Search Results

Search found 108 results on 5 pages for 'watchdog'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• Kernel oops on Linux running in VirtualBox breaks some IO-related functionality on the server

  - by Kristoffer E

  We are having problems with CentOS release 6.3 running in VirtualBox on Windows 7 machines. The symptoms are the following: Everything works as normal for several hours, even days. Then something happens which breaks the system. What we still can do after this something happens: Access the web server Use existing SSH sessions to run top and free What does not work: Starting new SSH sessions (hangs after username and password is entered) Running ls in existing SSH sessions (hangs) SSI includes from our web servers that fetch data from remote machines probably more What we see on the server when this something happens is the following: Load average go from basically nothing to around 3 CPU usage is still low (5%) Disk activity is low (running iostat) Plenty of memory available Plenty of disk space available In /var/log/messages we get the following: Jun 14 01:10:48 devvm kernel: e1000 0000:00:03.0: eth0: Detected Tx Unit Hang Jun 14 01:10:48 devvm kernel: Tx Queue <0> Jun 14 01:10:48 devvm kernel: TDH <2e> Jun 14 01:10:48 devvm kernel: TDT <30> Jun 14 01:10:48 devvm kernel: next_to_use <30> Jun 14 01:10:48 devvm kernel: next_to_clean <2e> Jun 14 01:10:48 devvm kernel: buffer_info[next_to_clean] Jun 14 01:10:48 devvm kernel: time_stamp <1038284db> Jun 14 01:10:48 devvm kernel: next_to_watch <2f> Jun 14 01:10:48 devvm kernel: jiffies <103828b42> Jun 14 01:10:48 devvm kernel: next_to_watch.status <0> Jun 14 01:10:50 devvm kernel: e1000 0000:00:03.0: eth0: Detected Tx Unit Hang Jun 14 01:10:50 devvm kernel: Tx Queue <0> Jun 14 01:10:50 devvm kernel: TDH <2e> Jun 14 01:10:50 devvm kernel: TDT <30> Jun 14 01:10:50 devvm kernel: next_to_use <30> Jun 14 01:10:50 devvm kernel: next_to_clean <2e> Jun 14 01:10:50 devvm kernel: buffer_info[next_to_clean] Jun 14 01:10:50 devvm kernel: time_stamp <1038284db> Jun 14 01:10:50 devvm kernel: next_to_watch <2f> Jun 14 01:10:50 devvm kernel: jiffies <103829312> Jun 14 01:10:50 devvm kernel: next_to_watch.status <0> Jun 14 01:10:52 devvm kernel: ------------[ cut here ]------------ Jun 14 01:10:52 devvm kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Jun 14 01:10:52 devvm kernel: Hardware name: VirtualBox Jun 14 01:10:52 devvm kernel: NETDEV WATCHDOG: eth0 (e1000): transmit queue 0 timed out Jun 14 01:10:52 devvm kernel: Modules linked in: vboxsf(U) ipv6 ppdev parport_pc parport microcode sg vboxguest(U) i2c_piix4 i2c_core e1000 snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc pcnet32 mii ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Jun 14 01:10:52 devvm kernel: Pid: 0, comm: swapper Not tainted 2.6.32-279.el6.x86_64 #1 Jun 14 01:10:52 devvm kernel: Call Trace: Jun 14 01:10:52 devvm kernel: <IRQ> [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 Jun 14 01:10:52 devvm kernel: [<ffffffff8106b836>] ? warn_slowpath_fmt+0x46/0x50 Jun 14 01:10:52 devvm kernel: [<ffffffff814595fd>] ? dev_watchdog+0x26d/0x280 Jun 14 01:10:52 devvm kernel: [<ffffffff81099138>] ? sched_clock_cpu+0xb8/0x110 Jun 14 01:10:52 devvm kernel: [<ffffffff81459390>] ? dev_watchdog+0x0/0x280 Jun 14 01:10:52 devvm kernel: [<ffffffff8107e897>] ? run_timer_softirq+0x197/0x340 Jun 14 01:10:52 devvm kernel: [<ffffffff810a21c0>] ? tick_sched_timer+0x0/0xc0 Jun 14 01:10:52 devvm kernel: [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30 Jun 14 01:10:52 devvm kernel: [<ffffffff81073ec1>] ? __do_softirq+0xc1/0x1e0 Jun 14 01:10:52 devvm kernel: [<ffffffff81096c50>] ? hrtimer_interrupt+0x140/0x250 Jun 14 01:10:52 devvm kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 Jun 14 01:10:52 devvm kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 Jun 14 01:10:52 devvm kernel: [<ffffffff81073ca5>] ? irq_exit+0x85/0x90 Jun 14 01:10:52 devvm kernel: [<ffffffff81505be0>] ? smp_apic_timer_interrupt+0x70/0x9b Jun 14 01:10:52 devvm kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 Jun 14 01:10:52 devvm kernel: <EOI> [<ffffffff810387cb>] ? native_safe_halt+0xb/0x10 Jun 14 01:10:52 devvm kernel: [<ffffffff810149cd>] ? default_idle+0x4d/0xb0 Jun 14 01:10:52 devvm kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 Jun 14 01:10:52 devvm kernel: [<ffffffff814e433a>] ? rest_init+0x7a/0x80 Jun 14 01:10:52 devvm kernel: [<ffffffff81c21f7b>] ? start_kernel+0x424/0x430 Jun 14 01:10:52 devvm kernel: [<ffffffff81c2133a>] ? x86_64_start_reservations+0x125/0x129 Jun 14 01:10:52 devvm kernel: [<ffffffff81c21438>] ? x86_64_start_kernel+0xfa/0x109 Jun 14 01:10:52 devvm kernel: ---[ end trace 2c7bb984812cf120 ]--- Jun 14 01:10:52 devvm kernel: e1000 0000:00:03.0: eth0: Reset adapter Jun 14 01:10:53 devvm abrtd: Directory 'oops-2013-06-14-01:10:53-1537-0' creation detected Jun 14 01:10:53 devvm abrt-dump-oops: Reported 1 kernel oopses to Abrt Jun 14 01:10:53 devvm abrtd: Can't open file '/var/spool/abrt/oops-2013-06-14-01:10:53-1537-0/uid': No such file or directory Jun 14 01:10:55 devvm kernel: Bridge firewalling registered After this we see for a while, every two minutes: Jun 14 01:14:22 devvm kernel: INFO: task events/0:19 blocked for more than 120 seconds. Jun 14 01:14:22 devvm kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 14 01:14:22 devvm kernel: events/0 D 0000000000000000 0 19 2 0x00000000 Jun 14 01:14:22 devvm kernel: ffff880116c4fb90 0000000000000046 00000000ffffffff 0000000000000008 Jun 14 01:14:22 devvm kernel: 0000000000016680 0000000000016680 ffff880028210400 0000000000016680 Jun 14 01:14:22 devvm kernel: ffff880116c4daf8 ffff880116c4ffd8 000000000000fb88 ffff880116c4daf8 Jun 14 01:14:22 devvm kernel: Call Trace: Jun 14 01:14:22 devvm kernel: [<ffffffff8105b483>] ? perf_event_task_sched_out+0x33/0x80 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100975d>] ? __switch_to+0x13d/0x320 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe323>] wait_for_common+0x123/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff81060250>] ? default_wake_function+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d093>] __cancel_work_timer+0x1b3/0x1e0 Jun 14 01:14:22 devvm kernel: [<ffffffff8108cbe0>] ? wq_barrier_func+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d0f0>] cancel_work_sync+0x10/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffffa01c5ca5>] e1000_down_and_stop+0x25/0x50 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cb695>] e1000_down+0x155/0x200 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cbcb0>] ? e1000_reset_task+0x0/0xe0 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cbd1e>] e1000_reset_task+0x6e/0xe0 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffff8108c760>] worker_thread+0x170/0x2a0 Jun 14 01:14:22 devvm kernel: [<ffffffff810920d0>] ? autoremove_wake_function+0x0/0x40 Jun 14 01:14:22 devvm kernel: [<ffffffff8108c5f0>] ? worker_thread+0x0/0x2a0 Jun 14 01:14:22 devvm kernel: [<ffffffff81091d66>] kthread+0x96/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100c14a>] child_rip+0xa/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff81091cd0>] ? kthread+0x0/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100c140>] ? child_rip+0x0/0x20 Jun 14 01:14:22 devvm kernel: INFO: task parted:8069 blocked for more than 120 seconds. Jun 14 01:14:22 devvm kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 14 01:14:22 devvm kernel: parted D 0000000000000003 0 8069 7994 0x00000080 Jun 14 01:14:22 devvm kernel: ffff8800908b3bb8 0000000000000082 0000000000000000 ffff88010ab50080 Jun 14 01:14:22 devvm kernel: ffff880116c7d500 0000000000000001 0000000000000000 0000000000000000 Jun 14 01:14:22 devvm kernel: ffff88010ab50638 ffff8800908b3fd8 000000000000fb88 ffff88010ab50638 Jun 14 01:14:22 devvm kernel: Call Trace: Jun 14 01:14:22 devvm kernel: [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe323>] wait_for_common+0x123/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff81060250>] ? default_wake_function+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8112b6d0>] ? lru_add_drain_per_cpu+0x0/0x10 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d177>] flush_work+0x77/0xc0 Jun 14 01:14:22 devvm kernel: [<ffffffff8108cbe0>] ? wq_barrier_func+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d2f3>] schedule_on_each_cpu+0x133/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff811ad440>] ? invalidate_bh_lru+0x0/0x50 Jun 14 01:14:22 devvm kernel: [<ffffffff8112ae35>] lru_add_drain_all+0x15/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff811adf6a>] invalidate_bdev+0x2a/0x50 Jun 14 01:14:22 devvm kernel: [<ffffffff8125e9a4>] blkdev_ioctl+0x3b4/0x6e0 Jun 14 01:14:22 devvm kernel: [<ffffffff811b381c>] block_ioctl+0x3c/0x40 Jun 14 01:14:22 devvm kernel: [<ffffffff8118dec2>] vfs_ioctl+0x22/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8118e064>] do_vfs_ioctl+0x84/0x580 Jun 14 01:14:22 devvm kernel: [<ffffffff8118e5e1>] sys_ioctl+0x81/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b In /var/spool/abrt/oops-2013-06-14-01:10:53-1537-0 we can see the following information: In backtrace: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Hardware name: VirtualBox NETDEV WATCHDOG: eth0 (e1000): transmit queue 0 timed out Modules linked in: vboxsf(U) ipv6 ppdev parport_pc parport microcode sg vboxguest(U) i2c_piix4 i2c_core e1000 snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc pcnet32 mii ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted 2.6.32-279.el6.x86_64 #1 Call Trace: <IRQ> [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b836>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff814595fd>] ? dev_watchdog+0x26d/0x280 [<ffffffff81099138>] ? sched_clock_cpu+0xb8/0x110 [<ffffffff81459390>] ? dev_watchdog+0x0/0x280 [<ffffffff8107e897>] ? run_timer_softirq+0x197/0x340 [<ffffffff810a21c0>] ? tick_sched_timer+0x0/0xc0 [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30 [<ffffffff81073ec1>] ? __do_softirq+0xc1/0x1e0 [<ffffffff81096c50>] ? hrtimer_interrupt+0x140/0x250 [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 [<ffffffff81073ca5>] ? irq_exit+0x85/0x90 [<ffffffff81505be0>] ? smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff810387cb>] ? native_safe_halt+0xb/0x10 [<ffffffff810149cd>] ? default_idle+0x4d/0xb0 [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 [<ffffffff814e433a>] ? rest_init+0x7a/0x80 [<ffffffff81c21f7b>] ? start_kernel+0x424/0x430 [<ffffffff81c2133a>] ? x86_64_start_reservations+0x125/0x129 [<ffffffff81c21438>] ? x86_64_start_kernel+0xfa/0x109 In cmdline: ro root=/dev/mapper/vg_01-lv_root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_01/lv_root crashkernel=129M@0M rhgb quiet rd_LVM_LV=vg_01/lv_swap rd_NO_DM rhgb quie Additional information: # uname -a Linux devvm 2.6.32-279.el6.x86_64 #1 SMP Fri Jun 22 12:19:21 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/redhat-release CentOS release 6.3 (Final) VirtualBox version 4.2.6. Any insight in how we can proceed with troubleshooting this is appreciated. If you need more information, just let me know.

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• Can I ignore a SIGFPE resulting from division by zero?

  - by Mikeage

  I have a program which deliberately performs a divide by zero (and stores the result in a volatile variable) in order to halt in certain circumstances. However, I'd like to be able to disable this halting, without changing the macro that performs the division by zero. Is there any way to ignore it? I've tried using #include <signal.h> ... int main(void) { signal(SIGFPE, SIG_IGN); ... } but it still dies with the message "Floating point exception (core dumped)". I don't actually use the value, so I don't really care what's assigned to the variable; 0, random, undefined... EDIT: I know this is not the most portable, but it's intended for an embedded device which runs on many different OSes. The default halt action is to divide by zero; other platforms require different tricks to force a watchdog induced reboot (such as an infinite loop with interrupts disabled). For a PC (linux) test environment, I wanted to disable the halt on division by zero without relying on things like assert.

  Read the article

• create an independent hidden process

  - by Jessica

  I'm creating an application with its main window hidden by using the following code: STARTUPINFO siStartupInfo; PROCESS_INFORMATION piProcessInfo; memset(&siStartupInfo, 0, sizeof(siStartupInfo)); memset(&piProcessInfo, 0, sizeof(piProcessInfo)); siStartupInfo.cb = sizeof(siStartupInfo); siStartupInfo.dwFlags = STARTF_USESHOWWINDOW | STARTF_FORCEOFFFEEDBACK | STARTF_USESTDHANDLES; siStartupInfo.wShowWindow = SW_HIDE; if(CreateProcess(MyApplication, "", 0, 0, FALSE, 0, 0, 0, &siStartupInfo, &piProcessInfo) == FALSE) { // blah return 0; } Everything works correctly except my main application (the one calling this code) window loses focus when I open the new program. I tried lowering the priority of the new process but the focus problem is still there. Is there anyway to avoid this? furthermore, is there any way to create another process without using CreateProcess (or any of the API's that call CreateProcess like ShellExecute)? My guess is that my app is losing focus because it was given to the new process, even when it's hidden. To those of you curious out there that will certainly ask the usual "why do you want to do this", my answer is because I have a watchdog process that cannot be a service and it gets started whenever I open my main application. Satisfied? Thanks for the help. Code will be appreciated. Jess.

  Read the article

• Python: two loops at once

  - by Stephan Meijer

  I've got a problem: I am new to Python and I want to do multiple loops. I want to run a WebSocket client (Autobahn) and I want to run a loop which shows the filed which are edited in a specific folder (pyinotify or else Watchdog). Both are running forever, Great. Is there a way to run them at once and send a message via the WebSocket connection while I'm running the FileSystemWatcher, like with callbacks, multithreading, multiprocessing or just separate files? factory = WebSocketClientFactory("ws://localhost:8888/ws", debug=False) factory.protocol = self.webSocket connectWS(factory) reactor.run() If we run this, it will have success. But if we run this: factory = WebSocketClientFactory("ws://localhost:8888/ws", debug=False) factory.protocol = self.webSocket connectWS(factory) reactor.run() # Websocket client running now,running the filewatcher wm = pyinotify.WatchManager() mask = pyinotify.IN_DELETE | pyinotify.IN_CREATE # watched events class EventHandler(pyinotify.ProcessEvent): def process_IN_CREATE(self, event): print "Creating:", event.pathname def process_IN_DELETE(self, event): print "Removing:", event.pathname handler = EventHandler() notifier = pyinotify.Notifier(wm, handler) wdd = wm.add_watch('/tmp', mask, rec=True) notifier.loop() This will create 2 loops, but since we already have a loop, the code after 'reactor.run()' will not run at all.. For your information: this project is going to be a sync client. Thanks a lot!

  Read the article

• Preventing a heavy process from sinking in the swap file

  - by eran

  Our service tends to fall asleep during the nights on our client's server, and then have a hard time waking up. What seems to happen is that the process heap, which is sometimes several hundreds of MB, is moved to the swap file. This happens at night, when our service is not used, and others are scheduled to run (DB backups, AV scans etc). When this happens, after a few hours of inactivity the first call to the service takes up to a few minutes (consequent calls take seconds). I'm quite certain it's an issue of virtual memory management, and I really hate the idea of forcing the OS to keep our service in the physical memory. I know doing that will hurt other processes on the server, and decrease the overall server throughput. Having that said, our clients just want our app to be responsive. They don't care if nightly jobs take longer. I vaguely remember there's a way to force Windows to keep pages on the physical memory, but I really hate that idea. I'm leaning more towards some internal or external watchdog that will initiate higher-level functionalities (there is already some internal scheduler that does very little, and makes no difference). If there were a 3rd party tool that provided that kind of service is would have been just as good. I'd love to hear any comments, recommendations and common solutions to this kind of problem. The service is written in VC2005 and runs on Windows servers.

  Read the article

• Error with threads during automatic testing on TeamCity 5

  - by yeyeyerman

  Hello, I'm having some problems executing the tests of the application I'm developing. All the tests execute normally with ReSharper and in NCover. However, the execution of one of these tests in TeamCity is generating an error. This test initializes two objects, the object under test and a simulator of a real object. Both objects will communicate throug a serial link in a representation of the real scenario. ObjectSimulator r_simulator = new ObjectSimulator(...); ObjectDriver r_driver = new ObjectDriver(...); Assert.IsTrue(r_driver.Connect() == ErrorCode.Success); The simulator just do the following in the constructor public class ObjectSimulator { ... public ObjectSimulator() { // serial port configuration m_port = new SerialPort(); m_port.DataReceived += DataReceivedEvent; } ... } The main object has two threads. The main thread of the application and a timer to refresh a watchdog timer in the real object. public ErrorCode Connect() { ... StartSynchroTimer(); Thread.Sleep(4); // to check if the timer is working properly ... } The problem is comming from the Thread.Sleep() call, as when I remove it everything works. It seems like the ObjectSimulator also sleeps and doesn't receive the DataReceived event. How can I resolve this issue?

  Read the article

• Error with `Thread.Sleep` during automatic testing on TeamCity 5

  - by yeyeyerman

  Hello, I'm having some problems executing the tests of the application I'm developing. All the tests execute normally with ReSharper and in NCover. However, the execution of one of these tests in TeamCity is generating an error. This test initializes two objects, the object under test and a simulator of a real object. Both objects will communicate throug a serial link in a representation of the real scenario. ObjectSimulator r_simulator = new ObjectSimulator(...); ObjectDriver r_driver = new ObjectDriver(...); Assert.IsTrue(r_driver.Connect() == ErrorCode.Success); The simulator just do the following in the constructor public class ObjectSimulator { ... public ObjectSimulator() { // serial port configuration m_port = new SerialPort(); m_port.DataReceived += DataReceivedEvent; } ... } The main object has two threads. The main thread of the application and a timer to refresh a watchdog timer in the real object. public ErrorCode Connect() { ... StartSynchroTimer(); Thread.Sleep(4); // to check if the timer is working properly ... } The problem seems to be comming from the Thread.Sleep() call, as when I remove it everything works. The ObjectSimulator somehow doesn't execute the DataReceived event callback. How can I resolve this issue?

  Read the article

• HT Link Sync Error after Ubuntu 10.04 LTS Installation

  - by marklab

  Update 1 I just assembled an exact replica of this server, and successfully installed Ubuntu 10.04 LTS in a RAID10 configuration. The success was confirmed by a login to the initial account. There must be a hardware component that is faulty. Since the error mentions HT, which I believe to be Hyper Threading, I will start with the CPUs. Please indicate if this error is more strongly associated with any other piece of hardware. Or make a recommendation of another approach that would be good for this issue. Issue I was attempting to install Ubuntu 10.04 LTS on this system with the board RAID10 configured. However, the installation failed at the partitioning stage by rebooting the system. Upon reboot, there is an error report after POST listing the following: Node0: NB WatchDog Timer Error Node1: HT Link Sync Error Node2: HT Link Sync Error ... Node7: HT Link Sync Error Press F1 to continue/resume. After pressing F1 the system will boot from the Ubuntu 10.04 LTS installation disc. However, it will fail at the same stage, and go through the same process from there. Hardware CPU: AMD OPTERON X12 6172 G34 2.1G 18MB Motherboard: Supermicro H8QG6-F HDD: WD Caviar Green 2TB 5.4K RPM Troubleshooting I disabled RAID10 on the system, and installed the Ubuntu on a single drive. It installed successfully. I then went back to a RAID10 setup and attempted to install on the system again, and was able to make it through the partitioning stage. However, upon reboot, the system reported: Error: file not found, and then booted me into the Grub Rescue console. I feel I have aggravated the problem at this point because when I attempted to install from the boot disc again, the system reboots upon hitting enter to even start the installation process. It does the same thing when trying to boot from an Ubuntu 11 disc. I have not been able to find any information on this HT Link Sync Error, which I feel may have started the problems I am experiencing now with the installation of the OS. I am also aware that Ubuntu is said not to be supported by the motherboard according to Supermicro's site. However, since I was able to install it successfully on a single drive, I do not believe it is incompatible. I would like to know a reason for why it's failing to install on/off.

  Read the article

• Slow Memcached: Average 10ms memcached `get`

  - by Chris W.

  We're using Newrelic to measure our Python/Django application performance. Newrelic is reporting that across our system "Memcached" is taking an average of 12ms to respond to commands. Drilling down into the top dozen or so web views (by # of requests) I can see that some Memcache get take up to 30ms; I can't find a single use of Memcache get that returns in less than 10ms. More details on the system architecture: Currently we have four application servers each of which has a memcached member. All four memcached members participate in a memcache cluster. We're running on a cloud hosting provider and all traffic is running across the "internal" network (via "internal" IPs) When I ping from one application server to another the responses are in ~0.5ms Isn't 10ms a slow response time for Memcached? As far as I understand if you think "Memcache is too slow" then "you're doing it wrong". So am I doing it wrong? Here's the output of the memcache-top command: memcache-top v0.7 (default port: 11211, color: on, refresh: 3 seconds) INSTANCE USAGE HIT % CONN TIME EVICT/s GETS/s SETS/s READ/s WRITE/s cache1:11211 37.1% 62.7% 10 5.3ms 0.0 73 9 3958 84.6K cache2:11211 42.4% 60.8% 11 4.4ms 0.0 46 12 3848 62.2K cache3:11211 37.5% 66.5% 12 4.2ms 0.0 75 17 6056 170.4K AVERAGE: 39.0% 63.3% 11 4.6ms 0.0 64 13 4620 105.7K TOTAL: 0.1GB/ 0.4GB 33 13.9ms 0.0 193 38 13.5K 317.2K (ctrl-c to quit.) ** Here is the output of the top command on one machine: ** (Roughly the same on all cluster machines. As you can see there is very low CPU utilization, because these machines only run memcache.) top - 21:48:56 up 1 day, 4:56, 1 user, load average: 0.01, 0.06, 0.05 Tasks: 70 total, 1 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.3%st Mem: 501392k total, 424940k used, 76452k free, 66416k buffers Swap: 499996k total, 13064k used, 486932k free, 181168k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6519 nobody 20 0 384m 74m 880 S 1.0 15.3 18:22.97 memcached 3 root 20 0 0 0 0 S 0.3 0.0 0:38.03 ksoftirqd/0 1 root 20 0 24332 1552 776 S 0.0 0.3 0:00.56 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.62 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper ...output truncated...

  Read the article

• Abnormal hangs and restarts Ubuntu 8.04

  - by jai-ho

  Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

  Read the article

• Intermittently, IIS7 requests get stuck in WindowsAuthenticationModule

  - by rbeier

  Hi, We're running an IIS7 server hosting several dozen websites. Several of these websites are all part of the same legacy app we've developed. These sites all run the same code and run in the same app pool. Roughly once a month over the past few months, we've found that all requests for this app pool start hanging indefinitely. When this happens, we receive an alert and we recycle the app pool. After that, the sites start working again. This only ever affects this one app pool - never any others on the same server. A couple times, before recycling the pool, I've looked at the currently-executing requests in the worker process. They all show up as executing inside the WindowsAuthenticationModule. Which is strange, because the vast majority of the application does not require authentication. There is a small admin section which uses Windows auth... but all the other requests should be anonymous. Does anyone have any idea as to what might be causing this? There are several unusual things about the way these sites are set up. As I mentioned, they all run the same code - multiple sites point at the same physical directory. The only difference is the host header bindings. I'm not sure why there isn't just one site with all the host headers, but that's how it works. In several of these sites, the same physical directory is mapped at two levels - as the root of the site and again as an application within the site. So if a user goes to http://oursite.com/index.aspx, that maps to c:\files\oursite\index.aspx. If a user goes to http://oursite.com/foo/index.aspx, that also maps to c:\files\oursite\index.aspx. I think there is code which looks at the request URL and handles the two requests differently. This is strange because the same web.config ends up being interpreted as a site config file, and also as an application config file within the site. I don't know if this might be related to the authentication problem. If we can't find the cause, we're thinking of a few workarounds we could try: Move the admin section into a separate site, and give the client a new admin URL. Run that separate site in its own app pool. Then in the web.config shared by all the other sites, remove the WindowsAuthenticationModule. That way there should be no possibility of a hang within the WindowsAuthenticationModule. Try running all these sites in the classic pipeline instead of the integrated pipeline. They were working fine on our old IIS6 server... (If we get desperate) Set up a watchdog script which monitors the sites and auto-recycles the app pool when it detects that requests are getting stuck. What do you think? Thanks for your help, Richard

  Read the article

• Intermittently, IIS7 requests get stuck in WindowsAuthenticationModule

  - by Richard Beier

  We're running an IIS7 server hosting several dozen websites. Several of these websites are all part of the same legacy app we've developed. These sites all run the same code and run in the same app pool. Roughly once a month over the past few months, we've found that all requests for this app pool start hanging indefinitely. When this happens, we receive an alert and we recycle the app pool. After that, the sites start working again. This only ever affects this one app pool - never any others on the same server. A couple times, before recycling the pool, I've looked at the currently-executing requests in the worker process. They all show up as executing inside the WindowsAuthenticationModule. Which is strange, because the vast majority of the application does not require authentication. There is a small admin section which uses Windows auth... but all the other requests should be anonymous. Does anyone have any idea as to what might be causing this? There are several unusual things about the way these sites are set up. As I mentioned, they all run the same code - multiple sites point at the same physical directory. The only difference is the host header bindings. I'm not sure why there isn't just one site with all the host headers, but that's how it works. In several of these sites, the same physical directory is mapped at two levels - as the root of the site and again as an application within the site. So if a user goes to http://oursite.com/index.aspx, that maps to c:\files\oursite\index.aspx. If a user goes to http://oursite.com/foo/index.aspx, that also maps to c:\files\oursite\index.aspx. I think there is code which looks at the request URL and handles the two requests differently. This is strange because the same web.config ends up being interpreted as a site config file, and also as an application config file within the site. I don't know if this might be related to the authentication problem. If we can't find the cause, we're thinking of a few workarounds we could try: Move the admin section into a separate site, and give the client a new admin URL. Run that separate site in its own app pool. Then in the web.config shared by all the other sites, remove the WindowsAuthenticationModule. That way there should be no possibility of a hang within the WindowsAuthenticationModule. Try running all these sites in the classic pipeline instead of the integrated pipeline. They were working fine on our old IIS6 server... (If we get desperate) Set up a watchdog script which monitors the sites and auto-recycles the app pool when it detects that requests are getting stuck. What do you think? Thanks for your help, Richard

  Read the article

• Ubuntu Server 12.04 CPU Load

  - by zertux

  I have a Server (2x Hexa-Core Xeon E5649 2.53GHz w/HT with 32GB RAM and 20000 GB Bandwidth) running Ubuntu Server 12.04 LTS. The server runs LAMP and serves one website only, the estimated number of users is to be ~ 15,000 at the same time. At the moment i have around 2000 users online each of them runs 50 MySQL queries (small values mostly select and insert) from the beginning until the end of the session. Server CPU Load is high at this number of connections while the RAM usage is almost 1GB out of 32GB its worth mentioning that the server was running very fast with no problems at all but am concerned about the load average. http://s12.postimage.org/z7hi6mz3h/photo.png top - 03:02:43 up 9 min, 2 users, load average: 50.83, 30.14, 12.83 Tasks: 432 total, 1 running, 430 sleeping, 0 stopped, 1 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 66.5%id, 33.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32939992k total, 3111604k used, 29828388k free, 84108k buffers Swap: 2048280k total, 0k used, 2048280k free, 1621640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2860 root 20 0 25820 2288 1420 S 3 0.0 0:11.18 htop 1182 root 20 0 0 0 0 D 2 0.0 0:01.46 kjournald 1935 mysql 20 0 12.3g 161m 7924 S 1 0.5 102:31.45 mysqld 11 root 20 0 0 0 0 S 0 0.0 0:00.38 kworker/0:1 1822 www-data 20 0 247m 25m 4188 D 0 0.1 0:01.81 apache2 2920 www-data 20 0 0 0 0 Z 0 0.0 0:01.20 apache2 <defunct> 2942 www-data 20 0 247m 23m 3056 D 0 0.1 0:00.20 apache2 3516 www-data 20 0 247m 23m 3028 D 0 0.1 0:00.06 apache2 3521 www-data 20 0 247m 23m 3020 D 0 0.1 0:00.09 apache2 3664 www-data 20 0 247m 23m 3132 D 0 0.1 0:00.09 apache2 3674 www-data 20 0 247m 23m 3252 D 0 0.1 0:00.06 apache2 3713 www-data 20 0 247m 23m 3040 D 0 0.1 0:00.09 apache2 1 root 20 0 24328 2284 1344 S 0 0.0 0:03.09 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 root@server:~/codes# vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 19 0 0 29684012 86112 1689844 0 0 19 590 254 231 48 0 47 5 23 0 0 29704812 86128 1697672 0 0 4 320 11100 8121 77 1 22 0 33 0 0 29671044 86156 1705308 0 0 0 5440 13190 9140 95 1 4 0 33 3 0 29670088 86160 1706288 0 0 0 32932 12275 7297 99 0 1 0 35 0 0 29693456 86188 1710724 0 0 4 676 12701 7867 98 1 1 0 ^C I have not changed any of the default configurations that comes with Ubuntu. Is this load normal for such powerful server ? is there any optimization i can make to Apache/MySQL to minimize the load ? What do you recommend ?

  Read the article

• Android edtftpj/PRo SFTP heap worker problem

  - by Mr. Kakakuwa Bird

  Hi I am using edtftpj-pro3.1 trial copy in my android app to make SFTP connection with the server. After few connections with the server with 5-6 file transfers, my app is crashing with following exception. Is it causing the problem or what could be the problem?? I tried setParallelMode(false) in SSHFTPClient, but it is not working. Exception i'm getting is, 05-31 18:28:12.661: ERROR/dalvikvm(589): HeapWorker is wedged: 10173ms spent inside Lcom/enterprisedt/net/j2ssh/sftp/SftpFileInputStream;.finalize()V 05-31 18:28:12.661: INFO/dalvikvm(589): DALVIK THREADS: 05-31 18:28:12.661: INFO/dalvikvm(589): "main" prio=5 tid=3 WAIT 05-31 18:28:12.661: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4001b260 self=0xbd18 05-31 18:28:12.661: INFO/dalvikvm(589): | sysTid=589 nice=0 sched=0/0 cgrp=default handle=-1343993192 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.661: INFO/dalvikvm(589): - waiting on <0x122d70 (a android.os.MessageQueue) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:288) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.os.MessageQueue.next(MessageQueue.java:148) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.os.Looper.loop(Looper.java:110) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.app.ActivityThread.main(ActivityThread.java:4363) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.reflect.Method.invokeNative(Native Method) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.reflect.Method.invoke(Method.java:521) 05-31 18:28:12.661: INFO/dalvikvm(589): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 05-31 18:28:12.661: INFO/dalvikvm(589): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 05-31 18:28:12.661: INFO/dalvikvm(589): at dalvik.system.NativeStart.main(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): "Transport protocol 1" daemon prio=5 tid=29 NATIVE 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x44774768 self=0x3a7938 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=605 nice=0 sched=0/0 cgrp=default handle=3834600 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.platform.OSNetworkSystem.receiveStreamImpl(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.platform.OSNetworkSystem.receiveStream(OSNetworkSystem.java:478) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.PlainSocketImpl.read(PlainSocketImpl.java:565) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.SocketInputStream.read(SocketInputStream.java:87) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.SocketInputStream.read(SocketInputStream.java:67) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.fillbuf(BufferedInputStream.java:157) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.read(BufferedInputStream.java:346) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.read(BufferedInputStream.java:341) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.A.A((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.A.B((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.processMessages((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.startBinaryPacketProtocol((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.run((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "StreamFrameSender" prio=5 tid=27 TIMED_WAIT 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x44750a60 self=0x3964d8 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=603 nice=0 sched=0/0 cgrp=default handle=3761648 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): - waiting on <0x399478 (a com.corventis.gateway.ppp.StreamFrameSender) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:326) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.ppp.StreamFrameSender.run(StreamFrameSender.java:154) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "SftpActiveWorker" prio=5 tid=25 TIMED_WAIT 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447522b0 self=0x398e00 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=604 nice=0 sched=0/0 cgrp=default handle=3762704 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): - waiting on <0x3962d8 (a com.corventis.gateway.hostcommunicator.SftpActiveWorker) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:326) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.SftpActiveWorker.run(SftpActiveWorker.java:151) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "Thread-12" prio=5 tid=23 NATIVE 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4474aca8 self=0x115690 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=602 nice=0 sched=0/0 cgrp=default handle=878120 05-31 18:28:12.671: INFO/dalvikvm(589): at android.bluetooth.BluetoothSocket.acceptNative(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothSocket.accept(BluetoothSocket.java:287) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothServerSocket.accept(BluetoothServerSocket.java:105) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothServerSocket.accept(BluetoothServerSocket.java:91) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.bluetooth.BluetoothManager.openPort(BluetoothManager.java:215) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.bluetooth.BluetoothManager.open(BluetoothManager.java:84) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicator.open(PatchCommunicator.java:123) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicatorRunnable.run(PatchCommunicatorRunnable.java:134) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "HfGatewayApplication" prio=5 tid=21 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=0 dsCount=0 s=N obj=0x4472d9b0 self=0x120928 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=601 nice=0 sched=0/0 cgrp=default handle=1264672 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.Deflate.deflateInit2(Deflate.java:~1361) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.Deflate.deflateInit(Deflate.java:1316) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZStream.deflateInit(ZStream.java:127) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZStream.deflateInit(ZStream.java:120) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZOutputStream.(ZOutputStream.java:62) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.zipfile.ZipStorer.addStream(ZipStorer.java:211) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.zipfile.ZipStorer.createZip(ZipStorer.java:127) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicator.scanAndCompress(HostCommunicator.java:453) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicator.doWork(HostCommunicator.java:1434) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hf.HfGatewayApplication.doWork(HfGatewayApplication.java:621) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hf.HfGatewayApplication.run(HfGatewayApplication.java:546) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-10" prio=5 tid=19 TIMED_WAIT 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447287f8 self=0x1451b8 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=598 nice=0 sched=0/0 cgrp=default handle=1331920 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.VMThread.sleep(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.sleep(Thread.java:1306) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.sleep(Thread.java:1286) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.util.Watchdog.run(Watchdog.java:167) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-9" prio=5 tid=17 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=Y obj=0x44722c90 self=0x114e20 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=597 nice=0 sched=0/0 cgrp=default handle=1200048 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.time.Time.currentTimeMillis(Time.java:~77) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicatorState$1.run(PatchCommunicatorState.java:27) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-8" prio=5 tid=15 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=Y obj=0x44722430 self=0x124dd0 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=596 nice=0 sched=0/0 cgrp=default handle=1199848 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.time.Time.currentTimeMillis(Time.java:~80) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicatorState$1.run(HostCommunicatorState.java:35) 05-31 18:28:12.681: INFO/dalvikvm(589): "Binder Thread #2" prio=5 tid=13 NATIVE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4471ccc0 self=0x149b60 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=595 nice=0 sched=0/0 cgrp=default handle=1317992 05-31 18:28:12.681: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): "Binder Thread #1" prio=5 tid=11 NATIVE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447159a8 self=0x123298 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=594 nice=0 sched=0/0 cgrp=default handle=1164896 05-31 18:28:12.681: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "JDWP" daemon prio=5 tid=9 VMWAIT 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x4470f2a0 self=0x141a90 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=593 nice=0 sched=0/0 cgrp=default handle=1316864 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "Signal Catcher" daemon prio=5 tid=7 VMWAIT 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x4470f1e8 self=0x124970 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=592 nice=0 sched=0/0 cgrp=default handle=1316800 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "HeapWorker" daemon prio=5 tid=5 MONITOR 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x431b4550 self=0x141670 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=591 nice=0 sched=0/0 cgrp=default handle=1316400 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpSubsystemClient.closeHandle((null):~-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpSubsystemClient.closeFile((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFile.close((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFileInputStream.close((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFileInputStream.finalize((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: ERROR/dalvikvm(589): VM aborting 05-31 18:28:12.801: INFO/DEBUG(49): * ** * ** * ** * ** * ** * 05-31 18:28:12.801: INFO/DEBUG(49): Build fingerprint: 'google/passion/passion/mahimahi:2.1-update1/ERE27/24178:user/release-keys' 05-31 18:28:12.801: INFO/DEBUG(49): pid: 589, tid: 601 com.corventis.gateway.hf <<< 05-31 18:28:12.801: INFO/DEBUG(49): signal 11 (SIGSEGV), fault addr deadd00d 05-31 18:28:12.801: INFO/DEBUG(49): r0 00000026 r1 afe13329 r2 afe13329 r3 00000000 05-31 18:28:12.801: INFO/DEBUG(49): r4 ad081f50 r5 400091e8 r6 009b3a6a r7 00000000 05-31 18:28:12.801: INFO/DEBUG(49): r8 000002e8 r9 ad082ba0 10 ad082ba0 fp 00000000 05-31 18:28:12.801: INFO/DEBUG(49): ip deadd00d sp 46937c58 lr afe14373 pc ad035b4c cpsr 20000030 05-31 18:28:12.851: INFO/DEBUG(49): #00 pc 00035b4c /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #01 pc 00044d7c /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #02 pc 000162e4 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #03 pc 00016b60 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #04 pc 00016ce0 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #05 pc 00057b64 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #06 pc 00057cc0 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #07 pc 00057dd4 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #08 pc 00012ffc /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #09 pc 00019338 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #10 pc 00018804 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #11 pc 0004eed0 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #12 pc 0004eef8 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #13 pc 000426d4 /system/lib/libdvm.so 05-31 18:28:12.881: INFO/DEBUG(49): #14 pc 0000fd74 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): #15 pc 0000f840 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): code around pc: 05-31 18:28:12.881: INFO/DEBUG(49): ad035b3c 58234808 b1036b9b f8df4798 2026c01c 05-31 18:28:12.881: INFO/DEBUG(49): ad035b4c 0000f88c ef52f7d8 0004c428 fffe631c 05-31 18:28:12.881: INFO/DEBUG(49): ad035b5c fffe94f4 000002f8 deadd00d f8dfb40e 05-31 18:28:12.881: INFO/DEBUG(49): code around lr: 05-31 18:28:12.881: INFO/DEBUG(49): afe14360 686768a5 f9b5e008 b120000c 46289201 05-31 18:28:12.881: INFO/DEBUG(49): afe14370 9a014790 35544306 37fff117 6824d5f3 05-31 18:28:12.881: INFO/DEBUG(49): afe14380 d1ed2c00 bdfe4630 00026ab0 000000b4 05-31 18:28:12.881: INFO/DEBUG(49): stack: 05-31 18:28:12.881: INFO/DEBUG(49): 46937c18 00000015 05-31 18:28:12.881: INFO/DEBUG(49): 46937c1c afe13359 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): 46937c20 afe3b02c /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c24 afe3afd8 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c28 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c2c afe14373 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c30 afe13329 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c34 afe13329 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c38 afe13380 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c3c ad081f50 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c40 400091e8 /dev/ashmem/mspace/dalvik-heap/zygote/0 (deleted) 05-31 18:28:12.891: INFO/DEBUG(49): 46937c44 009b3a6a 05-31 18:28:12.891: INFO/DEBUG(49): 46937c48 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c4c afe1338d /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c50 df002777 05-31 18:28:12.891: INFO/DEBUG(49): 46937c54 e3a070ad 05-31 18:28:12.891: INFO/DEBUG(49): #00 46937c58 ad06f573 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c5c ad044d81 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): #01 46937c60 000027bd 05-31 18:28:12.891: INFO/DEBUG(49): 46937c64 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c68 463b6ab4 /data/dalvik-cache/data@[email protected]@classes.dex 05-31 18:28:12.891: INFO/DEBUG(49): 46937c6c 463d1ecf /data/dalvik-cache/data@[email protected]@classes.dex 05-31 18:28:12.891: INFO/DEBUG(49): 46937c70 00140450 [heap] 05-31 18:28:12.891: INFO/DEBUG(49): 46937c74 ad041d2b /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c78 ad082f2c /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c7c ad06826c /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c80 00140450 [heap] 05-31 18:28:12.891: INFO/DEBUG(49): 46937c84 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c88 000002f8 05-31 18:28:12.891: INFO/DEBUG(49): 46937c8c 400091e8 /dev/ashmem/mspace/dalvik-heap/zygote/0 (deleted) 05-31 18:28:12.891: INFO/DEBUG(49): 46937c90 ad081f50 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c94 000002f8 05-31 18:28:12.891: INFO/DEBUG(49): 46937c98 00002710 05-31 18:28:12.891: INFO/DEBUG(49): 46937c9c ad0162e8 /system/lib/libdvm.so Thanks & Regards,

  Read the article

• Count seconds and minutes with MCU timer/interrupt?

  - by arynhard

  I am trying to figure out how to create a timer for my C8051F020 MCU. The following code uses the value passed to init_Timer2() with the following formula: 65535-(0.1 / (12/2000000)=48868. I set up the timer to count every time it executes and for every 10 counts, count one second. This is based on the above formula. 48868 when passed to init_Timer2 will produce a 0.1 second delay. It would take ten of them per second. However, when I test the timer it is a little fast. At ten seconds the timer reports 11 seconds, at 20 seconds the timer reports 22 seconds. I would like to get as close to a perfect second as I can. Here is my code: #include <compiler_defs.h> #include <C8051F020_defs.h> void init_Clock(void); void init_Watchdog(void); void init_Ports(void); void init_Timer2(unsigned int counts); void start_Timer2(void); void timer2_ISR(void); unsigned int timer2_Count; unsigned int seconds; unsigned int minutes; int main(void) { init_Clock(); init_Watchdog(); init_Ports(); start_Timer2(); P5 &= 0xFF; while (1); } //============================================================= //Functions //============================================================= void init_Clock(void) { OSCICN = 0x04; //2Mhz //OSCICN = 0x07; //16Mhz } void init_Watchdog(void) { //Disable watchdog timer WDTCN = 0xDE; WDTCN = 0xAD; } void init_Ports(void) { XBR0 = 0x00; XBR1 = 0x00; XBR2 = 0x40; P0 = 0x00; P0MDOUT = 0x00; P5 = 0x00; //Set P5 to 1111 P74OUT = 0x08; //Set P5 4 - 7 (LEDs) to push pull (Output) } void init_Timer2(unsigned int counts) { CKCON = 0x00; //Set all timers to system clock divided by 12 T2CON = 0x00; //Set timer 2 to timer mode RCAP2 = counts; T2 = 0xFFFF; //655535 IE |= 0x20; //Enable timer 2 T2CON |= 0x04; //Start timer 2 } void start_Timer2(void) { EA = 0; init_Timer2(48868); EA = 1; } void timer2_ISR(void) interrupt 5 { T2CON &= ~(0x80); P5 ^= 0xF0; timer2_Count++; if(timer2_Count % 10 == 0) { seconds++; } if(seconds % 60 == 0 && seconds != 0) { minutes++; } }

  Read the article

• Why would VMWare to go defunct? How to recover from/prevent it?

  - by Josh

  I am running VMWare Server 2.0.2 (Build 203138) on a dual core Intel i5 with Ubuntu Server 10.04 LTS system (kernel 2.6.32-22-server #33-Ubuntu SMP). Disk Subsystem is a software RAID5 array. The system has been set up for a little over a week. For the past 5 days I have been running at leat 3 VMs (Linux and a variety of Windows OSes) with no issues whatsoever. But while I was installing Linux onto a new VM, suddenly all VMs became unresponsive, including the one I was installing to. I could not log in to the VMWare Management Interface, and the system was somewhat unresponsive via SSH. When I looked at top, I saw: top - 16:14:51 up 6 days, 1:49, 8 users, load average: 24.29, 24.33 17.54 Tasks: 203 total, 7 running, 195 sleeping, 0 stopped, 1 zombie Cpu(s): 0.2%us, 25.6%sy, 0.0%ni, 74.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8056656k total, 5927580k used, 2129076k free, 20320k buffers Swap: 7811064k total, 240216k used, 7570848k free, 5045884k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 21549 root 39 19 0 0 0 Z 100 0.0 15:02.44 [vmware-vmx] <defunct> 2115 root 20 0 0 0 0 S 1 0.0 170:32.08 [vmware-rtc] 2231 root 21 1 1494m 126m 100m S 1 1.6 892:58.05 /usr/lib/vmware/bin/vmware-vmx -# product=2; 2280 jnet 20 0 19320 1164 800 R 0 0.0 30:04.55 top 12236 root 20 0 833m 41m 34m S 0 0.5 88:34.24 /usr/lib/vmware/bin/vmware-vmx -# product=2; 1 root 20 0 23704 1476 920 S 0 0.0 0:00.80 /sbin/init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 [kthreadd] 3 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/0] 4 root 20 0 0 0 0 S 0 0.0 0:00.84 [ksoftirqd/0] 5 root RT 0 0 0 0 S 0 0.0 0:00.00 [watchdog/0] 6 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/1] The VMWare process for the virtual machine I was installing into became a zombie. Yet, it was still consuming 100% of the CPU time on one of the cores, and I couldn't reach it or any other virtual machines. (I was logged in to one virtual machine over SSH, another via X11, and a third via VNC. All three connections died). When I ran ps -ef and similar commands, I found that the defunct vmware-vmx process had it's parent PID set to init (1). I also used lsof -p 21549 and found that the defunct process had no open files. Yet it was using 100% of CPU time... I was unable to kill any vmware-vmx processes, including the defunct one, even with kill -9. As a last resort to resolve the situation I tried to reboot the box, however shutdown, halt, reboot, and init 6 all failed to reboot/shutdown, even when given appropriate --force settings. ControlAltDel produced a message about rebooting on the console, but the system would not reboot. I had to hard power-cycle the box to resolve the situation. (See my other question, Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?) What would cause a scenario like this? What else could I have done to resolve it besides a hard reboot? What can I do to prevent such a situation in the future?

  Read the article

• Can't configure frame relay T1 on Cisco 1760

  - by sonar

  For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

  Read the article

• Randomly displayed flashing lines, no response to all shortcuts, just power off. [syslog included]

  - by B. Roland

  Hello! I have an old machine, and I want to use for that to learn employees how to use Ubuntu, and to be easyer to switch from Windows. I've been installed 10.04, and updated, but this strange stuff is happend. Graphical installion failed, same strange thing. With alternate workd. Sometimes, when I boot up, a boot message displayed: Keyboard failure..., often diplayed after reboot, and after shutdown, when I haven't plugged off from AC. I replaced the keyboard yet, same failure... If I powered off, and plugged off from AC, no keyboard problems displayed in boot time. Details Configuration: Dell OptiPlex GX60 - in original cover, no changes. 256 MB DDR 166 MHz Intel® Celeron® Processor 2.40 GHz Dell 0C3207 Base Board I know, that is not enough, but I have three other Nec compuers, with nearly similar config, and they works well with 9.10, 10.04, 10.10. Live CDs I've been tried with 10.04 and 10.10, but the problem is displayed too. With 9.10 no strange things displayed, but it froze, during a simple apt-get install. Syslog An error loop is logged here, but I paste the whole startup and error lines. The flashing lines are displayed sometimes immediately after login, but sometimes after 10 minutes, but once occured, that nothing happend. Strange thing is displayed immediately after login: here. An other boot, after some minutes, strange lines, and loop in log appeard: here. The loop should be that: Jan 23 00:20:08 machine_name kernel: [ 46.782212] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 23 00:20:08 machine_name kernel: [ 47.100033] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 23 00:20:08 machine_name kernel: [ 47.100045] render error detected, EIR: 0x00000000 Jan 23 00:20:08 machine_name kernel: [ 47.101487] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 16 at 9) Jan 23 00:20:11 machine_name kernel: [ 49.152020] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 23 00:20:11 machine_name gdm-simple-slave[1245]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Jan 23 00:20:11 machine_name acpid: client 1239[0:0] has disconnected Jan 23 00:20:11 machine_name acpid: client connected from 1247[0:0] Jan 23 00:20:11 machine_name acpid: 1 client rule loaded UPDATE Added syslog things: before errors, error loop, the complete shutdown(after the big updates): Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully called chroot. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully dropped privileges. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully limited resources. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Watchdog thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Canary thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully made thread 1337 of process 1337 (n/a) owned by '1001' high priority at nice level -11. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Supervising 1 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1345 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 2 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1349 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 3 threads of 1 processes of 1 users. Jan 28 20:40:37 machine_name pulseaudio[1337]: ratelimit.c: 2 events suppressed Jan 28 20:41:33 machine_name AptDaemon: INFO: Initializing daemon Jan 28 20:41:44 machine_name kernel: [ 167.691563] lo: Disabled Privacy Extensions Jan 28 20:47:33 machine_name AptDaemon: INFO: Quiting due to inactivity Jan 28 20:47:33 machine_name AptDaemon: INFO: Shutdown was requested Jan 28 20:59:50 machine_name kernel: [ 1253.840513] lo: Disabled Privacy Extensions Jan 28 21:17:02 machine_name CRON[1874]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 21:17:38 machine_name kernel: [ 2321.553239] lo: Disabled Privacy Extensions Jan 28 22:07:44 machine_name kernel: [ 5327.840254] lo: Disabled Privacy Extensions Jan 28 22:17:02 machine_name CRON[2665]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 22:57:03 machine_name kernel: [ 8286.641472] lo: Disabled Privacy Extensions Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 23:07:42 machine_name kernel: [ 8925.272030] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:07:42 machine_name kernel: [ 8925.272048] render error detected, EIR: 0x00000000 Jan 28 23:07:42 machine_name kernel: [ 8925.272093] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171453 at 171452) Jan 28 23:07:45 machine_name kernel: [ 8928.868041] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:10 machine_name acpid: client 925[0:0] has disconnected Jan 28 23:08:10 machine_name acpid: client connected from 8127[0:0] Jan 28 23:08:10 machine_name acpid: 1 client rule loaded Jan 28 23:08:11 machine_name kernel: [ 8955.046248] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:12 machine_name kernel: [ 8955.364016] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:12 machine_name kernel: [ 8955.364027] render error detected, EIR: 0x00000000 Jan 28 23:08:12 machine_name kernel: [ 8955.364407] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171457 at 171452) Jan 28 23:08:14 machine_name kernel: [ 8957.472025] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:14 machine_name acpid: client 8127[0:0] has disconnected Jan 28 23:08:14 machine_name acpid: client connected from 8141[0:0] Jan 28 23:08:14 machine_name acpid: 1 client rule loaded Jan 28 23:08:15 machine_name kernel: [ 8958.671722] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:15 machine_name kernel: [ 8958.988015] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:15 machine_name kernel: [ 8958.988026] render error detected, EIR: 0x00000000 Jan 28 23:08:15 machine_name kernel: [ 8958.989400] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171459 at 171452) Jan 28 23:08:16 machine_name init: tty4 main process (848) killed by TERM signal Jan 28 23:08:16 machine_name init: tty5 main process (856) killed by TERM signal Jan 28 23:08:16 machine_name NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Jan 28 23:08:16 machine_name init: tty2 main process (874) killed by TERM signal Jan 28 23:08:16 machine_name init: tty3 main process (875) killed by TERM signal Jan 28 23:08:16 machine_name init: tty6 main process (877) killed by TERM signal Jan 28 23:08:16 machine_name init: cron main process (890) killed by TERM signal Jan 28 23:08:16 machine_name init: tty1 main process (1146) killed by TERM signal Jan 28 23:08:16 machine_name avahi-daemon[644]: Got SIGTERM, quitting. Jan 28 23:08:16 machine_name avahi-daemon[644]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.238.11.134. Jan 28 23:08:16 machine_name acpid: exiting Jan 28 23:08:16 machine_name init: avahi-daemon main process (644) terminated with status 255 Jan 28 23:08:17 machine_name kernel: Kernel logging (proc) stopped. Jan 28 23:09:00 machine_name kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 28 23:09:00 machine_name rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="516" x-info="http://www.rsyslog.com"] (re)start Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's groupid changed to 103 Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's userid changed to 101 Jan 28 23:09:00 machine_name rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] When I hit the On/Off button, the system shuts down normally. May be it a hardware problem, but I don't know... Can you say something useful to solve my problem?

  Read the article

• SQL Server Table Polling by Multiple Subscribers

  - by Daniel Hester

  Background Designing Stored Procedures that are safe for multiple subscribers (to call simultaneously) can be challenging.  For example let’s say that you want multiple worker processes to poll a shared work queue that’s encapsulated as a SQL Table. This is a common scenario and through experience you’ll find that you want to use Table Hints to prevent unwanted locking when performing simultaneous queries on the same table. There are three table hints to consider: NOLOCK, READPAST and UPDLOCK. Both NOLOCK and READPAST table hints allow you to SELECT from a table without placing a LOCK on that table. However, SELECTs with the READPAST hint will ignore any records that are locked due to being updated/inserted (or otherwise “dirty”), whereas a SELECT with NOLOCK ignores all locks including dirty reads. For the initial update of the flag (that marks the record as available for subscription) I don’t use the NOLOCK Table Hint because I want to be sensitive to the “active” records in the table and I want to exclude them.  I use an Update Lock (UPDLOCK) in conjunction with a WHERE clause that uses a sub-select with a READPAST Table Hint in order to explicitly lock the records I’m updating (UPDLOCK) but not place a lock on the table when selecting the records that I’m going to update (READPAST). UPDATES should be allowed to lock the rows affected because we’re probably changing a flag on a record so that it is not included in a SELECT from another subscriber. On the UPDATE statement we should explicitly use the UPDLOCK to guard against lock escalation. A SELECT to check for the next record(s) to process can result in a shared read lock being held by more than one subscriber polling the shared work queue (SQL table). It is expected that more than one worker process (or server) might try to process the same new record(s) at the same time. When each process then tries to obtain the update lock, none of them can because another process has a shared read lock in place. Thus without the UPDLOCK hint the result would be a lock escalation deadlock; however with the UPDLOCK hint this condition is mitigated against. Note that using the READPAST table hint requires that you also set the ISOLATION LEVEL of the transaction to be READ COMMITTED (rather than the default of SERIALIZABLE). Guidance In the Stored Procedure that returns records to the multiple subscribers: Perform the UPDATE first. Change the flag that makes the record available to subscribers.  Additionally, you may want to update a LastUpdated datetime field in order to be able to check for records that “got stuck” in an intermediate state or for other auditing purposes. In the UPDATE statement use the (UPDLOCK) Table Hint on the UPDATE statement to prevent lock escalation. In the UPDATE statement also use a WHERE Clause that uses a sub-select with a (READPAST) Table Hint to select the records that you’re going to update. In the UPDATE statement use the OUTPUT clause in conjunction with a Temporary Table to isolate the record(s) that you’ve just updated and intend to return to the subscriber. This is the fastest way to update the record(s) and to get the records’ identifiers within the same operation. Finally do a set-based SELECT on the main Table (using the Temporary Table to identify the records in the set) with either a READPAST or NOLOCK table hint.  Use NOLOCK if there are other processes (besides the multiple subscribers) that might be changing the data that you want to return to the multiple subscribers; or use READPAST if you're sure there are no other processes (besides the multiple subscribers) that might be updating column data in the table for other purposes (e.g. changes to a person’s last name).  NOLOCK is generally the better fit in this part of the scenario. See the following as an example: CREATE PROCEDURE [dbo].[usp_NewCustomersSelect] AS BEGIN -- OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON -- DECLARE TEMP TABLE -- Note that this example uses CustomerId as an identifier; -- you could just use the Identity column Id if that’s all you need. DECLARE @CustomersTempTable TABLE ( CustomerId NVARCHAR(255) ) -- PERFORM UPDATE FIRST -- [Customers] is the name of the table -- [Id] is the Identity Column on the table -- [CustomerId] is the business document key used to identify the -- record globally, i.e. in other systems or across SQL tables -- [Status] is INT or BIT field (if the status is a binary state) -- [LastUpdated] is a datetime field used to record the time of the -- last update UPDATE [Customers] WITH (UPDLOCK) SET [Status] = 1, [LastUpdated] = GETDATE() OUTPUT [INSERTED].[CustomerId] INTO @CustomersTempTable WHERE ([Id] = (SELECT TOP 100 [Id] FROM [Customers] WITH (READPAST) WHERE ([Status] = 0) ORDER BY [Id] ASC)) -- PERFORM SELECT FROM ENTITY TABLE SELECT [C].[CustomerId], [C].[FirstName], [C].[LastName], [C].[Address1], [C].[Address2], [C].[City], [C].[State], [C].[Zip], [C].[ShippingMethod], [C].[Id] FROM [Customers] AS [C] WITH (NOLOCK), @CustomersTempTable AS [TEMP] WHERE ([C].[CustomerId] = [TEMP].[CustomerId]) END In a system that has been designed to have multiple status values for records that need to be processed in the Work Queue it is necessary to have a “Watch Dog” process by which “stale” records in intermediate states (such as “In Progress”) are detected, i.e. a [Status] of 0 = New or Unprocessed; a [Status] of 1 = In Progress; a [Status] of 2 = Processed; etc.. Thus, if you have a business rule that states that the application should only process new records if all of the old records have been processed successfully (or marked as an error), then it will be necessary to build a monitoring process to detect stalled or stale records in the Work Queue, hence the use of the LastUpdated column in the example above. The Status field along with the LastUpdated field can be used as the criteria to detect stalled / stale records. It is possible to put this watchdog logic into the stored procedure above, but I would recommend making it a separate monitoring function. In writing the stored procedure that checks for stale records I would recommend using the same kind of lock semantics as suggested above. The example below looks for records that have been in the “In Progress” state ([Status] = 1) for greater than 60 seconds: CREATE PROCEDURE [dbo].[usp_NewCustomersWatchDog] AS BEGIN -- TO OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON DECLARE @MaxWait int; SET @MaxWait = 60 IF EXISTS (SELECT 1 FROM [dbo].[Customers] WITH (READPAST) WHERE ([Status] = 1) AND (DATEDIFF(s, [LastUpdated], GETDATE()) > @MaxWait)) BEGIN SELECT 1 AS [IsWatchDogError] END ELSE BEGIN SELECT 0 AS [IsWatchDogError] END END Downloads The zip file below contains two SQL scripts: one to create a sample database with the above stored procedures and one to populate the sample database with 10,000 sample records.  I am very grateful to Red-Gate software for their excellent SQL Data Generator tool which enabled me to create these sample records in no time at all. References http://msdn.microsoft.com/en-us/library/ms187373.aspx http://www.techrepublic.com/article/using-nolock-and-readpast-table-hints-in-sql-server/6185492 http://geekswithblogs.net/gwiele/archive/2004/11/25/15974.aspx http://grounding.co.za/blogs/romiko/archive/2009/03/09/biztalk-sql-receive-location-deadlocks-dirty-reads-and-isolation-levels.aspx

  Read the article

• Plesk 11: install Apache with SNI support

  - by Ueli

  If I try to update from standard Apache to Apache with SNI support with the Plesk installation program (example.com:8447), I get an error, that I have to remove apr-util-ldap-1.4.1-1.el5.x86_64 It's in german: Informationen über installierte Pakete abrufen... Installation started in background Datei wird heruntergeladen PSA_11.0.9/dist-rpm-CentOS-5-x86_64/build-11.0.9-cos5-x86_64.hdr.gz: 11%..20%..30%..40%..50%..60%..70%..81%..91%..100% fertig. Datei wird heruntergeladen PSA_11.0.9/update-rpm-CentOS-5-x86_64/update-11.0.9-cos5-x86_64.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% fertig. Datei wird heruntergeladen PSA_11.0.9/thirdparty-rpm-CentOS-5-x86_64/thirdparty-11.0.9-cos5-x86_64.hdr.gz: 10%..26%..43%..77%..100% fertig. Datei wird heruntergeladen BILLING_11.0.9/thirdparty-rpm-RedHat-all-all/thirdparty-11.0.9-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen BILLING_11.0.9/update-rpm-RedHat-all-all/update-11.0.9-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/thirdparty-rpm-RedHat-all-all/thirdparty-11.0.10-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/dist-rpm-RedHat-all-all/build-11.0.10-rhall-all.hdr.gz: 10%..22%..31%..41%..51%..65%..70%..80%..90%..100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/update-rpm-RedHat-all-all/update-11.0.10-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen APACHE_2.2.22/thirdparty-rpm-CentOS-5-x86_64/thirdparty-2.2.22-rh5-x86_64.hdr.gz: 19%..25%..35%..83%..93%..100% fertig. Datei wird heruntergeladen APACHE_2.2.22/update-rpm-CentOS-5-x86_64/update-2.2.22-rh5-x86_64.hdr.gz: 100% fertig. Datei wird heruntergeladen BILLING_11.0.9/dist-rpm-RedHat-all-all/build-11.0.9-rhall-all.hdr.gz: 11%..23%..31%..41%..52%..62%..73%..83%..91%..100% fertig. Datei wird heruntergeladen APACHE_2.2.22/dist-rpm-CentOS-5-x86_64/build-2.2.22-rh5-x86_64.hdr.gz: 36%..50%..100% fertig. Pakete, die installiert werden müssen, werden ermittelt. -> Error: Mit der Installation kann erst fortgefahren werden, wenn das Paket apr-util-ldap-1.4.1-1.el5.x86_64 vom System entfernt wird. Es wurden nicht alle Pakete installiert. Bitte beheben Sie dieses Problem und versuchen Sie, die Pakete erneut zu installieren. Wenn Sie das Problem nicht selbst beheben können, wenden Sie sich bitte an den technischen Support. - «Error: The installation can be continued only if the package apr-util-ldap-1.4.1-1.el5.x86_64 is removed from the system» But I can't uninstall apr-util-ldap-1.4.1-1.el5.x86_64 without removing a lot of important packages: Dependencies Resolved ========================================================================================================================================= Package Arch Version Repository Size ========================================================================================================================================= Removing: apr-util-ldap x86_64 1.4.1-1.el5 installed 9.0 k Removing for dependencies: SSHTerm noarch 0.2.2-10.12012310 installed 4.9 M awstats noarch 7.0-11122114.swsoft installed 3.5 M httpd x86_64 2.2.23-3.el5 installed 3.4 M mailman x86_64 3:2.1.9-6.el5_6.1 installed 34 M mod-spdy-beta x86_64 0.9.3.3-386 installed 2.4 M mod_perl x86_64 2.0.4-6.el5 installed 6.8 M mod_python x86_64 3.2.8-3.1 installed 1.2 M mod_ssl x86_64 1:2.2.23-3.el5 installed 179 k perl-Apache-ASP x86_64 2.59-0.93298 installed 543 k php53 x86_64 5.3.3-13.el5_8 installed 3.4 M php53-sqlite2 x86_64 5.3.2-11041315 installed 366 k plesk-core x86_64 11.0.9-cos5.build110120608.16 installed 79 M plesk-l10n noarch 11.0.9-cos5.build110120827.16 installed 21 M pp-sitebuilder noarch 11.0.10-38572.12072100 installed 181 M psa x86_64 11.0.9-cos5.build110120608.16 installed 473 k psa-awstats-configurator noarch 11.0.9-cos5.build110120606.19 installed 0.0 psa-backup-manager x86_64 11.0.9-cos5.build110120608.16 installed 8.6 M psa-backup-manager-vz x86_64 11.0.0-cos5.build110120123.10 installed 1.6 k psa-fileserver x86_64 11.0.9-cos5.build110120608.16 installed 364 k psa-firewall x86_64 11.0.9-cos5.build110120608.16 installed 550 k psa-health-monitor noarch 11.0.9-cos5.build110120606.19 installed 2.3 k psa-horde noarch 3.3.13-cos5.build110120606.19 installed 20 M psa-hotfix1-9.3.0 x86_64 9.3.0-cos5.build93100518.16 installed 23 k psa-imp noarch 4.3.11-cos5.build110120606.19 installed 12 M psa-ingo noarch 1.2.6-cos5.build110120606.19 installed 5.1 M psa-kronolith noarch 2.3.6-cos5.build110120606.19 installed 6.3 M psa-libxml-proxy x86_64 2.7.8-0.301910 installed 1.2 M psa-mailman-configurator x86_64 11.0.9-cos5.build110120608.16 installed 5.5 k psa-migration-agents x86_64 11.0.9-cos5.build110120608.16 installed 169 k psa-migration-manager x86_64 11.0.9-cos5.build110120608.16 installed 1.1 M psa-mimp noarch 1.1.4-cos5.build110120418.19 installed 2.9 M psa-miva x86_64 1:5.06-cos5.build1013111101.14 installed 4.5 M psa-mnemo noarch 2.2.5-cos5.build110120606.19 installed 4.1 M psa-mod-fcgid-configurator x86_64 2.0.0-cos5.build1013111101.14 installed 0.0 psa-mod_aclr2 x86_64 12021319-9e86c2f installed 8.1 k psa-mod_fcgid x86_64 2.3.6-12050315 installed 222 k psa-mod_rpaf x86_64 0.6-12021310 installed 7.7 k psa-passwd noarch 3.1.3-cos5.build1013111101.14 installed 3.7 M psa-php53-configurator x86_64 1.6.2-cos5.build110120608.16 installed 6.4 k psa-rubyrails-configurator x86_64 1.1.6-cos5.build1013111101.14 installed 0.0 psa-spamassassin x86_64 11.0.9-cos5.build110120608.16 installed 167 k psa-turba noarch 2.3.6-cos5.build110120606.19 installed 6.1 M psa-updates noarch 11.0.9-cos5.build110120704.10 installed 0.0 psa-vhost noarch 11.0.9-cos5.build110120606.19 installed 160 k psa-vpn x86_64 11.0.9-cos5.build110120608.16 installed 1.9 M psa-watchdog x86_64 11.0.9-cos5.build110120608.16 installed 2.9 M webalizer x86_64 2.01_10-30.1 installed 259 k Transaction Summary ========================================================================================================================================= Remove 48 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) What should I do?

  Read the article

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• CodePlex Daily Summary for Saturday, March 24, 2012

  CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

  Read the article

• How to debug a native Java crash on Linux?

  - by Paul J. Lucas

  I've seen this question and this article on how to debug a native Java crash. The article is with respect to Windows. What are the equivalent debugging aids on Linux? Note: All I have is this crash log from a user in the field. I do not have access to the machine on which the crash occurred. Update: I am pretty sure the crash is due to JNI code we have. I never meant to imply that it was the JVM itself that was faulty. Per request, here is the crash dump (or as much of it as will fit in the 30K stackoverflow limit): # # An unexpected error has been detected by Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x06300e76, pid=9983, tid=4106996592 # # Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing) # Problematic frame: # V [libjvm.so+0x300e76] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # --------------- T H R E A D --------------- Current thread (0x0922e000): VMThread [id=9985] siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x00000008 Registers: EAX=0x00000008, EBX=0x88a829b3, ECX=0x88a829b0, EDX=0xa7d6c1dc ESP=0xf4cbba5c, EBP=0xf4cbba68, ESI=0xa7d6d1d8, EDI=0x00000404 EIP=0x06300e76, CR2=0x00000008, EFLAGS=0x00010202 Top of Stack: (sp=0xf4cbba5c) 0xf4cbba5c: a7d6c1c8 0920cc30 aa0de5c0 f4cbba98 0xf4cbba6c: 063517d7 cf8f2a20 a7d6c1c8 0920cc30 0xf4cbba7c: 0920cc30 00000000 00000000 6d224c40 0xf4cbba8c: 00000001 f4cbbbb0 0920b440 f4cbbab8 0xf4cbba9c: 061dd4df 0920cc30 f4cbbb10 f4cbbac8 0xf4cbbaac: 0633cb7e 0643b5b8 f4492968 f4cbbad8 0xf4cbbabc: 061dcd68 f4cbbaf0 0920cc30 f4cbbaf8 0xf4cbbacc: 061df31e f4cbbb10 d4cbcc2c f4cbbb08 Instructions: (pc=0x06300e76) 0x06300e66: 82 39 f2 73 34 90 8d 74 26 00 8b 02 85 c0 74 22 0x06300e76: 8b 18 80 3d 45 10 42 06 00 74 0c 89 d8 31 c9 83 Stack: [0xf4c3c000,0xf4cbd000), sp=0xf4cbba5c, free space=510k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [libjvm.so+0x300e76] V [libjvm.so+0x3517d7] V [libjvm.so+0x1dd4df] V [libjvm.so+0x1dcd68] V [libjvm.so+0x1dc3cc] V [libjvm.so+0x1d4c52] V [libjvm.so+0x1d32cc] V [libjvm.so+0x1d4229] V [libjvm.so+0x1dc82a] V [libjvm.so+0x1d1d34] V [libjvm.so+0x186125] V [libjvm.so+0x1d20bc] V [libjvm.so+0x3b2cbe] V [libjvm.so+0x3c5037] V [libjvm.so+0x3c46bc] V [libjvm.so+0x3c488a] V [libjvm.so+0x3c446f] V [libjvm.so+0x30b719] C [libpthread.so.0+0x5cb2] VM_Operation (0xf2b60728): generation collection for allocation, mode: safepoint, requested by thread 0x09449c00 --------------- P R O C E S S --------------- Java Threads: ( = current thread ) 0x092afc00 JavaThread "RawImageCache" daemon [_thread_blocked, id=10026] 0xf37d1000 JavaThread "TimerQueue" daemon [_thread_blocked, id=10022] 0x09410000 JavaThread "SunTileScheduler0Standard7" daemon [_thread_blocked, id=10021] 0x0940f000 JavaThread "SunTileScheduler0Standard6" daemon [_thread_blocked, id=10020] 0x0946fc00 JavaThread "SunTileScheduler0Standard5" daemon [_thread_blocked, id=10019] 0x0946e800 JavaThread "SunTileScheduler0Standard4" daemon [_thread_blocked, id=10018] 0x0946d400 JavaThread "SunTileScheduler0Standard3" daemon [_thread_blocked, id=10017] 0x0946c000 JavaThread "SunTileScheduler0Standard2" daemon [_thread_blocked, id=10016] 0x0946ac00 JavaThread "SunTileScheduler0Standard1" daemon [_thread_blocked, id=10015] 0x0946a000 JavaThread "SunTileScheduler0Standard0" daemon [_thread_blocked, id=10014] 0x0944a800 JavaThread "Image List Poller" [_thread_blocked, id=10012] 0x09449c00 JavaThread "Image Task Queue" [_thread_blocked, id=10011] 0xf37e3c00 JavaThread "Laf-Widget fade tracker" [_thread_blocked, id=10010] 0x094abc00 JavaThread "FileCacheMonitor" daemon [_thread_blocked, id=10009] 0xf37e3800 JavaThread "DestroyJavaVM" [_thread_blocked, id=9984] 0xf37ee400 JavaThread "Thread-6" daemon [_thread_blocked, id=10006] 0xf3a7c800 JavaThread "DirectoryMonitor.MonitorThread" daemon [_thread_blocked, id=10005] 0xf3a73800 JavaThread "AWT Watchdog" daemon [_thread_blocked, id=10004] 0xf3adb800 JavaThread "TileReaper" daemon [_thread_blocked, id=10003] 0x093c3c00 JavaThread "process reaper" daemon [_thread_in_native, id=10001] 0x093ac800 JavaThread "Timer-0" daemon [_thread_blocked, id=9999] 0x093a8c00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=9997] 0x093a8000 JavaThread "AWT-Shutdown" [_thread_blocked, id=9996] 0x09378c00 JavaThread "AWT-XAWT" daemon [_thread_blocked, id=9994] 0x09368400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=9993] 0x09350000 JavaThread "Thread-1" daemon [_thread_blocked, id=9992] 0x0923b400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=9990] 0x09239c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=9989] 0x09238800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=9988] 0x09230800 JavaThread "Finalizer" daemon [_thread_blocked, id=9987] 0x0922f400 JavaThread "Reference Handler" daemon [_thread_blocked, id=9986] Other Threads: =0x0922e000 VMThread [id=9985] 0x09245000 WatcherThread [id=9991] VM state:at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event]) [0x09205178/0x092051a0] Threads_lock - owner thread: 0x0922e000 [0x09205638/0x09205650] Heap_lock - owner thread: 0x09449c00 Heap def new generation total 83968K, used 9280K [0x55600000, 0x5b110000, 0x5ec40000) eden space 74688K, 0% used [0x55600000, 0x55600000, 0x59ef0000) from space 9280K, 100% used [0x5a800000, 0x5b110000, 0x5b110000) to space 9280K, 0% used [0x59ef0000, 0x59ef0000, 0x5a800000) tenured generation total 1233640K, used 1233529K [0x5ec40000, 0xaa0fa000, 0xcf800000) the space 1233640K, 99% used [0x5ec40000, 0xaa0de5c0, 0x8b4af400, 0xaa0fa000) compacting perm gen total 13312K, used 13175K [0xcf800000, 0xd0500000, 0xd3800000) the space 13312K, 98% used [0xcf800000, 0xd04ddd70, 0xd04dde00, 0xd0500000) ro space 8192K, 69% used [0xd3800000, 0xd3d8f608, 0xd3d8f800, 0xd4000000) rw space 12288K, 57% used [0xd4000000, 0xd46eee98, 0xd46ef000, 0xd4c00000) Dynamic libraries: [ snip ] VM Arguments: jvm_args: -Dinstall4j.jvmDir=/home/berbmit/bin/LightZone/jre -Dinstall4j.appDir=/home/berbmit/bin/LightZone -Dexe4j.moduleName=/home/berbmit/bin/LightZone/LightZone -Dcom.lightcrafts.licensetype=ESD -Xmx2000000k java_command: com.install4j.runtime.Launcher launch com.lightcrafts.platform.linux.LinuxLauncher true false /home/berbmit/bin/LightZone/LightZone.log /home/berbmit/bin/LightZone/LightZone.log false true false true true -1 -1 20 20 Arial 0,0,0 8 500 20 40 Arial 0,0,0 8 500 -1 Launcher Type: SUN_STANDARD Environment Variables: PATH=/home/berbmit/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=berbmit LD_LIBRARY_PATH=/home/berbmit/bin/LightZone/jre/lib/i386/client:/home/berbmit/bin/LightZone/jre/lib/i386:/home/berbmit/bin/LightZone/jre/../lib/i386:/home/berbmit/bin/LightZone/.: SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: SIGSEGV: [libjvm.so+0x3b29c0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGBUS: [libjvm.so+0x3b29c0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGFPE: [libjvm.so+0x309ec0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGILL: [libjvm.so+0x309ec0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGUSR2: [libjvm.so+0x30bef0], sa_mask[0]=0x00000000, sa_flags=0x10000004 SIGHUP: [libjvm.so+0x30b910], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGINT: [libjvm.so+0x30b910], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGQUIT: [libjvm.so+0x30b910], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGTERM: [libjvm.so+0x30b910], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGUSR2: [libjvm.so+0x30bef0], sa_mask[0]=0x00000000, sa_flags=0x10000004 --------------- S Y S T E M --------------- OS:squeeze/sid uname:Linux 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.67 0.54 0.36 CPU:total 8 (8 cores per cpu, 2 threads per core) family 6 model 10 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, ht Memory: 4k page, physical 8191552k(3359308k free), swap 1016828k(1016828k free) vm_info: Java HotSpot(TM) Client VM (1.6.0_03-b05) for linux-x86, built on Sep 24 2007 22:45:46 by "java_re" with gcc 3.2.1-7a (J2SE release)

  Read the article

• Drupal: Create custom search

  - by Dr. Hfuhruhurr

  I'm trying to create a custom search but getting stuck. What I want is to have a dropdownbox so the user can choose where to search in. These options can mean 1 or more content types. So if he chooses options A, then the search will look in node-type P,Q,R. But he may not give those results, but only the uid's which will be then themed to gather specific data for that user. To make it a little bit clearer, Suppose I want to llok for people. The what I'm searching in is 2 content profile types. But ofcourse you dont want to display those as a result, but a nice picture of the user and some data. I started with creating a form with a textfield and the dropdown box. Then, in the submit handler, i created the keys and redirected to another pages with those keys as a tail. This page has been defined in the menu hook, just like how search does it. After that I want to call hook_view to do the actual search by calling node_search, and give back the results. Unfortunately, it goes wrong. When i click the Search button, it gives me a 404. But am I on the right track? Is this the way to create a custom search? Thx for your help. Here's the code for some clarity: <?php // $Id$ /* * @file * Searches on Project, Person, Portfolio or Group. */ /** * returns an array of menu items * @return array of menu items */ function vm_search_menu() { $subjects = _vm_search_get_subjects(); foreach ($subjects as $name => $description) { $items['zoek/'. $name .'/%menu_tail'] = array( 'page callback' => 'vm_search_view', 'page arguments' => array($name), 'type' => MENU_LOCAL_TASK, ); } return $items; } /** * create a block to put the form into. * @param $op * @param $delta * @param $edit * @return mixed */ function vm_search_block($op = 'list', $delta = 0, $edit = array()) { switch ($op) { case 'list': $blocks[0]['info'] = t('Algemene zoek'); return $blocks; case 'view': if (0 == $delta) { $block['subject'] = t(''); $block['content'] = drupal_get_form('vm_search_general_form'); } return $block; } } /** * Define the form. */ function vm_search_general_form() { $subjects = _vm_search_get_subjects(); foreach ($subjects as $key => $subject) { $options[$key] = $subject['desc']; } $form['subjects'] = array( '#type' => 'select', '#options' => $options, '#required' => TRUE, ); $form['keys'] = array( '#type' => 'textfield', '#required' => TRUE, ); $form['submit'] = array( '#type' => 'submit', '#value' => t('Zoek'), ); return $form; } function vm_search_general_form_submit($form, &$form_state) { $subjects = _vm_search_get_subjects(); $keys = $form_state['values']['keys']; //the search keys //the content types to search in $keys .= ' type:' . implode(',', $subjects[$form_state['values']['subjects']]['types']); //redirect to the page, where vm_search_view will handle the actual search $form_state['redirect'] = 'zoek/'. $form_state['values']['subjects'] .'/'. $keys; } /** * Menu callback; presents the search results. */ function vm_search_view($type = 'node') { // Search form submits with POST but redirects to GET. This way we can keep // the search query URL clean as a whistle: // search/type/keyword+keyword if (!isset($_POST['form_id'])) { if ($type == '') { // Note: search/node can not be a default tab because it would take on the // path of its parent (search). It would prevent remembering keywords when // switching tabs. This is why we drupal_goto to it from the parent instead. drupal_goto($front_page); } $keys = search_get_keys(); // Only perform search if there is non-whitespace search term: $results = ''; if (trim($keys)) { // Log the search keys: watchdog('vm_search', '%keys (@type).', array('%keys' => $keys, '@type' => $type)); // Collect the search results: $results = node_search('search', $type); if ($results) { $results = theme('box', t('Zoek resultaten'), $results); } else { $results = theme('box', t('Je zoek heeft geen resultaten opgeleverd.')); } } } return $results; } /** * returns array where to look for * @return array */ function _vm_search_get_subjects() { $subjects['opdracht'] = array('desc' => t('Opdracht'), 'types' => array('project') ); $subjects['persoon'] = array('desc' => t('Persoon'), 'types' => array('types_specialisatie', 'smaak_en_interesses') ); $subjects['groep'] = array('desc' => t('Groep'), 'types' => array('Villamedia_groep') ); $subjects['portfolio'] = array('desc' => t('Portfolio'), 'types' => array('artikel') ); return $subjects; }

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >