Search Results

Search found 3267 results on 131 pages for 'brian paul'.

Page 40/131 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Running git-svn with cron results in garbage in .git

    - by Paul
    I've setup a git-svn repo with cron to fetch from the svn repo daily. I have a script to do the fetching, and this is what is invoked by cron. Everything is fine with the repo, and the script works fine when executed manually. However, when it runs under cron, empty files get dropped into the .git directory. The files have names that look like they are some base64 output, e.g. juTrvjP6m8 and kcKf3hu3b4. Two of these files show up for every cron run. I thought these might be commit hashes, but they're not, git-show says it's an unknown revision. I set-up the repo as follows: git svn init http://svn.ip.addr/repo git svn fetch svn-remote My script looks like this: cd /gitsvn/dir git svn fetch svn-remote git svn push pub The last line pushes the repo to a separate (bare) public repo from which others can clone. I'm piping the output from the cron job to a file, which looks like this: fatal: unable to run 'git-svn' Counting objects: 21, done. Delta compression using up to 2 threads. Compressing objects: 100% (10/10), done. Writing objects: 100% (11/11), 59.08 KiB, done. Total 11 (delta 8), reused 0 (delta 0) To /gitpub/repo.git 360faf5..a153b0d trunk -> trunk The line "fatal: unable to run 'git-svn'" is alarming, but the fetch seems to go ahead anyway. Any suggestions? Where are these empty garbage files coming from, and how to stop them? Am I in for bigger problems in the future? BTW, I'm using git 1.6.3.3.

    Read the article

  • Cisco IOS policy route for router originated VPN traffic

    - by Paul
    We have a Cisco IOS router with two DSL connections. One of them is intended for general traffic (ADSL), the other for VPN links (BDSL) and various other traffic. So the default route is the ADSL link, and we have a combination of static routes for the VPN traffic, and policy routes for other traffic types that should go out the BDSL link. For site to site traffic, this is fine, we just static route the public IPs and remote networks out of the BDSL line. The policy based routing works fine for any internal traffic that matches an ACL. The problem is now that there are remote VPN sites originating from dynamic addresses, so we cannot use static routes. The replies to incoming ISAKMP requests are following the default route out of the ADSL (despite there being no crypto map on that interface). I want to route the outgoing VPN traffic out of the BDSL. I have tried adding udp/500 and esp to and from the route-map acl that pushes traffic out of the BDSL line, but it doesn't match, presumably because the route-map happen earlier than the IPSec stuff. Any ideas how I can do this? IOS ver: 12.4.13T.

    Read the article

  • Filezilla FTP Server - Security Implications of its usage on Windos Server 2003

    - by Brian Webster
    I'm running Filezilla server on my dedicated windows 2003 server. It uses its own user-access control system. The Filezilla server service itself is running under the System user. When I setup users within the FTP Server Administrator Interface, I do not need to setup equivalent users, or adjust permissions on folders to allow users to login. Example: I setup TestFTP user with password 'p' I set the home directoy of TestFTP user to be e:/website I verify that e:/website only has permission for the System and Admin accounts (right click - security in windows explorer) TestFTP is able to login to the server just fine. I'm OK with this (perhaps due to ignorance?). Is it generally frounded upon to utilize a FTP Server such as FileZilla Server that bypasses the built-in UAC in this method? If I wasn't clear enough, please let me know.

    Read the article

  • "Snapping" when in RDP

    - by Paul
    I am using mstsc.exe version 6.0 (Remote Desktop non-Metro version) from an XP machine and cannot get Windows 8 snapping to work. I can drag a metro app window to the left or right, but it doesn't stick, it just bounces back to full screen. The snap bars do not appear. The client PC has two monitors, each with a resolution of 1280x1024. While mstsc.exe 6.0 does have an option to use both monitors simultaneously in normal settings, I am launching it with spanning enabled: mstsc.exe /span So the effective resolution in the session is 2560x1024. Is there a trick to getting this to work over RDP?

    Read the article

  • SSH: How to change value in config file in one command

    - by Brian Graham
    How can I change the value of, let's say, PasswordAuthentication in /etc/ssh/sshd_config in commands? As well, remove a # in front of the "key" I wish to value. These don't all have to be in one command. I setup quite a few servers, and remembering where everything is gets exhausting, so I want to get a series of commands I can copy paste and it does the work for me for future reference. Sample values: PermitRootLogin no ChallengeResponseAuthentication no PasswordAuthentication no UsePAM no UseDNS no

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • Encryption of OS X to Windows SMB traffic and password

    - by Brian
    I connected to a Windows Server 2008 R2 shared folder from a Mac OS X Mountain Lion computer over the Internet using this command: mount -t smbfs //user@server/path/to/share local_folder Is traffic encrypted by default? What settings do I look at (if any) to know whether it was encrypted? If it wasn't encrypted, what's the easiest way to encrypt it? Was the password I typed at the command line encrypted? Update: sysadmin1138 has addressed the password question. Does anyone know how I can tell if the traffic itself is being encrypted?

    Read the article

  • Myvidoop error when trying to log in

    - by paul-werner.mp
    Recently I have not been able to get into my myvidoop username. It won't even bring up the pictures and asks to send the access code to one of my email addresses. I have seen this message before and there was no error previously but now it will not send the access code. I've tried accessing the site through firefox and through IE but I get the same thing (whether I went through the add on to get to the site or just typed in the website). I just want to know if I possibly have something that could be blocking it from sending this out. I use the free version of Avira for protection, run Ad Muncher (but I've also tried to get this access code with Ad Muncher closed), and have Ad Block Pro plugin (but like I've said before, the same thing happens in IE). I know it uses Java to send this access code out and I've even updated Java but still cannot get it to send it to me.

    Read the article

  • Process files in a folder that haven't previously been processed

    - by Paul
    I have a series of files in a directory that I need to carry an action out on using a script. Once the action is done, then I want to keep a log that the file has been processed, so that the next time the script is run, it does not attempt to carry out the action again. So lets say I can find all the files that should be processed like this: for i in `find /logfolder -name '20*.log'` ; do process_log $i echo $i >> processedlogsfile done So I have a file containing the logs I have processed, and my goal would be to modify the for loop such that these processed logs are not processed a second time. Doing a manual scan each time seems inefficient, particularly as the processedlogfiles gets bigger: if grep -iq "$i" processdlogfiles ; then continue; fi It would be good if these files could be excluded when setting up the for loop. Note that the OS in question is a linux derivative, a managment appliance, with a limited toolset (no attr command for example) and so no way to install additional utilities (well it is possible but not an option). Most common bash shell commands are available though. Also, the filenames and locations of the processed files must remain where they are - they can't be altered to reflect their processed status

    Read the article

  • How do you set the Scheduled Tasks "Run only if logged in" option from the command line?

    - by Paul K
    I want to create some tasks with the "Run only if logged in" option set, but using a batch file, as you can in the user interface version of the schtasks.exe tool. I'm doing this so I don't have to specify a password, either in the batch file, or when the batch file is run... I would use /ru System but I can't because the tool I'm automating (SyncToy 2.1) won't run with that account because I am hitting a network drive... Also, I noticed that Google Chrome sets up some tasks with this option set during installation, so I'm thinking there must be a way...

    Read the article

  • Linux and Windows Server Setup

    - by Brian
    Hello, I have an win 2008 R2 machine (a home machine of mine) that I am messing around with and learning the server technologies. I also wanted to try out oracle, and was wondering if its possible to setup a LINUX machine with Oracle, and have the two interoperate. What I mean by that is if I setup the server and my laptop on a domain, would it be possible to communicate to that LINUX machine and thus the Oracle database, and if so, are there any good resources on the setup? I was going to create a LINUX hyper v virtual... Any tips appreciated. Thanks.

    Read the article

  • IMAP mailboxes Backup script...

    - by Paul Stevens
    Hi guys, I need some advise to create a script that runs at night on my IMAP mail server, and backup all the mailboxes (50) and once the backup is done, burn such file in a DVD. What could be the best procedure to accomplish an IMAP backup and what tools should I use?.. Thanks

    Read the article

  • Changing memory allocator to Jemalloc Centos 6

    - by Brian Lovett
    After reading this blog post about the impact of memory allocators like jemalloc on highly threaded applications, I wanted to test things on a larger scale on some of our cluster of servers. We run sphinx, and apache using threads, and on 24 core machines. Installing jemalloc was simple enough. We are running Centos 6, so yum install jemalloc jemalloc-devel did the trick. My question is, how do we change everything on the system over to using jemalloc instead of the default malloc built into Centos. Research pointed me at this as a potential option: LD_PRELOAD=$LD_PRELOAD:/usr/lib64/libjemalloc.so.1 Would this be sufficient to get everything using jemalloc?

    Read the article

  • Random timeouts in IIS7

    - by Cor-Paul
    Hi, I have a weird problem which I think is caused by my IIS7 installation on Vista 64 bit. I have a bunch of AJAX calls and JS dynamic file loads (~30) in a local application, and I get random timeouts (or so it seems) in my browser. In Chrome it looks like the page just stops loading (no HDD activity), in Firefox/Firebug I can see that some of the files are being loaded but they never actually finish. When I reload the page the same occurs, but for (random) other files that must be loaded. When I try to load one of those JS files concurrently (so during the timeout in FF) in another browser, the file loads there. So I am pretty sure the request can be handled by IIS. I am thinking about a limit or so on simultaneous requests from the same browser which is not working correctly, but I am pretty clueless on how to solve this. Does anyone recognize this problem and know a solution? Thanks!

    Read the article

  • "A device attached to the system is not functioning" when reconnecting to XenApp 6 session

    - by Paul Doom
    A few of our XenApp 6 customers are seeing issue sometimes when users move from one workstation to another and try to connect to their running session. An error box pops up with "A device attached to the system is not functioning" This is on healthy 2008 R2 servers with all Citrix hotfixes applied. After the error, the user's session must be logged out before they can get back in. This was posted here: http://forums.citrix.com/thread.jspa?threadID=273457 , but is not answered. There is nothing telling in the event logs, and it is an inconsistent problem. Has anyone else seen this issue of found a fix?

    Read the article

  • Bought a 1U server, now can't find rails

    - by Paul Tomblin
    I bought a 1U server used on eBay (a Supermicro motherboard, but branded "Asempra"), and I also bought a set of "Supermicro" rails, but unfortunately the rails didn't fit the server. The side of the server looks like: Can you tell me where I can find rails for this machine?

    Read the article

  • removing the .local in local network name serving

    - by Paul Nathan
    I have several local machines; I use a OSX 10.6 machine to do most of the serving. Annoyingly, it postfixes its network name with .local. How would I set up a system so that I could access it by its hostname? server: httpd apache2 default install I am accessing it with a web browser(surprisingly). also when I ping my osx machine as name, it doesn't work; ping name.local does work.

    Read the article

  • sysctl.conf not running on boot

    - by Brian
    At what point is sysctl.conf supposed to be read during boot, and why might it not be running? I have the following settings which are not being applied when I reboot: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 fs.nfs.nlm_udpport = 32768 fs.nfs.nlm_tcpport = 32768 The first section is needed for KVM bridging, and the second is to run the NFS lock manager on a known port. However, after booting, these values have not taken effect. If I run sysctl -p, then they do. This wouldn't be a huge issue, except that I can't figure out how to restart the lock manager without rebooting. I would really like to know why sysctl.conf isn't working at boot, but I'd settle for just being able to restart the lock manager. This is on Ubuntu server 10.04.2, kernel 2.6.32-31-server. I know some daemons check the permissions on their config files and refuse to work if they're too permissive, but sysctl.conf is 644 root:root, which I'm pretty sure is the default.

    Read the article

  • Windows 7 File Associations .mov

    - by Paul Mung
    I created a new windows 7 SP1 base image. Everything is all fine and dandy with that. So i am now installing standard applications I would like Quicktime to manage .mov files. The only problem is WMP (Windows Media Player) won't give up the association to .mov files. It's driving me crazy... i've been reading threads on how to fix file associations. I would like to do it via registry, powershell or cmdline. I cannot use GPO I've tried the following: assoc .mov=QuickTime.mov ftype QuickTime.mov="%ProgramFiles(x86)\QuickTime\QuickTimePlayer.exe" Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\UserChoice" /v Progid /d QuickTime.mov /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithList" /v a /d QuickTimePlayer.exe /f Reg add "HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithList" /v b /d wmplayer.exe /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithList" /v MRUList /d ab /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithProgids" /v Quicktime.mov /t REG_NONE /d 0000 /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithProgids" /v WMP11.AssocFile.MOV /t REG_NONE /d 0000 /f

    Read the article

  • Why does my MacBook Pro trackpad sometimes set its tracking speed to slow, all by itself?

    - by Paul D. Waite
    Every now and then, the trackpad on my MacBook Pro will seem to set its own tracking speed to slow. I’ll notice that the cursor is moving slowly, and when I check in System Preferences, the tracking speed is indeed at slow, even though I never set it to slow myself. This might happen before/after switching into a VMWare virtual machine, but I’m not sure. It doesn’t seem to happen on startup or anything, just during use. Anyone else seen this?

    Read the article

  • How do I run a stable Windows XP kvm guest on Ubuntu 10.04?

    - by Jean-Paul Calderone
    I have three Windows XP guests running on a recently upgraded 64-bit Ubuntu 10.04 system. Occasionally (on the order of once every few days), one of the guests will become non-responsive and the kvm process on the host which is running that guest will start consuming 100% CPU. It will continue to do so until it is killed. When restarted, it will be fine for a while, and then the issue repeats. The kvm command line used to run all three guests is this: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 1024 -smp 1 -name bigdog21vmxp1 \ -uuid ea47ff84-125b-16f7-9a4d-a6d0d8bab46a \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/bigdog21vmxp1.monitor,server,nowait \ -monitor chardev:monitor \ -localtime \ -boot c \ -drive file=/var/lib/libvirt/images/windowsxp-1.qcow2,if=ide,index=0,boot=on,format=qcow2 \ -net nic,macaddr=54:52:00:02:06:0e,vlan=0,name=nic.0 \ -net tap,fd=58,vlan=0,name=tap.0 \ -chardev pty,id=serial0 \ -serial chardev:serial0 \ -parallel none \ -usb \ -usbdevice tablet \ -vnc 127.0.0.1:1 \ -k en-us \ -vga cirrus \ -soundhw es1370 Why do the systems misbehave this way sometimes? And what configuration can I change in order to fix it? Or, if the problem is due to a bug in kvm, what is the process for isolating a kvm failure so that the developers have a chance of fixing it?

    Read the article

  • iPhone Missing Apps in some Directories

    - by paul simmons
    Hi, I was moving iPhone applications directory, and ended in a result that some applications are missing from Springboard. As far as I can see, the apps in /Applications/GUID-LIKE-DIRECTORIES are missing like Facebook; however I see they are in /Applications if I check with SSH. Any help?

    Read the article

  • Recommendation for e-mail forwarding

    - by Paul Mrozowski
    We currently have a provider that we use to primarily forward our e-mails to both a hosted Exchange site and to outside e-mail addresses. We have a large # of forwards set-up (maybe 500). They work fine for us but the bandwidth costs are a getting pretty expensive (approx 80GB in email a month) so we're looking for a less expensive alternative (it costs us nearly $150/mo). I've looked at just hosting this here via a PostFix server and one of the nice front-ends available for it. However, I'm not thrilled with the prospect of being responsible for maintaining yet another server, backups, network connectivity, etc. So I'm leaning towards having this hosted by someone else if possible. Does anyone have any recommendations for hosting providers? Are there some I should stay away from?

    Read the article

  • Seeking web-based FTP client for very large file upload

    - by Paul M. Nguyen
    I have looked around for these for some time... the limits imposed by the web server and/or the dynamic programming environment (e.g. PHP) are far too restrictive for the application I'm working on. We need to be able to move large graphics and video files to and from clients (ranging from tens of MB to a few GB in a single file). Plain FTP with a proper desktop client will do the trick, and we're hosting this in Amazon EC2 with EBS. User management will be done from the office via webmin. Users are chroot-jailed into their home dir by proftpd. net2ftp will work for many clients, but we often need to move single files that approach 1GB or exceed 2-3GB which is way out of the range of any http-based uploader. So we turn to Java or Flash - can they do it? From within the web browser establish an FTP connection and grab a huge file? There are licensed applets and such out there, but none seem convincing. Again, I'm looking for some code that can speak FTP and read (& write?) the local disk, that is delivered in a web browser, and can move single files of 2GB+. The reason for having a web-based interface to FTP is to skip the software installation step for our clients. I will consider proper desktop client software as long as it's "portable" and at least Win+Mac and can be easily configured by lay-man users in a hurry.

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >