Search Results

Search found 5262 results on 211 pages for 'commands'.

Page 40/211 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• RSH between servers not working

  - by churnd

  I have two servers: one CentOS 5.8 & one Solaris 10. Both are joined to my workplace AD domain via PBIS-Open. A user will log into the linux server & run an application which issues commands over RSH to the solaris server. Some commands are also run on the linux server, so both are needed. Due to the application these servers are being used for (proprietary GE software), the software on the linux server needs to be able to issue rsh commands to the solaris server on behalf of the user (the user just runs a script & the rest is automatic). However, rsh is not working for the domain users. It does work for a local user, so I believe I have the necessary trust settings between the two servers correct. However, I can rlogin as a domain user from the linux server to the solaris server. SSH works too (how I wish I could use it). Some relevant info: via rlogin: [user@linux~]$ rlogin solaris connect to address 192.168.1.2 port 543: Connection refused Trying krb4 rlogin... connect to address 192.168.1.2 port 543: Connection refused trying normal rlogin (/usr/bin/rlogin) Sun Microsystems Inc. SunOS 5.10 Generic January 2005 solaris% via rsh: [user@linux ~]$ rsh solaris ls connect to address 192.168.1.2 port 544: Connection refused Trying krb4 rsh... connect to address 192.168.1.2 port 544: Connection refused trying normal rsh (/usr/bin/rsh) permission denied. [user@linux ~]$ relevant snippet from /etc/pam.conf on solaris: # # rlogin service (explicit because of pam_rhost_auth) # rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_lsass.so set_default_repository rlogin auth requisite pam_lsass.so smartcard_prompt try_first_pass rlogin auth requisite pam_authtok_get.so.1 try_first_pass rlogin auth sufficient pam_lsass.so try_first_pass rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth required pam_unix_auth.so.1 # # Kerberized rlogin service # krlogin auth required pam_unix_cred.so.1 krlogin auth required pam_krb5.so.1 # # rsh service (explicit because of pam_rhost_auth, # and pam_unix_auth for meaningful pam_setcred) # rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 # # Kerberized rsh service # krsh auth required pam_unix_cred.so.1 krsh auth required pam_krb5.so.1 # I have not really seen anything useful in either system log that seem to be directly related to the failed login attempt. I've tail -f'd /var/adm/messages on solaris & /var/log/messages on linux during the failed attempts & nothing shows up. Maybe I need to be doing something else?

  Read the article

• Hosted Exchange 2010 Send As

  - by Ravi

  I have a hosted exchange 2010 and I am trying to setup the Send-As permission. I am following http://technet.microsoft.com/en-us/library/bb676368.aspx which basically describes the commands for achieving this. I have user account aaa and bbb [PS] C:\Windows\system32get-mailbox -organization myorg -identity "aaa" Name Alias ServerName ProhibitSendQuota ---- ----- ---------- ----------------- aaa aaa mx1 4.95 GB (5,315,022,848 bytes) [PS] C:\Windows\system32get-mailbox -organization myorg-identity "bbb" Name Alias ServerName ProhibitSendQuota ---- ----- ---------- ----------------- bbb bbb mx1 4.95 GB (5,315,022,848 bytes) Now, when I use the command below to give bbb permission to send-as aaa, I get the following error: [PS] C:\Windows\system32get-mailbox -organization myorg -identity "aaa" | Add-ADPermission -Extended Rights "Send As" -user "bbb" mx1/Microsoft Exchange Hosted Organizations/myorg/aaa wasn't found. Please make sure you've typed it correctly. + CategoryInfo : InvalidArgument: (:) [Add-ADPermission], ManagementObjectNotFoundException + FullyQualifiedErrorId : D2FD338,Microsoft.Exchange.Management.RecipientTasks.AddADPermission The error message that 'aaa' was not found does not make sense because i just retrieved the mailbox in the previous commands. I have tried using email addresses instead of alias but it does not work.

  Read the article

• Is there a way to create a consistent snapshot/SnapMirror across multiple volumes?

  - by Tomer Gabel

  We use a NetApp FAS 6-series filer with an application that spans multiple volumes. For backup purposes I would like to create a consistent snapshot that spans these volumes at the same point in time (or at least with an extremely low delta); additionally, we'd like to to use SnapMirror to replace the production environment to test volumes. The problem is in creating a consistent snapshot/SnapMirror, since these commands are not transactional and do not take multiple parameters. I tried scripting consecutive "snap create" or "snapmirror resync" commands via SSH, but there's always a 0.5-2 second difference between each snapshot. It's currently "good enough", but I'm seriously concerned about the consistency impact with increased load (we're currently in pre-production). Has anyone managed to create a consistent snapshot that spans several volumes? How did you pull it off?

  Read the article

• %HOMEPATH% Posh-Git error in Powershell, in ConEmu on Windows 7 64-bit

  - by atwright

  I am always getting the following error in Posh-Git in Powershell, in ConEmu on Windows 7 64-bit: Resolve-Path : Cannot find path 'C:\wamp\www\MobileApps\Backbone\%HOMEPATH%' because it does not exist. At D:\Users\Andy\Documents\WindowsPowerShell\Modules\posh-git\GitUtils.ps1:265 char:13 + $home = Resolve-Path (Invoke-NullCoalescing $Env:HOME ~) + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\wamp\www\Mob...bone\%HOMEPATH%:String) [Resolve-Path], ItemNotFoundException + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.ResolvePathComma nd Join-Path : Cannot bind argument to parameter 'Path' because it is null. At D:\Users\Andy\Documents\WindowsPowerShell\Modules\posh-git\GitUtils.ps1:266 char:29 + Resolve-Path (Join-Path $home ".ssh\$File") -ErrorAction SilentlyContinue 2> ... + ~~~~~ + CategoryInfo : InvalidData: (:) [Join-Path], ParameterBindingValidationExc eption + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.Po werShell.Commands.JoinPathCommand Can anybody advise what might be wrong?

  Read the article

• which command is used to block tcp port

  - by astha

  i want to block tcp port with the help of iptables commands linux which command is used for this purpose????

  Read the article

• Sftp via shell - how it is possible

  - by Tomasz Zielinski

  (Moved from StackOverflow: http://stackoverflow.com/questions/4589725/sftp-via-shell-how-it-is-possible) How is it possible for tools like http://mysecureshell.sourceforge.net/ to provide SFTP access by merely specifying them as shell by typing: usermod -s /bin/MySecureShell myuser ? I'm on Debian Lenny, with default sshd/OpenSSH. Is this e.g. a feature of SSH protocol that allows user shell to handle sftp commands? I can't wrap my head around this because usually OpenSSH needs sftp-server module (or the internal one in newer versions) - and this makes me think that sftp commands don't even hit the shell and are handled earlier or by different code path..

  Read the article

• Enabling NAT loopback on HG556a router?

  - by galdikas

  This is one of the standard issue vodafone routers. So i set up web-server on my laptop, and it is accessible to the internet now. However I need to be able to access it from my machine using the public address. But I just cannot find where to enable nat loopback. I looked for options in both regular and advanced user logins (web interfaces). So I suppose the last option is telneting into it, and using commands to do it.. but I don't know how to access it (cant find the credentials). http://rhiggins.sdf-eu.org/blog/index.php?entry=entry110722-164625 In above link it says that i can find this info in configuration file, but anyone could tell me how to access it? And then what commands should I use to enable the NAT loopback?

  Read the article

• Segmentation Fault with mod_include

  - by Benedikt Eger

  Hi, I'm using a rather complex structure with multiple ssi-includes, set- and echo-commands. The first document writes a lot of set-commands, includes another document which then again includes a third document. On the last included document the variable values are printed using the echo-command. I noticed that with an increasing number of variables the probability for a segmentation fault to happen rises. Did anyone experience something similar? How do I go about debugging such a problem? I'm using IBM_HTTP_Server/2.0.47.1-PK65782 Apache/2.0.47

  Read the article

• Linux file permissions not being preserved

  - by yellavon

  I am deploying some custom software as root (a necessity for this situation). I set the owner/group to user1:user1 and set all the files to 644 beforehand in shell, then copy and deploy with ant. However, when files get copied over from the deployment directory, the ownership changes back to root and all the files install with 666 permissions. This seems to occur whether the file is overwritten or newly created. I believe there is a way to set an option in cp, mv commands to preserve permissions, but that would be a lot of commands to change. How can I fix this? Is there some setting I can change temporarily for root so the install always preserves the file permissions?

  Read the article

• Sftp via shell - how is it possible?

  - by Tomasz Zielinski

  (Moved from StackOverflow: http://stackoverflow.com/questions/4589725/sftp-via-shell-how-it-is-possible) How is it possible for tools like http://mysecureshell.sourceforge.net/ to provide SFTP access by merely specifying them as shell by typing: usermod -s /bin/MySecureShell myuser ? I'm on Debian Lenny, with default sshd/OpenSSH. Is this e.g. a feature of SSH protocol that allows user shell to handle sftp commands? I can't wrap my head around this because usually OpenSSH needs sftp-server module (or the internal one in newer versions) - and this makes me think that sftp commands don't even hit the shell and are handled earlier or by different code path..

  Read the article

• How to configure sudoers with path wildcards?

  - by C. Lee

  I need sudo for a command for any path under a particular area. Example: sudo mycommand /opt/apps/myapp/... What is the sudoers syntax to allow this command to run in any path that falls under /opt/apps/myapp? This is Solaris 10 sudo. Thank you for your reply, but I don't need wildcards for the path to the commands, but wildcards for the arguments for the commands. For example, we want to do something like... sudo mycmd /opt/userarea/area1 sudo mycmd /opt/userarea/area1/area2 sudo mycmd /opt/userarea/area1/area2/area3 So far, using wildcards for the arguments in sudoers look like this: /opt/userarea/* /opt/userarea/*/* And it seems like if we want to have N levels of directories, then we need N lines in sudoers! Is there a better way to include all N levels in one line in sudoers? Thanks.

  Read the article

• how to limit upload bandwidth per user in linux?

  - by Gihan Lasita

  Can anyone provide the tc command to limit upload bandwidth per user in Debian Lenny? I found that to mark packets per user with iptables I can use the following command iptables -t mangle -A OUTPUT -p tcp -m owner --uid-owner testuser -j MARK --set-mark 500 but I have no idea how to use tc update by running following commands, i managed to limit testuser upload bandwidth to 10Mbit iptables -t mangle -N HTB_OUT iptables -t mangle -I POSTROUTING -j HTB_OUT iptables -t mangle -A HTB_OUT -j MARK --set-mark 30 iptables -t mangle -A HTB_OUT -m owner --uid-owner testuser -j MARK --set-mark 10 tc qdisc replace dev eth0 root handle 1: htb default 30 tc class replace dev eth0 parent 1: classid 1:1 htb rate 10Mbit burst 5k tc class replace dev eth0 parent 1:1 classid 1:10 htb rate 10Mbit ceil 10Mbit tc qdisc replace dev eth0 parent 1:10 handle 10: sfq perturb 10 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 10 fw flowid 1:10 now the problem is, i do not want to limit testuser's FTP bandwidth but by running above commands FTP speed also limited to 10Mbit. Regards

  Read the article

• Hidden characters inserted after pipe (|) followed by a space

  - by nifty

  Very often, on my Mac, when I use the pipe (|) character followed by a space character, an invincible character will be inserted in between. This is especially annoying when using the terminal, as it makes commands invalid. If I type the following in iterm2, I often get the following: ls | cat zsh: command not found:  cat If I hit the up-arrow-key to get my previous command, and then remove and reinsert the space between | and cat, the command will work. When I copy paste the working and non working commands into a file, like this: non-working: ls | cat working: ls | cat and open it in Hex Fiend it shows the following: non-working: ls |¬†cat working: ls | cat I've also experienced the same kind of issue in SublimeText2 using the square brackets ([]) followed by a space. So I don't believe its an issue with iTerm2.

  Read the article

• understanding mount -o bind

  - by Ionut

  Few questions after the following commands: mount -o bind /new_disk/home/user/ /home/user/ mount -o bind --no-mtab /new_disk/home/user/ /home/user/ What is the difference between the two commands other than " Mount without writing in /etc/mtab. This is necessary for example when /etc is on a read-only filesystem." What is the difference between mount -o bind and mount --bind ...if there are Let's suppose i don't know there is a partition mounted using -o bind --no-mtab...where can I find if there is any mound point with bind ? The only way i can detect this is grep user /proc/mounts but in that line there is no info abut bind. Thank you.

  Read the article

• How do I reset the $PATH variable on Mac OS X?

  - by Neil

  I've messed up my path variable, and now some apps that I run raise errors saying Command Not Found (error 127) for commands like 'date' and 'sleep'. These commands work fine when executed directly in the shell. I'm guessing this has something to do with a malformed $PATH variable, and need to know how to reset it. I've deleted the files ~/.bashrc , ~/.bash_profile, /etc/bash.bashrc, and ~/.bashrc and ~/.profile. What other files could hold my $PATH? Is there some simpler way to reset the Path than dig into the myriad files which could hold my path? Note, this path problem is only with my user. I made a test user on my system, and the path was fine, back to normal.

  Read the article

• List/remove files, with filenames containing string that's "more than a month ago"?

  - by Martin Tóth

  I store some data in files which follow this naming convention: /interesting/data/filename-YYYY-MM-DD-HH-MM How do I look for the ones with date in file name < now - 1 month and delete them? Files may have changed since they were created, so searching according to last modification date is not good. What I'm doing now, is filter-ing them in python: prefix = '/interesting/data/filename-' import commands names = commands.getoutput('ls {0}*'.format(prefix)).splitlines() from datetime import datetime, timedelta all_files = map(lambda name: { 'name': name, 'date': datetime.strptime(name, '{0}%Y-%m-%d-%H-%M'.format(prefix)) }, names) month = datetime.now() - timedelta(days = 30) to_delete = filter(lambda item: item['date'] < month, all_files) import os map(os.remove, to_delete) Is there a (oneliner) bash solution for this?

  Read the article

• Tomcat startup.sh doesn't work

  - by OMG Ponies

  I've just installed Tomcat 6.0.20 (per Jira documentation recommendation) on RedHat EL 5 Server, and attempts to use: bin] # ./startup.sh ...result in: Using CATALINA_BASE: /opt/software/jira-tomcat-6.0.20 Using CATALINA_HOME: /opt/software/jira-tomcat-6.0.20 Using CATALINA_TMPDIR: /opt/software/jira-tomcat-6.0.20/temp Using JRE_HOME: /etc/alternatives/jre Usage: catalina.sh ( commands ... ) commands: debug Start Catalina in a debugger ... version What version of tomcat are you running? I've edited the catalina.sh file to add: echo $0 echo $1 ...and I see: catalina.sh start ...etc when I use: ./catalina.sh start Why does catalina.sh not use the parameter?

  Read the article

• Script to set "Hide file extensions"

  - by Ickster

  I'm tired of the multi-step process to set my preferred folder options on every server to which I log on (Mostly Win2008, but also some 2012 and Win7 here and there). I'd love to be able to script the process, but unfortunately, I can't find any commands or extensions to do so for folder options. There are several settings I'd like to change, but in particular, I'd like to set "Hide file extensions for known file types" to false. I figure that if I can do that, I'll be able to manage any additional settings on my own. Methods that work on the vanilla command line would be preferred, but if there are commands in PowerShell, I'll use that.

  Read the article

• telnet - is there a maximum line limit?

  - by benc

  I am working on several servers that use HTTP for transport of commands. What I have encountered is that some of the commands I am trying to issue by hand are very long GETs, several lines, and that when I telnet from my Mac to my Solaris system, I cannot seem to cut and paste the line successfully. I get a couple bounching sounds (which I assume is a control-g - bell) and then it never pastes everything. From trying to break it up into smaller pieces, I am getting the impression that TELNET, or my bundled telnet client or server has a maximum line length that I had never bumped into. I did some googling and superusering, but did not find anything definitive.

  Read the article

• Best practices to avoid Jenkins error: sudo: no tty present and no askpass program specified

  - by s g

  When running any sudo command from Jenkins I get the following error: sudo: no tty present and no askpass program specified I understand that I can solve this by adding a NOPASSWD entry to my /etc/sudoers file which will allow user jenkins to run commands without needing a password. I can add an entry like this: %jenkins ALL=(ALL)NOPASSWD:/home/vts_share/test/sudotest.sh ...but this leads to the following issue: how to avoid specifying full path in sudoers file? I can add an entry like this: %jenkins ALL=NOPASSWD: ALL ...but this allows user jenkins to avoid the password prompt for all commands, which seems a bit unsafe. I'm just curious what my options are here, and if there are any best practices I should consider.

  Read the article

• How to get Bash shell history range

  - by Aniti

  How can I get/filter history entries in a specific range? I have a large history file and frequently use history | grep somecommand Now, my memory is pretty bad and I also want to see what else I did around the time I entered the command. For now I do this: get match, say 4992 somecommand, then I do history | grep 49[0-9][0-9] this is usually good enough, but I would much rather do it more precisely, that is see commands from 4972 to 5012, that is 20 commands before and 20 after. I am wondering if there is an easier way? I suspect, a custom script is in order, but perhaps someone else has done something similar before.

  Read the article

• grep, xargs, sed to clean up PHP eval hack

  - by roktechie

  I'm attempting to use the commands found on http://devilsworkshop.org/tutorial/remove-evalbase64decode-malicious-code-grep-sed-commands-files-linux-server/55587/ to clean up a PHP eval based hack on a site. Sample code to match/remove <?php eval(base64_decode("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")); Attempted command: sudo grep -lr --include=*.php "eval(base64_decode" /home/user/webdir | sudo xargs sed -i.bak 's/<?php eval(base64_decode[^;]*;/<?php\n/g' The sudo has been added as it is required to have permission to read/write on the dir I'm accessing. The files list properly from grep, but are not changed by sed. Any suggestions?

  Read the article

• creating cookbooks and roles with out chef-server

  - by Josh Nankin

  I want to run: knife role create blah I use chef-solo and don't need knife to connect to a server. I just would like to run these commands for helping me prepopulate the files quickly. Everytime I run of these commands it attempts to connect to a server. This does not happen for knife cookbook create blah Double-ewe tee eff. Update: I've noticed this is the case for databags and environments as well. I've read elsewhere that knife is primarily intended for use with the chef-server API, but it seems ridiculous that something like this can't be done. It just needs to save the darn file.

  Read the article

• How to quickly save what is currently shown in cmd.exe to a file

  - by Zeiga

  I am asking if there is a quick way/command to save the current standard output from cmd.exe or powershell to a file. For example, I have run a bunch of commands in cmd.exe which generating like hundreds of lines of standard output. Ideally, I am looking for a single command to do "select all" and save to a file automatically. Note: I've read this. But I don't want to change my original commands, so "" or "" redirection cannot be used in this scenario. Thanks.

  Read the article

• Search for specific call in asterisk log files

  - by chiborg

  In my Asterisk log file, I have a line like this (truncated): Executing [123@mycontext:1] Set("SIP/myhost-b7111840", "__INCOMINGCLI=4711") Now I want to do the following filtering while looking at the log file with tail -f: Match lines with a specific value for "INCOMINGCLI", storing the call ID (the "SIP/myhost-b7111840" part) Output all subsequent lines that contain the call ID. As a bonus, having a grep-like option like -A would be nice. I could do that easily in various programming languages, but how would I do it with standard UNIX commands like sed or awk? Can it be done with these commands?

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >