Search Results

Search found 5806 results on 233 pages for 'graphics'.

Page 40/233 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Fix for poor hd playback for 11.04 upwards

    - by mark kirby
    Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

    Read the article

  • Looping 3D environment in shmups

    - by kamziro
    So I was watching Ikaruga: http://www.youtube.com/watch?v=Aj23K8Ri68E And then raystorm: http://www.youtube.com/watch?v=TQ4V0G5ykAg After looking at their 3D backgrounds for a little bit, it appears that they use a lot of repeated segments. How would one start with the development with such systems? Would there be editors that can be used (or at least help) with creating the environments? Perhaps a 3D map with splines describing the path of the ship, as well as events on the splines?

    Read the article

  • Texture artifacts on iPad

    - by MrDatabase
    I'm porting an iPhone game to the iPad. When I move textures "quickly" (5.0 pixels every update at a rate of 60 Hz) I start to see little "artifacts" or remnants of where the texture used to be. I'm not sure if I know the correct terminology for this... imagine a texture at some location on the screen... then next to it is the same texture but faded a bit... then the same texture again just faded a bit more. I'm using CADisplayLink to drive my update loop if that helps. Also I didn't see this issue on the 3G or the iPhone 4. Any ideas? Cheers!

    Read the article

  • Anti aliasing problem

    - by byronyasgur
    I am auditioning fonts on google web fonts and one that I was discounting was Ubuntu because it looked a bit jagged ( screenshot below taken straight from google); however afterward I read an article where it was mentioned as a good choice, and there was a screenshot where it looked really good ( to me anyway ). I am using windows 7 and have tried looking at it in chrome and firefox. I notice the same thing with some other fonts but this one is a good example because it looks perfect in the screenshot but not so good when I look at it on their site. I know this essentially is a question about setting my computer, but I thought that this would be the best place to pose the question: Is there something wrong with the settings on my machine seeing as it's obviously not showing the font the same on my computer as it did when the article writer downloaded it and used it in an image. The screenshot from Google ... The screenshot from the article above ...

    Read the article

  • How to emulate Mode 13h in a modern 3D renderer?

    - by David Gouveia
    I was indulging in nostalgia and remembered the first game I created, which used Mode 13h. This mode was really simple to work with, since it was essentially just an array of bytes with an element for each pixel on the screen (using an indexed color scheme). So I thought it might be fun to create something nowadays under these restrictions, but on modern hardware. The API could be as simple as: public class Mode13h { public byte[] VideoMemory = new byte[320 * 200]; public Color[] Palette = new Color[256]; } Now I'm wondering what would be the best way to get this data on the screen, using something like XNA / DirectX / OpenGL. The only solution I could think of was to create a texture with the same size as the VideoMemory array, write the contents of VideoMemory to it every frame, then render that texture in a full screen quad with the correct aspect ratio and using point texture filtering for that retro look. Is there a better way?

    Read the article

  • Sorting objects before rendering

    - by dreta
    I'm trying to implement a scene graph and in all the articles i've come across there is talk about object sorting. So you'd sort your objects by "material" for example. Now untill i sat down and started implementing it, i kind of took this for granted, because it made sense. But now i'm wondering what does sorting actually change? In my engine, i have a manager for UBOs, i use those to store data that'll be shared between programs, at the moment that only involves time, camera and projection matrices and lights (i'm not worrying about managing which lights affect which objects ATM). Now for each model i have to change the model to world matrix uniform, no sorting is going to change that. So is the jump from changing this matrix to also setting a material for each object that bad? I vaguely remember reading somewhere that each time you change something in the pipeline, it has to get flushed and that can cause performance issues. But for each drawing call i'm setting up a model to world matrix anyway, so what sense does it make to ever be concerned about this? BTW is there any information about whether changing a uniform and calling glBufferSubData is more (or less) expensive.

    Read the article

  • how to label a cuboid using open gl?

    - by usha
    hi this is how my 3dcuboid looks ,i have attached complete code , i want to label this cuboid using different name across sides how is it possible using opengl in android...plz help me out public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

    Read the article

  • Getting the number of fragments which passed the depth test

    - by Etan
    In "modern" environments, the "NV Occlusion Query" extension provides a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? Use mipmaps and simply read the pixel on the 1x1 level. Again the question of accuracy and if it is even possible using non-power-of-two textures. The problem wit these approaches is, that the pipeline gets stalled which results in major performance issues. Therefore, I'm looking for a more performant way to accomplish my goal. Using the EXT_OCCLUSION_QUERY_BOOLEAN extension Apple introduced EXT_OCCLUSION_QUERY_BOOLEAN in iOS 5.0 for iPad 2. "4.1.6 Occlusion Queries Occlusion queries use query objects to track the number of fragments or samples that pass the depth test. An occlusion query can be started and finished by calling BeginQueryEXT and EndQueryEXT, respectively, with a target of ANY_SAMPLES_PASSED_EXT or ANY_SAMPLES_PASSED_CONSERVATIVE_EXT. When an occlusion query is started with the target ANY_SAMPLES_PASSED_EXT, the samples-boolean state maintained by the GL is set to FALSE. While that occlusion query is active, the samples-boolean state is set to TRUE if any fragment or sample passes the depth test. When the occlusion query finishes, the samples-boolean state of FALSE or TRUE is written to the corresponding query object as the query result value, and the query result for that object is marked as available. If the target of the query is ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, an implementation may choose to use a less precise version of the test which can additionally set the samples-boolean state to TRUE in some other implementation dependent cases." The first sentence hints on a behavior which is exactly what I'm looking for: getting the number of pixels which passed the depth test in an asynchronous manner without much performance loss. However, the rest of the document describes only how to get boolean results. Is it possible to exploit this extension to get the pixel count? Does the hardware support it so that there may be hidden API to get access to the pixel count? Other extensions which could be exploitable would be debugging features like the number of times the fragment shader was invoked (PSInvocations in DirectX - not sure if something simila is available in OpenGL ES). However, this would also result in a pipeline stall.

    Read the article

  • How can I design good continuous (seamless) tiles?

    - by Mikalichov
    I have trouble designing tiles so that when assembled, they don't look like tiles, but look like a homogeneous thing. For example, see the image below: Even though the main part of the grass is only one tile, you don't "see" the grid; you know where it is if you look a bit carefully, but it is not obvious. Whereas when I design tiles, you can only see "oh, jeez, 64 times the same tile," like in this image: (I took this from another GDSE question, sorry; not be critical of the game, but it proves my point. And actually has better tile design that what I manage, anyway.) I think the main problem is that I design them so they are independent, there is no junction between two tiles if put closed to each other. I think having the tiles more "continuous" would have a smoother effect, but can't manage to do it, it seems overly complex to me. I think it is probably simpler than I think once you know how to do it, but couldn't find a tutorial on that specific point. Is there a known method to design continuous / homogeneous tiles? (My terminology might be totally wrong, don't hesitate to correct me.)

    Read the article

  • Pokemon Yellow wrap transitions

    - by Alex Koukoulas
    So I've been trying to make a pretty accurate clone of the good old Pokemon Yellow for quite some time now and one puzzling but nonetheless subtle mechanic has puzzled me. As you can see in the uploaded image there is a certain colour manipulation done in two stages after entering a wrap to another game location (such as stairs or entering a building). One easy (and sloppy) way of achieving this and the one I have been using so far is to make three copies of each image rendered on the screen all of them with their colours adjusted accordingly to match each stage of the transition. Of course after a while this becomes tremendously time consuming. So my question is does anyone know any better way of achieving this colour manipulation effect using java? Thanks in advance, Alex

    Read the article

  • How do I install lubuntu? (kernel panic)

    - by melvincv
    Please help me install Lubuntu 12.04 i386 on an old computer. I select the "Try Lubuntu without installing" and it crashes with a kernel panic. Rarely I do get to the live OS, but soon the display goes blank. The messages log gives me '[drm] ERROR GPU hung/wedged' The specs are: Pentium 4 2.4GHz 1GB DDR RAM 40GB PATA HDD Intel 845GL chipset (8MB framebuffer, 64MB shared system memory set in the BIOS)

    Read the article

  • Ubuntu 12.10 Unity Dash transparency problem

    - by madox2
    I have just upgraded my Ubuntu 12.04 to 12.10 and there is following problem. When I press super button to show Unity Dash I get wrong background image behind the dash box. Especially I can see part of the bottom of the screen. Also when I set transparency to top panel the background behind is not correct. Here is an example with Mc Duck picture: Unity Mc Duck example Do you have any ideas whats wrong? My system preferences: Ubuntu 12.10 32-bit Intel® Pentium(R) CPU G840 @ 2.80GHz × 2 GeForce GTS 450/PCIe/SSE2 Any help will be highly appreciated!

    Read the article

  • why my ubuntu always runs on low-grahphic mode?

    - by sam
    My graphic card is NVIDIA GTX 460, and ubuntu is ubuntu 10.04. I have reinstalled graphic driver for two times,but my ubuntu shows that it runs on low-graphic mode after a period of time of driver installation process. The following is the information the computer shows. http://imgur.com/GkZUz Also, when I try to change the graphic setting of NVIDIA on ubuntu, the following information shows. http://imgur.com/SVhCc How to fix it?Thank you!!

    Read the article

  • Tips and Tools for creating Spritesheet animations

    - by Spooks
    I am looking for a tool that I can use to create sprite sheet easily. Right now I am using Illustrator, but I can never get the center of the character in the exact position, so it looks like it is moving around(even though its always in one place), while being loop through the sprite sheet. Is there any better tools that I can be using? Also what kind of tips would you give for working with a sprite sheet? Should I create each part of the character in individual layers (left arm, right arm, body, etc.) or everything at once? any other tips would also be helpful! thank you

    Read the article

  • Asus 1215n GPU driver/s don't give me a "full" OS experience

    - by AFD
    I'm use to not having specific drivers from a manufacture on my laptop when running a Linux OS and that has always been fine - there's been adequate FOSS drivers for my needs and it hasn't ruined any of my OS experience. When I bought an Asus 1215n one of the upsides to the hardware seemed to be the switchable GPU that could give lots of performance or lots more battery life and would switch on-the-fly... with Windows of course. Seems that the Nvidia driver are crap and people advise not installing them. I have some sort of workaround for vga_switcharoo (?) and the on-the-fly nature of the GPUs has turned in to a manual one :( The worst bit though (aside from shorter battery life) is the web experience with HTML5. If I visit Mozilla's Web O'Wonder site I'm told I don't have WebGL working due to driver issues. This really blows - is it possible that proprietary drivers can now ruin my web experience too?!

    Read the article

  • Why does my health bar disappear whenever my character takes amage?

    - by iQue
    Im making health bar for my game that looks like this: public void healthBar(Canvas canvas) { float healthScale = happy.getHP() / happy.getMaxHP(); Rect rect = new Rect(20, 20,(120 * (int)healthScale), 40); Paint paint = new Paint(); paint.setColor(Color.RED); canvas.drawRect(20, 20, 220 * healthScale, 40, paint) } this is called every time my game renders. When the game starts it's where I want it, but as soon as my character (happy) takes any damage, it dissapears. And I know that his hp only gets subtracted by 5 every time he gets hit. So this should not happen? example: @Startup: happy.getHP() == 100, happy.getMaxHP == 100. when damaged HP -=5, -> happy.getHP() == 95 -> healthscale == 0,95 -> 220 * 0,95 == new width for Rect(?)

    Read the article

  • Unity launcher autohide leaves "ghost" behind?

    - by Hailwood
    In 12.04 I had the launcher set to autohide, which worked perfectly. However in 12.10 I am getting a strange "ghost" issue. Take this screenshot, with me having a maximised google chrome window, mousing over the back button. As well as this, I also get another ghosting issue when I have the panel set with an opacity, whereby whatever is in approximately the middle left of the screen gets mirrored up to to panel, but only when I move/switch to a window. But that one is not so annoying as the autohide bug, how can I fix that?

    Read the article

  • Objects won't render when Texture Compression + Mipmapping is Enabled

    - by felipedrl
    I'm optimizing my game and I've just implemented compressed (DXTn) texture loading in OpenGL. I've worked my way removing bugs but I can't figure out this one: objects w/ DXTn + mipmapped textures are not being rendered. It's not like they are appearing with a flat color, they just don't appear at all. DXTn textured objs render and mipmapped non-compressed textures render just fine. The texture in question is 256x256 I generate the mips all the way down 4x4, i.e 1 block. I've checked on gDebugger and it display all the levels (7) just fine. I'm using GL_LINEAR_MIPMAP_NEAREST for min filter and GL_LINEAR for mag one. The texture is being compressed and mipmaps being created offline with Paint.NET tool using super sampling method. (I also tried bilinear just in case) Source follow: [SNIPPET 1: Loading DDS into sys memory + Initializing Object] // Read header DDSHeader header; file.read(reinterpret_cast<char*>(&header), sizeof(DDSHeader)); uint pos = static_cast<uint>(file.tellg()); file.seekg(0, std::ios_base::end); uint dataSizeInBytes = static_cast<uint>(file.tellg()) - pos; file.seekg(pos, std::ios_base::beg); // Read file data mData = new unsigned char[dataSizeInBytes]; file.read(reinterpret_cast<char*>(mData), dataSizeInBytes); file.close(); mMipmapCount = header.mipmapcount; mHeight = header.height; mWidth = header.width; mCompressionType = header.pf.fourCC; // Only support files divisible by 4 (for compression blocks algorithms) massert(mWidth % 4 == 0 && mHeight % 4 == 0); massert(mCompressionType == NO_COMPRESSION || mCompressionType == COMPRESSION_DXT1 || mCompressionType == COMPRESSION_DXT3 || mCompressionType == COMPRESSION_DXT5); // Allow textures up to 65536x65536 massert(header.mipmapcount <= MAX_MIPMAP_LEVELS); mTextureFilter = TextureFilter::LINEAR; if (mMipmapCount > 0) { mMipmapFilter = MipmapFilter::NEAREST; } else { mMipmapFilter = MipmapFilter::NO_MIPMAP; } mBitsPerPixel = header.pf.bitcount; if (mCompressionType == NO_COMPRESSION) { if (header.pf.flags & DDPF_ALPHAPIXELS) { // The only format supported w/ alpha is A8R8G8B8 massert(header.pf.amask == 0xFF000000 && header.pf.rmask == 0xFF0000 && header.pf.gmask == 0xFF00 && header.pf.bmask == 0xFF); mInternalFormat = GL_RGBA8; mFormat = GL_BGRA; mDataType = GL_UNSIGNED_BYTE; } else { massert(header.pf.rmask == 0xFF0000 && header.pf.gmask == 0xFF00 && header.pf.bmask == 0xFF); mInternalFormat = GL_RGB8; mFormat = GL_BGR; mDataType = GL_UNSIGNED_BYTE; } } else { uint blockSizeInBytes = 16; switch (mCompressionType) { case COMPRESSION_DXT1: blockSizeInBytes = 8; if (header.pf.flags & DDPF_ALPHAPIXELS) { mInternalFormat = GL_COMPRESSED_RGBA_S3TC_DXT1_EXT; } else { mInternalFormat = GL_COMPRESSED_RGB_S3TC_DXT1_EXT; } break; case COMPRESSION_DXT3: mInternalFormat = GL_COMPRESSED_RGBA_S3TC_DXT3_EXT; break; case COMPRESSION_DXT5: mInternalFormat = GL_COMPRESSED_RGBA_S3TC_DXT5_EXT; break; default: // Not Supported (DXT2, DXT4 or any compression format) massert(false); } } [SNIPPET 2: Uploading into video memory] massert(mData != NULL); glGenTextures(1, &mHandle); massert(mHandle!=0); glBindTexture(GL_TEXTURE_2D, mHandle); commitFiltering(); uint offset = 0; Renderer* renderer = Renderer::getInstance(); switch (mInternalFormat) { case GL_RGB: case GL_RGBA: case GL_RGB8: case GL_RGBA8: for (uint i = 0; i < mMipmapCount + 1; ++i) { uint width = std::max(1U, mWidth >> i); uint height = std::max(1U, mHeight >> i); glTexImage2D(GL_TEXTURE_2D, i, mInternalFormat, width, height, mHasBorder, mFormat, mDataType, &mData[offset]); offset += width * height * (mBitsPerPixel / 8); } break; case GL_COMPRESSED_RGB_S3TC_DXT1_EXT: case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT: case GL_COMPRESSED_RGBA_S3TC_DXT3_EXT: case GL_COMPRESSED_RGBA_S3TC_DXT5_EXT: { uint blockSize = 16; if (mInternalFormat == GL_COMPRESSED_RGB_S3TC_DXT1_EXT || mInternalFormat == GL_COMPRESSED_RGBA_S3TC_DXT1_EXT) { blockSize = 8; } uint width = mWidth; uint height = mHeight; for (uint i = 0; i < mMipmapCount + 1; ++i) { uint nBlocks = ((width + 3) / 4) * ((height + 3) / 4); // Only POT textures allowed for mipmapping massert(width % 4 == 0 && height % 4 == 0); glCompressedTexImage2D(GL_TEXTURE_2D, i, mInternalFormat, width, height, mHasBorder, nBlocks * blockSize, &mData[offset]); offset += nBlocks * blockSize; if (width <= 4 && height <= 4) { break; } width = std::max(4U, width / 2); height = std::max(4U, height / 2); } break; } default: // Not Supported massert(false); } Also I don't understand the "+3" in the block size computation but looking for a solution for my problema I've encountered people defining it as that. I guess it won't make a differente for POT textures but I put just in case. Thanks.

    Read the article

  • I want to learn to program in SDL C++where do i start? I want to learn only what i need to to start making 2d games [on hold]

    - by user2644399
    Lazyfoo of Lazyfoo.net of the SDL 2d tutorial wrote that in order for me to start game programming in SDL, I need to know these concepts well; Operators, Controls, Loops, Functions, Structures, Arrays, References, Pointers, Classes, Objects how to use a template and Bitwise and/or. I want to know the fastest way to learn as much as I need of basic c++ that would allow me to make 2d games. Thanks in advance.

    Read the article

  • Switching to workspaces view shows buggy blue background

    - by G1i1ch
    When switching to workspaces view everything the background turns blue. Same happens when I switch between multiple windows of the same app too. Happening after having a try with gnome shell out of curiosity. Installed through official repos like normal. Tried it out but switched back, anyone have an idea of why this is happening? Got an Intel GPU and Unity 3d. If anyone can give me some direction, thanks a lot. Update: Looks like during the switch somehow opengl was disabled. glxinfo returns: name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". This is very distressing, all I wanted to do was try out gnome3. Does anyone have an idea on how I can get opengl back? [update] Ok I found out what happened. Apparently it's not that hard to accidentally install an nvidia driver. All I had to do was remove all the stuff that had nvidia in it and I got 3d back! For anyone else, this is how I found out: check out Xorg.0.log `$ cat / var/log/Xorg.0.log | more` if you see a line like this somewhere `(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)` you got an nvidia problem Thanks everyone for trying to help :D

    Read the article

  • Radeon HD 6290 terrible performance on a certified laptop

    - by dac
    I bought Asus K53U laptop, which is Ubuntu certified with pre-installed 11.10. The graphic card is Radeon HD 6290 but 720p playback is terrible. Even page scrolling in Firefox is very laggy. Proprietary drivers are installed by default. How is this possible, why is the laptop Ubuntu certified if the performance is poor? Any solution to this? I just did apt-get autoremove, and after that, this message came out in terminal: Error inserting vesafb (/lib/modules/3.0.0-15-generic/kernel/drivers/video/vesafb.ko): No such device Could that be the problem?

    Read the article

  • XNA 4.0, Combining model draw calls

    - by MayContainNuts
    I have the following problem: The levels in my game are made up of a Large Quantity of small Models and because of that I am experiencing frame rate problems. I already did some research and came to the conclusion that the amount of draw calls I am making must be the root of my problems. I've looked around for a while now and couldn't quite find a satisfying solution. I can't cull any of those models, in a worst case scenario there could be 1000 of them visible at the same time. I also looked at Hardware geometry Instancing, but I don't think that's quite what I'm looking for, because the level consists of a lot of different parts. So, what I'd like to do is combining 100 or 200 of these Models into a single large one and draw it as a whole 'chunk'. The whole geometry is static so it wouldn't have to be changed after combining, but different parts of it would have to use different textures (I think I can accomplish that with a texture atlas). But I have no idea how to to that, so does anybody have any suggestions?

    Read the article

  • Alternative to NV Occlusion Query - getting the number of fragments which passed the depth test

    - by Etan
    In "modern" environments, the "NV Occlusion Query" extension provide a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? ... ?

    Read the article

  • Cannot use second display with 12.04 and Intel 2000/3000

    - by Carolyn Marenger
    I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

    Read the article

  • About floating point precision and why do we still use it

    - by system_is_b0rken
    Floating point has always been troublesome for precision on large worlds. This article explains behind-the-scenes and offers the obvious alternative - fixed point numbers. Some facts are really impressive, like: "Well 64 bits of precision gets you to the furthest distance of Pluto from the Sun (7.4 billion km) with sub-micrometer precision. " Well sub-micrometer precision is more than any fps needs (for positions and even velocities), and it would enable you to build really big worlds. My question is, why do we still use floating point if fixed point has such advantages? Most rendering APIs and physics libraries use floating point (and suffer it's disadvantages, so developers need to get around them). Are they so much slower? Additionally, how do you think scalable planetary engines like outerra or infinity handle the large scale? Do they use fixed point for positions or do they have some space dividing algorithm?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >