Search Results

Search found 3039 results on 122 pages for 'centos'.

Page 40/122 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Load-balanced Linux server across internet?

  - by LinuxGnut

  I'm investigating setting up a load balanced server solution consisting of three CentOS 5.4 boxes. Two of these boxes will reside in one facility, while a third will reside in a different facility. I'm currently working to set up heartbeat, ldirectord, ipvsadm to load-balance the machines, but I'm not sure its going to work with I'm not overly familiar with the details behind how all of these work, but is the load balancing going to work correctly when these servers are not all on the same LAN? I'm not sure if heartbeat is using SNMP to send signals or not, which would only work over a LAN. Has anyone tried this or found a different solution?

  Read the article

• limit the speed of writing files to NFS

  - by xgwang

  CentOS 5.6 NFS is mounted on the server for backup disk space. When the backup job started, it could reach 80MB/s and we really do not expect it took so much bandwidth. So i need to find a way to limit the speed of writing to NFS. I tried rsync with --bwlimit=5000. However, it did limit the reading speed, but the accumulated data still was written at 80MB/s, and no writing activities for seconds. Is there any way to limit the writing speed of NFS?

  Read the article

• Apache says DocumentRoot doesn't exist when it does

  - by Jakobud

  I used Webmin to create the following Virtual Host: <VirtualHost *:80> DocumentRoot "/var/www/whatever" ServerName whatever.ourdomain <Directory "/var/www/whatever"> allow from all Options +Indexes </Directory> </VirtualHost> And when restarting Apache I get Starting httpd: Warning: DocumentRoot [/var/www/whatever] does not exist The thing is, the directory absolutely DOES exist. I'm staring right at it. pwd shows me that's my current directory, etc. It's not that hard to spell it right. I can't find any other errors or warnings in the httpd logs. apache:apache owns the directory and all subdirectories/files. There isn't any symlinks or anything involved here. What am I missing or what else should I look at to determine why this is? OS is CentOS 6.0

  Read the article

• cPanel IPTables custom rules

  - by James Haigh

  Hi, I'm trying to allow a host access to port 3306 by IP. I've added the rule and ran an iptables-save and also service iptables save. These commands show as "OK" with no reported errors. And this works absolutely fine. Now, the server hasn't been restarted at all since I've been having this problem, but every day when I start developing on the server that needs mySQL access, it reports that the connection is refused. Back on the mySQL server, all I need to do is service iptables restart and everything then works as normal. The mySQL server is a CentOS cPanel VPS running on OpenVZ. Anyone know how I can make these rules persist? Is it something cPanel is doing overnight that is messing with my config? Thanks.

  Read the article

• How to write to Samba folder?

  - by Darren

  I created a Samba share on my CentOS machine and I can connect to the share and read the contents but I cannot write files to it or delete them. In Samba I have set readable to yes and writeable to yes, as well as made the folder I want to access apart of the wheel group of which I added the user that is accessing it from Samba. The folder in quesiton is /var/www/. I have set that folder and all folders under it to the wheel group which can read and write to it. What am I doing wrong here?

  Read the article

• Red Hat Kickstart: How do I Prevent partitioning?

  - by frio

  Hey all, I'm currently working on a new virtualisation setup using Xen, and Centos for my workplace. We intend to deploy the domUs into LVM volumes. Currently, the only thing preventing this from working as smoothly as we'd like is the Kickstart script's insistence on partitioning. This is the relevant part from our current KS template (which I've been messing with): # Partitioning clearpart --all --initlabel --drives=xvda part / --size=0 --grow --ondisk=xvda --fstype=ext3 This sets up a single partition and installs to it - which would be fine, but I'd prefer if there were no partitions, and installed directly to the existing LVM (so that we could then mount the LVM from the dom0 for backup and maintenance purposes). It's possible I'm doing something wrong, and should be exporting the volume as xvda1 rather than xvda - which I'm more than happy to amend - but I'm still not sure how I'd navigate the Kickstart! I'd really appreciate any help :). Cheers in advance!

  Read the article

• Restart an in-use NFS server without interruption (within timeout)

  - by zebediah49

  I have a bunch of compute clients working on jobs, saving output data to a NAS machine. All machines are centos 6.2. They mount it via automount NFS, with a timeout of 1200 (default config). The NAS machine needs to be restarted. If I can restart the machine within that 1200s (20 minute) window, will the clients just block on IO until it comes back up? A minor interruption (pause) in service is ok, as long as it doesn't cause the running processes to error out. If necessary I could loop through and SIGSTOP all job processes, restart and resume them -- I just don't want to break the open file handles. How can I run a restart like this without killing processes with open files?

  Read the article

• SFTP not working, but SSH is

  - by Dan

  I've had a server running CentOS for a few months now. A few days ago, I stopped being able to connect to it over SFTP. I've tried from multiple computers, OSes, clients, and internet connections. I can SSH in just fine, though. For example, Nautilus gives me this: Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Please select another viewer and try again. I was under the impression that SFTP was just pure SSH, and if one worked, the other would, and vice-versa. Clearly that's not the case, though. What could I have done wrong?

  Read the article

• How to write to Samba folder?

  - by Darren

  Hi all, I created a Samba share on my CentOS machine and I can connect to the share and read the contents but I cannot write files to it or delete them. In Samba I have set readable to yes and writeable to yes, as well as made the folder I want to access apart of the wheel group of which I added the user that is accessing it from Samba. The folder in quesiton is /var/www/. I have set that folder and all folders under it to the wheel group which can read and write to it. What am I doing wrong here?

  Read the article

• Migrating a running production server to Xen, unmodified as a second HDD?

  - by DaveCol

  I have a production server which I am looking to virtualize via XEN. For this purpose I have purchased a new Sata HDD, in which I have promptly installed CentOS 5.5 x64 with XEN server installed. Now I have two HDD: /dev/sda1 running as host with Xen Server Installed; and /dev/sda2 which is the HDD where the original server has installed. Is it posible to use /dev/sda2 to work as GuestOS in a xen server? Would I have to modify its kernel? Thank you for any input

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Malware on my server

  - by Brandon Shutter

  Upon going to a couple of our websites this morning that we host for clients and have designed ourselves, I was prompted by Chrome that there is malware. About two weeks ago I ran rkhunter and ckhunter on the server, but it only came up with false postives. Server is running CentOS. The following error: http://i.imgur.com/58DNl.jpg How would I go about finding the cause of this? Update. This same thing popped up on another server of ours this time running Ubuntu 8.04.

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• What's faster, cp -R or unpacking tar.gz files?

  - by Buttle Butkus

  I have some tar.gz files that total many gigabytes on a CentOS system. Most of the tar.gz files are actually pretty small, but the ones with images are large. One is 7.7G, another is about 4G, and a couple around 1G. I have unpacked the files once already and now I want a second copy of all those files. I assumed that copying the unpacked files would be faster than re-unpacking them. But I started running cp -R about 10 minutes ago and so far less than 500M is copied. I feel certain that the unpacking process was faster. Am I right? And if so, why? It doesn't seem to make sense that unpacking would be faster than simply duplicating existing structures.

  Read the article

• Barnyard Service - MySQL Error

  - by SLYN

  I installed barnyard2 and saved as a service. When I run service barnyard2 start, Barnyard2 is failed. After I run tail -100 /var/log/messages and I encounter a fault like this. ERROR database: 'mysql' support is not compiled into this build of snort#012 Aug 22 11:52:06 barnyard2[25771]: FATAL ERROR: If this build of barnyard2 was obtained as a binary distribution (e.g., rpm,#012or Windows), then check for alternate builds that contains the necessary#012'mysql' support.#012#012If this build of barnyard2 was compiled by you, then re-run the#012the ./configure script using the '--with-mysql' switch.#012For non-standard installations of a database, the '--with-mysql=DIR'#012syntax may need to be used to specify the base directory of the DB install.#012#012See the database documentation for cursory details (doc/README.database).#012and the URL to the most recent database plugin documentation. Aug 22 11:52:06 barnyard2[25771]: Barnyard2 exiting What sould I do for solving this problem? When I installed Barnyard2, I used these commands: # ./configure --with-mysql --with-mysql-libraries=/usr/lib64/mysql # make ; make install (My System is CentOS 6.5 x86_64.)

  Read the article

• Why does yum index get corrupted?

  - by TomOnTime

  Occasionally yum's cache gets corrupted and we see errors like this: error: db3 error(-30974) from dbenv->failchk: DB_RUNRECOVERY: Fatal error, run database recovery error: cannot open Packages index using db3 - (-30974) error: cannot open Packages database in /var/lib/rpm The workaround is rm -f /var/lib/rpm/__db* and then the next "yum" command regenerates the data. My question is: what is likely to be causing this? Is there some common task that ignores locks or has other problem that causes this? We have hundreds of CentOS machines and there is no pattern to which see this problem. It could be a "one in a million" issue, which at large scale is seen often. NOTE: I realize this is a very "open ended" question, but if an answer finds the cause, I will go back and turn the question into something more canonical that directly relates to the specific issue.

  Read the article

• Cannot SSH into Virtual Machine

  - by MasterGberry

  I am running a CentOS VM on my desktop that I use for development testing when coding in python. At my school I have a dedicated IP setup for the VM and my desktop so I never seem to have an issue ssh'ing from desktop into VM. I am now at home for winter break and cannot seem to SSH into the VM using the local ip address behind my router, the external IP with port 22 forwarded to my VM, or anything. Strangely enough I can ssh into my production server and then fromt here ssh into the VM, but not from my desktop to the VM directly What should I do to get this to work? Thanks

  Read the article

• Turning a running Linux system into a KVM instance on another machine

  - by Charles

  I have two physical machines that I wish to virtualize. I can not (physically) plug the hard drives from either machine into the new machine that will act as their VM host, so I think that copying the entire structure of the system over using dd is out of the question. How can I best go about migrating these machines from their hardware to the KVM environment? I've set up empty, unformatted LVM logical volumes to host their filesystems, with the understanding that giving the VMs a real partition to work with achieves higher performance than sticking an image on the filesystem. Would I be better off creating new OS installs and rsyncing the differences over? FWIW, the two machines to be VM'd are running CentOS 5, and the host machine is running Ubuntu Server 10.04 for no particularly important reason. I doubt this matters too much, as it's still going to be KVM and libvert that matter.

  Read the article

• How does hadoop decide what its nodes hostnames are?

  - by Dan R

  Currently the urls generated by the jobtracker & namenode return either hostnames like bubbles.local or just bubbles. These end up not resolving unless the client machine has specified these in their /etc/hosts file. When I run the hostname command on these machines it returns a hostname complete with the domain (E.G bubbles.example.com) Running a small java test on these machines InetAddress addr = InetAddress.getLocalHost(); byte[] ipAddr = addr.getAddress(); String hostname = addr.getHostName(); System.out.println(hostname); Produces output just like the hostname command. Where else could hadoop be grabbing a hostname to use in its jobtracker / namenode UI? This is occurring in clusters with Hadoop 1.0.3 and 1.0.4-SNAPSHOT from early august. The machines are running CentOS release 5.8 (Final). The generated URLs I'm referring to are like this http://example:50075/browseDirectory.jsp?namenodeInfoPort=50070&dir=/ or http://example.local:50075/browseDirectory.jsp?namenodeInfoPort=50070&dir=/

  Read the article

• Downgrading httpd on centos4 with yum

  - by Echo

  A server currently has httpd-2.0.63-2.el4s1.centos.2 installed (from the centosplus repo) but that version is missing some security updates. Where as httpd-2.0.52-49.ent.centos4 is a lower version, but it does have recent security updates. So I need to downgrade. It looks like the only way would be to remove it and then install 2.0.52. Would this mess up any configurations? Should I backup all the conf files first?

  Read the article

• Specific apache + mysql settings for a light-weight site

  - by Good Person

  I have a small website with a Joomla and a Moodle set up. It seems that both of these are very slow. The server (CentOS release 5.5 (Final)) is a virtual dedicated server with about 2GB of ram. I don't expect to ever get more than 10-15 people on at the same time (and if that is high) What settings could I change in either apache, mysql, or even the OS to increase the performance of my site? I'm not concerned about running out of resources if I get too many visitors. If you need more specific data leave a comment and I'll edit the question.

  Read the article

• Making a .so file for Apache.

  - by Josh

  I am using CentOS 5. I am trying using Mod_Security which requires liblua. I was not able to find lua on the default repos. I prefer not to use any third party repos. This in mind, I downloaded the lua source from the offical site. After compiling the only file even close is liblua.a. I need a liblua-5.1(.4).so file for Apache. How do I make a .so file for liblua?

  Read the article

• Netbeans automatically changes the file owner when updating files

  - by Alon_A

  We use Netbeans IDE 7.2 to edit our PHP files. In the Run Configuration it is configured as Remote Web Site to automatically save the changes on our web server (Centos OS 6.3). The problem is that every time it is updating the files the owner of the file is changed from apache:apache to userThatUploadedTheFile:users. This causes us problems with SOAP cache files that are configured with apache:apache ownership, and we need to manually chownit back to apache:apache. We've checked the "Preserve Remote File Permissions" checkbox, so the permissions are not changed, only the owner. Is there any solution to preserve the ownership ?

  Read the article

• about Linux read/write only permissions

  - by Bimal

  My question looks similar to another thread: Linux directory permissions read write but not delete Here, I want to create a directory where I can give the permissions like: A user can create/upload any files. A user can re-upload and overwrite the files. A user cannot remove the file anymore. I am on CentOS 5.5, basic user only. How can I do that? Or is there any third party software that can be installed to do this? Or, create a new process which will lock the permissions right after a new file is uploaded via ssh?

  Read the article

• Is it safe to use up all memory on linux server, not leaving anything for the cache?

  - by Temnovit

  I have a CentOS server fully dedicated to MySQL 5.5 (with innodb tables mostly). Server has 32 GB RAM, SSD disks, and avarage memory usage looks like this: So about 25GB is in use and about 6.5GB is cached. I am experiencing performance problems with WRITE queries, so I was thinking, is this the optimal cache size? I might increase innodb buffer size, so that linux cache would become smaller, or decrease it, so it would be bigger. What is the optimal used/cached memory balance for busy MySQL server on linux?

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >