Search Results

Search found 125 results on 5 pages for 'correlate'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• Expanding on requestaudit - Tracing who is doing what...and for how long

  - by Kyle Hatlestad

  One of the most helpful tracing sections in WebCenter Content (and one that is on by default) is the requestaudit tracing.  This tracing section summarizes the top service requests happening in the server along with how they are performing.  By default, it has 2 different rotations.  One happens every 2 minutes (listing up to 5 services) and another happens every 60 minutes (listing up to 20 services).  These traces provide the total time for all the requests against that service along with the number of requests and its average request time.  This information can provide a good start in possibly troubleshooting performance issues or tracking a particular issue.   >requestaudit/6 12.10 16:48:00.493 Audit Request Monitor !csMonitorTotalRequests,47,1,0.39009329676628113,0.21034042537212372,1>requestaudit/6 12.10 16:48:00.509 Audit Request Monitor Request Audit Report over the last 120 Seconds for server wcc-base_4444****requestaudit/6 12.10 16:48:00.509 Audit Request Monitor -Num Requests 47 Errors 1 Reqs/sec. 0.39009329676628113 Avg. Latency (secs) 0.21034042537212372 Max Thread Count 1requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 1 Service FLD_BROWSE Total Elapsed Time (secs) 3.5320000648498535 Num requests 10 Num errors 0 Avg. Latency (secs) 0.3531999886035919 requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 2 Service GET_SEARCH_RESULTS Total Elapsed Time (secs) 2.694999933242798 Num requests 6 Num errors 0 Avg. Latency (secs) 0.4491666555404663requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 3 Service GET_DOC_PAGE Total Elapsed Time (secs) 1.8839999437332153 Num requests 5 Num errors 1 Avg. Latency (secs) 0.376800000667572requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 4 Service DOC_INFO Total Elapsed Time (secs) 0.4620000123977661 Num requests 3 Num errors 0 Avg. Latency (secs) 0.15399999916553497requestaudit/6 12.10 16:48:00.509 Audit Request Monitor 5 Service GET_PERSONALIZED_JAVASCRIPT Total Elapsed Time (secs) 0.4099999964237213 Num requests 8 Num errors 0 Avg. Latency (secs) 0.051249999552965164requestaudit/6 12.10 16:48:00.509 Audit Request Monitor ****End Audit Report***** To change the default rotation or size of output, these can be set as configuration variables for the server: RequestAuditIntervalSeconds1 – Used for the shorter of the two summary intervals (default is 120 seconds)RequestAuditIntervalSeconds2 – Used for the longer of the two summary intervals (default is 3600 seconds)RequestAuditListDepth1 – Number of services listed for the first request audit summary interval (default is 5)RequestAuditListDepth2 – Number of services listed for the second request audit summary interval (default is 20) If you want to get more granular, you can enable 'Full Verbose Tracing' from the System Audit Information page and now you will get an audit entry for each and every service request.  >requestaudit/6 12.10 16:58:35.431 IdcServer-68 GET_USER_INFO [dUser=bob][StatusMessage=You are logged in as 'bob'.] 0.08765099942684174(secs) What's nice is it reports who executed the service and how long that particular request took.  In some cases, depending on the service, additional information will be added to the tracing relevant to that  service. >requestaudit/6 12.10 17:00:44.727 IdcServer-81 GET_SEARCH_RESULTS [dUser=bob][QueryText=%28+dDocType+%3cmatches%3e+%60Document%60+%29][StatusCode=0][StatusMessage=Success] 0.4696030020713806(secs) You can even go into more detail and insert any additional data into the tracing.  You simply need to add this configuration variable with a comma separated list of variables from local data to insert. RequestAuditAdditionalVerboseFieldsList=TotalRows,path In this case, for any search results, the number of items the user found is traced: >requestaudit/6 12.10 17:15:28.665 IdcServer-36 GET_SEARCH_RESULTS [TotalRows=224][dUser=bob][QueryText=%28+dDocType+%3cmatches%3e+%60Application%60+%29][Sta... I also recently ran into the case where services were being called from a client through RIDC.  All of the services were being executed as the same user, but they wanted to correlate the requests coming from the client to the ones being executed on the server.  So what we did was add a new field to the request audit list: RequestAuditAdditionalVerboseFieldsList=ClientToken And then in the RIDC client, ClientToken was added to the binder along with a unique value that could be traced for that request.  Now they had a way of tracing on both ends and identifying exactly which client request resulted in which request on the server.

  Read the article

• The Connected Company: WebCenter Portal - Feedback - Analytics and Polls

  - by Michael Snow

  Evernote Export body, td { }Guest Post by: Mitchell Palski, Staff Sales Consultant The importance of connecting peers has been widely recognized and socialized as a critical component of employee intranets. Organizations are striving to provide mediums for sharing knowledge and improving awareness across their enterprise. Indirectly, the socialization of your enterprise should lead to cost savings and improved product/service quality. However, many times the direct effects of connecting an organization’s leadership with its employees are overlooked. Oracle WebCenter Portal can help you bridge that gap by gathering implicit and explicit feedback. Implicit Feedback Through Usage Analytics Analytics allows administrators to track and analyze WebCenter Portal traffic and usage. Analytics provides the following basic functionality: Usage Tracking Metrics: Analytics collects and reports metrics of common WebCenter Portal functions, including community and portlet traffic. Behavior Tracking: Analytics can be used to analyze WebCenter Portal metrics to determine usage patterns, such as page visit duration and usage over time. User Profile Correlation: Analytics can be used to correlate metric information with user profile information. Usage tracking reports can be viewed and filtered by user profile data such as country, company or title. Usage analytics help measure how users interact with website content – allowing your IT staff and business analysts to make informed decisions when planning development for your next intranet enhancement. For example: If users are not accessing your Announcements page and missing critical information that they need to be aware of, you may elect to use graphical links on the home page to direct more users to that page. As a result, the number of employee help-requests to HR decreases. If users are not accessing your News page to read recent articles, you may elect to stop spending as much time updating the page with new stories and cut costs in your communications department. You notice that there is a high volume of users accessing the Employee Dashboard page so your organization decides to continue making personalization enhancements to the page and investing in the Portal tool that most users are accessing. Usage analytics aren’t necessarily a new concept in the IT industry. What sets WebCenter Portal Analytics apart is: Reports are tailored for WebCenter specific tools Report can be easily added to a page as simple as a drag-and-drop Explicit Feedback Through Polls WebCenter Portal users can create, edit, take, and analyze online polls. With polls, you can survey your audience (such as their opinions and their experience level), check whether they can recall important information, and gather feedback and metrics. How many times have you been involved in a requirements discussion and someone has asked a question similar to “Well how do you know that no one likes our home page?” and the response is “Everyone says they hate it! That’s all anyone complains about.” No one has any measurable, quantifiable metric to gauge user satisfaction. Analytics measure usage, but your organization also needs to measure the quality of your portal as defined by the actual people that use it. With that information, your leadership can make informed decisions that will not only match usage patterns but also relate to employees on a personal level. The end result is a connection between employees and leadership that gives everyone in the organization a sense of ownership of their Portal rather than the feeling of development decisions being segregated to leadership only. Polls can be created and edited through the Poll Manager: Polls and View Poll Results can easily be added to a page through drag-and-drop. What did we learn? Being a “connected” company doesn’t just mean helping employees connect with each other horizontally across your enterprise. It also means connecting those employees to the decisions that affect their everyday activities. Through WebCenter Portal Usage Analytics and Polls, any decision that is made to remove a Portal page, update a Portal page, or develop new Portal functionality, can be justified by quantifiable metrics. Instead of fielding complaints and hearing that your employees don’t have a voice, give those employees a voice and listen!

  Read the article

• Resolving collisions between dynamic game objects

  - by TheBroodian

  I've been building a 2D platformer for some time now, I'm getting to the point where I am adding dynamic objects to the stage for testing. This has prompted me to consider how I would like my character and other objects to behave when they collide. A typical staple in many 2D platformer type games is that the player takes damage upon touching an enemy, and then essentially becomes able to pass through enemies during a period of invulnerability, and at the same time, enemies are able to pass through eachother freely. I personally don't want to take this approach, it feels strange to me that the player should receive arbitrary damage for harmless contact to an enemy, despite whether the enemy is attacking or not, and I would like my enemies' interactions between each other (and my player) to be a little more organic, so to speak. In my head I sort of have this idea where a game object (player, or non player) would be able to push other game objects around by manner of 'pushing' each other out of one anothers' bounding boxes if there is an intersection, and maybe correlate the repelling force to how much their bounding boxes are intersecting. The problem I'm experiencing is I have no idea what the math might look like for something like this? I'll show what work I've done so far, it sort of works, but it's jittery, and generally not quite what I would pass in a functional game: //Clears the anti-duplicate buffer collisionRecord.Clear(); //pick a thing foreach (GameObject entity in entities) { //pick another thing foreach (GameObject subject in entities) { //check to make sure both things aren't the same thing if (!ReferenceEquals(entity, subject)) { //check to see if thing2 is in semi-near proximity to thing1 if (entity.WideProximityArea.Intersects(subject.CollisionRectangle) || entity.WideProximityArea.Contains(subject.CollisionRectangle)) { //check to see if thing2 and thing1 are colliding. if (entity.CollisionRectangle.Intersects(subject.CollisionRectangle) || entity.CollisionRectangle.Contains(subject.CollisionRectangle) || subject.CollisionRectangle.Contains(entity.CollisionRectangle)) { //check if we've already resolved their collision or not. if (!collisionRecord.ContainsKey(entity.GetHashCode())) { //more duplicate resolution checking. if (!collisionRecord.ContainsKey(subject.GetHashCode())) { //if thing1 is traveling right... if (entity.Velocity.X > 0) { //if it isn't too far to the right... if (subject.CollisionRectangle.Contains(new Microsoft.Xna.Framework.Rectangle(entity.CollisionRectangle.Right, entity.CollisionRectangle.Y, 1, entity.CollisionRectangle.Height)) || subject.CollisionRectangle.Intersects(new Microsoft.Xna.Framework.Rectangle(entity.CollisionRectangle.Right, entity.CollisionRectangle.Y, 1, entity.CollisionRectangle.Height))) { //Find how deep thing1 is intersecting thing2's collision box; float offset = entity.CollisionRectangle.Right - subject.CollisionRectangle.Left; //Move both things in opposite directions half the length of the intersection, pushing thing1 to the left, and thing2 to the right. entity.Velocities.Add(new Vector2(-(((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); subject.Velocities.Add(new Vector2((((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); } } //if thing1 is traveling left... if (entity.Velocity.X < 0) { //if thing1 isn't too far left... if (entity.CollisionRectangle.Contains(new Microsoft.Xna.Framework.Rectangle(subject.CollisionRectangle.Right, subject.CollisionRectangle.Y, 1, subject.CollisionRectangle.Height)) || entity.CollisionRectangle.Intersects(new Microsoft.Xna.Framework.Rectangle(subject.CollisionRectangle.Right, subject.CollisionRectangle.Y, 1, subject.CollisionRectangle.Height))) { //Find how deep thing1 is intersecting thing2's collision box; float offset = subject.CollisionRectangle.Right - entity.CollisionRectangle.Left; //Move both things in opposite directions half the length of the intersection, pushing thing1 to the right, and thing2 to the left. entity.Velocities.Add(new Vector2((((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); subject.Velocities.Add(new Vector2(-(((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); } } //Make record that thing1 and thing2 have interacted and the collision has been solved, so that if thing2 is picked next in the foreach loop, it isn't checked against thing1 a second time before the next update. collisionRecord.Add(entity.GetHashCode(), subject.GetHashCode()); } } } } } } } } One of the biggest issues with my code aside from the jitteriness is that if one character were to land on top of another character, it very suddenly and abruptly resolves the collision, whereas I would like a more subtle and gradual resolution. Any thoughts or ideas are incredibly welcome and helpful.

  Read the article

• Customer Loyalty vs. Customer Engagement: Who Cares?

  - by Jeb Dasteel-Oracle

  Have you read the recent Forbes OracleVoice blog titled Customer Loyalty is Dead. Long Live Engagement!? If you haven’t, take a look. This article prompted lots of conversation in the social realm. Many who read the article voiced their reactions to the headline and now I’m jumping in to add my view. Normal 0 false false false EN-US X-NONE X-NONE Customer loyalty is still key. It’s the effect and engagement is the cause. We at least know that to be true for our customers. We are in an age where customers are demanding to be heard. We need them to be actively involved – or engaged – as well. Greater levels of customer engagement, properly targeted, positively correlate with satisfaction. Our data has shown us this over and over. Satisfied customers are more loyal and more willing to vocalize their satisfaction through referencing, and are more likely to purchase again, all of which in turn drives incremental revenue – from the customer doing the referencing AND the customer on the receiving end of that reference. Turning this around completely, if we begin to see the level of a customer’s engagement start to wane, this is an indicator that their satisfaction, loyalty, and future revenue are likely at risk. At Oracle, we’ve put in place many programs to target, encourage, and then track engagement, allowing us to measure engagement as a determinant of loyalty. Some of these programs include our Key Accounts, solution design and architectural, Executive Sponsorship, as well as executive advisory boards. Specific programs allow us to engage specific contacts within specific customer organizations (based on role) and then systematically track their engagement activities over time, along side of tracking customer satisfaction, loyalty, referenceability, and incremental revenue contribution. Continuous measurement of engagement allows us to better understand customer views of what it means to partner with a provider and adjust program participation to better meet the needs of the partnership. We can also track across customer segments, and design new programs that are even more effective than the ones we have in place today. In case you missed any of my previous Forbes articles, I’ve included links below for easy access. Award-Winning Companies Put Customers First The Power of Peer Networks: 5 Reasons to Get (and Stay) Involved Technology At Work: Traveling In Style Customer Central: 8 Strategies for Putting Customers at the Core of Your Business Technology at Work: Five Companies Doing IT Right /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Using Content Analytics for More Effective Engagement

  - by Kellsey Ruppel

  Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

  Read the article

• Looking for ideas for a simple pattern matching algorithm to run on a microcontroller

  - by pic_audio

  I'm working on a project to recognize simple audio patterns. I have two data sets, each made up of between 4 and 32 note/duration pairs. One set is predefined, the other is from an incoming data stream. The length of the two strongly correlated data sets is often different, but roughly the same "shape". My goal is to come up with some sort of ranking as to how well the two data sets correlate/match. I have converted the incoming frequencies to pitch and shifted the incoming data stream's pitch so that it's average pitch matches that of the predefined data set. I also stretch/compress the incoming data set's durations to match the overall duration of the predefined set. Here are two graphical examples of data that should be ranked as strongly correlated: http://s2.postimage.org/FVeG0-ee3c23ecc094a55b15e538c3a0d83dd5.gif (Sorry, as a new user I couldn't directly post images) I'm doing this on a 8-bit microcontroller so resources are minimal. Speed is less an issue, a second or two of processing isn't a deal breaker. It wouldn't surprise me if there is an obvious solution, I've just been staring at the problem too long. Any ideas? Thanks in advance...

  Read the article

• Getting the CVE ID Property of an update from WSUS API via Powershell

  - by thebitsandthebytes

  I am writing a script in Powershell to get the update information from each computer and correlate the information with another System which identifies updates by CVE ID. I have discovered that there is a "CVEIDs" property for an update in WSUS, which is documented in MSDN, but I have no idea how to access the property. Retrieving the CVE ID from WSUS is the key to this script, so I am hoping someone out there can help! Here is the property that I am having difficulty accessing: IUpdate2::CveIDs Property - http://msdn.microsoft.com/en-us/library/aa386102(VS.85).aspx According to this, the IUnknown::QueryInterface method is needed to interface IUpdate2 -  "http://msdn.microsoft.com/en-us/library/ee917057(PROT.10).aspx" "An IUpdate instance can be retrieved by calling the IUpdateCollection::Item (opnum 8) (section 3.22.4.1) method.  The client can use the IUnknown::QueryInterface method to then obtain an IUpdate2, IUpdate3, IUpdate4, or IUpdate5 interface. Additionally, if the update is a driver, the client can use the IUnknown::QueryInterface method to obtain an IWindowsDriverUpdate, IWindowsDriverUpdate2, IWindowsDriverUpdate3, IWindowsDriverUpdate4, or IWindowsDriverUpdate5 interface. " Here is a skeleton of my code: [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration") | Out-Null  if (!$wsus)  {  Returns an object that implements IUpdateServer  $wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer($server, $false, $port)  }  $computerScope = New-Object Microsoft.UpdateServices.Administration.ComputerTargetScope  $updateScope = New-Object Microsoft.UpdateServices.Administration.UpdateScope  $updateScope.UpdateSources = [Microsoft.UpdateServices.Administration.UpdateSources]::MicrosoftUpdate  $wsusMachines = $wsus.GetComputerTargets($computerScope)  foreach machine in QSUS, write the full domain name $wsusMachines | ForEach-Object {  Write-host $.FullDomainName  $updates = $.GetUpdateInstallationInfoPerUpdate($updateScope)  foreach update for each machine, write the update title, installation state and securitybulletin $updates | ForEach-Object {  $update = $wsus.GetUpdate($.UpdateId) # Returns an object that implements Microsoft.UpdateServices.Administration.IUpdate $updateTitle = $update.Title | Write-Host $updateInstallationState = $.UpdateInstallationState | Write-Host $updateSecurityBulletin = $update.SecurityBulletins | Write-Host  $updateCveIds = $update.CveIDs # ERROR: Property 'CveIDs' belongs to IUpdate2, not IUpdate  }  }

  Read the article

• How to maintain a job history using Quartz scheduler

  - by rwwilden

  I'd like to maintain a history of jobs that were scheduled by a Quartz scheduler containing the following properties: 'start time', 'end time', 'success', 'error'. There are two interfaces available for this: ITriggerListener and IJobListener (I'm using the C# naming convention for interfaces because I'm using Quartz.NET but the same question could be asked for the Java version). IJobListener has a JobToBeExecuted and a JobWasExecuted method. The latter provides a JobExecutionException so that you know when something went wrong. However, there is no way to correlate JobToBeExecuted and JobWasExecuted. Suppose my job runs for ten minutes. I start it at t0 and t0+2 (so they overlap). I get two calls to JobToBeExecuted and insert two start times into my history table. When both jobs finish at t1 and t1+2 I get two calls to JobWasExecuted. How do I know what database record to update in each call (to store an end time with its corresponding start time)? ITriggerListener has another problem. There is no way to get any errors inside the TriggerComplete method when a job failed. How do I get the desired behavior?

  Read the article

• Calling a SLSB with Seam security from a servlet

  - by wilth

  Hello, I have an existing application written in SEAM that uses SEAM Security (http://docs.jboss.org/seam/2.1.1.GA/reference/en-US/html/security.html). In a stateless EJB, I might find something like this: @In Identity identity; ... if(identity.hasRole("admin")) throw new AuthException(); As far as I understand, Seam injects the Identity object from the SessionContext of the servlet that invokes the EJB (this happens "behind the scenes", since Seam doesn't really use servlets) and removes it after the call. Is this correct? Is it now possible to access this EJB from another servlet (in this case, that servlet is the server side of a GWT application)? Do I have to "inject" the correct Identity instance? If I don't do anything, Seam injects an instance, but doesn't correctly correlate the sessions and instances of Identity (so the instances of Identity are shared between sessions and sometimes calls get new instances etc.). Any help and pointers are very welcome - thanks! Technology: EJB3, Seam 2.1.2. The servlets are actually the server-side of a GWT app, although I don't think this matters much. I'm using JBoss 5.

  Read the article

• How to search cvs comment history

  - by Chris Noe

  I am aware of this command: cvs log -N -w<userid> -d"1 day ago" Unfortunately this generates a formatted report with lots of newlines in it, such that the file-path, the file-version, and the comment-text are all on separate lines. Therefore it is difficult to scan it for all occurrences of comment text, (eg, grep), and correlate the matches to file/version. (Note that the log output would be perfectly acceptable, if only cvs could perform the filtering natively.) EDIT: Sample output. A block of text like this is reported for each repository file: RCS file: /data/cvs/dps/build.xml,v Working file: build.xml head: 1.49 branch: locks: strict access list: keyword substitution: kv total revisions: 57; selected revisions: 1 description: ---------------------------- revision 1.48 date: 2008/07/09 17:17:32; author: noec; state: Exp; lines: +2 -2 Fixed src.jar references ---------------------------- revision 1.47 date: 2008/07/03 13:13:14; author: noec; state: Exp; lines: +1 -1 Fixed common-src.jar reference. =============================================================================

  Read the article

• Algorithm detect repeating/similiar strings in a corpus of data -- say email subjects, in Python

  - by RizwanK

  I'm downloading a long list of my email subject lines , with the intent of finding email lists that I was a member of years ago, and would want to purge them from my Gmail account (which is getting pretty slow.) I'm specifically thinking of newsletters that often come from the same address, and repeat the product/service/group's name in the subject. I'm aware that I could search/sort by the common occurrence of items from a particular email address (and I intend to), but I'd like to correlate that data with repeating subject lines.... Now, many subject lines would fail a string match, but "Google Friends : Our latest news" "Google Friends : What we're doing today" are more similar to each other than a random subject line, as is: "Virgin Airlines has a great sale today" "Take a flight with Virgin Airlines" So -- how can I start to automagically extract trends/examples of strings that may be more similar. Approaches I've considered and discarded ('because there must be some better way'): Extracting all the possible substrings and ordering them by how often they show up, and manually selecting relevant ones Stripping off the first word or two and then count the occurrence of each sub string Comparing Levenshtein distance between entries Some sort of string similarity index ... Most of these were rejected for massive inefficiency or likelyhood of a vast amount of manual intervention required. I guess I need some sort of fuzzy string matching..? In the end, I can think of kludgy ways of doing this, but I'm looking for something more generic so I've added to my set of tools rather than special casing for this data set. After this, I'd be matching the occurring of particular subject strings with 'From' addresses - I'm not sure if there's a good way of building a data structure that represents how likely/not two messages are part of the 'same email list' or by filtering all my email subjects/from addresses into pools of likely 'related' emails and not -- but that's a problem to solve after this one. Any guidance would be appreciated.

  Read the article

• Find and Replace with Notepad++

  - by Levi

  I have a document that was converted from PDF to HTML for use on a company website to be referenced and indexed for search. I'm attempting to format the converted document to meet my needs and in doing so I am attempting to clean up some of the junk that was pulled over from when it was a PDF such as page numbers, headers, and footers. luckily all of these lines that need to be removed are in blocks of 4 lines unfortunately they are not exactly the same therefore cannot be removed with a simple literal replace. The lines contain numbers which are incremental as they correlate with the pages. How can I remove the following example from my html file. Title<br> 10<br> <hr> <A name=11></a>Footer<br> I've tried many different regular expression attempts but as my skill in that area is limited I can't find the proper syntax. I'm sure i'm missing something fairly easy as it would seem all I need is a wildcard replace for the two numbers in the code and the rest is literal. any help is apprciated

  Read the article

• Splitting a set of object into several subsets of 'similar' objects

  - by doublep

  Suppose I have a set of objects, S. There is an algorithm f that, given a set S builds certain data structure D on it: f(S) = D. If S is large and/or contains vastly different objects, D becomes large, to the point of being unusable (i.e. not fitting in allotted memory). To overcome this, I split S into several non-intersecting subsets: S = S1 + S2 + ... + Sn and build Di for each subset. Using n structures is less efficient than using one, but at least this way I can fit into memory constraints. Since size of f(S) grows faster than S itself, combined size of Di is much less than size of D. However, it is still desirable to reduce n, i.e. the number of subsets; or reduce the combined size of Di. For this, I need to split S in such a way that each Si contains "similar" objects, because then f will produce a smaller output structure if input objects are "similar enough" to each other. The problems is that while "similarity" of objects in S and size of f(S) do correlate, there is no way to compute the latter other than just evaluating f(S), and f is not quite fast. Algorithm I have currently is to iteratively add each next object from S into one of Si, so that this results in the least possible (at this stage) increase in combined Di size: for x in S: i = such i that size(f(Si + {x})) - size(f(Si)) is min Si = Si + {x} This gives practically useful results, but certainly pretty far from optimum (i.e. the minimal possible combined size). Also, this is slow. To speed up somewhat, I compute size(f(Si + {x})) - size(f(Si)) only for those i where x is "similar enough" to objects already in Si. Is there any standard approach to such kinds of problems? I know of branch and bounds algorithm family, but it cannot be applied here because it would be prohibitively slow. My guess is that it is simply not possible to compute optimal distribution of S into Si in reasonable time. But is there some common iteratively improving algorithm?

  Read the article

• Auto scale and rotate images

  - by Dave Jarvis

  Given: two images of the same subject matter; the images have the same resolution, colour depth, and file format; the images differ in size and rotation; and two lists of (x, y) co-ordinates that correlate the images. I would like to know: How do you transform the larger image so that it visually aligns to the second image? (Optional.) What are the minimum number of points needed to get an accurate transformation? (Optional.) How far apart do the points need to be to get an accurate transformation? The transformation would need to rotate, scale, and possibly shear the larger image. Essentially, I want to create (or find) a program that does the following: Input two images (e.g., TIFFs). Click several anchor points on the small image. Click the several corresponding anchor points on the large image. Transform the large image such that it maps to the small image by aligning the anchor points. This would help align pictures of the same stellar object. (For example, a hand-drawn picture from 1855 mapped to a photograph taken by Hubble in 2000.) Many thanks in advance for any algorithms (preferably Java or similar pseudo-code), ideas or links to related open-source software packages.

  Read the article

• Mysterious HttpSession and session-config dependency

  - by OneMoreVladimir

  Good day. I'm developing a Java web app with Servlets\JSP using Tomcat 7.0. During request from client I put and object into the session and use forward. After the forward processing the same request the object can be retreived if the secure parameter is false otherwise it is not stored in session. <session-config> <session-timeout>15</session-timeout> <cookie-config> <http-only>true</http-only> <secure>true</secure> </cookie-config> <tracking-mode>COOKIE</tracking-mode> </session-config> I've figured out that "...cookies can be created with the 'secure' flag, which ensures that the browser will never transmit the specified cookie over non-SSL...". I've configured Tomcat to use SSL, but that haven't helped. Changing the tracking mode to SSL haven't helped as well. How do session-config and HttpSession object correlate in this case? What could be the problem?

  Read the article

• Server load spikes several times a day, load average for the past month is 5 times the load average all year

  - by AMF

  My Munin notifications set up for our (Debian) LAMP cluster have been notifying me continuously that our load on our production machine has been at dangerous levels. While the average load all year typically runs between 2 and 8, the load in the past month and only the past month -- has been skyrocketing to 10, 18, and occasionally even 50-60. The spikes last only 5-10 minutes at a time and occur about every 2-3 hours. The spikes do not effect performance only because I have a script that sends traffic off our server to a mirror CDN when the load goes above 10. I've looked for cron jobs that correlate with this timeframe but there is nothing I can see that would cause this. Site traffic is also normal (we receive about 200K visits per day). I'm also trying to think of anything I've changed around the time this problem began, and I really cannot think of anything. This is probably not much to go on. Maybe there is a clue in the top print-out (below) that I'm not seeing. How do I proceed to find the cause? -- Typical top when the load is NOT spiking: top - 11:13:09 up 472 days, 25 min, 1 user, load average: 6.08, 4.29, 3.80 Tasks: 105 total, 1 running, 104 sleeping, 0 stopped, 0 zombie Cpu(s): 41.2%us, 5.8%sy, 0.0%ni, 49.5%id, 2.7%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 3369592k total, 2166980k used, 1202612k free, 559504k buffers Swap: 2650684k total, 1892k used, 2648792k free, 1129116k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32046 apache 15 0 36300 12m 9828 S 20 0.4 0:01.97 apache2 32679 apache 15 0 36568 13m 10m S 19 0.4 0:01.69 apache2 31441 apache 15 0 36616 13m 10m S 19 0.4 0:04.13 apache2 31477 apache 15 0 36596 13m 9.8m S 15 0.4 0:01.99 apache2 31993 apache 15 0 36876 16m 12m S 12 0.5 0:02.01 apache2 31782 apache 15 0 36836 14m 10m S 8 0.4 0:02.17 apache2 32198 apache 15 0 36536 13m 10m S 7 0.4 0:01.59 apache2 880 apache 15 0 36508 9708 6236 S 7 0.3 0:00.42 apache2 31945 apache 17 0 36876 16m 13m S 5 0.5 0:03.17 apache2 32197 apache 16 0 36636 10m 7504 S 5 0.3 0:02.70 apache2 32326 apache 15 0 37024 11m 7632 S 5 0.3 0:02.15 apache2 32565 apache 15 0 37280 13m 9.8m S 5 0.4 0:03.75 apache2 32676 apache 15 0 36896 16m 12m S 4 0.5 0:00.95 apache2 32678 apache 15 0 36536 12m 9692 S 4 0.4 0:02.27 apache2 974 apache 16 0 37064 9888 6016 D 4 0.3 0:00.13 apache2 32150 apache 16 0 36832 13m 10m S 3 0.4 0:01.74 apache2 31780 apache 16 0 36848 11m 7660 S 3 0.3 0:02.87 apache2

  Read the article

• AS11 Oracle B2B Sync Support - Series 2

  - by sinkarbabu.kirubanithi

  In the earlier series, we discussed about how to model "Sync Support" in Oracle B2B. And, we haven't discussed how the response can be consumed synchronously by the back-end application or initiator of sync request. In this sequel, we will see how we can extend it to the SOA composite applications to model the end-to-end usecase, this would help the initiator of sync request to receive the response synchronously. Series 2 - is little lengthier for blog standards so be prepared before you continue further :). Let's start our discussion with a high-level scenario where one need to initiate a synchronous request and get response synchronously. There are various approaches available, we will see one simplest approach here. Components Involved: 1. Oracle B2B 2. Oracle JCA JMS Adapter 3. Oracle BPEL 4. All of the above are wrapped up in a single SOA composite application. Oracle B2B: Skipping the "Sync Support" setup part in B2B, as we have already discussed that in the earlier series 1. Here we have provided "Sync Support" samples that can be imported to B2B directly and users can start testing the same in few minutes. Initiator Sample: This requires two JMS queues to be created, one for B2B to receive initial outbound sync request and the other is for B2B to deliver the incoming sync response to the back-end. Please enable "Use JMS Id" option in both internal listening and delivery channels. This would enable JCA JMS Adapter to correlate the initial B2B request and response and in turn it would be returned as synchronous response of BPEL. Internal Listening Channel Image: Internal Delivery Channel Image: To get going without much challenges, just create queues in Weblogic with the JNDI mentioned in the above two screenshots. If you want to use different names, then you may have to change the queue jndi names in sample after importing it into B2B. Here are the Queue related JNDI names used in the sample, 1. Internal Listening Channel Queue details, Name: JNDI Name: jms/b2b/syncreplyqueue 2. Internal Delivery Channel Queue details, Name: JNDI Name: jms/b2b/syncrequestqueue Here is the Initiator Sample Acme.zip Note: You may have to adjust the ip address of GlobalChips endpoint in the Delivery Channel. Responder Sample: Contains B2B meta-data and the Callout. Just import the sample and place the callout binary under "/tmp/callout" directory. If you choose to use a different location for callout, then you may have to change the same in B2B Configuration after importing the sample. Here are the artifacts, 1. Callout Source SampleCallout.java 2. Callout Binary sample-callout.jar 3. Responder Sample GlobalChips.zip Callout Details: Just gives the static response XML that needs to be sent back as response for the inbound sync request. For a sample purpose, we have given static response but in production you may have to invoke a web service or something similar to get the response. IMPORTANT NOTE: For Sync Support use case, responder is not expected to deliver the inbound sync request to backend as the process of delivering and getting the response from backend are expected from the Callout. This default behavior can be overridden by enabling the config property "b2b.SyncAppDelivery=true" in B2B config mbean (b2b-config.xml). This makes B2B to deliver the inbound sync request to be delivered to backend queue but the response to be sent to remote caller still has to come from Callout. 2. Oracle JCA JMS Adapter: On the initiator side, we have used JCA JMS Request/Reply pattern to send/receive the synchronous message from B2B. 3. Oracle BPEL: Exposes WS-SOAP Endpoint that takes payload as input and passes the same to B2B and returns the synchronous response of B2B as SOAP response. For outside world, it looks as if it is the synchronous web service endpoint but under the cover it uses JMS to trigger/initiate B2B to send and receive the synchronous response. 4. Composite application: All the components discussed above are wired in SOA composite application that helps to model a end-to-end synchronous use case. Here's the composite application sca_B2BSyncSample_rev1.0.jar, you may just deploy this to your AS11 SOA to make use of it. For any editing, you can just import the project in your JDEV under any SOA Application. Here are the composite application screenshots, Composite Application: BPEL With JCA JMS Adapter (Request/Reply):

  Read the article

• Monitoring almost anything with BizTalk 360

  - by Michael Stephenson

  When you work in an integration environment it is common that you will find yourself in a situation where you integrate with some unusual applications or have some unusual dependencies. That is the nature of integration. When you work with BizTalk one of the common problems is that BizTalk often is the place where problems with applications you integrate with are highlighted and these external applications may have poor monitoring solutions. Fortunately if you are a working with a customer who uses BizTalk 360 then it contains a feature called the "Web Endpoint Manager". Typically the web endpoint manager is used to monitor web services that you integrate with and will ping them at appropriate times to make sure they return the expected HTTP status code. When you have an usual situation where you want to monitor something which is key to the success to your solution but you find yourself having to consider a significant custom solution to monitor the external dependency then the Web Endpoint Manager could be your friend. The endpoint manager monitors a url and checks for a certain status code. This means that you can create your own aspx web page and then make BizTalk 360 monitor this web page. Behind the web page you could write any code you wished. An example of this is architecture is shown in the below diagram.     In the custom web page you would implement some custom code to do whatever it is that you want to monitor. In the below code snippet you can see how the Page_Load default method is doing some kind of check then depending on the result of the check it returns a certain HTTP code. protected void Page_Load(object sender, EventArgs e) { var result = CheckSomething();   if (result == "Success") Response.StatusCode = 202; else if (result == "DatabaseError") Response.StatusCode = 510; else if (result == "SystemError") Response.StatusCode = 512; else Response.StatusCode = 513;   }   In BizTalk 360 you would go into the Monitor and Notify tab and then to BizTalk Environment which gives you access to the Web Endpoint Manager. You need an alarm setup which configures how the endpoint will be checked. I'm not going to go through the details of creating the alarm as this is already documented in the BizTalk 360 documentation. One point to note is that in the example I am using I setup a threshold alarm which means that the url is checked about every minute and if there is an error that persists for a period of time then the alarm will raise the alert notification. In my example I configured the alarm to fire if the error persisted for 3 minutes. The below picture shows accessing the endpoint manager.   In the web endpoint manager you would then configure your endpoint to monitor and the HTTP response code which indicates all is working fine. The below picture shows this. I now have my endpoint monitoring setup and BizTalk 360 should be checking my custom endpoint to see that it is available. If I wanted to manually sanity check that the endpoints I have registered are working fine then clicking the Refresh button will show if they are all good or not. If my custom ASP.net page which is checking my dependency gets a problem you will see in the endpoint manager that the status code does not match the expected return code and your endpoints will display in red and you can see the problem. The below picture shows this. If I use specific HTTP response codes for the errors the custom ASP.net page might encounter I can easily interpret these to know what the problem is. Using the alarms and notifications with BizTalk 360 it means when your endpoint goes into an error state you can easily configure email or SMS notifications from BizTalk 360 to tell you that your endpoint is having problems and you can use BizTalk 360 to help correlate what the problem is to allow you to investigate further. Below you can see the email which tells me my endpoint is not working.   When everything returns to normal you will see the status is now fixed and you will see a situation like below where you can see the WebEndpoints are now green and the return code matches what is expected.   Conclusion As you can see it is really easy to plug your own custom ASP.net page into the BizTalk 360 web endpoint monitoring feature. This extension then gives you the power to really extend the monitoring to almost anything you want as long as you can write some .net code to check that the dependency is available and working. It would be interesting to hear of any ideas people have around things they would monitor with this extension. More details on the end point monitor can be found on the following link: http://www.biztalk360.com/tour/monitoring_notifications

  Read the article

• How do I consistently re-size my game window and elements?

  - by Milo

  In my 2D game, I have a flow layout. Inside the flow layout are tables. I have a slider that lets the user make the tables larger or smaller. This makes the background larger or smaller too. Everything should scale proportionally which means the background should stay at the same position when I make things larger, and it almost does. When the scrollbar is at 0, it does exactly this. As the scrollbar gets further down problems arise. I'll toggle the slider maybe 3 times and on the fourth time, the background jumps a little lower on the Y axis. In order to be efficient, I only start rendering the background near the parent of the flow layout. Here it is: void LobbyTableManager::renderBG( GraphicsContext* g, agui::Rectangle& absRect, agui::Rectangle& childRect ) { int cx, cy, cw, ch; g->getClippingRect(cx,cy,cw,ch); g->setClippingRect(absRect.getX(),absRect.getY(),absRect.getWidth(),absRect.getHeight()); float scale = 0.35f; int w = m_bgSprite->getWidth() * getTableScale() * scale; int h = m_bgSprite->getHeight() * getTableScale() * scale; int numX = ceil(absRect.getWidth() / (float)w) + 2; int numY = ceil(absRect.getHeight() / (float)h) + 2; float offsetX = m_activeTables[0]->getLocation().getX() - w; float offsetY = m_activeTables[0]->getLocation().getY() - h; int startY = childRect.getY(); if(moo) { std::cout << "S=" << startY << ","; } int numAttempts = 0; while(startY + h < absRect.getY() && numAttempts < 1000) { startY += h; if(moo) { std::cout << startY << ","; } numAttempts++; } if(moo) { std::cout << "\n"; moo = false; } g->holdDrawing(); for(int i = 0; i < numX; ++i) { for(int j = 0; j < numY; ++j) { g->drawScaledSprite(m_bgSprite,0,0,m_bgSprite->getWidth(),m_bgSprite->getHeight(), absRect.getX() + (i * w) + (offsetX),absRect.getY() + (j * h) + startY,w,h,0); } } g->unholdDrawing(); g->setClippingRect(cx,cy,cw,ch); } The numeric problem seems to be in the value of startY. I outputted startY figuring out its value: As you can see here, this is me only zooming in, pay attention to the final number before the next s=. You'll notice that, what should happen is, the numbers should be linear, ex: -40, -38, -36, -34, -32, -30, etc. As you'll notice, the start numbers linearly correlate ex: 62k, 64k, 66k, 68k, 70k etc.. but the end result is wrong every third or 4th time. Here is most of the resize code: void LobbyTableManager::setTableScale( float scale ) { scale += 0.3f; scale *= 2.0f; agui::Gui* gotGui = getGui(); float scrollRel = m_vScroll->getRelativeValue(); setScale(scale); rescaleTables(); resizeFlow(); if(gotGui) { gotGui->toggleWidgetLocationChanged(false); } updateScrollBars(); float newVal = scrollRel * m_vScroll->getMaxValue(); if((int)(newVal + 0.5f) > (int)newVal) { newVal++; } m_vScroll->setValue(newVal); static int x = 0; x++; moo = true; //std::cout << m_vScroll->getValue() << std::endl; if(gotGui) { gotGui->toggleWidgetLocationChanged(true); } if(gotGui) { gotGui->_widgetLocationChanged(); } } void LobbyTableManager::valueChanged( agui::VScrollBar* source,int val ) { if(getGui()) { getGui()->toggleWidgetLocationChanged(false); } m_flow->setLocation(0,-val); if(getGui()) { getGui()->toggleWidgetLocationChanged(true); getGui()->_widgetLocationChanged(); } }

  Read the article

• Tuning Red Gate: #2 of Many

  - by Grant Fritchey

  In the last installment, I used the SQL Monitor tool to get a snapshot view of the current state of the servers at Red Gate that are giving us trouble. That snapshot suggested some areas where I should focus some time, primarily in which queries were being called most frequently or were running the longest. But, you don't want to just run off & start tuning queries. Remember, the foundation for query tuning is the server itself. So, I want to be sure I'm not looking at some major hardware or configuration issues that I need to address first. Rather than look at the current status of the server, I'm going to look at historical data. Clicking on the Analysis tab of SQL Monitor I get a whole list of counters that I can look at. More importantly, I can look at them over a period of time. Even more importantly, I can compare past periods with current periods to see if we're looking at a progressive issue or not. There are counters here that will give me an indication of load, and there are counters here that will tell me specifics about that load. First, I want to just look at the load to understand where the pain points might be. Trying to drill down before you have detailed information is just bad planning. First thing I'm going to check is the CPU, just to see what's up there. I have two servers I'm interested in, so I'll show you both: Looking at the last 30 days for both servers, well, let's just say that the first server is about what I would expect. It has an average baseline behavior with occasional, regular, peaks. This looks like a system with a fairly steady & predictable load that probably has a nightly batch process that spikes the processor. In short, normal stuff. The points there where the CPU drops radically. that might be worth investigating further because something changed the processing on this system a lot. But the first server. It's all over the place. There's no steady CPU behavior at all. It's spike high for long periods of time. It's up, it's down. I'm really going to have to spend time looking at CPU issues on this server to try to figure out what's up. It might be other processes being shared on the server, it might be something else. Either way, I'm going to have to spend time evaluating this CPU, especially those peeks about a week ago. Looking at the Pages/sec, again, just a measure of load, I see that there are some peaks on the rg-sql02 server, but over all, it looks like a fairly standard load. Plus, the peaks are only up to 550 pages/sec. Remember, this isn't a performance measure, but just a load measurement, but from this, I don't think we're looking at major memory issues, but I may want to correlate these counters with the CPU counters. Again, the other server looks like there's stuff going on. The load is not at all consistent. In fact there was a point earlier in the year that looks pretty severe. Plus the spikes here are twice the size of the other system. We've got a lot more load going on here and I will probably need to drill down on memory usage on this server. Taking a look at the disk transfers/sec the load on both systems seems to roughly correspond to the other load indicators. Notice that drop right in the middle of the graph for rg-sql02. I wonder if the office was closed over that period or a system was down for maintenance. If I saw spikes in memory or disk that corresponded to the drip in CPU, you can assume something was using those other resources and causing a drop, but when everything goes down, it just means that the system isn't gettting used. The disk on the rg-sql01 system isn't spiking exactly the same way as the memory & cpu, so there's a good chance (chance mind you) that any performance issues might not be disk related. However, notice that huge jump at the beginning of the month. Several disks were used more than they were for the rest of the month. That's the load on the server. What about the load on SQL Server itself? Next time.

  Read the article

• SOA 11g Technology Adapters – ECID Propagation

  - by Greg Mally

  Overview Many SOA Suite 11g deployments include the use of the technology adapters for various activities including integration with FTP, database, and files to name a few. Although the integrations with these adapters are easy and feature rich, there can be some challenges from the operations perspective. One of these challenges is how to correlate a logical business transaction across SOA component instances. This correlation is typically accomplished via the execution context ID (ECID), but we lose the ECID correlation when the business transaction spans technologies like FTP, database, and files. A new feature has been introduced in the Oracle adapter JCA framework to allow the propagation of the ECID. This feature is available in the forthcoming SOA Suite 11.1.1.7 (PS6). The basic concept of propagating the ECID is to identify somewhere in the payload of the message where the ECID can be stored. Then two Binding Properties, relating to the location of the ECID in the message, are added to either the Exposed Service (left-hand side of composite) or External Reference (right-hand side of composite). This will give the JCA framework enough information to either extract the ECID from or add the ECID to the message. In the scenario of extracting the ECID from the message, the ECID will be used for the new component instance. Where to Put the ECID When trying to determine where to store the ECID in the message, you basically have two options: Add a new optional element to your message schema. Leverage an existing element that is not used in your schema. The best scenario is that you are able to add the optional element to your message since trying to find an unused element will prove difficult in most situations. The schema will be holding the ECID value which looks something like the following: 11d1def534ea1be0:7ae4cac3:13b4455735c:-8000-00000000000002dc Configuring Composite Services/References Now that you have identified where you want the ECID to be stored in the message, the JCA framework needs to have this information as well. The two pieces of information that the framework needs relates to the message schema: The namespace for the element in the message. The XPath to the element in the message. To better understand this, let's look at an example for the following database table: When an Exposed Service is created via the Database Adapter Wizard in the composite, the following schema is created: For this example, the two Binding Properties we add to the ReadRow service in the composite are: <!-- Properties for the binding to propagate the ECID from the database table --> <property name="jca.ecid.nslist" type="xs:string" many="false">  xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/top/ReadRow"</property> <property name="jca.ecid.xpath" type="xs:string" many="false">  /ns1:EcidPropagationCollection/ns1:EcidPropagation/ns1:ecid</property> Notice that the property called jca.ecid.nslist contains the targetNamespace defined in the schema and the property called jca.ecid.xpath contains the XPath statement to the element. The XPath statement also contains the appropriate namespace prefix (ns1) which is defined in the jca.ecid.nslist property. When the Database Adapter service reads a row from the database, it will retrieve the ECID value from the payload and remove the element from the payload. When the component instance is created, it will be associated with the retrieved ECID and the payload contains everything except the ECID element/value. The only time the ECID is visible is when it is stored safely in the resource technology like the database, a file, or a queue. Simple Database/File/JMS Example This section contains a simplified example of how the ECID can propagate through a database table, a file, and JMS queue. The composite for the example looks like the following: The flow of this example is as follows: Invoke database insert using the insertwithecidbpelprocess_client_ep Service. The InsertWithECIDBPELProcess adds a row to the database via the Database Adapter. The JCA Framework adds the ECID to the message prior to inserting. The ReadRow Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadRowBPELProcess is created and it is associated with the retried ECID. The ReadRowBPELProcess now writes the record to the file system via the File Adapter. The JCA Framework adds the ECID to the message prior to writing the message to file. The ReadFile Service retrieves the record from the file system and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadFileBPELProcess is created and it is associated with the retried ECID. The ReadFileBPELProcess now enqueues the message via the JMS Adapter. The JCA Framework adds the ECID to the message prior to enqueuing the message. The DequeueMessage Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of DequeueMessageBPELProcess is created and it is associated with the retried ECID. The logical flow ends. When viewing the Flow Trace in the Enterprise Manger, you will now see all the instances correlated via ECID: Please check back here when SOA Suite 11.1.1.7 is released for this example. With the example you can run it yourself and reinforce what has been shared in this blog via a hands-on experience. One final note: the contents of this blog may be included in the official SOA Suite 11.1.1.7 documentation, but you will still need to come here to get the example.

  Read the article

• SVN naming convention: repository, branches, tags

  - by LookitsPuck

  Hey all! Just curious what your naming conventions are for the following: Repository name Branches Tags Right now, we're employing the following standards with SVN, but would like to improve on it: Each project has its own repository Each repository has a set of directories: tags, branches, trunk Tags are immutable copies of the the tree (release, beta, rc, etc.) Branches are typically feature branches Trunk is ongoing development (quick additions, bug fixes, etc.) Now, with that said, I'm curious how everyone is not only handling the naming of their repositories, but also their tags and branches. For example, do you employ a camel case structure for the project name? So, if your project is something like Backyard Baseball for Youngins, how do you handle that? backyardBaseballForYoungins backyard_baseball_for_youngins BackyardBaseballForYoungins backyardbaseballforyoungins That seems rather trivial, but it's a question. If you're going with the feature branch paradigm, how do you name your feature branches? After the feature itself in plain English? Some sort of versioning scheme? I.e. say you want to add functionality to the Backyard Baseball app that allows users to add their own statistics. What would you call your branch? {repoName}/branches/user-add-statistics {repoName}/branches/userAddStatistics {repoName}/branches/user_add_statistics etc. Or: {repoName}/branches/1.1.0.1 If you go the version route, how do you correlate the version numbers? It seems that feature branches wouldn't benefit much from a versioning schema, being that 1 developer could be working on the "user add statistics" functionality, and another developer could be working on the "admin add statistics" functionality. How are these do branch versions named? Are they better off being: {repoName}/branches/1.1.0.1 - user add statistics {repoName}/branches/1.1.0.2 - admin add statistics And once they're merged into the trunk, the trunk might increment appropriately? Tags seem like they'd benefit the most from version numbers. With that being said, how are you correlating the versions for your project (whether it be trunk, branch, tag, etc.) with SVN? I.e. how do you, as the developer, know that 1.1.1 has admin add statistics, and user add statistics functionality? How are these descriptive and linked? It'd make sense for tags to have release notes in each tag since they're immutable. But, yeah, what are your SVN policies going forward?

  Read the article

• Checkbox has the wrong values

  - by Praesagus

  I have a page with several checkboxes on it, along with a dropdownlist of users. The checkboxes correlate to the user's permissions so each user is different. When a different user is chosen, the check boxes should change to match that user's permissions. The codebehind is correct, I stepped through it and the checkbox.checked value is being assigned to the box with the correct value to match the user. chk.Checked = viewable; No matter what I assign to the checked property the value stays the same as the very first submittal. I tried chk.EnableViewState = false; but that did not help. I am sure it is dot net trying to be helpful (grrr). Thank you for your help. There is no databinding per se. I will be saving the values from the textboxes via xmlhttp when the user clicks on them. I never want the check boxes to fill with values other than what I give them. Here is the essence of the code. foreach (DataRow dRow in dTable.Rows) { viewable = Convert.ToBoolean(dRow["Viewable"]); table.Rows.Add(CreatePageRow(Convert.ToString(dRow["SitePageViewName"]), Convert.ToString(dRow["SitePageName"]), folderDepth, maxFolderDepth, viewable)); } FileTree.Controls.Add(table); private TableRow CreatePageRow(String ViewName, String FileName, Int32 folderDepth, Int32 maxFolderDepth, Boolean viewable) { TableRow tr = new TableRow(); tr.Cells.Add(CreateCheckboxCell(viewable, folderDepth+3)); tr.Cells.Add(CreateImageCell("/images/icon/sm/report_graph.gif", "Page: " + ViewName)); tr.Cells.Add(CreateTitleCell(ViewName, maxFolderDepth - (folderDepth+1), FileName)); return tr; } private TableCell CreateCheckboxCell(Boolean viewable, Int32 colSpan) { TableCell td = new TableCell(); if (colSpan > 1) td.ColumnSpan = colSpan; CheckBox chk = new CheckBox(); chk.Checked = viewable; chk.EnableViewState = false; td.Controls.Add(chk); td.CssClass = "right"; return td; }

  Read the article

• Memcached Lagging

  - by Brad Dwyer

  Let me preface this by saying that this is a followup question to this topic. That was "solved" by switching from Solaris (SmartOS) to Ubuntu for the memcached server. Now we've multiplied load by about 5x and are running into problems again. We are running a site that is doing about 1000 requests/minute, each request hits Memcached with approximately 3 reads and 1 write. So load is approximately 65 requests per second. Total data in the cache is about 37M, and each key contains a very small amount of data (a JSON-encoded array of integers amounting to less than 1K). We have setup a benchmarking script on these pages and fed the data into StatsD for logging. The problem is that there are spikes where Memcached takes a very long time to respond. These do not appear to correlate with spikes in traffic. What could be causing these spikes? Why would memcached take over a second to reply? We just booted up a second server to put in the pool and it didn't make any noticeable difference in the frequency or severity of the spikes. This is the output of getStats() on the servers: Array ( [-----------] => Array ( [pid] => 1364 [uptime] => 3715684 [threads] => 4 [time] => 1336596719 [pointer_size] => 64 [rusage_user_seconds] => 7924 [rusage_user_microseconds] => 170000 [rusage_system_seconds] => 187214 [rusage_system_microseconds] => 190000 [curr_items] => 12578 [total_items] => 53516300 [limit_maxbytes] => 943718400 [curr_connections] => 14 [total_connections] => 72550117 [connection_structures] => 165 [bytes] => 2616068 [cmd_get] => 450388258 [cmd_set] => 53493365 [get_hits] => 450388258 [get_misses] => 2244297 [evictions] => 0 [bytes_read] => 2138744916 [bytes_written] => 745275216 [version] => 1.4.2 ) [-----------:11211] => Array ( [pid] => 8099 [uptime] => 4687 [threads] => 4 [time] => 1336596719 [pointer_size] => 64 [rusage_user_seconds] => 7 [rusage_user_microseconds] => 170000 [rusage_system_seconds] => 290 [rusage_system_microseconds] => 990000 [curr_items] => 2384 [total_items] => 225964 [limit_maxbytes] => 943718400 [curr_connections] => 7 [total_connections] => 588097 [connection_structures] => 91 [bytes] => 562641 [cmd_get] => 1012562 [cmd_set] => 225778 [get_hits] => 1012562 [get_misses] => 125161 [evictions] => 0 [bytes_read] => 91270698 [bytes_written] => 350071516 [version] => 1.4.2 ) ) Edit: Here is the result of a set and retrieve of 10,000 values. Normal: Stored 10000 values in 5.6118 seconds. Average: 0.0006 High: 0.1958 Low: 0.0003 Fetched 10000 values in 5.1215 seconds. Average: 0.0005 High: 0.0141 Low: 0.0003 When Spiking: Stored 10000 values in 16.5074 seconds. Average: 0.0017 High: 0.9288 Low: 0.0003 Fetched 10000 values in 19.8771 seconds. Average: 0.0020 High: 0.9478 Low: 0.0003

  Read the article

• Incorrect gzipping of http requests, can't find who's doing it

  - by Ned Batchelder

  We're seeing some very strange mangling of HTTP responses, and we can't figure out what is doing it. We have an app server handling JSON requests. Occasionally, the response is returned gzipped, but with incorrect headers that prevent the browser from interpreting it correctly. The problem is intermittent, and changes behavior over time. Yesterday morning it seemed to fail 50% of the time, and in fact, seemed tied to one of our two load-balanced servers. Later in the afternoon, it was failing only 20 times out of 1000, and didn't correlate with an app server. The two app servers are running Apache 2.2 with mod_wsgi and a Django app stack. They have identical Apache configs and source trees, and even identical packages installed on Red Hat. There's a hardware load balancer in front, I don't know the make or model. Akamai is also part of the food chain, though we removed Akamai and still had the problem. Here's a good request and response: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Length: 47 < Content-Type: application/x-javascript < Connection: keep-alive < Vary: Accept-Encoding < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 {"msg": "", "status": "OK", "printer_name": ""} And here's a bad one: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Type: application/x-javascript < Content-Encoding: gzip < Content-Length: 59 < Connection: keep-alive < Vary: Accept-Encoding < X-N: S < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 ?V?-NW?RPR?QP*.I,)-???A??????????T??Z? ??/ There are two things to notice about the bad response: It has two Content-Encoding headers, and the browsers seem to use the first. So they see an identity encoding header, and gzipped content, so they can't interpret the response. The bad response has an extra "X-N: S" header. Perhaps if I could find out what intermediary adds "X-N: S" headers to responses, I could track down the culprit...

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >