Search Results

Search found 103 results on 5 pages for 'folding'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • How do I do a mail merge that includes images? (Maybe in Word 2007)

    - by Ian Ringrose
    I am trying to find out the practicalities of doing a mail merge when each “record” to be merged on includes some images. I need to: print letters And envelopes Both the letters and the envelopes have: Fixed text Fixed images Text that come from the mail merge record Images that come from the mail merge record I don’t know if all images will be the same size for every record, so a bit of simple “on the fly” automatic formatting may be needed . I need to be able to repeat a single item if I get a problem (e.g when folding the letter). What problems am I likely to have? Is Word 2007 up to this sort of mail merging, or should I be looking at a report writing tool? How do I restart a print run after a printer jam etc? What format should I store the “records” and there images in? E.g Can standard software cope with images that are stored in separate files named after the “CustomerId” that is in the “record” (I can write custom software if needed, but would rather use standard “of-the-shelf” software for the printing, I am planning on custom software for the data creation, so can output in whatever format is needed)

    Read the article

  • Are two periods allowed in the local-part of an email address?

    - by Mike B
    A third-party email gateway relay is refusing to process a message for an email address we're sending to. The address is in the format of [email protected] (note the two periods). Is this allowed by RFC guidelines? RFC 2822 seems to object to this in section 3.4.1: The locally interpreted string is either a quoted-string or a dot-atom. If the string can be represented as a dot-atom (that is, it contains no characters other than atext characters or "." surrounded by atext characters), then the dot-atom form SHOULD be used and the quoted-string form SHOULD NOT be used. Comments and folding white space SHOULD NOT be used around the "@" in the addr-spec. Furthermore, in that same section, it references this: addr-spec = local-part "@" domain local-part = dot-atom / quoted-string / obs-local-part I interpret this to mean that the localpart can have content separated by dots but there cannot be two successive dots, and it cannot start or end with a dot. That being said, I'm not familiar with dot-atom syntax so maybe I'm mistaken here. Can someone please confirm and explain?

    Read the article

  • yui compressor maven plugin doesnt compress the js files

    - by hanumant
    I am using yui compressor to compress the js files in my web app. I have configured the plugin as indicated on yui maven plugin site yui compressor maven plugin. This is the pom plugin conf <plugin> <groupId>net.sf.alchim</groupId> <artifactId>yuicompressor-maven-plugin</artifactId> <version>0.7.1</version> <executions> <execution> <phase>compile</phase> <goals> <goal>jslint</goal> <goal>compress</goal> </goals> </execution> </executions> <configuration> <failOnWarning>true</failOnWarning> <nosuffix>true</nosuffix> <force>true</force> <aggregations> <aggregation> <!-- remove files after aggregation (default: false) --> <removeIncluded>false</removeIncluded> <!-- insert new line after each concatenation (default: false) --> <insertNewLine>false</insertNewLine> <output>${project.basedir}/${webcontent.dir}/js/compressedAll.js</output> <!-- files to include, path relative to output's directory or absolute path--> <!--inputDir>base directory for non absolute includes, default to parent dir of output</inputDir--> <includes> <include>**/autocomplete.js</include> <include>**/calendar.js</include> <include>**/dialogs.js</include> <include>**/download.js</include> <include>**/folding.js</include> <include>**/jquery-1.4.2.min.js</include> <include>**/jquery.bgiframe.min.js</include> <include>**/jquery.loadmask.js</include> <include>**/jquery.printelement-1.1.js</include> <include>**/jquery.tablesorter.mod.js</include> <include>**/jquery.tablesorter.pager.js</include> <include>**/jquery.dialogs.plugin.js</include> <include>**/jquery.ui.autocomplete.js</include> <include>**/jquery.validate.js</include> <include>**/jquery-ui-1.8.custom.min.js</include> <include>**/languageDropdown.js</include> <include>**/messages.js</include> <include>**/print.js</include> <include>**/tables.js</include> <include>**/tabs.js</include> <include>**/uwTooltip.js</include> </includes> <!-- files to exclude, path relative to output's directory--> </aggregation> </aggregations> </configuration> <dependencies> <dependency> <groupId>rhino</groupId> <artifactId>js</artifactId> <scope>compile</scope> <version>1.6R5</version> </dependency> <dependency> <groupId>org.apache.maven</groupId> <artifactId>maven-plugin-api</artifactId> <version>2.0.7</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.apache.maven</groupId> <artifactId>maven-project</artifactId> <version>2.0.7</version> <scope>provided</scope> </dependency><dependency> <groupId>net.sf.retrotranslator</groupId> <artifactId>retrotranslator-runtime</artifactId> <version>1.2.9</version> <scope>runtime</scope> </dependency> </dependencies> </plugin> And here is the log at compress time These will use the artifact files already in the core ClassRealm instead, to allow them to be included in PluginDescriptor.getArtifacts(). [DEBUG] Configuring mojo 'net.sf.alchim:yuicompressor-maven-plugin:0.7.1:jslint' [DEBUG] (f) failOnWarning = true [DEBUG] (f) jswarn = true [DEBUG] (f) outputDirectory = C:\test\target\classes [DEBUG] (f) project = MavenProject: com.test.test1:test2:19-SNAPSHOT @ C:\test\pom.xml [DEBUG] (f) resources = [Resource {targetPath: null, filtering: false, FileSet {directory: C:\test\src, PatternSet [includes: {}, excludes: {**/*.class, **/*.java, site/*}]}}] [DEBUG] (f) sourceDirectory = C:\test\src\..\js [DEBUG] (f) warSourceDirectory = C:\test\src\main\webapp [DEBUG] (f) webappDirectory = C:\test\target\test2-19-SNAPSHOT [DEBUG] -- end configuration -- [INFO] [yuicompressor:jslint {execution: default}] [INFO] nb warnings: 0, nb errors: 0 [DEBUG] Configuring mojo 'net.sf.alchim:yuicompressor-maven-plugin:0.7.1:compress' -- [DEBUG] (f) removeIncluded = false [DEBUG] (f) insertNewLine = false [DEBUG] (f) output = C:\test\WebContent\js\compressedAll.js [DEBUG] (f) includes = [**/autocomplete.js, **/calendar.js, **/dialogs.js, **/download.js, **/folding.js, **/jquery-1.4.2.min.js, **/jquery.bgifram e.min.js, **/jquery.loadmask.js, **/jquery.printelement-1.1.js, **/jquery.tablesorter.mod.js, **/jquery.tablesorter.pager.js, **/jquery.dialogs.p lugin.js, **/jquery.ui.autocomplete.js, **/jquery.validate.js, **/jquery-ui-1.8.custom.min.js, **/languageDropdown.js, **/messages.js, **/print.js, * */tables.js, **/tabs.js, **/uwTooltip.js] [DEBUG] (f) aggregations = [net.sf.alchim.mojo.yuicompressor.Aggregation@65646564] [DEBUG] (f) disableOptimizations = false [DEBUG] (f) encoding = Cp1252 [DEBUG] (f) failOnWarning = true [DEBUG] (f) force = true [DEBUG] (f) gzip = false [DEBUG] (f) jswarn = true [DEBUG] (f) linebreakpos = 0 [DEBUG] (f) nomunge = false [DEBUG] (f) nosuffix = true [DEBUG] (f) outputDirectory = C:\test\target\classes [DEBUG] (f) preserveAllSemiColons = false [DEBUG] (f) project = MavenProject: com.test.test1:test2:19-SNAPSHOT @ C:\test\pom.xml [DEBUG] (f) resources = [Resource {targetPath: null, filtering: false, FileSet {directory: C:\test\src, PatternSet [includes: {}, excludes: {**/*.class, **/*.java, site/*}]}}] [DEBUG] (f) sourceDirectory = C:\test\src\..\js [DEBUG] (f) statistics = true [DEBUG] (f) suffix = -min [DEBUG] (f) warSourceDirectory = C:\test\src\main\webapp [DEBUG] (f) webappDirectory = C:\test\target\test2-19-SNAPSHOT [DEBUG] -- end configuration -- [INFO] [yuicompressor:compress {execution: default}] [INFO] generate aggregation : C:\test\WebContent\js\compressedAll.js [INFO] compressedAll.js (407505b) [INFO] nb warnings: 0, nb errors: 0 [DEBUG] Configuring mojo 'org.apache.maven.plugins:maven-resources-plugin:2.2:testResources' -- [DEBUG] (f) filters = [] [DEBUG] (f) outputDirectory = C:\test\target\test-classes [DEBUG] (f) project = MavenProject: com.test.test1:test2:19-SNAPSHOT @ C:\test\pom.xml [DEBUG] (f) resources = [Resource {targetPath: null, filtering: false, FileSet {directory: C:\test\test , PatternSet [includes: {}, excludes: {**/*.class, **/*.java}]}}] [DEBUG] -- end configuration -- The problem is the files are getting aggregated into one file but without compressing. The link above uses version 1.1 and the plugin version I am using is 0.7.1. Is this going to make any diff. Can someone tell what is wrong here. PS: I have obfuscated some text in log to follow the compliance in my firm. So you may find it mismatching somewhere.

    Read the article

  • Would this be a good web application architecture?

    - by Gustav Bertram
    My problem Our MVC based framework does not allow us to cache only part of our output. Ideally we want to cahce static and semi-static bits, and run dynamic bits. In addition, we need to consider data caching that reacts to database changes. My idea The concept I came up with was to represent a page as a tree of XML fragment objects. (I say XML, but I mean XHTML). Some of the fragments are dynamic, and can pull their data directly from models or other sources, but most of the fragments are static scaffolding. If a subtree of fragments is completely static, then I imagine that they could unfold into pure XML that would then be cached as the text representation of their parent element. This process would ideally continue until we are left with a root element that contains all of the static XML, and has a couple of dynamic XML fragments that are resolved and attached to the relevant nodes of the XML tree just before the page is displayed. In addition to separating content into dynamic and static fragments, some fragments could be dynamic and cached. A simple expiry time which propagates up through the XML fragment tree would indicate that a specific fragment should periodically be refreshed. A newspaper section or front page does not need to be updated each second. Minutes or sometimes even longer is sufficient. Other fragments would be dynamic and uncached. Typically too many articles are viewed for them to be cached - the cache would overflow. Some individual articles may be cached if they are extremely popular. Functional notes The folding mechanism could be to be smart enough to judge when it would be more profitable to fold a dynamic cached fragment and propagate the expiry date to the parent fragment, or to keep it separate and simple attach to the XML tree when resolving the page. If some dynamic cached fragments are associated to database objects through mechanisms like a globally unique content id, then changes to the database could trigger changes to the output cache. If fragments store the identifiers of parent fragments, then they could trigger a refolding process that would then include the updated data. A set of pure XML with an ordered array of fragment objects (that each store the identifying information of the node to which they should be attached), can be resolved in a fairly simple way by walking the XML tree, and merging the data from the fragments. Because it is not necessary to parse and construct the entire tree in memory before attaching nodes, processing should be fairly fast. The identifiers of each fragment would be a combination of relevant identity data and the type of fragment object. Cached parent fragments would contain references to these identifiers, in order to then either pull them from the fragment cache, or to run their code. The controller's responsibility is reduced to making changes to the database, and telling the root XML fragment object to render itself. The Question My question has two parts: Is this a good design? Are there any obvious flaws I'm missing? Has somebody else thought of this before? References? Is there an existing alternative that I should consider? A cool templating engine maybe?

    Read the article

  • Why can't I source my vimrc after installing vundle?

    - by John N
    I'm trying to get my Vim to update on the fly after editing vimrc. So I followed the instructions at Vimcast which basically source vimrc every time you hit save. But that doesn't work for some reason (when I save my vimrc it doesn't give any errors), so I decided to run source $HOME/.vimrc manually and here's what I got: -bash: Configuration file for vim set nocompatible : command not found -bash: Plugin Management { filetype off : command not found -bash: .vimrc: line 7: syntax error near unexpected token `(' -bash: .vimrc: line 7: ` call vundle#rc()' And here's my Vim info (I'm running Mac OS X 10.7.3): VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Jul 31 2011 19:27:29) Compiled by [email protected] Normal version without GUI. Features included (+) or not (-): -arabic +autocmd -balloon_eval -browse +builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments -conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic -emacs_tags +eval +ex_extra +extra_search -farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist -keymap -langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape -mouse_dec -mouse_gpm -mouse_jsbterm -mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg -osfiletype +path_extra -perl +persistent_undo +postscript +printer -profile -python -python3 +quickfix +reltime -rightleft -ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -D_FORTIFY_SOURCE=0 -Iproto -DHAVE_CONFIG_H -arch i386 -arch x86_64 -g -Os -pipe Linking: gcc -arch i386 -arch x86_64 -o vim -lncurses Could anybody tell me what's wrong here? Thanks so much!

    Read the article

  • How to I display results of phpcs in VIM?

    - by Matt
    I am presently trying to use PHP Codesniffer (PEAR) in vim for PHP Files. I have found 2 sites that give code to add into the $HOME/.vim/plugin/phpcs.vim file. I have added the code and I "think" it is working, but I cannot see the results, I only see one line at the very bottom of vim that says (1 of 32) but I cannot see any of the 32 errors. Here is my .vimrc file " Backup Options -> Some People may not want this... it generates extra files set backup " Enable Backups set backupext=.bak " Add .bak extention to modified files set patchmode=.orig " Copy original file to with .orig extention Before saving. " Set Tabs and spacing for PHP as recomended by PEAR and Zend set expandtab set shiftwidth=4 set softtabstop=4 set tabstop=4 " Set Auto-indent options set cindent set smartindent set autoindent " Show lines that exceed 80 characters match ErrorMsg '\%80v.\+' " Set Colors set background=dark " Show a status bar set ruler set laststatus=2 " Set Search options highlight, and wrap search set hls is set wrapscan " File Type detection filetype on filetype plugin on " Enable Spell Checking set spell " Enable Code Folding set foldenable set foldmethod=syntax " PHP Specific options let php_sql_query=1 " Highlight sql in php strings let php_htmlInStrings=1 " Highlight HTML in php strings let php_noShortTags=1 " Disable PHP Short Tags let php_folding=1 " Enable Ability to FOLD html Code I have tried 2 different versions of phpcs.vim, and I get the same results for both: Version 1 (found at: VIM an a PHP IDE) function! RunPhpcs() let l:filename=@% let l:phpcs_output=system('phpcs --report=csv --standard=YMC '.l:filename) " echo l:phpcs_output let l:phpcs_list=split(l:phpcs_output, "\n") unlet l:phpcs_list[0] cexpr l:phpcs_list cwindow endfunction set errorformat+=\"%f\"\\,%l\\,%c\\,%t%*[a-zA-Z]\\,\"%m\" command! Phpcs execute RunPhpcs() Version 2: (found at Integrated PHP Codesniffer in VIM ) function! RunPhpcs() let l:filename=@% let l:phpcs_output=system('phpcs --report=csv --standard=YMC '.l:filename) let l:phpcs_list=split(l:phpcs_output, "\n") unlet l:phpcs_list[0] cexpr l:phpcs_list cwindow endfunction set errorformat+="%f"\\,%l\\,%c\\,%t%*[a-zA-Z]\\,"%m" command! Phpcs execute RunPhpcs() Both of these produce identical results. phpcs is installed on my system, and I am able to generate results outside of vim. Any help would be appreciated I am just learning more about vim...

    Read the article

  • Raw types and subtyping

    - by Dmitrii
    We have generic class SomeClass<T>{ } We can write the line: SomeClass s= new SomeClass<String>(); It's ok, because raw type is supertype for generic type. But SomeClass<String> s= new SomeClass(); is correct to. Why is it correct? I thought that type erasure was before type checking, but it's wrong. From Hacker's Guide to Javac When the Java compiler is invoked with default compile policy it performs the following passes: parse: Reads a set of *.java source files and maps the resulting token sequence into AST-Nodes. enter: Enters symbols for the definitions into the symbol table. process annotations: If Requested, processes annotations found in the specified compilation units. attribute: Attributes the Syntax trees. This step includes name resolution, type checking and constant folding. flow: Performs data ow analysis on the trees from the previous step. This includes checks for assignments and reachability. desugar: Rewrites the AST and translates away some syntactic sugar. generate: Generates Source Files or Class Files. Generic is syntax sugar, hence type erasure invoked at 6 pass, after type checking, which invoked at 4 pass. I'm confused.

    Read the article

  • iPhone: How to Determine Average Light/Dark of an Area of an UIImage

    - by TechZen
    I need to place labels with a transparent background over a variable-content UIImage. Readability will vary significantly depending on the relationship between the color of the label's text and the color/luminosity of the area of the image displayed under the label. Since the image will be constantly changing, the color of the label's text needs to change in sync. I have found several techniques for determining the color, perceived luminosity etc of a single pixel. However, I need to rather quickly (while a view loads) determine the rough perceived color/luminosity of an area of the UIImage under the frame of the UILabel. I presume I will also need to measure the alpha because the same color/luminosity looks different at different alpha values. Is there a way to calculate such a value for an area? Will I be reduced to simply summing pixels? If it comes to that, is there an algorithm to accomplish this? I've thought of two possible approaches: Perform some "folding" operations i.e. combining pixels from one half of the area to the other half. Then repeat until I get a single value. Would this be practical? How would you logically combine pixels to average their perceived color/luminosity? Sample a statistically significant number of pixels in the area and then combine them (somehow) to get a rough measure. I think this problem comes up a lot these days with people being so found of customizing backgrounds. Seems like something that would be worth my time to bang out a category or class to handle this and then share it around.

    Read the article

  • How to change key mappings in Cygwin's Vim

    - by Boldewyn
    I'm using Vim under Debian, Win Vista and WinXP (the latter two with Cygwin). To handle tabs more easily, I mapped <C-Left> and <C-Right> to :tab(prev|next). This mapping works like a charm on the Debian machine. On the Windows machines, however, pressing <C-Left> deletes 5 lines, as far as I can tell, and meddles with cursor position, while <C-Right> does this, too, and additionally enters Insert mode. Question: To put it in a nutshell, how can I find out, why Vim behaves as it does? Is there a way to backtrace the active commands and keystrokes? Could there be a plugin the culprit? (I didn't install one, perhaps a default include by the Cygwin distro...) If so, how can I find it? Edit 1: OK, it seems, that I got a first trace: The terminal sends for <C-Left> '^[[1;5D', and for right '^[[1;5C' (evaluated with the <C-V><C-Left> trick). If vim interprets this literally and discards the first characters, it explains the strange behaviour. Any ideas, how I could change this key mapping? Additional Diagnosis: This behaviour occurs regardless of any existing ~/.vimrc file (is therefore not related to my above mentioned mapings) and is not inherited of some /etc/vim/vimrc, since this doesn't exist in the default Cygwin installation. :verbose map doesn't yield any new insights. Either nothing or my mentioned mappings appear, based on the existence of the .vimrc file :help <C-Left> suggests, that the default would be a simple cursor movement, which is apparently not the case. Vim's version under Cygwin: VIM - Vi IMproved 7.2 (2008 Aug 9, compiled Feb 11 2010 17:36:58) Included patches: 1-264 Compiled by http://cygwin.com/ Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +cryptv +cscope +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +postscript +printer +profile -python +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -g -O2 -D_FORTIFY_SOURCE=1 Linking: gcc -L/usr/local/lib -o vim.exe -lm -lncurses -liconv

    Read the article

  • How to find out Vim's currently mapped commandos

    - by Boldewyn
    I'm using Vim under Debian, Win Vista and WinXP (the latter two with Cygwin). To handle tabs more easily, I mapped <C-Left> and <C-Right> to :tab(prev|next). This mapping works like a charm on the Debian machine. On the Windows machines, however, pressing <C-Left> deletes 5 lines, as far as I can tell, and meddles with cursor position, while <C-Right> does this, too, and additionally enters Insert mode. Question: To put it in a nutshell, how can I find out, why Vim behaves as it does? Is there a way to backtrace the active commands and keystrokes? Could there be a plugin the culprit? (I didn't install one, perhaps a default include by the Cygwin distro...) If so, how can I find it? Additional Diagnosis: This behaviour occurs regardless of any existing ~/.vimrc file (is therefore not related to my above mentioned mapings) and is not inherited of some /etc/vim/vimrc, since this doesn't exist in the default Cygwin installation. :verbose map doesn't yield any new insights. Either nothing or my mentioned mappings appear, based on the existence of the .vimrc file :help <C-Left> suggests, that the default would be a simple cursor movement, which is apparently not the case. Vim's version under Cygwin: VIM - Vi IMproved 7.2 (2008 Aug 9, compiled Feb 11 2010 17:36:58) Included patches: 1-264 Compiled by http://cygwin.com/ Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +cryptv +cscope +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +postscript +printer +profile -python +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -g -O2 -D_FORTIFY_SOURCE=1 Linking: gcc -L/usr/local/lib -o vim.exe -lm -lncurses -liconv

    Read the article

  • Vim configuration slow in Terminal & iTerm2 but not in MacVim

    - by Jey Balachandran
    Ideally, I want to use Vim from Terminal or iTerm2. However, it becomes unbearably slow so I had to resort to using MacVim. There is nothing wrong with MacVim, however my workflow would be much smoother if I used only Terminal/iTerm2. When its slow Loading files, in particular Rails files takes about 1 - 1.5s. Removing rails.vim decreases this time to 0.5 - 1s. In MacVim this is instantaneous. Scrolling through the rows and columns via h, j, k, l. It progressively gets slower the longer I hold down the keys. Eventually, it starts jumping rows. I have my Key Repeat set to Fast and Delay Until Repeat set to Short. After 10 - 15 minutes of usage, using plugins such as ctrlp or Command-T gets very laggy. I'd type a letter, wait 2 - 3s, then type the next. My Setup 11" MacBook Air running Mac OS X Version 10.7.3 (1.6 Ghz Intel Core 2 Duo, 4 GB DDR3) My dotfiles. > vim --version VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Nov 16 2011 16:44:23) MacOS X (unix) version Included patches: 1-333 Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv -cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg +path_extra -perl +persistent_undo +postscript +printer +profile +python -python3 +quickfix +reltime +rightleft +ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/local/Cellar/vim/7.3.333/share/vim" Compilation: /usr/bin/llvm-gcc -c -I. -Iproto -DHAVE_CONFIG_H -DMACOS_X_UNIX -no-cpp-precomp -O3 -march=core2 -msse4.1 -w -pipe -D_FORTIFY_SOURCE=1 Linking: /usr/bin/llvm-gcc -L. -L/usr/local/lib -o vim -lm -lncurses -liconv -framework Cocoa -framework Python -lruby I've tried running without any plugins or syntax highlighting. It opens files a lot faster but still not as fast as MacVim. But the other two problems still exist. Why is my vim configuration slow? How can I improve the speed of my vim configuration within Terminal or iTerm2?

    Read the article

  • Vim digraphs is not working

    - by Hauleth
    I've tried to input digraphs in Vim (without vi compatibility), and unfortunately I can't. After using ControlKP * it should input big greek pi letter. I've also tried using PBS * with :set digraph, but no success either. My gvim --version output: VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 23 2012 18:42:18) Included patches: 1-712 Compiled by ArchLinux Big version with GTK2 GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs +dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() +gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +lua +menu +mksession +modify_fname +mouse +mouseshape +mouse_dec +mouse_gpm -mouse_jsbterm +mouse_netterm +mouse_sgr -mouse_sysmouse +mouse_urxvt +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg +path_extra +perl +persistent_undo +postscript +printer -profile +python -python3 +quickfix +reltime +rightleft +ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup +X11 -xfontset +xim +xsmp_interact +xterm_clipboard -xterm_save system vimrc file: "/etc/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" system gvimrc file: "/etc/gvimrc" user gvimrc file: "$HOME/.gvimrc" system menu file: "$VIMRUNTIME/menu.vim" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/local/include -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 Linking: gcc -L. -Wl,-O1,--sort-common,--as-needed,-z,relro -rdynamic -Wl,-export-dynamic -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro -L/usr/local/lib -Wl,--as-needed -o vim -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lSM -lICE -lXt -lX11 -lXdmcp -lSM -lICE -lm -lncurses -lnsl -lacl -lattr -lgpm -ldl -L/usr/lib -llua -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro -fstack-protector -L/usr/local/lib -L/usr/lib/perl5/core_perl/CORE -lperl -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc -L/usr/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm -Xlinker -export-dynamic -lruby -lpthread -lrt -ldl -lcrypt -lm -L/usr/lib Can you tell me how to get my ControlK digraphs work? EDIT: Output of :verbose set enc? fenc? is: encoding=utf-8 Last set from ~/.vimrc fileencoding=

    Read the article

  • Developer’s Life – Summary of Superhero Articles

    - by Pinal Dave
    Earlier this year, I wrote an article series where I talked about developer’s life and compared it with Superhero. I have got amazing response to this series and I have been receiving quite a lots of email suggesting that I should write more blog post about them. Currently I am not planning to write more blog post but I will soon continue another series. In this blog post, I have summarized the entire series. Let me know if you want me to write about any superhero. I will see what I can do about that hero. Developer’s Life – Every Developer is a Captain America Captain America was first created as a comic book character in the 1940’s as a way to boost morale during World War II.  Aimed at a children’s audience, his legacy faded away when the war ended.  However, he has recently has a major reboot to become a popular movie character that deals with modern issues. Developer’s Life – Every Developer is the Incredible Hulk The Incredible Hulk is possibly one of the scariest superheroes out there.  All superheroes are meant to be “out of this world” and awe-inspiring, but I think most people will agree with I say The Hulk takes this to the next level.  He is the result of an industrial accident, which is scary enough in it’s own right.  Plus, when mild-mannered Bruce Banner is angered, he goes completely out-of-control and transforms into a destructive monster that he cannot control and has no memories of. Developer’s Life – Every Developer is a Wonder Woman We have focused a lot lately on this “superhero series.”  I love fantasy books and movies, and I feel like there is a lot to be learned from them.  As I am writing this series, though, I have noticed that every super hero I write about is a man.  So today, I would like to talk about the major female super hero – Wonder Woman. Developer’s Life – Every Developer is a Harry Potter Harry Potter might not be a superhero in the traditional sense, but I believe he still has a lot to teach us and show us about life as a developer.  If you have been living under a rock for the last 17 years, you might not know that Harry Potter is the main character in an extremely popular series of books and movies documenting the education and tribulation of a young wizard (and his friends). Developer’s Life – Every Developer is Like Transformers Transformers may not be superheroes – they don’t wear capes, they don’t have amazing powers outside of their size and folding ability, they’re not even human (technically).  Part of their enduring popularity is that while we are enjoying over-the-top movies, we are learning about good leadership and strong personal skills. Developer’s Life – Every Developer is a Iron Man Iron Man is another superhero who is not naturally “super,” but relies on his brain (and money) to turn him into a fighting machine.  While traditional superheroes are still popular, a three-movie franchise and incorporation into the new Avengers series shows that Iron Man is popular enough on his own. Developer’s Life – Every Developer is a Sherlock Holmes I have been thinking a lot about how developers are like super heroes, and I have written two blog posts now comparing them to Spiderman and Superman.  I have a lot of love and respect for developers, and I hope that they are enjoying these articles, and others are learning a little bit about the profession.  There is another fictional character who, while not technically asuper hero, is very powerful, and I also think stands as a good example of a developer. That character is Sherlock Holmes.  Sherlock Holmes is a British detective, first made popular at the turn of the 19thcentury by author Sir Arthur Conan Doyle.  The original Sherlock Holmes was a brilliant detective who could solve the most mind-boggling crime through simple observations and deduction. Developer’s Life – Every Developer is a Chhota Bheem Chhota Bheem is a cartoon character that is extremely popular where I live.  He is my daughter’s favorite characters.  I like to say that children love Chhota Bheem more than their parents – it is lucky for us he is not real!  Children love Chhota Bheem because he is the absolute “good guy.”  He is smart, loyal, and strong.  He and his friends live in Dholakpur and fight off their many enemies – and always win – in every episode.  In each episode, they learn something about friendship, bravery, and being kind to others.  Chhota Bheem is a good role model for children, and I think that he is a good role model for developers are well. Developer’s Life – Every Developer is a Batman Batman is one of the darkest superheroes in the fantasy canon.  He does not come to his powers through any sort of magical coincidence or radioactive insect, but through a lot of psychological scarring caused by witnessing the death of his parents.  Despite his dark back story, he possesses a lot of admirable abilities that I feel bear comparison to developers. Developer’s Life – Every Developer is a Superman I enjoyed comparing developers to Spiderman so much, that I have decided to continue the trend and encourage some of my favorite people (developers) with another favorite superhero – Superman.  Superman is probably the most famous superhero – and one of the most inspiring. Developer’s Life – Every Developer is a Spiderman I have to admit, Spiderman is my favorite superhero.  The most recent movie recently was released in theaters, so it has been at the front of my mind for some time. Spiderman was my favorite superhero even before the latest movie came out, but of course I took my whole family to see the movie as soon as I could!  Every one of us loved it, including my daughter.  We all left the movie thinking how great it would be to be Spiderman.  So, with that in mind, I started thinking about how we are like Spiderman in our everyday lives, especially developers. I would like to know which Superhero is your favorite hero! Reference: Pinal Dave (http://blog.SQLAuthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Developer, Superhero

    Read the article

  • Jquery Slidetoggle open 1 div and close another

    - by Stephen
    I'm trying to close one div when clicking on another div . Currently, it opens multiple divs at one time. JQUERY: $(document).ready(function() { $(".dropdown dt a").click(function() { var dropID = $(this).closest("dl").attr("id"); $("#"+dropID+" dd ul").slideToggle(200); return false; }); $(".dropdown dd ul li a").click(function() { var dropID = $(this).closest("dl").attr("id"); var text = $(this).html(); var selVal = $(this).find(".dropdown_value").html(); $("#"+dropID+" dt a").html(text); $("#"+dropID+" dd ul").hide(); return false; }); $("dl[class!=dropdown]").click(function() { $(".dropdown dd ul").hide(); return false; }); $("id!=quotetoolContainer").click(function() { $(".dropdown dd ul").hide(); return false; }); $('body').click(function() { $(".dropdown dd ul").hide(); return false; }); $('.productSelection').children().hover(function() { $(this).siblings().stop().fadeTo(200,0.5); }, function() { $(this).siblings().stop().fadeTo(200,1); }); }); HTML: <div id="quotetoolContainer"> <div class="top"></div> <div id="quotetool"> <h2>Instant Price Calculator</h2> <p>Document Type</p> <dl id="docType" class="dropdown"> <dt><a href="#"><span>Select a Document Type</span></a></dt> <dd> <ul> <li><a href="#" id="1">Datasheets<span class="value">Datasheets</span></a></li> <li><a href="#">Manuals<span class="value">Manuals</span></a></li> <li><a href="#">Brochures<span class="value">Brochures</span></a></li> <li><a href="#">Newsletters<span class="value">Newsletters</span></a></li> <li><a href="#">Booklets<span class="value">Booklets</span></a></li> </ul> </dd> </dl> <p>Flat Size</p> <dl id="flatSize" class="dropdown"> <dt><a href="#">8.5" x 11"<span class="value">8.5" x 11"</span></a></dt> <dd> <ul> <li><a href="#">8.5" x 11"<span class="value">8.5" x 11"</span></a></li> <li><a href="#">11" x 17"<span class="value">11" x 17"</span></a></li> </ul> </dd> </dl> <p>Full Color or Black &amp; White?</p> <dl id="color" class="dropdown"> <dt><a href="#">Full Color<span class="value">Full Color</span></a></dt> <dd> <ul> <li><a href="#">Full Color<span class="value">Full Color</span></a></li> <li><a href="#">Black &amp; White<span class="value">Black &amp; White</span></a></li> </ul> </dd> </dl> <p>Paper</p> <dl id="paper" class="dropdown"> <dt><a href="#">Value White Paper (20 lb.)<span class="value">Value White Paper (20 lb.)</span></a></dt> <dd> <ul> <li><a href="#">Value White Paper (20 lb.)<span class="value">Value White Paper (20 lb.)</span></a></li> <li><a href="#">Premium White Paper (28 lb.)<span class="value">Premium White Paper (28 lb.)</span></a></li> <li><a href="#">Glossy White Text (80 lb.) - Recycled<span class="value">Glossy White Text (80 lb.) - Recycled</span></a></li> <li><a href="#">Glossy White Cover (80 lb.) - Recycled<span class="value">Glossy White Cover (80 lb.) - Recycled</span></a></li> </ul> </dd> </dl> <p>Folding</p> <dl id="folding" class="dropdown"> <dt><a href="#">Fold in Half<span class="value">Fold in Half</span></a></dt> <dd> <ul> <li><a href="#">Fold in Half<span class="value">Fold in Half</span></a></li> <li><a href="#">Tri-Fold<span class="value">Tri-Fold</span></a></li> <li><a href="#">Z-Fold<span class="value">Z-Fold</span></a></li> <li><a href="#">Double-Parallel Fold<span class="value">Double-Parallel Fold</span></a></li> </ul> </dd> </dl> <p>Three-Hole Drill</p> <dl id="drill" class="dropdown"> <dt><a href="#">No<span class="value">No</span></a></dt> <dd> <ul> <li><a href="#">No<span class="value">No</span></a></li> <li><a href="#">Yes<span class="value">Yes</span></a></li> </ul> </dd> </dl> <p>Qty</p> <dl id="quantity" class="dropdown"> <dt><a href="#">50<span class="value">50</span></a></dt> <dd> <ul> <li><a href="#">50<span class="value">50</span></a></li> <li><a href="#">100<span class="value">100</span></a></li> <li><a href="#">150<span class="value">150</span></a></li> <li><a href="#">200<span class="value">200</span></a></li> <li><a href="#">250<span class="value">250</span></a></li> <li><a href="#">500<span class="value">500</span></a></li> <li><a href="#">750<span class="value">750</span></a></li> <li><a href="#">1,000<span class="value">1,000</span></a></li> <li><a href="#">1,500<span class="value">1,500</span></a></li> <li><a href="#">2,000<span class="value">2,000</span></a></li> <li><a href="#">2,500<span class="value">2,500</span></a></li> <li><a href="#">3,000<span class="value">3,000</span></a></li> <li><a href="#">3,500<span class="value">3,500</span></a></li> <li><a href="#">4,000<span class="value">4,000</span></a></li> <li><a href="#">4,500<span class="value">4,500</span></a></li> <li><a href="#">5,000<span class="value">5,000</span></a></li> <li><a href="#">5,500<span class="value">5,500</span></a></li> <li><a href="#">6,000<span class="value">6,000</span></a></li> <li><a href="#">6,500<span class="value">6,500</span></a></li> <li><a href="#">7,000<span class="value">7,000</span></a></li> <li><a href="#">7,500<span class="value">7,500</span></a></li> <li><a href="#">8,000<span class="value">8,000</span></a></li> <li><a href="#">8,500<span class="value">8,500</span></a></li> <li><a href="#">9,000<span class="value">9,000</span></a></li> <li><a href="#">9,500<span class="value">9,500</span></a></li> <li><a href="#">10,000<span class="value">10,000</span></a></li> <li><a href="#">12,500<span class="value">12,500</span></a></li> <li><a href="#">15,000<span class="value">15,000</span></a></li> <li><a href="#">17,500<span class="value">17,500</span></a></li> <li><a href="#">20,000<span class="value">20,000</span></a></li> </ul> </dd> </dl> <div id="priceTotal"> <div class="priceText">Your Price:</div> <div class="price">$29.00</div> <div class="clear"></div> </div> <div id="buttonQuoteStart"><a href="#" title="Start Printing">Start Printing</a></div> </div> <div class="bottom"></div> </div>

    Read the article

  • What IDE to use for Python

    - by husayt
    As a Python newbie, it is interesting to know what IDE's ("GUIs/editors") others use for Python coding. If you can just give the name (e.g. Textpad, Eclipse ..) that will be enough. If it is already mentioned, you can just vote for it. But if you can also give some more comparative information, that will be much appreciated. Thanks. Update: Results so far PyDev with Eclipse (CP, F, AC, PD, EM, SI, MLS, UML, SC, UT, LN, CF, BM) Komodo (CP, C/F, MLS, PD, AC, SC, SI, BM, LN, CF, CT) Emacs (CP, F, AC, MLS, PD, EM, SC, SI, BM, LN, CF, CT, UT, UML) Vim (CP, F, AC, MLS, SI, BM, LN, CF ) TextMate (Mac, CT, CF, MLS, SI, BM, LN) Gedit (Linux, F, AC, MLS, BM, LN, CT [sort of]) Idle (CP, F, AC) PIDA (Linux, CP, F, AC, MLS, SI, BM, LN, CF)(VIM Based) NotePad++ (Windows) BlueFish (Linux) JEdit (CP, F, BM, LN, CF, MLS) E-Texteditor (TextMate Clone for Windows) WingIde (CP, C, AC, MLS (support for C), PD, EM, SC, SI, BM, LN, CF, CT, UT) Eric Ide (CP, F, AC, PD, EM, SI, LN, CF, UT) Pyscripter (Windows, F, AC, PD, EM, SI, LN, CT, UT) ConTEXT (Windows, C) SPE (F, AC, UML) SciTE (CP, F, MLS, EM, BM, LN, CF, CT, SH) Zeus (W, C, BM, LN, CF, SI, SC, CT) NetBeans (CP, F, PD, UML, AC, MLS, SC, SI, BM, LN, CF, CT, UT, RAD) DABO (CP) BlackAdder (C, CP, CF, SI) PythonWin (W, F, AC, PD, SI, BM, CF) Geany (CP, F, very limited AC, MLS, SI, BM, LN, CF) UliPad (CP, F, AC, PD, MLS, SI, LI, CT, UT, BM) Boa Constructor (CP, F, AC, PD, EM, SI, BM, LN, UML, CF, CT) ScriptDev (W, C, AC, MLS, PD, EM, SI, BM, LN, CF, CT) Spider (CP, F, AC) Editra (CP, F, AC, MLS, SC, SI, BM, LN, CF) Pfaide (Windows, C, AC, MLS, SI, BM, LN, CF, CT) KDevelop (CP, F, MLS, SC, SI, BM, LN, CF) Acronyms used: CP - Cross Platfom C - Commercial F - Free AC - Automatic Code-completion MLS - Multi-Language Support PD - Integrated Python Debugging EM - ErrorMarkup SC - Source Control integration SI - Smart Indent BM - Bracket Matching LN - Line Numbering UML - UML editing / viewing CF - Code Folding CT - Code Templates UT - Unit Testing UID - Gui Designer (e.g. QT, Eric, ..) DB - integrated database support RAD - Rapid app development support I don't mention basics like Syntax highlighting as I expect these by default. This is a just dry list reflecting your feedback and comments, I am not advocating any of these tools. I will keep updating this list as you keep posting your answers. PS. Can you help me to add features of the above editors to the list (like autocomplete, debugging, or etc)?

    Read the article

  • WPF Datagrid zoom issue

    - by David Osborn
    I'm working with the WPF DataGrid from the WPFToolkit and I'm having issues with trying to zoom the entire datagrid. My initial thought was that it was going to be really easy and I would just apply a scale transform to the grid and animate the ScaleX, ScaleY properties when the used clicked a button. This did not work however because the scrollbar was zoomed in making it larger. I need fixed headers and fixed columns on the datagrid so I can't simple use a scrollviewer outside of the datagrid to handle the scrolling. The second thing I tried was to just scale the font size in the grid, but this failed because on shrinking the font size the columns stay at the original width and do not shrink. Finally I thought I had it working by using the below code which goes into the view tree for the datagrid and adds a scale transform to the Scroll Content Presenter. (Also not shown in this code, I apply a transform to the visual tree item for the headers in the same manner so that it scales as well). I thought this was working great until I tested out the horizontal scrolling after zooming. (Vertical scrolling works perfectly.) Before zooming at all the horizontal scrolling is fine, but after zooming, when I scroll horzonitally the display freaks out. It is hard to tell exactly what it is doing, but it sort of looks like the content that is scrolling off the left of the screen is "folding over" and coming back in on the left. Maybe it is just all smashing up on the left side. Does anyone have any ideas how I can get this working, hopefully without throwing out my whole datagrid that is already working quite well otherwise. ScrollContentPresenter sp = (ScrollContentPresenter) VisualTreeHelper.GetChild( VisualTreeHelper.GetChild( VisualTreeHelper.GetChild(VisualTreeHelper.GetChild(dgMatrix, 0), 0), 0),2); ScaleTransform st = new ScaleTransform(1, 1); sp.LayoutTransform = st; DoubleAnimation a = new DoubleAnimation(); a.By = 1.5; a.AutoReverse = false; a.Duration = new Duration(TimeSpan.Parse("0:0:0.25")); st.BeginAnimation(ScaleTransform.ScaleXProperty, a); st.BeginAnimation(ScaleTransform.ScaleYProperty, a);

    Read the article

  • How hard programming is? Really. [closed]

    - by Bubba88
    Hi! The question is about your perception of programming activity. How hard/exacting this task is? There is much buzz about programming nowadays, people say that programmers are smart, very technical and abstract at a time, know much about world, psychology etc.. They say, that programmers got really powerful brain thing, cause there is much to keep in consideration simultaneously again with much information folded into each other associatively (up 10 levels of folding they say))) Still, there are some terms to specify at our own.. So that is the question: What do you think about programming in general? Is it hard? Is it 'for everyone' or for the particular kind of people only? How much non-CS background do you need to program (just to program, really; enterprise applications for example)? How long is the learning curve? (again, for programming in general) And another bunch of random questions: - If you were not to like/love programming, would that be a serious trouble bothering your current employment? - If you were to start from the beginning, would you chose that direction this time? - What other areas (jobs or maybe hobbies) are comparable to programming in the way they can explode someone's lovely brain? - Is 'non turing-complete programming' (SQL, XML, etc.) comparable to what we do or is it really way easier, less requiring, cheap and akin to cooking :)? Well, the essence is: How would you describe programming activity WRT to its difficulty? Or, on the other hand: Did you ever catch yourself thinking at some point: OMG, it's sooo hard! I don't know how would I ever program, even carried away this way and doing programming just for fun? It's very interesting to know your opinion, your'e the programmers after all. I mean much people must be exaggerating/speculating about the thing they do not really know about. But that musn't be the case here on SO :) P.S.: I'll try my best to update this post later, and you please edit it too. At least I'll get decent English in my question text :)

    Read the article

  • Monitor randomly shutting down, computer accepting no input, need to restart to get working

    - by Sebastian Lamerichs
    First off, spec list: OS: Windows 7 Ultimate 64-bit SP1 CPU: i7-4820k @ 3.7GHz (stock) GPU: Two 3GB Radeon HD 7970s @ 1.05GHz Mobo: AsRock X79 Extreme6 HDD: 2TB Seagate Barracuda 7200rpm RAM: 16GB quad-channel Kingston 1600MHz PSU: Antec HCG 900W Monitors: Acer S220HQL 1920x1080 + ViewSonic VA2251 1920x1080. Plugged into different GPUs. My problem is that, on a daily-ish basis, my monitors will turn off and not turn back on. My computer will still be running, GPU/CPU/case fans all still going, but the monitors will not turn back on. Additionally, it seems to cease all network activity. It doesn't seem to log any errors at all. I've verified that this is not a monitor issue, as when I press the num/caps/scroll lock buttons on my keyboard, the lights don't change, so the computer is clearly not accepting input. I have noticed a few other people on the internet with this problem, and some have claimed that it was solved by disabling PCI-Express Link State Power Management, but the issue still occurs for me after this. Whilst my CPU and GPUs both run at 100% 24/7, the temperatures are certainly not at dangerous levels, with the CPU averaging 65°C and the GPUs at 70°C and 78°C average. All components are brand new. I have tried forcing MSI Afterburner to start when Windows starts and to force a constant voltage, as this fixed the issue for a few days for another user, but he reported back saying that it had stopped working properly again, so I'm not putting too much faith in this working. Many people have said to adjust display sleep mode settings, but this will clearly not work, as the keyboard lights would still work if the monitors were the issue. The closest I can get to a log file for this issue is the following Folding@Home logs: 14:45:21:WU01:FS00:0x17:Completed 1120000 out of 2000000 steps (56%) 14:46:43:WU00:FS01:0x17:Completed 480000 out of 2000000 steps (24%) 14:46:49:WU01:FS00:0x17:Completed 1140000 out of 2000000 steps (57%) 14:48:30:WU01:FS00:0x17:Completed 1160000 out of 2000000 steps (58%) 14:49:55:WU01:FS00:0x17:Completed 1180000 out of 2000000 steps (59%) As you can see, the second GPU (FS01) stops computation approximately three and a half minutes before the issue occurs (it should be completing 1% every 80-120 seconds), and the first GPU (FS00) continues for a few minutes more before the logs just end. As far as I can tell, the computer has a network failure at the time the first GPU stops working, the latest IRC message I received from this time was at 14:47:58. That being said, there could have just not been any messages between then and 14:50:00, so I'm going to be connecting a laptop to the same bouncer to double-check if it happens again. The GPUs functioned perfectly well in another computer for a significant period of time, so I'm fairly confident that they aren't the issue, which means that this is being caused by either software or the motherboard, or possibly RAM. I really hope it's software. I heard from a forum board that there was a patch from Microsoft that fixed this problem, but "I've forgot which KB it was or the google search terms I used to find the patch, LOL.", so that's not much help. Haven't seen it mentioned by anyone else on about a dozen threads about this issue either. The computer is plugged in via a surge-protected power board, and I've run several other computers and pieces of hardware through it with no issues, so that is not the cause. I have just set the hard disk to never turn off, although I don't believe that that will solve the issue. Strangely, this has only happened when I'm not at the computer (which is actually a minority of the time). Until today it had only happened when I had not been actively using the computer for 6 hours, but today it happened within 10-30 minutes of me last using the computer actively. I have enabled file logging from MSI Afterburner, so hopefully this will shed some light on the issue, but I'm not too optimistic. I've heard that it could be a motherboard problem, but I figured I should ask around before RMAing it. Any help?

    Read the article

  • How can a code editor effectively hint at code nesting level - without using indentation?

    - by pgfearo
    I've written an XML text editor that provides 2 view options for the same XML text, one indented (virtually), the other left-justified. The motivation for the left-justified view is to help users 'see' the whitespace characters they're using for indentation of plain-text or XPath code without interference from indentation that is an automated side-effect of the XML context. I want to provide visual clues (in the non-editable part of the editor) for the left-justified mode that will help the user, but without getting too elaborate. I tried just using connecting lines, but that seemed too busy. The best I've come up with so far is shown in a mocked up screenshot of the editor below, but I'm seeking better/simpler alternatives (that don't require too much code). [Edit] Taking the heatmap idea (from: @jimp) I get this and 3 alternatives - labelled a, b and c: The following section describes the accepted answer as a proposal, bringing together ideas from a number of other answers and comments. As this question is now community wiki, please feel free to update this. NestView The name for this idea which provides a visual method to improve the readability of nested code without using indentation. Contour Lines The name for the differently shaded lines within the NestView The image above shows the NestView used to help visualise an XML snippet. Though XML is used for this illustration, any other code syntax that uses nesting could have been used for this illustration. An Overview: The contour lines are shaded (as in a heatmap) to convey nesting level The contour lines are angled to show when a nesting level is being either opened or closed. A contour line links the start of a nesting level to the corresponding end. The combined width of contour lines give a visual impression of nesting level, in addition to the heatmap. The width of the NestView may be manually resizable, but should not change as the code changes. Contour lines can either be compressed or truncated to keep acheive this. Blank lines are sometimes used code to break up text into more digestable chunks. Such lines could trigger special behaviour in the NestView. For example the heatmap could be reset or a background color contour line used, or both. One or more contour lines associated with the currently selected code can be highlighted. The contour line associated with the selected code level would be emphasized the most, but other contour lines could also 'light up' in addition to help highlight the containing nested group Different behaviors (such as code folding or code selection) can be associated with clicking/double-clicking on a Contour Line. Different parts of a contour line (leading, middle or trailing edge) may have different dynamic behaviors associated. Tooltips can be shown on a mouse hover event over a contour line The NestView is updated continously as the code is edited. Where nesting is not well-balanced assumptions can be made where the nesting level should end, but the associated temporary contour lines must be highlighted in some way as a warning. Drag and drop behaviors of Contour Lines can be supported. Behaviour may vary according to the part of the contour line being dragged. Features commonly found in the left margin such as line numbering and colour highlighting for errors and change state could overlay the NestView. Additional Functionality The proposal addresses a range of additional issues - many are outside the scope of the original question, but a useful side-effect. Visually linking the start and end of a nested region The contour lines connect the start and end of each nested level Highlighting the context of the currently selected line As code is selected, the associated nest-level in the NestView can be highlighted Differentiating between code regions at the same nesting level In the case of XML different hues could be used for different namespaces. Programming languages (such as c#) support named regions that could be used in a similar way. Dividing areas within a nesting area into different visual blocks Extra lines are often inserted into code to aid readability. Such empty lines could be used to reset the saturation level of the NestView's contour lines. Multi-Column Code View Code without indentation makes the use of a multi-column view more effective because word-wrap or horizontal scrolling is less likely to be required. In this view, once code has reach the bottom of one column, it flows into the next one: Usage beyond merely providing a visual aid As proposed in the overview, the NestView could provide a range of editing and selection features which would be broadly in line with what is expected from a TreeView control. The key difference is that a typical TreeView node has 2 parts: an expander and the node icon. A NestView contour line can have as many as 3 parts: an opener (sloping), a connector (vertical) and a close (sloping). On Indentation The NestView presented alongside non-indented code complements, but is unlikely to replace, the conventional indented code view. It's likely that any solutions adopting a NestView, will provide a method to switch seamlessly between indented and non-indented code views without affecting any of the code text itself - including whitespace characters. One technique for the indented view would be 'Virtual Formatting' - where a dynamic left-margin is used in lieu of tab or space characters. The same nesting-level data used to dynamically render the NestView could also used for the more conventional-looking indented view. Printing Indentation will be important for the readability of printed code. Here, the absence of tab/space characters and a dynamic left-margin means that the text can wrap at the right-margin and still maintain the integrity of the indented view. Line numbers can be used as visual markers that indicate where code is word-wrapped and also the exact position of indentation: Screen Real-Estate: Flat Vs Indented Addressing the question of whether the NestView uses up valuable screen real-estate: Contour lines work well with a width the same as the code editor's character width. A NestView width of 12 character widths can therefore accommodate 12 levels of nesting before contour lines are truncated/compressed. If an indented view uses 3 character-widths for each nesting level then space is saved until nesting reaches 4 levels of nesting, after this nesting level the flat view has a space-saving advantage that increases with each nesting level. Note: A minimum indentation of 4 character widths is often recommended for code, however XML often manages with less. Also, Virtual Formatting permits less indentation to be used because there's no risk of alignment issues A comparison of the 2 views is shown below: Based on the above, its probably fair to conclude that view style choice will be based on factors other than screen real-estate. The one exception is where screen space is at a premium, for example on a Netbook/Tablet or when multiple code windows are open. In these cases, the resizable NestView would seem to be a clear winner. Use Cases Examples of real-world examples where NestView may be a useful option: Where screen real-estate is at a premium a. On devices such as tablets, notepads and smartphones b. When showing code on websites c. When multiple code windows need to be visible on the desktop simultaneously Where consistent whitespace indentation of text within code is a priority For reviewing deeply nested code. For example where sub-languages (e.g. Linq in C# or XPath in XSLT) might cause high levels of nesting. Accessibility Resizing and color options must be provided to aid those with visual impairments, and also to suit environmental conditions and personal preferences: Compatability of edited code with other systems A solution incorporating a NestView option should ideally be capable of stripping leading tab and space characters (identified as only having a formatting role) from imported code. Then, once stripped, the code could be rendered neatly in both the left-justified and indented views without change. For many users relying on systems such as merging and diff tools that are not whitespace-aware this will be a major concern (if not a complete show-stopper). Other Works: Visualisation of Overlapping Markup Published research by Wendell Piez, dated from 2004, addresses the issue of the visualisation of overlapping markup, specifically LMNL. This includes SVG graphics with significant similarities to the NestView proposal, as such, they are acknowledged here. The visual differences are clear in the images (below), the key functional distinction is that NestView is intended only for well-nested XML or code, whereas Wendell Piez's graphics are designed to represent overlapped nesting. The graphics above were reproduced - with kind permission - from http://www.piez.org Sources: Towards Hermenutic Markup Half-steps toward LMNL

    Read the article

  • 24+ Coda Alternatives for Windows and Linux

    - by Matt
    Coda plays an important role in designing layout on Mac. There are numerous coda alternatives for windows and Linux too. It is not possible to describe each and everyone so some of the coda alternatives, which work on both windows and Linux platforms, are discussed below. EditPlus $35.00 Good thing about EditPlus is that it highlights URLs and email addresses, activating them when you ‘crtl + double-click’. It also has a built in browser for previewing HTML, and FTP and SFTP support. Also supports Macros and RegEx find and replace. UltraEdit $49.99 It is another good coda alternative for windows and Linux. It is the best suited editor for text, HTML and HEX. It also plays an advanced PHP, Perl, Java and JavaScript editor for programmers. It supports disk-based 64-bit or standard file handling on 32-bit Windows platforms or window 2000 and later versions. HippoEdit $39.95 HippoEDIT has the best autocomplete it gives pop a ‘tooltip’ above your cursor as you type, suggesting words you’ve already typed. It does syntax highlighting for over 2 dozen language. Sublime Text $59.00 Sublime Text awesome ‘zoomed out’ view of the file lets you focus on the area you want. It lets you open a local file when you right-click on its link, and there are a few automation features, so this would make a solid choice of a text editor. Textpad $24.70 TextPad is simple editor with nifty features such as column select, drag-and-drop text between files, and hyperlink support. It also supports large files. Aptana Free Aptana Studio is one of the best editors working on both windows and Linux. It is a complete web development setting that has a nice blend of powerful authoring tools with a collection of online hosting and collaboration services. It is quite helpful as it support for PHP, CSS, FTP, and more. SciTE Free It is a SCIntilla based Text Editor. It has gradually developed as a generally useful editor. It provides for building and running programs. It is best to be used for jobs with simple configurations. SciTE is currently available for Intel Win32 and Linux compatible operating systems with GTK+. It has been run on Windows XP and on Fedora 8 and Ubuntu 7.10 with GTK+ 2.12 E Text Editor $34.96 E Text Editor is a new text editor for Windows, which also works on Linux as well. It has powerful editing features and also some unique abilities. It makes text manipulation quite fast and easy, and makes user focus on his writing as it automatically does all the manual work. It can be extend it in any language. It supports Text Mate bundles, thus allows the user to tap into a huge and active community. Editra Free Editra is an upcoming editor, with some fantastic features such as user profiles, auto-completion, session saving, and syntax highlighing for 60+ languages. Plugins can extend the feature set, offering an integrated python console, FTP client, file browser, and calculator, among others. PSPad Free PSPad is a good Template for writing CSS, as it an internal web browser, and a macro recorder to the table. It also supports hex editing, and some degree of code compiling. JEdit Free It is a mature programmer’s text editor and has taken a good deal of time to be developed as it is today. It is better than many costlier development tools due to its features and simplicity of use. It has been released as free software with full source code, provided under the terms of the GPL 2.0. Which also adds to its attractiveness. NEdit Free It is a multi-purpose text editor for the X Window System, which also works on Linux. It combines a standard, easy to use, graphical user interface with the full functionality and stability required by users who edit text for long period a day. It also provides for thorough support for development in various languages. It also facilitates the use of text processors, and other tools at the same time. It can be used productively by anyone who needs to edit text. It is quite a user-friendly tool. Its salient features include syntax highlighting with built in pattern, auto indent, tab emulation, block indentation adjustment etc. As of version 5.1, NEdit may be freely distributed under the terms of the GNU General Public License. MadEdit Free Mad Edit is an Open-Source and Cross-Platform Text/Hex Editor. It is written in C++ and wxWidgets. MadEdit can edit files in Text/Column/Hex modes. It also supports many useful functions, such as Syntax Highlighting, Word Wrap, Encoding for UTF8/16/32,and others. It also supports word count, which makes it quite a useful text editor for both windows and Linux. It has been recently modified on 10/09/2010. KompoZer Free Kompozer is a complete web authoring system that has a combination of web file management and easy-to-use WYSIWYG web page editing. KompoZer has been designed to be completely and extensively easy to use. It is thus an ideal tool for non-technical computer users who want to create an attractive, professional-looking web site without knowing HTML or web coding. It is based on the NVU source code. Vim Free Vim or “Vi IMproved” is an advanced text editor. Its salient features are syntax highlighting, word completion and it also has a huge amount of contributed content. Vim has several “modes” on offer for editing, which adds to the efficiency in editing. Thus it becomes a non-user-friendly application but it is also strength for its users. The normal mode binds alphanumeric keys to task-oriented commands. The visual mode highlights text. More tools for search & replace, defining functions, etc. are offered through command line mode. Vim comes with complete help. NotePad ++ Free One of the the best free text editor for Windows out there; with support for simple things—like syntax highlighting and folding—all the way up to FTP, Notepad++ should tick most of the boxes Notepad2 Free Notepad2 is also based on the Scintilla editing engine, but it’s much simpler than Notepad++. It bills itself as being fast, light-weight, and Notepad-like. Crimson Editor Free Crimson Editor has the ability to edit remote files, using a built-in FTP client; there’s also a spell checker. TotalEdit Free TotalEdit allows file comparison, RegEx search and replace, and has multiple options for file backup / versioning. For cleanup, it offers (X)HTML and XML customizable formatting, and a spell checker. In-Type Free ConTEXT Free SourceEdit Free SourceEdit includes features such as clipboard history, syntax highlighting and autocompletion for a decent set of languages. A hex editor and FTP client. RJ TextED Free RJ TextED supports integration with TopStyle Lite. Provides HTML validation and formatting. It includes an FTP client, a file browser, and a code browser, as well as a character map and support for email. GEDIT Free It is one of the best coda alternatives for windows and Linux. It has syntax highlighting and is best suitable for programming. It has many attractive features such as full support for UTF-8, undo/redo, and clipboard support, search and replace, configurable syntax highlighting for various languages and many more supportive features. It is extensible with plug ins. Other important coda alternatives for windows and Linux are Redcar, Bluefish Editor, NVU, Ruby Mine, Slick Edit, Geany, Editra, txt2html and CSSED. There are many more. Its up to user to decide which one suits best to his requirements. Related posts:10 Useful Text Editor For Developer Applications to Install & Run Windows on Linux Open Source WYSIWYG Text Editors

    Read the article

  • How to select the first ocurrence in the auto-completion menu by pressing Enter?

    - by janoChen
    Every time there's is a pop up menu. I select the first occurrence and press enter but nothing happens (the word is not completed with he selected occurrence). The only way is to press Tab until you reach the term for a second time. Is there a way of selecting the first occurrence pressing Enter (or other Vim hotkey)? My .vimrc: " SHORTCUTS nnoremap <F4> :set filetype=html<CR> nnoremap <F5> :set filetype=php<CR> nnoremap <F3> :TlistToggle<CR> " press space to turn off highlighting and clear any message already displayed. nnoremap <silent> <Space> :nohlsearch<Bar>:echo<CR> " set buffers commands nnoremap <silent> <M-F8> :BufExplorer<CR> nnoremap <silent> <F8> :bn<CR> nnoremap <silent> <S-F8> :bp<CR> " open NERDTree with start directory: D:\wamp\www nnoremap <F9> :NERDTree /home/alex/www<CR> " open MRU nnoremap <F10> :MRU<CR> " open current file (silently) nnoremap <silent> <F11> :let old_reg=@"<CR>:let @"=substitute(expand("%:p"), "/", "\\", "g")<CR>:silent!!cmd /cstart <C-R><C-R>"<CR><CR>:let @"=old_reg<CR> " open current file in localhost (default browser) nnoremap <F12> :! start "http://localhost" file:///"%:p""<CR> " open Vim's default Explorer nnoremap <silent> <F2> :Explore<CR> nnoremap <C-F2> :%s/\.html/.php/g<CR> " REMAPPING " map leader to , let mapleader = "," " remap ` to ' nnoremap ' ` nnoremap ` ' " remap increment numbers nnoremap <C-kPlus> <C-A> " COMPRESSION function Js_css_compress () let cwd = expand('<afile>:p:h') let nam = expand('<afile>:t:r') let ext = expand('<afile>:e') if -1 == match(nam, "[\._]src$") let minfname = nam.".min.".ext else let minfname = substitute(nam, "[\._]src$", "", "g").".".ext endif if ext == 'less' if executable('lessc') cal system( 'lessc '.cwd.'/'.nam.'.'.ext.' &') endif else if filewritable(cwd.'/'.minfname) if ext == 'js' && executable('closure-compiler') cal system( 'closure-compiler --js '.cwd.'/'.nam.'.'.ext.' > '.cwd.'/'.minfname.' &') elseif executable('yuicompressor') cal system( 'yuicompressor '.cwd.'/'.nam.'.'.ext.' > '.cwd.'/'.minfname.' &') endif endif endif endfunction autocmd FileWritePost,BufWritePost *.js :call Js_css_compress() autocmd FileWritePost,BufWritePost *.css :call Js_css_compress() autocmd FileWritePost,BufWritePost *.less :call Js_css_compress() " GUI " taglist right side let Tlist_Use_Right_Window = 1 " hide tool bar set guioptions-=T "remove scroll bars set guioptions+=LlRrb set guioptions-=LlRrb " set the initial size of window set lines=46 columns=180 " set default font set guifont=Monospace " set guifont=Monospace\ 10 " show line number set number " set default theme colorscheme molokai-2 " encoding set encoding=utf-8 setglobal fileencoding=utf-8 bomb set fileencodings=ucs-bom,utf-8,latin1 " SCSS syntax highlight au BufRead,BufNewFile *.scss set filetype=scss " LESS syntax highlight syntax on au BufNewFile,BufRead *.less set filetype=less " Haml syntax highlight "au! BufRead,BufNewFile *.haml "setfiletype haml " Sass syntax highlight "au! BufRead,BufNewFile *.sass "setfiletype sass " set filetype indent filetype indent on " for snipMate to work filetype plugin on " show breaks set showbreak=-----> " coding format set tabstop=4 set shiftwidth=4 set linespace=1 " CONFIG " set location of ctags let Tlist_Ctags_Cmd='D:\ctags58\ctags.exe' " keep the buffer around when left set hidden " enable matchit plugin source $VIMRUNTIME/macros/matchit.vim " folding set foldmethod=marker set foldmarker={,} let g:FoldMethod = 0 map <leader>ff :call ToggleFold()<cr> fun! ToggleFold() if g:FoldMethod == 0 exe 'set foldmethod=indent' let g:FoldMethod = 1 else exe 'set foldmethod=marker' let g:FoldMethod = 0 endif endfun " save and restore folds when a file is closed and re-opened "au BufWrite ?* mkview "au BufRead ?* silent loadview " auto-open NERDTree everytime Vim is invoked au VimEnter * NERDTree /home/alex/www " set omnicomplete autocmd FileType python set omnifunc=pythoncomplete#Complete autocmd FileType javascript set omnifunc=javascriptcomplete#CompleteJS autocmd FileType html set omnifunc=htmlcomplete#CompleteTags autocmd FileType css set omnifunc=csscomplete#CompleteCSS autocmd FileType xml set omnifunc=xmlcomplete#CompleteTags autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType c set omnifunc=ccomplete#Complete " Remove trailing white-space once the file is saved au BufWritePre * silent g/\s\+$/s/// " Use CTRL-S for saving, also in Insert mode noremap <C-S> :update!<CR> vnoremap <C-S> <C-C>:update!<CR> inoremap <C-S> <C-O>:update!<CR> " DEFAULT set nocompatible source $VIMRUNTIME/vimrc_example.vim "source $VIMRUNTIME/mswin.vim "behave mswin " disable creation of swap files set noswapfile " no back ups wwhile editing set nowritebackup " disable creation of backups set nobackup " no file change pop up warning autocmd FileChangedShell * echohl WarningMsg | echo "File changed shell." | echohl None set diffexpr=MyDiff() function MyDiff() let opt = '-a --binary ' if &diffopt =~ 'icase' | let opt = opt . '-i ' | endif if &diffopt =~ 'iwhite' | let opt = opt . '-b ' | endif let arg1 = v:fname_in if arg1 =~ ' ' | let arg1 = '"' . arg1 . '"' | endif let arg2 = v:fname_new if arg2 =~ ' ' | let arg2 = '"' . arg2 . '"' | endif let arg3 = v:fname_out if arg3 =~ ' ' | let arg3 = '"' . arg3 . '"' | endif let eq = '' if $VIMRUNTIME =~ ' ' if &sh =~ '\<cmd' let cmd = '""' . $VIMRUNTIME . '\diff"' let eq = '"' else let cmd = substitute($VIMRUNTIME, ' ', '" ', '') . '\diff"' endif else let cmd = $VIMRUNTIME . '\diff' endif silent execute '!' . cmd . ' ' . opt . arg1 . ' ' . arg2 . ' > ' . arg3 . eq endfunction

    Read the article

  • Adding UL to jQuery UI Tabs

    - by Dave Kiss
    It seems like whenever I try to add a UL inside of the containers when using jQuery UI - Tabs, it breaks the javascript. Is there a way I can use a UL inside of these containers that I am missing? Thanks <div id="tabs"> <div id="fragment-1"> <h4>Pre-Press Requirements</h4> ? SAMPLE of final artwork with noted sizes. ? NATIVE FILES & High Resolution PDF preferred. Files must be created or saved to the listed accepted file formats. ? FONTS used in files need to be supplied in a separate folder marked "fonts". Please ensure all families (screen & printer) fonts are supplied for the job. ? IMAGES must be saved as CMYK and no less than 300dpi. NO RGB FILES! We prefer images to be TIF or EPS formats. If you are submitting artwork for spot color printing vector artwork is preferred. Your images should be supplied in a separate folder marked "links". This will ensure proper reproduction of your artwork. ? COLORS need to be clearly specified. Pantone (PMS) colors preferred. Please specify if job is to be printed CMYK, spot color, etc. ? BLEEDS should be no less than .25" ? PDF's should be High Resolution. Please include any spot colors or CMYK format for full color printing. NO RGB FILES! All bleeds should be included with trim marks. All fonts must be embedded or outlined. No "layered" PDF files. </div> <div id="fragment-2"> <p>Our presses are all capable of sizes up to 11" x 17" using spot color or full color.</p> </div> <div id="fragment-3"> <p>USA Quickprint has complete in house bindery to finish each job to meet your needs.</p> <ul> <li>Folding</li> <li>Scoring</li> <li>Perforation</li> <li>Drilling</li> <li>Shrink Wrap</li> <li>Trimming</li> <li>Collating</li> <li>Spiral Binding</li> <li>GBC Binding</li> <li>Padding</li> <li>Stapling</li> <li>Numbering</li> <li>Lamination</li> </ul> </div>

    Read the article

  • Book Review - Programming Windows Azure by Siriram Krishnan

    - by BuckWoody
    As part of my professional development, I’ve created a list of books to read throughout the year, starting in June of 2011. This a review of the first one, called Programming Windows Azure by Siriram Krishnan. You can find my entire list of books I’m reading for my career here: http://blogs.msdn.com/b/buckwoody/archive/2011/06/07/head-in-the-clouds-eyes-on-the-books.aspx  Why I Chose This Book: As part of my learning style, I try to read multiple books about a single subject. I’ve found that at least 3 books are necessary to get the right amount of information to me. This is a “technical” work, meaning that it deals with technology and not business, writing or other facets of my career. I’ll have a mix of all of those as I read along. I chose this work in addition to others I’ve read since it covers everything from an introduction to more advanced topics in a single book. It also has some practical examples of actually working with the product, particularly on storage. Although it’s dated, many examples normally translate. I also saw that it had pretty good reviews. What I learned: I learned a great deal about storage, and many useful code snippets. I do think that there could have been more of a focus on the application fabric - but of course that wasn’t as mature a feature when this book was written. I learned some great architecture examples, and in one section I learned more about encryption. In that example, however, I would rather have seen the examples go the other way - the book focused on moving data from on-premise to Azure storage in an encrypted fashion. Using the Application Fabric I would rather see sensitive data left in a hybrid fashion on premise, and connect to for the Azure application. Even so, the examples were very useful. If you’re looking for a good “starter” Azure book, this is a good choice. I also recommend the last chapter as a quick read for a DBA, or Database Administrator. It’s not very long, but useful. Note that the limits described are incorrect - which is one of the dangers of reading a book about any cloud offering. The services offered are updated so quickly that the information is in constant danger of being “stale”. Even so, I found this a useful book, which I believe will help me work with Azure better. Raw Notes: I take notes as I read, calling that process “reading with a pencil”. I find that when I do that I pay attention better, and record some things that I need to know later. I’ll take these notes, categorize them into a OneNote notebook that I synchronize in my Live.com account, and that way I can search them from anywhere. I can even read them on the web, since the Live.com has a OneNote program built in. Note that these are the raw notes, so they might not make a lot of sense out of context - I include them here so you can watch my though process. Programming Windows Azure by Siriram Krishnan: Learning about how to select applications suitable for Distributed Technology. Application Fabric gets the least attention; probably because it was newer at the time. Very clear (Chapter One) Good foundation Background and history, but not too much I normally arrange my descriptions differently, starting with the use-cases and moving to physicality, but this difference helps me. Interesting that I am reading this using Safari Books Online, which uses many of these concepts. Taught me some new aspects of a Hypervisor – very low-level information about the Azure Fabric (not to be confused with the Application Fabric feature) (Chapter Two) Good detail of what is included in the SDK. Even more is available now. CS = Cloud Service (Chapter 3) Place Storage info in the configuration file, since it can be streamed in-line with a running app. Ditto for logging, and keep separated configs for staging and testing. Easy-switch in and switch out.  (Chapter 4) There are two Runtime API’s, one of external and one for internal. Realizing how powerful this paradigm really is. Some places seem light, and to drop off but perhaps that’s best. Managing API is not charged, which is nice. I don’t often think about the price, until it comes to an actual deployment (Chapter 5) Csmanage is something I want to dig into deeper. API requires package moves to Blob storage first, so it needs a URL. Csmanage equivalent can be written in Unix scripting using openssl. Upgrades are possible, and you use the upgradeDomainCount attribute in the Service-Definition.csdef file  Always use a low-privileged account to test on the dev fabric, since Windows Azure runs in partial trust. Full trust is available, but can be dangerous and must be well-thought out. (Chapter 6) Learned how to run full CMD commands in a web window – not that you would ever do that, but it was an interesting view into those links. This leads to a discussion on hosting other runtimes (such as Java or PHP) in Windows Azure. I got an expanded view on this process, although this is where the book shows its age a little. Books can be a problem for Cloud Computing for this reason – things just change too quickly. Windows Azure storage is not eventually consistent – it is instantly consistent with multi-phase commit. Plumbing for this is internal, not required to code that. (Chapter 7) REST API makes the service interoperable, hybrid, and consistent across code architectures. Nicely done. Use affinity groups to keep data and code together. Side note: e-book readers need a common “notes” feature. There’s a decent quick description of REST in this chapter. Learned about CloudDrive code – PowerShell sample that mounts Blob storage as a local provider. Works against Dev fabric by default, can be switched to Account. Good treatment in the storage chapters on the differences between using Dev storage and Azure storage. These can be mitigated. No, blobs are not of any size or number. Not a good statement (Chapter 8) Blob storage is probably Azure’s closest play to Infrastructure as a Service (Iaas). Blob change operations must be authenticated, even when public. Chapters on storage are pretty in-depth. Queue Messages are base-64 encoded (Chapter 9) The visibility timeout ensures processing of message in a disconnected system. Order is not guaranteed for a message, so if you need that set an increasing number in the queue mechanism. While Queues are accessible via REST, they are not public and are secured by default. Interesting – the header for a queue request includes an estimated count. This can be useful to create more worker roles in a dynamic system. Each Entity (row) in the Azure Table service is atomic – all or nothing. (Chapter 10) An entity can have up to 255 Properties  Use “ID” for the class to indicate the key value, or use the [DataServiceKey] Attribute.  LINQ makes working with the Azure Table Service much easier, although Interop is certainly possible. Good description on the process of selecting the Partition and Row Key.  When checking for continuation tokens for pagination, include logic that falls out of the check in case you are at the last page.  On deleting a storage object, it is instantly unavailable, however a background process is dispatched to perform the physical deletion. So if you want to re-create a storage object with the same name, add retry logic into the code. Interesting approach to deleting an index entity without having to read it first – create a local entity with the same keys and apply it to the Azure system regardless of change-state.  Although the “Indexes” description is a little vague, it’s interesting to see a Folding and Stemming discussion a-la the Porter Stemming Algorithm. (Chapter 11)  Presents a better discussion of indexes (at least inverted indexes) later in the chapter. Great treatment for DBA’s in Chapter 11. We need to work on getting secondary indexes in Table storage. There is a limited form of transactions called “Entity Group Transactions” that, although they have conditions, makes a transactional system more possible. Concurrency also becomes an issue, but is handled well if you’re using Data Services in .NET. It watches the Etag and allows you to take action appropriately. I do not recommend using Azure as a location for secure backups. In fact, I would rather have seen the examples in (Chapter 12) go the other way, showing how data could be brought back to a local store as a DR or HA strategy. Good information on cryptography and so on even so. Chapter seems out of place, and should be combined with the Blob chapter.  (Chapter 13) on SQL Azure is dated, although the base concepts are OK.  Nice example of simple ADO.NET access to a SQL Azure (or any SQL Server Really) database.  

    Read the article

  • CodePlex Daily Summary for Wednesday, June 29, 2011

    CodePlex Daily Summary for Wednesday, June 29, 2011Popular ReleasesCandescent NUI: Candescent NUI (8263): This is the binary version of the source code in change set 8263.Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.4: Fix for http://coding4fun.codeplex.com/workitem/6869 was incomplete. Back button wouldn't return app bar. Corrected now. High impact bugSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.528.279): Added keyboard shortcuts: - Cut (CTRL+X) - Copy (CTRL+C) - Paste (CTRL+V) - Delete (CTRL+D) - Move up (CTRL+UP ARROW) - Move down (CTRL+DOWN ARROW) Added ability to save/load SiteMap from/to a Xml file on disk Bug fix: - Connect to a server through the status bar was throwing error "Object Reference not set to an instance of an object" - Rename TreeNode.Name after changing TreeNode.TextMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample: V2.01 ALPHA N-Layered SampleApp .NET 4.0 and EF4.1: V2.0.01 - ALPHARequired Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power ...Mosaic Project: Mosaic Alpha build 261: - Fixed crash when pinning applications in x64 OS - Added Hub to video widget. It shows videos from Video library (only .wmv and .avi). Can work slow if there are too much files. - Fixed some issues with scrolling - Fixed bug with html widgets - Fixed bug in Gmail widget - Added html today widget missed in previous release - Now Mosaic saves running widgets if you restarting from optionsEnhSim: EnhSim 2.4.9 BETA: 2.4.9 BETAThis release supports WoW patch 4.2 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in some of th....NET Reflector Add-Ins: Reflector V7 Add-Ins: All the add-ins compiled for Reflector V7TerrariViewer: TerrariViewer v4.1 [4.0 Bug Fixes]: Version 4.1 ChangelogChanged how users will Open Player files (This change makes it much easier) This allowed me to remove the "Current player file" labels that were present Changed file control icons Added submit bug button Various Bug Fixes Fixed crashes related to clicking on buffs before a character is loaded Fixed crashes related to selecting "No Buff" when choosing a new buff Fixed crashes related to clicking on a "Max" button on the buff tab before a character is loaded Cor...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta8: ??AcDown???????????????,?????????????????????。????????????????????,??Acfun、Bilibili、???、???、?????,???????????、???????。 AcDown???????????????????????????,???,???????????????????。 AcDown???????C#??,?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ??v3.0 Beta8 ?? ??????????????? ???????????????(??????????) ???????...BlogEngine.NET: BlogEngine.NET 2.5: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.5 instructions. To get started, be sure to check out our installatio...PHP Manager for IIS: PHP Manager 1.2 for IIS 7: This release contains all the functionality available in 62183 plus the following additions: Command Line Support via PowerShell - now it is possible to manage and script PHP installations on IIS by using Windows PowerShell. More information is available at Managing PHP installations with PHP Manager command line. Detection and alert when using local PHP handler - if a web site or a directory has a local copy of PHP handler mapping then the configuration changes made on upper configuration ...MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...patterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...New ProjectsA web interface for data search and download to CUAHSI HIS: Hydroweb is an innovative user interface (GUI) created for web driven hydrology data search and download from CUAHSI Hydrologic Information System (HIS). The project has been developed in c#/Silverlight programming environment by leveraging the Bing map Silverlight tools.AcesUp: It's a desktop game developed using Windows Forms. The Game can currently run only if the screen resolution is 1024 x 786. It's a modern implementation of the classic cards game Aces Up. The version that is currently available is called AcesUp Ultimate. Enjoy!AES Encryptor: AES Encryptor (AES.E) is an simple, user-friendly text file encryption program using the Advanced Encryption System (AES). Encryption keys are based on the password that is registered with the program. AES.E is written in Visual Basic.AML Studio: AML Studio makes it easier for developers who are extending Aras Innovator to develop AML queries. Queries can be developed and run using a smart editor with syntax highlighting, code folding, and Intellisense. It's developed in C#.Arca4: Arca4 is a chat server for the Ares Galaxy File Sharing Network. It's developed in C# 4.0.Basic SharePoint-Google-Maps-WebPart for SharePoint-Lists: This JavaScript-Solution improves the standard-functionality of SharePoint-Lists. It displays a new Menu-Link in the standard Menu-Toolbar of a SharePoint-List (which contains addresses / coordinates). By clicking this link Google-Maps will be displayed under the SharePoint-List.BikeBouncer, bike protection for all: Bike registration and protection for free! BikeBouncer helps cyclists keeping their bikes away from thieves. Website: http://bikebouncer.com. The source is now open so people can contribute with new ideas.Cli: General purpose commandline interface for c# projects. Inherit this class and get cli for free. Plan for other languages in the future.CLIRES-3 Clinical Study/Trial Research (MVC3 - Web Application) by Tateeda.com: Clinical Study/trials research application to track subjects and their medication, visits. Dynamically create questioners/survey forms, visits, manage medications, sites, visit schedules and so on. Application is pre loaded with forms for Bipolar disorder study and 2500 related medications. Full administrative functionality HIPPA and CFR part 11 implementation. Easy to adopt for any other type of clinical study research. Technology: MVC3, C3 4.0, EF 4.0, jQuery 1.6, MS SQL 2008 R2CloudShot: CloudShot is a simple application to create screenshots and automatically upload it to your dropbox.CodingWheels.DataTypes: DataTypes tries to make it easier for developers to have concrete typesafe objects for working with many common forms of data. Many times these data objects are just doubles or ints floating through your code with abbreviations on them describing what they represent.CommonLibrary.NET Extensions: Highly re-usable code and components that are extensions to CommonLibrary.NET.CommonLibrary.NET Web: Highly re-usable web based code and components that are extensions to the CommonLibrary.NET.CRM 2011 Maintenance Job Editor: This utility is to be used for editing the CRM 2011 maintenance jobs which are automatically scheduled by the installation of CRM. This utility provides similar functionality to CRM 4.0's Scale Group Job Editor [url:http://archive.msdn.microsoft.com/ScaleGroupJobEditor]. Due to the changes in CRM 2011 many modifications had to be made and the functionality has been altered slightly. I look forward to your thoughts and comments on the changes. Excel add-in for BLAS routines: summaryExcel add-in for floating point numbers: Excel add-in for floating point number routines and utilities.Excel add-in for LAPACK routines: LAPACKExcel add-in for market aware date and time routines.: Date and time functions for Excel that know about market conventions such as day count and roll conventions.F# Math Visualizer: MathVisualizer, scirtto in F#, permette di visualizzare espressioni matematiche. Le espressioni devo essere scritte dall'utente seguendo una determinata sintassi. In particolare un espressione puo' essere scritta in maniera estesa, contratta o ibrida.FSharp Toolkit: Contents for build applications on F#.HiFreamWork: Hi,FreamWork C# Custom Library Used Microsoft.Practices.EnterpriseLibrary. ruiyuxing MSN/Mail:ryx1984ryx#hotmail.com QQ:120897051 http://www.cnfield.comhozoroghiab: hozoroghiab is absent o present systemHtml Parametric Web Part: A Web Part to build html with parameters taken from the context of SharePoint 2007ios-framework: ios framework projectITextSharp Sample: ????IText Sharp????,????????PDF??,????flash,????LinGoRoom: Language lab technology-based "thin client". NAudio used for audio capture and playback. The project was developed in C #.Microsoft Dynamics CRM 2011 Customization Editor: Visual Studio 2010 and stand-alone tool that will allow the Customizations.xml to be viewed in a tree structure, with custom editors for each component. Initially editors for the supported Ribbon Editor, Sitemap and ISV.config will be included, with Read-only views for Forms.Modbus for .NET: C# implementation of Modbus communication protocol.Multi-Server MVC Elmah Log Viewer: An Elmah Log viewer for multiple elmah logs.MVC Scaffolding for WCF Data Services: This project contains a set of custom templates for MVC Scaffolding that will allow you to scaffold against a WCF Data Service (oData). Using these templates you can scaffold your client side DataServiceContext, Controller and Views using MVC Scaffolding, allowing you to quickly get a milti tiered MVC application up and running. You can use pretty much any oData feed as long as you have the entities for your ADO .NET Data Service defined in your solution these templates should work. OABValidate: This tool is for tracking down unresolvable DNs on directory objects when you have an Exchange server where Offline Address List generation (oabgen) is failing with event 9339 and error code 8004010e.onForms: Weekly fresh this is deletedOpenNETCF Calendar Controls: OpenNETCF Calendar Controls provide a Month View, Week View and Agenda View similar to what is used in the Pocket Outlook Calendar application. Pedal Architecture: Pedal Architecture allows you to quickly build enteprise applications. It currently supports building and hosting composable Windows Communication Foundation services using MEF.powerdown: ?????。rl: rlRooBooks: RooBooks - Books management tool for students and such. (circa 2004)SciFun: simple playground..SIGPRO Desktop: FUNCERNSistema De Tallet: Vehicles tallerSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor for Microsoft Dynamics CRM 2011 helps developer and customizers to configure the Site Map in a graphical way. You'll no longer have to create solution, add component, export, update Xml and reimport the solution to update the SiteMap.The Electrolytes Website: The Electrolytes Band WebsiteThe Professions: The Professions work items are generalised for professional use. The professions are for highly skilled professionals who have earned their place in society through education, dedication, and specialization in some cases. The associations for particular professions are encouragedUpdateTool: A tool used to update client This project is for personal use. Please do not download in now.WcfFront: Automatic publisher of WCF ServicesWolfpack.Contrib: Contrib project for WolfPack monitoring

    Read the article

  • CodePlex Daily Summary for Wednesday, November 24, 2010

    CodePlex Daily Summary for Wednesday, November 24, 2010Popular ReleasesEdinamarry Free Tarot Software for Windows: Edinamarry Free Tarot Software Version 3.12: Version 3.12 - 24th November, 2010::: Contains new features and components. Fixed bugs too. History: Version 3.10 - 19th November 2010::: Contains bug fixes and replacements for older features. Added Collapsible Panels support. Client profiles and all cards data import and export, storage is now done in standalone databases. A new 2010-2011 Windows 7/XP freeware Tarot and Divinity Software for PC and Windows 7. Edinamarry brings to you an open Tarot Scribe Kit by which you can create your ...Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).Minemapper: Minemapper v0.1.2: Added cave and nether support. Added ability to enter a height (press enter or 'set height' button). Added View menu, moved 'Show Navigation Controls' there. Added View->Background Color menu to change the canvas background color (preference not currently saved). Improved handling of height change (still not perfect, think it can be made faster). Images are now cached in %APPDATA%\Minemapper, organized by world, then direction, then mode (cave, day, night, nether), then skylight, th...BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...Wii Backup Fusion: Wii Backup Fusion 0.8.2 Beta: New in this release: - Update titles after language change - Tool tips for name/title - Transfer DVD to a specific image file - Download titles from wiitdb.com - Save Settings geometry - Titles and Cover language global in settings - Convert Files (images) to another format - Format WBFS partition - Create WBFS file - WIT path configurable in settings - Save last path in Files/Load - Sort game lists - Save column width - Sequenz of columns changeable - Set indicated columns in settings - Bus...SQL Monitor: SQL Monitor 1.3: 1. change sys.sysprocesses to DMV: http://msdn.microsoft.com/en-us/library/ms187997.aspx select * from sys.dm_exec_connections select * from sys.dm_exec_requests select * from sys.dm_exec_sessions 2. adjust columns to fit without scrollingVFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6DotSpatial: DotSpatial 11-21-2010: This release introduces the following Fixed bugs related to dispose, which caused issues when reordering layers in the legend Fixed bugs related to assigning categories where NULL values are in the fields New fast-acting resize using a bitmap "prediction" of what the final resize content will look like. ImageData.ReadBlock, ImageData.WriteBlock These allow direct file access for reading or writing a rectangular window. Bitmaps are used for holding the values. Removed the need to stor...MDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Home Access Plus+: v5.4.4: Version 5.4.4Change Log: Added logic to the My Computer Browsers to allow for users with no home directories (set in ad anyhow) Renamed the My School Computer Enhanced page to My School Computer Extended Edition File Changes: ~/bin/hap.web.dll ~/clientbin/hap.silverlight.xap ~/mycomputersl.aspx.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Christoc's DotNetNuke Module Development Template: 00.00.05: This release of the DotNetNuke Module Development Templates replaces the NANT scripts with MSBuild scripts. You will need to download and install the MSBuildTasks MSI file from http://msbuildtasks.tigris.org/, it's pretty straight forward without needing any sort of customization during installation. To install these templates copy the ZIP file downloaded into your My Documents\Visual Studio 2008 (or 2010)\Templates\Project Templates\C#(or VB)\Web folder (if the WEB folder doesn't exist, cre...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...New ProjectsAdventureWorks Products: This is a very simple module built for DNN 5.01.00 and up which allows you to edit some basic AdventureWorks product data. The module displays skin techniques.Amnesia: Transacts all changes to a website to facilitate automated UI testing. Queries from the automated test can also query the application database without blocking and participate in the transaction.DBA Inventory: DBA Inventory is a SQL Server based project to help inventory, manage, control, and report on a large SQL Server infrastructure without requiring agents on the target. dcorp: ?????? cmsFoldingAnalysis: Software para monitoramento de cliente folding@homeHelpSystem2010: testei2iPortal: i2i Technologies projectLucandra.NET: Lucandra.NET is a Lucene + Cassandra implementation written in C# which is based on the Lucandra (Java) project by Jake Luciani. Apache's Lucene is a high-performance full-text search engine, and Apache's Cassandra is a promising NoSQL database, originally developed by Facebook.MSBuild ConfigTransform for Visual Studio: MSbuild ConfigTransform makes transforming of config files (xml) an integrated part of your Visual Studio 2010 build action (CTRL+SHIFT+B or SHIFT+F6 or what your keyboards shortcut are set to) Provides optional fail on build on failed transformation of xml with error messagesNyx Editor: Nyx is a free, open-source game development tool aimed at making the creation and edition of levels or maps easy and enjoyable. Nyx exports level data as JSON, XML, or binary making it malleable to your own projects, engines, and needs.openfleet: This is a modular open source project to control fleets. It's a fork of the gofleet project (http://gitorious.org/gofleet).PoShRabbit: A PowerShell module to enable messaging against a Rabbit MQ server. Provides deeply integrated facilities for handling message queues and subscriptions using scripts. Enables PowerShell scripts to publish messages in Rabbit exchanges.Silverlight and WP7 Exception Handling and Logging building block: This code will help you handle and log client side exceptions in your Silverlight 4 and WP7 projects. Errors that occur in clients can be sent to your loggingservice. The service will store them. It's developed in C#, using VS2010.student admission system: this is emerson college registration system.Useful Desktop Components: Este artigo discute o uso de alguns componentes que podem ser muito úteis no dia a dia de um programador desktop como por exemplo manipulação de textos RTF, criptografias, validações, armazenamento de arquivos, validações de CPF e CNPJ, entre outros.WPF Calendar and DatePicker Themes: WPF Calendar and DatePicker ThemesWPF PropertyGrid Control: WPF PropertyGrid ControlWrix Development Kit: One development kit for internet and enterprise both.XNAPF: This project aims to create a control for integrating easily an XNA rendering in a WPF picture. xSNMP Extensions for System Center OpsMgr 2007: Developed by OpsMgr users with substantial community input, and tested extensively in implementations around the world, the xSNMP Management Pack suite is a powerful open-source SNMP monitoring implementation for Microsoft System Center Operations Manager 2007 R2 environments.

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >