Search Results

Search found 64841 results on 2594 pages for 'linux on system z'.

Page 40/2594 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by Mindful

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

  Read the article

• Address VMWare Fusion Linux guest by hostname?

  - by amrox

  I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

  Read the article

• Emails Generated From Our Linux Server are Blocked By Our Exchange Server (That Has Barracuda)

  - by Scott

  We have our company website hosted on a Linux machine. It is sending mail via postfix. The emails are working and being sent to all email clients like Gmail. However, we are not receiving the emails on our exchange server. When we look at the logs, we see that the connection is being refused, presumably by the exchange server. postfix/qmgr[11865]: DA6D42FF13: from=<[email protected]>, size=3166, nrcpt=1 (queue active) postfix/smtp[12474]: connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused postfix/smtp[12474]: DA6D42FF13: to=<[email protected]>, relay=none, delay=172915, delays=172914/0.03/0.07/0, dsn=4.4.1, status=deferred (connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused) We do run Barracuda. We cannot telnet from the linux machine to our mail server b/c we get the same message.

  Read the article

• Programs on startup in Linux

  - by oneat

  How does look making programs to start on sytartup on linux. (In windows we have registry)

  Read the article

• typesetting system

  - by itun

  All my life I used Microsoft Office on Windows for document writing and then Libre(Open)Office on Linux. This is not a bad software, but not perfect and I have some complaints. Now on my usual desktop I have Linux. I heard from people who work a lot with documents of different type and complexity (diagrams, articles, document design, presentation) that latex is a perfect thing. I have spent two days exploring Latex and my opinion as a beginner that it is out-of-date (the concepts of Latex language). The language is not intuitive and sometimes even complex. Can somebody advise another software product for document writing?

  Read the article

• Linux (non-transparent) per-process hugepage accounting

  - by Dan Pritts

  I've recently converted some java apps to run with linux manually-configured hugepages. I've got about 10 tomcats running on a system and I am interested in knowing how much memory each one is using. I can get summary information out of /proc/meminfo as described in Linux Huge Pages Usage Accounting. But I can't find any tools that tell me about the actual per-process hugepage usage. I poked around in /proc/pid/numa_stat and found some interesting information that led me to this grossity: function pshugepage () { HUGEPAGECOUNT=0 for num in `grep 'anon_hugepage.*dirty=' /proc/$@/numa_maps | awk '{print $6}' | sed 's/dirty=//'` ; do HUGEPAGECOUNT=$((HUGEPAGECOUNT+num)) done echo process $@ using $HUGEPAGECOUNT huge pages } The numbers it gives me are plausible, but i'm far from confident this method is correct. Environment is a quad-CPU dell, 64GB ram, RHEL6.3, oracle jdk 1.7.x (current as of 20130728)

  Read the article

• Why most supercomputer using linux?

  - by sdc

  http://news.bbc.co.uk/2/hi/technology/10187248.stm almost the entire supercomputer using Linux as operating system.

  Read the article

• Triple (3) Monitors under Linux

  - by widgisoft

  I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

  Read the article

• Install Rails on linux [migrated]

  - by Jseb

  I am trying to install Ruby on Rails. and i have followed the following link for the install https://www.digitalocean.com/community/articles/how-to-install-ruby-on-rails-on-ubuntu-12-04-lts-precise-pangolin-with-rvm. This link was helpful i was able to run it, and everything, however as soon has i restarted the computer i then go into my apps and run it again with rails s and this message occurs. The program 'rails' is currently not installed. You can install it by typing: sudo apt-get install rails But work before, what should i do, do i need to set the path of somesort?? I am not that great in linux so bear with me. I am using linux ubuntu 12.04 desktop and my user is john Thanks in advance

  Read the article

• Couldn't start mysql service in linux

  - by Haseena

  Iam trying to install one version of mysql in a LINUX machine. The system contain already another version of mysql installation. I prefer manual installation. Copy the exctracted tarball into a location and create symbolic link to that. I wish to install my mysql version without affecting already installed mysql version in the system. I created mysqld as service. But It couldn't start. When Iam trying to start this mysqld process, it shows an error like: Starting MySQL............................................................ ......................................... ERROR! The server quit without updating PID file (/var/lib/mysql/Test.pid). Please help me, is any wrong with my installation??? I follow the below mentioned link for installion : http://code.openark.org/blog/mysql/manually-installing-multiple-mysql-instances-on-linux-howto Thanks in Advance

  Read the article

• Map ftp servers as network drives in Ubuntu Linux

  - by Carl

  Hi everybody! I'm a new Linux user, just switched over from Windows. I've got a couple FTP servers I connect to on a regular basis through sftp. I was wondering if there was a way to, as we say in windows, map them as network drives in Linux, so I can just copy stuff into a drive or folder and it will just map it to the server by ftp. That would be pretty cool. Anybody know how this would be possible, and how to do it? I Can't see to find anything in the literature. I'm running Ubuntu 9.04. Thanks!

  Read the article

• Linux software Raid 10 no superblock

  - by Shoshomiga

  I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

  Read the article

• GUI session from Mac to Linux, over WAN

  - by kellogs

  Closest thing I could find here was this I am on Mac OS 10.5.6 with X server installed. This is the machine I am trying to get GUI session data onto. There is an Ubuntu 11.10 Linux on which I have installed an X server and GDM. This is the machine where the GUI session data should come from. Currently, I got to the point where Linux listenes on port TCP 6000 for its clients. 1 - how do I swap port 6000 for port 6767 ? 2 - how do I connect to 6767 from my Mac ? Thanks

  Read the article

• SVN Notifier for linux?

  - by mnml

  I would like to know if there is any version of this software for linux or any equivalent: svn notifier

  Read the article

• linux + automated rsync command

  - by Diana

  my target is to copy /tmp/my_file from 10.10.10.1 to my Linux machine without login and password , I set the passwords file with the right password - secret123 so rsync should work , please advice why I get Permission denied. Remark - 10.10.10.1 address is linux machine version – red hat 5.3 rsync -WavH --password-file=/tmp/passwords --progress [email protected]:/tmp/my_file . Permission denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) more /tmp/passwords secret123 ls -ltr passwords -rwxr-xr-x 1 root root 10 Sep 12 17:32 passwords

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• No break compatible with Linux box?

  - by Somebody still uses you MS-DOS

  I'm buying this unit from deal extreme: it's a bitorrent downloader, with NAS capability. I'm interested in sharing an external HD in it, with media and backup purposes. I'm afraid of energy problems (don't know if this is the correct term), corrupting my mounted drives (like after a storm), so I thought about buying a No Break that sends a "signal" to my Linux box, and a script in my Linux box would unmout everything to avoid problems. Do this "No Break signal" feature exists? Do you have model suggestions? Thanks!

  Read the article

• Shrinking physical volumes in LVM on a Linux Guest in ESXi 5.0

  - by Stew

  The problem: Linux guest (OpenSuse 12.1), with multiple virtual disks attached. 3 disks are in a logical volume, two of which are exactly 2TB. None of the disks are independent, and due to the backup software we use, cannot be independent. When the two 2TB virtual disks are "dependent", the snapshot fails stating that the file is too large for the datastore. When I put those two disks in independent mode, snapshots work fine (the other disk is 1.8TB). I have therefore concluded that even shrinking the two physical disks by 100GB should solve the problem, however I am having trouble conceptualizing how to go about getting those disks smaller without breaking the LVM entirely. The actual LV has 1.3TB free, so there is plenty of space to shrink with. What I need to accomplish: Deallocate 100GB from the two, 2TB virtual disks within the linux guest. Shrink the two virtual disks by 100GB within vsphere (not as complicated). Are there any vsphere/LVM gurus that can give me a clue?

  Read the article

• seamless mode remote desktop connection from linux to windows

  - by mateusz.fiolka

  I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

  Read the article

• Sharing accounts between multiple computers running Ubuntu Linux

  - by john

  My school has a computer lab full of machines running Red Hat Linux. They have it set up so that you can log into any computer in the lab, and it automatically loads your desktop, home directory, etc, which makes it so all computers in the lab look the same to you, regardless or which one you're using. I have two computer at home running Ubuntu Linux. Could I do this same thing with my computers at home? What's it called, and how do I find documentation on how to set it up? Thanks!

  Read the article

• save as pdf in linux

  - by Neilvert Noval

  I have seen how simple it is for Mac OS to generate pdf from a document without additional software to install. But I am looking for this functionality in Linux. One scenario, for example, if I have myDocument.txt that contain an article, how can I convert this into pdf? My next question is, assuming that myDocument.txt is a 3-paged document, will it generate a 3-page continuous pdf and not just 3 separate pdfs? Any tools for linux that does this? (GUI is fine, but commandline is preferable)

  Read the article

• Java Development in Linux

  - by Zac

  I'm a developer and am brand new to Linux (Ubuntu): I'm wondering what the "best practices dictate" for what FHS directories to install various tools to. Things I'll be installing: Eclipse & plugins GlassFish SVN ...etc. I see that /opt is for holding additional ("optional") software packages, but also see /usr as a place for utils and apps. In another post a user recommended I create an entire partition for /srv alone, and to do my staging there (I assume he meant that /srv is where GlassFish and other servers should go?). So basically: what FHS directories do Linux developers use for which type of tools? Thanks for any input here

  Read the article

• Storage of various linux config files

  - by stantona

  I'm using git to track/store all my various config files required for linux. They're organized as if they live in my home directory, eg: .Xresources .config/ Awesome rc.lua .xmodmap .zshrc vim/ <- submodule emacs/ <- submodule etc I use git submodules for other things like vim/emacs configuration (since I also want to keep those separate repos). I'm thinking of creating a shell script to create the various links to these files. The goal is to make it easier to setup another linux painlessly. Is this a reasonable idea? Is there a preferred approach? I'm mostly interested in hearing how others people store their configs.

  Read the article

• Free / Cached / Available memory on Linux

  - by pkoraca

  I have read that linux uses free memory for caching, to make system faster. However, both Nagios and Paessler PRTG monitoring system show me that my memory usage is critical. I could change Nagios mem_usage script to sum free and cached memory, but would that be correct information? I doubt that they misunderstood Linux memory usage. Lets say I have 8 GB RAM. 5 GB are used, 2 GB is cached, and I have 1 GB of free memory. Real available memory should be free+cached (3 GB)? If some new application would need additional 3 GB RAM, could it take everything from cache and free without using swap, or is there a minimum that should be in cache? Real example: $ cat /proc/meminfo MemTotal: 5984256 kB MemFree: 137052 kB Buffers: 140484 kB Cached: 3439616 kB SwapCached: 244 kB Active: 3148824 kB Inactive: 2341768 kB ... My monitoring tools show that I have 137 MB free RAM, however I have ~3,5 GB in Cache. Thanks!

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >