Search Results

Search found 106 results on 5 pages for 'awake zoldiek'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Can I make my PC backup and then sleep on demand with WHS?

    - by Simon
    I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

    Read the article

  • Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

    - by NetworkingWannabie
    Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

    Read the article

  • Why won't my computer go to sleep automatically?

    - by Django Reinhardt
    Windows 8 is set to sleep after 30 mins, and it used to work, but recently it's started refusing to sleep. (I can still manually ask it to go to sleep without any issue.) I was having issues a while ago, but it was with my network adapter. That's since been disabled, so it's definitely not that: I've checked to see what devices are able to wake up my machine, but it only appears to be my mouse: Which is odd, because I haven't recently changed my mouse, and more confusing still: The monitor does go to sleep just fine. If it was actually the mouse keeping my system awake, I'm pretty sure the monitor wouldn't go to sleep. I've checked my Wake Timers, and nothing: I've also checked my existing requests... UPDATE: I found something. What to do with it, I don't know... Note: Even when /requests says that there's "NONE" under every category, my machine still won't sleep(!). In short: How can I tell what's preventing my computer from Sleeping? UPDATE: Ok, so I now have a few more pieces of the puzzle. I came back to my computer and it was ASLEEP! Lawks! It seems that the only times it doesn't sleep is if VLC Player is open, even if a video isn't actually playing. UPDATE UPDATE: Ok, so it won't sleep sometimes when VLC Player ISN'T running, either. Bah!

    Read the article

  • Wake on Demand for Apache server in OS X 10.8

    - by Gary
    Mac OS X Mountain Lion does not have a Web Sharing box in the Sharing system prefs menu. It is thoroughly discussed on the web that the Apache server is available, and that it can be turned on manually in the command line, or by using a convenient Prefs Pane. That works while the computer is awake. But, when my computer goes to sleep, the server stops working, even though Wake for Network Access is checked in the Energy Saver Pref Pane. From the discussion on Bonjour, I see that this problem probably results from the fact that Apache isn't registered with Bonjour. Does that sound likely? If not, please make some suggestions. The connection is via hard-wired ethernet. If registration with Bonjour is the problem, I'd like to know how to register it. You gave a nice description of dns-sd, and the command description says dns-sd -R Name Type Domain Port [TXT...] (Register a service)", but I don't know what to use for "Name" or "Type", or the format of the domain. I tried some dns-sd -B searches and found nothing I could use as a model, and it doesn't show up in Bonjour Browser. Any suggestions would be appreciated.

    Read the article

  • Wake a Mac display from sleep via SSH

    - by MaxGabriel
    I'm using Jenkins as a CI server, where I'm SSHing into an iMac running OS X Mountain Lion (10.8.4) to run some UIAutomation integrations tests on an iOS app. The iMac actually sits 10 ft from me (but across a table) so I'm able to see the screen. However, the tests don't wake up the display, so I often can't see them. Is there a way to wake up the display from the terminal once Jenkins has SSHed in? So far I have tried using Applescript to press an arrow key, and using the Wake Assist application. I also tried setting the wake schedule to be the current date. Finally, I tried using the caffeinate command: caffeinate -t 300 &. The computer's "Wake for Wi-Fi access" checkbox is enabled. So far my best workaround is to just set the iMac to stay awake for atleast 3 hours. However, it'd be nice to keep normal sleep behavior, as I hypothesize that the screen waking from sleep would alert me visually that the integration tests are running. It's also significantly cooler :)

    Read the article

  • IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

    - by Sam Abraham
    IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

    Read the article

  • If not now, then when?

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/10/25/if-not-now-then-when.aspx The time has been flying by this year. It seems like only yesterday that I mentioned the gorillagator, a simple construct of confusion to try to draw attention to my message. In reality, that message was sent over a month ago. During that time, the hours slipped to days and days to weeks. Many exciting things have happened to myself; I'm sure many exciting things have happened to you. I'm also sure that many terrifying things have happened to children and their families. 62 children enter treatment at a Children's Miracle Network Hospital every minute. That's nearly 60,000 children since I sent the last email. To put that number in perspective, that is more than the population of Greenland. If we expand that to the past year, they have been nearly 550,000 children treated. That is almost the population of Huntsville, Decatur, and all their suburbs combined. Over the past 4 years, I have raised a little more than $3,000 for Children's Hospital of Alabama. As a result, I received a call from the organizers of Extra Life thanking me for my dedicated work and informing me that I was the top supporters for Children's Hospital of Alabama ... with my measly three grand. We can do much better than that. It may sound like I'm trying to have fun by playing games for 24 hours. It is more than that. It is me using my time and body as a catalyst. It is me putting my passion to work for a cause. It is me turning my love into something tangible. I have been campaigning and fighting to give these children a chance for years. I have been asking you to help me support these children and families. I've been putting in countless hours of talking to people, impassioned emails, and carefully constructed tweets. I have been fighting with cutting edge, and sometimes expensive, technology to try to provide live streams of my marathons. I yearly put my body through 24 (and, this year, 25) hours of no sleep. I do this to represent the countless hours these families sit awake at their children's side. All I ask is a few minutes on a website and a few dollars. These few minutes and few dollars go a long way help people that are experiencing circumstances that only occur in our nightmares. I also ask that you take one extra step. Forward this plea to those that you know. I can only reach a small fraction of a percentage of the people that may be able to help. Together, we can reach the world. I raise money for Children's Hospital of Alabama. As this message branches out, people may wish to support a hospital closer to their area. I have included a link to the list of people that have dedicated their time and have received no donations. Find someone on the list supporting your local hospital and give them a donation. Let them know that their time and effort are appreciated. Together, we can do something great. Together, we can make a difference. Together, we all stand tall. Thank you. You can get more information at http://www.extra-life.org and http://childrensmiraclenetworkhospitals.org/" My donation page is http://www.extra-life.org/participant/cgardner The list of participants without donations is http://www.extra-life.org/index.cfm?fuseaction=donorDrive.eventParticipantList&page=629&eventID=512

    Read the article

  • Any tips on getting hired as a software project manager straight out of college?

    - by MHarrison
    I graduated with a BS in compsci last September, and I've been trying (unsuccessfully) to find a job as a project manager ever since. I fell in love with software engineering (the formal practice behind it all, not just coding) in school, and I've dedicated the last 3-4 years of my life to learning everything I can about project management and gaining experience. I've managed several projects (with teams around 12 people) while in school, and I worked with my university's software engineering research lab. My résumé is also decent - I worked as a programmer before I went to school (I'm 27 now), and I did Google Summer of Code for 3 summers. I also have general "people management" experience via working as the photo editor for my university's newspaper for 2 years. My first problem with the job hunt is not getting enough interviews. I use careers.stackoverflow.com, which is awesome because I usually get contacted by non-HR people who know what they're talking about, but there's just not enough companies using it for me to get interviews on a regular basis. I've also tried sites like monster.com, and in a fit of desperation, I sent out no less than 60 applications to project management positions. I've gotten 3 automated rejection letters and that's it. At least careers.stackoverflow gets me a phone interview with 8/10 places I apply to. But the main (and extremely frustrating) problem is the matter of experience. I've successfully managed projects from start to finish (in my software engineering classes we had real customers come in with a real software need and we built it for them), but I've never had to deal with budgets and money (I know this is why HR people immediately turn me away). Most of these positions require 5+ years PM experience, and I've seen absurd things like 12+ years required. Interviews are also maddening. I've had so many places who absolutely loved me and I made it to the final round of interviews, and I left thinking things went extremely well and they'd consider me. However, when I check in with them a week later, they tell me "We really liked you and your qualifications are excellent, but we're hoping to find someone with more experience." The bad interviews I can understand - like the PM position that would have had me managing developers both locally and overseas - I had 3 interviews with them and the ENTIRE interview process was them asking me CS brainteasers and having me waste time on things like writing quicksort on paper or writing binary search trees. Even when I tried steering the discussion towards more relevant PM stuff, they gave me some vague generic replies and went back to the "We want to be Google/MS" crap. But when I have a GOOD interview, they say my "qualifications are excellent" but they want "more experience"...that makes me want to tear my hair out. What else can I DO? While I'm aiming for technically-involved PM positions (not just crunching budget numbers), I really don't want a straight development job because I like creating software from the very high-level vs. spending a lot of time debugging memory leaks. In fact, I can't even GET development positions that I'm qualified for because I make the mistake of telling them that my future career goals are as PM (which usually results in them saying something like "Well we already have PMs and this position isn't really set up to get you there." - which I take to mean "No, that's my job, stay away.") My apologies on the long rant, but I'm seriously hellbent on getting hired as a PM since it's both my career goal and the passion that keeps me awake at night. Any suggestions on what the heck else I can do? I'm currently writing a blog where I talk about my philosophies about software engineering, and I'm writing up specs for an iOS app which I will design, code, and show employers, but this takes an awful lot of time that I don't have.

    Read the article

  • CI tests to enforce specific development rules - good practice?

    - by KeithS
    The following is all purely hypothetical and any particular portion of it may or may not accurately describe real persons or situations, whether living, dead or just pretending. Let's say I'm a senior dev or architect in charge of a dev team working on a project. This project includes a security library for user authentication/authorization of the application under development. The library must be available for developers to edit; however, I wish to "trust but verify" that coders are not doing things that could compromise the security of the finished system, and because this isn't my only responsibility I want it to be done in an automated way. As one example, let's say I have an interface that represents a user which has been authenticated by the system's security library. The interface exposes basic user info and a list of things the user is authorized to do (so that the client app doesn't have to keep asking the server "can I do this?"), all in an immutable fashion of course. There is only one implementation of this interface in production code, and for the purposes of this post we can say that all appropriate measures have been taken to ensure that this implementation can only be used by the one part of our code that needs to be able to create concretions of the interface. The coders have been instructed that this interface and its implementation are sacrosanct and any changes must go through me. However, those are just words; the security library's source is open for editing by necessity. Any of my devs could decide that this secured, private, hash-checked implementation needs to be public so that they could do X, or alternately they could create their own implementation of this public interface in a different library, exposing the hashing algorithm that provides the secure checksum, in order to do Y. I may not be made aware of these changes so that I can beat the developer over the head for it. An attacker could then find these little nuggets in an unobfuscated library of the compiled product, and exploit it to provide fake users and/or falsely-elevated administrative permissions, bypassing the entire security system. This possibility keeps me awake for a couple of nights, and then I create an automated test that reflectively checks the codebase for types deriving from the interface, and fails if it finds any that are not exactly what and where I expect them to be. I compile this test into a project under a separate folder of the VCS that only I have rights to commit to, have CI compile it as an external library of the main project, and set it up to run as part of the CI test suite for user commits. Now, I have an automated test under my complete control that will tell me (and everyone else) if the number of implementations increases without my involvement, or an implementation that I did know about has anything new added or has its modifiers or those of its members changed. I can then investigate further, and regain the opportunity to beat developers over the head as necessary. Is this considered "reasonable" to want to do in situations like this? Am I going to be seen in a negative light for going behind my devs' backs to ensure they aren't doing something they shouldn't?

    Read the article

  • Questions to ask to ensure someone understands programming? (and iOS)

    - by Stephen J
    So, I've been tutoring my friend for 2 years. Most people learn programming on their own in 3-6 months, (sans algorithms). It's confusing 'cause he'll run anywhere I tell him to, understands how to read C and C++ honestly better than the average college student, and he'll modify and repeat anything I do... but for the love of god he doesn't move on to new things and he still has test anxiety. I've recently realized he's copied and toyed with existing, but not once gained an understanding of why. I was under the impression he was learning fast because he could write it, but when you say "Make a function that takes an NSString" and he says "How?" and I say "The same way you make ANY function that takes any parameter, NSString is just a type like int" and all I hear is "No, it's an NSString, it's a special thing." and we get into an arguing match 'cause I'm like "It's just a class like any other class, you've used them for months now" and blah... I've subconsciously avoided comprehension questions because of this. Anyway, if you have him copy a program and say "Just initialize it" "Where?" "I don't care, didLoad or initWithCoder or Awake from nib, anywhere it gets initialized" and "No, it has to be exactly where you had it!" "No it doesn't!" I'm sick of this, but he won't give up. So I'm done avoiding these yelling matches and becoming a sadist from now on. I would like some help in finding questions to ask him that force him to understand what he's doing. I'd like some help and any resources I can find. CQuestions looked like a good site, but now I need some iPhone stuff. For example: *What do properties do? How are they changed? How do you change the name of the getter? *Why are Booleans inefficent? What advantage does int have over a boolean and how does the bit-shift operator help? *What does Copy do to a string? *What's the difference between a view controller and a uiview? *Write a program from memory that displays blah on screen, and flashes each view one by one. From beginner up to intermediate, hobbyist with some algebra at most. I'm just looking for resources to work with. I left in backstory so you know to "twist" the questions so he doesn't know he's supposed to init a variable here or there, but has to figure it out, and learn why it goes "here" or that "anywhere is fine as long as it's". Sample programs, anything. I'm relatively open about this because, being a programmer, I seriously doubt he's the only one who has this issue. I'd like to know how others have overcome similar. What made things "click"? for you? Did you have a hard time finding answers on Google, and how did you learn a better way to find what you were looking for? (He's so exact, he'll search for how to write a checkers program with color X and Y inside a uiview, as his search string, instead of breaking it up into components, I need help with that too, and believe it is related). This type of problem has to remind one of us of someone they know. So, Exercises to force them to think? Ways we overcame this thing in the past? I greatly appreciate any help.

    Read the article

  • Merging two Regular Expressions to Truncate Words in Strings

    - by Alix Axel
    I'm trying to come up with the following function that truncates string to whole words (if possible, otherwise it should truncate to chars): function Text_Truncate($string, $limit, $more = '...') { $string = trim(html_entity_decode($string, ENT_QUOTES, 'UTF-8')); if (strlen(utf8_decode($string)) > $limit) { $string = preg_replace('~^(.{1,' . intval($limit) . '})(?:\s.*|$)~su', '$1', $string); if (strlen(utf8_decode($string)) > $limit) { $string = preg_replace('~^(.{' . intval($limit) . '}).*~su', '$1', $string); } $string .= $more; } return trim(htmlentities($string, ENT_QUOTES, 'UTF-8', true)); } Here are some tests: // Iñtërnâtiônàlizætiøn and then the quick brown fox... (49 + 3 chars) echo dyd_Text_Truncate('Iñtërnâtiônàlizætiøn and then the quick brown fox jumped overly the lazy dog and one day the lazy dog humped the poor fox down until she died.', 50, '...'); // Iñtërnâtiônàlizætiøn_and_then_the_quick_brown_fox_... (50 + 3 chars) echo dyd_Text_Truncate('Iñtërnâtiônàlizætiøn_and_then_the_quick_brown_fox_jumped_overly_the_lazy_dog and one day the lazy dog humped the poor fox down until she died.', 50, '...'); They both work as it is, however if I drop the second preg_replace() I get the following: Iñtërnâtiônàlizætiøn_and_then_the_quick_brown_fox_jumped_overly_the_lazy_dog and one day the lazy dog humped the poor fox down until she died.... I can't use substr() because it only works on byte level and I don't have access to mb_substr() ATM, I've made several attempts to join the second regex with the first one but without success. Please help S.M.S., I've been struggling with this for almost an hour. EDIT: I'm sorry, I've been awake for 40 hours and I shamelessly missed this: $string = preg_replace('~^(.{1,' . intval($limit) . '})(?:\s.*|$)?~su', '$1', $string); Still, if someone has a more optimized regex (or one that ignores the trailing space) please share: "Iñtërnâtiônàlizætiøn and then " "Iñtërnâtiônàlizætiøn_and_then_" EDIT 2: I still can't get rid of the trailing whitespace, can someone help me out?

    Read the article

  • Why are controls (null) in awakeFromNib?

    - by fuzzygoat
    This is a follow on from another question regarding why I could not set UIControls in awakeFromNib. The answer to that is that as you can see below the controls are nil in the awakeFromNib, although they are initialised to the correct objects by the time we get to viewDidLoad. I setup the view the same as I always do, should I be doing something different to access them here, the xib(nib) was designed and saved with the current version of Image Builder. CODE: @interface iPhone_TEST_AwakeFromNibViewController : UIViewController { UILabel *myLabel; UIImageView *myView; } @property(nonatomic, retain)IBOutlet UILabel *myLabel; @property(nonatomic, retain)IBOutlet UIImageView *myView; @end . @synthesize myLabel; @synthesize myView; -(void)awakeFromNib { NSLog(@"awakeFromNib ..."); NSLog(@"myLabel: %@", [myLabel class]); NSLog(@"myView : %@", [myView class]); //[myLabel setText:@"AWAKE"]; [super awakeFromNib]; } -(void)viewDidLoad { NSLog(@"viewDidLoad ..."); NSLog(@"myLabel: %@", [myLabel class]); NSLog(@"myView : %@", [myView class]); //[myLabel setText:@"VIEW"]; [super viewDidLoad]; } OUTPUT: awakeFromNib ... myLabel: (null) myView : (null) viewDidLoad ... myLabel: UILabel myLabel: UIImageView Much appreciated ... gary

    Read the article

  • NHibernate / ORM - Child Update over Web Service

    - by tyndall
    What is the correct way to UPDATE a child object with NHibernate but not have to "awake" the parent object. Lets say you would like to try to avoid this because the parent object is large or expensive to initiate. Lets assume classes are called Author(parent) and Book(child). (still, trying to avoid instantiating Author) Book comes back over a web service as XML. It gets deserialized back into a CLR object. Book has an AuthorId property which allows this to happen. But it also has a Author property. Problem, comes when you try to SaveOrUpdate() Book and the author_id in the database gets wiped out because the Author was null when the object gets deserialized. This seems like this would be a common problem. What is the workaround? Also, if you instantiate the Author and it has a Books property. The book you are trying to update is already one of these books (List<Book>). We have also run into the "a different object with the same identifier value was already associated with the session" problems. What is the standard process to update a child over a web service?

    Read the article

  • Adaptec 5805 after reboot don't starting

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

    Read the article

  • iCloud stuff stops working while connected to OpenVPN [closed]

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again!

    Read the article

  • Adaptec 5805 not recognized after reboot

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

    Read the article

  • Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

    Read the article

  • Can't validate mine, sudo nor root in Debian "Jessie" Gnome anymore?

    - by Janar
    I'm Debian beginner & GUI guy in a bit of trouble? Can't login as sudo/gksu/root/su nor as (main/super)user after removed user password via Gnome-user-settings. History of actions (Probably irrelevant though) Installed Debian "Jessie" GNU/Linux with xFce GUI (en-US) as only OS. HardWare is ThinkPad w510. Skipped root user password in setup, to get sudo for superuser easily. Logged in (as always had) with Gnome (3.4.x), not once with xFCE. (installed Xfce. Installed xFce only to achieve more control (easier management) over packages this way, to set-up gnome much more by mine likes. Added more jessie repros (same ones as in Wheesy stable by default but for Jessie as, Jessie only had repros for security updates by default). Installed lots of gtk(3) & gnome(3) based soft; (- restarted again after this) Installed propietary graphics card driver for mine nvidia quadro. (- restarted once again after that one) Installed more stuff related to mine work/school/devel. The actual problem Had a plan to restart again, but wanted to set up auto-login first, instead set user password to none (don't ask why / perhaps caused by being awake for a looooong time), noticed it, and set also to auto-login, but couldn't undo mine previous mistake to create new password for me. As mine password is set to none I would have expected that simply return in pass prompt for emty password field would do, but it won't authenticate. I tried Alt+F2 "gksu gedit" as well as: sudo wget "https://www.some-page.eu/file.ext" and "su" in terminals, none has applied (quite logical actually - as I'm sudoer and highest ranked super user, besides only user in computer). Current stand Everything worked & still works nice after this accident, besides this password prompts part. To spoked to log-out nor restart. Synaptic package-manager is still open with root rights (only one, that has left open prior to the issue and not closed since, just in case). Goggled for help and read some manuals/faqs/how-tos - mostly lead to sudoers file management, but not found one specifically for mine issue - so still not any smarter. Really hope, that I don't have to redo OS inst all over again, by just one stupid mistake. Thanks for your reply :-)

    Read the article

  • Red Gate does Byte Night 2012

    - by red(at)work
    On the 5th of October 2012, a team of nine plucky Red Gaters braved the howling wind and the driving rain to sleep outside. No tents or mattresses were allowed – all we took for protection were sleeping bags, groundsheets, plastic sacks and Colin’s enormous fishing umbrella (a godsend in umbrella-y disguise). Why would we do such a thing? For Byte Night, an annual tech sector sleepout in support of Action for Children, who tackle the causes as well as the consequences of youth homelessness. Byte Night encourages technology professionals to do for one night a year what thousands of young people have to do every night – sleep rough.  We signed up for Byte Night in the warm, heady midst of the British summer, thinking it couldn’t possibly be all that bad. Even on the night itself – before the rain began to fall, sat in the comfort and warmth of a company canteen, drinking wine and eating chill and preparing to win the pub quiz – we were excited and optimistic about the night that lay ahead of us. All of that changed as soon as we stepped out into one of the worst rainstorms of the year. Brian, the team’s birthday boy, describes it best: Picture the scene: it’s 3 am on a Friday. I’m lying outside, fully clothed in a sleeping bag, wearing a raincoat, trussed up inside a large plastic pocket, on a ground sheet beneath a giant umbrella, wedged so tightly between two of my colleagues that I can’t move my arms. I’m wide awake, staring up at the grey sky beyond the edge of the umbrella; a limp, flickering white glow hints at a moon somewhere behind the drifting clouds. I haven’t slept since we first moved outside at 11 pm. Outside. Did I mention we were outside? I’m hung over. I need the loo. But there is no way on earth that I’m getting out of this sleeping bag. It’s cold. It’s raining. Not just raining, but chucking it down. It’s been doing this non-stop since 10pm. The rain sounds like a hyperactive drummer on the fishing umbrella, and the noise is loud and relentless. Puddles of water are forming all over the groundsheet, and, despite being ensconced inside the plastic pouch, I am wet. The fishing umbrella is protecting me from the worst of the driving rain, but not all of me is under it, and five hours of rain is no match for it. Everything is wet. My left side has become horribly damp. My trainers, which I placed next to my sleeping bag, are now completely soaked through. Mmm. That’ll be fun in the morning. My head is next to Colin’s head on one side, and a multi-pack of McCoy’s cheddar and onion crisps on the other. Don’t ask about the tub of hummus. That’s somewhere down by my ankles, abandoned to the night. Jess, who is lying next to me, rolls over onto her side. A mini waterfall cascades from her rain-pouch onto my face. Bah. I continue to stare into the heavens, willing the dawn to hurry up. Something lands on my face. It’s a mosquito. Great. Midnight, when this still seemed like fun – when we opened some champagne and my colleagues presented me with a caterpillar birthday cake, when everyone was drunk and jolly and full of stoic resolve – feels like a long time ago. Did I mention that today is my birthday? The remains of the caterpillar cake endure the same fate as the hummus, left out in the rain like a metaphor for sadness. It’s getting colder. I can see my breath. Silence has descended on the group, apart from the rustle of plastic. And the rain, obviously. Someone snores, and I envy whoever it is the sweet escape of sleep. I try to wriggle a bit further down inside my sleeping bag, but it doesn’t want to be wriggled into. Only 3 hours till dawn. 180 minutes. I begin to count them off, one at a time.  All nine of us got to go home in the morning, but thousands of children across the UK don’t have that luxury. If you’d like to sponsor the Red Gate Byte Night team, our JustGiving page can be found here.   Chris, before the outside bit actually happened. More photos from Byte Night Cambridge 2012 can be found here.

    Read the article

  • Having a hard time having consecutive animations for an attack

    - by Kelby Styler
    So I've been trying to figure this out for about 8 hours now...It's driving me nuts because I am pretty sure that it is something dead simple that I am just not understanding. I had everything working fine when I was just cycling through the animation: Idle - Attack - Attack 1 - Attack 2. Just in an infinite loop. The problem now is that I want it to go Attack - check if x time passes if ctrl pressed before x passes move to Attack 1, if not move back to Idle - Then either Attack 1 or Idle depending on how long has passed. I've almost gotten it a few time, but something always happens where it falls apart if I press ctrl too fast or after multiple cycles of the animation. Any help would be appreciated, I'm just at my wits end on this one. I've been looking at this so long that I just don't know where to go anymore. Code is below, here is the controller using UnityEngine; using System.Collections; public class MeleeAttack : MonoBehaviour { public int damage; public bool Attack; public bool Attack1; public bool Attack2; public bool Idle; private Animator animator; private int attnum = 0; private float count = 2f; private float timeLeft; //Gives value to damage output void MAttackDmg () { if (Input.GetKeyDown (KeyCode.RightControl) || Input.GetKeyDown (KeyCode.LeftControl)) { switch (attnum) { case (0): Attack = true; damage = 2; animator.SetBool ("Attack", Attack); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (1): Attack1 = true; damage = 2; animator.SetBool ("Attack1", Attack1); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (2): Attack2 = true; damage = 2; animator.SetBool ("Attack2", Attack2); attnum = 0; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; } } if (Input.GetKeyUp (KeyCode.RightControl) || Input.GetKeyUp (KeyCode.LeftControl)) { switch (attnum) { case (0): Debug.Log ("false"); damage = 0; if (timeLeft <= 0f) { Attack2 = false; animator.SetBool ("Attack2", Attack2); Debug.Log ("t1"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (1): Debug.Log ("false1"); damage = 0; if (timeLeft <= 0f) { Debug.Log ("t2"); Attack = false; animator.SetBool ("Attack", Attack); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (2): Debug.Log ("false2"); damage = 0; if (timeLeft <= 0f) { Attack1 = false; animator.SetBool ("Attack1", Attack1); Debug.Log ("t3"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; } } } // Use this for initialization void Awake () { animator = GetComponent<Animator> (); } // Update is called once per frame void Update () { timeLeft -= Time.deltaTime;; MAttackDmg (); } void Start (){ timeLeft = count; } }

    Read the article

  • A*, Tile costs and heuristic; How to approach

    - by Kevin Toet
    I'm doing exercises in tile games and AI to improve my programming. I've written a highly unoptimised pathfinder that does the trick and a simple tile class. The first problem i ran into was that the heuristic was rounded to int's which resulted in very straight paths. Resorting a Euclidian Heuristic seemed to fixed it as opposed to use the Manhattan approach. The 2nd problem I ran into was when i tried added tile costs. I was hoping to use the value's of the flags that i set on the tiles but the value's were too small to make the pathfinder consider them a huge obstacle so i increased their value's but that breaks the flags a certain way and no paths were found anymore. So my questions, before posting the code, are: What am I doing wrong that the Manhatten heuristic isnt working? What ways can I store the tile costs? I was hoping to (ab)use the enum flags for this The path finder isnt considering the chance that no path is available, how do i check this? Any code optimisations are welcome as I'd love to improve my coding. public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map ) { return FindPath( startTile, endTile, map, TileFlags.WALKABLE ); } public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map, TileFlags acceptedFlags ) { List<Tile> open = new List<Tile>(); List<Tile> closed = new List<Tile>(); open.Add( startTile ); Tile tileToCheck; do { tileToCheck = open[0]; closed.Add( tileToCheck ); open.Remove( tileToCheck ); for( int i = 0; i < tileToCheck.neighbors.Count; i++ ) { Tile tile = tileToCheck.neighbors[ i ]; //has the node been processed if( !closed.Contains( tile ) && ( tile.flags & acceptedFlags ) != 0 ) { //Not in the open list? if( !open.Contains( tile ) ) { //Set G int G = 10; G += tileToCheck.G; //Set Parent tile.parentX = tileToCheck.x; tile.parentY = tileToCheck.y; tile.G = G; //tile.H = Math.Abs(endTile.x - tile.x ) + Math.Abs( endTile.y - tile.y ) * 10; //TODO omg wtf and other incredible stories tile.H = Vector2.Distance( new Vector2( tile.x, tile.y ), new Vector2(endTile.x, endTile.y) ); tile.Cost = tile.G + tile.H + (int)tile.flags; //Calculate H; Manhattan style open.Add( tile ); } //Update the cost if it is else { int G = 10;//cost of going to non-diagonal tiles G += map[ tile.parentX, tile.parentY ].G; //If this path is shorter (G cost is lower) then change //the parent cell, G cost and F cost. if ( G < tile.G ) //if G cost is less, { tile.parentX = tileToCheck.x; //change the square's parent tile.parentY = tileToCheck.y; tile.G = G;//change the G cost tile.Cost = tile.G + tile.H + (int)tile.flags; // add terrain cost } } } } //Sort costs open = open.OrderBy( o => o.Cost).ToList(); } while( tileToCheck != endTile ); closed.Reverse(); List<Tile> validRoute = new List<Tile>(); Tile currentTile = closed[ 0 ]; validRoute.Add( currentTile ); do { //Look up the parent of the current cell. currentTile = map[ currentTile.parentX, currentTile.parentY ]; currentTile.renderer.material.color = Color.green; //Add tile to list validRoute.Add( currentTile ); } while ( currentTile != startTile ); validRoute.Reverse(); return validRoute; } And my Tile class: [Flags] public enum TileFlags: int { NONE = 0, DIRT = 1, STONE = 2, WATER = 4, BUILDING = 8, //handy WALKABLE = DIRT | STONE | NONE, endofenum } public class Tile : MonoBehaviour { //Tile Properties public int x, y; public TileFlags flags = TileFlags.DIRT; public Transform cachedTransform; //A* properties public int parentX, parentY; public int G; public float Cost; public float H; public List<Tile> neighbors = new List<Tile>(); void Awake() { cachedTransform = transform; } }

    Read the article

  • Extra Life 2012 - The Final Plea ... Until the Next One

    - by Chris Gardner
    I thought I'd share the email stream that my friends and family get about the event.So, here we are again. We scream closer to the event, and the goal is not met.I was approached by the ghost of feral platypii past last night. Well, approached is putting it lightly. I was mugged by the ghost of platypii past last night. He reminded me, in no uncertain terms that I have only reached the midway point of my fundraising goal. He then reminded me, in even less uncertain terms, that we are one week away from the event. There were other reminders past that, but this is a family broadcast. *shudder*Now, let us be serious for a moment. The event organizers claim a personal story helps to tug heart strings, whatever those are...I've been to Children's Hospital of Birmingham. I had to take Spawn, the Latter, there to verify she was not going to die. Instead, she's just a ticking time bomb for the next generation, but I digress.While I was there, I saw things. I saw child after child after child waiting for their appointment. I saw the most sublime displays of children's art juxtaposed with hospital sterilization that I could ever possibly imagine. I saw and heard things that only occur in the nightmares of parents, and I was only in the waiting rooms.But I will never forget the 10-ish year old girl that came in for her regularly scheduled dialysis appointment ... as if it was just another Friday afternoon. She had her school books, a little snack, a book to read for pleasure, and a DVD, in case she finished her homework a little early. You know, everything you'd need for an afternoon hooked up to a huge medical machine that going to clean out all the toxins in your blood. As she entered the secured area, she warmly greeted all the doctors and nurses with the same familiarity that I would greet the staff of my favorite coffee shop as I stopped in for my morning cup of coffee.I don't know the status of that little girl. I don't know if she's healthy or, quite frankly, alive. I don't even know her name, as I only heard it in passing for the 37 seconds our paths crossed. However, I do remember being incredibly moved and touched by her upbeat attitude about the situations, and I hope that my efforts last two Octobers got her, in some way, a little comfort.And, if she is still with us, I hope we can get her a little more.=== PREVIOUS MESSAGE FOLLOWS ===Greetings (Again),If you are receiving this updated message, then you didn't feel generous the first time. Now, I tried to be nice the first time. I tried to send a simple, unobtrusive email message to get you into the spirit. Well, much like the bell ringers that I ignore in front of the Wal-Mart, you ignored me.I probably should have seen that coming...However, unlike those poor souls, I know how to contact you. And I can find out where you live. So, so, so, you better feel lucky that I'm too lazy to terrorize you people, but cause I could do it.Remember, it's not for me, it's for those poor kids... and the feral platypii.  Because, we can make more children, but platypii are hard to come by.=== ORIGINAL MESSAGE FOLLOWS ===It's that time of year again. The time when I beg you for money for charity. See, unlike those bell ringers outside Wal-Mart, I don't do it when you have ten bazillion holiday obligations...Once again, I will be enduring a 24-hour marathon of gaming to raise money for Children Hospital in Birmingham. All the money goes straight to them, and you get to tell Uncie Samuel that you're good for that money. I'd REALLY like to break $1000 this year, as I have come REALLY close for the past 2 year to doing so.This year, the event will take place on October 20th, beginning at 8 A.M. Once again, I will try to provide some web streams, etc, if you want to point and laugh (especially if I have to result to playing Dance Central at 4 AM to stay awake for the last part.)Look at it this way, I'm going to badger you about this for the next month. You might as well donate some money so you can righteously tell me to shut the Smurf up.You can place your bid at the link below. Feel free to spread the word to anyone and everyone.I thank you. The children thank you. Several breeds of feral platypus thank you. Maybe, just maybe, doing so will help you feel the love felt by re-fried beans when lovingly hugged in a warm tortilla.Enjoy your burrito.http://www.extra-life.org/participant/cgardner

    Read the article

  • How do I dig myself out of this DEEP hole? [closed]

    - by user74847
    I may be a bit bias in the way i word this but any opinions and suggestions are welcome. I should start by saying i have a MSc in CS and a degree in new media +6 years expereince and im probably around a middleweight developer. I started a web development company with my friend from uni a year ago, there was a 4 month gap in the middle where i went miles away work on a big project. Ive since returned and picked up where we left off. A year on though i find im still staying up til 5am and getting up at 9 sometimes 2-3 days without sleep. While i was away i was working 9-5 and struggling to keep up with doing stuff for my clients 8 hours ahead, after work, so things stagnated. We currently have about 12 active projects, with one other part time developer and a full time freelancer who is dealing with one of our major projects. I am solely responsible for concurrently developing 2 big sites similar to gumtree in functionality, at the same time as about 5-6+ small WordPress based 5-10page sites. a lot of the content isnt in yet or the client is delaying so i chop and change project every other day which does my head in. Is it reasonable to expect myself to remember the intricate details of each project when i come back to it a week later? and remember the details of a task which hasnt been written down? my business partner seems to think so. or am i just forgetful? Im particularly bad at estimating timescales which doesnt help, added to that a lot of the technologies im am using are new to me (a magento site took weeks to theme rather than days and was full of bugs, even after 1000's of google searches and hours reading forums) im still trying to learn and find the best CMS for us to use and getting my head around the likes of Bootstrap and jquery, Cpanel / Linux (we just got a blank vps for me to set up with no experience) even installing an SSL certificate caused everyone's mail clients to go down which was more stress for me to sort out. I find the pressure of the workload and timescales and trying to learn this stuff so fast is beginning to turn me against my career path. The fact that i never seem to get anything done really winds up my business partner and iv come to associate him with the stress and pain of the whole situation especially when I get berated or a look that says "oh you retard" when I forget something. Even today i spent hours learning how a particular themeforest theme worked with wordpress and how i could twist it to work for our partiuclar needs, on the surface had done no work, that triggered a 30 minute tirade of anger and stress and questioning what i had done from my business partner. had i taken too long to work on that? shoudl i have done it in 2 hours instead of 6? i told him i would take 2 hours. i was wrong. I feel like im running myself into the ground. My sleeping pattern has got so bad that when im working im half asleep and making mistakes, my eyes are constantly purple underneath, i literally fall asleep at my desk, its affecting my social life too, ive not slept more than lightly for the last year and grind through impossible code puzzles in my half sleep wich keeps me awake, when im already exhausted. plus the work is rushed and buggy when it does get done so drags on into the next project. I also procrastinate quite badly, pacing the livingroom, looking out the window when Im alone for three days straight in the flat and start to get cabin fever which means i do even less work and the negative feedback loop continues. I get told im the only one with the problem when i say that i cant work from home any more, and examples of other freelancers get brought up. an office wouldnt bring any extra cash in to the company but im convinced having that moving more than 2 meters away from my bed to go to "work" would get me working, at the moment i feel guilty like i should be working 24-7. It is important that we do all this work to raise enough cash to get our business to the next level but every month still feels like a struggle to pay the rent (there is about £20K coming in by Jan) and i have to borrow money from friends often to buy food or get a taxi to a meeting, so it is vital the money keeps coming in. (im also 20 mins late for nearly all meetings but thats a different issue) have you experienced anything similar? how can i deal with the issues ive raised? is it realistic to develop 10 sites at once? how can i improve my relationship with my business partner? do you struggle to work at home? how do you deal with that? i think if i dont get my life on track by feb i will seriously consider giving it all up, but that seems like such a waste. any ideas!!? i need help! Thanks.

    Read the article

  • Is it normal for a programmer with 2 years experience to take a long time to code simple programs?

    - by ajax81
    Hi all, I'm a relatively new programmer (18 months on the scene), and I'm finally getting to the point where I'm comfortable accepting projects and developing solutions under minimal supervision. Unfortunately, this also means that I've become acutely aware of my performance shortfalls, the most prevalent of which is the amount of time it takes me to develop, test, and submit algorithms for review. A great example of what I'm talking about occurred this week when I was tasked with developing a simple XML web service (asp.net 3.5) callable via client-side JavaScript, that accepts a single parameter and returns a dataset output to a modal window (please note this is the first time I've had to develop a web service and have had ZERO experience creating/consuming them...let alone calling them from JS client side). Keeping a long story short -- I worked on it for 4 days straight, all day each day, for a grand total of 36 hours, not including the time I spent dwelling on the problem in the shower, the morning commute, and laying awake in bed at night. I learned a great deal about web services and xml/json/javascript...but was called in for a management review to discuss the length of time it took me to develop the solution. In the meeting, I was praised for the quality of my work and was in fact told that my effort was commendable. However, they (senior leads and pm's) weren't impressed with the amount of time it took me to develop the solution and expressed that they would have liked to see the solution in roughly 1/3 of the time it took me. I guess what concerns me the most is that I've identified this pattern as common for myself. Between online videos, book research, and trial/error coding...if its something I haven't seen before, I can spend up to two weeks on a problem that seems to only take the pros in the videos moments to code up. And of course, knowing that management isn't happy with this pattern has shaken me up a bit. To sum up, I have some very specific questions I'd like to ask, and would greatly appreciate your objective professional feedback. Is my experience as a junior programmer common among new developers? Or is it possible that I'm just not cut out for the work? If you suspect that my experience is not common and that there may be an aptitude issue, do you have any suggestions/solutions that I could propose to management to help bring me up to speed? Do seasoned, professional programmers ever encounter knowledge barriers that considerably delay deliverables? When you started out in the industry, did you know how to "do it all"? If not, how long did it take you to be perceived as "proficient"? Was it a natural progression of trial and error, or was there a particular zen moment when you knew you had achieved super saiyen power level? Anyways, thanks for taking the time to read my question(s). I don't know if this is the right place to ask for professional career guidance, but I greatly appreciate your willingness to help me out. Cheers, Daniel

    Read the article

  • iCloud stuff stops working while connected to OpenVPN

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again! (I tried serverfault, it was closed as off-topic. I'm trying here and the Unix site as well. Here because it's a more general audience that might know more about OpenVPN based on the number of questions I see asked about it) EDIT: -I have also tried upgrading to Version: 2.3-beta1-debian0 - issue persists. -Removed all iptables rules except for the ones that flush -left this rule:iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source (server ip) -added iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT still, nothing works. I can see traffic in tcpdump on the server if i watch the tunnel: 20:03:48.702835 IP nk11p01st-courier105-bz.push.apple.com.5223 10.9.8.6.60772: Flags [F.], seq 2635, ack 1218, win 76, options [nop,nop,TS val 914984811 ecr 745921298], length 0 20:03:48.911244 IP 10.9.8.6.60772 nk11p01st-courier105-bz.push.apple.com.5223: Flags [R], seq 3621143451, win 0, length 0 But still, no push messages/notifications are ever delivered. :/ EDIT: * Further testing indicates that it might actually be the client after all.

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >