admin/Engineer to Server Ratio

  - by Bob

  I know there have been similar questions asked over the last few months however looking at a Data Center Operations and know there are some really smart people out there that might be able to help. Looking for some staffing best practices based on first hand experience and was hoping that there is some experience in this area that can provide "best practice" application: Three High Availability (99.99% plus) Enterprise Level Data Centers geographically dislocated, one manned 24x7x365, one lights out, one co-location running HOT-HOT-HOT supporting a global community. More than 2,000 operating systems consisting of 95% Windows, 5% Linux and Solaris, 45% virtualized, more than 100TB storage. No desktop support, no Network Administration (administrated separately), running N+1 and serving more than 250 Billion page views annually. Based on experience what has been your experience with Server to "Data Center System Administrator/Engineer" ratio? Thanks in advance for your responses.

  Read the article

• Kubuntu guest on Windows 8.1 Hyper-V won't shut down completely

  - by DarkMoon

  I've got a Windows 8.1 Professional laptop with Hyper-V installed, and a Kubuntu 14.04 Desktop VM. When I shutdown the Kubuntu VM, most of the time it gets to the logo screen, and just sits there. It's not frozen, because I can see the glow around the logo brighten and fade. I have installed the four Hyper-V modules, and lsmod shows them all running fine before the shutdown. Also, once it's stuck on the logo screen, if I send a CTL-ALT-DEL to the VM, it restarts immediately. Does anyone have any idea where I'd begin troubleshooting this? UPDATE: I've disabled the startup and shutdown screens, and now can see this output when it's stopped. Hopefully this sheds more light on the problem.

  Read the article

• how to design LAN connectivity between private and corporate ?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services). how can these hosts be accessed from outside of this privateLAN? Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software?

  Read the article

• Issues connecting VMWare VM to Windows 7 (host)

  - by MasterGberry

  I am on windows 7 trying to figure out why i cannot ping my computer or my VM from the other one, yet I am able to ping the router on both and other computers on the network. My desktop is running windows 7 64 bit and my vm is running CentOS 64 bit (which is what I use to test my web server stuff). At my school the VM has a dedicated IP and i don't have this issue, but I am home now and having issues trying to set this up behind my dumb router...I had already tried changing the VINC (i believe) to hide the vmnet1 and vmnet8 connections from the windows firewall and this seemed to have worked for like 5 minutes and then stopped... Any ideas? Thanks

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• Seemingly random disconnections on Windows Server 2008 R2

  - by bobblez

  So I have a box running a Windows Server 2008 R2 in my LAN, which is running, among other things, a voip server used by other people. I myself am in the same subnet with the server, while the other users are not. Now, maybe on average twice a day, all the other users get disconnected from the server (and if I take a remote desktop connection to it, I'm not able to open any web pages either). These disconnections usually last only about 5 seconds, but sometimes they may last up to a minute. What could possibly cause this? I have all the updates installed from windows update and the motherboard of the server is asus p5b deluxe (if that is of any interest). edit: Forgot to mention that my own internet connectivity stays intact while the server's does not, and both computers are behind the same router.

  Read the article

• 1024x768 gone (1024x600 availble) on HDMI, yesterday it worked?

  - by Gam Erix

  When I try to play a game called F-22 Total Air War 2.0 I get an error which says that the resolution 1024.768 is unsupported by the harware.. so I look into my desktop options and it looks like there is an option for 800x600, 1024x600, 1152x648 and higher wide screen resolutions but the 1024x768 is gone? I did play the game yezterday, I disconnected the HDMI, got upstairs, played a few more games, came back downstairs, plugged in the HDMI, launched the game and bam I got the error! I have a ATI Radeon Mobility HD5470 and the newest ATI Catalyst Center downloaded 3 days ago. How can I 'enable' the 1024x768 resolution again? Without it I can't play the game on my Big TV and I will be stuck with my little laptop screen.

  Read the article

• Grub2 menu after crash

  - by poopa

  Hi, I have ubuntu 9.10 desktop VMware VM with the default grub2 installed. There is some weird problem with this VM. When you clone this vm and have a customization script run, the cloned machine crashes at first boot (VMware does not officially suport customizaing Ubuntu newer than 8.04). After the creash the Grub boot menu is displayed but there is not time out. I checked /boot/grub/grub.cfg and it does indeed show a timeout of 10 seconds. Nothing happens till I select an option with the keyboard. The second time the Ubuntu loads, it does not crash. My question is, how do I make the grub menu timeout in that case? Thanks.

  Read the article

• Run shell script on Linux box from a shortcut/app in Android?

  - by melat0nin

  I have an Ubuntu box which runs XBMC, which crashes occasionally. Since I have no keyboard connected,I have to SSH in, kill xinit, then restart it. I was wondering if there's an elegant way of doing this from my Android tablet, so I don't have to go to my desktop PC. I've used ConnectBot and can log in, but typing is laborious, even using the edit keys to scroll back up through the buffer. It seems as though it should be possible to script this so that I can execute a shortcut, or at least select a predefined script to be executed. This would seem to have plenty of applications, and there could be a site of scripts - restart webserver, reboot, email logs etc

  Read the article

• How to backup old emails locally in Thunderbird and then remove them from IMAP server?

  - by saicode

  I am using Godaddy IMAP email with Thunderbird as my desktop client on Windows 7. The email service has unlimited mailbox size but the local Thunderbird is having troubles due to the large size of the inbox/outbox. I would like to take out old emails from IMAP server and backup them locally. After backing up the old email I would like to delete old email (older than let's say, 2012) from the server. Also I'd like to have them accessible from the local backup if ever needed in the future. This way I might be able to make Thunderbird fast and problem free. Problem is, I am not able to find any instruction to do this in an automated way based on dates etc. I can find some links for Archiving, Compacting and Backup. But unable to find any tutorial about how to backup and archive it locally and delete the original emails from the server.

  Read the article

• online to do list manager with subtasks

  - by alex

  I'm looking for an online task list tool, what I absolutely need is the infinite number of subtask levels, because that's how my mind works. I don't need collaboration. There are a lot of great to do list sites out there, but for some reason most of them have only one subtask level or no subtasks at all. I know about todoist, but its interface doesn't work for me. There must be many more, I guess. Links to desktop tools with the feature are also appreciated as long as they are cross-platform.

  Read the article

• Drive still usable if Seatools reports errors?

  - by Rob

  I have a Seagate 3TB Expansion Desktop drive that was part of a Linux RAID 6 array that failed. I eventually did a zero fill both through Seagate DiscWizard and via Linux dd, neither reported errors. When I ran Seatools now, I got: Short DST - Started 5/31/2014 10:04:36 PM Short DST - Pass 5/31/2014 10:05:37 PM Long Generic - Started 5/31/2014 10:15:19 PM Bad LBA: 518242762 Not Repaired (whole bunch of bad LBAs ommited) Bad LBA: 518715255 Not Repaired Long Generic Aborted 6/1/2014 3:12:18 AM i.e. the short test passed, the long test failed. Unfortunately, the drive is out of warranty, so I can't just RMA it. But I hate tossing a drive that can still be used. So, my questions are: If the zero fill succeeded, and the short test passed, can I still use the whole drive? if not, since I'm using LVM on top of RAID, is there a way to tell either of these to just skip the bad area? If not the above, can I just create partitions before and after the part of the drive with the bad LBAs?

  Read the article

• Updating GeForce 9200 driver on Vista (64-bit) yields installer failed

  - by weka

  OK, so I have a Windows Vista... more specifically this: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103182 a Acer Aspire AX3200-U3600A Desktop. I have DirectX 11 and I am trying to update my drivers... During the update of the latest one: GeForce 306.23 Driver my screen flashes a bit and goes black. This is standard when updating GRAPHIC DRIVERS. Then... my screen shifts 50 pixels or so to the left... OFFSCREEN. Not even Auto Image Adjust will fix the screen back... Then after that happens, I get this: Help, please? I just want to update my graphic drivers....

  Read the article

• Removing BIOS Post Messages

  - by Steve

  I am working on a project where a standard x86 desktop system will boot and run a single program until it is shut down. I would like to remove all the bios post messages so that it looks a little more "finished" and cleaner when it starts up. I was hoping that there might by a standard implementation/terms to know about so I can avoid having to dig through every manual to see if there are options, or get some advice on a standard set of tools I should be using. I was thinking about getting a board that has an image that covers up the post messages until you press a key and trying to customize it to all black, but it's not clear if this is a good direction. I started looking for OEM motherboards but my searches were filled with standard commercial stuff, or seemed to be way to big for my toy project. What is the best way to go about removing all the bios post messages and just having a blank screen or "loading" message until OS loads?

  Read the article

• Best cloud based IT Systems management services out there?

  - by Ryk

  Our startup organisation is growing fast in 2 different office locations. That brings new challenges and headaches. Our entire company is cloud based, and I am looking for a good product to manage our remote systems. Currently we do not have on-site AD servers, we are using the Windows Azure AD services, so cannot rely on group policies at this stage. I would like to be able to achieve the following: (they are all laptops) Remote Desktop Support Patch management Lock down software on machines (restrict them) Monitor and manage systems Other benefits would be good, but if I can achieve the ones listed above, it will go a long way. We have a combination of Windows 7 pro & Windows 8 & 8.1 machines. I am currently using Windows Intune, but it is really limited. Really just a glorified patch enforcer. Thank you in advance to your help.

  Read the article

• Configure (Apple) Mail to delete email from IMAP server after specified time

  - by ttarchala

  I am using a corporate mail account which is synchronized via IMAP to both my desktop client and my iPhone, which is exactly the way I like it. However, the account has a limited quota. With POP3 access, this was not a problem, as POP3 clients could be configured to remove messages from server after specified time. This option is missing from my Apple Mail IMAP account configuration pane. Is there a way to replicate this feature with an IMAP account, either on the client, or on the server side? If not, I will probably have to move old messages manually to some local folder on my Mac. Is there a method to retain a single-click searchability of both archived and current mail folders together?

  Read the article

• file sharing over external and internal networks

  - by pradvk

  Dear friends, Please tell me whether it is possible for someone on the external network to see the network folder shares of an internal LAN network in DHCP (192.168.x.x) through a Comp-A on an external network in DHCP (123.123.x.x) both networks are on different subnets but Comp-A has access to both networks and can see all the shared drives of both the internal and external networks using firewall is not an option because file sharing is required everywhere. care is taken from viruses/trojans... remote desktop etc is disabled on Comp-A Please let me know. Thanks and Regards pk

  Read the article

• Hide a 2nd Monitor from a Programs Print Screen

  - by jasondavis

  I run 2 monitors on a PC that also runs a program for the Freelancing site Elance.com. The program they provide, takes screenshots and uploads them to my account for a client to see at different intervals. My goal is to make the screenshot that the program takes and uploads, to somehow only take a shot of my "Main" or "Defualt" monitor and ignore my 2nd monitor. The main reason is my 2nd monitor generally has private data that I do not displayed to the world on a website. Does anyone know if there is any kind of program or trick I can use that will make it appear that I have 1 monitor when a Screenshot is taken? I am not sure how the program does it and how that works as I am a web developer and not a C++ or any kind of low level programmer. If the Elance program simply runs the same function that is called when a PrintScreen key is pressed on a keyboard, then I am thinking it might be possible to maybe trick that into only the default desktop? Any ideas or help would be appreciated, thank you

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >