Search Results

Search found 105 results on 5 pages for 'ddr'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Why won't 2GB of ram across 3 of 4 slots work on my motherboard (max 2GB)?

    - by Andrew
    My desktop is an old home-built machine circa 200[5-6] running Ubuntu 11.10 (but this is not relevant because I'm reading available ram from BIOS loading screen), with an ASUS P5GPL motherboard, not X or X-SE - it has four slots. I'm mainly a laptop person, but keep this around for running a server from if needed, backing up to, seeding Ubuntu to people from, etc… It has four (DDR) ram slots, two black and two blue, in the order black-blue-black-blue (I will call them D, C, B, and A, respectively) with some space in the middle. The blue ones are the closest to the processor. I used to have two 512MB chips in the two blue slots. I just got a 1GB chip and plugged it into one of the black slots; my system didn't recognize it. I messed around and discovered that it will not recognize chips in many positions, and I couldn't get it to recognize all three of these chips at the same time. In particular, if I put the 512MB chips in A and B it would only use 1, but AC, AD, BD, and CD worked. I didn't try BC, I believe. Only some of these continue to work when I switch the 1GB chip into one of these positions. Can I have some advice as to how to position these chips to get all 2GB used? How about if I get another 1GB chip - where should I put the two? And what about the RAM maximum Crucial says? Can I go above 2GB, if I get another 1GB chip? Right now, I have a 512MB chip in A and the 1GB chip in C. EDIT: I read some other posts and tried dmidecode in Ubuntu to clarify the max memory question, that wasn't a major part anyways. It says my max memory module size is 1024M (OK) and my max memory size is 4096M (doesn't agree with Crucial OR the Asus web site, maybe it will only work while in Linux and BIOS won't OK it?).

    Read the article

  • Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

    - by Om Nom Nom
    I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

    Read the article

  • Starting my own server - basic recommendations and questions [closed]

    - by Ilia Rostovtsev
    Possible Duplicate: Can you help me with my capacity planning? I'm planning to start my own high-performance server and then use collocation services for keeping it up and running. I'm planning to USE it for processing videos and keeping big video site up! (using FFMpeg, MENcoder and etc.) I just need recommendations on whether listed hardware is good enough and will work together well and fast enough. Do I need anything else (missed something). I remember about CPU coolers though! ;) I'm planning to use SSD drives so please tell me if it's going to work just as regular HDDs (but much faster)? Are they going to be used as RAID (is this possible for SSDs)? Here is what I would like to get: Intel ® Server System SR1600URHSR (Urbanna) or Intel® Server System SR1695WBAC 2 x Intel Xeon X5650 4 x 16Gb DDR-III 1333MHz Kingston ECC Reg (KVR13R9D4/16) 3 x (or maybe 4x) 480Gb SSD Intel 520 Series (SSDSC2CW480A3K5) Which server system would be better? Is listed hardware new/good enough and worth buying it at the moment? Should I probably take a look at something slightly more expensive but more up to date and powerful, may be? After all as software I would like to use CentOS 6 64 bit + WHM/CPanel? Any other suggestions on maybe cheaper and same/more powerful server management system but WHM? What most important points to keep in mind when starting/maintaining your own server?

    Read the article

  • Minimum specs needed to run 1080p HD movies?

    - by Wesley
    Hi all, I was wondering how low you could go with hardware that would still be able to smoothly run HD movies. My current plan is around $215 CAD w/o a hard drive: Intel Pentium 4 @ 3.2 GHz - 1GB DDR/SDRAM - 512MB X1600 Pro AGP - 350W PSU - ECS P4VXASD2+ - Bluray/DVD-RW drive. As for the hard drive, could I just get a 7200RPM IDE HDD? Also, I'm planning on installing XP Pro SP3, unless Ubuntu somehow has an advantage. I'm not wanting this to be a media center only computer... just want it to be a normal computer with just enough oomph to play HD movies. Thanks in advance. EDIT1: Forgot to mention that the Bluray/DVD-RW drive is SATA, but I was planning on getting an SATA-IDE adapter or a PCI card with SATA. EDIT2: Oh yes... if I get a PCI card with SATA, would you then recommend I use an SATA hard drive as well? That would leave all the IDE ports on the motherboard unused... is that a good idea?

    Read the article

  • Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

    - by Wesley
    Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

    Read the article

  • Cannot set video resolution above 640x480 after installing Windows XP SP2

    - by waanders
    I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

    Read the article

  • When machine is turned on, only the fan runs

    - by Gopal
    Hi, I have an issue slightly similar to this one posted here, http://superuser.com/questions/127016/troubleshooting-monitor-never-turns-on-system-fans-running-dvd-rom-does-not-op My configuration is as follows: EPOX 9NPA+ Ultra motherboard AMD Athlon 64 CPU Corsair 2 x 1GB PC3200 DDR RAM 1 DVD RW drive and 1 CD ROM Drive SATA 250 GB Hard drive 400W Power supply EVGA 256MB graphics card I have had this configuration for about four years. Last month, I started having issues in starting the machine. It wouldn't start when I press the ON button in the front of the case. So I used to pull out the power cord and plug it back in and then switch on in the front, and it used to work fine. And then one fine day, when I plugged in the power cord at the back, even without switching on the power-on button at the front, I saw that the fan at the back was running. So I opened the system. Then I could see that all the fans inside were running. I replaced the power supply. No luck there. Then I replaced the CMOS battery. Again nothing improved. Even when I removed all the cards and memory, I still get one short beep. That's it. Any idea how to proceed on this? Anything else could be checked? I want to confirm if this is a motherboard failure, before proceeding to replace it.

    Read the article

  • AGP 4x slot running at 2x

    - by Wesley
    Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

    Read the article

  • which grabber is good enough to get 1000fps?

    - by user261002
    I have two framegrabber with a fast camera (1800+ fps). can anybody who understand the hardware, explain to me which of the following grabbers can help me more to grab 1000fps ? here are the the features of the two grabbers : Inspecta-5 Full Camera Link® Version: · Support for line scan and area cameras. · Video data rate of up to 660 Mbytes/sec. · PCI – X bus interface for 64 Bit data width and 66 MHz clock frequency. · PCI bus interface for 32 Bit data width and 33 MHz clock frequency. · 2 Gigabyte Onboard Memory for fast video streams. · Four opt coupled input- output ports for external trigger and encoder signals. · 528 Mbytes/sec. maximum data rate on the PCI–X Bus. · SDK for Windows 2000/XP SILICONSOFTWARE V-Series Camera Link : “microEnable IV VD4-CL” · Camera Pixel Clock Support 85 MHz · Area Scan Cameras 32k * 64k max. image size · Line Scan Cameras 64k max. image width · Acquisition Buffer: 512 MB DDR-RAM · Sustainable Transfer Rate (max.) 850 MBytes/sec. · microEnable SDK for Windows XP/Vista/ 7/ Linux

    Read the article

  • Proper approach to debug PC startup problems (POST)

    - by saurabhj
    My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

    Read the article

  • Computer slow after installing 32GB RAM

    - by John Gilmore
    I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

    Read the article

  • Windows Displays Double the Actual Installed Physical Memory

    - by Andrew Barber
    I have a server I've installed Windows Web 2008 R2 on, which is reporting that I have double the physical memory installed as is actually the case. In msinfo32 "Installed Physical Memory" shows as 2x what ever the actual installed amount is, though "Total Physical Memory" shows the correct amount. The "System" info window shows installed memory as 2x, with the correct amount in parenthesis listed as the "usable" amount). This server mistakenly had Windows Web 2008 (32-bit) installed on it just previously, and that OS also reported the same faulty information as Win2K8R2 is reporting. BIOS reports the correct amount, memtest was run on this server before installation, and a previous Windows 2000 instance installed on this system also reported the correct amount, as I recall. Server operation seems to be fine as well (it's only trying to use the correct amount of memory). The server is a generic pizzabox running on a SuperMicro X6DVL-EG with dual Xeon-3.2's. Memory installed are 4 matching mt18vddf12872g-335c3 sticks (1GB pc2700 DDR ECC REG cl2.5) This behavior occurs whether two or all four are installed. So, has anyone seen something like this before? Have any idea about what's causing it, and how I should be concerned about it? Everything else seems good so far, and I'll be upgrading the memory before putting the server into service, but I don't want to spend too much time/money/effort on the server if it's got something odd going wrong here. UPDATE: There was a question I ran into regarding memory sparing in the BIOS and a possible (buggy) effect thereof; however, flipping that bit back and forth in the BIOS revealed that isn't the issue. Still flummoxed a bit about this one, though I still have seen no negative impacts. Post-Answer Update (January 13, 2011): Upgrading the system with new, larger memory has fixed this issue.

    Read the article

  • Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

    - by Dominick1978
    I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

    Read the article

  • Converting linear colors to SRGB shows banding in FFmpeg

    - by user1863947
    When I convert an EXR file sequence with x264 using FFmpeg and convert the colorspace from linear to SRGB (with gamma 0.45454545) I get some heavy banding issues (most visible on a dark gradient). Here is the ffmpeg command I use: C:/ffmpeg.exe -y -i C:/seq_v001.%04d.exr -vf lutrgb=r=gammaval(0.45454545):g=gammaval(0.45454545):b=gammaval(0.45454545) -vcodec libx264 -pix_fmt yuv420p -preset slow -crf 18 -r 25 C:/out.mov Here is the output: ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers built on Nov 25 2012 12:25:21 with gcc 4.7.2 (GCC) configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 9.100 / 52. 9.100 libavcodec 54. 77.100 / 54. 77.100 libavformat 54. 37.100 / 54. 37.100 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 23.102 / 3. 23.102 libswscale 2. 1.102 / 2. 1.102 libswresample 0. 17.101 / 0. 17.101 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'C:/seq_v001.%04d.exr': Duration: 00:00:09.60, start: 0.000000, bitrate: N/A Stream #0:0: Video: exr, rgb48le, 960x540 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0000000004d11540] using SAR=1/1 [libx264 @ 0000000004d11540] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0000000004d11540] profile High, level 3.1 [libx264 @ 0000000004d11540] 264 - core 128 r2216 198a7ea - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=5 deblock=1:0:0 analyse=0x3:0x113 me=umh subme=8 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=50 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mov, to 'C:/out.mov': Metadata: encoder : Lavf54.37.100 Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p, 960x540 [SAR 1:1 DAR 16:9], q=-1--1, 12800 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (exr -> libx264) Press [q] to stop, [?] for help [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 16 fps=0.0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute frame= 34 fps= 33 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute frame= 52 fps= 34 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 68 fps= 34 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute frame= 85 fps= 33 q=23.0 size= 47kB time=00:00:00.44 bitrate= 867.5kbits/s Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute frame= 104 fps= 34 q=23.0 size= 94kB time=00:00:01.20 bitrate= 640.3kbits/s Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute frame= 121 fps= 34 q=23.0 size= 133kB time=00:00:01.88 bitrate= 577.8kbits/s Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute frame= 139 fps= 34 q=23.0 size= 172kB time=00:00:02.60 bitrate= 543.4kbits/s Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute frame= 157 fps= 34 q=23.0 size= 213kB time=00:00:03.32 bitrate= 525.6kbits/s Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute frame= 175 fps= 34 q=23.0 size= 254kB time=00:00:04.04 bitrate= 516.0kbits/s Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute frame= 193 fps= 35 q=23.0 size= 287kB time=00:00:04.76 bitrate= 494.6kbits/s Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute frame= 211 fps= 35 q=23.0 size= 332kB time=00:00:05.48 bitrate= 496.4kbits/s Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute [exr @ 000000000dffa660] Found more than one compression attribute [exr @ 000000000dffaaa0] Found more than one compression attribute [exr @ 000000000dffaf00] Found more than one compression attribute [exr @ 000000000dffb340] Found more than one compression attribute [exr @ 000000000dffb7a0] Found more than one compression attribute [exr @ 000000000dffbbe0] Found more than one compression attribute [exr @ 000000000dffc040] Found more than one compression attribute [exr @ 000000000dff8c40] Found more than one compression attribute [exr @ 000000000dff90c0] Found more than one compression attribute [exr @ 000000000dff9520] Found more than one compression attribute [exr @ 000000000dff9960] Found more than one compression attribute [exr @ 000000000dff9dc0] Found more than one compression attribute [exr @ 000000000dffa200] Found more than one compression attribute frame= 228 fps= 34 q=23.0 size= 421kB time=00:00:06.16 bitrate= 559.8kbits/s frame= 240 fps= 32 q=-1.0 Lsize= 708kB time=00:00:09.52 bitrate= 609.3kbits/s video:705kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.505636% [libx264 @ 0000000004d11540] frame I:2 Avg QP:15.07 size: 18186 [libx264 @ 0000000004d11540] frame P:73 Avg QP:16.51 size: 3719 [libx264 @ 0000000004d11540] frame B:165 Avg QP:18.38 size: 2502 [libx264 @ 0000000004d11540] consecutive B-frames: 2.5% 3.3% 42.5% 51.7% [libx264 @ 0000000004d11540] mb I I16..4: 46.2% 33.3% 20.4% [libx264 @ 0000000004d11540] mb P I16..4: 6.8% 2.0% 0.6% P16..4: 29.4% 10.5% 4.6% 0.0% 0.0% skip:46.1% [libx264 @ 0000000004d11540] mb B I16..4: 1.8% 0.7% 0.2% B16..8: 40.9% 6.5% 0.3% direct: 1.2% skip:48.5% L0:52.0% L1:47.5% BI: 0.5% [libx264 @ 0000000004d11540] 8x8 transform intra:24.7% inter:81.3% [libx264 @ 0000000004d11540] direct mvs spatial:93.3% temporal:6.7% [libx264 @ 0000000004d11540] coded y,uvDC,uvAC intra: 10.7% 31.4% 24.9% inter: 2.3% 9.0% 2.9% [libx264 @ 0000000004d11540] i16 v,h,dc,p: 83% 11% 6% 1% [libx264 @ 0000000004d11540] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 9% 9% 52% 6% 4% 4% 5% 5% 5% [libx264 @ 0000000004d11540] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 11% 44% 5% 4% 3% 3% 4% 3% [libx264 @ 0000000004d11540] i8c dc,h,v,p: 69% 15% 15% 2% [libx264 @ 0000000004d11540] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0000000004d11540] ref P L0: 48.9% 0.1% 16.8% 17.0% 11.3% 5.8% [libx264 @ 0000000004d11540] ref B L0: 57.7% 21.9% 13.9% 6.4% [libx264 @ 0000000004d11540] ref B L1: 82.4% 17.6% [libx264 @ 0000000004d11540] kb/s:600.61 For me it looks like it converts the video first and afterwards applies the gamma correction on 8-bit clipped video. Does someone have an idea?

    Read the article

  • Terrible DotNetNuke performance

    - by Peter Bridger
    I'm involved with a project using DotNetNuke version 05.01.04 Community Edition. We are building our new Intranet using it, but performance is terrible. We have five people adding pages and content to it and every 15-30 seconds they experience a pause of 10 seconds or longer before the system continues and the next screens loads. The server is Windows 2003, 3.8GHz with 1GB of RAM. I'm told by our server admin that the CPU and memory performance don't appear to be the bottleneck. We currently have 350 pages in the system, we a plan to add 1000. So we need to resolve this performance problem so that we can enter content and so we can go live. I just can't see where the bottleneck is. Is there a good why to determine the bottleneck when using DotNetNuke? Modules installed Publish:Engage (Not currently in use) Page Blaster (Doesn't appear to providing caching when users logged in using Integrated Authentication) SimpleGallery XMod Content Manager IIS Setup Application recycling completely disabled (Apart from a 2am recycle) New findings: 18th March 2010 The main bottleneck was due to version 5.1.4 having a bug which caused 1300 database roundtrips on an average page, due to broken database in-memory caching. We've upgraded to 5.2.4 which has resolved this bottleneck. Now the next biggest bottleneck is the navigation. We've used both DDR:Menu and DDN:Nav, but both have a major impact on performance. Is there a navigation interface out there that doesn't drain performance so badly?

    Read the article

  • Encoding h.264 with libavcodec/x264

    - by Leviathan
    I am attempting to encode video using libavcodec/libavformat. I'm trying to change the standard output-example.c from ffmpeg source. The AVI file is created on the disk, but the only sound is encoded. I tried adding a lot of options for x264 from here. All the other codecs works fine, mpeg2, mpeg4, mjpeg, xvid. In addition to specifying the parameters x264, I also set the codec to AVOutputFormat structure. That's all I've done. AVOutputFormat *pOutFormat; // in header file av_register_all(); AVCodec *codec = avcodec_find_encoder_by_name("libx264"); pOutFormat = guess_format("avi", NULL, NULL); pOutFormat->video_codec = codec->id; The debug output of my application: Output #0, mp4, to 'D:\1.avi': Stream #0.0: Video: libx264, yuv420p, 320x240, q=10-51, 500 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: aac, 44100 Hz, 1 channels, s16, 128 kb/s [libx264 @ 0x694010]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x694010]bitrate tolerance too small, using .01 [libx264 @ 0x694010]profile Main, level 2.0 [libx264 @ 0x694010]frame I:150 Avg QP:14.76 size: 2534 [libx264 @ 0x694010]mb I I16..4: 75.9% 0.0% 24.1% [libx264 @ 0x694010]final ratefactor: 17.57 [libx264 @ 0x694010]coded y,uvDC,uvAC intra: 42.7% 92.4% 47.4% [libx264 @ 0x694010]i16 v,h,dc,p: 11% 14% 2% 73% [libx264 @ 0x694010]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21% 18% 29% 5% 8% 10% 3% 3% 2% [libx264 @ 0x694010]kb/s:506.79

    Read the article

  • Windows XP SP3 - Library not registered error... IE8 not installing.

    - by Wesley
    Specs to put things in context: AMD Athlon XP 2400+ @ 1987 MHz / 2 x 512MB PC3200 DDR RAM / WD 160GB IDE HDD / 3DFuzion 128MB GeForce 6200 AGP 4x / FIC AM37 / Windows XP SP3 Just recently, I was unable to start Windows Media Player. I clicked it and the busy cursor came up, but then nothing happened. Also, I tried doing a search for a file, and same thing. It would show busy cursor then suddenly stop doing anything. I couldn't find it in the Processes of the Task Manager. (Perhaps I don't know what I'm looking for?) Also, I was trying to update my DirectX, which has been running something older than DX9 9.0c for a while now, except the installation fails due to "internal error". I think the failed DirectX installation has been like that for a while... (I remember trying to install DX9 9.0c a while back, but still failed.) The Windows programs not starting, I don't think I've ever had before... what could be the cause of these problems?! Thanks in advance. =) EDIT1: Weird thing now is that when I try to open User Accounts, I get a message saying "Wrong number of arguments or invalid property assignment." Also, when I'm trying to open services.msc, I'm getting a script error that says that "Library not registered." (Code: 0, URL: res://C:\WINDOWS\System32\mmcndmgr.dll/views.htm) Perhaps this is related to my other question, where I seemed to have an unregistered library of some sort. EDIT2: The DirectX End-User Runtime Web Installer freakishly worked and updated successfully. Now, I have focussed the question on the bigger problem. For WMP11, H&S, and Search, I click it once, get a busy icon for a second, and then nothing happens. Refer to EDIT1 for other problems. EDIT3: Seems that my problems may be related to some Internet Explorer Script Errors. So what I did was download the IE8 installer from the Microsoft website, but when I run it and get to the main portion of the installer, it just keeps looping on the Downloading step of the installation. The installer is still running, but I left it for at least 4 hours and the downloading step was still not finished. What is the problem? Also, I uninstalled Ubuntu 9.10 after these problems, but they still remain. EDIT4: I'm getting an active desktop recovery background on startup now. And within seconds my computer hangs again. EDIT3 explains main issue though.

    Read the article

  • Some apps very slow to load on Windows 7, copy & paste very slow.

    - by Mike
    Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

    Read the article

  • Subversion/Hudson/Sonar/Artifactory - too much for my little server to handle! Help!

    - by Ricket
    I have a little dedicated server. It's at a cheap price and has a simple AMD 1800+ (1.5ghz), 256mb DDR RAM, ...need I continue? And I think I'm overloading it already. I have installed the following, and it's running CentOS 5.4: Webmin Apache MySQL Subversion as an Apache module Hudson (standalone) Sonar (standalone, runs with a standalone Jetty install) Artifactory (standalone) That's pretty much it. But I'm having problems; pages are loading quite slowly. Network speed of the server is excellent, but I think I'm just running out of CPU and/or memory. A side-effect of the pages loading slowly is that sometimes Hudson times out, not being able to start Maven or contact Sonar in a certain amount of time. I think the next step to speed things up might be to move to an application server and use the WAR version of Hudson, Sonar and Artifactory together on that server. I don't know that it will help, but it just seems to make sense, especially with Sonar running on its own Jetty install and the other two probably running their own mini application servers as well. Am I correct in thinking this? Is this the right course of action? Any other tips on how to make the server run faster? I can post more data if you'd like, just let me know what else would help you answer my question. Oh, also just to cure any suspicions, I don't have any sort of virus or spyware. I protect my SSH access with DenyHosts (which has blocked 300+ brute forcers in the past few months), and I have confirmed that the top four processes in terms of memory and CPU usage are Sonar, Artifactory, Hudson, and MySQL. Edit: I just thought of another thing that I'd like you to comment on as well: Apache currently has 8 spawned slave processes, taking 42MB of ram apiece. This is not my web server. Is everything else able to function if I shut down Apache? Can you point me towards a tutorial or something on migrating Subversion from Apache into something that might work along with the other three applications, maybe even make Subversion a WAR file or something?

    Read the article

  • Why doesn't video run smoothly on my laptop anymore?

    - by andygrunt
    This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

    Read the article

  • Streaming desktop with avconv - severe sound issues

    - by Tommy Brunn
    I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

    Read the article

  • An error occured synchronizing windows with time.windows.com

    - by Killrawr
    Okay so I've tried stopping/registering the win32tm service on this Windows Server 2008 Enterprise Computer. C:\Users\Administrator>net stop w32time The Windows Time service is stopping. The Windows Time service was stopped successfully. C:\Users\Administrator>w32tm /unregister The following error occurred: Access is denied. (0x80070005) C:\Users\Administrator>w32tm /unregister W32Time successfully unregistered. C:\Users\Administrator>w32tm /register W32Time successfully registered. C:\Users\Administrator>net start w32time The Windows Time service is starting. The Windows Time service was started successfully. (Source : http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/9bdfc2cc-4775-4435-8868-57d214e1e3ba/) And I get this error from the Date and Time, Internet Time tab (After also following the steps here). I've even tried the Atomic Time Clock Worldtimeserver and I get the error The following error occurred: The specified module could not be found. (0x8007007E). I've also disabled the Windows Firewall, that might of been blocking the synchronization. I've done a file scan with sfc /scannow that came back with no errors. C:\Users\Administrator>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Users\Administrator> But I'm not having much luck. Is there anyway lo possibly solve this? or is the time.windows.com servers unsupported? because the software is from 2008? (I really don't know :/), My ping result to time.windows.com C:\Users\Administrator>ping time.windows.com Pinging time.microsoft.akadns.net [65.55.21.22] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 65.55.21.22: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), And tracert result C:\Users\Administratortracert time.windows.com Tracing route to time.microsoft.akadns.net [65.55.21.24] over a maximum of 30 hops: 1 1 ms <1 ms <1 ms 192.168.1.1 2 32 ms 31 ms 32 ms be2-100.bras1wtc.wlg.vf.net.nz [203.109.129.113] 3 31 ms 32 ms 31 ms be5-100.ppnzwtc01.wlg.vf.net.nz.129.109.203.in-a ddr.arpa [203.109.129.114] 4 31 ms 31 ms 31 ms gi0-2-0-3.ppnzwtc01.wlg.vf.net.nz.180.109.203.in -addr.arpa [203.109.180.210] 5 31 ms 31 ms 30 ms gi0-2-0-3.ppnzwtc02.wlg.vf.net.nz [203.109.180.2 09] 6 167 ms 166 ms 166 ms ip-141.199.31.114.VOCUS.net.au [114.31.199.141] 7 175 ms 175 ms 175 ms microsoft.com.any2ix.coresite.com [206.223.143.1 43] 8 177 ms 180 ms 176 ms xe-7-0-2-0.by2-96c-1a.ntwk.msn.net [207.46.42.17 6] 9 205 ms 205 ms 204 ms xe-10-0-2-0.co1-96c-1b.ntwk.msn.net [207.46.45.3 1] 10 * * * Request timed out. 11 * * * Request timed out. 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 ^C And nslookup C:\Users\Administrator>nslookup time.windows.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: time.microsoft.akadns.net Address: 65.55.21.22 Aliases: time.windows.com

    Read the article

  • Randomly displayed flashing lines, no response to all shortcuts, just power off. [syslog included]

    - by B. Roland
    Hello! I have an old machine, and I want to use for that to learn employees how to use Ubuntu, and to be easyer to switch from Windows. I've been installed 10.04, and updated, but this strange stuff is happend. Graphical installion failed, same strange thing. With alternate workd. Sometimes, when I boot up, a boot message displayed: Keyboard failure..., often diplayed after reboot, and after shutdown, when I haven't plugged off from AC. I replaced the keyboard yet, same failure... If I powered off, and plugged off from AC, no keyboard problems displayed in boot time. Details Configuration: Dell OptiPlex GX60 - in original cover, no changes. 256 MB DDR 166 MHz Intel® Celeron® Processor 2.40 GHz Dell 0C3207 Base Board I know, that is not enough, but I have three other Nec compuers, with nearly similar config, and they works well with 9.10, 10.04, 10.10. Live CDs I've been tried with 10.04 and 10.10, but the problem is displayed too. With 9.10 no strange things displayed, but it froze, during a simple apt-get install. Syslog An error loop is logged here, but I paste the whole startup and error lines. The flashing lines are displayed sometimes immediately after login, but sometimes after 10 minutes, but once occured, that nothing happend. Strange thing is displayed immediately after login: here. An other boot, after some minutes, strange lines, and loop in log appeard: here. The loop should be that: Jan 23 00:20:08 machine_name kernel: [ 46.782212] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 23 00:20:08 machine_name kernel: [ 47.100033] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 23 00:20:08 machine_name kernel: [ 47.100045] render error detected, EIR: 0x00000000 Jan 23 00:20:08 machine_name kernel: [ 47.101487] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 16 at 9) Jan 23 00:20:11 machine_name kernel: [ 49.152020] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 23 00:20:11 machine_name gdm-simple-slave[1245]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Jan 23 00:20:11 machine_name acpid: client 1239[0:0] has disconnected Jan 23 00:20:11 machine_name acpid: client connected from 1247[0:0] Jan 23 00:20:11 machine_name acpid: 1 client rule loaded UPDATE Added syslog things: before errors, error loop, the complete shutdown(after the big updates): Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully called chroot. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully dropped privileges. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully limited resources. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Watchdog thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Canary thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully made thread 1337 of process 1337 (n/a) owned by '1001' high priority at nice level -11. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Supervising 1 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1345 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 2 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1349 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 3 threads of 1 processes of 1 users. Jan 28 20:40:37 machine_name pulseaudio[1337]: ratelimit.c: 2 events suppressed Jan 28 20:41:33 machine_name AptDaemon: INFO: Initializing daemon Jan 28 20:41:44 machine_name kernel: [ 167.691563] lo: Disabled Privacy Extensions Jan 28 20:47:33 machine_name AptDaemon: INFO: Quiting due to inactivity Jan 28 20:47:33 machine_name AptDaemon: INFO: Shutdown was requested Jan 28 20:59:50 machine_name kernel: [ 1253.840513] lo: Disabled Privacy Extensions Jan 28 21:17:02 machine_name CRON[1874]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 21:17:38 machine_name kernel: [ 2321.553239] lo: Disabled Privacy Extensions Jan 28 22:07:44 machine_name kernel: [ 5327.840254] lo: Disabled Privacy Extensions Jan 28 22:17:02 machine_name CRON[2665]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 22:57:03 machine_name kernel: [ 8286.641472] lo: Disabled Privacy Extensions Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 23:07:42 machine_name kernel: [ 8925.272030] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:07:42 machine_name kernel: [ 8925.272048] render error detected, EIR: 0x00000000 Jan 28 23:07:42 machine_name kernel: [ 8925.272093] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171453 at 171452) Jan 28 23:07:45 machine_name kernel: [ 8928.868041] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:10 machine_name acpid: client 925[0:0] has disconnected Jan 28 23:08:10 machine_name acpid: client connected from 8127[0:0] Jan 28 23:08:10 machine_name acpid: 1 client rule loaded Jan 28 23:08:11 machine_name kernel: [ 8955.046248] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:12 machine_name kernel: [ 8955.364016] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:12 machine_name kernel: [ 8955.364027] render error detected, EIR: 0x00000000 Jan 28 23:08:12 machine_name kernel: [ 8955.364407] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171457 at 171452) Jan 28 23:08:14 machine_name kernel: [ 8957.472025] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:14 machine_name acpid: client 8127[0:0] has disconnected Jan 28 23:08:14 machine_name acpid: client connected from 8141[0:0] Jan 28 23:08:14 machine_name acpid: 1 client rule loaded Jan 28 23:08:15 machine_name kernel: [ 8958.671722] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:15 machine_name kernel: [ 8958.988015] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:15 machine_name kernel: [ 8958.988026] render error detected, EIR: 0x00000000 Jan 28 23:08:15 machine_name kernel: [ 8958.989400] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171459 at 171452) Jan 28 23:08:16 machine_name init: tty4 main process (848) killed by TERM signal Jan 28 23:08:16 machine_name init: tty5 main process (856) killed by TERM signal Jan 28 23:08:16 machine_name NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Jan 28 23:08:16 machine_name init: tty2 main process (874) killed by TERM signal Jan 28 23:08:16 machine_name init: tty3 main process (875) killed by TERM signal Jan 28 23:08:16 machine_name init: tty6 main process (877) killed by TERM signal Jan 28 23:08:16 machine_name init: cron main process (890) killed by TERM signal Jan 28 23:08:16 machine_name init: tty1 main process (1146) killed by TERM signal Jan 28 23:08:16 machine_name avahi-daemon[644]: Got SIGTERM, quitting. Jan 28 23:08:16 machine_name avahi-daemon[644]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.238.11.134. Jan 28 23:08:16 machine_name acpid: exiting Jan 28 23:08:16 machine_name init: avahi-daemon main process (644) terminated with status 255 Jan 28 23:08:17 machine_name kernel: Kernel logging (proc) stopped. Jan 28 23:09:00 machine_name kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 28 23:09:00 machine_name rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="516" x-info="http://www.rsyslog.com"] (re)start Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's groupid changed to 103 Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's userid changed to 101 Jan 28 23:09:00 machine_name rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] When I hit the On/Off button, the system shuts down normally. May be it a hardware problem, but I don't know... Can you say something useful to solve my problem?

    Read the article

  • CodePlex Daily Summary for Friday, September 14, 2012

    CodePlex Daily Summary for Friday, September 14, 2012Popular ReleasesSOAP Test Application (with EWS Tools): v0.60: Template modifications (to delete blank fields where they are not required). Bugfix for listener form where it wouldn't allow the program to be closed under certain conditions.BizTalk Zombie Management: BizTalkZombieManagement V0.1.0: First version Function supported : Listener on zombie event Dump the zombie message in folderTumblen3: tumblen3 Version14Sep2012: added 'proxy-getter' of tumblr's OAuth Access TokenIBR.StringResourceBuilder: V1.3 Release 2 Build 13: Fixed: "Making" a string resource left the table of string literals blank (due to "improvement" in Build 11). Improved: Sped up inserting resource call when "making" a string resource. from Build 12 New: Option to store all string resources in one resource file global to the project.Fruit Juice: Fruit Juice v1.0: First versionPDF Viewer Web part: PDF Viewer Web Part: PDF Viewer Web PartMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.67: Fix issue #18629 - incorrectly handling null characters in string literals and not throwing an error when outside string literals. update for Issue #18600 - forgot to make the ///#DEBUG= directive also set a known-global for the given debug namespace. removed the kill-switch for disregarding preprocessor define-comments (///#IF and the like) and created a separate CodeSettings.IgnorePreprocessorDefines property for those who really need to turn that off. Some people had been setting -kil...Active Forums for DotNetNuke CMS: Active Forums 05.00.00 RC3: Active Forums 05.00.00 RC3Lakana - WPF Framework: Lakana V2: Lakana V2 contains : - Lakana WPF Forms (with sample project) - Lakana WPF Navigation (with sample project)Microsoft SQL Server Product Samples: Database: OData QueryFeed workflow activity: The OData QueryFeed sample activity shows how to create a workflow activity that consumes an OData resource, and renders entity properties in a Microsoft Excel 2010 worksheet or Microsoft Word 2010 document. Using the sample QueryFeed activity, you can consume any OData resource. The sample activity uses LINQ to project OData metadata into activity designer expression items. By setting activity expressions, a fully qualified OData query string is constructed consisting of Resource, Filter, Or...Arduino for Visual Studio: Arduino 1.x for Visual Studio 2012, 2010 and 2008: Register for the visualmicro.com forum for more news and updates Version 1209.10 includes support for VS2012 and minor fixes for the Arduino debugger beta test team. Version 1208.19 is considered stable for visual studio 2010 and 2008. If you are upgrading from an older release of Visual Micro and encounter a problem then uninstall "Visual Micro for Arduino" using "Control Panel>Add and Remove Programs" and then run the install again. Key Features of 1209.10 Support for Visual Studio 2...Social Network Importer for NodeXL: SocialNetImporter(v.1.5): This new version includes: - Fixed the "resource limit" bug caused by Facebook - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown????? - AcDown Downloader Framework: AcDown????? v4.1: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??...Move Mouse: Move Mouse 2.5.2: FIXED - Minor fixes and improvements.MVC Controls Toolkit: Mvc Controls Toolkit 2.3: Added The new release is compatible with Mvc4 RTM. Support for handling Time Zones in dates. Specifically added helper methods to convert to UTC or local time all DateTimes contained in a model received by a controller, and helper methods to handle date only fileds. This together with a detailed documentation on how TimeZones are handled in all situations by the Asp.net Mvc framework, will contribute to mitigate the nightmare of dates and timezones. Multiple Templates, and more options to...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.00: Maintenance Release Changes on Metro7 06.02.00 Fixed width and height on the jQuery popup for the Editor. Navigation Provider changed to DDR menu Added menu files and scripts Changed skins to Doctype HTML Changed manifest to dnn6 manifest file Changed License to HTML view Fixed issue on Metro7/PinkTitle.ascx with double registering of the Actions Changed source folder structure and start folder, so the project works with the default DNN structure on developing Added VS 20...Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter New feature - Set a property's DefaultValueHandling to Ignore when EmitDefaultValue from DataMemberAttribute is false Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing deci...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...New Projects$linq - A Javascript LINQ library: $linq is a Javascript version of .NET's Linq to Objects, with some query operations inspired by MoreLinq (an extension to Linq to Objects).AIlin: Some math operations with sparse and full matrices, elliptic curves and big numbersCapMvcHospital: Proyecto Hospital MVC para ABM de consultas clínicas y DoctoresChris on SharePoint Solutions: A collection of handy SharePoint solutions to make life easier for Site and Farm administrators.COTFACIL: O projeto visa estudar a integração web, mysql e visual studio 2010, para o estudo e conhecimento geral.Custom People Picker: The custom control which inherits the property of the "People Picker" control to display the items from the list.Data Sampler: The library allows the developer to quickly create dummy data or it can also be used to save a set of data that was originally retrieved from the database.DevelopEnvironment: ????????DotNetNuke Search Engine Sitemaps Provider: The iFinity DotNetNuke Search Engine Sitemaps Provider project generates Search Engine Sitemaps for DotNetNuke installs.Gapper Game: This is a recreation of the GAPPER DOS game that was released in 1986. The original has been abandon, so the Eastern Idaho .Net Users Group is remaking it.GestAdh45: Logiciel de gestion d'une association sportive : - gestion des adhérents/inscriptions - gestion des équipements (inventaire/vérifications)HP Printer Display Hack: A simple application that periodically checks the current price of a selected stock and sends it to the display of networked HP (and compatible) printers.INTELSI SAC: INICIOKnowledge Board Race: FATEC-SP - Engenharia de Software III KBR - Knowledge Board Race Desenvolvimento de um jogo educativo de tabuleiro on-line baseado em perguntas e respostas.MEDICALD PROJ: En este proyecto que lo haremos en equipo cada quien aportara su parte y luego la publicará aca.MVVM for Windows 8: Simple MVVM library for Windows 8.MyProjects: myprojectsNibbleOilWeb: Web Projectntcms: htcms system codingPowerConverter: PowerConverter allows you to change the old PE format to the new Power format for your PowerExtension programs.Primer Proyecto: dfrProject91404: pappapruebacodeplex: FooQuizz: D? án này là m?t ph?n c?a d? án t?t nghi?p. Vui lòng không s? d?ng vào m?c dích thuong m?i khi chua du?c s? d?ng ý c?a tác gi?.Runtime Dynamic Data Model Builder: Runtime Dynamic Data Model Builder lets you to have a Data Access Layer without writing code. It creates the database context and POCO based on Entity FrameworkSchoolProjectShitXD: Just a bunch of crap I am creating in my School,Scripture Reference Parser: Scripture Reference Parser is a library to parse data, including book, chapter, verse, and index, from references from various scriptures.Shadow: Shadow?????WCF??Remoting?ORM??,????????????????????。SharePoint Archive Tweets: Using REST, JSON and OAuth, SharePoint Archive Tweets (SPAT) was born. SPAT is a Microsoft SharePoint 2010 timer application that downloads Twitter timelines.Softech Portal - Vietnamese Portal: Gi?i pháp c?ng thông tin di?n t? thu?n Vi?t cho co quan hành chính Nhà Nu?c testdd09132012git01: sdtestdd09132012git02: ntestdd09132012hg01: dtestdd09132012tfs01: dteste tfs: testeTestRepository: Project Testing repository onlinetesttfs09132012tfs02: nThesis: This is my thesis project. It is about EDAs and Kernel classifiers. The source code is in Matlab.Tiny Contact Manager: Tiny Contact Manager manages collecting customer birthday and registration details and also sending out birthday vouchers.User Group Labs: My Groups: This is one of a series of social modules in the DotNetNuke User Group Labs project. This module allows you to easily lists the groups that a user is a part ofVatConnect: This is a Microsoft Flight Simulator add-on to connect it to the Vatsim network.Web Minesweeper with MVVM and Knockout: This is a common minesweeper game, that is implemented with mvvm in the web, only with html and javascipts libraries...Windows 8 - Using Roaming Storage in a Casual Game: This application demonstrates a simple game written for Windows 8 that illustrates how to utilize the Roaming Data Store for game data synchronization.xamlShow: This project is a demonstration of how to accomplish common tasks using WinRT XAML on Windows 8. This project is, basically, sample code used by Jerry Nixon.YTNet: YT Net is a small library which provides features for searching and downloading YouTube videos.

    Read the article

  • CodePlex Daily Summary for Wednesday, September 12, 2012

    CodePlex Daily Summary for Wednesday, September 12, 2012Popular ReleasesActive Forums for DotNetNuke CMS: Active Forums 05.00.00 RC2: Active Forums 05.00.00 RC2SSIS Compressed File Source and Destination Components: Compressed File Souce and Destination Components: Initial Beta ReleaseArduino for Visual Studio: Arduino 1.x for Visual Studio 2012, 2010 and 2008: Register for the visualmicro.com forum for more news and updates Version 1209.10 includes support for VS2012 and minor fixes for the Arduino debugger beta test team. Version 1208.19 is considered stable for visual studio 2010 and 2008. If you are upgrading from an older release of Visual Micro and encounter a problem then uninstall "Visual Micro for Arduino" using "Control Panel>Add and Remove Programs" and then run the install again. Key Features of 1209.10 Support for Visual Studio 2...Bookmark Collector: 01.01.00: This release has the follow new features and updates: Enhanced the ContentItem integration Changed the format of how ContentItem content is saved Implemented core JSON methods from the API Fully documented the source code Please Note: This module was originally written as a proof of concept for how to create a simple module using the Christoc module templates, and using the ContentItems API instead of a DAL. Minimum Requirements DotNetNuke v06.02.03 or newer .Net Framework v3.5 SP1...Microsoft Script Explorer for Windows PowerShell: Script Explorer Reference Implementation(s): This download contains Source Code and Documentation for Script Explorer DB Reference Implementation. You can create your own provider and use it in Script Explorer. Refer to the documentation for more information. The source code is provided "as is" without any warranty. Read the Readme.txt file in the SourceCode.Social Network Importer for NodeXL: SocialNetImporter(v.1.5): This new version includes: - Fixed the "resource limit" bug caused by Facebook - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown????? - AcDown Downloader Framework: AcDown????? v4.1: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??...Move Mouse: Move Mouse 2.5.2: FIXED - Minor fixes and improvements.MVC Controls Toolkit: Mvc Controls Toolkit 2.3: Added The new release is compatible with Mvc4 RTM. Support for handling Time Zones in dates. Specifically added helper methods to convert to UTC or local time all DateTimes contained in a model received by a controller, and helper methods to handle date only fileds. This together with a detailed documentation on how TimeZones are handled in all situations by the Asp.net Mvc framework, will contribute to mitigate the nightmare of dates and timezones. Multiple Templates, and more options to...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.00: Maintenance Release Changes on Metro7 06.02.00 Fixed width and height on the jQuery popup for the Editor. Navigation Provider changed to DDR menu Added menu files and scripts Changed skins to Doctype HTML Changed manifest to dnn6 manifest file Changed License to HTML view Fixed issue on Metro7/PinkTitle.ascx with double registering of the Actions Changed source folder structure and start folder, so the project works with the default DNN structure on developing Added VS 20...Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter New feature - Set a property's DefaultValueHandling to Ignore when EmitDefaultValue from DataMemberAttribute is false Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing deci...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Code Snippets for Windows Store Apps: Code Snippets for Windows Store Apps: First release of our snippets! For more information: Installation List of SnippetsUmbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...WordMat: WordMat v. 1.02: This version was used for the 2012 exam.menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.New Projects[ITFA GROUP] CODE GENER: Code Gener is a tool to help programmers and system builders in building applications. ANPR MX: ANPR MX is a simple Automatic Plate Recognition (ANPR) library for the North American average plate size based on C# and OpenCV. BatteryStatus: show battery level on status bar on an android deviceCode Snippets for Windows Store Apps: Code Snippets for Windows Store apps is a collection of around 60 IntelliSense Code Snippets for Visual Basic, C#, C++, and JavaScript developers.Cube2d: cube2dDiscover_U_Server: Discover_U_ServerExeLauncher: Make PATH recursiveExpression Evaluator + aggregate functions support: Simple library for expressions evaluation that supports variables in expression and aggregative functions to parse and evaluate expression against tabular data.FancyGrid: A custom datagrid for WPF with support for real-time filtering, multisort, and themes. Compatible with MVVM and normal WPF binding.langben: ??????????????,?????????????,??,???????,?????,???????,?????????????????????????。 ???? •????????(SOA) •????????????????? •?????????????? •??IE 6、IE 8+?FirefMakeTracks Gadgeteer GPS Module Driver: This project is the driver for the Gadgeteer compatible MakeTracks GPS module developed by Eric Hall and other members of the tinyclr.com community.MyCloud: heheOVS: OVS est un projet d'analyse et de traitement de signaux Vidéo sur IP avec remontées d'informations sur consultables sur des terminaux mobilesPMS: Project Management System for HSUScenario4: testSharePoint 2010 Syntax Highlighting: This project allows users to apply syntax highlighting to code snippits via the SharePoint 2010 Ribbon UI.SharePoint CRM: CRM/Project Management Site template for both SharePoint 2010 Enterprise and Office 365 Enterprise tennantsSharePoint PowerShell Wizard: The SharePoint PowerShell Wizards provides a tool to help generate and support some of the PowerShell scripts needed to recreate aspects of your farm.Shindo's Race System: Shindo's Race System is a plugin for SA:MP Dedicated Server 0.3e.Test MVC application: Test project - please ignore!weber: Weber is a private browser, it tries to prevent the user from being tracked by the advertisers and traffic monitoring sites. Hence it is severely impaired. Try!xuebin: web site

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >