Search Results

Search found 121 results on 5 pages for 'finalize'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Strange boot problems on 6 month old setup

    - by Balefire
    I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

    Read the article

  • Ubuntu 12.04 / 12.10 Randomly Freezing - nVidia?

    - by Alix Axel
    My Ubuntu install frequently freezes, sometimes showing a black screen (not very common anymore - in my latest installs), some other times the mouse and keyboard just fail to move and respond (not even Ctrl + Alt + F1 works) and some other times I'm able to move the mouse with a huge delay (2-5 seconds) but I'm not able to do/click anything. I have a pretty strong feeling that this problem is related to my graphic card drivers because: after hard reset, I usually get error reports about X.org / jockey it's common for artifacts to appear during loading / shutdown / whenever, for instance: pattern filled with £ during log off ugly-colored squared pattern during boot windows that are partially moved (i.e.: only the top half) Firefox renderings that leave the bottom ~30% of the page black These artifacts appear right before the system freezes. I've installed Ubuntu 12.04 LTS and after several failed attempts to get my dual monitor setup to work properly I tried installing the new 12.10 version, hoping that this new version would have this problem solved... Unfortunatly, that was not the case, so I reverted to Ubuntu 12.04. I've tried all the drivers in the Additional Drivers application (even the experimental ones), I've also tried the nvidia-current package from the PPA repository ubuntu-x-swat/x-updates as well as the nouveau OSS driver. Nothing (except no driver at all with a 640*480 resolution) at all seems stable. Here is the info of my graphic card: alix@alix-E500:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8400M G] (rev a1) alix@alix-E500:~$ sudo lshw -C video [sudo] password for alix: *-display description: VGA compatible controller product: G86 [GeForce 8400M G] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fe0e0000-fe0fffff Right now, I don't even have my 22" monitor connected as I can't even get my laptop display to work properly and without freezes. I've searched, read and tried all that I could (over several fresh reinstalls) to fix the problem, but so far, no solution has proven definitive. I'm sorry I can't precise which symptom maps to each driver but I've been trying to solve this one on my own without logging what I'm doing, perhaps someone here will be able to point me to a certain-fix solution, if not I'll keep updating this question as I go along. Please let me know if any more info is needed to pinpoint the exact problem. Trying out NVIDIA accelerated graphics driver (version 173). The scrolling, minimizing / maximizing windows takes between 2 and 5 seconds to finalize. Context menus also pop up very slowly and the typing seems delayed by ~1 second. No critical issues so far. Firefox rendering of the Save Edits button is consistently messed up (random black lines in the top). Trying out NVIDIA accelerated graphics driver (version current) [Recommended]. All the delays mentioned above and the buggy rendering of the Save Edits button are gone, but I'm noticing that the whole screen flashes black for a couple of microseconds and while I was writing this test for the first time, the bottom 30% of the screen went black and I couldn't do anything (not even Ctrl + Alt + F1 would work). Had to force a hard reset. Also, the system hanged a little for a couple of seconds with the fade out of the "Restart" menu. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-304). Same symptoms as before, it crashed once while I was trying to install Chromium and again after a hard reset when I was trying to remove the driver. The bottom of the screen did not went black and I could move my mouse both times. Ctrl + Alt + F1 didn't work. The ugly-colored pattern also showed up during the second boot. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-307). The system crashed as soon as I clicked something. Had to do a fresh re-install. Trying out Nouveau: Accelerated Open Source driver for nVidia cards. Artifacts still show up during boot but other than that this one seems stable. As soon as I connected my second monitor, the responsiveness dropped a lot, animations and video are somewhat slow. I'm gonna try this solution http://askubuntu.com/a/98871/9018 later on.

    Read the article

  • "ERROR:Could not find java.nio.file.Paths" when using Oracle JDK 1.7

    - by Ankit
    I want to try out some features rolled out in Oracle's new JDK 1.7. I followed the post:- Oracle JDK 1.7 but the post doesn't seem to help. I was trying to fetch out the structure for java.nio.file.Paths class file but got the following error:- buffer@ankit:~$ javap java.nio.file.Paths ERROR:Could not find java.nio.file.Paths However i can easily get the information about class structures till JAVA SE 1.6, here is an example:- buffer@ankit:~$ javap java.lang.Object Compiled from "Object.java" public class java.lang.Object{ public java.lang.Object(); public final native java.lang.Class getClass(); public native int hashCode(); public boolean equals(java.lang.Object); protected native java.lang.Object clone() throws java.lang.CloneNotSupportedException; public java.lang.String toString(); public final native void notify(); public final native void notifyAll(); public final native void wait(long) throws java.lang.InterruptedException; public final void wait(long, int) throws java.lang.InterruptedException; public final void wait() throws java.lang.InterruptedException; protected void finalize() throws java.lang.Throwable; static {}; } Running java -version gives the following result:- buffer@ankit:~$ java -version java version "1.7.0_09" Java(TM) SE Runtime Environment (build 1.7.0_09-b05) Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode) SYSTEM INFORMATION buffer@ankit:~$ sudo update-alternatives --config java [sudo] password for buffer: There are 4 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java 1051 manual mode 3 /usr/lib/jvm/jdk1.7.0_09/ 1 manual mode * 4 /usr/lib/jvm/jdk1.7.0_09/bin/java 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javac There are 2 choices for the alternative javac (providing /usr/bin/javac). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 manual mode * 2 /usr/lib/jvm/jdk1.7.0_09/bin/javac 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javaws There are 3 choices for the alternative javaws (providing /usr/bin/javaws). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/javaws 1060 manual mode * 3 /usr/lib/jvm/jdk1.7.0_09/bin/javaws 1 manual mode The directory structure of /usr/lib/jvm/ is as follows:- buffer@ankit:~$ ls -l /usr/lib/jvm/ total 24 lrwxrwxrwx 1 root root 24 Dec 2 2011 default-java -> java-1.6.0-openjdk-amd64 drwxr-xr-x 4 root root 4096 Nov 8 16:24 java-1.5.0-gcj-4.6 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-1.6.0-openjdk -> java-1.6.0-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 00:01 java-1.6.0-openjdk-amd64 -> java-6-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 06:59 java-1.7.0-openjdk-amd64 -> java-7-openjdk-amd64 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-6-openjdk -> java-1.6.0-openjdk-amd64 drwxr-xr-x 7 root root 4096 Nov 8 16:24 java-6-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 16:24 java-6-openjdk-common drwxr-xr-x 5 root root 4096 Nov 8 05:48 java-7-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 05:48 java-7-openjdk-common drwxr-xr-x 8 buffer buffer 4096 Sep 25 09:08 jdk1.7.0_09 Any help would be highly appreciated.

    Read the article

  • Android: Determine when an app is being finalized vs destroyed for screen orientation change

    - by Matt
    Hi all, I am relatively new to the Android world and am having some difficultly understanding how the whole screen orientation cycle works. I understand that when the orientation changes from portrait to landscape or vice versa the activity is destroyed and then re-created. Thus all the code in the onCreate function will run again. So here's my situation: I have an app that I am working on where it logs into a website, retrieves data, and displays it to the user. While this is all done in background threads, the code that starts these threads is in the onCreate function. Now, the problem lies in that whenever the user changes the screen orientation, the app will log in, retrieve the data, and display it to the user again. What I would like to do is set a boolean that tells the app if it is logged in or not so it knows whether or not it must log in when the onCreate function is called. So long as the app is in memory the HttpClient will exist and contain the cookies from logging the user in but when the app is killed by the system those will go away. So I would assume that I need to do something like setting the logged in boolean to false when the app is killed but since onDestroy is called when the screen is rotated how is this possible? I also looked into the finalize function and isFinishing() but those seem to not be working. Shorter version: How can I distinguish between when an app is being killed from memory from when an activity is being rotated and different code for each event? Any help or a point in the right direction is greatly appreciated. Thank you!

    Read the article

  • Load dll's from Environment Variable Path from a service

    - by Paulo Manuel Santos
    We install Matlab Runtime on a machine, then we restart a .net windows service that invokes methods from the Matlab Runtime. The problem is that we receive TypeInitializationException errors until we restart windows. We think this happens because Environment Variables are not changed on services until restart and Matlab uses the %Path% variable to reference it's core DLL's. My question is, do you think I can change the %Path% variable so that Matlab will use it when referencing the core dll's for it's engine? Or is it possible to add a directory to the runtime DLL loading mechanism of .NET so that those Matlab core dll's would be referenced correctly without restarting the machine? Here is the exception we get System.TypeInitializationException: The type initializer for 'MatlabCalculation.Calculation' threw an exception. ---> System.TypeInitializationException: The type initializer for 'MathWorks.MATLAB.NET.Utility.MWMCR' threw an exception. ---> System.DllNotFoundException: Unable to load DLL 'mclmcrrt710.dll': Kan opgegeven module niet vinden. (Exception from HRESULT: 0x8007007E) at MathWorks.MATLAB.NET.Utility.MWMCR.mclmcrInitialize() at MathWorks.MATLAB.NET.Utility.MWMCR..cctor() --- End of inner exception stack trace --- at MatlabCalculation.Calculation..cctor() --- End of inner exception stack trace --- at MatlabCalculation.Calculation.Finalize() "Kan opgegeven module niet vinden" = "The specified module not found"

    Read the article

  • C# Win Forms Access Violation Exception

    - by Goober
    I keep getting the following error: System.AccessViolationException was unhandled Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Source="FEDivaNET" StackTrace: at Diva.Handles.FEDivaObject.dropReference() at Diva.Handles.FEDivaObject.!FEDivaObject() at Diva.Handles.FEDivaObject.Dispose(Boolean ) at Diva.Handles.FEDivaObject.Finalize() InnerException: Any ideas what the issue could be? - I'm using a library that is written in C++ and isn't designed for multithreading, yet I'm hammering it about 3000 times with requests every 6 minutes. CODE delegate void SetTextCallback(string mxID, string text); public void UpdateLog(string mxID, string text) { //lock (thisLock) //{ if (listBoxProcessLog.InvokeRequired) { SetTextCallback d = new SetTextCallback(UpdateLog); this.BeginInvoke(d, new object[] { mxID, text }); } else { //Get a reference to the datatable assigned as the datasource. //DataTable logDT = (DataTable)listBoxProcessLog.DataSource; //logDT.Rows.Add(DateTime.Now + " - " + mxID + ": " + text); if (text.Contains("COMPLETE") || (text.Contains("FAILED"))) { if (progressBar1.Value <= progressBar1.MaxValue) { progressBar1.Value += 1; } } } //} } Baring in mind that even when the Lock and the DataTable weren't commented out, the error still occurred!

    Read the article

  • error while loadin applet in web application

    - by pallavi
    I want to run my applet on web application, but i got some error which i mentioned below please help me to get out of this problem ============================================================================================= Java Plug-in 1.7.0 Using JRE version 1.7.0-ea-b116 Java HotSpot(TM) Client VM User home directory = C:\Users\HONEY c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to java.lang.RuntimeException: java.lang.NoClassDefFoundError: mp3$1 at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source) at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.lang.NoClassDefFoundError: mp3$1 at mp3.(mp3.java:93) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source) at java.lang.reflect.Constructor.newInstance(Unknown Source) at java.lang.Class.newInstance0(Unknown Source) at java.lang.Class.newInstance(Unknown Source) at sun.plugin2.applet.Plugin2Manager$12.run(Unknown Source) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) Caused by: java.lang.ClassNotFoundException: mp3$1 at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source) at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source) at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source) at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) ... 16 more Caused by: java.io.IOException: open HTTP connection failed:http://viscous10.webng.com/mp3/mp3$1.class at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) ... 21 more Exception: java.lang.RuntimeException: java.lang.NoClassDefFoundError: mp3$1 ========================================================================================== but it happens only if i run applet with events and in simple applet i never occurred thanx

    Read the article

  • Attempted to read or write protected memory-Sql Compact and .NEt

    - by Jankhana
    I'm using Sql Compact3.5 as my DB with C# .NET . I have a strange problem with my application. I'm running the code in two PC with same configuration except the Sql Compact installed. In one PC where Sql Compact3.5 is not installed I'm getting this strange error: Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Inner Exception : Stack Trace : at System.Data.SqlServerCe.NativeMethods.CloseStore(IntPtr pSeStore) at System.Data.SqlServerCe.SqlCeConnection.ReleaseNativeInterfaces() at System.Data.SqlServerCe.SqlCeConnection.Dispose(Boolean disposing) at System.Data.SqlServerCe.SqlCeConnection.Finalize() Source : System.Data.SqlServerCe I don't know where i have went wrong. I checked my code and included try catch everywhere. I'm handling Unhandled exception also using this . I am getting this error from a console application which I'm starting from Windows Form. In both the application I've inserted the Unhandled Exception coding and it's getting executed and getting return to the texxt file. But still Microsoft Don't Error Report is getting generated and I get that Dialog box!!! Y still that dialog box is getting generated is the trouble!!! Is there any way to supress that Dialog box??? Y I'm getting this box when I'm handling the exception and it's executing my catch handler??? In another PC where SQL Compact is installed no error I get!!! Any idea y is that so???

    Read the article

  • C#/.Net Error: MySql.Data Object reference not set to an instance of an object.

    - by Simon
    Hello, I get this exception on my Windows 7 64bit in application running in VS 2008 express. I am using Connector/Net 6.2.2.0: Message: Object reference not set to an instance of an object. Source: MySql.Data in MySql.Data.MySqlClient.NativeDriver.GetResult(Int32& affectedRow, Int32& insertedId) Stack trace: in MySql.Data.MySqlClient.Driver.GetResult(Int32 statementId, Int32& affectedRows, Int32& insertedId) in MySql.Data.MySqlClient.Driver.NextResult(Int32 statementId) in MySql.Data.MySqlClient.MySqlDataReader.NextResult() in MySql.Data.MySqlClient.MySqlDataReader.Close() in MySql.Data.MySqlClient.MySqlConnection.Close() in MySql.Data.MySqlClient.MySqlConnection.Dispose(Boolean disposing) in System.ComponentModel.Component.Finalize() No inner exception. This exception is unhalted and the debugger dont point on any code line. It just say "Object reference not set to an instance of an object. MySql.Data" This error is really hard to repeat. On my Windows XP 32bit is all ok. Could it be error in 64bit Windows 7? Thank you very much for your answers. Regards, simon

    Read the article

  • Null Pointer Exception in Primavera P6 8.1

    - by gwrichard
    I am getting a null pointer exception in a Primavera P6 8.1 installation. The exception only occurs in one section of the web-client: Application settings.P6 web and the P6 API are deployed on the same WebLogic (10.3.5) node running on a Windows Server 2008 R2 installation. I have done this installation using this same software stack a dozen times and don't have this issue on any of the other installs. Exact error below: Match: beginTraversal Match: digest selected JREDesc: JREDesc[version 1.6.0_20+, heap=-1--1, args=null, href=http://java.sun.com/products/autodl/j2se, sel=false, null, null], JREInfo: JREInfo for index 0: platform is: 1.7 product is: 1.7.0_17 location is: http://java.sun.com/products/autodl/j2se path is: C:\Program Files (x86)\Java\jre7\bin\javaw.exe args is: null native platform is: Windows, x86 [ x86, 32bit ] JavaFX runtime is: JavaFX 2.2.7 found at C:\Program Files (x86)\Java\jre7\ enabled is: true registered is: true system is: true Match: ignoring maxHeap: -1 Match: ignoring InitHeap: -1 Match: digesting vmargs: null Match: digested vmargs: [JVMParameters: isSecure: true, args: ] Match: JVM args after accumulation: [JVMParameters: isSecure: true, args: ] Match: digest LaunchDesc: http://localhost:7001/p6/action/jnlp/appletsjnlp.jnlp?mainClass=com.primavera.pvapplets.adminpreferences.AdminPreferencesApplet&classPath=adminpreferences.jar,prm-applets-common.jar,forms-1.0.7.jar,prm-guisupport.jar,prm-to.jar,jide.jar,tablesupport.jar,formsupport.jar,applets-bo.jar,commons-lang.jar,prm-common.jar,resource_strings.jar,prm-img.jar,commons-logging.jar&name=AdminPreferences&version=8.1.2.0.0602 Match: digest properties: [] Match: JVM args: [JVMParameters: isSecure: true, args: ] Match: endTraversal .. Match: JVM args final: Match: Running JREInfo Version match: 1.7.0.17 == 1.7.0.17 Match: Running JVM args match: have:<> satisfy want:<> Java Plug-in 10.17.2.02 Using JRE version 1.7.0_17-b02 Java HotSpot(TM) Client VM User home directory = C:\Users\gwrichard ---------------------------------------------------- c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to <n> ----------------------------------------------------

    Read the article

  • Accessing global variable in multithreaded Tomcat server

    - by jwegan
    I have a singleton object that I construct like thus: private static volatile KeyMapper mapper = null; public static KeyMapper getMapper() { if(mapper == null) { synchronized(Utils.class) { if(mapper == null) { mapper = new LocalMemoryMapper(); } } } return mapper; } The class KeyMapper is basically a synchronized wrapper to HashMap with only two functions, one to add a mapping and one to remove a mapping. When running in Tomcat 6.24 on my 32bit Windows machine everything works fine. However when running on a 64 bit Linux machine (CentOS 5.4 with OpenJDK 1.6.0-b09) I add one mapping and print out the size of the HashMap used by KeyMapper to verify the mapping got added (i.e. verify size = 1). Then I try to retrieve the mapping with another request and I keep getting null and when I checked the size of the HashMap it was 0. I'm confident the mapping isn't accidentally being removed since I've commented out all calls to remove (and I don't use clear or any other mutators, just get and put). The requests are going through Tomcat 6.24 (configured to use 200 threads with a minimum of 4 threads) and I passed -Xnoclassgc to the jvm to ensure the class isn't inadvertently getting garbage collected (jvm is also running in -server mode). I also added a finalize method to KeyMapper to print to stderr if it ever gets garbage collected to verify that it wasn't being garbage collected. I'm at my wits end and I can't figure out why one minute the entry in HashMap is there and the next it isn't :(

    Read the article

  • Do COM Dll References Require Manual Disposal? If so, How?

    - by Drew
    I have written some code in VB that verifies that a particular port in the Windows Firewall is open, and opens one otherwise. The code uses references to three COM DLLs. I wrote a WindowsFirewall class, which Imports the primary namespace defined by the DLLs. Within members of the WindowsFirewall class I construct some of the types defined by the DLLs referenced. The following code isn't the entire class, but demonstrates what I am doing. Imports NetFwTypeLib Public Class WindowsFirewall Public Shared Function IsFirewallEnabled as Boolean Dim icfMgr As INetFwMgr icfMgr = CType(System.Activator.CreateInstance(Type.GetTypeFromProgID("HNetCfg.FwMgr")), INetFwMgr) Dim profile As INetFwProfile profile = icfMgr.LocalPolicy.CurrentProfile Dim fIsFirewallEnabled as Boolean fIsFirewallEnabled = profile.FirewallEnabled return fIsFirewallEnabled End Function End Class I do not reference COM DLLs very often. I have read that unmanaged code may not be cleaned up by the garbage collector and I would like to know how to make sure that I have not introduced any memory leaks. Please tell me (a) if I have introduced a memory leak, and (b) how I may clean it up. (My theory is that the icfMgr and profile objects do allocate memory that remains unreleased until after the application closes. I am hopeful that setting their references equal to nothing will mark them for garbage collection, since I can find no other way to dispose of them. Neither one implements IDisposable, and neither contains a Finalize method. I suspect they may not even be relevant here, and that both of those methods of releasing memory only apply to .Net types.)

    Read the article

  • Should I use IDisposable for purely managed resources?

    - by John Gietzen
    Here is the scenario: I have an object called a Transaction that needs to make sure that only one entity has permission to edit it at any given time. In order to facilitate a long-lived lock, I have the class generating a token object that can be used to make the edits. You would use it like this: var transaction = new Transaction(); using (var tlock = transaction.Lock()) { transaction.Update(data, tlock); } Now, I want the TransactionLock class to implement IDisposable so that its usage can be clear. But, I don't have any unmanaged resources to dispose. however, the TransctionLock object itself is a sort of "unmanaged resource" in the sense that the CLR doesn't know how to properly finalize it. All of this would be fine and dandy, I would just use IDisposable and be done with it. However, my issue comes when I try to do this in the finalizer: ~TransactionLock() { this.Dispose(false); } I want the finalizer to release the transaction from the lock, if possible. How, in the finalizer, do I detect if the parent transaction (this.transaction) has already been finalized? Is there a better pattern I should be using? The Transaction class looks something like this: public sealed class Transaction { private readonly object lockMutex = new object(); private TransactionLock currentLock; public TransactionLock Lock() { lock (this.lockMutex) { if (this.currentLock != null) throw new InvalidOperationException(/* ... */); this.currentLock = new TransactionLock(this); return this.currentLock; } } public void Update(object data, TransactionLock tlock) { lock (this.lockMutex) { this.ValidateLock(tlock); // ... } } internal void ValidateLock(TransactionLock tlock) { if (this.currentLock == null) throw new InvalidOperationException(/* ... */); if (this.currentLock != tlock) throw new InvalidOperationException(/* ... */); } internal void Unlock(TransactionLock tlock) { lock (this.lockMutex) { this.ValidateLock(tlock); this.currentLock = null; } } }

    Read the article

  • ActionController::RoutingError (No route matches {:action=>"show", :controller=>"users", :id=>nil}):

    - by Matt Bishop
    I have been trying to fix this routing error for a long time. I would appreciate any assistance! This error is preventing me from being able to authenticate. Here is what I am getting in my Heroku logs. app/controllers/authentications_controller.rb:12:in `create' ActionController::RoutingError (No route matches {:action=>"show", :controller=>"users", :id=>nil}) Here is the routes.rb file: Company::Application.routes.draw do resources :profile_individual resources :careers match 'careers' => 'careers#index' match 'about' => 'about#index' constraints(:subdomain => /^$|www/) do devise_for :users resources :authentications, :identities #, :beta_invitations resources :users do resources :invitations, :controller => 'UserInvitation' do post :upload, :on => :collection get :email_template, :on => :collection get :plaintext_template, :on => :collection get :facebook_invitation, :on => :collection end member do get :summary get :recruits get :friends_events get :events_near_me get :recent_activity get :impact get :campaigns end end resources :password_resets do get 'password_reset' => 'password_resets#show', :as => 'password_reset' end resources :events, :only => [:new, :index, :create] resources :organizations, :only => [:index, :create] resources :orders do post :ipn, :on => :member resource :payment do member do post :relay_response get :receipt end end resource :paypal_integration do member do get :authorize get :cancel post :finalize end end end match '/users/:id/impact/money/:d' => 'users#impact_money_graph', :constraints => {:d => /\d+{4}_\d+{2}-\d+{2}/}, :as => :user_impact_money match '/users/:id/impact/money' => 'users#impact_money_graph', :as => :user_impact_money match '/users/:id/impact/recruits/:d' => 'users#impact_recruits_graph', :constraints => {:d => /\d+{4}_\d+{2}-\d+{2}/}, :as => :user_impact_recruits match '/users/:id/impact/recruits' => 'users#impact_recruits_graph', :as => :user_impact_recruits match '/auth/failure' => 'authentications#failure' match '/auth/:provider/callback' => 'authentications#create' match '/auth/:provider/callback' => 'authentications#show', :controller => 'users', :as => :login match '/logout' => 'authentications#destroy', :as => :logout match '/login' => 'authentications#new', :as => :login match "/join_team/:id" => "team_members#join", :as => :join_team match "/rsvp/:id" => "rsvps#show", :as => :rsvp match "/signup" => 'authentications#signup', :as => :signup match "/beacon/:id.gif" => "email_beacons#show", :as => :email_beacon root :to => "homes#show" match '/corporate_giving' => "homes#corporate_giving" end constraints(Subdomain) do resource :organization, :path => "/", :only => [:edit, :update] do member do get :org_photos_videos get :org_recent_activity end end resources :events, :except => [:index] do post :publish, :on => :member resource :supporter_invite resource :team_management do post :mailer, :on => :member end resource :team_member do post :invite, :on => :member end resource :rsvp do put :make_order, :on => :collection get :make_order, :on => :collection end resources :invites do post :upload, :on => :collection end resources :ticket_tiers, :team_members end match "/events" => redirect("/") root :to => "organizations#show" end namespace :admin do resources :stats resources :organizations resources :campaigns do resources :rewards resources :contents put :header, :action => 'header_update' end resources :users do member do post :grant_access post :revoke_access end end resources :nonprofits do member do put :approve put :revoke end end end resources :campaigns do get :find_charities, :on => :collection get :how_many_charities, :on => :collection member do post :join get :join post :header, :action => 'header_creation' put :header, :action => 'header_update' end resources :rewards resources :contents resource :donations do resource :paypal_integration, :controller => 'donations' do member do get :authorize get :cancel post :finalize end end end end match '/campaigns/:id/graph/:d' => 'campaigns#graph', :constraints => {:d => /\d+{4}_\d+ {2}-\d+{2}/}, :as => :graph_campaign match '/campaigns/:id/graph' => 'campaigns#graph', :as => :graph_campaign resources :business_campaigns, :controller => 'campaigns' resources :businesses do put :logo, :on => :collection, :action => 'upload_logo' member do get :summary get :recruits get :friends_events get :events_near_me get :recent_activity get :impact get :campaigns end end resources :nonprofit_campaigns, :controller => 'campaigns' resources :nonprofits do put :logo, :on => :collection, :action => 'upload_logo' member do get :summary get :recruits get :friends_events get :events_near_me get :recent_activity get :impact get :campaigns get :supporting_campaigns end end resources :publicities match '/campaigns/:campaign_id/rewards/:id' => 'campaigns#reward', :via => :get match "/robots.txt" => "application#robots_txt" match "/beta_invitations" => redirect('/') resource :sitemap resources :referrals end Here is my authentications_controller.rb file class AuthenticationsController < ApplicationController skip_before_filter :require_beta_access before_filter :redirect_to_profile_if_logged_in, :only => [:create, :new] layout :resolve_layout def create omniauth = request.env["omniauth.auth"] authentication = Authentication.find_by_provider_and_uid(omniauth['provider'], omniauth['uid']) if authentication && authentication.user.present? sign_in(:user, authentication.user) redirect_to session[:redirect_to] || user_path(current_user, :subdomain => nil) elsif current_user current_user.authentications.create!(:provider => omniauth['provider'], :uid => omniauth['uid']) redirect_to session[:redirect_to] || user_path(current_user, :subdomain => nil) else user = User.new user.apply_omniauth(omniauth) logger.debug "=======================auth=============================" logger.debug session[:referrer_token] logger.debug "========================================================" if session[:referrer_token] publicity = Publicity.find_by_token(session[:referrer_token]) user.invited_by = publicity user.recruited_by = publicity end if user.save sign_in(user) unless session[:redirect_to] session[:referrer_token] = nil end redirect_to session[:redirect_to] || user_path(current_user, :subdomain => nil) #redirect_to session[:redirect_to] || campaigns_url(:tc => request.env['omniauth.params']['tc']) #tc is for AB testing else session[:omniauth] = omniauth.except('extra') redirect_to signup_path end end end def failure flash[:error] = "Please check your email and password and try again" redirect_to login_path end def destroy reset_session redirect_to root_path end def signup # end private def redirect_to_profile_if_logged_in redirect_to user_path(current_user.permalink) if current_user end def resolve_layout case action_name when "new", "signup" "authentication" else "selfcontained" end end end I am adding my appplication_controller.rb too: class ApplicationController < ActionController::Base #Wrote by George for beta users -before_filter :require_beta_access before_filter :save_referrer_token protect_from_forgery helper_method :organization_admin?, :team_member?, :profile_url, :current_profile def set_headers # Set our headers here end def save_referrer_token #session.delete(:referrer_token) if params[:ref] publicity = Publicity.find_by_token(params[:ref]) logger.debug "========================================================" logger.debug current_profile.nil? logger.debug publicity.creator logger.debug current_profile logger.debug current_profile != publicity.creator session[:referrer_token] = params[:ref] if current_profile.nil? or publicity.creator != current_profile logger.debug session[:referrer_token] logger.debug "========================================================" end end def robots_txt robots = File.read(Rails.root + "public/robots.#{Rails.env}.txt") render :text => robots, :layout => false, :content_type => "text/plain" end def load_organization @organization = Organization.find_by_permalink(request.subdomain) raise ActiveRecord::RecordNotFound if @organization.nil? end def require_user unless current_user session[:redirect_to] = request.url redirect_to login_url(:host => request.domain) end end def require_beta_access if !current_user redirect_to root_url(:host => request.domain) elsif !current_user.beta_access? redirect_to new_beta_invitation_url(:host => request.domain) end end def require_organization_admin unless organization_admin? redirect_to root_url(:subdomain => @organization.permalink) end end def team_member? if current_user && @event.team_memberships.where(:user_id => current_user.id).count != 0 true end end def organization_admin? if current_user && current_user.beta_access? && @organization && @organization.memberships.where(:user_id => current_user.id, :role => 'admin').count != 0 true end end def profile_url(profile, opt = nil) if profile == current_user user_url(profile, :host => opt[:host]) elsif profile.is_a? BusinessProfile business_url(profile) elsif profile.is_a? NonprofitProfile nonprofit_url(profile) end end def set_current_profile(profile) session[:current_profile] = profile end def current_user @current_user ||= User.find_by_auth_token!(cookies[:auth_token]) if cookies[:auth_token] end def current_profile #if session session[:current_profile] || current_user #else # nil #end end IGIVEMORE_HTML5_OPTIOINS = { :style => 'z-index: 0;',:width => '290', :height => '200', :frameborder => '0', :url_params => {:wmode=>"opaque"} } def campaign_header_body(camp, opt = IGIVEMORE_HTML5_OPTIOINS) if camp.header_type == Campaign::HEADER_YOUTUBE youtube_html5(camp.header_url, opt).html_safe elsif camp.header_type == Campaign::HEADER_IMAGE "<img src=\"#{camp.header_url}\" width=\"#{opt[:width]}\" height=\"#{opt[:height]}\"/>'".html_safe else "Unsupported Type!!" end end def youtube_html5(url, opt) begin video = YouTubeIt::Client.new.video_by(url) video.embed_html5(opt).gsub(/http:\/\//,"https://") rescue => e "<div style='color:red; width:290px; height:100px; padding-top:100px'>Given Video URL has problem.</div>" end end end

    Read the article

  • sub domains with /etc/hosts and apache for gitorious

    - by QLands
    I managed to have a local install of Gitorious. Now I need to finalize the apache integration using a virtual server but nothing seems to work. See for example my /etc/hosts file: 127.0.0.1 localhost 172.26.17.70 darkstar.ilri.org darkstar 172.26.17.70 git.darkstar.ilri.org My vhosts.conf has the following entries: # # Use name-based virtual hosting. # NameVirtualHost *:80 <VirtualHost *:80> <Directory /srv/httpd/htdocs> Options Indexes FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> ServerName darkstar.ilri.org DocumentRoot /srv/httpd/htdocs ErrorLog /var/log/httpd/error_log AddHandler cgi-script .cgi </VirtualHost> <VirtualHost *:80> <Directory /srv/httpd/git.darkstar.ilri.org/gitorious/public> Options FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from All </Directory> AddHandler cgi-script .cgi DocumentRoot /srv/httpd/git.darkstar.ilri.org/gitorious/public ServerName git.darkstar.ilri.org ErrorLog /var/www/git.darkstar.ilri.org/log/error.log CustomLog /var/www/git.darkstar.ilri.org/log/access.log combined AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript text/css application/x-javascript BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$"> ExpiresActive On ExpiresDefault "access plus 1 year" </FilesMatch> FileETag None RewriteEngine On RewriteCond %{DOCUMENT_ROOT}/system/maintenance.html -f RewriteCond %{SCRIPT_FILENAME} !maintenance.html RewriteRule ^.*$ /system/maintenance.html [L] </VirtualHost> Now, when I go with Firefox to darkstar.ilri.org it shows the default Apache screen: "It works!". but when I go to git.darkstar.ilri.org it waits for few seconds then falls to darkstar.ilri.org and the default apache page. No error is reported. If I run httpd -S I get: VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server darkstar.ilri.org (/etc/httpd/extra/httpd-vhosts.conf:21) port 80 namevhost darkstar.ilri.org (/etc/httpd/extra/httpd-vhosts.conf:21) port 80 namevhost git.darkstar.ilri.org (/etc/httpd/extra/httpd-vhosts.conf:37) Syntax OK The funny thing is that if I configure gotirious in a host called gitrepository, add 127.0.0.1 gitrepository and go with Firefox to gitrepository.. Gitorious works... But why not with git.darkstar.ilri.org? Many thanks in advance.

    Read the article

  • Breaking through the class sealing

    - by Jason Crease
    Do you understand 'sealing' in C#?  Somewhat?  Anyway, here's the lowdown. I've done this article from a C# perspective, but I've occasionally referenced .NET when appropriate. What is sealing a class? By sealing a class in C#, you ensure that you ensure that no class can be derived from that class.  You do this by simply adding the word 'sealed' to a class definition: public sealed class Dog {} Now writing something like " public sealed class Hamster: Dog {} " you'll get a compile error like this: 'Hamster: cannot derive from sealed type 'Dog' If you look in an IL disassembler, you'll see a definition like this: .class public auto ansi sealed beforefieldinit Dog extends [mscorlib]System.Object Note the addition of the word 'sealed'. What about sealing methods? You can also seal overriding methods.  By adding the word 'sealed', you ensure that the method cannot be overridden in a derived class.  Consider the following code: public class Dog : Mammal { public sealed override void Go() { } } public class Mammal { public virtual void Go() { } } In this code, the method 'Go' in Dog is sealed.  It cannot be overridden in a subclass.  Writing this would cause a compile error: public class Dachshund : Dog { public override void Go() { } } However, we can 'new' a method with the same name.  This is essentially a new method; distinct from the 'Go' in the subclass: public class Terrier : Dog { public new void Go() { } } Sealing properties? You can also seal seal properties.  You add 'sealed' to the property definition, like so: public sealed override string Name {     get { return m_Name; }     set { m_Name = value; } } In C#, you can only seal a property, not the underlying setters/getters.  This is because C# offers no override syntax for setters or getters.  However, in underlying IL you seal the setter and getter methods individually - a property is just metadata. Why bother sealing? There are a few traditional reasons to seal: Invariance. Other people may want to derive from your class, even though your implementation may make successful derivation near-impossible.  There may be twisted, hacky logic that could never be second-guessed by another developer.  By sealing your class, you're protecting them from wasting their time.  The CLR team has sealed most of the framework classes, and I assume they did this for this reason. Security.  By deriving from your type, an attacker may gain access to functionality that enables him to hack your system.  I consider this a very weak security precaution. Speed.  If a class is sealed, then .NET doesn't need to consult the virtual-function-call table to find the actual type, since it knows that no derived type can exist.  Therefore, it could emit a 'call' instead of 'callvirt' or at least optimise the machine code, thus producing a performance benefit.  But I've done trials, and have been unable to demonstrate this If you have an example, please share! All in all, I'm not convinced that sealing is interesting or important.  Anyway, moving-on... What is automatically sealed? Value types and structs.  If they were not always sealed, all sorts of things would go wrong.  For instance, structs are laid-out inline within a class.  But what if you assigned a substruct to a struct field of that class?  There may be too many fields to fit. Static classes.  Static classes exist in C# but not .NET.  The C# compiler compiles a static class into an 'abstract sealed' class.  So static classes are already sealed in C#. Enumerations.  The CLR does not track the types of enumerations - it treats them as simple value types.  Hence, polymorphism would not work. What cannot be sealed? Interfaces.  Interfaces exist to be implemented, so sealing to prevent implementation is dumb.  But what if you could prevent interfaces from being extended (i.e. ban declarations like "public interface IMyInterface : ISealedInterface")?  There is no good reason to seal an interface like this.  Sealing finalizes behaviour, but interfaces have no intrinsic behaviour to finalize Abstract classes.  In IL you can create an abstract sealed class.  But C# syntax for this already exists - declaring a class as a 'static', so it forces you to declare it as such. Non-override methods.  If a method isn't declared as override it cannot be overridden, so sealing would make no difference.  Note this is stated from a C# perspective - the words are opposite in IL.  In IL, you have four choices in total: no declaration (which actually seals the method), 'virtual' (called 'override' in C#), 'sealed virtual' ('sealed override' in C#) and 'newslot virtual' ('new virtual' or 'virtual' in C#, depending on whether the method already exists in a base class). Methods that implement interface methods.  Methods that implement an interface method must be virtual, so cannot be sealed. Fields.  A field cannot be overridden, only hidden (using the 'new' keyword in C#), so sealing would make no sense.

    Read the article

  • Sending Outlook Invites

    - by Daniel Moth
    Sending an Outlook invite for a meeting (also referred to as S+ in Microsoft) is a simple thing to get right if you just run the quick mental check below, which is driven by visual cues in the Outlook UI. I know that some folks don’t do this often or are new to Outlook, so if you know one of those folks share this blog post with them and if they read nothing else ask them to read step 7. Add on the To line the folks that you want to be at the meeting. Indicate optional invitees. Click on the “To” button to bring up the dialog that lets you move folks to be Optional (you can also do this from the Scheduling Assistant). Set the Reminder according to the attendee that has to travel the most. 5 minutes is the minimum. Use the Response Options and uncheck the "Request Response" if your event is going ahead regardless of who can make it or not, i.e. if everyone is optional. Don’t force every recipient to make an extra click, instead make the extra click yourself - you are the organizer. Add a good subject Make the subject such that just by reading it folks know what the meeting is about. Examples, e.g. "Review…", "Finalize…", "XYZ sync up" If this is only between two people and what is commonly referred to as a one to one, the subject would be something like "MyName/YourName 1:1" Write the subject in such a way that when the recipient sees this on their calendar among all the other items, they know what this meeting is about without having to see location, recipients, or any other information about the invite. Add a location, typically a meeting room. If recipients are from different buildings, schedule it where the folks that are doing the other folks a favor live. Otherwise schedule it wherever the least amount of people will have to travel. If you send me an invite to come to your building, and there is more of us than you, you are silently sending me the message that you are doing me a favor so if you don’t want to do that, include a note of why this is in your building, e.g. "Sorry we are slammed with back to back meetings today so hope you can come over to our building". If this is in someone's office, the location would be something like "Moth's office (7/666)" where in parenthesis you see the office location. If some folks are remote in another building/country, or if you know you picked a time which wasn't free for everyone, add an Online option (click the Lync Meeting button). Add a date and time. This MUST be at a time that is showing on the recipients’ calendar as FREE or at worst TENTATIVE. You can check that on the Scheduling Assistant. The reality is that this is not always possible, so in that case you MUST say something about it in the Invite Body, e.g. "Sorry I can see X has a conflict, but I cannot find a better slot", or "With so many of us there are some conflicts and I cannot find a better slot so hope this works", or "Apologies but due to Y we must have this meeting at this time and I know there are some conflicts, hope you can make it anyway". When you do that, I better not be able to find a better slot myself for all of us, and of course when you do that you have implicitly designated the Busy folks as optional. Finally, the body of the invite. This has the agenda of the meeting and if applicable the courtesy apologies due to messing up steps 6 & 7. This should not be the introduction to the meeting, in other words the recipients should not be surprised when they see the invite and go to the body to read it. Notifying them of the meeting takes place via separate email where you explain the purpose and give them a heads up that you'll be sending an invite. That separate email is also your chance to attach documents, don’t do that as part of the invite. TIP: If you have sent mail about the meeting, you can then go to your sent folder to select the message and click the "Meeting" button (Ctrl+Alt+R). This will populate the body with the necessary background, auto select the mandatory and optional attendees as per the TO/CC line, and have a subject that may be good enough already (or you can tweak it). Long to write, but very quick to remember and enforce since most of it is common sense and the checklist is driven of the visual cues in the UI you use to send the invite. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Thread.Interrupt Is Evil

    - by Alois Kraus
    Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it).  After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was  crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this   static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

    Read the article

  • Android edtftpj/PRo SFTP heap worker problem

    - by Mr. Kakakuwa Bird
    Hi I am using edtftpj-pro3.1 trial copy in my android app to make SFTP connection with the server. After few connections with the server with 5-6 file transfers, my app is crashing with following exception. Is it causing the problem or what could be the problem?? I tried setParallelMode(false) in SSHFTPClient, but it is not working. Exception i'm getting is, 05-31 18:28:12.661: ERROR/dalvikvm(589): HeapWorker is wedged: 10173ms spent inside Lcom/enterprisedt/net/j2ssh/sftp/SftpFileInputStream;.finalize()V 05-31 18:28:12.661: INFO/dalvikvm(589): DALVIK THREADS: 05-31 18:28:12.661: INFO/dalvikvm(589): "main" prio=5 tid=3 WAIT 05-31 18:28:12.661: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4001b260 self=0xbd18 05-31 18:28:12.661: INFO/dalvikvm(589): | sysTid=589 nice=0 sched=0/0 cgrp=default handle=-1343993192 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.661: INFO/dalvikvm(589): - waiting on <0x122d70 (a android.os.MessageQueue) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:288) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.os.MessageQueue.next(MessageQueue.java:148) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.os.Looper.loop(Looper.java:110) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.app.ActivityThread.main(ActivityThread.java:4363) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.reflect.Method.invokeNative(Native Method) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.reflect.Method.invoke(Method.java:521) 05-31 18:28:12.661: INFO/dalvikvm(589): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 05-31 18:28:12.661: INFO/dalvikvm(589): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 05-31 18:28:12.661: INFO/dalvikvm(589): at dalvik.system.NativeStart.main(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): "Transport protocol 1" daemon prio=5 tid=29 NATIVE 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x44774768 self=0x3a7938 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=605 nice=0 sched=0/0 cgrp=default handle=3834600 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.platform.OSNetworkSystem.receiveStreamImpl(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.platform.OSNetworkSystem.receiveStream(OSNetworkSystem.java:478) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.PlainSocketImpl.read(PlainSocketImpl.java:565) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.SocketInputStream.read(SocketInputStream.java:87) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.SocketInputStream.read(SocketInputStream.java:67) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.fillbuf(BufferedInputStream.java:157) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.read(BufferedInputStream.java:346) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.read(BufferedInputStream.java:341) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.A.A((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.A.B((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.processMessages((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.startBinaryPacketProtocol((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.run((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "StreamFrameSender" prio=5 tid=27 TIMED_WAIT 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x44750a60 self=0x3964d8 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=603 nice=0 sched=0/0 cgrp=default handle=3761648 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): - waiting on <0x399478 (a com.corventis.gateway.ppp.StreamFrameSender) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:326) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.ppp.StreamFrameSender.run(StreamFrameSender.java:154) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "SftpActiveWorker" prio=5 tid=25 TIMED_WAIT 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447522b0 self=0x398e00 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=604 nice=0 sched=0/0 cgrp=default handle=3762704 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): - waiting on <0x3962d8 (a com.corventis.gateway.hostcommunicator.SftpActiveWorker) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:326) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.SftpActiveWorker.run(SftpActiveWorker.java:151) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "Thread-12" prio=5 tid=23 NATIVE 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4474aca8 self=0x115690 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=602 nice=0 sched=0/0 cgrp=default handle=878120 05-31 18:28:12.671: INFO/dalvikvm(589): at android.bluetooth.BluetoothSocket.acceptNative(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothSocket.accept(BluetoothSocket.java:287) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothServerSocket.accept(BluetoothServerSocket.java:105) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothServerSocket.accept(BluetoothServerSocket.java:91) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.bluetooth.BluetoothManager.openPort(BluetoothManager.java:215) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.bluetooth.BluetoothManager.open(BluetoothManager.java:84) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicator.open(PatchCommunicator.java:123) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicatorRunnable.run(PatchCommunicatorRunnable.java:134) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "HfGatewayApplication" prio=5 tid=21 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=0 dsCount=0 s=N obj=0x4472d9b0 self=0x120928 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=601 nice=0 sched=0/0 cgrp=default handle=1264672 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.Deflate.deflateInit2(Deflate.java:~1361) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.Deflate.deflateInit(Deflate.java:1316) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZStream.deflateInit(ZStream.java:127) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZStream.deflateInit(ZStream.java:120) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZOutputStream.(ZOutputStream.java:62) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.zipfile.ZipStorer.addStream(ZipStorer.java:211) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.zipfile.ZipStorer.createZip(ZipStorer.java:127) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicator.scanAndCompress(HostCommunicator.java:453) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicator.doWork(HostCommunicator.java:1434) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hf.HfGatewayApplication.doWork(HfGatewayApplication.java:621) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hf.HfGatewayApplication.run(HfGatewayApplication.java:546) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-10" prio=5 tid=19 TIMED_WAIT 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447287f8 self=0x1451b8 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=598 nice=0 sched=0/0 cgrp=default handle=1331920 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.VMThread.sleep(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.sleep(Thread.java:1306) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.sleep(Thread.java:1286) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.util.Watchdog.run(Watchdog.java:167) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-9" prio=5 tid=17 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=Y obj=0x44722c90 self=0x114e20 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=597 nice=0 sched=0/0 cgrp=default handle=1200048 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.time.Time.currentTimeMillis(Time.java:~77) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicatorState$1.run(PatchCommunicatorState.java:27) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-8" prio=5 tid=15 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=Y obj=0x44722430 self=0x124dd0 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=596 nice=0 sched=0/0 cgrp=default handle=1199848 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.time.Time.currentTimeMillis(Time.java:~80) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicatorState$1.run(HostCommunicatorState.java:35) 05-31 18:28:12.681: INFO/dalvikvm(589): "Binder Thread #2" prio=5 tid=13 NATIVE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4471ccc0 self=0x149b60 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=595 nice=0 sched=0/0 cgrp=default handle=1317992 05-31 18:28:12.681: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): "Binder Thread #1" prio=5 tid=11 NATIVE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447159a8 self=0x123298 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=594 nice=0 sched=0/0 cgrp=default handle=1164896 05-31 18:28:12.681: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "JDWP" daemon prio=5 tid=9 VMWAIT 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x4470f2a0 self=0x141a90 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=593 nice=0 sched=0/0 cgrp=default handle=1316864 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "Signal Catcher" daemon prio=5 tid=7 VMWAIT 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x4470f1e8 self=0x124970 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=592 nice=0 sched=0/0 cgrp=default handle=1316800 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "HeapWorker" daemon prio=5 tid=5 MONITOR 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x431b4550 self=0x141670 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=591 nice=0 sched=0/0 cgrp=default handle=1316400 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpSubsystemClient.closeHandle((null):~-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpSubsystemClient.closeFile((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFile.close((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFileInputStream.close((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFileInputStream.finalize((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: ERROR/dalvikvm(589): VM aborting 05-31 18:28:12.801: INFO/DEBUG(49): * ** * ** * ** * ** * ** * 05-31 18:28:12.801: INFO/DEBUG(49): Build fingerprint: 'google/passion/passion/mahimahi:2.1-update1/ERE27/24178:user/release-keys' 05-31 18:28:12.801: INFO/DEBUG(49): pid: 589, tid: 601 com.corventis.gateway.hf <<< 05-31 18:28:12.801: INFO/DEBUG(49): signal 11 (SIGSEGV), fault addr deadd00d 05-31 18:28:12.801: INFO/DEBUG(49): r0 00000026 r1 afe13329 r2 afe13329 r3 00000000 05-31 18:28:12.801: INFO/DEBUG(49): r4 ad081f50 r5 400091e8 r6 009b3a6a r7 00000000 05-31 18:28:12.801: INFO/DEBUG(49): r8 000002e8 r9 ad082ba0 10 ad082ba0 fp 00000000 05-31 18:28:12.801: INFO/DEBUG(49): ip deadd00d sp 46937c58 lr afe14373 pc ad035b4c cpsr 20000030 05-31 18:28:12.851: INFO/DEBUG(49): #00 pc 00035b4c /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #01 pc 00044d7c /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #02 pc 000162e4 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #03 pc 00016b60 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #04 pc 00016ce0 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #05 pc 00057b64 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #06 pc 00057cc0 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #07 pc 00057dd4 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #08 pc 00012ffc /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #09 pc 00019338 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #10 pc 00018804 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #11 pc 0004eed0 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #12 pc 0004eef8 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #13 pc 000426d4 /system/lib/libdvm.so 05-31 18:28:12.881: INFO/DEBUG(49): #14 pc 0000fd74 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): #15 pc 0000f840 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): code around pc: 05-31 18:28:12.881: INFO/DEBUG(49): ad035b3c 58234808 b1036b9b f8df4798 2026c01c 05-31 18:28:12.881: INFO/DEBUG(49): ad035b4c 0000f88c ef52f7d8 0004c428 fffe631c 05-31 18:28:12.881: INFO/DEBUG(49): ad035b5c fffe94f4 000002f8 deadd00d f8dfb40e 05-31 18:28:12.881: INFO/DEBUG(49): code around lr: 05-31 18:28:12.881: INFO/DEBUG(49): afe14360 686768a5 f9b5e008 b120000c 46289201 05-31 18:28:12.881: INFO/DEBUG(49): afe14370 9a014790 35544306 37fff117 6824d5f3 05-31 18:28:12.881: INFO/DEBUG(49): afe14380 d1ed2c00 bdfe4630 00026ab0 000000b4 05-31 18:28:12.881: INFO/DEBUG(49): stack: 05-31 18:28:12.881: INFO/DEBUG(49): 46937c18 00000015 05-31 18:28:12.881: INFO/DEBUG(49): 46937c1c afe13359 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): 46937c20 afe3b02c /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c24 afe3afd8 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c28 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c2c afe14373 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c30 afe13329 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c34 afe13329 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c38 afe13380 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c3c ad081f50 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c40 400091e8 /dev/ashmem/mspace/dalvik-heap/zygote/0 (deleted) 05-31 18:28:12.891: INFO/DEBUG(49): 46937c44 009b3a6a 05-31 18:28:12.891: INFO/DEBUG(49): 46937c48 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c4c afe1338d /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c50 df002777 05-31 18:28:12.891: INFO/DEBUG(49): 46937c54 e3a070ad 05-31 18:28:12.891: INFO/DEBUG(49): #00 46937c58 ad06f573 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c5c ad044d81 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): #01 46937c60 000027bd 05-31 18:28:12.891: INFO/DEBUG(49): 46937c64 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c68 463b6ab4 /data/dalvik-cache/data@[email protected]@classes.dex 05-31 18:28:12.891: INFO/DEBUG(49): 46937c6c 463d1ecf /data/dalvik-cache/data@[email protected]@classes.dex 05-31 18:28:12.891: INFO/DEBUG(49): 46937c70 00140450 [heap] 05-31 18:28:12.891: INFO/DEBUG(49): 46937c74 ad041d2b /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c78 ad082f2c /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c7c ad06826c /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c80 00140450 [heap] 05-31 18:28:12.891: INFO/DEBUG(49): 46937c84 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c88 000002f8 05-31 18:28:12.891: INFO/DEBUG(49): 46937c8c 400091e8 /dev/ashmem/mspace/dalvik-heap/zygote/0 (deleted) 05-31 18:28:12.891: INFO/DEBUG(49): 46937c90 ad081f50 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c94 000002f8 05-31 18:28:12.891: INFO/DEBUG(49): 46937c98 00002710 05-31 18:28:12.891: INFO/DEBUG(49): 46937c9c ad0162e8 /system/lib/libdvm.so Thanks & Regards,

    Read the article

  • MVVM load data during or after ViewModel construction?

    - by mkmurray
    My generic question is as the title states, is it best to load data during ViewModel construction or afterward through some Loaded event handling? I'm guessing the answer is after construction via some Loaded event handling, but I'm wondering how that is most cleanly coordinated between ViewModel and View? Here's more details about my situation and the particular problem I'm trying to solve: I am using the MVVM Light framework as well as Unity for DI. I have some nested Views, each bound to a corresponding ViewModel. The ViewModels are bound to each View's root control DataContext via the ViewModelLocator idea that Laurent Bugnion has put into MVVM Light. This allows for finding ViewModels via a static resource and for controlling the lifetime of ViewModels via a Dependency Injection framework, in this case Unity. It also allows for Expression Blend to see everything in regard to ViewModels and how to bind them. So anyway, I've got a parent View that has a ComboBox databound to an ObservableCollection in its ViewModel. The ComboBox's SelectedItem is also bound (two-way) to a property on the ViewModel. When the selection of the ComboBox changes, this is to trigger updates in other views and subviews. Currently I am accomplishing this via the Messaging system that is found in MVVM Light. This is all working great and as expected when you choose different items in the ComboBox. However, the ViewModel is getting its data during construction time via a series of initializing method calls. This seems to only be a problem if I want to control what the initial SelectedItem of the ComboBox is. Using MVVM Light's messaging system, I currently have it set up where the setter of the ViewModel's SelectedItem property is the one broadcasting the update and the other interested ViewModels register for the message in their constructors. It appears I am currently trying to set the SelectedItem via the ViewModel at construction time, which hasn't allowed sub-ViewModels to be constructed and register yet. What would be the cleanest way to coordinate the data load and initial setting of SelectedItem within the ViewModel? I really want to stick with putting as little in the View's code-behind as is reasonable. I think I just need a way for the ViewModel to know when stuff has Loaded and that it can then continue to load the data and finalize the setup phase. Thanks in advance for your responses.

    Read the article

  • Voice Recognition Connection problem

    - by user244190
    I,m trying to work through and test a Voice Recognition example based on the VoiceRecognition.java example at http://developer.android.com/resources/samples/ApiDemos/src/com/example/android/apis/app/VoiceRecognition.html but when click on the button to create the activity, I get a dialog that says Connection problem. My Manifest file is using the Internet Permission, and I understand it passes the to the Google Servers. Do I need to do anything else to use this. Code below UPDATE: Ok, I was able to replace my emulator image with one from HTC that appears to come with Google Voice Search, however now when I run from the emulator, i'm getting an Audio Problem message with Speak Again or Cancel buttons. It appears to make it back to the onActivityResult(), but the resultCode is 0. Here is the LogCat output: 03-07 20:21:25.396: INFO/ActivityManager(578): Starting activity: Intent { action=android.speech.action.RECOGNIZE_SPEECH comp={com.google.android.voicesearch/com.google.android.voicesearch.RecognitionActivity} (has extras) } 03-07 20:21:25.406: WARN/ActivityManager(578): Activity is launching as a new task, so cancelling activity result. 03-07 20:21:25.968: WARN/ActivityManager(578): Activity pause timeout for HistoryRecord{434f7850 {com.ikonicsoft.mileagegenie/com.ikonicsoft.mileagegenie.MileageGenie}} 03-07 20:21:26.206: WARN/AudioHardwareInterface(554): getInputBufferSize bad sampling rate: 16000 03-07 20:21:26.256: ERROR/AudioRecord(819): Recording parameters are not supported: sampleRate 16000, channelCount 1, format 1 03-07 20:21:26.696: INFO/ActivityManager(578): Displayed activity com.google.android.voicesearch/.RecognitionActivity: 1295 ms 03-07 20:21:29.890: DEBUG/dalvikvm(806): threadid=3: still suspended after undo (s=1 d=1) 03-07 20:21:29.896: INFO/dalvikvm(806): Uncaught exception thrown by finalizer (will be discarded): 03-07 20:21:29.896: INFO/dalvikvm(806): Ljava/lang/IllegalStateException;: Finalizing cursor android.database.sqlite.SQLiteCursor@435d3c50 on ml_trackdata that has not been deactivated or closed 03-07 20:21:29.896: INFO/dalvikvm(806): at android.database.sqlite.SQLiteCursor.finalize(SQLiteCursor.java:596) 03-07 20:21:29.896: INFO/dalvikvm(806): at dalvik.system.NativeStart.run(Native Method) 03-07 20:21:31.468: DEBUG/dalvikvm(806): threadid=5: still suspended after undo (s=1 d=1) 03-07 20:21:32.436: WARN/IInputConnectionWrapper(806): showStatusIcon on inactive InputConnection I,m still not sure why I,m getting the Connect problem on the Droid. I can use Voice Search ok. I also tried clearing the cache, and data as described in some posts, butstill not working?? /** * Fire an intent to start the speech recognition activity. */ private void startVoiceRecognitionActivity() { Intent intent = new Intent(RecognizerIntent.ACTION_RECOGNIZE_SPEECH); intent.putExtra(RecognizerIntent.EXTRA_LANGUAGE_MODEL, RecognizerIntent.LANGUAGE_MODEL_FREE_FORM); intent.putExtra(RecognizerIntent.EXTRA_PROMPT, "Speech recognition demo"); startActivityForResult(intent, VOICE_RECOGNITION_REQUEST_CODE); } /** * Handle the results from the recognition activity. */ @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { if (requestCode == VOICE_RECOGNITION_REQUEST_CODE && resultCode == RESULT_OK) { // Fill the list view with the strings the recognizer thought it could have heard ArrayList<String> matches = data.getStringArrayListExtra( RecognizerIntent.EXTRA_RESULTS); mList.setAdapter(new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1, matches)); } super.onActivityResult(requestCode, resultCode, data); }

    Read the article

  • WIX Installing an EXE after Msi install finishes.

    - by Chris
    Hi, I have created an MSI package which when finishes runs an exe. <Package InstallerVersion="200" Compressed="yes" /> <Media Id="1" Cabinet="media1.cab" EmbedCab="yes" /> <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="ProgramFilesFolder"> <Directory Id="INSTALLLOCATION" Name="Installer Example"> <Component Id="VSTOR30.EXE" Guid="4fb0aee7-ec5b-4179-8938-a2be4df8ca0e"> <File Id="VSTOR30.EXE" Source="C:\Projects\InstallationTarget\ExampleInstaller\VSTOR30.EXE" KeyPath="yes" Checksum="yes" /> </Component> </Directory> </Directory> </Directory> <Feature Id="ProductFeature" Title="Installation Target" Level="1"> <ComponentRef Id="VSTOR30.EXE" /> </Feature> <InstallExecuteSequence> <Custom Action="RunEXE" After="InstallFinalize">NOT Installed</Custom> </InstallExecuteSequence> <CustomAction Id="RunEXE" FileKey="VSTOR30.EXE" ExeCommand="[#VSTOR30.EXE]" Execute="immediate" Return="asyncNoWait"> </CustomAction> <UI /> The MSI installs but the EXE is not run. I am calling it after Install Finalize and checking the install sequence in ORCA shows that it is being called at the correct time. I need deploy this through group policy software installation which uses a silent install without inputs. If i use a custom UI and run the EXE in the exit dialog <UI> <UIRef Id="WixUI_Minimal" /> <Publish Dialog="ExitDialog" Control="Finish" Event="DoAction" Value="LaunchApplication">WIXUI_EXITDIALOGOPTIONALCHECKBOX = 1 and NOT Installed</Publish> </UI> <Property Id="WIXUI_EXITDIALOGOPTIONALCHECKBOXTEXT" Value="RunEXE" /> <!-- Step 3: Include the custom action --> <Property Id="WixShellExecTarget" Value="[#VSTOR30.exe]" /> <CustomAction Id="RunEXE" BinaryKey="WixCA" DllEntry="WixShellExec" Impersonate="yes" /> Then i can install the software after the msi has finished running, however when putting this group policy the EXE doesn't install. Is there anything i am missing? Chris

    Read the article

  • Problem in finalizing the link list in C#

    - by Yasin
    My code was almost finished that a maddening bug came up! when i nullify the last node to finalize the link list , it actually dumps all the links and make the first node link Null ! when i trace it , its working totally fine creating the list in the loop but after the loop is done that happens and it destroys the rest of the link by doing so, and i don't understand why something so obvious is becoming problematic! (last line) struct poly { public int coef; public int pow; public poly* link;} ; poly* start ; poly* start2; poly* p; poly* second; poly* result; poly* ptr; poly* start3; poly* q; poly* q2; private void button1_Click(object sender, EventArgs e) { string holder = ""; IntPtr newP = Marshal.AllocHGlobal(sizeof(poly)); q = (poly*)newP.ToPointer(); start = q; int i = 0; while (this.textBox1.Text[i] != ',') { holder += this.textBox1.Text[i]; i++; } q->coef = int.Parse(holder); i++; holder = ""; while (this.textBox1.Text[i] != ';') { holder += this.textBox1.Text[i]; i++; } q->pow = int.Parse(holder); holder = ""; p = start; //creation of the first node finished! i++; for (; i < this.textBox1.Text.Length; i++) { newP = Marshal.AllocHGlobal(sizeof(poly)); poly* test = (poly*)newP.ToPointer(); while (this.textBox1.Text[i] != ',') { holder += this.textBox1.Text[i]; i++; } test->coef = int.Parse(holder); holder = ""; i++; while (this.textBox1.Text[i] != ';' && i < this.textBox1.Text.Length - 1) { holder += this.textBox1.Text[i]; if (i < this.textBox1.Text.Length - 1) i++; } test->pow = int.Parse(holder); holder = ""; p->link = test; //the addresses are correct and the list is complete } p->link = null; //only the first node exists now with a null link! }

    Read the article

  • Establishing a tcp connection from within a DLL

    - by Nicholas Hollander
    I'm trying to write a piece of code that will allow me to establish a TCP connection from within a DLL file. Here's my situation: I have a ruby application that needs to be able to send and receive data over a socket, but I can not access the native ruby socket methods because of the environment in which it will be running. I can however access a DLL file and run the functions within that, so I figured I would create a wrapper for winsock. Unfortunately, attempting to take a piece of code that should connect to a TCP socket in a normal C++ application throws a slew of LNK2019 errors that I can not for the life of me resolve. This is the method I'm using to connect: //Socket variable SOCKET s; //Establishes a connection to the server int server_connect(char* addr, int port) { //Start up Winsock WSADATA wsadata; int error = WSAStartup(0x0202, &wsadata); //Check if something happened if (error) return -1; //Verify Winock version if (wsadata.wVersion != 0x0202) { //Clean up and close WSACleanup(); return -2; } //Get the information needed to finalize a socket SOCKADDR_IN target; target.sin_family = AF_INET; //Address family internet target.sin_port = _WINSOCKAPI_::htons(port); //Port # target.sin_addr.s_addr = inet_addr(addr); //Create the socket s = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (s == INVALID_SOCKET) { return -3; } //Try connecting if (connect(s, (SOCKADDR *)&target, sizeof(target)) == SOCKET_ERROR) { //Failed to connect return -4; } else { //Success return 1; } } The exact errors that I'm receiving are: Error 1 error LNK2019: unresolved external symbol _closesocket@4 referenced in function _server_disconnect [Project Path] Error 2 error LNK2019: unresolved external symbol _connect@12 referenced in function _server_connect [Project Path] Error 3 error LNK2019: unresolved external symbol _htons@4 referenced in function _server_connect [Project Path] Error 4 error LNK2019: unresolved external symbol _inet_addr@4 referenced in function _server_connect [Project Path] Error 5 error LNK2019: unresolved external symbol _socket@12 referenced in function _server_connect [Project Path] Error 6 error LNK2019: unresolved external symbol _WSAStartup@8 referenced in function _server_connect [Project Path] Error 7 error LNK2019: unresolved external symbol _WSACleanup@0 referenced in function _server_connect [Project Path] Error 8 error LNK1120: 7 unresolved externals [Project Path] 1 1 Many thanks!

    Read the article

  • XCode sqlite3 - SELECT always return SQLITE_DONE

    - by user573633
    Hi developers.... a noob here asking for help after a day of head-banging.... I am working on an app with sqlite3 database with one database and two tables. I have now come to a step where I want to select from the table with an argument. The code is here: -(NSMutableArray*) getGroupsPeopleWhoseGroupName:(NSString*)gn;{ NSMutableArray *groupedPeopleArray = [[NSMutableArray alloc] init]; const char *sql = "SELECT * FROM Contacts WHERE groupName='?'"; @try { NSArray * paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory,NSUserDomainMask, YES); NSString *docsDir = [paths objectAtIndex:0]; NSString *theDBPath = [docsDir stringByAppendingPathComponent:@"ContactBook.sqlite"]; if (!(sqlite3_open([theDBPath UTF8String], &database) == SQLITE_OK)) { NSLog(@"An error opening database."); } sqlite3_stmt *st; NSLog(@"debug004 - sqlite3_stmt success."); if (sqlite3_prepare_v2(database, sql, -1, &st, NULL) != SQLITE_OK) { NSLog(@"Error, failed to prepare statement."); } //DB is ready for accessing, now start getting all the info. while (sqlite3_step(st) == SQLITE_ROW) { MyContacts * aContact = [[MyContacts alloc] init]; //get contactID from DB. aContact.contactID = sqlite3_column_int(st, 0); if (sqlite3_column_text(st, 1) != NULL) { aContact.firstName = [NSString stringWithUTF8String:(char *) sqlite3_column_text(st, 1)]; } else { aContact.firstName = @""; } // here retrieve other columns data .... //store these info retrieved into the newly created array. [groupedPeopleArray addObject:aContact]; [aContact release]; } if(sqlite3_finalize(st) != SQLITE_OK) { NSLog(@"Failed to finalize data statement."); } if (sqlite3_close(database) != SQLITE_OK) { NSLog(@"Failed to close database."); } } @catch (NSException *e) { NSLog(@"An exception occurred: %@", [e reason]); return nil; } return groupedPeopleArray;} MyContacts is the class where I put up all the record variables. My problem is sqlite3_step(st) always return SQLITE_DONE, so that it i can never get myContacts. (i verified this by checking the return value). What am I doing wrong here? Many thanks in advance!

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >