Search Results

Search found 11100 results on 444 pages for 'xt 20'.

Page 398/444 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• Rosewill RSV-S5 and it's transferespeeds

  - by DoomStone

  I have just bought a Rosewill RSV-S5, I have installed 5x1,5Tb Western Digital Green disks in it. After that have I created a Raid5 on them all with the software that followed with the hardware. Not the raid it self works fine, but it is SLOW, I can only obtain a maximum of 25 MB/s, and if SABnzbd+ is downloading with 5 MB/s is it having a hard time streaming a normal DIVX (700 mb) movie. Is this normal or is there something wrong? Edit: should be able to handle 3 Gbps = 384 megabytes / second Edit 2: As you can see am I only downloading with 3,76 MB/s and I'm trying to watch V s02e08 (720p), but it is completely unwatchable, as I can see 30 sec, and the it buffers for 20 sec. Edit: Other information there might be required I'm running Windows Server 2008 R2, optimized for program performance. Windows is installed on a 60GB SSD. I have a 50 Mb/s internet connection and a 1 Gb/s LAN, all connected with Cat6 Ethernet cables. The MCE is using a Gigabyte EP35C-DS3R motherboard with 2 GB DDR2 ram. Edit 3: I have used chunk sizes for 128 KB Edit 4: I found this on newegg Pros: Enclosure for 5x2TB hard drive is fine. This is basically a rebranded San Digital TR5M-B product. For support Rosewill tells you to contact San Digital. No direct support from Silicon Image for the computer raid card. Cons: Includes computer Silicon Image 3132 raid card, extremely slow raid 5 write (our tests ~10MB/s). Compare to regular internal local drive write 30-60MB/s. We basically dumped the Sil3132 card and replaced with High Point RocketRaid 622 card for extra $69.99. Note for RR622, turn off ECRC (end to end CRC check) for card to work on IBM xserver. What took 12hrs to copy now took 2-3hrs. San Digital realized the problem and has the newer model TR5M-BP TowerRaid Plus that comes with High Point RocketRaid 622 card. Rosewill should discontinue this product and go with TR5M-BP. Could not get Silicon Image raid management software to work with complicated 2008R2 server with 10 NICs, application doesn't know how to talk to localhost port with all those NICs. No updates from Silicon Image and support from San Digital ignored. Gave up on Sil3132 card. Save yourself from a lot of headaches, get the RR622 card too if you are going to buy this product. Other Thoughts: The newer model is TR5M-BP TowerRaid Plus, comes with High Point RocketRaid 622 raid card for the PC instead of Silicon Image Sil3132. According to San Digital, raid 5 performance for Sil3132 read 80MB/s write 19MB/s, and RR622 read 154MB/s write 149MB/s. Our RR622 tests gave (8TB raid 5) write ~80-110MB/s copying 40GB file took 8mins. So I have now ordered a HighPoint RocketRAID 622 2P ext SATA III and hopes that it will solve my problems.

  Read the article

• VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

  - by CAPitalZ

  I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

  Read the article

• How can I recover an ext4 filesystem corrupted after a fsck?

  - by Regan

  I have an ext4 filesystem on luks over software raid5. The filesystem was operating "just fine" for several years when I was beginning to run out of space. I had a 9T volume on 6x2T drives. I began upgrading to 3T drives by doing the mdadm fail, remove, add, rebuild, repeat process until I had a larger array. I then grew the luks container, and then when I unmounted and tried to resize2fs I was given the message the filesystem was dirty and needed e2fsck. Without thinking I just did e2fsck -y /dev/mapper/candybox and it began spewing all kinds of inode being removed type messages (can't remember exactly) I killed e2fsck and tried to remount the filesystem to backup data I was concerned about. When trying to mount at this point I get: # mount /dev/mapper/candybox /candybox mount: wrong fs type, bad option, bad superblock on /dev/mapper/candybox, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Looking back at my older logs I noticed the filesystem was giving this error each time the machine booted: kernel: [79137.275531] EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended So shame on me for not paying attention :( I then tried to mount using every backup superblock (one after another) and each attempt left this in my log: EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 0 failed (26534!=65440) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 1 failed (38021!=36729) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 2 failed (18336!=39845) ... EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 11911 failed (28743!=44098) BUG: soft lockup - CPU#0 stuck for 23s! [mount:2939] Attempts to restart e2fsck results in: # e2fsck /dev/mapper/candybox e2fsck 1.41.14 (22-Dec-2010) e2fsck: Group descriptors look bad... trying backup blocks... candy: recovering journal e2fsck: unable to set superblock flags on candy At this point, I decided it best to order some more drives and make an image using ddrescue Now two weeks later I have an image of the luks partition in a .img file. # ls -lh total 14T -rw-r--r-- 1 root root 14T Oct 25 01:57 candybox.img -rw-r--r-- 1 root root 271 Oct 20 14:32 candybox.logfile After numerous attempts using everything I could find online I could not coerce e2fsck to do anything on the image, so I used mkfs.ext4 -L candy candybox.img -m 0 -S and I was able to mount the dirty filesystem readonly without the journal and recover 960G of data. It gave all kinds of errors of various directories not existing and so forth but I was able to get some stuff. Which gave me some hope! I then ran e2fsck again and it had to recreate the root inode and gave a massive list of correcting group counts, I accepted the root inode creation and said no to everything else, leaving a completely empty filesystem. Re-ran again and said yes to all questions with the same result but now a "clean" but empty filesystem. extundelete gives me 0 recoverable inodes found. And now I'm stuck again, I can't come up with any other methods other than dropping to something like photorec which will give me an absolute mess with how large the filesystem was. I'm willing to re-copy the image from the original array and start over, if I can get any suggestions or ideas on a way to get more of my files back. I wish I could give more detailed logs of the commands that have run, but the output is long scrolled passed except for what gets logged to syslog and my memory is not as detailed due to the timeframe this has occurred over. Any help is greatly appreciated!

  Read the article

• Problem installing build-essential and upgrading g++ on Ubuntu 8.04

  - by ehsanul

  I'm having some trouble with dependencies it seems, but myself don't really know how to resolve the issue. Here's the output: ~:) sudo apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: build-essential: Depends: g++ (>= 4:4.3.1) but 4:4.2.3-1ubuntu6 is to be installed E: Broken packages ~:) sudo apt-get install g++ Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: g++-4.3 (>= 4.3.1-1) but it is not going to be installed Depends: gcc-4.3 (>= 4.3.1-1) but it is not installable E: Broken packages ~:) Edit: I just tried aptitude instead of apt-get, as suggested. Doesn't work, had other problems: ~:) sudo aptitude install build-essential [sudo] password for ehsanul: Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Building tag database... Done The following packages are BROKEN: g++ g++-4.3 libstdc++6-4.3-dev The following packages have been automatically kept back: dpkg-dev fakeroot libdns35 libisc35 linux-libc-dev patch The following NEW packages will be automatically installed: libgmp3c2 libmpfr1ldbl The following packages have been kept back: adobe-flashplugin bind9-host dnsutils gvfs gvfs-backends gvfs-fuse libatm1 libbind9-30 libgvfscommon0 libisccc30 libisccfg30 liblwres30 libnautilus-extension1 linux-headers-2.6.24-24 linux-headers-2.6.24-24-generic linux-image-2.6.24-24-generic nautilus nautilus-data The following NEW packages will be installed: libgmp3c2 libmpfr1ldbl The following packages will be upgraded: build-essential The following partially installed packages will be configured: timidity 2 packages upgraded, 4 newly installed, 0 to remove and 24 not upgraded. Need to get 775kB/6265kB of archives. After unpacking 20.3MB will be used. The following packages have unmet dependencies: libstdc++6-4.3-dev: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libstdc++6 (>= 4.3.2-1ubuntu11) but 4.2.4-1ubuntu4 is installed. g++-4.3: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: gcc-4.3 (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libc6 (>= 2.8~20080505) but 2.7-10ubuntu4 is installed. g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc-4.3 (>= 4.3.1-1) which is a virtual package. Resolving dependencies... The following actions will resolve these dependencies: Keep the following packages at their current version: build-essential [11.3ubuntu1 (hardy, now)] g++ [4:4.2.3-1ubuntu6 (hardy-updates, now)] g++-4.3 [Not Installed] libstdc++6-4.3-dev [Not Installed] Score is -9852 Accept this solution? [Y/n/q/?]

  Read the article

• Specifying a Postfix Instance to send outbound email

  - by Catherine Jefferson

  I have a CentOS 6.5 server running Postfix 2.6x (the default distribution) with five public IPv4 IPs bound to it. Each IP has DNS and rDNS set separately. Each uses a different hostname at a different domain. I have five Postfix instances, one bound to each IP, like this example: 192.168.34.104 red.example.com /etc/postfix 192.168.36.48 green.example.net /etc/postfix-green 192.168.36.49 pink.example.org /etc/postfix-pink 192.168.36.50 orange.example.info /etc/postfix-orange 192.168.36.51 blue.example.us /etc/postfix-blue I've tested each IP by telneting to port 25. Postfix answers and banners properly with the correct hostname. Email is received on all of these instances with no problems and is routed to the correct place. This setup, minus the final instance, has existed for a couple of years and works. I never bothered to set up outbound email to go through any but the main instance, however; there was no need. Now I need to send email from blue.example.us that actually leaves from that interface and IP, such that the Received headers show blue.example.us as the sending mailhost, so that SPF and DKIM validate, etc etc. The email that will be sent from blue.example.com is a feedback loop sent by a single shell account on the server (account5), an account that is dedicated to sending this email. The account receives the feedback loop emails from servers on other networks, saves the bodies of those emails, and then generates a new outbound email header, appends the saved body, and sends the email. It's sending by piping each email to sendmail -oi -t. We're doing it this way to mask the identities of the initial servers. The procmail script that processes these emails works correctly. However, I cannot configure this account to send email through the proper Postfix instance/IP/interface. The exact same account and script sends email through the main Postfix instance /etc/postfix without any issues. When I change MAIL_CONFIG to point to /etc/postfix-blue in either .bash_profile or the Procmail script that handles this email, though, I get this error: sendmail: fatal: User account5(###) is not allowed to submit mail I've read the manuals on Postfix.org, searched Google, and tried the suggestions in three previous answers here on ServerFault.com: Postfix - specify interface to deliver outbound mail on Postfix user is not allowed to submit mail Postfix rejects php mails I have been careful to stop and restart Postfix after each configuration change, and tested the results. Nothing has worked. The main postfix instance happily accepts outbound email from account5. The postfix-blue instance continues to reject email from account5 with the sendmail error above. As tempting as it is to blame machine hostility, I know that I must be missing something or doing something wrong. Does anybody have any suggestions as to what it might be? Please feel free to ask for further information about my setup if you need it. =-=-=-=-=-=-=-=-=-= At the request of the responder, here are main.cf and master.cf for a) the main postfix instance ("red.example.com") and b) the FBL instance ("blue.example.us") [NOTE: All parameters not specified below were left at the default Postfix 2.6 settings] MAIN: master.cf smtp inet n - n - - smtpd main.cf myhostname = red.example.com mydomain = example.com inet_interfaces = $myhostname, localhost inet_protocols = all lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname, localhost.$mydomain, localhost local_recipient_maps = mynetworks = 192.168.34.104/32 relay_domains = example.com, example.info, example.net, example.org, example.us relayhost = [192.168.34.102] # Separate physical server, main mailserver. relay_recipient_maps = hash:/etc/postfix/relay_recipients alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases smtpd_banner = $myhostname ESMTP $mail_name multi_instance_wrapper = ${command_directory}/postmulti -p -- multi_instance_enable = yes multi_instance_directories = /etc/postfix-green /etc/postfix-pink /etc/postfix-orange /etc/postfix-blue FBL: master.cf 184.173.119.103:25 inet n - n - - smtpd main.cf myhostname = blue.example.us mydomain = blue.example.us <= Deliberately set to subdomain only. myorigin = $mydomain inet_interfaces = $myhostname lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname local_recipient_maps = unix:passwd.byname $alias_maps $virtual_alias_maps mynetworks = 192.168.36.51/32, 192.168.35.20/31 <= Second IP is backup MX servers relay_domains = $mydestination recipient_canonical_maps = hash:/etc/postfix-blue/canonical virtual_alias_maps = hash:/etc/postfix-fbl/virtual alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical mailbox_command = /usr/bin/procmail -a "$EXTENSION" DEFAULT=$HOME/Mail/ MAILDIR=$HOME/Mail smtpd_banner = $myhostname ESMTP $mail_name authorized_submit_users = multi_instance_name = postfix-blue multi_instance_enable = yes

  Read the article

• Unable to make the session state request to the session state server.

  - by Angry_IT_Guru

  For about 4-5 months now, I seem to be having this sporadic issue--mainly during our busiest time of the day between 10:30-11:45AM, where all my Windows 2003 web servers in a Microsoft NLB cluster start throwing session state server errors. A sample error is below. System.Web.HttpException: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aspnet_state\Parameters\AllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name. at System.Web.SessionState.OutOfProcSessionStateStore.MakeRequest(StateProtocolVerb verb, String id, StateProtocolExclusive exclusiveAccess, Int32 extraFlags, Int32 timeout, Int32 lockCookie, Byte[] buf, Int32 cb, Int32 networkTimeout, SessionNDMakeRequestResults& results) at System.Web.SessionState.OutOfProcSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem) at System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Now I'm using ASP.NET State service on a centralized back-end Windows 2003 server that all servers communicate to. I was originally using SQL Server state for a couple years as well prior to having this issue. The problem with SQL wqas that when the issue occurred, it created a blocking situation which essentially impacted all users across all servers. The product company recommended that I use the standard ASP.NET State service as that was what they technically supported. Why this would make a difference is beyond me -- but I had no choice but to try it! I have attempted to create multiple application pools, adding additional servers, chaning TCP/IP timeout from 20 to 30 seconds, and even calling Microsoft ASP.NET product support, with very little success. I even recommended that they review whether they are using read-only session state instead of read/write per page request -- as I understand that this basically causes every page to make round-trips to state server even if state isn't being used on the page. Unfortunately, the application is developed by our product company and they insist that it is something with my environment because other clients do not have these sort of issues. However, I've talked to other clients and they tell me when they've seen issues like they, they've basically had to create another web farm. This issue almost seems like I've simply reached some architectural limit within the application... Microsoft's position on the issue is that the session state needs to be reduced and the returncode being reported back from the state server indicates buffers are full. To better understand the scope of issues (rather than wait for customers to call and complain), I installed ELMAH and configured it to send me e-mails when unhandled exceptions occur. I basically get 500-1000 e-mails during the time period of high activity! If any one has any other ideas I could try or better ways to troubleshoot, I'd appreciate it.

  Read the article

• MySQL reserves too much RAM

  - by Buddy

  I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

  Read the article

• Static file download from browser breaking in varnish but works fine in Apache

  - by Ron

  I would at first like to thank everyone at serverfault for this great website and I also come to this site while searching in google for various server related issues and setups. I also have an issue today and so I am posting here and hope that the seniors would help me out. I had setup a website on a dedicated server a few days ago and I used Varnish 3 as the frontend to Apache2 on a Debian Lenny server as the traffic was a bit high. There are several static file downloads of around 10-20 MB in size in the website. The website looked fine in the last few days after I setup. I was checking from a 5mbps + broadband connection and the file downloads were also completed in seconds and working fine. But today I realized that on a slow internet connection the file downloads were breaking off. When I tried to download the files from the website using a browser then it broke off after a minute or so. It kept on happening again and again and so it had nothing to do with the internet connection. The internet connection was around 512 kbps and so it was not dial up level speed too but decent speed where files should easily download though not that fast. Then I thought of trying out with the apache backend port and used the port number to check out if the problem occurs. But then on adding the apache port in the static file download url, the files got downloaded easily and did not break even once. I tried it several times to make sure that it was not a coincidence but every time I was using the apache port in the file download url then it was downloading fine while it was breaking each time with the normal link which was routed through Varnish I suppose. So, it seems Varnish has somehow resulted in the broken file downloads. Could anyone give any idea as to why it is happening and how to fix the problem. For more clarification, take this example: Apache backend set on port 8008, Varnish frontend set on port 80 Now when I download say http://mywebsite.com/directory/filename.extension Then the download breaks off after a minute or so. I cannot be sure it is due to the time or size though and I am just assuming. May be some other reason too. But when I download using: http://mywebsite.com:8008/directory/filename.extension Then the file download does not break at all and it gets download fine. So, it seems that varnish is somehow creating the file download breaking and not apache. Does anybody have any idea as to why it is happening and how can it be fixed. Any help would be highly appreciated. And my varnish default.vcl is backend apache { set backend.host = "127.0.0.1"; set backend.port = "8008"; } sub vcl_deliver { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Server; remove resp.http.X-Powered-By; }

  Read the article

• dns server bind is not work [closed]

  - by user1742080

  I just installed bind on RHEL 6 and point a domain to that server. but actually when i ping domain it returns error 1214: Here is my named.conf: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { any; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; zone "mydomain.com"{ type master; file "/var/named/data/named.mydomain.com"; allow-update { none; }; }; AND The content of "/var/named/data/named.mydomain.com": 1 $TTL 38400 2 3 mydomain.com. IN SOA ns1.mydomain.com. milad.yahoo.com. ( 4 2012101201 ; serial number YYMMDDNN 5 28800 ; Refresh 6 7200 ; Retry 7 864000 ; Expire 8 38400 ; Min TTL 9 ) 10 11 mydomain.com. IN A 1.2.3.4 12 www IN A 1.2.3.4 13 ns1.mydomain.com. IN A 1.2.3.4 14 ns2.mydomain.com. IN A 1.2.3.4 15 mydomain.com. IN NS ns1.mydomain.com. 16 mydomain.com. IN NS ns2.mydomain.com. AND i'm sure the named service is running: [root@server ~]# service named status version: 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.3 CPUs found: 8 worker threads: 8 number of zones: 20 debug level: 0 xfers running: 0 xfers deferred: 0 soa queries in progress: 0 query logging is OFF recursive clients: 0/0/1000 tcp clients: 0/100 server is up and running named (pid 26299) is running...

  Read the article

• How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

  - by cagenut

  Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

  Read the article

• RedHat 5.5 server does not show per processor memory utilization

  - by Mike S

  I have been searching all over internet but not finding any leads. I have a system with a memory leak that I am trying to troubleshoot. Unfortunately I am not able to see per processor memory utilization. Here are the outputs of TOP and PS commands. Linux SERVER_NAME 2.6.18-194.8.1.el5 #1 SMP Wed Jun 23 10:52:51 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux top - 09:17:13 up 18:43, 3 users, load average: 0.00, 0.00, 0.00 Tasks: 375 total, 1 running, 373 sleeping, 0 stopped, 1 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32922828k total, 32776712k used, 146116k free, 267128k buffers Swap: 5245212k total, 0k used, 5245212k free, 32141044k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 10348 744 620 S 0.0 0.0 0:05.65 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.05 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 % ps -auxf | sort -nr -k 4 | head -10 Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.7/FAQ xfs 6205 0.0 0.0 23316 3892 ? Ss Aug19 0:00 xfs -droppriv -daemon uuidd 6101 0.0 0.0 60976 224 ? Ss Aug19 0:00 /usr/sbin/uuidd USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND smmsp 6130 0.0 0.0 57900 1784 ? Ss Aug19 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue rpc 5126 0.0 0.0 8052 632 ? Ss Aug19 0:00 portmap root 99 0.0 0.0 0 0 ? S< Aug19 0:00 [events/1] root 98 0.0 0.0 0 0 ? S< Aug19 0:00 [events/0] root 97 0.0 0.0 0 0 ? S< Aug19 0:00 [watchdog/31] root 96 0.0 0.0 0 0 ? SN Aug19 0:00 [ksoftirqd/31] root 95 0.0 0.0 0 0 ? S< Aug19 0:00 [migration/31] Any help with this is appretiate.

  Read the article

• "ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver" wheel-click is wrong

  - by sputnick

  I use this mouse under archlinux x86_64 with 3.2.8-1-ARCH kernel. I have some problems to select and then paste with the wheel-click in some applications like konversation, not in a terminal nor an editor. I don't know if it's a hardware problem or a software one. $ lsusb -v Bus 002 Device 110: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc50e Cordless Mouse Receiver bcdDevice 25.10 iManufacturer 1 Logitech iProduct 2 USB RECEIVER iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 70mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 95 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) When I see what's happens in xev, the output is different compared to another mouse My buggy Logitech mouse : ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350700, (48,52), root:(1491,75), state 0x10, button 11, same_screen YES EnterNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170350700, (48,52), root:(1491,75), mode NotifyGrab, detail NotifyInferior, same_screen YES, focus YES, state 16 KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350716, (48,52), root:(1491,75), state 0x10, button 6, same_screen YES ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350716, (48,52), root:(1491,75), state 0x10, button 6, same_screen YES ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350988, (48,52), root:(1491,75), state 0x10, button 11, same_screen YES LeaveNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170350988, (48,52), root:(1491,75), mode NotifyUngrab, detail NotifyInferior, same_screen YES, focus YES, state 16 a working mouse (dell) : ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170245131, (46,32), root:(1489,55), state 0x10, button 2, same_screen YES EnterNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170245131, (46,32), root:(1489,55), mode NotifyGrab, detail NotifyInferior, same_screen YES, focus YES, state 528 KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170245411, (46,32), root:(1489,55), state 0x210, button 2, same_screen YES LeaveNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170245411, (46,32), root:(1489,55), mode NotifyUngrab, detail NotifyInferior, same_screen YES, focus YES, state 16 A demo of the problem when I use konversation (IRC) : http://www.youtube.com/watch?v=lhmr92M7NCc I tried to modify the button map with xmodmap like this with no success (one at a time) : xmodmap -e "pointer = 1 0 3" xmodmap -e "pointer = 1 1 3" xmodmap -e "pointer = 1 2 3" xmodmap -e "pointer = 1 3 3" xmodmap -e "pointer = 1 4 3" xmodmap -e "pointer = 1 5 3" xmodmap -e "pointer = 1 6 3" xmodmap -e "pointer = 1 7 3" xmodmap -e "pointer = 1 8 3" xmodmap -e "pointer = 1 9 3" xmodmap -e "pointer = 1 10 3" xmodmap -e "pointer = 1 11 3" xmodmap -e "pointer = 1 12 3" xmodmap -e "pointer = 1 13 3" xmodmap -e "pointer = 1 14 3" xmodmap -e "pointer = 1 15 3" xmodmap -e "pointer = 1 16 3" xmodmap -e "pointer = 1 17 3" xmodmap -e "pointer = 1 18 3" xmodmap -e "pointer = 1 19 3" xmodmap -e "pointer = 1 20 3" xmodmap -e "pointer = 1 21 3" xmodmap -e "pointer = 1 22 3" xmodmap -e "pointer = 1 23 3" xmodmap -e "pointer = 1 24 3" xmodmap -e "pointer = 1 25 3" Any clue ? I would like to avoid buying a new mouse just for a paste problem.

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• Hosed Windows 7 permissons

  - by Anthony

  Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

  Read the article

• Set source address to use tun device does not work (Debian Squeeze)

  - by A. Donda

  there have been similar questions on StackExchange but none of the answers helped me, so I'll try a question of my own. I have a VPN connection via OpenVPN. By default, all traffic is redirected through the tunnel using OpenVPN's "two more specific routes" trick, but I disabled that. My routing table is like this: 198.144.156.141 192.168.2.1 255.255.255.255 UGH 0 0 0 eth0 10.30.92.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun1 10.30.92.1 10.30.92.5 255.255.255.255 UGH 0 0 0 tun1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.30.92.5 0.0.0.0 UG 0 0 0 tun1 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0 And the interface configuration is like this: # ifconfig eth0 Link encap:Ethernet HWaddr XX-XX- inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fe8d:acbd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:394869 errors:0 dropped:0 overruns:0 frame:0 TX packets:293489 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:388519578 (370.5 MiB) TX bytes:148817487 (141.9 MiB) Interrupt:20 Base address:0x6f00 tun1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.30.92.6 P-t-P:10.30.92.5 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:9885 (9.6 KiB) TX bytes:4380 (4.2 KiB) plus the lo device. The routing table has two default routes, one via eth0 through my local network router (DSL modem) at 192.168.2.1, and another via tun1 through the VPN's gateway. With this configuration, if I connect to a site, the route chosen is the direct one (because it has less hops?): # traceroute 8.8.8.8 -n traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.2.1 0.427 ms 0.491 ms 0.610 ms 2 213.191.89.13 17.981 ms 20.137 ms 22.141 ms 3 62.109.108.48 23.681 ms 25.009 ms 26.401 ms ... This is fine, because my goal is to send only traffic from specific applications through the tunnel (esp. transmission, using its -i / bind-address-ipv4 option). To test whether this can work at all, I check it first with traceroute's -s option: # traceroute 8.8.8.8 -n -s 10.30.92.6 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 * * * 2 * * * 3 * * * ... This I take to mean that connection using the tunnel's local address as source is not possible. What is possible (though only as root) is to specify the source interface: # traceroute 8.8.8.8 -n -i tun1 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 10.30.92.1 129.337 ms 297.758 ms 297.725 ms 2 * * * 3 198.144.152.17 297.653 ms 297.652 ms 297.650 ms ... So apparently the tun1 interface is working and it is possible to send packets through it. But selecting the source interface is not implemented in my actual target application (transmission), so I would like to get source address selection to work. What am I doing wrong?

  Read the article

• mySQL Optimization Suggestions

  - by Brian Schroeter

  I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

  Read the article

• Lockdown users on Windows Server 2012

  - by el.severo

  I set up a Active Directory on a server machine with Windows Server 2012 and I'd like to create some users with limitations like Windows Steady State does in Windows XP (locally). Seen already the Windows SteadyState Handbook (with Windows Server 2008), but I'd like to know if anyone has tried this before, the limitations are the following: 1. Prevent locked or roaming user profiles that cannot be found on the computer from logging on 2. Do not cache copies of locked or roaming user profiles for users who have previously logged on to this computer 3. Do not allow Windows to compute and store passwords using LAN Manager Hash values 4. Do not store usernames or passwords used to log on to the Windows Live ID or the domain 5. Prevent users from creating folders and files on drive C:\ 6. Lock profile to prevent the user from making permanent changes 7. Remove the Control Panel, Printer and Network Settings from the Classic Start menu 8. Remove the Favorites icon 9. Remove the My Network Places icon 10. Remove the Frequently Used Program list 11. Remove the Shared documents folder from My Computer 12. Remove control Panel icon 13. Remove the Set Program Access and Defaults icon 14. Remove the Network Connection(Connect To)icon 15. Remove the Printers and Faxes icon 16. Remove the Run icon 17. Prevent access to Windows Explorer features: Folder Options, Customize Toolbar, and the Notification Area 18. Prevent access to the taskbar 19. Prevent access to the command prompt 20. Prevent access to the registry editor 21. Prevent access to the Task Manager 22. Prevent access to Microsoft Management Console utilities 23. Prevent users from adding or removing printers 24. Prevent users from locking the computer 25. Prevent password changes (also requires the Control Panel icon to be removed) 26. Disable System Tools and other management programs 27. Prevent users from saving files to the desktop 28. Hide A Drive 29. Hide B Drive 30. Hide C Drive 31. Prevent changes to Internet Explorer registry settings 32. Empty the Temporary Internet Files folder when Internet Explorer is closed 33. Remove Internet Options 34. Remove General tab in Internet Options 35. Remove Security tab in Internet Options 36. Remove Privacy tab in Internet Options 37. Remove Content tab in Internet Options 38. Remove Connections tab in Internet Options 39. Remove Programs tab in Internet Options 40. Remove Advanced tab in Internet Options 41. Set a home page (Internet Explorer) 42. Restrict the possibility to change desktop image 43. Restrict the possibility to change wallpaper 44. Restrict usb flash drives Any suggestions for this? UPDATE: As @Dan suggested me I'd like to specify that would be applied to a educational scenario where students can login from a computer and want to add some restrictions to them.

  Read the article

• How do bots access directories on a server that are not DocumentRoot of public IP address? How do I stop them?

  - by tmsimont

  I have a local network set up with apache2 and "named" running on OpenSuse 13.1 Linux. I used the "named" service to use my computer as a domain server. I set up my router to point to ask my computer for domain lookups, so I have a chance to have it rewrite a bunch of domains on my network to its own local IP, 192.168.0.111 This works great. I use virtual host configuration to allow various domains and subdomains (re-routed to the same IP via named) to pull up different directories in my computer. For example: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias fmb.wa.net DocumentRoot /home/work/wa.net/fmb </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias postrecord.wa.net DocumentRoot /home/work/wa.net/postrecord </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias cvalley.wa.net DocumentRoot /home/work/wa.net/cvalley_local </VirtualHost> This makes it possible for me to hit cvalley.wa.net from any device in my network and get the site that lives in /home/work/wa.net/cvalley_local I decided to forward port 80 to this computer, so I could share a few development sites with coworkers. I can't control which site they see with the same named service, because they'd have to use my computer as their domain name server... So I added a line like this: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias MY.IP.XXX.XX DocumentRoot /home/work/wa.net/cvalley </VirtualHost> Where "MY.IP.XXX.XX" is my public IP address. This works as expected, when you hit my IP address from a public network you see the site that lives in /home/work/wa.net/cvalley. The point of confusion that I have is that there are public IP addresses in my logs in other sites. I would have expected it to be impossible to access other sites in my network, unless the public user somehow figured out what I'm calling my ServerAliases, and is mimicing my domain set up... How can public traffic be hitting my other local sites? How can I recreate this kind of access? Here are some examples of public IP's hitting my VirtualHost sites: 162.253.66.76 - - [15/Aug/2014:19:20:47 -0600] "GET /xmlrpc.php HTTP/1.0" 404 1004 "-" "-" 162.253.66.74 - - [16/Aug/2014:10:50:28 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 185.4.227.194 - - [16/Aug/2014:11:16:45 -0600] "GET http://24x7-allrequestsallowed.com/?PHPSESSID=1rysxtj500143WQMVT%5E_NAZ%5BQ HTTP/1.1" 200 262 "-" "-" 101.226.254.138 - - [16/Aug/2014:13:32:14 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 162.253.66.74 - - [16/Aug/2014:14:26:19 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 212.129.2.119 - - [16/Aug/2014:16:00:51 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 91.240.163.111 - - [16/Aug/2014:18:34:32 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 162.253.66.74 - - [16/Aug/2014:19:02:53 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 122.226.223.69 - - [17/Aug/2014:05:53:09 -0600] "GET http://www.k2proxy.com//hello.html HTTP/1.1" 404 1006 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E)" ::1 - - [17/Aug/2014:10:19:26 -0600] "OPTIONS * HTTP/1.0" 200 - "-" "Apache/2.4.6 (Linux/SUSE) OpenSSL/1.0.1e PHP/5.4.20 (internal dummy connection)" 162.209.65.196 - - [17/Aug/2014:15:31:53 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 111.206.199.163 - - [18/Aug/2014:11:12:56 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 37.187.180.168 - - [18/Aug/2014:15:40:00 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 62.210.38.226 - - [18/Aug/2014:18:35:16 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" Is there anything that I can do to reliably deny public access by default, but allow it only in one VirtualHost?

  Read the article

• BIND no longer responds to AXFR Requests

  - by djsumdog

  Recently we moved our primary external DNS server. It has three caching DNS slaves in front of it provided by our ISP. They've told us they've started getting access denied requests when doing zone transfers (AXFR). If I add in my own IPs to the allow-transfer list, I also get a transfer failed when using dig with the AXFR argument. Here is what my bind configuration looks like: options { directory "/var/lib/named"; dump-file "/var/log/named_dump.db"; zone-statistics yes; statistics-file "/var/log/named.stats"; listen-on-v6 { any; }; notify-source 10.19.0.68 port 53; querylog yes; notify yes; allow-transfer { 127.0.0.1; //localhost 1.1.1.1; //public dns slave 1 2.2.2.2; //public dns slave 2 3.3.3.3; //public dns slave 3 }; also-notify { 1.1.1.1; //public dns slave 1 2.2.2.2; //public dns slave 2 3.3.3.3; //public dns slave 3 }; include "/etc/named.d/forwarders.conf"; }; logging { channel simple_log { file "/var/log/bind.log" versions 10 size 3m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ simple_log; }; channel log_zone_transfers { file "/var/log/axfr.log" versions 10 size 3m; print-time yes; print-category yes; print-severity yes; }; category xfer-out { log_zone_transfers; }; channel log_notify { file "/var/log/notify.log" versions 10 size 3m; print-time yes; print-category yes; print-severity yes; }; category notify { log_notify; }; channel queries { file "/var/log/queries.log" versions 10 size 30m; print-time yes; severity info; print-category yes; print-severity yes; }; category queries { queries; }; }; zone "." in { type hint; file "root.hint"; }; zone "localhost" in { type master; file "localhost.zone"; }; zone "0.0.127.in-addr.arpa" in { type master; file "127.0.0.zone"; }; include "/etc/named.conf.include"; zone "example.net " { type master; file "/var/lib/named/master/example.net.hosts"; }; zone "example.com " { type master; file "/var/lib/named/master/example.com.hosts"; }; ## -- other master files -- And the errors in the xfer log look like the following: 29-Oct-2012 14:20:02.806 xfer-out: info: client 1.1.1.1#59069: bad zone transfer request: 'example.com./IN': non-authoritative zone (NOTAUTH) I've tried adding allow-transfer parameters directly on the zone files and still get failed transfers. Any idea what I'm doing wrong?

  Read the article

• Windows 8 Stuck on Start Screen File Search

  - by baturayd

  I have been searching someone else having the same issue but I couldn't find any. Here is my problem: I'm using Windows 8 Pro with Media Center. File search screen does not close itself after I make a file search within start screen. It stuck on that screen. I can't go back to desktop, therefore, task manager is inaccessible. Only way to get out of it is to sign out. It also looks like non-operational. It doesn't give me any result at all. It's just a blank screen with "Files" title. It used to work perfectly. Things I have done before coming here: Safe mode minimal boot to ensure no other 3rd party software interferes. sfc haven't found any inconsistencies. Search index has been rebuild. Normal boot with all 3rd party services and start-up items disabled. System restore to a date that I know this feature was functional. And by the way, I have installed all updates released so far. I strongly used file search via start menu back in Windows 7. This is an absolute game changer for me. I'm curious what causes this. I'll do a "system refresh" if I can't fix this. I'm working on it, I'll keep this thread updated should I find any fix. First update: I just discovered that file search screen gets stuck if it's invoked by typing query directly in start screen. It doesn't get stuck if it's invoked from win + x menu. I was able to "escape" from stuck screen with invoking it again by win + x menu. After rebuilding search index again, search suggestions started to appear again but still there is no file search functionality. Second update: "Results for" expression appears only for a second near to "Files" title when search is initialized. Third update: As a last resort, I finally tried to do a "System Refresh" which has also failed to refresh by giving an error after waiting almost 20 minutes at 99%. (Seriously?) After cold boot it began to undo changes. After changes were reverted, I boot the machine without doing anything further and bingo! Search began acting normal again. This is a totally weird solution. It obviously fixed certain system files during failed refresh, and kept those changes untouched because they were supposed to be that way at the first place. I'll keep this thread alive should anyone comes with a more logical explanation. Forth update: After a windows update, search functionality again stopped responding. It happened after a system update for the first time. Now I have a pretty good suspicion about system update, though I have no solid proof of its involvement with this problem.

  Read the article

• Using jQuery and SPServices to Display List Items

  - by Bil Simser

  I had an interesting challenge recently that I turned to Marc Anderson’s wonderful SPServices project for. If you haven’t already seen or used SPServices, please do. It’s a jQuery library that does primarily two things. First, it wraps up all of the SharePoint web services in a nice little AJAX wrapper for use in JavaScript. Second, it enhances the form editing of items in SharePoint so you’re not hacking up your List Form pages. My challenge was simple but interesting. The user wanted to display a SharePoint item page (DispForm.aspx, which already had some customization on it to display related items via this blog post from Codeless Solutions for SharePoint) but launch from an external application using the value of one of the fields in the SharePoint list. For simplicity let’s say my list is a list of customers and the related list is a list of orders for that customer. It would look something like this (click on the item to see the full image): Your first thought might be, that’s easy! Display the customer information using a DataView Web Part and filter the item using a query string to match the customer number. However there are a few problems with this idea: You’ll need to build a custom page and then attach that related orders view to it. This is a bit of a problem because the solution from Codeless Solutions relies on the Title field on the page to be displayed. On a custom page you would have to recreate all of the elements found on the DispForm.aspx page so the related view would work. The DataView Web Part doesn’t look *exactly* like what the out of the box display form page does. Not a huge problem and can be overcome with some CSS style overrides but still, more work. A DVWP showing a single record doesn’t have the same toolbar that you would using the DispForm.aspx. Not a show-stopper and you can rebuild the toolbar but it’s going to potentially require code and then there’s the security trimming, etc. that you have to get right. DVWPs are not automatically updated if you add a column to the list like DispForm.aspx is. Work, work, work. For these reasons I thought it would be easier to take the already existing (modified) DispForm.aspx page and just add some jQuery magic to the page to find the item. Why do we need to find it? DispForm.aspx relies on a querystring parameter called “ID” which then displays whatever that item ID number is in the list. Trouble is, when you’re coming in from an external app via a link, you don’t know what that internal ID is (and frankly shouldn’t). I don’t like exposing internal SharePoint IDs to the outside world for the same reason I don’t do it with database IDs. They’re internal and while it’s find to use on the site itself you don’t want external links using it. It’s volatile and can change (delete one item then re-add it back with the same data and watch any ID references break). The next thought might be to call a SharePoint web service with a CAML query to get the item ID number using some criteria (in this case, the customer number). That’s great if you have that ability but again we had an existing application we were just adding a link to. The last thing I wanted to do was to crack open the code on that sucker and start calling web services (primarily because it’s Java, but really I’m a lazy geek). However if you’re doing this and have access to call a web service that would be an option. Back to this problem, how do I a) find a SharePoint List Item based on some field value other than ID and b) make it low impact so I can just construct a URL to it? That’s where jQuery and SPServices came to the rescue. After spending a few hours of emails back and forth with Marc and a couple of phone calls (and updating jQuery to the latest version, duh!) it was a simple answer. First we need a reference to a) jQuery b) SPServices and c) our script. I just dropped a Content Editor Web Part, the Swiss Army Knives of Web Parts, onto the DispForm.aspx page and added these lines: <script type="text/javascript" src="http://intranet/JavaScript/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://intranet/JavaScript/jquery.SPServices-0.5.3.min.js"></script> <script type="text/javascript" src="http://intranet/JavaScript/RedirectToID.js"> </script> Update it to point to where you keep your scripts located. I prefer to keep them all in Document Libraries as I can make changes to them without having to remote into the server (and on a multiple web front end, that’s just a PITA), it provides me with version control of sorts, and it’s quick to add new plugins and scripts. Now we can look at our RedirectToID.js script. This invokes the SPServices Library to call the GetListItems method of the Lists web service and then rewrites the URL to DispForm.aspx to use the correct SharePoint ID (the internal one). $(document).ready(function(){ var queryStringValues = $().SPServices.SPGetQueryString(); var id = queryStringValues["ID"]; if(id == "0") { var customer = queryStringValues["CustomerNumber"]; var query = "<Query><Where><Eq><FieldRef Name='CustomerNumber'/><Value Type='Text'>" + customer + "</Value></Eq></Where></Query>"; var url = window.location; $().SPServices({ operation: "GetListItems", listName: "Customers", async: false, CAMLQuery: query, completefunc: function (xData, Status) { $(xData.responseXML).find("[nodeName=z:row]").each(function(){ id = $(this).attr("ows_ID"); url = $().SPServices.SPGetCurrentSite() + "/Lists/Customers/DispForm.aspx?ID=" + id; window.location = url; }); } }); } }); What’s happening here? Line 3: We call SPServices.SPGetQueryString to get an array of query string values (a handy function in the library as I had 15 lines of code to do this which is now gone). Line 4: Extract the ID value from the query string Line 6: If we pass in “0” it means we’re looking up a field value. This allows DispForm.aspx to work like normal with SharePoint lists but lookup our values when invoked. Why ID at all? DispForm.aspx doesn’t work unless you pass in something and “0” is a *magic* number that will invoke the page but not lookup a value in the database. Line 8-15: Extract the CustomerNumber query string value, build a CAML query to find it then call the GetListitems method using SPServices Line 16: Process the results in our completefunc to iterate over all the rows (there should only be one) and extract the real ID of the item Line 17-20: Build a new URL based on the site (using a call to SPGetCurrentSite) and append our real ID to redirect to the DispForm.aspx page As you can see, it dynamically creates a CAML query for the call to the web service using the passed in value. You could even make this generic to take in different query strings, one for the field name to search for and the other for the value to find. That way it could be used for any field you want. For example you could bring up the correct item on the DispForm.aspx page based on customer name with something like this: http://myserver/Lists/Customers/DispForm.aspx?ID=0&FilterId=CustomerName&FilterValue=Sony Use your imagination. Some people would opt for building a custom page with a DVWP but if you want to leverage all the functionality of DispForm.aspx this might come in handy if you don’t want to rely on internal SharePoint IDs.

  Read the article

• Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

  - by Asian Angel

  This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• Week in Geek: New Security Flaw Confirmed for Internet Explorer Edition

  - by Asian Angel

  This week we learned how to use a PC to stay entertained while traveling for the holidays, create quality photo prints with free software, share links between any browser and any smartphone, create perfect Christmas photos using How-To Geek’s 10 best how-to photo guides, and had fun decorating Firefox with a collection of Holiday 2010 Personas themes. Photo by Repoort. Random Geek Links Photo by Asian Angel. Critical 0-Day Flaw Affects All Internet Explorer Versions, Microsoft Warns Microsoft has confirmed a zero-day vulnerability affecting all supported versions of Internet Explorer, including IE8, IE7 and IE6. Note: Article contains link to Microsoft Security Advisory detailing two work-arounds until a security update is released. Hackers targeting human rights, indie media groups Hackers are increasingly hitting the Web sites of human rights and independent media groups in an attempt to silence them, says a new study released this week by Harvard University’s Berkman Center for Internet & Society. OpenBSD: audits give no indication of back doors So far, the analyses of OpenBSD’s crypto and IPSec code have not provided any indication that the system contains back doors for listening to encrypted VPN connections. But the developers have already found two bugs during their current audits. Sophos: Beware Facebook’s new facial-recognition feature Facebook’s new facial recognition software might result in undesirable photos of users being circulated online, warned a security expert, who urged users to keep abreast with the social network’s privacy settings to prevent the abovementioned scenario from becoming a reality. Microsoft withdraws flawed Outlook update Microsoft has withdrawn update KB2412171 for Outlook 2007, released last Patch Tuesday, after a number of user complaints. Skype: Millions still without service Skype was still working to right itself going into the holiday weekend from a major outage that began this past Wednesday. Mozilla improves sync setup and WebGL in Firefox 4 beta 8 Firefox 4.0 beta 8 brings better support for WebGL and introduces an improved setup process for Firefox Sync that simplifies the steps for configuring the synchronization service across multiple devices. Chrome OS the litmus test for cloud The success or failure of Google’s browser-oriented Chrome OS will be the litmus test to decide if the cloud is capable of addressing user needs for content and services, according to a new Ovum report released Monday. FCC Net neutrality rules reach mobile apps The Federal Communications Commission (FCC) finally released its long-expected regulations on Thursday and the related explanations total a whopping 194 pages. One new item that was not previously disclosed: mobile wireless providers can’t block “applications that compete with the provider’s” own voice or video telephony services. KDE and the Document Foundation join Open Invention Network The KDE e.V. and the Document Foundation (TDF) have both joined the Open Invention Network (OIN) as licensees, expanding the organization’s roster of supporters. Report: SEC looks into Hurd’s ousting from HP The scandal surrounding Mark Hurd’s departure from the world’s largest technology company in August has officially drawn attention from the U.S. Securities and Exchange Commission. Report: Google requests delay of new Google TVs Google TV is apparently encountering a bit of static that has resulted in a programming change. Geek Video of the Week This week we have a double dose of geeky video goodness for you with the original Mac vs PC video and the trailer for the sequel. Photo courtesy of Peacer. Mac vs PC Photo courtesy of Peacer. Mac vs PC 2 Trailer Random TinyHacker Links Awesome Tools To Extract Audio From Video Here’s a list of really useful, and free tools to rip audio from videos. Getting Your iPhone Out of Recovery Mode Is your iPhone stuck in recovery mode? This tutorial will help you get it out of that state. Google Shared Spaces Quickly create a shared space and collaborate with friends online. McAfee Internet Security 2011 – Upgrade not worthy of a version change McAfee has released their 2011 version of security products. And as this review details, the upgrades are minimal when compared to their 2010 products. For more information, check out the review. 200 Countries Plotted Hans Rosling’s famous lectures combine enormous quantities of public data with a sport’s commentator’s style to reveal the story of the world’s past, present and future development. Now he explores stats in a way he has never done before – using augmented reality animation. Super User Questions Enjoy looking through this week’s batch of popular questions and answers from Super User. How to restore windows 7 to a known working state every time it boots? Is there an easy way to mass-transfer all files between two computers? Coffee spilled inside computer, damaged hard drive Computer does not boot after ram upgrade Keyboard not detected when trying to install Ubuntu 10.10 How-To Geek Weekly Article Recap Have you had a super busy week while preparing for the holiday weekend? Then here is your chance to get caught up on your reading with our five hottest articles for the week. Ask How-To Geek: Rescuing an Infected PC, Installing Bloat-free iTunes, and Taming a Crazy Trackpad How to Use the Avira Rescue CD to Clean Your Infected PC Eight Geektacular Christmas Projects for Your Day Off VirtualBox 4.0 Rocks Extensions and a Simplified GUI Ask the Readers: How Many Monitors Do You Use with Your Computer? One Year Ago on How-To Geek Here are more great articles from one year ago for you to read and enjoy during the holiday break. Enjoy Distraction-Free Writing with WriteMonkey Shutter is a State of Art Screenshot Tool for Ubuntu Get Hex & RGB Color Codes the Easy Way Find User Scripts for Your Favorite Websites the Easy Way Access Your Unsorted Bookmarks the Easy Way (Firefox) The Geek Note That “wraps” things up for this week and we hope that everyone enjoys the rest of their holiday break! Found a great tip during the break? Then be sure to send it in to us at [email protected]. Photo by ArSiSa7. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Simon’s Cat Explores the Christmas Tree! [Video] The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video]

  Read the article

• Silverlight 4 Tools for VS 2010 and WCF RIA Services Released

  - by ScottGu

  The final release of the Silverlight 4 Tools for Visual Studio 2010 and WCF RIA Services is now available for download.  Download and Install If you already have Visual Studio 2010 installed (or the free Visual Web Developer 2010 Express), then you can install both the Silverlight 4 Tooling Support as well as WCF RIA Services support by downloading and running this setup package (note: please make sure to uninstall the preview release of the Silverlight 4 Tools for VS 2010 if you have previously installed that).  The Silverlight 4 Tools for VS 2010 package extends the Silverlight support built into Visual Studio 2010 and enables support for Silverlight 4 applications as well.  It also installs WCF RIA Services application templates and libraries: Today’s release includes the English edition of the Silverlight 4 Tooling – localized versions will be available next month for other Visual Studio languages as well. Silverlight Tooling Support Visual Studio 2010 includes rich tooling support for building Silverlight and WPF applications. It includes a WYSIWYG designer surface that enables you to easily use controls to construct UI – including the ability to take advantage of layout containers, and apply styles and resources: The VS 2010 designer enables you to leverage the rich data binding support within Silverlight and WPF, and easily wire-up bindings on controls.  The Data Sources window within Silverlight projects can be used to reference POCO objects (plain old CLR objects), WCF Services, WCF RIA Services client proxies or SharePoint Lists.  For example, let’s assume we add a “Person” class like below to our project: We could then add it to the Data Source window which will cause it to show up like below in the IDE: We can optionally customize the default UI control types that are associated for each property on the object.  For example, below we’ll default the BirthDate property to be represented by a “DatePicker” control: And then when we drag/drop the Person type from the Data Sources onto the design-surface it will automatically create UI controls that are bound to the properties of our Person class: VS 2010 allows you to optionally customize each UI binding further by selecting a control, and then right-click on any of its properties within the property-grid and pull up the “Apply Bindings” dialog: This will bring up a floating data-binding dialog that enables you to easily configure things like the binding path on the data source object, specify a format convertor, specify string-format settings, specify how validation errors should be handled, etc: In addition to providing WYSIWYG designer support for WPF and Silverlight applications, VS 2010 also provides rich XAML intellisense and code editing support – enabling a rich source editing environment. Silverlight 4 Tool Enhancements Today’s Silverlight 4 Tooling Release for VS 2010 includes a bunch of nice new features.  These include: Support for Silverlight Out of Browser Applications and Elevated Trust Applications You can open up a Silverlight application’s project properties window and click the “Enable Running Application Out of Browser” checkbox to enable you to install an offline, out of browser, version of your Silverlight 4 application.  You can then customize a number of “out of browser” settings of your application within Visual Studio: Notice above how you can now indicate that you want to run with elevated trust, with hardware graphics acceleration, as well as customize things like the Window style of the application (allowing you to build a nice polished window style for consumer applications). Support for Implicit Styles and “Go to Value Definition” Support: Silverlight 4 now allows you to define “implicit styles” for your applications.  This allows you to style controls by type (for example: have a default look for all buttons) and avoid you having to explicitly reference styles from each control.  In addition to honoring implicit styles on the designer-surface, VS 2010 also now allows you to right click on any control (or on one of it properties) and choose the “Go to Value Definition…” context menu to jump to the XAML where the style is defined, and from there you can easily navigate onward to any referenced resources.  This makes it much easier to figure out questions like “why is my button red?”: Style Intellisense VS 2010 enables you to easily modify styles you already have in XAML, and now you get intellisense for properties and their values within a style based on the TargetType of the specified control.  For example, below we have a style being set for controls of type “Button” (this is indicated by the “TargetType” property).  Notice how intellisense now automatically shows us properties for the Button control (even within the <Setter> element): Great Video - Watch the Silverlight Designer Features in Action You can see all of the above Silverlight 4 Tools for Visual Studio 2010 features (and some more cool ones I haven’t mentioned) demonstrated in action within this 20 minute Silverlight.TV video on Channel 9: WCF RIA Services Today we also shipped the V1 release of WCF RIA Services.  It is included and automatically installed as part of the Silverlight 4 Tools for Visual Studio 2010 setup. WCF RIA Services makes it much easier to build business applications with Silverlight.  It simplifies the traditional n-tier application pattern by bringing together the ASP.NET and Silverlight platforms using the power of WCF for communication.  WCF RIA Services provides a pattern to write application logic that runs on the mid-tier and controls access to data for queries, changes and custom operations. It also provides end-to-end support for common tasks such as data validation, authentication and authorization based on roles by integrating with Silverlight components on the client and ASP.NET on the mid-tier. Put simply – it makes it much easier to query data stored on a server from a client machine, optionally manipulate/modify the data on the client, and then save it back to the server.  It supports a validation architecture that helps ensure that your data is kept secure and business rules are applied consistently on both the client and middle-tiers. WCF RIA Services uses WCF for communication between the client and the server  It supports both an optimized .NET to .NET binary serialization format, as well as a set of open extensions to the ATOM format known as ODATA and an optional JavaScript Object Notation (JSON) format that can be used by any client. You can hear Nikhil and Dinesh talk a little about WCF RIA Services in this 13 minutes Channel 9 video. Putting it all Together – the Silverlight 4 Training Kit Check out the Silverlight 4 Training Kit to learn more about how to build business applications with Silverlight 4, Visual Studio 2010 and WCF RIA Services. The training kit includes 8 modules, 25 videos, and several hands-on labs that explain Silverlight 4 and WCF RIA Services concepts and walks you through building an end-to-end application with them.    The training kit is available for free and is a great way to get started. Summary I’m really excited about today’s release – as they really complete the Silverlight development story and deliver a great end to end runtime + tooling story for building applications.  All of the above features are available for use both in VS 2010 as well as the free Visual Web Developer 2010 Express Edition – making it really easy to get started building great solutions. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Week in Geek: FBI Back Door in OpenBSD Edition

  - by Asian Angel

  This week we learned how to migrate bookmarks from Delicious to Diigo, fix annoying arrows, play old-school DOS games, schedule smart computer shutdowns, use breaks in Microsoft Word to better format documents, check the condition of hard-disks using Linux disk utilities, & what the Linux fstab is and how it works. Photo by Jameson42. Random Geek Links Another week with extra news link goodness to help keep you up to date. Photo by justmakeit. Report of FBI back door roils OpenBSD community Allegations that the FBI surreptitiously placed a back door into the OpenBSD operating system have alarmed the computer security community, prompting calls for an audit of the source code and claims that the charges must be a hoax. Fortinet: Job outlook improving for cybercrooks In an ironic twist in the job market, more positions will open up for developers who can write customized malware packers, people who can break CAPTCHA codes, and distributors who can spread malicious code, according to Fortinet. Enisa: Malware for smartphones is a ’serious risk’ Businesses and consumers are at risk of data breaches through smartphone use, according to the European Network and Information Security Agency. The trick with the f: Google and Microsoft web sites distribute malware Last week, Google’s DoubleClick advertising platform and Microsoft’s rad.msn.com online ad network briefly distributed malware to other web sites in the form of advertising banners. New scam tactic: Fake disk defraggers It would appear that scammers are trying out new programs to see which might best confuse potential victims and evade detection by legitimate antivirus software. Microsoft closes IE and Stuxnet holes As previously announced, Microsoft has released 17 security updates to close 40 security holes. All four Windows holes so far disclosed in connection with Stuxnet have now been closed. Microsoft Offers H.264 Support to Firefox on Windows via Add-On The new HTML5 Extension for Windows Media Player Firefox Plug-in add-on from Microsoft offers users that are running Firefox on Windows 7 H.264 support for HTML5 video playback. Google proclaims Chrome business-ready Google has announced that Chrome is ready for corporate use. Microsoft Tells Exchange Customers to Think Twice Before Opting for Google Message Continuity This week, Microsoft is telling companies still running Exchange 2010’s precursors that they should carefully consider the implications of embracing Google Message Continuity. Who Google has in mind for its Chrome OS users Steven Vaughan-Nichols explains why he feels that Chrome OS will be ideal for either office-workers or people who need a computer, but do not know the first thing about how to use one safely. Oracle takes office suite to the cloud Oracle has introduced Cloud Office 1.0, a cloud-based version of its office suite, which is aimed at web and mobile users. Mozilla pays premiums for reports of vulnerabilities The Mozilla Foundation has followed Google’s example by expanding its rewards program for reports of vulnerabilities in its Web applications. Who bought those 882 Novell patents? Not just Microsoft The mysterious CPTN Holdings — the organization that bought the 882 Novell patents as part of the terms of the Attachmate acquisition of Novell – has been unmasked (Microsoft, Apple, EMC and Oracle). Appeals court: Feds need warrants for e-mail Police must obtain search warrants before perusing Internet users’ e-mail records, a federal appeals court ruled today in a landmark decision that struck down part of a 1986 law allowing warrantless access. Geek Video of the Week What happens when someone plays a wicked prank by shoveling crazy snow paths that lead to dead ends or turn back on themselves? Watch to find out! Photo by CollegeHumor. Janitor Snow Shoveling Prank Random TinyHacker Links The Oatmeal on Cat vs Internet What lengths will our poor neglected kitty hero have to go to in order to get some attention? Guide On Using JoliCloud With Windows JoliCloud is a nifty operating system that’s made for people who need a light-weight OS that’s mostly cloud based. Check this guide on using it with Windows. Use Cameyo to Easily Create Portable Programs Here’s a nifty tool to make portable apps out of programs in Windows. Check out the guide to do it. Better Family Tech Support A nice new site by Google to help members of family understand how computers work. Track Your Stolen Mobile Phone With F-Secure A useful anti-theft tool for your mobile phone. Super User Questions Another week with great answers to popular questions from Super User. What Chrome password manager fits my requirements? What’s the best way to be able to reimage windows computers? Could you suggest feature-rich disk-based personal backup program for linux (and I’ve seen a few)? What is IPv6 and why should I care? Is there any way to find out what programs are trying to connect to Internet on windows? How-To Geek Weekly Article Recap Here are our hottest articles full of geeky goodness from this past week at HTG. 20 OS X Keyboard Shortcuts You Might Not Know Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now. Is Your Desktop Printer More Expensive Than Printing Services? Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.? The Twelve Days of Geekmas One Year Ago on How-To Geek Enjoy reading through our latest batch of retro-geek goodness from one year ago. Macrium Reflect is a Free and Easy To Use Backup Utility How To Turn a Physical Computer Into A Virtual Machine with Disk2vhd How To Restore Windows 7 from a System Image How To Manage Hard Drive Space Used by Windows 7 Backup and Restore How To Manage Hibernate Mode in Windows 7 The Geek Note That is all we have for you this week, so see you back here again after the holidays! Got a great tip? Send it in to us at [email protected]. Photo by mitjamavsar. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >