Search Results

Search found 12726 results on 510 pages for 'compatibility mode'.

Page 4/510 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Hard Drive Compatibility with Motherboard

    - by Wesley
    Here are the current specs to put things in context: ECS P4VXASD2+ V5.0 Intel Pentium 4 Northwood 2.8 GHz 2x 512MB PC2100 DDR266 SDRAM Maxtor DiamondMax 10 250 GB PATA (IDE) HDD Gigabyte 52x CD-ROM NVIDIA TNT2 Pro 16 MB OKIA 300W ATX PSU USB bracket Modem PCI Before, I actually had a 300 GB hard drive installed. However, I read the FAQ for the motherboard and discovered that a maximum of 250 GB hard drive was supported. So I ended up finding the one listed above and put that in. However, upon booting up, I reset the BIOS to defaults and auto-detected all the drives installed. The 250 GB came up as something like 251.0 GB. I didn't think much about it until I tried to boot up a Windows XP installation disc. It booted up successfully and run for about a minute before the computer randomly rebooted. I've made sure that all the jumpers and settings are correct and everything has been installed correctly. I've tried running it without the addons and one stick of RAM but still the same thing. What else could be causing this problem?

    Read the article

  • Eee PC 1015BX ram compatibility?

    - by AdrianaMX
    Asus Eee PC 1015BX Operating System Windows 7 Starter, 32bit CPU AMD Fusion APU C60 1.0GHz (dual core) Processor Graphic AMD Radeon HD 6290 (256 MB Shared) Memory DDR3, 1 x SO-DIMM, 1GB I have upgraded the preloaded "Windows 7 Starter" to "Windows 7 Professional" I want to upgrade the ram, from 1gb (factory) to 4 gb. What should i buy? SODDR3, 4GB, 1066MHZ, PC3-8500, 204PIN? or SODDR3, 4GB, 1333MHZ, PC3-10666, 204PIN? I already know that Windows 7 32-bits can't handle 4gb, only 3gb (but 3gb is better than one stick of 2gb). ASUS send me this link, but i think they are wrong, (or Insufficient Information for me) http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=ASU&Line=Eee%20PC&Model=71404 Thank you. CPU-Z Chipset Memory Type DDR3 Memory Size 750 MBytes Memory Frequency 532.2 MHz (3:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Bank Cycle Time (tRC) 27 Memory SPD NO INFO AIDA64 North bridge Properties North bridge AMD K14 IMC Supported Memory Types DDR3-800, DDR3-1066 SDRAM Memory Slots DRAM Slot #1 1 GB (DDR3 SDRAM) Integrated Graphics Controller Graphics Controller Type AMD Radeon HD 6290 (Wrestler) Graphics Controller Status Enabled Graphics Frame Buffer Size 256 MB

    Read the article

  • Why are Win7 IE browers running in IE7 mode?

    - by Skurpi
    On our site we currently have approx. 50% of our IE7 users running Windows 7. However, Win7 was released with IE8 meaning that something is not right. Based on this, we made the assumption that the modern IE browsers enter IE7 compatibility mode on our site. So we placed the "X-UA-Compatible=edge" meta tag on our site in hope to kill off IE7 support. However, after a week, the percentage of IE7 (and IE8) users have gone up for the first time since the start of this year. When looking at the X-UA-Compatible documentation, it is meant to be used for putting your site into an older mode. Is there any other way to make sure that IE doesn't enter compatibility mode? Is there something else we need to look for? And yes, we have so many users on our site that we can't kill off IE7 until it goes down under 2% of unique visitors. EDIT: We use <!doctype html> EDIT2: We haven't been able to reproduce the compatibility mode in our environments either

    Read the article

  • Why would Silverlight be crashing in Release but not in Debug mode?

    - by Edward Tanguay
    I have a Silverlight App that has worked well in Debug and Release modes for weeks. It still works well in Debug mode. However, now when I run it in Release mode, it starts, shows me the screen, loads the data, then hangs, and the browser (Firefox) closes automatically. I've tried other browsers and each of them crashes, Chrome says "The Silverlight Plug-In has crashed" for instance. Here are the last lines of Output that I get: 'firefox.exe' (Silverlight): Loaded 'System.Windows.Controls' 'firefox.exe' (Silverlight): Loaded 'System.Windows.Controls.Toolkit' 'firefox.exe' (Silverlight): Loaded 'C:\Program Files\Microsoft Silverlight\4.0.50524.0\en-US\mscorlib.debug.resources.dll' 'firefox.exe' (Silverlight): Loaded 'C:\Program Files\Microsoft Silverlight\4.0.50524.0\en-US\System.Windows.debug.resources.dll' The program '[1120] firefox.exe: Silverlight' has exited with code -2147023895 (0x800703e9). How can I get more information about what is happening at the point of crash in Release mode that is not happening in Debug mode?

    Read the article

  • SQL SERVER – SSIS Look Up Component – Cache Mode – Notes from the Field #028

    - by Pinal Dave
    [Notes from Pinal]: Lots of people think that SSIS is all about arranging various operations together in one logical flow. Well, the understanding is absolutely correct, but the implementation of the same is not as easy as it seems. Similarly most of the people think lookup component is just component which does look up for additional information and does not pay much attention to it. Due to the same reason they do not pay attention to the same and eventually get very bad performance. Linchpin People are database coaches and wellness experts for a data driven world. In this 28th episode of the Notes from the Fields series database expert Tim Mitchell (partner at Linchpin People) shares very interesting conversation related to how to write a good lookup component with Cache Mode. In SQL Server Integration Services, the lookup component is one of the most frequently used tools for data validation and completion.  The lookup component is provided as a means to virtually join one set of data to another to validate and/or retrieve missing values.  Properly configured, it is reliable and reasonably fast. Among the many settings available on the lookup component, one of the most critical is the cache mode.  This selection will determine whether and how the distinct lookup values are cached during package execution.  It is critical to know how cache modes affect the result of the lookup and the performance of the package, as choosing the wrong setting can lead to poorly performing packages, and in some cases, incorrect results. Full Cache The full cache mode setting is the default cache mode selection in the SSIS lookup transformation.  Like the name implies, full cache mode will cause the lookup transformation to retrieve and store in SSIS cache the entire set of data from the specified lookup location.  As a result, the data flow in which the lookup transformation resides will not start processing any data buffers until all of the rows from the lookup query have been cached in SSIS. The most commonly used cache mode is the full cache setting, and for good reason.  The full cache setting has the most practical applications, and should be considered the go-to cache setting when dealing with an untested set of data. With a moderately sized set of reference data, a lookup transformation using full cache mode usually performs well.  Full cache mode does not require multiple round trips to the database, since the entire reference result set is cached prior to data flow execution. There are a few potential gotchas to be aware of when using full cache mode.  First, you can see some performance issues – memory pressure in particular – when using full cache mode against large sets of reference data.  If the table you use for the lookup is very large (either deep or wide, or perhaps both), there’s going to be a performance cost associated with retrieving and caching all of that data.  Also, keep in mind that when doing a lookup on character data, full cache mode will always do a case-sensitive (and in some cases, space-sensitive) string comparison even if your database is set to a case-insensitive collation.  This is because the in-memory lookup uses a .NET string comparison (which is case- and space-sensitive) as opposed to a database string comparison (which may be case sensitive, depending on collation).  There’s a relatively easy workaround in which you can use the UPPER() or LOWER() function in the pipeline data and the reference data to ensure that case differences do not impact the success of your lookup operation.  Again, neither of these present a reason to avoid full cache mode, but should be used to determine whether full cache mode should be used in a given situation. Full cache mode is ideally useful when one or all of the following conditions exist: The size of the reference data set is small to moderately sized The size of the pipeline data set (the data you are comparing to the lookup table) is large, is unknown at design time, or is unpredictable Each distinct key value(s) in the pipeline data set is expected to be found multiple times in that set of data Partial Cache When using the partial cache setting, lookup values will still be cached, but only as each distinct value is encountered in the data flow.  Initially, each distinct value will be retrieved individually from the specified source, and then cached.  To be clear, this is a row-by-row lookup for each distinct key value(s). This is a less frequently used cache setting because it addresses a narrower set of scenarios.  Because each distinct key value(s) combination requires a relational round trip to the lookup source, performance can be an issue, especially with a large pipeline data set to be compared to the lookup data set.  If you have, for example, a million records from your pipeline data source, you have the potential for doing a million lookup queries against your lookup data source (depending on the number of distinct values in the key column(s)).  Therefore, one has to be keenly aware of the expected row count and value distribution of the pipeline data to safely use partial cache mode. Using partial cache mode is ideally suited for the conditions below: The size of the data in the pipeline (more specifically, the number of distinct key column) is relatively small The size of the lookup data is too large to effectively store in cache The lookup source is well indexed to allow for fast retrieval of row-by-row values No Cache As you might guess, selecting no cache mode will not add any values to the lookup cache in SSIS.  As a result, every single row in the pipeline data set will require a query against the lookup source.  Since no data is cached, it is possible to save a small amount of overhead in SSIS memory in cases where key values are not reused.  In the real world, I don’t see a lot of use of the no cache setting, but I can imagine some edge cases where it might be useful. As such, it’s critical to know your data before choosing this option.  Obviously, performance will be an issue with anything other than small sets of data, as the no cache setting requires row-by-row processing of all of the data in the pipeline. I would recommend considering the no cache mode only when all of the below conditions are true: The reference data set is too large to reasonably be loaded into SSIS memory The pipeline data set is small and is not expected to grow There are expected to be very few or no duplicates of the key values(s) in the pipeline data set (i.e., there would be no benefit from caching these values) Conclusion The cache mode, an often-overlooked setting on the SSIS lookup component, represents an important design decision in your SSIS data flow.  Choosing the right lookup cache mode directly impacts the fidelity of your results and the performance of package execution.  Know how this selection impacts your ETL loads, and you’ll end up with more reliable, faster packages. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSIS

    Read the article

  • XP Mode ODBC Connection Problem

    - by Nelson Muniz
    I have just installed XP Mode on our Windows 7 Computer. I need XP Mode because we have a legacy accounting program that doesn't run in Windows 7. The problem we are having is that when I run the accounting program in XP Mode it starts but then reports a connection problem. I understand that is a problem with the ODBC connection. I there any way that I can correct this? I will really appreciate you help....

    Read the article

  • Expired Windows XP and Safe Mode

    - by Sphynx
    I thought it's possible to run expired Windows in Safe Mode. However, Windows has expired and I'm getting the following message trying to log-in in SF: "This copy of windows must be activated with Microsoft before you can continue. Because activation cannot occur in safe mode, please restart the computer in normal mode to activate windows.". Does every version of XP behave like that? Is there any way around?

    Read the article

  • Can't avoid starting macbook in safe mode

    - by Aaron Brown
    I recently spilled some water on my MacBook (mid-2010) keyboard and it shorted out several of the keys. Notably, control and left option don't work, and the system thinks that the left shift is permanently held down. I plugged in an external USB keyboard and all keys work fine; there's only one problem: The computer always starts in safe mode because the shift key is held down. I've tried holding down other keys (escape, space, c to name a few) and the control key doesn't work so I can't try that. I also tried KeyRemap4Macbook but it doesn't work in safe mode and it doesn't seem to help on startup for me. I can log in to Windows with no problems (with rEFIt) and I can browse the internet with no problems, but I can't program on the Mac OS side in safe mode (it's really slow). Which is mainly what I use this Macbook for. Any ideas out there on how to avoid starting in safe mode?

    Read the article

  • Firefox: box mode?

    - by Peter Mortensen
    What is the "box mode" (for a lack of a better word) in Firefox? How can I exit it again? If I hold down the Ctrl key and left click while the cursor is over some element on a page it becomes boxed: Firefox seems to go into some special mode. What is this mode for? How can I go back to normal mode? Installed add-ons in Firefox: BetterPrivacy 1.29, NoScript 1.9.0.6 and SQLite Manager 0.4.7. (Microsoft .NET Framework Assistent 1.0 is disabled.) Platform: Firefox 3.0.6, Windows XP 64 bit SP2, 8 GB RAM.

    Read the article

  • restoring windows xp mode

    - by confusedAgain
    i have widows seven ultimate install on my laptop but use xp mode for many applications on it, is it possible to return an application in xp mode to an earlier restore point in just xp mode or does the host machine need to be restored i do not wish to make any changes on the host but require to either re install windows virtual pc and all the applications and upgrade them slowly to the point my application fails or restore the applications back? any advise on this will be grately recieved

    Read the article

  • XP Mode as a server, Win 7 as a client

    - by Spyro
    I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

    Read the article

  • Can't connect to VPN in Windows XP mode

    - by darkstar13
    I have Windows 7 x32 installed on my laptop. I have also Windows XP mode installed. My setup is that my work-remote programs are in Windows XP mode because my VPN installer in Windows XP only. Lately, I have been having troubles getting on / logging in to VPN. I can access the internet in WinXP mode but When I ping the IP address of the target IP of my VPN network (or even just Google.com), I always get a 'Request Timeout'. However, when I ping the same IP address in command prompt in Windows 7, I get 100% data sent. Is there anything I need to adjust? Before, I have been able to connect instantly. Now, it's like trial and error, or I will have to wait for hours just to be able to enter logon credentials in Cisco VPN dialer. NAT is my network adapter in XP mode.

    Read the article

  • Windows 7 XP Mode-Program not ending properly

    - by iceman33
    We currently have recently have implemented a few new machines to our network with Windows 7 Enterprise 64-bit installed on them. We have a program that is incompatible with Windows 7 right now and we have it installed on the Windows XP Mode that we have setup on there. There is a shortcut that is on the desktop to have it work with integration services and that part is working successfully. Occasionally, this program will stop working over the server on which it connects to has to get rebooted and the program has to get closed out. However, that process that is in the task manager doesn't seem to close out properly. So in order to correctly get the program shut down, we have to make the users log back into xp mode and do a Ctrl+Alt+Delete to kill the process or have to go back into the machine to perform a restart. I was wondering if anyone has come across a way within XP Mode yet that when the virtual machine goes into hibernation mode that it would shut down all processes or if when restarting the virtual machine your normal machine that it would shut everything down in the virtual XP mode as well and not just keep that program running? Any help would be greatly appreciated.

    Read the article

  • PC will be turned off in safe mode

    - by abbasi
    I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

    Read the article

  • Creating an app shortcut in Windows 7 XP Mode

    - by MT_Head
    I have a VERY old legacy app that I've managed to move from machine to machine; the installer for it doesn't actually work under newer versions of Windows, but I was able to track down the registry changes and DLL registrations necessary to make it work. I'm able to create a desktop icon in my XP mode environment, and the program works... but I'd like to add an icon to the Windows 7 menu, and run the program in semi-native mode. For example, the icon for Microsoft Security Essentials in XP mode has the following target: %SystemRoot%\system32\rundll32.exe %SystemRoot%\system32\VMCPropertyHandler.dll,LaunchVMSal "Windows XP Mode" "||232f633" "Microsoft Security Essentials" Now, the only part of that that seems to be "magic" is "||232f633" - does anyone have any idea where that comes from, or how to identify the correct equivalent for an arbitrary program? I gather that, had the program been installed normally through a .msi file (or WISE, or NSIS, or what have you), this id would have been generated automagically... Thanks for any insights!

    Read the article

  • Test and Report Add-on Compatibility in Firefox

    - by Asian Angel
    Now that the new version of Firefox is out you probably have a favorite extension or two that has not updated yet. You can get that extension working again, test it, and report back to Mozilla on how well it does with the Add-on Compatibility Reporter extension. Before For our example we chose a great extension that unfortunately has not been updated yet. As you can see here Firefox is refusing to let the extension install. After As soon as you install Add-on Compatibility Reporter you will be presented with an information page on how the extension works and what you can do with it. You should definitely take a moment to read this as it is very helpful. After trying our non-compatible extension again we were able to proceed with the install process. Notice at the bottom that “compatibility checking” has been overridden. Success! As soon as we restarted our browser it was easy to see the “non-compatible icon” in the “Add-ons Manager Window”…but the extension did install though (terrific!). Clicking on the extension’s entry will reveal a new button in the lower right corner. Using the “Compatibility Drop-Down Menu” you can report if the extension is working as well as before or if it is actually having problems. The extension that we used for our example had no problems whatsoever so good news there. Whichever option you choose you will be presented with a small “Report Window” with information about the extension, your browser’s version number, and your operating system. Click “Submit Report” to send it on its’ way. You will see a confirmation message letting you know that your report was successfully submitted. While the extension itself has not been altered in any form at least you have it working again and have helped verify whether it still works well or not. Notice the “notation” present now in place of the “Compatibility Button” that lets you know that you have already taken care of that particular extension. Looking great… Conclusion If you have a favorite extension that you miss using in the newest release of Firefox then this is definitely an extension to add to your browser. Not only will your extension start working again but you can let Mozilla know how well it is working and (hopefully) help get the extension updated. Links Download the Add-on Compatibility Reporter extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible ExtensionsUsing Windows 7 or Vista Compatibility ModeMysticgeek Blog: Generate A System Health Report In VistaCheck Extension Compatibility for Upcoming Firefox ReleasesMake Safari Stop Crashing Every 20 Seconds on Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • LDoms and Maintenance Mode

    - by Owen Allen
     I got a few questions about how maintenance mode works with LDoms. "I have a Control Domain that I need to do maintenance on. What does being put in maintenance mode actually do for a Control Domain?" Maintenance mode is what you use when you're going to be shutting a system down, or otherwise tinkering with it, and you don't want Ops Center to generate incidents and notification of incidents. Maintenance mode stops new incidents from being generated, but it doesn't stop polling, or monitoring, the system and it doesn't prevent alerts. "What does maintenance mode do with the guests on a Control Domain?" If you have auto recovery set and the Control Domain is a member of a server pool of eligible systems, putting the Control Domain in maintenance mode automatically migrates guests to an available Control Domain.  When a Control Domain is in maintenance mode, it is not eligible to receive guests and the placement policies for guest creation and for automatic recovery won't select this server as a possible destination. If there isn't a server pool or there aren't any eligible systems in the pool, the guests are shut down. You can select a logical domain from the Assets section to view the Dashboard for the virtual machine and the Automatic Recovery status, either Enabled or Disabled. To change the status, click the action in the Actions pane. "If I have to do maintenance on a system and I do not want to initiate auto-recovery, what do I have to do so that I can manually bring down the Control Domain (and all its Guest domains)?" Use the Disable Automatic Recovery action. "If I put a Control Domain into maintenance mode, does that also put the OS into maintenance mode?" No, just the Control Domain server. You have to put the OS into maintenance mode separately. "Also, is there an easy way to see what assets are in maintenance mode? Can we put assets into, or take them out of, maintenance mode on some sort of group level?" You can create a user-defined group that will automatically include assets in maintenance mode. The docs here explain how to set up these groups. You'll use a group rule that looks like this:

    Read the article

  • How to activate Win XP from Windows 7 compatibility mode on MacOS Parallels 5

    - by Ben Hammond
    I am running Parallels Desktop 5.0.9344 for Mac. I am running Mac OS 10.6.3 10D2094 I have bought a retail copy of Window 7 professional specifically because I need the XP compatibility. Windows 7 is installed and working. I have problems with the XP activation Windows7 'Virtual PC' does not run under Parallels (strange error about Server Execution failed 0x80080005). I have used the Parallels Transporter to convert the "Windows XP Mode Base.vhd" file into a parallels Virtual Machine. This copy of XP now starts normally, however it records itself as unregistered. There was a KEY.txt file in the same directory as the .vhd file; although this file contains a valid-looking activation key, it does not appear to activate the instance of XP. I have also tried to enter the Win7 activation key; this does not work either. I have tried calling the two phone numbers; an automated system asked me to enter 56 digits through the telephone and then accused me of being a pirate. I believe it may be possible to install Win7 via Bootcamp, start WinXP under Virtual PC, activate it and then import this activated .vhd into Parallels; but that seems a long way round, and is far from certain. What can I do to get WinXP running under Mac Parallels Desktop ?

    Read the article

  • Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

    - by F.L.
    My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

    Read the article

  • Is there a 2003 compatibility setting in Visual Studio 2008 (compiler compatibility, not project / s

    - by Knarf Navillus
    Hello, I have a Visual Studio 2003 solution that I've opened with VS2008, and it converted successfully. However, it won't build because the code contains some things that were acceptable under Visual Studio 2003, but simply don't fly under Visual Studio 2008. Changing the code would be really difficult in my particular situation. Is there a flag or something that I can set which would use 2003-compatible compilation? Cheers, Frank

    Read the article

  • windows 7 compatibility windows registry windows xp issue

    - by rajivpradeep
    Hi, I have an application developed in VC++ 2010 , it runs in xp , it also runs in Windows 7 when i check the run in XP mode. When i check the run in xp mode , it sets a string value in HK_LOCAL_USER \Software\microsoft\windowsNT\currentversion\appcompatflags\layers folder , and runs well. When i set the same value in the folder through an application built in VC++ 2010 , it doesn't work why..? are there any other dependencies , that i should look into..?

    Read the article

  • JQuery returns wrong value for IE Compatibility

    - by o-logn
    Hey , I'm using JQuery and there seems to be a problem when I run IE in compatibility mode (and generally any IE less than version 8). I'm trying to use attr("value") for a button control. In IE8, and other browsers, this works fine and the result of this code: alert($(this).attr("value")); is simply the value of set in the button attribute (e.g. Home, Settings, Help etc..) However, when this is run in IE compatibility view, I get the entire HTML as the output value: <SPAN class=ui-button-text>Home</SPAN> This causes my checks to fail. Is there a way to return just the Home section across all browsers? Thanks

    Read the article

  • Problem with dropdown in IE8 Compatibility Mode

    - by bsmith95610
    Hello, I am having a problem with my site in IE8 Compatibility mode. Below is a URL where you get the basic idea of what my websites dropdowns look like. The dropdowns are done in CSS and when you hover over one dropdown the submenu for the dropdown expands under the dropdown to the right of it. It works correctly in Safari, Chrome, Firefox, and normal IE8. But when you go to compatibility mode it isn't working correctly. Any help would be much appreciated. http://jsfiddle.net/h5xZT/28/ Thanks

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >