Search Results

Search found 121 results on 5 pages for 'sketch'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Can't find PC on network

    - by Simon Verbeke
    I just got myself a new laptop, and set it up. It is connected to the wireless internet in my home. I then wanted to create a homegroup between the laptop and my desktop, but they can't find each other. Probably because the desktop has a wired connection to the router and the laptop is connected to a wireless access point. The router and the AP are connected to a switch in the middle by cable. A sketch of the network: Laptop - - - Wireless Access Point ----- Switch ----- Router ----- Desktop ^ ^ ^ ^ Wireless Wired Wired Wired They both point to the same gateway and DHCP-server (on 192.168.0.1). And I can ping to that address from both PCs. When I try to ping either of the PCs the pings time out. The subnets are also the same (255.255.255.0) and the IPs are in the same range (192.168.0.114 laptop, 192.168.0.205 desktop). So I don't really understand what I need to do to be able to access either computer from the other. The weird thing is that Synergy (to use mouse and keyboard over the network) works, just by using the IPs assigned to both PCs. The acces point is a linksys WAP54g, but I'm unsure of the Router, it has a custom casing from our ISP and hides any clues for identifying the product. I'm going to google a bit so I can add that info later. Both PC's are Windows 7 64 bit. The desktop is Ultimate, the laptop Professional.

    Read the article

  • Troubleshooting my internet connection

    - by Simon Verbeke
    While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

    Read the article

  • Silverlight Cream for March 17, 2010 -- #814

    - by Dave Campbell
    In this Issue: Tim Heuer(-2-), René Schulte(-2-), Bart Czernicki, Mark Monster, Pencho Popadiyn, Alex Golesh, Phil Middlemiss, and Yochay Kiriaty. Shoutouts: Check out the new themes, and Tim Heuer's poetry skills: SNEAK PEEK: New Silverlight application themes I learned to program Windows 3.1 from reading Charles Petzold's book, and here we are again: Free ebook: Programming Windows Phone 7 Series (DRAFT Preview) Here's a blog you're going to want to watch, and first up on the blog tonight is links to the complete set of MIX10 phone sessions: The Windows Phone Developer Blog First let me get a couple of things out of my system... "Holy Crap it's March 17th already" and "Holy Crap, we're all Windows Phone Developers!" I'm sure both of those were old news to anyone that's not been in a coma since Monday, but I've been a tad busy here at #MIX10. I'm not complainin' ... I'm just sayin' From SilverlightCream.com: Getting Started with Silverlight and Windows Phone 7 Development With any new Silverlight technology we have to begin with Tim Heuer... and this is Tim's announcement of Silverlight on the Windows Phone 7 Series ('cmon, can I call it a "Silverlight Phone"? ... please?) ... hope I didn't type that out loud :) ... so... in case you fell asleep Sunday, and just woke up, Tim let the dogs out on this and we could all talk about it. In all seriousness, bookmark this page... lots of good links. A guide to what has changed in the Silverlight 4 RC Continuing the 'bookmark this page' thought... Tim Heuer also has one up on what the heck is all in the Silverlight 4 RC they released on Monday... check this out... really good stuff in there... and a great post detailing it all. The Silverlight 4 Release Candidate René Schulte has a good post up detailing the new stuff in Silverlight 4 RC, with special attention paid to the webcam/mic and AsyncCaptureImage Let it ring - WriteableBitmapEx for Windows Phone René Schulte has a Windows Phone post up as well, introducing the WriteableBitmapEx library for Windows Phone... how cool is that?? Silverlight for Windows Phone 7 is NOT the same full Silverlight 3 RTM Bart Czernicki dug into the docs to expose some of the differences between Silverlight for the Windows Phone and Silverlight 3. If you've been developing in SL3 and want to also do Phone, check out this post and his resource listings. Trying to sketch a Windows Phone 7 application Mark Monster tried to SketchFlow a Windows Phone app and hit some problems... if anyone has thoughts, contribute on his blog page. Using Reactive Extensions in Silverlight – part 2 – Web Services Pencho Popadiyn has part 2 of his tutorial on Rx, and this one is concentrating on asynchronous service calls. Silverlight 4 Quick Tip: Out-Of-Browser Improvements This post from Alex Golesh is a little weird since he was sitting next to me in a session at MIX10 when he submitted it :) ... good update on what's new in OOB in the RC Turning a round button into a rounded panel I like Phil Middlemiss' other title for this post: "A Scalable Orb Panel-Button-Thingy" ... this is a very cool resizing button that works amazingly similar to the resizable skinned dialogs I did in Win32!... very cool, Phil! Go Get It – The Windows Phone Developer Training Kit Did you know there was a Windows Phone Training Kit with Hands-on Labs? Yochay Kiriaty at the Windows Phone Developer Blog wrote about it... I pulled it down, and it looks really good! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Merge sort versus quick sort performance

    - by Giorgio
    I have implemented merge sort and quick sort using C (GCC 4.4.3 on Ubuntu 10.04 running on a 4 GB RAM laptop with an Intel DUO CPU at 2GHz) and I wanted to compare the performance of the two algorithms. The prototypes of the sorting functions are: void merge_sort(const char **lines, int start, int end); void quick_sort(const char **lines, int start, int end); i.e. both take an array of pointers to strings and sort the elements with index i : start <= i <= end. I have produced some files containing random strings with length on average 4.5 characters. The test files range from 100 lines to 10000000 lines. I was a bit surprised by the results because, even though I know that merge sort has complexity O(n log(n)) while quick sort is O(n^2), I have often read that on average quick sort should be as fast as merge sort. However, my results are the following. Up to 10000 strings, both algorithms perform equally well. For 10000 strings, both require about 0.007 seconds. For 100000 strings, merge sort is slightly faster with 0.095 s against 0.121 s. For 1000000 strings merge sort takes 1.287 s against 5.233 s of quick sort. For 5000000 strings merge sort takes 7.582 s against 118.240 s of quick sort. For 10000000 strings merge sort takes 16.305 s against 1202.918 s of quick sort. So my question is: are my results as expected, meaning that quick sort is comparable in speed to merge sort for small inputs but, as the size of the input data grows, the fact that its complexity is quadratic will become evident? Here is a sketch of what I did. In the merge sort implementation, the partitioning consists in calling merge sort recursively, i.e. merge_sort(lines, start, (start + end) / 2); merge_sort(lines, 1 + (start + end) / 2, end); Merging of the two sorted sub-array is performed by reading the data from the array lines and writing it to a global temporary array of pointers (this global array is allocate only once). After each merge the pointers are copied back to the original array. So the strings are stored once but I need twice as much memory for the pointers. For quick sort, the partition function chooses the last element of the array to sort as the pivot and scans the previous elements in one loop. After it has produced a partition of the type start ... {elements <= pivot} ... pivotIndex ... {elements > pivot} ... end it calls itself recursively: quick_sort(lines, start, pivotIndex - 1); quick_sort(lines, pivotIndex + 1, end); Note that this quick sort implementation sorts the array in-place and does not require additional memory, therefore it is more memory efficient than the merge sort implementation. So my question is: is there a better way to implement quick sort that is worthwhile trying out? If I improve the quick sort implementation and perform more tests on different data sets (computing the average of the running times on different data sets) can I expect a better performance of quick sort wrt merge sort? EDIT Thank you for your answers. My implementation is in-place and is based on the pseudo-code I have found on wikipedia in Section In-place version: function partition(array, 'left', 'right', 'pivotIndex') where I choose the last element in the range to be sorted as a pivot, i.e. pivotIndex := right. I have checked the code over and over again and it seems correct to me. In order to rule out the case that I am using the wrong implementation I have uploaded the source code on github (in case you would like to take a look at it). Your answers seem to suggest that I am using the wrong test data. I will look into it and try out different test data sets. I will report as soon as I have some results.

    Read the article

  • Silverlight Cream for December 12, 2010 - 2 -- #1009

    - by Dave Campbell
    In this Issue: Michael Crump, Jesse Liberty, Shawn Wildermuth, Domagoj Pavlešic, Peter Kuhn, James Ashley, Sara Summers, Morten Nielsen, Peter Torr, and Tau Sick. Above the Fold: Silverlight: "Silverlight 4 – Coded UI Framework Video Tutorial" Michael Crump WP7: "Windows Phone From Scratch #12–Custom Behaviors (Part I)" Jesse Liberty From SilverlightCream.com: Silverlight 4 – Coded UI Framework Video Tutorial Michael Crump posted a video tutorial today on the Coded UI Test Framework that we got with the VS2010 Feature Pack 2. Wanna create automated tests? ... check out Michael's video and save yourself some time. Windows Phone From Scratch #12–Custom Behaviors (Part I) Jesse Liberty posted his Windows Phone from Scratch number 12 today... and it's on Custom Behaviors... cool stuff... need to read this and get your head around it... this is part 1, jump on it before he drops part 2 on us! The Next Application Platform? All of them... Shawn Wildermuth has a thought-provoking post up ... check it out and see if you're ready to join him on the adventure of building for all the platforms... Windows Phone 7 Accelerometer Test App Domagoj Pavlešic has a test app up for the accelerometer on the WP7 ... if you need to use it, and are having problems, a good example always helps me. Protocol of developing an animation texture tool Peter Kuhn found a need for a tool to creat some animations for an WP7 XNA game... so he challenged himself to write it, and detailed out all his steps as he went. Re-examining WP7 Launchers and Choosers James Ashley's most recent post is on the Pivot Control ... check this out... add a working Horizontally oriented slider to a pivot... plus some external links to help out New Prototyping Sketch Sheets for WP7 This is one of those posts that I had to go to SilverlightCream and make sure I hadn't hit it yet... pretty cool prototype sheets for WP7 by Sara Summers ... we've seen others, they're all good. Simulating GPS on Windows Phone 7 Morten Nielsen helps you get around the fact that you're not going to be able to use the emulator for testing your GPS app ... at least not without some assistance... and that doesn't mean hauling your dev system around your neighborhood, either. How to correctly handle application deactivation and reactivation We've seen posts on Tombstoning, but probably not from Silverlight team members... check this one out from Peter Torr ... great even sequence information and all the info on how to correctly handle it, plus external links to the documentation... you knew there was documentation, right? :) Localizing a Windows Phone 7 Application Tau Sick has a post up discussing Localization and your WP7 apps... coming from soneone with an app in the marketplace in 3 languages, it's a pretty good bet he's got it figured out! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Windows Azure Recipe: Mobile Computing

    - by Clint Edmonson
    A while back, mashups were all the rage. The idea was to compose solutions that provided aggregation and integration across applications and services to make information more available, useful, and personal. Mashups ushered in the era of Web 2.0 in all it’s socially connected goodness. They taught us that to be successful, we needed to add web service APIs to our web applications. Web and client based mashups met with great success and have evolved even further with the introduction of the internet connected smartphone. Nothing is more available, useful, or personal than our smartphones. The current generation of cloud connected mobile computing mashups allow our mobilized workforces to receive, process, and react to information from disparate sources faster than ever before. Drivers Integration Reach Time to market Solution Here’s a sketch of a prototypical mobile computing solution using Windows Azure: Ingredients Web Role – with the phone running a dedicated client application, the web role is responsible for serving up backend web services that implement the solution’s core connected functionality. Database – used to store core operational and workflow data for the solution’s web services. Access Control – this service is used to authenticate and manage users identity, roles, and groups, possibly in conjunction with 3rd identity providers such as Windows LiveID, Google, Yahoo!, and Facebook. Worker Role – this role is used to handle the orchestration of long-running, complex, asynchronous operations. While much of the integration and interaction with other services can be handled directly by the mobile client application, it’s possible that the backend may need to integrate with 3rd party services as well. Offloading this work to a worker role better distributes computing resources and keeps the web roles focused on direct client interaction. Queues – these provide reliable, persistent messaging between applications and processes. They are an absolute necessity once asynchronous processing is involved. Queues facilitate the flow of distributed events and allow a solution to send push notifications back to mobile devices at appropriate times. Training & Resources These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Windows Azure Toolkit for Windows Phone The Windows Azure Toolkit for Windows Phone is designed to make it easier for you to build mobile applications that leverage cloud services running in Windows Azure. The toolkit includes Visual Studio project templates for Windows Phone and Windows Azure, class libraries optimized for use on the phone, sample applications, and documentation Windows Azure Toolkit for iOS The Windows Azure Toolkit for iOS is a toolkit for developers to make it easy to access Windows Azure storage services from native iOS applications. The toolkit can be used for both iPhone and iPad applications, developed using Objective-C and XCode. Windows Azure Toolkit for Android The Windows Azure Toolkit for Android is a toolkit for developers to make it easy to work with Windows Azure from native Android applications. The toolkit can be used for native Android applications developed using Eclipse and the Android SDK. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • Windows Azure Recipe: Social Web / Big Media

    - by Clint Edmonson
    With the rise of social media there’s been an explosion of special interest media web sites on the web. From athletics to board games to funny animal behaviors, you can bet there’s a group of people somewhere on the web talking about it. Social media sites allow us to interact, share experiences, and bond with like minded enthusiasts around the globe. And through the power of software, we can follow trends in these unique domains in real time. Drivers Reach Scalability Media hosting Global distribution Solution Here’s a sketch of how a social media application might be built out on Windows Azure: Ingredients Traffic Manager (optional) – can be used to provide hosting and load balancing across different instances and/or data centers. Perfect if the solution needs to be delivered to different cultures or regions around the world. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model has extensibility points to hook into other identity providers as well. Web Role – hosts the core of the web application and presents a central social hub users. Database – used to store core operational, functional, and workflow data for the solution’s web services. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Tables (optional) – for semi-structured data streams that don’t need relational integrity such as conversations, comments, or activity streams, tables provide a faster and more flexible way to store this kind of historical data. Blobs (optional) – users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • Windows Azure Recipe: Consumer Portal

    - by Clint Edmonson
    Nearly every company on the internet has a web presence. Many are merely using theirs for informational purposes. More sophisticated portals allow customers to register their contact information and provide some level of interaction or customer support. But as our understanding of how consumers use the web increases, the more progressive companies are taking advantage of social web and rich media delivery to connect at a deeper level with the consumers of their goods and services. Drivers Cost reduction Scalability Global distribution Time to market Solution Here’s a sketch of how a Windows Azure Consumer Portal might be built out: Ingredients Web Role – this will host the core of the solution. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control (optional) – if identity needs to be tracked within the solution, the access control service combined with the Windows Identity Foundation framework provides out-of-the-box support for several social media platforms including Windows LiveID, Google, Yahoo!, Facebook. It also has a provider model to allow integration with other platforms as well. Caching (optional) – for sites with high traffic with lots of read-only data and lists, the distributed in-memory caching service can be used to cache and serve up static data at higher scale and speed than direct database requests. It can also be used to manage user session state. Blob Storage (optional) – for sites that serve up unstructured data such as documents, video, audio, device drivers, and more. The data is highly available and stored redundantly across data centers. Each entry in blob storage is provided with it’s own unique URL for direct access by the browser. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • "cloud architecture" concepts in a system architecture diagrams

    - by markus
    If you design a distributed application for easy scale-out, or you just want to make use of any of the new “cloud computing” offerings by Amazon, Google or Microsoft, there are some typical concepts or components you usually end up using: distributed blob storage (aka S3) asynchronous, durable message queues (aka SQS) non-Relational-/non-transactional databases (like SimpleDB, Google BigTable, Azure SQL Services) distributed background worker pool load-balanced, edge-service processes handling user requests (often virtualized) distributed caches (like memcached) CDN (content delivery network like Akamai) Now when it comes to design and sketch an architecture that makes use of such patterns, are there any commonly used symbols I could use? Or even a download with some cool Visio stencils? :) It doesn’t have to be a formal system like UML but I think it would be great if there were symbols that everyone knows and understands, like we have commonly used shapes for databases or a documents, for example. I think it would be important to not mix it up with traditional concepts like a normal file system (local or network server/SAN), or a relational database. Simply speaking, I want to be able to draw some conclusions about an application’s scalability or data consistency issues by just looking at the system architecture overview diagram. Update: Thank you very much for your answers. I like the idea of putting a small "cloud symbol" on the traditional symbols. However I leave this thread open just in case someone will find specific symbols (maybe in a book or so) - or uploaded some pimped up Visio stencils ;)

    Read the article

  • Programmatically implementing an interface that combines some instances of the same interface in var

    - by namin
    What is the best way to implement an interface that combines some instances of the same interface in various specified ways? I need to do this for multiple interfaces and I want to minimize the boilerplate and still achieve good efficiency, because I need this for a critical production system. Here is a sketch of the problem. Abstractly, I have a generic combiner class which takes the instances and specify the various combinators: class Combiner<I> { I[] instances; <T> T combineSomeWay(InstanceMethod<I,T> method) { // ... method.call(instances[i]) ... combined in some way ... } // more combinators } Now, let's say I want to implement the following interface among many others: Interface Foo { String bar(int baz); } I want to end up with code like this: class FooCombiner implements Foo { Combiner<Foo> combiner; @Override public String bar(final int baz) { return combiner.combineSomeWay(new InstanceMethod<Foo, String> { @Override public call(Foo instance) { return instance.bar(baz); } }); } } Now, this can quickly get long and winded if the interfaces have lots of methods. I know I could use a dynamic proxy from the Java reflection API to implement such interfaces, but method access via reflection is hundred times slower. So what are the alternatives to boilerplate and reflection in this case?

    Read the article

  • Can I make a "TCP packet modifier" using tun/tap and raw sockets?

    - by benhoyt
    I have a Linux application that talks TCP, and to help with analysis and statistics, I'd like to modify the data in some of the TCP packets that it sends out. I'd prefer to do this without hacking the Linux TCP stack. The idea I have so far is to make a bridge which acts as a "TCP packet modifier". My idea is to connect to the application via a tun/tap device on one side of the bridge, and to the network card via raw sockets on the other side of the bridge. My concern is that when you open a raw socket it still sends packets up to Linux's TCP stack, and so I couldn't modify them and send them on even if I wanted to. Is this correct? A pseudo-C-code sketch of the bridge looks like: tap_fd = open_tap_device("/dev/net/tun"); raw_fd = open_raw_socket(); for (;;) { select(fds = [tap_fd, raw_fd]); if (FD_ISSET(tap_fd, &fds)) { read_packet(tap_fd); modify_packet_if_needed(); write_packet(raw_fd); } if (FD_ISSET(raw_fd, &fds)) { read_packet(raw_fd); modify_packet_if_needed(); write_packet(tap_fd); } } Does this look possible, or are there other better ways of achieving the same thing? (TCP packet bridging and modification.)

    Read the article

  • Explaining the need to avoid horizontal scroll

    - by Bradley Herman
    I need help explaining to my boss why her design is poor on a client's website. She has no knowledge of the web, and it can be difficult as a web developer working with a woman who is a graphic designer (not even a web designer really). On a current site she has designed, an image bar "needs" to be ~1200px according to her, though it isn't necessary with the content. A quick sketch to illustrate what's going on: As you see, the banner spills out past the 960px of the content and as wide as 1200px. This creates a horizontal scroll when all the content is viewable within the 960px wide viewport. I need to make this an <img and not a CSS background because it's a jQuery slideshow that fades from image to image. I think this is a big problem because a lot of people are going to get a horizontal scroll bar imposed in their browser when they're still able to see all the relevant content. She thinks no one will notice and it'll be fine; I think it's very bad practice and confusing to the end user. How do I explain the problem to her?

    Read the article

  • Documentation for java.util.concurrent.locks.ReentrantReadWriteLock

    - by Andrei Taptunov
    Disclaimer: I'm not very good at Java and just comparing read/writer locks between C# and Java to understand this topic better & decisions behind both implementations. There is JavaDoc about ReentrantReadWriteLock. It states the following about upgrade/downgrade for locks: Lock downgrading ... However, upgrading from a read lock to the write lock is not possible. It also has the following example that shows manual upgrade from read lock to write lock: // Here is a code sketch showing how to exploit reentrancy // to perform lock downgrading after updating a cache void processCachedData() { rwl.readLock().lock(); if (!cacheValid) { // upgrade lock manually #1: rwl.readLock().unlock(); // must unlock first to obtain writelock #2: rwl.writeLock().lock(); if (!cacheValid) { // recheck ... } ... } use(data); rwl.readLock().unlock(); Does it mean that actually the sample from above may not behave correctly in some cases - I mean there is no lock between lines #1 & #2 and underlying structure is exposed to changes from other threads. So it can not be considered as the correct way to upgrade the lock or do I miss something here?

    Read the article

  • Explaining to boss why we need to avoid horizontal scroll

    - by Bradley Herman
    I need help explaining to my boss why her design is poor on a clients website. She has no knowledge of web and it can be difficult as a web developer working with a woman who is a graphic designer (not even a web designer really). On a current site she has designed, an image bar "needs" to be like 1200px according to her, though it isn't necessary with the content. I'll show a quick sketch to illustrate what's going on: http://imgur.com/MNGOT.jpg As you see, the banner spills out past the 960px of the content and as wide as 1200px. This creates a horizontal scroll when all the content is viewable within the 960px wide viewport. I need to make this an img and not a css background because it's a jquery slideshow that fades from image to image. I think this is a big problem because a lot of people are going to get a horizontal scroll bar imposed in their browser when they're still able to see all the relevant content. How do I help her explain it. She thinks no one will notice and it'll be fine, I think it's very bad practice and confusing to the end user. Any help?

    Read the article

  • Android Multiple Handlers Design Question

    - by Soumya Simanta
    This question is related to an existing question I asked. I though I'll ask a new question instead of replying back to the other question. Cannot "comment" on my previous question because of a word limit. Marc wrote - I've more than one Handlers in an Activity." Why? If you do not want a complicated handleMessage() method, then use post() (on Handler or View) to break the logic up into individual Runnables. Multiple Handlers makes me nervous. I'm new to Android. Is having multiple handlers in a single activity a bad design ? I'm new to Android. My question is - is having multiple handlers in a single activity a bad design ? Here is the sketch of my current implementation. I've a mapActivity that creates a data thread (a UDP socket that listens for data). My first handler is responsible for sending data from the data thread to the activity. On the map I've a bunch of "dynamic" markers that are refreshed frequently. Some of these markers are video markers i.e., if the user clicks a video marker, I add a ViewView that extends a android.opengl.GLSurfaceView to my map activity and display video on this new vide. I use my second handler to send information about the marker that the user tapped on ItemizedOverlay onTap(int index) method. The user can close the video view by tapping on the video view. I use my third handler for this. I would appreciate if people can tell me what's wrong with this approach and suggest better ways to implement this. Thanks.

    Read the article

  • syntax help required on templated static member function

    - by omatai
    I have a bunch of containers of object pointers that I want to iterate through in different contexts to produce diagnostics for them. I'm struggling with the syntax required to define the functions... which, on account of these objects filtering through diverse parts of my application, seem best encapsulated in a dedicated diagnostics class thus: // Code sketch only - detail fleshed out below... class ObjectListDiagnoser { public: static void GenerateDiagnostics( /* help required here! */ ); }; ... // Elsewhere in the system... ObjectListDiagnoser::GenerateDiagnostics( /* help required here! */ ); What I'd like to be able to do (in places across my application) is at least this: std::vector<MyObject *> objGroup1; std::list<MyObject *> objGroup2; ObjectListDiagnoser::GenerateDiagnostics( objGroup1.begin(), objGroup1.end() ); ObjectListDiagnoser::GenerateDiagnostics( objGroup2.begin(), objGroup2.end() ); ObjectListDiagnoser::GenerateDiagnostics( objGroup1.rbegin(), objGroup1.rend() ); I have tried to template my function in two ways, with no success: class ObjectListDiagnoser { public: // 1 - nope. template <class ObjIter> static void GenerateDiagnostics( ObjIter first, ObjIter last ); // 2. - nope. template <class Container, class ObjIter> static void GenerateDiagnostics( Container<MyObject *>::ObjIter first, Container<MyObject *>::ObjIter last ); }; Can someone provide the correct syntax for this? The container type will vary, and the direction of iteration will vary, but always for the same type of object.

    Read the article

  • How do I use Google's Gson API to deserialize JSON properly?

    - by FK82
    Hi, In short, this is a sketch of the JSON object I want to parse in JAVA: { object1: { item1: //[String | Array | Object] , item2: // ... //<> more items object2: { // } //<> more objects } These are the POJO s I created for parsing (I'll leave out the import statements for brevity's sake): (1) The representation of the complete JSON object public class JObjectContainer { private List<JObject> jObjects ; public JObjectContainer() { // } //get & set methods } (2) The representation of the nested objects: public class JObject { private String id ; private List<JNode> jObjects ; public JObject() { // } //get & set methods } (3) The representation of the items: public class JNode { private JsonElement item1 ; private JsonElement item2 ; //<> more item fields public JNode() { // } //get & set methods } Now, creating a Gson instance (FileReader for importing the jsonFile), Gson gson = new Gson() ; JObjectContainer joc = gson(jsonFile,JObjectContainer.class) ; I get a NullPointerException whenever I try to access the parseable object (e.g. through a ListIterator). Gson does however create an object of the class I specified and does not throw any subsequent errors. I know that this has been done before. So, what am I missing? TIA

    Read the article

  • Libraries and pseudocode for physical Dashboard/Status board

    - by dani
    OK, so I bought a 46" screen for the office yesterday, and with the imminent risk of being accused for setting up an "elaborate World Cup procrastination scheme", I'd better show my colleagues what it's meant for ;) Looking at my simple sketch, and at these great projects from which I was inspired, I would like to get some input on the following: Pseudocode for the skeleton: As some methods should be called every 24 hours ("Today's date in the heading"), others at 60 second intervals ("Twitter results"), what would be a good approach using JavaScript (jQuery) and PHP? EDIT: Alsciende: I can agree that #1 and #8 are too vague. Therefore I remove #8 and try to clarify #1: With "Pseudocode for the skeleton", I basically mean could this be done entirely using JavaScript timers and how would you set up the various timers? Library for Google Analytics: Which libraries support the Google Analytics API and can produce neat charts. Preferably HTML5, JavaScript-based like Protovis. Library for Twitter: Which libraries would you recommend for fetching twitter search results and latest tweets from profiles. Libraries for Typography/CSS/HTML5: Trying to learn some HTML5 etc. in the process, please advice on any other typography/css libraries that could be of relevance. Scraping/Parsing? I'll give you a concrete example: Trying to fetch today's menu from this restaurant's website, how would you go about? (it's in Swedish - but you get the point - sorry ;) ) Real-time stats? I'm using the WassUp-plugin for WordPress to track real-time visitors on our website. Other logging software (AWStats etc.) is probably also installed on the webserver. Any ideas on how to extract information from these and present in real-time on the dashboard? Browser choice? Which Browser and OS would you pick? Stable, Full-screen, HTML5.

    Read the article

  • private class calling a method from its outer class

    - by oxinabox.ucc.asn.au
    Ok, so I have a class for a "Advanced Data Structure" (in this case a kinda tree) SO I implimented a Iterator as a private class with in it. So the iterator needs to implement a remove function to remove the last retuirned element. now my ADT already impliments a remove function, and in this case there is very little (thinking about it, i think nothing) to be gain by implimenting a different remove function for the iterator. so how do I go about calling the remove from my ADT sketch of my struture: public class ADT { ... private class ADT_Iterator impliments java.util.Itorator{ ... public void remove(){ //where I want to call the ADT's remove function from } ... public void remove( Object paramFoo ) { ... } ... } So just calling remove(FooInstance) won't work (will it?) and this.remove(FooInstance) is the same thing. what do i call? (and changign the name of the ADT's remove function is not an option, as that AD T has to meet an Interace wich I am note at liberty to change) I could make both of them call a removeHelper functon, I guess...

    Read the article

  • rename an html page according to an image within it

    - by Jake
    Hi, firstly I'll give some background regarding the situation. I have a website containing approximately 56k pages each page contain a mapped sketch of a machine part. this machine part is made out of smaller parts which are outlined in the image and hold a certain number. when you hover over the numbers a box with the part item code shows up. I order parts according to this item codes but recently a lot of the items codes have changed, therefore I am looking for a solution. now I own a database with data on all the 56k parts and I want to link the relevant webpage to each record according to the name of the part(a column in my database), the problem is that the webpages names has no logic name that could connect with the part name in any way but the image that is displayed in the page has the exact name of the part. I want to rename all the html files I has according to the Images displayed within them. how can I achieve that without renaming all the 56k pages manually? additionally how can I add the links to all the 56k pages automatically to my database after all the above is done? Thank you for your patience I know it was long.

    Read the article

  • Java UnknownHostException When and Why?

    - by interstar
    I'm trying to post to a website from a Processing Sketch. (Processing is basically Java running in a fancy environment). I'm using this library : http://libraries.seltar.org/postToWeb/ but I don't know if that makes a difference. You can see from the stack trace below that this is just a wrapper for the Java standard library. Anyway, the important point is that the host "mysite.com" is up and running. I am seeing it from the browser. But when I try to post to it from Java I just get the UnknownHostException appearing. Given that the site is up. What else might this mean? The program is currently running inside the Processing environment. Presumably as an Applet. java.net.UnknownHostException: mysite.com at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:195) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:529) at java.net.Socket.connect(Socket.java:478) at sun.net.NetworkClient.doConnect(NetworkClient.java:163) at sun.net.www.http.HttpClient.openServer(HttpClient.java:394) at sun.net.www.http.HttpClient.openServer(HttpClient.java:529) at sun.net.www.http.HttpClient.<init>(HttpClient.java:233) at sun.net.www.http.HttpClient.New(HttpClient.java:306) at sun.net.www.http.HttpClient.New(HttpClient.java:323) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:970) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:911) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:836) at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1014) at org.seltar.Bytes2Web.PostToWeb._post(PostToWeb.java:90) at org.seltar.Bytes2Web.ByteToWeb.post(ByteToWeb.java:66) at experimentPostToWeb.keyPressed(experimentPostToWeb.java:35) at processing.core.PApplet.handleKeyEvent(Unknown Source) at processing.core.PApplet.dequeueKeyEvents(Unknown Source) at processing.core.PApplet.handleDraw(Unknown Source) at processing.core.PApplet.run(Unknown Source) at java.lang.Thread.run(Thread.java:662)

    Read the article

  • Programming style question on how to code functions

    - by shawnjan
    Hey all! So, I was just coding a bit today, and I realized that I don't have much consistency when it comes to a coding style when programming functions. One of my main concerns is whether or not its proper to code it so that you check that the input of the user is valid OUTSIDE of the function, or just throw the values passed by the user into the function and check if the values are valid in there. Let me sketch an example: I have a function that lists hosts based on an environment, and I want to be able to split the environment into chunks of hosts. So an example of the usage is this: listhosts -e testenv -s 2 1 This will get all the hosts from the "testenv", split it up into two parts, and it is displaying part one. In my code, I have a function that you pass it in a list, and it returns a list of lists based on you parameters for splitting. BUT, before I pass it a list, I first verify the parameters in my MAIN during the getops process, so in the main I check to make sure there are no negatives passed by the user, I make sure the user didnt request to split into say, 4 parts, but asking to display part 5 (which would not be valid), etc. tl;dr: Would you check the validity of a users input the flow of you're MAIN class, or would you do a check in your function itself, and either return a valid response in the case of valid input, or return NULL in the case of invalid input? Obviously both methods work, I'm just interested to hear from experts as to which approach is better :) Thanks for any comments and suggestions you guys have!

    Read the article

  • Recursive Enumeration in Java

    - by Harm De Weirdt
    Hello everyone. I still have a question about Enumerations. Here's a quick sketch of the situation. I have a class Backpack that has a Hashmap content with as keys a variable of type long, and as value an ArrayList with Items. I have to write an Enumeration that iterates over the content of a Backpack. But here's the catch: in a Backpack, there can also be another Backpack. And the Enumeration should also be able to iterate over the content of a backpack that is in the backpack. (I hope you can follow, I'm not really good at explaining..) Here is the code I have: public Enumeration<Object> getEnumeration() { return new Enumeration<Object>() { private int itemsDone = 0; //I make a new array with all the values of the HashMap, so I can use //them in nextElement() Collection<Long> keysCollection = getContent().keySet(); Long [] keys = keysCollection.toArray(new Long[keysCollection.size()]); public boolean hasMoreElements() { if(itemsDone < getContent().size()) { return true; }else { return false; } } public Object nextElement() { ArrayList<Item> temporaryList= getContent().get(keys[itemsDone]); for(int i = 0; i < temporaryList.size(); i++) { if(temporaryList.get(i) instanceof Backpack) { return temporaryList.get(i).getEnumeration(); }else { return getContent().get(keys[itemsDone++]); } } } }; Will this code work decently? It's just the "return temporaryList.get(i).getEnumeration();" I'm worried about. Will the users still be able to use just the hasMoreElemens() and nextElement() like he would normally do? Any help is appreciated, Harm De Weirdt

    Read the article

  • Monads with Join() instead of Bind()

    - by MathematicalOrchid
    Monads are usually explained in turns of return and bind. However, I gather you can also implement bind in terms of join (and fmap?) In programming languages lacking first-class functions, bind is excruciatingly awkward to use. join, on the other hand, looks quite easy. I'm not completely sure I understand how join works, however. Obviously, it has the [Haskell] type join :: Monad m = m (m x) - m x For the list monad, this is trivially and obviously concat. But for a general monad, what, operationally, does this method actually do? I see what it does to the type signatures, but I'm trying to figure out how I'd write something like this in, say, Java or similar. (Actually, that's easy: I wouldn't. Because generics is broken. ;-) But in principle the question still stands...) Oops. It looks like this has been asked before: Monad join function Could somebody sketch out some implementations of common monads using return, fmap and join? (I.e., not mentioning >>= at all.) I think perhaps that might help it to sink in to my dumb brain...

    Read the article

  • Windows Azure Recipe: Enterprise LOBs

    - by Clint Edmonson
    Enterprises are more and more dependent on their specialized internal Line of Business (LOB) applications than ever before. Naturally, the more software they leverage on-premises, the more infrastructure they need manage. It’s frequently the case that our customers simply can’t scale up their hardware purchases and operational staff as fast as internal demand for software requires. The result is that getting new or enhanced applications in the hands of business users becomes slower and more expensive every day. Being able to quickly deliver applications in a rapidly changing business environment while maintaining high standards of corporate security is a challenge that can be met right now by moving enterprise LOBs out into the cloud and leveraging Azure’s Access Control services. In fact, we’re seeing many of our customers (both large and small) see huge benefits from moving their web based business applications such as corporate help desks, expense tracking, travel portals, timesheets, and more to Windows Azure. Drivers Cost Reduction Time to market Security Solution Here’s a sketch of how many Windows Azure Enterprise LOBs are being architected and deployed: Ingredients Web Role – this will host the core of the application. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Many Java based applications are also being deployed to Windows Azure with a little more effort. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control – this service is necessary to establish federated identity between the cloud hosted application and an enterprise’s corporate network. It works in conjunction with a secure token service (STS) that is hosted on-premises to establish the corporate user’s identity and credentials. The source code for an on-premises STS is provided in the Windows Azure training kit and merely needs to be customized for the corporate environment and published on a publicly accessible corporate web site. Once set up, corporate users see a near seamless single sign-on experience. Reporting – businesses live and die by their reports and SQL Azure Reporting, based on SQL Server Reporting 2008 R2, can serve up reports with tables, charts, maps, gauges, and more. These reports can be accessed from the Windows Azure Portal, through a web browser, or directly from applications. Service Bus (optional) – if deep integration with other applications and systems is needed, the service bus is the answer. It enables secure service layer communication between applications hosted behind firewalls in on-premises or partner datacenters and applications hosted inside Windows Azure. The Service Bus provides the ability to securely expose just the information and services that are necessary to create a simpler, more secure architecture than opening up a full blown VPN. Data Sync (optional) – in cases where the data stored in the cloud needs to be shared internally, establishing a secure one-way or two-way data-sync connection between the on-premises and off-premises databases is a perfect option. It can be very granular, allowing us to specify exactly what tables and columns to synchronize, setup filters to sync only a subset of rows, set the conflict resolution policy for two-way sync, and specify how frequently data should be synchronized Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >