Search Results

Search found 121 results on 5 pages for 'jeames bone'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• How to use mount points in MilkShape models?

  - by vividos

  I have bought the Warriors & Commoners model pack from Frogames and the pack contains (among other formats) two animated models and several non-animated objects (axe, shield, pilosities, etc.) in MilkShape3D format. I looked at the official "MilkShape 3D Viewer v2.0" (msViewer2.zip at http://www.chumba.ch/chumbalum-soft/ms3d/download.html) source code and implemented loading the model, calculating the joint matrices and everything looks fine. In the model there are several joints that are designated as the "mount points" for the static objects like axe and shield. I now want to "put" the axe into the hand of the animated model, and I couldn't quite figure out how. I put the animated vertices in a VBO that gets updated every frame (I know I should do this with a shader, but I didn't have time to do this yet). I put the static vertices in another VBO that I want to keep static and not updated every frame. I now tried to render the animated vertices first, then use the joint matrix for the "mount joint" to calculate the location of the static object. I tried many things, and what about seems to be right is to transpose the joint matrix, then use glMatrixMult() to transform the modelview matrix. For some objects like the axe this is working, but not for others, e.g. the pilosities. Now my question: How is this generally implemented when using bone/joint models, and especially with MilkShape3D models? Am I on the right track?

  Read the article

• Mobile Web Framework that will only control rendering and page transitions

  - by rlemon

  I have been using jQueryMobile for a bit now, and there are some things I like about it and others I do not. First I will give a bit of background. I have a light weight mobile application that has a few configurations and 6 pages. Ideally I Would like to load all pages into the DOM (they interact with each other quite often and pages will be switched in the same frequency). The application will post for some JSON every n seconds and refresh the values on the page (yes it is primarily a information display app). with the jQuery Mobile framework the only real thing I like is how easy it is to have a standardized UI a crossed all devices and browsers, I'm really not using too much else out of the framework other than the basic page navigation (if you are familiar with the framework; a bare-bone multi-page design is all i need). Why I want to step away from jQueryMobile is how weighty it is. Not only do you need to include the mobile library, but also the base jQuery libraries. This I do not like because I'm not using jQuery anywhere else on the site. Any suggestions on light-weight mobile frameworks that have a similar rendering as jQueryMobile?

  Read the article

• General List of Common Programming Errors

  - by javamonkey79

  As one journey's from apprentice to journeyman to master I've noticed that one accumulates a list of best practices for things they've been bitten by. Personally, I write most of my stuff in java & SQL so my list tends to be slated towards them. I've accumulated the following: When doing list removal, always reverse iterate Avoid adding items to a list you are currently iterating on Watch out for NullPointerExceptions Now, I know there are language specific "common errors" links out there like this one. And I'm also aware of the pragmatic programmer tips, Martin Fowler's "code smells". Does anyone know of any good lists out there of things like I've listed above (re: list removal, adding items, etc). My guess is that there are some good QA folks out there that can probably throw me a bone here. I'm not looking for things the compiler can catch - I'm looking for common things that cause bugs. In the event that there isn't a list out there already then I welcome posting your own findings here. Thanks in advance!

  Read the article

• CodePlex Daily Summary for Tuesday, October 25, 2011

  CodePlex Daily Summary for Tuesday, October 25, 2011Popular ReleasesScrum Task Board Card Creator: TaskCardCreator 2.5.0.0: What's New: UX improvement: Loading of work items is done in a worker thread Use memory, not the file system, when creating reports for better performance UI improvement: Better parent/child relation between the TeamProjectPicker and MainWindow Microsoft Visual Studio Scrum 1.0: Dedicated Impediment card added Supported Templates: Microsoft Visual Studio Scrum 1.0 Product Backlog Item, Task, Impediment, and Bug MSF for Agile Software Development v5.0 User Story, Task, and BugSubtitleTools: SubtitleTools 1.9: - Improved: Some DVD players need a mandatory UTF8-BOM (http://en.wikipedia.org/wiki/Byteordermark) at the beginning of the file to show RTL subtitles correctly.THE NVL Maker: The NVL Maker Ver 3.06: 3.06 ??? ??3.04，???CG MODE?? ??3.05—— ??????????????????????????????? ?????????config.tjs????????（??????????????????????????） ????config.tjs???，????????????，????????????Config.tjs。（???????，?????????，???KAGConfig??） ???????“????”??，??????????????????（Data） ??????????????????? ???????????，????????，??????????? ?fadeoutbgm?????????，???????????????，?????????? ????????，???“??????”??。（??????????macro_edu.ks??） ????????，????????A??????，???“??????”。 ?????????????，???????B??????，???“...Xomega Framework: Xomega.Framework 1.2: Release 1.2 of Xomega Framework refactors projects to allow generating assemblies for different target frameworks and profiles and allows deploying it as a NuGet package. It also includes some small fixes to the service and presentation layer classes.People's Note: People's Note 0.31: Added note tag editing. Changed note edit conflict resolution to keep the latest version. To install: copy the appropriate CAB file onto your WM device and run it.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...xUnit.net Contrib: xunitcontrib-resharper 0.4.4 (dotCover): xunitcontrib release 0.4.4 (ReSharper runner) This release provides a test runner plugin for Resharper 6.0 RTM, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release addresses the following issues:Support for dotCover code coverage 4132 Note that this build work against ALL VERSIONS of xunit. The files are compiled against xunit.dll 1.8 - DO NOT REPLACE THIS FILE. Thanks to xunit's version independent runner system, this package can r...BookShop: BookShop: BookShop WP7 clientRibbon Editor for Microsoft Dynamics CRM 2011: Ribbon Editor (0.1.2122.266): Added CodePlex and PayPal links New icon Bug fix: can't connect to an IFD deployment when the discovery service url has been customizedDotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...Media Companion: MC 3.419b Weekly: A couple of minor bug fixes, but the important fix in this release is to tackle the extremely long load times for users with large TV collections (issue #130). A note has been provided by developer Playos: "One final note, you will have to suffer one final long load and then it should be fixed... alternatively you can delete the TvCache.xml and rebuild your library... The fix was to include the file extension so it doesn't have to look for the video file (checking to see if a file exists is a...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.GridLibre para Visual FoxPro: GridLibre para Visual FoxPro v3.5: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.WiX Toolset: WiX v3.6 Beta: First beta release of WiX v3.6. The primary focus is on Burn but there are also many small bug fixes to the core toolset. For more information see: http://robmensching.com/blog/posts/2011/10/24/WiX-v3.6-Beta-releasedUmbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...Vkontakte WP: Vkontakte: source codeWay2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.New ProjectsApiDiff.Net: API Difference/Reporting project written in C# using the wonderful Cecil engine (http://www.mono-project.com/Cecil) to show differences between versions of a public API. Something like the unsupported MS tool "libcheck"Aspect Oriented Programming with .Net: Demo project using PostSharp for AOP in .Net.CCBBAA: CCBBAACdf.Iris.MiniProjetCalculateur: Application Client / Serveur calculateur en langage CCmjSiverlight: a silverlight libraryCSharpKaartSpel: Super Kaart Spel.Developer Team Article System Management: Developer Team Article System Management Makes it easier for Authors to publish their articles . It developed in VB.NET .DirectoryMonitor: DirectoryMonitorDNN Administrador de Tareas: Un Proyecto de codigo abierto Domek: Taki sobie domekEDXGraphics: This is Edward(Shiqiu) Liu's personal code repository. Projects here are primarily about Graphics, AI and Algorithms. For more introduction, please visit [url:www.edxgraphics.com] Enterprise SSIS Framework: The Enterprise SSIS Framework is a project intended to simplify the management of an organization’s administration and ETL assets by abstracting the coordination and control flow into metadata. This project consists of the four parts: - Core SSIS Packages: A set of packages that are responsible for workflow within the framework - SQL Server 2008 DB: Holds all the metadata necessary to drive the application - Administration App: A web-based front end to facilitate managing assets running ...FIM Task Sequencer "RunJob": Runjob is a simple batch controller for FIM (MIIS and ILM) for starting and monitoring the execution of FIM Run Profiles that allows for complex (looping and branching) sequences to be put together with a simple XML 'task' file. Key features include: * Works with MIIS / ILM / FIM * Optionally Connects to the SQL database to verify that run profiles exist * Can execute arbitrary tasks via a command line. * Based on the results of command line or previous run history can loop and jump ...Ham Bone Soup amateur radio software and electronic log: Ham Bone Soup is a open source software written for satisfying the needs of Amateur Radio operators. The central feature is an especially flexible logging system for acommodating contests and general purpose logs, but will grow to include many other vital Amateur radio features. It doesn't do anything yet, we are just geting started.H? th?ng qu?n lý chi tiêu - windows phone: H? th?ng qu?n lý chi tiêu - windows phoneJavascript Editor for SharePoint: Javascript Editor for SharePoint is a lightweight, in-browser editor that lets you quickly prototype and test custom javascript code in SharePointLegoWeb: Open source Web CMS base on ASP.NET Webparts + MARCXML metadata: LegoWeb is an open source web content management solution developed base on combination of ASP.NET 2.0 Webparts and MARCXML Metadata. It is very simple and very flexible. LuaXna: An simple engine that allow to devolop in LUA for XNA. It have logging feature and cycles.Manager Game: Student project for game developement course. Using XNA 4.0 for Windows platform.Metroed: A Metro version of the PhoneyTools (a WP7 toolkit) for use with C#/VB WinRT applications.My Masters Sample Project for Sharepoint 2010: The feature stabling example project which is provide to deploy custom master page to personel sites on Sharepoint 2010 The solution is anwering fallowing questions : * How to deploy a custom master page ? * How to customize a masterpage ? * How to attach custom master page to personal sites using stabling feature ? NDepend TFS 2010 integration: NDepend TFS 2010 integration provides build activities, a build report customization addin, and extends the TFS Warehouse in order to leverage NDepend quality statistics for your projects. Open Source Renderer: Open Source RendererPearTunes: Peartunes is a university project.Plugin Framework Web: Lighweight plugin framework for web applicationsQTP TFS Generic Test Integration: In Microsoft Visual Studio 2010 there is a Generic Test type that allows you to integrate with automation tools like QTP. I have created a pretty simple solution that allows you to use your existing QTP automation scripts within the Microsoft Visual Studio testing framework and here's a sample below. The key part of this solution is transforming HP's QTP format to Microsoft’s Generic Test format so that you can publish the results to TFS. The added benefit of this integration is that you c...RequiemDream: the project for manage workflow records reexecute to helping developers for debugging.Rift Addon Studio 2010: Rift AddOn Studio (AOS) is an open source development environment designed to bring a Visual Studio-like experience to building Rift AddOns. For more information on exactly what AOS does, check out the list of features below. Small Database Tools: This is a project for me to create small tools I created for database related functions.SQL Azure Membership, Profile, Role provider starter kit for MVC3 project: When you use out of box MVC 3 site template the Membership, Profile and Role provider DB is created as attached MDF file by the name AspNetDB.mdf. This project has needed steps to easily migrate this DB into SQL Azure. This is a complete MVC3 Starter site project and could be used for your next 'Big Thing' as soon as properly setup. Enjoy :)SQL Server BareMetal Hands-on-Labs: The SQL Server BareMetal Hands-on-Labs project allows you to build a SQL Server Hands-on-Lab Enviroment from scratch, using Windows Server 2008 R2 SP1 Hyper-V. State Theater Website: Building a website designed to provide information about live theater throughout a state. Basically, it a port of NJTheater.com from classic ASP to Asp.Net making it customizable to any state along the way.Static web generator: Zoltar let you generate your website (blog, personl website,etc) from a set of md files. Ukulele Chord Finder: Ukulele Chord FinderUser Profile Cleaner: This application allows you to manage via GUI or command line user profiles, removed the profiles no longer used by a number of days. The application allows you to set a list of profiles that can be excluded from deletion. Virtual Visit: This project have made the virtual visite for your siteWP7 Open source project collection by eLite: ??Windows Phone????????zebrawebservice: ??AWB，??OPS??

  Read the article

• Just a general THANK YOU to EVERYONE. [closed]

  - by ajax81

  Hi All, I really just wanted to thank everybody that participates in the stackoverflow community. On more than one occasion, your minds have saved me from soul-eating project managers and career-ending deadlines. The commendable awareness exhibited by contributors that their answers are studied/used as learning material by millions of developers all over the world has created a regulated trust that seemingly keeps the nonsense (and egos) at the bottom of the barrel and out of the way. As an up-and-coming developer with so much to learn, I am grateful for each and every one of their patient contributions. I wish I could come up with a catchy/funny sign-off that makes everybody feel good, but I lack the funny bone that so many of the people on this site seem to have been born with. Instead, I can only leave my gratitude and a promise that as long as the community stays this great, I'll stay an avid reader...and one day be experienced enough to carry the torch of contribution. Sincerely, Daniel the Intern

  Read the article

• How to play Sound and Animations in MVVM

  - by user275561

  I have read alot of blogs about the best way to play sound/Animation but if possible I would like to see a simplified example on how this is done so I understand better. So to my understanding in MVVM The View--Sound and Animation The ViewModel--If some value is true, i would like to play the Sound and Animation on the view. Now How would I go about doing this. I was told to use interfaces like ISoundService and IAnimationService. Implement in the View and then do what? If possible, a workable bare bone example will help alot.

  Read the article

• Hierarchical animations in DirectX and handling seperate animations on the same mesh?

  - by meds

  I have a hierarchical animated model in DirectX which loads and animates based on the following DirectX sample: http://msdn.microsoft.com/en-us/library/ee418677%28VS.85%29.aspx As good as the sample is it does not really go into some of the details of animation that I'd like. For example, if I have a mesh which has a running animation and a throwing animation as seperate animation sets how can I get the throwing animation to occur for bones above the hip and the walking animation to occur for bones underneath the hip? Also if I wanted to for example have the person lean left or right would I simply have to find the bone for the hip and multiplay a rotation matrix by its matrix? In this case I think the matrix is m_amxBoneOffsets?

  Read the article

• SFML 2.0 crashes anytime a method is called

  - by Ken

  This code generates an exception: #include <SFML/Graphics.hpp> #include <SFML/Window.hpp> #include <SFML/System.hpp> int main() { sf::Clock clock; clock.getElapsedTime(); return 0; } However, this doesn't crash: #include <SFML/Graphics.hpp> #include <SFML/Window.hpp> #include <SFML/System.hpp> int main() { sf::Clock clock; return 0; } I'm using SFML 2.0, Windows 7, MinGW 4.70 (Code::Blocks). I don't know why, I followed all instructions to link the libraries and nothing seems to be working. I might be missing something simple through my anger (I've been trying to run sample code for a week, nothing has been working), so can anybody throw me a bone?

  Read the article

• accessing required modules from other modules

  - by john smith

  I have a bare-bone express application, exactly the one that is created with the express command. I have installed socket.io and attached it to my server, like this: var app = express(), server = http.createServer(app), io = io.listen(server); server.listen(8000); Now, I also have the routes files, which is called like this: app.get('/', routes.index); Inside this module I have the following function: exports.index = function(req, res){ socket.emit('news', { message: "foo" }); }; This obviously leads to a 500 reference error, because the routes file is an exportable module, and obviously has no idea what the socket is, as it is located in the app.js file. Is there a way I can access this socket object from this, or any other file? Please note that it is attached to the express generated app. extra: what about getting/setting session data? Thanks in advance.

  Read the article

• What are good resources to learn Coldfusion for a job application...

  - by NoMoreZealots

  The job title is "ColdFusion Developer." I have bit's HTML and Javascripting experience, but mostly have worked in the "harder" languages such as C and C++ with occational flurries of assembly. I'm currently employeed, but in the current job climate I figure it can't hurt to be looking around and applying for other positions. Plus according to the friend who sent me the job posting, it is suppose to pay "very well." They left my office to work for this company themself so I figure it's a reasonable evaluation of the company. I don't know if there are any free tools that I could use to get my feet wet and bone up for an interview, or what sort of literature is decent for the ColdFusion. Plus any ideas on how to tune a resume for it would also be helpful.

  Read the article

• Optimizing MySQL statement with lot of count(row) an sum(row+row2)...

  - by Zombies

  I need to use InnoDB storage engine on a table with about 1mil or so records in it at any given time. It has records being inserted to it at a very fast rate, which are then dropped within a few days, maybe a week. The ping table has about a million rows, whereas the website table only about 10,000. My statement is this: select url from website ws, ping pi where ws.idproxy = pi.idproxy and pi.entrytime > curdate() - 3 and contentping+tcpping is not null group by url having sum(contentping+tcpping)/(count(*)-count(errortype)) < 500 and count(*) > 3 and count(errortype)/count(*) < .15 order by sum(contentping+tcpping)/(count(*)-count(errortype)) asc; I added an index on entrytime, yet no dice. Can anyone throw me a bone as to what I should consider to look into for basic optimization of this query. The result set is only like 200 rows, so I'm not getting killed there.

  Read the article

• menuitem id in xml format can't be an integer? huh. really?

  - by misbell

  ok, in menu.add, you add an integer menuitem id. But when you specify the menu in xml, @+id can't take an integer, so you can't test the id for the menu item as an integer in a switch statement. What obvious thing am I missing, because surely an inconsistency this bone-stupid couldn't have passed muster with all those wonderful geniuses at Google. on top of that, when I give the menu item a name like "@+id/myMenuItem", item.getItemId() returns an integer, a long one, which I guess is a representation of the hex pointer. M

  Read the article

• testing the controller in asp.net mvc

  - by csetzkorn

  Hi, I would like to test the validation of submitted DTO. This is the bare bone of a controller create action: [AcceptVerbs(HttpVerbs.Post)] public RedirectToRouteResult Create(SomeDTO SomeDTO) { SomeObject SomeObject = null; try { SomeObject = this.RepositoryService.getSomeObjectRepository().Create(SomeDTO, this.RepositoryService); } catch (BrokenRulesException ex) { ex.AddModelStateErrors(ModelState, "Model"); } catch (Exception e) { ModelState.AddModelError("Exception", e.Message); } TempData["ViewData"] = ViewData; TempData["SomeDTO "] = SomeDTO; return ModelState.IsValid ? RedirectToAction("SomeObjectDetail", new { Id = SomeObject.Id }) : RedirectToAction("Form"); } The mechanics , although not relevant, is as follows: I have a strongly typed view = form which submits a dto to this action which either returns the form or the details page of the created object. I would like to unit test whether the Model contains certain key/errorMessage combinations given some invalid dto. Did someone do similar stuff? Any pointers would be very much appreciated. Thanks. Best wishes, Christian

  Read the article

• C# : Redirect console application output : How to flush the output?

  - by user93422

  I am spawning external console application and use async output redirect. as shown in this SO post My problem is it seems that the spawned process needs to produce certain amount of output before I get the OutputDataReceived event notification. I want to receive the OutputDataReceived event as soon as possible. I have a bare-bones redirecting application, and here are some observations: 1. When I call a simple 'while(true) print("X");' console application (C#) I receive output event immediately. 2. When I call a 3d party app I am trying to wrap from the command line I see the line-by-line output. 3. When I call that 3d party app from my bare-bone wrapper (see 1) - the output comes in chunks (about one page size). What happens inside that app? FYI: The app in question is a "USBee DX Data Exctarctor (Async bus) v1.0".

  Read the article

• C# Can you extract dll version numbers from bundeled dlls.

  - by priehl

  I need to bone up on my CLR compiling knowledge, so i'm going to speak in generalities... Appologies if I'm not being specific enough. I'm working on an application that references a COM Library dll which has a number of dlls rolled into it. My question is, is it possible using Reflection to get a reference to the sub dll's assembly, namely to obtain the version number? Or, if this question makes no sense, i'll try to rephrase. Thanks in advance.

  Read the article

• What Problems Are Better Solved By SOAP Over REST?

  In the battle for web service supremacy SOAP and REST have been battling for years. In my personal opinion this debate should have never existed. Yes, both forms can be used to create an interactive web service, but each form of a service was developed independent of each other to solve two different yet similar problems. Based my research and experience I would have to say that REST should be the preferred web service methodology and SOAP should only be used in specific situations. Note, I did not say that I was against SOAP, and in fact I actually like to use SOAP when it is needed. Criteria for using SOAP: Does the service need a guaranteed level of reliability and security? Did the provider and consumer of the service agreed on a standardized data exchange format? Does the service need data context and state management? If you answer yes to any of these questions, then you may want to consider SOAP as the format for the web service. Another way to look at the relationship between REST and SOAP is to look at the medical field.  For most things a general doctor or you family health care provider can acceptably treat most conditions from the case of a common cold to a broken bone. A general doctor more aligns with REST in my opinion because for most service requirements REST fulfills a projects needs, but what happens if you need more of an advanced examination, you would go to a specialist. A specialist would already have experience dealing with specific issues that you are experiencing giving them specific context to how best treat you going forward. SOAP acts more like a specialist doctor giving that they understand the context of an issue and can treat it based on the state of other patients they have already treated. An example of where I would use SOAP over REST in real life would be a single sign-on application. I n these cases I need to check validate a username and password for authentication and authorization of a web page request. This service would need to maintain state while it authenticated a user and while it validated access to a web page on a subsequent request. This service must process every request for access and not allow caching to ensure that every request is processed and the appropriate users are allowed to view selected web pages. References: Rozlog, M. (2010). REST and SOAP: When Should I Use Each (or Both)? Retrieved 11 20, 2011, from Infoq.com: http://www.infoq.com/articles/rest-soap-when-to-use-each

  Read the article

• Dynamic character animation - Using the physics engine or not

  - by Lex Webb

  I'm planning on building a dynamic reactant animation engine for the characters in my 2D Game. I have already built templates for a skeleton based animation system using key frames and interpolation to specify a limbs position at any given moment in time. I am using Farseer physics (an extension of Box2D) in Monogame/XNA in C# My real question lies in how i go about tying this character animation into the physics engine. I have two options: Moving limbs using physics engine - applying a interpolated force to each limb (dynamic body) in order to attempt to get it to its position as donated by the skeleton animation. Moving limbs by simply changing the position of a fixed body - Updating the new position of each limb manually, attempting to take into account physics collisions. Then stepping the physics after the animation to allow for environment interaction. Each of these methods have their distinct advantages and disadvantages. Physics based movement Advantages: Possibly more natural/realistic movement Better interaction with game objects as force applying to objects colliding with characters would be calculated for me. No need to convert to dynamic bodies when reacting to projectiles/death/fighting. Disadvantages: Possible difficulty in calculating correct amount of force to move a limb a certain distance at a constant rate. Underlying character balance system would need to be created that would need to be robust enough to prevent characters falling over at the touch of a feather. Added code complexity and processing time for the above. Static Object movement Advantages: Easy to interpolate movement of limbs between game steps Moving limbs is as simple as applying a rotation to the skeleton bone. Greater control over limbs, wont need to worry about characters falling over as all animation would be pre-defined. Disadvantages: Possible unnatural movement (Depends entirely on my animation skills!) Bad physics collision reactions with physics engine (Dynamic bodies simply slide out of the way of static objects) Need to calculate collisions with physics objects and my limbs myself and apply directional forces to them. Hard to account for slopes/stairs/non standard planes when animating walking/running animations. Need to convert objects to dynamic when reacting to projectile/fighting/death physics objects. The Question! As you can see, i have thought about this extensively, i have also had Google into physics based animation and have found mostly dissertation papers! Which is filling me with sense that it may a lot more advanced than my mathematics skills. My question is mostly subjective based on my findings above/any experience you may have: Which of the above methods should i use when creating my game? I am willing to spend the time to get a physics solution working if you think it would be possible. In the end i want to provide the most satisfying experience for the gamer, as well as a robust and dynamic system i can use to animate pretty much anything i need.

  Read the article

• How do I apply skeletal animation from a .x (Direct X) file?

  - by Byte56

  Using the .x format to export a model from Blender, I can load a mesh, armature and animation. I have no problems generating the mesh and viewing models in game. Additionally, I have animations and the armature properly loaded into appropriate data structures. My problem is properly applying the animation to the models. I have the framework for applying the models and the code for selecting animations and stepping through frames. From what I understand, the AnimationKeys inside the AnimationSet supplies the transformations to transform the bind pose to the pose in the animated frame. As small example: Animation { {Armature_001_Bone} AnimationKey { 2; //Position 121; //number of frames 0;3; 0.000000, 0.000000, 0.000000;;, 1;3; 0.000000, 0.000000, 0.005524;;, 2;3; 0.000000, 0.000000, 0.022217;;, ... } AnimationKey { 0; //Quaternion Rotation 121; 0;4; -0.707107, 0.707107, 0.000000, 0.000000;;, 1;4; -0.697332, 0.697332, 0.015710, 0.015710;;, 2;4; -0.684805, 0.684805, 0.035442, 0.035442;;, ... } AnimationKey { 1; //Scale 121; 0;3; 1.000000, 1.000000, 1.000000;;, 1;3; 1.000000, 1.000000, 1.000000;;, 2;3; 1.000000, 1.000000, 1.000000;;, ... } } So, to apply frame 2, I would take the position, rotation and scale from frame 2, create a transformation matrix (call it Transform_A) from them and apply that matrix the vertices controlled by Armature_001_Bone at their weights. So I'd stuff TransformA into my shader and transform the vertex. Something like: vertexPos = vertexPos * bones[ int(bfs_BoneIndices.x) ] * bfs_BoneWeights.x; Where bfs_BoneIndices and bfs_BoneWeights are values specific to the current vertex. When loading in the mesh vertices, I transform them by the rootTransform and the meshTransform. This ensures they're oriented and scaled correctly for viewing the bind pose. The problem is when I create that transformation matrix (using the position, rotation and scale from the animation), it doesn't properly transform the vertex. There's likely more to it than just using the animation data. I also tried applying the bone transform hierarchies, still no dice. Basically I end up with some twisted models. It should also be noted that I'm working in openGL, so any matrix transposes that might need to be applied should be considered. What data do I need and how do I combine it for applying .x animations to models?

  Read the article

• tftpd-hpa service must be restarted before working after fresh boot

  - by Steve

  I'm running Ubuntu 12.04 inside a VirtualBox VM. I've installed tftpd-hpa so I can boot an embedded Linux device via tftp. My problem is that after a fresh boot of the VM, tftpd doesn't seem to work until I restart the service, after which is works great until the system is rebooted. The transcript below should explain the situation. EDIT: After the fresh boot, I execute netstat -a | grep tftp and find nothing. After restarting the service, the same command returns udp 0 0 *:tftp *:* (whitespace removed). I think this might be the key to the problem, I'm just not sure how to resolve it. I don't think it's related to this specific issue, but I had another problem with tftpd that was asked and answered in this question. steve@steve-VirtualBox:~$ cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" steve@steve-VirtualBox:~$ ls -l /var/lib/tftpboot total 8204 -rw-r--r-- 1 root root 34352 May 28 08:22 am335x-boneblack.dtb -rw-r--r-- 1 root root 33206 May 28 08:22 am335x-bone.dtb -rw-r--r-- 1 root root 41564 May 28 08:22 am335x-evm.dtb -rw-r--r-- 1 root root 38048 May 28 08:22 am335x-evmsk.dtb -rwxr-xr-x 1 root root 4117904 May 20 09:39 zImage -rw-r--r-- 1 root root 4117616 May 28 08:22 zImage-am335x-evm.bin steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Transfer timed out. tftp> quit steve@steve-VirtualBox:~$ sudo service tftpd-hpa restart [sudo] password for steve: tftpd-hpa stop/waiting tftpd-hpa start/running, process 2106 steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Received 4143798 bytes in 1.4 seconds tftp> quit steve@steve-VirtualBox:~$

  Read the article

• Problem restoring from tar backup: why are there /dev/disk/by-id/ symlinks and how can I avoid them?

  - by SK.

  Hello, I'm trying to make a bare-bone backup system with the most basic tools available on openSUSE 11.3 (in this case: bash, fdisk, tar & grub legacy) Here's the workflow for my scripts: backup.sh: (Run from external system, e.g. LiveCD) make an fdisk script ($fscript) from fdisk -l's output [works] mount the partitions from the system's fstab [works] tar the crucial stuff in file.tgz [works] restore.sh: (Run from external system, e.g. LiveCD) run fdisk $dest < $fscript to restore partitioning [works] format and mount partitions from system's fstab [fails] extract from file.tgz [works when mounting manually] restore grub [fails] I have recently noticed that openSUSE (though I'm sure it has nothing to do with the distro) has different output in /etc/fstab and /boot/grub/menu.lst, more precisely the partition name is for example "/dev/disk/by-id/numbers-brandname-morenumbers-part2" instead of "/dev/sda2" -- but it basically is a simple symlink. My questions about this: what is the point of such symlinks, especially if we're restoring on a different disk? is there a way to cleanly prevent the creation of those symlinks and use the "true" /dev/sdx everywhere instead? if the previous is no, do you know a way to replace those symlinks on the fly in a text file? I tried this script but only works if the file starts with the symlink description (case of fstab, not menu.lst): ### search and replace /dev/disk/by-id/... to /dev/sdx while read oldVolume rest; do # get first element, ignore rest of line if [[ "$oldVolume" =~ ^/dev/disk/by-id/.*(-part[0-9]*$)? ]]; then newVolume=$(readlink $oldVolume) # replace pointer by pointee, returns "../../sdx" echo /dev/${newVolume##*/} $rest >> TMP # format to "/dev/sdx", write line else echo $oldVolume $rest >> TMP # nothing to do fi done < $file mv -f TMP $file # save changes I've had trouble finding a solution to this on google so I was hoping some of the members here could help me. Thank you.

  Read the article

• Recover NTFS data from a ZFS pool that was exposed as an iSCSI target

  - by David

  This was me being stupid and the data is by no means critical and is now a learning experience first, time saver second. I set up a 100GB iSCSI target via the bare bone instructions in napp-it. It's a volume LU. I then had my Windows 7 machine connect to the iSCSI target, formatted it to NTFS, and tested the performance of it with some large iso file transfers. I then unmapped the drive, reconnected to the target, and was forced to format to NTFS again. It was then I realized the files I had transferred only existed on the iSCSI target. I threw a little fit and then went about my business. When I was cleaning up my experiment I noticed in this screen: http://imgur.com/1xlcu.jpg That is my experimental target tank/iSCSI and it still has a lot of data in it. Assuming my isos are still in this pool how would I go about recovering them? While writing this I used GetDataBackup for NTFS from www.runtime.org. And while it found two previous NTFS partitions there was no data.

  Read the article

• Floats will not align, stay staggered, can't find a solution?

  - by Sarah Proper

  What I am trying to do is build a multi column layout. The main two sections are divided 2/3 to 1/3 and inside the 2/3 column is divided 2/3 1/3 as well. My problem is that my floats will not align nicely with each other, choosing instead to stagger like stairs. I have tried declaring the widths smaller, floating them individually, including in the float sections display:block,inline, or inline-block and nothing seems to be working. I am getting really frustrated and would appreciate any help! Thanks! <div class="wrapper"> <div class="width50" style="float:left;"> <h1>Our Mission:</h1> <p> Bacon ipsum dolor sit amet swine spare ribs pork meatloaf pancetta filet mignon. Rump frankfurter pork belly prosciutto beef boudin andouille pig pork chop meatball ham drumstick filet mignon. Strip steak flank shank pig, tongue tri-tip jowl leberkas sirloin brisket t-bone. Ground round spare ribs salami capicola filet mignon. Capicola turkey t-bone corned beef sausage ham hock. Corned beef capicola leberkas pork chop, swine pastrami drumstick. Frankfurter fatback bacon jowl short loin, jerky pancetta bresaola corned beef shoulder drumstick ball tip tri-tip.</p> <div class="width50 float-left"> <img src="@Url.StaticContent(Links.Content.images.map_homepage_png)" alt="Map" /> </div> <div class="width33 float-right"> <img src="@Url.StaticContent(Links.Content.images.address_line_text_png)" alt="addressline" /> <br /> <h3>address</h3> <b>405 Empire Boulevard<br /> Rochester, NY 14609 </b> </div> </div> <div class="width33" style="float:right;"> <h1>Events</h1> <ul class="events"> <li> <h2>Fall Volunteer Festival</h2> <p> <b>october 6<br /> 10 am to 3pm </b> </p> <p> come to our town location for some fun activities for family and friends! </p> </li> <li> <h2>Fall Volunteer Festival</h2> <p> <b>october 6<br /> 10 am to 3pm </b> </p> <p> come to our town location for some fun activities for family and friends! </p> </li> <li> <h2>Fall Volunteer Festival</h2> <p> <b>october 6<br /> 10 am to 3pm </b> </p> <p> come to our town location for some fun activities for family and friends! </p> </li> </ul> </div> </div> </div> and the css: .clearfix:before, .clearfix:after, .grid-block:before, .grid-block:after, .deepest:before, .deepest:after { content: ""; display: table; } .clearfix:after, .grid-block:after, .deepest:after { clear: both; } .grid-box { float: left; } /* Grid Units */ .width16 { width: 16.666%; } .width20 { width: 20%; } .width25 { width: 25%; } .width33 { width: 39.333%; } .width40 { width: 40%; } .width50 { width: 50%; } .width60 { width: 60%; } .width66 { width: 66.666%; } .width75 { width: 75%; } .width80 { width: 80%; } .width100 { width: 100%; } .width16, .width20, .width25, .width33, .width40, .width50, .width60, .width66, .width75, .width80, .width100 { -moz-box-sizing: border-box; -webkit-box-sizing: border-box; box-sizing: border-box; padding: 5px 10px 5px 10px; } /* Create new Block Formatting Contexts */ .bfc-o { overflow: hidden; } .bfc-f { -moz-box-sizing: border-box; -webkit-box-sizing: border-box; box-sizing: border-box; width: 100%; float: left; } /* Align Boxes */ .float-left { float: left; } .float-right { float: right; } /* Grid Gutter */ .grid-gutter.grid-block { margin: 0 -15px; } .grid-gutter > .grid-box > * { margin: 0 15px; } .grid-gutter > .grid-box > * > :first-child { margin-top: 0; } .grid-gutter > .grid-box > * > :last-child { margin-bottom: 0; } /* Layout Defaults --------------------------------------------------------------------------------------- -------------*/ /* Center Page */ .wrapper { -moz-box-sizing: border-box; -webkit-box-sizing: border-box; box-sizing: border-box; margin: auto; } /* Header */ #header { position: relative; padding-top: 10px; } #toolbar .float-left .module, #toolbar .float-left > time { margin: 0 15px 0 0; float: left; } #toolbar .float-right .module { margin: 0 0 0 15px; float: right; } #headerbar .module { max-width: 300px; margin-right: 0; float: right; } #logo, #logo > img, #menu { float: left; } #search { float: right; } #banner { position: absolute; top: 0; right: -200px; } /* Footer */ #footer { position: relative; text-align: center; } /* Absolute */ #absolute { position: absolute; z-index: 15; width: 100%; }

  Read the article

• Dark Sun Dispatch 001

  - by Chris Williams

  If you aren't into tabletop (aka pen & paper) RPGs, you might as well click to the next post now... Still here? Awesome. I've recently started running a new D&D 4.0 Dark Sun campaign. If you don't know anything about Dark Sun, here's a quick intro: The campaign take place on the world of Athas, formerly a lush green world that is now a desert wasteland. Forests are rare in the extreme, as is water and metal. Coins are made of ceramic and weapons are often made of hardened wood, bone or obsidian. The green age of Athas was centuries ago and the current state was brought about through the reckless use of sorcerous magic. (In this world, you can augment spells by drawing on the life force of the world & people around you. This is called defiling. Preserving magic draws upon the casters life force and does not damage the surrounding world, but it isn't as powerful.) Humans are pretty much unchanged, but the traditional fantasy races have changed quite a bit. Elves don't live in the forest, they are shifty and untrustworthy desert traders known for their ability to run long distances through the wastes. Halflings are not short, fat, pleasant little riverside people. Instead they are bloodthirsty feral cannibals that roam the few remaining forests and ride reptilians beasts akin to raptors. Gnomes are extinct, as are orcs. Dwarves are mostly farmers and gladiators, and live out in the sun instead of staying under the mountains. Goliaths are half-giants, not known for their intellect. Muls are a Dwarf & Human crossbreed that displays the best traits of both races (human height and dwarven stoutness.) Thri-Kreen are sentient mantis people that are extremely fast. Most of the same character classes are available, with a few new twists. There are no divine characters (such as Priests, Paladins, etc) because the gods are gone. Nobody alive today can remember a time when they were still around. Instead, some folks worship the elemental forces (although they don't give out spells.) The cities are all ruled by Sorcerer King tyrants (except one city: Tyr) who are hundreds of years old and still practice defiling magic whenever they please. Serving the Sorcerer Kings are the Templars, who are also defilers and psionicists. Crossing them is as bad, in many cases, as crossing the Kings themselves. Between the cities you have small towns and trading outposts, and mostly barren desert with sometimes 4-5 days on foot between towns and the nearest oasis. Being caught out in the desert without adequate supplies and protection from the elements is pretty much a death sentence for even the toughest heroes. When you add in the natural (and unnatural) predators that roam the wastes, often in packs, most people don't last long alone. In this campaign, the adventure begins in the (small) trading fortress of Altaruk, a couple weeks walking distance from the newly freed city of Tyr. A caravan carrying trade goods from Altaruk has not made it to Tyr and the local merchant house has dispatched the heroes to find out what happened and to retrieve the goods (and drivers) if possible. The unlikely heroes consist of a human shaman, a thri-kreen monk, a human wizard, a kenku assassin and a (void aspect) genasi swordmage. Gathering up supplies and a little liquid courage, they set out into the desert and manage to find the northbound tracks of the wagon. Shortly after finding the tracks, they are ambushed by a pack of silt-runners (small lizard people with very large teeth and poisoned pointy spears.) The party makes short work of the creatures, taking a few minor wounds in the process. Proceeding onward without resting, they find the remains of the wagon and manage to sneak up on a pack of Kruthiks picking through the rubble and spilled goods. Unfortunately, they failed to take advantage of the opportunity and had a hard fight ahead of them. The party defeated the kruthiks, but took heavy damage (and almost lost a couple of their own) in the process. Once the kruthiks were dispatched, they followed a set of tracks further north to a ruined tower...

  Read the article

• Child transforms problem when loading 3DS models using assimp

  - by MhdSyrwan

  I'm trying to load a textured 3d model into my scene using assimp model loader. The problem is that child meshes are not situated correctly (they don't have the correct transformations). In brief: all the mTansform matrices are identity matrices, why would that be? I'm using this code to render the model: void recursive_render (const struct aiScene *sc, const struct aiNode* nd, float scale) { unsigned int i; unsigned int n=0, t; aiMatrix4x4 m = nd->mTransformation; m.Scaling(aiVector3D(scale, scale, scale), m); // update transform m.Transpose(); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if (mesh->HasBones()){ printf("model has bones"); abort(); } if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } if(mesh->mColors[0] != NULL) { glEnable(GL_COLOR_MATERIAL); } else { glDisable(GL_COLOR_MATERIAL); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++)// go through all vertices in face { int vertexIndex = face->mIndices[i];// get group index for current index if(mesh->mColors[0] != NULL) Color4f(&mesh->mColors[0][vertexIndex]); if(mesh->mNormals != NULL) if(mesh->HasTextureCoords(0))//HasTextureCoords(texture_coordinates_set) { glTexCoord2f(mesh->mTextureCoords[0][vertexIndex].x, 1 - mesh->mTextureCoords[0][vertexIndex].y); //mTextureCoords[channel][vertex] } glNormal3fv(&mesh->mNormals[vertexIndex].x); glVertex3fv(&mesh->mVertices[vertexIndex].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n], scale); } glPopMatrix(); } What's the problem in my code ? I've added some code to abort the program if there's any bone in the meshes, but the program doesn't abort, this means : no bones, is that normal? if (mesh->HasBones()){ printf("model has bones"); abort(); } Note: I am using openGL & SFML & assimp

  Read the article

• Using Windows and MMSystem in Delphi

  - by Jose Martinez

  Hi I am making a program to open and close the cd reader in which I have thought to write data to CD, the problem is the basis of the problem, which use "uses Windows 'and' uses MMSystem" but the problem is that when I use both at the same time being "uses Windows, MMSystem" gives an error and the program does not compile, I am using Delphi 2010, the strange thing is that when I use only one either Windows or MMSystem works fine and compiles. The error when I try to compile is: 'Could not find program' The code in question is this: mciSendString ('Set cdaudio door open wait', nil, 0, handle); I have two things to ask you first is how I avoid the error when using the two (Windows and MMSystem) and the other question was if he could open the CD player without using MMSystem, bone using Windows API, but not where to start The source : program Project1; {$APPTYPE CONSOLE} uses SysUtils,Windows,MMSystem; procedure opencd; begin mciSendString('Set cdaudio door open wait', nil, 0, 0); end; begin try Writeln('test'); except on E: Exception do Writeln(E.ClassName, ': ', E.Message); end; end. Image :

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >