Search Results

Search found 1627 results on 66 pages for 'scenarios'.

Page 40/66 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• Very long (>300s) request processing time on Apache Server serving static content from particular IP

  - by Ron Bieber

  We are running an Apache 2.2 server for a very large web site. Over the past few months we have been having some users reporting slow response times, while others (including our resources, both on the internal network and our home networks) do not see any degradation in performance. After a ton of investigation, we finally found a "Deny from none" statement in our configuration that was causing reverse DNS lookups (which were timing out) that solved the bulk of our issues, but we still have some customers that we are seeing in the Apache logs (using %D in the log format) with request processing times of 300s for images, css, javascript and other static content. We've checked all Deny / Allow statements for reoccurrence of "none", as well as all other things we know of that would cause reverse DNS lookups (such as using "REMOTE_HOST" in rewrite rules, using %a instead of %h in our log format configuration) as well as verified that HostnameLookups is set to "Off". As an aside, we've also validated that reverse DNS lookups for folks having this problem do not time out - so I'm fairly certain DNS is not an issue in this case. I've run out of ideas. Are there any Apache configuration scenarios that someone can point me to that I might be missing that would cause request times for static content to take so long only for certain users? Thank you in advance.

  Read the article

• I am looking for a tool to measure or detect "unresponsiveness" of a desktop PC

  - by Tom H

  I have a client that provides some server systems to a hospital, and a support ticket was raised that the desktop application was hanging waiting for the server. We did some extensive testing and its pretty clear that the server is responsive, and the network is fine, and that the problem is on the client end. (no requests are received during the hang etc...) We take a look at the desktop machines and they should be fine, so we raise tickets with the software vendor who says that it must be the hardware, the hardware company says that it is the software, etc etc Anyway, so talking to the nurses, they say that these machines often "hang" for 30 seconds at a time, and sometimes during important moments where they need to get data for a patient who is unwell, such as charts and status. So I want to stick a client on these machines that would be able to detect arbitrary "unresponsiveness" of the keyboard/mouse and log that for analysis later. Obviously I am wary to suggest some application that takes resources and makes the problem even worse, so I would interested to see any tools that would detect these (is it correct to say that the keyboard interrupts are being discarded?) scenarios by looking for the OS discarding the interrupts, or whatever is appropriate here. so go on then serverfault, here is your chance to save a life.... ;-) Edit: I am starting to think that some of the tools associated with real time systems might be appropriate, at least as a diagnostic.

  Read the article

• Processing-time billing in Amazon EC2

  - by Rafael Almeida

  Hi all! I think my question is fairly basic, but I would like a clarification: in the Pricing part of AWS we can see that Amazon charges people around .10 by the 'instance computing hour'. I've seen in a blog post somewhere (can't remember where exactly, and even if I did I think it was in Portuguese anyway) that this way your minimum monthly payment would be $72 (= .10 $s/hour x 24 hours x 30 days). Is this correct? (I don't think it is!) In my understanding is that this 'virtual computing time' is only used when your machine is actually doing something (serving pages, serving the admin via ssh, whatever), so real billable usage would be less than 720 hours/month in most webserver scenarios. Is my view correct? If it is, then it leads me to another question: is it economically interesting to buy access to one of these instances for testing? I mean, would I have the 'freedom' to 'forget' about it for a month and receive a very-close-to-zero (as in, a few cents) bill? Do you do it/know of anybody who does? Any thoughts on the matter (as in, "yes, it's a good idea", or "yes, but there's this 'gotcha': ...", or "no, nobody does it because of...")? PS: sorry for the loong question text. I highlighted the main questions for easy view. Also, I'm not sure if this question is actually more than one and if it's desirable for the community, so, sorry if it is too! Thanks in advance!

  Read the article

• IP-dependent local port-forwarding on Linux

  - by chronos

  I have configured my server's sshd to listen on a non-standard port 42. However, at work I am behind a firewall/proxy, which only allow outgoing connections to ports 21, 22, 80 and 443. Consequently, I cannot ssh to my server from work, which is bad. I do not want to return sshd to port 22. The idea is this: on my server, locally forward port 22 to port 42 if source IP is matching the external IP of my work's network. For clarity, let us assume that my server's IP is 169.1.1.1 (on eth1), and my work external IP is 169.250.250.250. For all IPs different from 169.250.250.250, my server should respond with an expected 'connection refused', as it does for a non-listening port. I'm very new to iptables. I have briefly looked through the long iptables manual and these related / relevant questions: http://serverfault.com/questions/57872/iptables-question-forwarding-port-x-to-an-ssh-port-of-different-machine-on-the-n http://serverfault.com/questions/140622/how-can-i-port-forward-with-iptables However, those questions deal with more complicated several-host scenarios, and it is not clear to me which tables and chains I should use for local port-forwarding, and if I should have 2 rules (for "question" and "answer" packets), or only 1 rule for "question" packets. So far I have only enabled forwarding via sysctl. I will start testing solutions tomorrow, and will appreciate pointers or maybe case-specific examples for implementing my simple scenario. Is the draft solution below correct? iptables -A INPUT [-m state] [-i eth1] --source 169.250.250.250 -p tcp --destination 169.1.1.1:42 --dport 22 --state NEW,ESTABLISHED,RELATED -j ACCEPT Should I use the mangle table instead of filter? And/or FORWARD chain instead of INPUT?

  Read the article

• Linux - real-world hardware RAID controller tuning (scsi and cciss)

  - by ewwhite

  Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

  Read the article

• SQL Server Offsite Backups

  - by Eric Maibach

  We have about !TB of SQL Server databases, and these databases generate about 200GB of data changes each day. Up to this point we have been doing Weekly full backups, daily diff backups, and hourly transaction log backups. The full and diff backups are backed up to tape and taken offsite each day. We have been trying to move away from tapes, and our IT department purchased a Barracuda Backup device that backups up data and then sends it offsite using our internet connection. I have been trying to get this to work for our SQL Server backups, and have ran into a number of problems. I normally like to just use SQL Server to perform backups instead of trying to use a agent, so that is what I tried first. However the Barracuda device was not able to dedup these files very well, so it ended up being to much data to try to send offsite and to archive. I then tried installing the Barracuda agent and using it to backup the SQL Server databases. However the problem I am having there is that on some of the database servers I also have files that need backed up, and I cannot find a way to create seperate backup schedules for the file backups and the SQL Server backups. Barracuda only does full or transaction log backups. So if I want to do hourly transaction log backups I end up doing a file system backup every hour (which is not good), or if I only schedule the backups to run once a night I either have to do a full backup every night, or only do a transaction backup once a day. None of these scenarios are good options. My question is, how is everyone else getting their large SQL Server database backups offsite. Are you just using tape, or have you found a offsite backup device that works well? Is anybody else using Barracuda to backup their SQL Server databases? If you do, then how do you have it setup?

  Read the article

• How to replicate a windows servers (IIS,Files,ConfigurationState)?

  - by Geo

  Maybe a better question is: What is the closest competitor for DoubleTake? I am looking to replicate a windows production server in case it fails have a immediate backup. Any idead? NOTE 1: I forget to add that this server is on the EC2 Amazon Cloud. NOTE 2: The main situation we have is recreating the configuration settings like IIS, FTP Server, SQL Server, SVN Server. NOTE 3: So far I have been giving three options as answers for my original question: AppAssurance -- After talking to their sales team they do not support Amazon as cloud provider. Basically there is a technical need to be able to reboot from a disk or similar media. So ESX Virtual machine environment will work, but not the EC2. Acronis -- which works as a backup in ghost style. This will work for other type of scenarios. Use the Amazon EC2 API -- This option is ideal, but only works if you are developing a cloud application rather than hosting a regular application in a cloud scenario. This means that I am still looking for the answer. Any other ideas.

  Read the article

• Authenticate domain-user credentials on unjoined virtual machine?

  - by bwerks

  Hi all, This question may sound silly, and perhaps a bit insane, but--is there any way to run a process on a machine not joined to a domain using credentials from a user in that domain? In my case, I'm running virtual machines installed with release binaries from our build process, as well as Visual Studio. Visual Studio is there to debug our release binaries, however it's being executed with vm-local user credentials. This means that it can't authenticate to our TFS deployment when executing "tf.exe view" to utilize our Source Server for debugging. Team Explorer manages to authenticate to TFS using a UI prompt, however I suspect that it's because we supply it with the TFS deployment's URI, and it's designed to display a prompt to facilitate workgroup scenarios; i.e. it's not like we're getting it for free. My instincts tell me the only way to authenticate on this vm is to join it or somehow form a one-way trust or something, but is there an easier way? For automation we're going to want to script this eventually, but I'm first surveying the feasibility of the thing.

  Read the article

• Windows 7 search does not return results from indexed folders

  - by Dilbert

  I am experiencing this issue over and over again and I just cannot seem to find the answer. It doesn't make sense, but search simply does not return results from folders that certainly have these files inside. It's weird that this technology exists for more than 5 years now (it could be added to Windows XP as an addon), and they still haven't got it right. My folder contains 10 image files with .png extensions. Two scenarios: Scenario 1: I exclude the folder using Indexing options. Search works. Scenario 2: I turn on indexing for this folder. Search does not work. Of course, Agent Ransack returns results every time. When I check Advanced options for the Indexing options inside control panel, .png files are checked in the File Types tab, using the "File Properties filter". What's the deal with this? [Edit] To clarify, this doesn't happen with all folders, but does with more than one. For the "problematic" folders, even *.* doesn't return a single result. I found some advice to clear the archive and readonly attributes for all files (doesn't make sense, but hey), but it didn't work. Indexing status in Control panel is: Indexing complete. 100,000 items indexed. Folder is included in the list. File types list contains the .png extension (although it doesn't work with any filter, not even *.*).

  Read the article

• Server 2008 Print Redirection is failing but only on 16Bit apps

  - by ian

  the main programmer for SoEasyAccounting and we are installing to Server 2008 Standard service pack 1. We install to 2003 with no problems. Important to understand that the print failure only happens in certain circumstances: Note: We use a standard Windows printer selection box to choose the printer Terms used Superbase = a program language that uses ntvdm.exe (Windows process hosting 16 bit apps) Local Printer = printing to a driver loaded onto the Server 2008 Redirect Printer = printing to a automatically established remote printer through an RDP connection Printing Scenarios Server 2008 - 1: Print from notepad to a Redirected Printer = works Server 2008 - 2: Print from Superbase to a Local Printer = works Server 2008 - 3: Print from Superbase to a Redirected Printer = fail Server 2003 - 4: Print from Superbase to a Redirected Printer = works Results The print causes a message in the drivers print queue of Local Downlevel Document, no print though and Superbase recognises that the "Print command failed". Eventvwr has no related issues to the print fail Any help greatly appreciated. So far 2 days spent trying to resolve and here goes my weekend :( unless someone has an idea :) Things I have Tried i. Switching on/off Easy print ii. Loading copy of redirected driver on server

  Read the article

• What's the best / easiest way to combine two mailboxes on Exchange 2007?

  - by jmassey

  I've found this and this(2) (sorry, maximum hyperlink limit for new users is 1, apparently), but they both seem targeted toward much more complex cases than what I'm trying to do, and I just want to make sure I'm not missing some better approach. Here's the scenario: 'Alice' has retired. 'Bob' has taken over Alice's position. Bob was already with the organization in a different but related position, and so they already have their own Exchange account with mail, calendars, etc., that they need to keep. I need to get all of Alice's old mail, calendar entries, etc., merged into Bob's existing stuff. Ideally, I don't want to have all of Alice's stuff in a separate 'recovery' folder that Bob would have to switch back and forth between to look at older stuff; I want it all just merged into Bob's current Inbox / Calendar. I'm assuming (read: hoping) that there's a better way to do this than fiddling with permissions and exporting to and then importing from a .pst. Office version is 2007 for everybody that uses Exchange, if that helps. Exchange is version 8.1. What (preferably step-by-step - I'm new to Exchange) is the best way to do this? I can't imagine this is an uncommon scenario, but my google-fu has failed me; there seems to be nothing on this subject that isn't geared towards far more complex scenarios. (2): h t t p://technet.microsoft.com/en-us/library/bb201751%28EXCHG.80%29.aspx

  Read the article

• Apache, Tomcat and mod_jk for load balancing

  - by pHk

  Hi guys. I've set-up a basic Apache (2.2.x) and Tomcat (6.0.x) set-up using mod_jk for load balancing using the worker.properties file. Preliminary testing seems to show that this works relatively well, and it was quite easy to set-up. However; the fact that it was so easy to set-up has got me a little worried. We're dealing with 100 - 300 concurrent users using the same web application (deployed on 2 or 3 Tomcat instances). I have done a little Googling and looking around on here and there seems to be more than 1 way to accomplish this (one example on here used a balancer:// style URL, which I've never seen before in an Apache config). For example, one question I ask myself is how reliable the load detection on mod_jk really is (Busyness, Session, Request, etc). In your experience, does this set-up prove to be reliable in real world scenarios? Any pointers on improvements, pit falls or interesting literature/articles? I've worked with Apache before, but am in no way an expert. Thanks in advance.

  Read the article

• Router vs switch in a LAN [closed]

  - by servernewbie

  If I have a LAN and and connect it with a switch, I understand it uses a CAM table to route packets in layer 2 (by saving mac to port relations). So far all good. However, when using a router for a LAN (ONLY for a LAN, not to connect it to "the outside" WAN/internet/etc) I get a bit confused as to how it internally processes packets. I would first split this into two router scenarios: Router with buit-in switch In this scenario, I would expect that it will act exactly as a switch with a CAM table internally. This would probably benefit a bit in speed (guessing here?) compared to the next option. Router without built-in switch Here is where I get confused. If hostA wants to send a packet to hostB, it will ARP to find hostB's MAC address and send it there. Now, if we had a switch (above scenario) this would be easy. But how does it work now in a router WITHOUT a switch? If I would guess, hostA would send an Ethernet frame with hostB's MAC address to the line. The router would fetch the packet (even though the router has another MAC address, it would still fetch this packet even if it only contains hostB's MAC address). It would strip the Ethernet frame header and check the IP, and then check its own internal ARP table again for the MAC address. Now, this would seem like a waste of resources compared to a router with a built-in switch. But maybe it does not work like that at all. Does it also contain a CAM table? If that would be true, what would then the difference between these two routers really be?

  Read the article

• Under what conditions will sendmail try to immediately resend a message instead of waiting for the standard requeue interval?

  - by Mike B

  CentOS 5.8 | Sendmail 8.14.4 I used to think that if SendMail experienced a temporary (400-class) error during delivery, it would place the message in a deferred queue (e.g. /var/spool/mqueue) and retry an hour later. For the most part, that appears to be the case. But every now and then, I'll notice log entries like this (email/domains renamed to protect the innocent :-) ) : Dec 5 01:43:03 foobox-out sendmail [11078]: qBE3l7js123022: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=124588, relay=exbox.foo.com. [10.10.10.10], dsn=4.0.0, stat=Deferred: 421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel Dec 5 01:53:34 foobox-out sendmail [12763]: qBE3l7js123022: to=<[email protected]>, delay=00:10:31, xdelay=00:00:00, mailer=relay, pri=214588, relay=exbox.foo.com., dsn=4.0.0, stat=Deferred: 452 4.3.1 Insufficient system resources Dec 5 02:53:35 foobox-out sendmail [23255]: qBE3l7js123022: to=<[email protected]>, delay=01:10:32, xdelay=00:00:01, mailer=relay, pri=304588, relay=exbox.foo.com. [10.10.10.10], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) Why did Sendmail try again just 10 minutes after the first attempt and then wait another hour before trying again? If this is expected behavior, what scenarios will cause this faster requeue interval to occur?

  Read the article

• Full-text search locks up database - error 0x8001010e

  - by Stewart May

  Hi We have a full-text catalog that is populated via a job every 15 minutes like so: ALTER FULLTEXT INDEX ON [dbo].[WorkItemLongTexts] START INCREMENTAL POPULATION We have encountered a problem where the database containing this catalog locks up. There are a couple of scenarios, we either see the job execute and the process hang with with a wait type of UNKNOWN TOKEN, or we see another process hang with a wait type of MSSEARCH. Once this happens the job continues to run but informs us that the request to start a full-text index population is ignored because a population is currently active. Looking in the full text log files we see the following error each time these problems occur: 2010-04-21 08:15:00.76 spid21s The full-text catalog health monitor reported a failure for full-text catalog "XXXFullTextCatalog" (5) in database "YYY" (14). Reason code: 0. Error: 0x8001010e(The application called an interface that was marshalled for a different thread.). The system will restart any in-progress population from the previous checkpoint. If this message occurs frequently, consult SQL Server Books Online for troubleshooting assistance. This is an informational message only. No user action is required."'' The only solution is to restart the SQL Server service and then the full text service. This is now occuring on a daily basis now so any help would be appreciated.

  Read the article

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• What user information is exposed via a browser?

  - by ipso

  Is there a function or website that can collect and display ALL of the user information that can be obtained via a browser? Background: This of course does not account for the significant cross-reference abilities of large corporations to collate multiple sources and signals from users across various properties, but it's a first step. Ghostery is just a great idea; to show people all of the surreptitious scripts that run on any given website. But what information is available – what is the total set of values stored – that those scripts can collect from? If you login to a search engine and stay logged in but leave their tab, is that company still collecting your webpage viewing and activity from other tabs? Can past or future inputs to pages be captured – say comments on another website? What types of activities are stored as variables in the browser app that can be collected? This is surely a highly complex question, given to countless user scenarios – but my whole point is to be able to cut through all that – and just show the total set of data available at any given point in time. Then you can A/B test and see what is available with in a fresh session with one tab open vs. the same webpage but with 12 tabs open, and a full day of history to boot. (Latest Firefox & Chrome – on Win7, Win8 or Mint13 – although I'd like to think that won't make too much of a difference. Make assumptions. Simple is better.)

  Read the article

• Are ZFS snapshots + S3 a viable backup system for several VMs and general fileserver storage?

  - by AllanA

  I've been tasked with setting up a backup system for my small office (around 12 people). Most of our production stuff is on the AWS cloud, so what I need to back up are some small office/development files (under 100G right now), plus our operational VMs and development, which round out to a bit under 1T. I just need something reliable, convenient, and straightforward. I'm comfortable with Linux, FreeBSD, and to some extent Solaris 10, so I'm leaning toward a full server rather than an appliance system ala Openfiler or FreeNAS. What I'm contemplating is a small fileserver for general storage and nightly backups of the virtual machines, followed up by an offsite backup to Amazon's S3 storage service. It'd be the usual incremental backups nightly and full backup weekly. My question is if using ZFS snapshots, both locally and dumped to S3 via 'zfs send [-i]', is a viable backup tool? Or should I stick to using Duplicity, or some other method entirely? ZFS snapshots on the internal fileserver/backup machine sound like a perfect way to provide quick and convenient data recovery, so I'm likely to go with that for local redundancy. (If you folks see scenarios where relying on ZFS snapshots would be worse than a more traditional archiving backup, feel free to convince me.) But are snapshots flexible enough to lean on for recovery from the loss of my backup server? Or am I better off with something more traditional? (feel free to recommend free or commercial backup solutions you favor.)

  Read the article

• What is the risk of introducing non standard image machines to a corporate environment

  - by Troy Hunt

  I’m after some feedback from those in the managed desktop or network security space on the risks of introducing machines that are not built on a standard desktop image into a large corporate environment. This particular context relates to the standard corporate image (32 bit Win XP) in a large multi-national not being suitable for a particular segment of users. In short, I’m looking at what hurdles we might come across by proposing the introduction of machines which are built and maintained by a handful of software developers and not based on the corporate desktop image (proposing 64 bit Win 7). I suspect the barriers are primarily around virus definition updates, the rollout of service packs and patches and the compatibility of existing applications with the newer OS. In terms of viruses and software updates, if machines were using common virus protection software with automated updates and using Windows Update for service packs and patches, is there still a viable risk to the corporate environment? For that matter, are large corporate environments normally vulnerable to the introduction of a machine not based on a standard image? I’m trying to get my head around how real the risk of infection and other adverse events are from machines being plugged into the network. There are multiple scenarios outside of just the example above where this might happen (i.e. a vendor plugging in a machine for internet access during a presentation). Would a large corporate network normally be sufficiently hardened against such innocuous activity? I appreciate the theory as to why policies such as standard desktop images exist, I’m just interested in the actual, practical risk and how much a network should be protected by means other than what is managed on individual PCs.

  Read the article

• How do I set up postfix to store e-mail in a file instead of relaying it?

  - by GomoX

  I want to run a staging copy of a production server on a local environment. The system runs a PHP application, which sends e-mail to customers in various scenarios and I want to make sure no e-mail is ever sent from the staging environment. I can tweak the code so it uses a dummy e-mail sender, but i'd like to run the exact same code as the production environment. I can use a different MTA (Postfix is just what we use in production), but I'd like something that is easy to set up under Debian/Ubuntu :) So, I'd like to set up the local Postfix install to store all e-mail in (one or more) files instead of relaying it. Actually, I don't really care how it's stored as long as it's feasible to check the e-mail that was sent. Even a set up option that tells postfix to keep the e-mail in the mail queue would work (I can purge the queue when I reload the staging server with a copy from production). I know this is possible, I just haven't found any good solution online for what seems like a fairly common need. Thanks!

  Read the article

• Calculating memory footprints using /proc/sysvipc/shm

  - by MarkTeehan

  This is for a SLES 10 database server. One of my servers runs three databases and three app servers; I am analyzing how their shared memory segments grow and shrink to avoid intermittent out-of-memory scenarios. "Top" is hot helpful for this since its calculations for RES and VIRT are inconsistent. I am doing this by matching up the contents of /proc/sysvipc/shm with memory usage reported by the database admin console. I do this by totaling up saving the contents of /proc/sysvipc/shm and then total up "bytes" for all of the segments for the offending userid. This is a large server with hundreds of segments and tens (or hundreds) of GB of allocated memory per userid. However it doesn't match up - the database management software claims to be using around 25% more memory than the total I calculate. Negligible swap space is in use, so I am ignoring that. I am running it as root so I am sure I see all shared memory segments. My question is : is all (significant) allocated memory recorded in /proc/sysvipc/shm, or is this only shared memory (*and not "un-shared" memory?). If this is incorrect, what is the correct way to calculate out the total allocated memory for each userid? Also: I believe doing a 'cat' on this file locks server IPC. I check it every 5 seconds - is it likely that this frequency could be problematic? Thanks! Mark Teehan Singapore

  Read the article

• ASP.NET, IS7 and IE8 caching?

  - by jdege

  We're suddenly having problems with some of our sites having old versions of .css and .js files show up in the browser. Generally, these problems go away, when the user clears cache in the browser. Is there something we can do either in the code or in IIS7, to convince the browser to not used the cached files? In our weirdest case, we have one customer whose users hit our site, and get an old version of a js file. They clear cache, load the page, get the current version, and the page runs fine. Then they load the file again, and suddenly have the old version, again. Any ideas as to how that might be happening? I can think of three: The browser is somehow holding on to the old version, when we clear cache, and is putting it back in the cache, before the second page load. One of our servers has an old version of the file, and while the first page load after a clear cache pulls it from one of the servers with the current version, second and subsequent page loads pull it from the server that has the old version. The first load after a clear cache goes straight to our servers, while subsequent loads pull the file from the cache on the customer's web proxy. I have to say, all three of those scenarios seem outlandishly unlikely, but it's a repeatable behavior. Any ideas?

  Read the article

• How to chain GRUB2 for Ubuntu 10.04 from Truecrypt & its bootloader (multi boot alongside Windows XP partition)?

  - by Rob

  I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back. I've searched fairly extensively for answers on Ubuntu forums and elsewhere but have not yet found a complete answer that covers all eventualities, scenarios and error messages, or otherwise they talk of legacy GRUB and not GRUB2. Ubuntu 10.04 uses GRUB2. My setup: Partitions: Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb /boot (Ext4, 1Gb) Ubuntu swap, 4Gb Ubuntu / (root) - main filesystem (20gb) NTFS share, 55Gb I know that the Truecrypt boot loader replaces the GRUB when boot up because I've already tried it on another laptop. I want boot loader screen to look something like the usual: Truecrypt Enter password: (or [ESC] to skip) password is for WindowsXP and on pressing [ESC] for it to find the Ubuntu grub to boot from Thanks in advance for your help. The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.

  Read the article

• HAProxy appsession vs cookie precedence

  - by user1139473

  I am trying to find the best solution for balancing and keeping persistence on our application behind HAProxy. Here is our basic configuration: https://gist.github.com/endzyme/1804046b23c37beba520 After playing around with taking members down and up and also reloading the haproxy (with -sf) I have noticed that appsession isn't 100% effective, it would appear that sometimes it doesn't always 'request-learn'. I also tried to add a cookie JSESSION prefix to balance in case request-learn didn't take. Unfortunately it would present scenarios where the prefix would list svr2 but it was balanced to a different server. I am assuming it's because the appsession table takes first then sticks on that before using the cookie parameter. I have not tested with using cookie as an inserted option (not prefix on existing cookie) but I am thinking it would yield similar results. My question is: Which one is checked first, appsession or cookie, and is it an immediate catch after it reads the first one, or a fall through? Also as a follow up - is it not recommended to use both in the same backend? Cookie as I understand takes less memory resources, is agnostic to reloads and has way better reliability of persistence. Appsession I assume takes less cpu resource, since it's reading not writing. (Bonus Question: is there a way to inspect appsession/cookie table map? socket show table doesn't show anything except stick-tables) Many thanks in advance, -Nick

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >