Search Results

Search found 13930 results on 558 pages for 'dev center'.

Page 40/558 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Google TV Gets Bad Reception. Can Media Center Pull in the Signal?

    - by andrewbrust
    The news hit Monday morning that Google has decided to delay the release of its Google TV platform, and has asked its OEMs to delay any products that embed the software.  Coming just about two weeks prior to the 2011 Consumer Electronics Show (CES), Google’s timing is about the worst imaginable.  CES is where the platform should have had its coming out party, especially given all the anticipation that has built up since its initial announcement came 7 months ago. At last year’s CES, it seemed every consumer electronics company had fashioned its own software stack for Internet-based video programming and applications/widgets on its TVs, optical disc players and set top boxes.  In one case, I even saw two platforms on a single TV set (one provided by Yahoo and the other one native to the TV set). The whole point of Google TV was to solve this problem and offer a standard, embeddable platform.  But that won’t be happening, at least not for a while.  Google seems unable to get it together, and more proprietary approaches, like Apple TV, don’t seem to be setting the world of TV-Internet convergence on fire, either. It seems to me, that when it comes to building a “TV operating system,” Windows Media Center is still the best of a bad bunch.  But it won’t stay so for much longer without some changes.  Will Redmond pick up the ball that Google has fumbled?  I’m skeptical, but hopeful.  Regardless, here are some steps that could help Microsoft make the most of Google’s faux pas: Introduce a new Media Center version that uses XBox 360, rather than Windows 7 (or 8), as the platform.  TV platforms should be appliance-like, not PC-like.  Combine that notion with the runaway sales numbers for Xbox 360 Kinect, and the mass appeal it has delivered for Xbox, and the switch form Windows makes even more sense. As I have pointed out before, Microsoft’s Xbox implementation of its Mediaroom platform (announced and demoed at last year’s CES) gets Redmond 80% of the way toward this goal.  Nothing stops Microsoft from going the other 20%, other than its own apathy, which I hope has dissipated. Reverse the decision to remove Drive Extender technology from Windows Home Server (WHS), and create deep integration between WHS and Media Center.  I have suggested this previously as well, but the recent announcement that Drive Extender would be dropped from WHS 2.0 creates the need for me to a) join the chorus of people urging Microsoft to reconsider and b) reiterate the importance of Media Center-WHS integration in the context of a Google compete scenario. Enable Windows Phone 7 (WP7) as a Media Center client.  This would tighten the integration loop already established between WP7, Xbox and Zune.  But it would also counter Echostar/DISH Network/Sling Media, strike a blow against Google/Android (and even Apple/iOS) and could be the final strike against TiVO. Bring the WP7 user interface to Media Center and Kinect-enable it.  This would further the integration discussed above and would be appropriate recognition of WP7’s Metro UI having been built on the heritage of the original Media Center itself.  And being able to run your DVR even if you can’t find the remote (or can’t see its buttons in the dark) could be a nifty gimmick. Microsoft can do this but its consumer-oriented organization, responsible for Xbox, Zune and WP7, has to take the reins here, or none of this will likely work.  There’s a significant chance that won’t happen, but I won’t let that stop me from hoping that it does and insisting that it must.  Honestly, this fight is Microsoft’s to lose.

    Read the article

  • Forwarding all mail to a single dev box on IIS via virtual SMTP

    - by Greg R
    I am trying to set up a development environment for our web server. I would like all emails that are relayed by the server go to a specific mailbox, regardless of who they were sent to. For example, some application on the server sends an email to [email protected]. I want that email to go to [email protected]. Is that possible to do with IIS/Virtual SMTP? Is there some other way of doing this? I don't have exchange server running, if that makes a difference. Any help would be greatly appreciated. Thanks a lot!

    Read the article

  • OpenCV install problems on Studio 12.04 - broken dependencies

    - by Will
    I'm trying to follow the Ubuntu OpenCV documentation at OpenCV. The provided script has a line which executed for some time, taking away more packages than I expected (such as ubuntu-studio video); sudo apt-get -qq remove ffmpeg x264 libx264-dev When the script gets to the line below, it bombs; sudo apt-get -qq install libopencv-dev build-essential checkinstall cmake pkg-config yasm libtiff4-dev libjpeg-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev python-dev python-numpy libtbb-dev libqt4-dev libgtk2.0-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils ffmpeg The error msg is; E: Unable to correct problems, you have held broken packages. I've since run Update-Manager, run sudo apt-get updates, rebooted, tried the above script line manually, and still no change. I've just run sudo apt-get install -f and nothing seemed to change. It did mention that some packages were no longer needed and could be removed by apt-get autoremove, so I ran that. It removed a number of packages, so I reran the install command above. Still same problem of held broken packages. I just ran sudo apt-get -u dist-upgrade Part of the response was; The following packages have been kept back: gstreamer0.10-ffmpeg I'm not sure what that means. I do know that it shows up in my Update-Manager and cannot be checked I then ran sudo dpkg --configure -a and then reran sudo apt-get -f install and the package was still not upgraded, though there was this very interesting comment; Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-ffmpeg : Depends: libavcodec53 (< 5:0) but it is not going to be installed or libavcodec-extra-53 (< 5:0) but 5:0.7.2-1ubuntu1+codecs1~oneiric2 is to be installed E: Unable to correct problems, you have held broken packages. Then I ran sudo apt-get -u dist-upgrade It showed I had one held package, so I ran; sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade It also exited without upgrading the package, so I ran; sudo apt-get remove --dry-run gstreamer0.10-ffmpeg:i386 And it gave me; *The following packages will be REMOVED: arista gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. Remv arista [0.9.7-3ubuntu1] Remv gstreamer0.10-ffmpeg [0.10.12-1ubuntu1]* But when I reran sudo apt-get -u dist-upgrade It showed the package was still there. *The following packages have been kept back: gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.* Update: Just went into Synaptic PM and completely removed gstreamer0.10-ffmpeg Reran sudo apt-get -u dist-upgrade And was told; 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. However, when I ran the original apt-get to install opencv (first code at the top of this question), it still gave me the same broken package errors. So I tried $ cat /etc/apt/sources.list # # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ precise universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main # deb http://download.opensuse.org/repositories/home:/popinet/xUbuntu_11.04 ./ # disabled on upgrade to precise and then; $ cat /etc/apt/sources.list.d/* But I don't have enough reputation to post the results here (it says I need at least 10 reputation points to post more than 2 links), so I don't know how to provide the requested feedback. Then tried; $ sudo apt-get check [sudo] password for <abcd>: Reading package lists... Done Building dependency tree Reading state information... Done However, no resolution of the problem yet. What else do I need to do? Will an upgrade to Ubuntu Studio 13.xx solve this problem (or compound it)?

    Read the article

  • Sql 2008 r2 DEV install failed

    - by obulay
    I am trying to install Sql 2008 r2 DEVeloper on Windows 2008 STD. It previously had Sql 2008 Enterprise installed. I first uninstalled SQL 2008. I think uninstall still leaves some crap in registery, and in Program files. Installation fails in the last step of the process - installation, about couple of minutes into it. Can't insert picture for you because serverfault does not allow me to do so. But it basically it: Error message: "Installation failed" I re-installed SQL 2008 Enterprise on this box and we are not going to go to R2 on older servers that previously had SQL 2005 or SQL 2008 on it. Looking at Windows log: Activation context generation failed for "C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x64\Microsoft.SqlServer.Configuration.SqlServer_ConfigExtension.dll". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4027" could not be found. Please use sxstrace.exe for detailed diagnosis.

    Read the article

  • Unable to update/ install any files [closed]

    - by Surya
    Possible Duplicate: “Problem with MergeList” error when trying to do an update Just now I installed ubuntu 12.04 on my Lenovo G570 laptop. First I got an error at the time of installation (don't know about it) and I restarted the system and next time, it went well. So, after installing problems started.. There was a error with "Language recognition" and I tried to fix it but didn't work. I tried to install powerTop to check the status of power management. at terminal: sudo apt-get install powertop This is the error I got surya@surya-Lenovo-G570:~$ sudo apt-get powertop install [sudo] password for surya: E: Invalid operation powertop surya@surya-Lenovo-G570:~$ sudo apt-get install powertop Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened. surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ I downloaded Google Chrome .deb one and tried to install but its not working. Software center is opened and its not loading. There was a notification on the status bar which says: An error occurred please run the package manager from the right-click menu ... .... ... E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages "Copy & Paste" from terminal is not really working... When I press Ctrl + C; its showing ^C on terminal but its not working.. The most important error: I am unable to see a "chip" icon on the status bar so as to install proprietary drivers for my ATI drivers... The interesting part is, powertop worked will on live cd and it even detected my ATI card. Update When I opened "Software Up to Date", this showed a error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' : My laptop details Lenovo G570; Intel 2nd Gen i5 processor 4GB DDR3 RAM Intel in-build graphics + AMD Radeon HD 6370M 1GB graphics. I need help ASAP.

    Read the article

  • Should a c# dev switch to VB.net when the team language base is mixed?

    - by jjr2527
    I recently joined a new development team where the language preferences are mixed on the .net platform. Dev 1: Knows VB.net, does not know c# Dev 2: Knows VB.net, does not know c# Dev 3: Knows c# and VB.net, prefers c# Dev 4: Knows c# and VB6(VB.net should be pretty easy to pick up), prefers c# It seems to me that the thought leaders in the .net space are c# devs almost universally. I also thought that some 3rd party tools didn't support VB.net but when I started looking into it I didn't find any good examples. I would prefer to get the whole team on c# but if there isn't any good reason to force the issue aside from preference then I don't think that is the right choice. Are there any reasons I should lead folks away from VB.net?

    Read the article

  • Grub2 -- Dualboot Ubuntu LTS 12.04 and Windows 7 -- Detects two Windows 7 (loader) entries

    - by DarkIron112
    this is the first question I have ever asked the Ubuntu Community. :D I'm fairly new to Ubuntu, but I understand the basics and know how to navigate the Terminal. I also know how to ask for/research my problems before asking for/ help. I have scoured the internet high and low and learned much of how Grub2 works. But nothing has helped me to solve my problem. My problem is this: I have a computer that has three hard drives. It previously had Windows XP, but I upgraded to Windows 7. I also installed Ubuntu 12.04 LTS (Precise Pangolin). During my installation of Windows 7, there was a failure and I had to restart the installation. Afterwards, I installed Ubuntu. After some trouble removing all traces of the XP OS (Ubuntu auto-detected it, but not Windows 7) I got the two OSes working flawlessly. Or, almost. When booting up, Grub2 used to display Ubuntu, Ubuntu Recovery Mode, Other Versions of Linux, memtest, followed by "Windows 7 (loader) on /dev/sda1" and "Windows 7 (loader) on /dev/sdb1". I eventually removed Recovery Mode, Other Versions, and Memtest. Now, when I run: sudo update-grub I get this print-out: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sdb1 I would like to remove "Windows 7 (loader) on /dev/sda1", as it is a broken entry that shouldn't exist, and must have been installed during my first Windows 7 attempt. I cannot find a Windows 7 entry in /etc/grub.d... And I don't know where to look. Here is a layout of my hard drives: /dev/sda1/ (1.82 TiB), NTFS ("Media") /dev/sdb1/ (100 Mib), NTFS ("System Reserved") /dev/sdb2/ (149 GiB), NTFS ("Windows 7") /dev/sdb3/ (149 GiB), Extended (" ") /dev/sdb4/ (145 GiB), ext4 (" ") /dev/sdb5/ (4 GiB), linux-swap (" ") /dev/sdc1/ (488.28 GiB), NTFS ("Downloads") /dev/sdc2/ (488.28 GiB), NTFS ("AltMedia") /dev/sdc3/ (886.45 GiB), NTFS ("Personal") unallocated (2.09 MiB), unallocated What I think has happened: Windows 7 installed first and badly. I installed it again. First, there was Windows XP to guide where the bootloader went to so it was put on /dev/sdb1/. But, the second time no such guide existed so the machine put another bootloader on /dev/sda1/. sda1, by the way, is the only partition on a 2TB drive. No boot record partition appears to exist according to gedit. I'm not sure where Grub2 is getting this information from. But, there it is. Is there anything somebody can do to help me? Or, is there any more information I should add? Thank you, community!

    Read the article

  • How to repair an external harddrive?

    - by dodohjk
    I would like to reformat my hard disk, and if possible recover the (somewhat unimportant) contents if possible. I have a Western Digital 1TB hard drive which had a NTFS partition. I unplugged the drive without safely removing it first. At first a pop up was asking me to use a Windows OS to run the chkdsk /f command, however, in the effort to keep using a Linux OS I used the ntfsfix command on the ubuntu terminal Now, when I try to access the hard drive, it doesn't show up anymore in Nautilus. I tried reformatting it using Disk Utility, but it gives me an error message, and Gparted would hang on the "Scanning devices" step infinitely. Please comment any output that you would like to see and I will add it to my question. EDIT disk utility tells me is on /dev/sdb the command sudo fdisk -l gives dodohjk@DodosPC:~$ sudo fdisk -l [sudo] password for dodohjk: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006fa8c Device Boot Start End Blocks Id System /dev/sda1 * 4094 482344959 241170433 5 Extended /dev/sda2 482344960 488396799 3025920 82 Linux swap / Solaris /dev/sda5 4096 31461127 15728516 83 Linux /dev/sda6 31463424 52434943 10485760 83 Linux /dev/sda7 52436992 62923320 5243164+ 83 Linux /dev/sda8 62924800 482344959 209710080 83 Linux Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part /dev/sdb2 ? 1917848077 2462285169 272218546+ 73 Unknown /dev/sdb3 ? 1818575915 2362751050 272087568 2b Unknown /dev/sdb4 ? 2844524554 2844579527 27487 61 SpeedStor Partition table entries are not in disk order I wrote something wrong here, however here the output of fsck /dev/sbd is dodohjk@DodosPC:~$ sudo fsck /dev/sdb fsck from util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device&gt;

    Read the article

  • How to fix the "Setting locale failed" error while installing vim?

    - by user211775
    When installing vim through Software Center , I get this error installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: install-info Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1

    Read the article

  • VMWare Virtual Center unrecoverable error: (mks)

    - by JGAnhao
    Hi there, I have a ESX3i, build 207095 and i'm having a problem connecting to my VM's using the vmware remote console. On my PC always gives me an error about vmare-remotemks. I can do all of the tasks using VI client, but when a try to open remote console it breaks, the only thing that apears on the black screen is "unknown MKS Event". I can't find a solution to my problem, and i really need to be able to start a remote console from my PC. On my laptop the error doesn't occurs, both machines are Windows 7 x64. Thanks, JGanhão

    Read the article

  • Conditional dev|nfs mount in Linux

    - by o_O Tync
    I have a mount point — let it be /media/question — and two possible devices: a physical HDD and a remote NFS folder. Sometimes I plug the device in physically, in other cases I mount it via NFS. Is there a way to specify both of them in fstab so that executing mount /media/question will preferably choose physical volume, and when it's not available — NFS?

    Read the article

  • CentOS 6.5 as WebServer for Django Dev

    - by Charlesliam
    During CentOS 6.5 Installation I choose WebServer type for this computer. The server has a static IP address 192.168.111.100. The CentOS was updated I managed to install virtualenv with Python 2.7. Within the virtualenv, I'll be using Django Framework. After I tried to run the command using root user python manage.py runserver 0.0.0.0:8000 I can't see the website from other computer within the LAN when I try to type 192.168.111.100:8000/admin on my browser. I already disable firewall using service iptables stop I can ping the 192.168.111.100 and I have a good feedback with nslookup. What seems the problem of my config?

    Read the article

  • How do I resolve certificate errors on HP blade center

    - by Martin Hilton
    I'm trying to sort out the ssl certificate errors that we get when trying to manage our HP c7000 blade enclosures. To that end I have created a signing certificate and imported it into the browser. In Onboard Administrator I created a certificate signing request, which I signed with my CA and then uploaded the certificate. This worked perfectly, and I no longer get any SSL errors when connection to Onboard Administrator. The problem comes when trying to connect through Onboard Administrator to the iLo on the blades themselves. Done by clicking on the "Web Administration" link. Onboard Administrator links to the blade with it's IP address rather than host name. But the certificate signing request that iLo creates uses the host name. Even when this certificate is signed the browser still complains it is for the wrong domain. I either need to be able to get Onboard Administrator to connect to the blades using host name rather than IP address, or get a certificate signing request which contains the IP address as the CN rather than the host name. It doesn't particularly matter which. Does anybody know how to configure this?

    Read the article

  • Scoping a home dev server

    - by AbhikRK
    Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance

    Read the article

  • Scoping a home dev server

    - by AbhikRK
    Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance Have posted this question previously on SuperUser but no responses yet. So was wondering if this is a more apt forum for this.

    Read the article

  • IIS- defining a website as a dev site

    - by Lock
    I am new to IIS. Is there a way during the setup of IIS to have a variable of some sort set that I can use to tell my site that this is the development copy? I am using PHP via IIS 7.5 and would like to have a file with a few lines that define which databases etc is used by my application. Is this the purpose of web.config? I would love there to be a place in the setup of the website where I can set a few variables that are accessibly by my application. That way, when I migrate files to live, I don't need to worry about access details to databases etc.

    Read the article

  • need advice on data center move, communication with both facilities during transition

    - by Brian Roden
    We are beginning the process of moving to a new facility. Office and warehouse operations will both be moving, and we must get shipping operations up and running at the new location while continuing to ship from the old location. Our contract with some third-party warehouse tenants requires two business day turnaround (only weekends and holidays excluded), so we can't have major downtime during the move. We would like to keep our 172.16.60/61.xxx internal address space in use throughout the move. Is it possible to keep using this same internal range, and have our existing WatchGuard Firebox 520 and whatever router we get for the other location (preferably the same model) just treat both locations as one network, leaving our host IPs the same throughout the move? Renumbering the servers when they move isn't a big deal, but our wireless terminals for order picking in the warehouse have fixed IPs (and a fixed IP, non-DNS reference to the host they speak with) and would be a massive undertaking to reconfigure when the servers move (each device would have to be reconfigured at least 2 times -- some when we start using them in the new building and the host is still here, all of them in both locations when the host moves to the new building, and the rest when they finally make the move to the new building). We're trying to avoid that if possible.

    Read the article

  • What to do with database in dev/production phases of a website?

    - by TheLQ
    For a while now I've been keeping a website I'm developing in the standard dev/production phases. Its been pretty simple: Mercurial repo for dev, repo for production. Do work in dev, get approved, push to production. But now I'm trying to apply this process to a new website that has a database and am struggling on how to figure out a development strategy. What I didn't mention above is that I do all my work on my own repo, push it to dev, then later push it to production, so its 3 different servers. So how do I manage my database? The obvious solution of mysqldump every commit isn't going to happen, and a dump at the end of the day isn't all that helpful when you want to undo later one change that happened in the middle of the day. What is the best way to accomplish this?

    Read the article

  • SharePoint Search Center issue

    - by George2
    Hello everyone, I am using SharePoint Server 2007 with collaboration portal template on Windows Server 2008. The default search address for a site is pointed to /SearchCenter/Pages/Results.aspx. Any ideas how to change the address to some other address? thanks in advance, George

    Read the article

  • Looking for Remote Control that works with everything (even Windows 7 Media Center)

    - by T Reddy
    Using my Google-Fu, it seems that the most basic of things one gets with any DVR is the remote control. Had I known it would be difficult just to get a consumer IR receiver for Windows 7 I may not have bothered to build an HTPC. But too late, I already have the HTPC ready to go (minus the CETON card...) So I'm moving away from TiVo, I hate paying the monthly fees and my box is ancient. I'm looking for these solutions to my HTCP setup...I want to: Switch audio from HDMI to SPDIF via the remote control (i.e., switch from TV to Receiver) (as a side note, the built-in audio on the mobo has software to do this). Pressing the volume button on the remote will always change the TV's volume (or the Receiver's if possible) and NOT the PC's volume. The remote/receiver works well around 25 feet. Bonus if the IR Receiver can work with my existing TiVo remote (or other remotes laying around the house) I read a review of the Bluetooth TiVo remote...it sounds promising...but I'm not sure if it is great for Windows 7 HTPC?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >