Search Results

Search found 2279 results on 92 pages for 'cable clutter'.

Page 40/92 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• convert home phone wiring to Ethernet

  - by aaa

  can i convert phone wiring in walls to act as only Ethernet network cause the phone wiring is not in use and not connected to the phone company so there is no voltage in the wires i remove the wall plate and i find 6 wires blue,blue/white,green,green/white,orange,orange/white , and i know that Ethernet use 8 here is what i am thinking get Ethernet cable cut it in half and attach wires from wall to the first computer and the same with the other computer so if this is possible do i just attach wires in the same color and ignore brown wire or do i have to rearrange wires , and how much the speed will be thank you in advance

  Read the article

• My Internet Connection Keeps Disconnecting at regular intervals

  - by dhasu

  I have a Cable modem connected to a router (Linksys WRT54G) I use internet on my Desktop PC using a Wireless Adapter (NETGEAR WG111) I am using Windows Vista. I tried few things like Contacting the ISP changing USB port for adapter updating router firmware tryin out the connection on a laptop Connecting directly using a LAN cord Nothing worked.. Anyone with more solutions ??

  Read the article

• Why does my monitor have a black screen but the power light is blinking green?

  - by Chris Vesper

  I have a ViewSonic VA912b 19" display I use as a secondary monitor. When I turn it on, the power light is green for a few seconds, and then switches to blinking green. The display stays black. Windows thinks the monitor is on, as it shows up in the control panel as a second monitor. If I unplug the DVI cable, it displays a "No Signal" message and the power light goes to amber, which means it went to sleep.

  Read the article

• Windows Server not installing audio drivers properly

  - by user34322

  I am trying to install a dummy sound card on a Windows Server machine (in Amazon EC2 cloud) in order for one of my application to work. I'm trying to accomplish that with Virtual Audio Cable and REAUDIO3. Both tools managed to install a new device on my Windows XP machine, but on Windows Server, no new devices appear. Windows Audio and Plug and Play services are Started and Automatic. ANY ideas are greatly appreciated.

  Read the article

• Copy photos from memory card (How do I manually start the wizard?)

  - by Motti

  I want to copy photos from my camera's memory card using Windows photo copy wizard, however I'm not connecting the camera directly (I lost the cable) rather I'm inserting the camera's SD memory card into the memory card's slot. Windows (Vista) recognizes the memory card and I can explore the photos but it doesn't automatically launch the "Device connected, what do you want to do" wizard. How do I manually launch the photo copy wizard?

  Read the article

• Tree structured troubleshooting survey which gives solution based on answers

  - by japie1001

  Is there some online tool which let me design a tree structured questionaire/survey which suggests a solution to a problem. Example troubleshooting survey for the problem of black monitor screen: Q1: Is the powercable connected to the monitor? 0 Yes 0 NO If answer is no: "The solution to your problem is to connect the power cable" If answer is yes: Contiue with Q2 Q2: Is the computer turned on: 0 yes 0 no etc Is there something like Google Forms where I can achieve this with online?

  Read the article

• Connect 2 ubuntu computers into a LAN

  - by arsan

  I've got two computers both running Ubuntu and i want to connect them into a LAN so i can ssh from the one into the another - i know how to do the ssh configuration part, i just don't know how to connect them - i put the cable but nothing happened. Please tell me what needs to be done.

  Read the article

• Samsung "Kies via Wifi" doesn't work, stuck on "Loading..."

  - by eyalb99

  When I connect my Galaxy S2 to my laptop using "Kies via Wifi" it doesn't work. On my phone it tells me it is connected, and on the laptop I can see the device "GT-I9100" under connected devices, but I see no files or anything else. When I move the mouse icon over the "GT-I9100", it writes "Loading...". I've waited long enough but nothing happens. When I connect the phone using USB cable, it works perfectly fine.

  Read the article

• Dell Inspiron 1525 - internal hard drive not detected

  - by GingerT

  Others have asked about this issue but had intermittent access to their HD, therefore their results did not apply to this situation. I have tried reseating the HD to no effect. I also tried booting from the Internal HD to no effect. Next step get a connector cable and move the data to a different HD, or send in for HD recovery? Any suggestions?

  Read the article

• MB with CPU and power supply - can be turned on but not off [closed]

  - by COcodrilo

  Hi, Not sure whether this question belongs here, I hope so. I have just bought a motherboard and CPU. I have installed the CPU, cooler and connected to CPUFAN on the MB. I have plugged the power supply to MB and the cable from "ON" button to pins named "PWR" and the LEDs. However when I turn on the PC, both HDD and POWER leds are continously on and the PC cannot be turned out. What could I be missing?

  Read the article

• How to transfer my iphone connection to my laptop via USB?

  - by user23392

  I have an iPhone with 3g connection and i want to transfer it to my PC laptop via USB cable, and not Wifi. Is there any solution or tool for that? Note: I'm running Windows Vista. Thanks

  Read the article

• Sharing an internet connection via crossover capable without changing IP settings

  - by jhioj

  I have a home wireless network and two laptops. My primary laptop is normal, and runs Windows 7. My secondary laptop has no wireless capability, and I have no access to the IP settings on my account. How can I access the internet on my secondary computer through my primary computer using a crossover cable or something similar? In other words, how can I make my primary computer produce a connection that my secondary computer will find indistinguishable from normal ethernet?

  Read the article

• Troubleshooting Guides for End-Users

  - by user49995

  I am an IT Administrator. I would like to create and distribute simple troubleshooting guides for my end-users. Does anyone know if these can be purchased anywhere? Has anyone tried a similar project and have any advice? For instance a sample entry would read: Can't connect to the internet 1) Check physical connection to internet (cable attached to your computer) 2) check wireless connection 3) ping dns server 4) if Ping fails call Tech Support

  Read the article

• Possible DVI Spliter Issues?

  - by Kurru

  Hi I am thinking about buying a DVI splitter cable online and a DVI- HDMI adapter. Can i use these to clone my monitors output so one can go to my monitor, and the other to my projector? Can anyone think of any issues with using the adapter like this? Would there be problems with signal lose or anything? Thanks

  Read the article

• Old HDD is not getting detected when connected through USB

  - by Mayur

  My laptop HDD got corrupted and I replaced that with a new HDD. Now I wanna retrieve the data in the old HDD. I tried using external HDD casing and connected it my laptop cable thru USB. But it is not getting detected. Is there any way to retrieve the data from my old HDD. Please help. Thanks

  Read the article

• Recovering data from failed Raid configuration with 4 drives and two raid sets (Asus P6T / Intel ICH10r)

  - by user56365

  I've added the complete detailed version for my question below for those who can help, but want to quickly summarize my question first. I setup two Raid arrays using (4) WD Raptors, a striped set for the OS and 1+0 set for crucial data. After booting once out of the 50 times a cable fell out, the drive wasn't recognized in the array anymore. After trying to fix it, another drive did the same. I now have two drives remaining, luckily with the parity information. I know the striped set is gone, but I need the data on the other set. Can anyone recommend anything to recover the data, or fix the two drives that doesn't allow the raid controller to recognize the drives, even though they are listed on the utility screen as still apart of the configuration but that they are not found? More Details I recently upgraded to a ASUS P6T motherboard with an Intel ICH10R raid controller and changed my previous 4 drive raid array from strictly a Raid 1+0 set to a Raid 0 for the OS/Page/Scratch drive and a Raid 1+0 set for crucial data. I never had problems after upgrading with my configuration, even when a drive died and was replaced. I managed to rebuild the array fine. Unfortunately this time around, a cable came unattached and I booted my system up until the raid status screen with the degraded error. This shouldn't have been a problem, but after I attached the drive it was no longer recognized as a member in the array. Both drives actually show up as a non-member disk. I've spent a very, very long time online trying to find information or support and haven't had much luck. After spending time trying to scan the drive for errors, damaged partition info, etc.. another drive in the set decided it didn't want to be recognized as a part of the array. At this point, I have two out of the four drives still functioning, but the Raid 1+0 array went from degraded to failed and I must find a way to retrieve that data. I think the two drives still in the array have the parity information because they show up as OS (110GB),BACKUP(80GB) and OS:1(110GB),BACKUP(80GB) under windows data management. The other two are simply 74gb Raw unallocated Is it possible recover the data using those two drive only, and which tool would I use? Could it be a simple partition table or any other error that is repairable with hard drive utilities out there? I know the Raid 0 set is done for, but I would assume because the correct drives failed in a 1+0 config to save the data I can retrieve it some how.

  Read the article

• 4 month old 500 GB SATA HDD making noise?

  - by metal gear solid

  My 4 month old 500 GB SATA HDD making noise sometimes and the PC hangs when it makes noise when the noise stops desktop work fine. It doesn't happen every day but it does happen. Is something wrong with HDD, Data, power cable, or my cabinet's power supply? Should I run scandisk or defragmentation on the disk.

  Read the article

• Different resolution laptop display

  - by mumich

  Hi guys, some of you might have read my previous question "Weird laptop display", I've got another question regarding the same issue. I should've mentioned I went for higher resolution display. Instead of XGA display (1024x768 px) I went for SXGA+ (1400x1050 px). So the question is: Is there a difference between connecting XGA and SXGA+ display to laptop motherboard (different ribbon cable, invereter, etc.) ? Thanks a lot

  Read the article

• Network switching issues with MacOS 10.7?

  - by Denis

  I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

  Read the article

• Is it possible to copy recordings off of a DVR box hard drive?

  - by bdr9

  My cable TV company gives me a Cisco Explorer 8640HDC DVR box that can record shows from TV. I know that it contains a hard drive to save the shows on. What format and file system are used to store the videos on the hard drive? I have looked at the documentation for this DVR box and there is no technical information about the manner in which recordings are stored. Is it possible to connect the hard drive to a computer and extract the recordings from it?

  Read the article

• FC SAN network high-error rate simulation

  - by Wieslaw Herr

  Is there a way to simulate a malfunctioning device or a faulty cable in a FC SAN network? edit: I know shutting down a port on a switch is an option, I'd like to simulate high error rates though. In an ethernet network it would be a simple case of adding a transparent bridge that discards a given percent of the packets, but I have absolutely no idea how to tackle that in an Fibre Channel environment...

  Read the article

• Symbol LL500 Scanner Interface Not Detected

  - by agentfll

  I have an old Symbol LL500 scanner interface box and a scanner to go with it. The box's original cable used one of the old microsoft mouse connectors, but I got a converter to USB. The problem is that when I connect it to my MacBook, the interface powers up and works, but the computer dosen't recognize it or even say that a device is connected. Is there any way to make it see that the interface is there or am I just screwed?

  Read the article

• Networking Mac OS X 10.6 and Vista via ethernet?

  - by Moshe

  How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

  Read the article

• What brand of wireless router would be compatible with many broadband modems and easy to use?

  - by Junior Mayhé

  Good afternoon I'm having too many intermittent problems with my DLINK DIR 400 router: Wireless connection is lost with no reason. Perhaps the current router is incompatible with this Scientific Atlanta cable modem DPC 2100R2. Scientific Atlanta is a Cisco company, but I'm really worried about this combination DLink - Cisco. Could anyone recommend me a good wireless router for Windows Vista / Windows 7? Thank you

  Read the article

• Runs perfect but I can't reinstall my OS.

  - by Kravlin

  hey, I have a computer that seems to have faulty hardware. I can run operating systems off of the computer and it runs perfectly, however, whenever i boot from CD to try and install a different operating system the thing tells me that the system never responds. Linux hangs after 30 seconds, windows just freaks out. I think it's a problem with how it's connecting to the hard drive. Is it possible it's just the IDE cable or do you think it's something else?

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >