Search Results

Search found 11268 results on 451 pages for 'shweta simply'.

Page 40/451 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• The SmartAssembly Rearchitecture

  - by Simon Cooper

  You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

  Read the article

• NHibernate 3.0 and FluentNHibernate, how to get up and running&hellip;.

  - by DesigningCode

  First up. Its actually really easy. I’m not very religious about my DB tech, I don’t really care, I just want something that works.  So I’m happy to consider all options if they provide an advantage, and recently I was considering jumping from NHibernate to EF 4.0.  However before ditching NHibernate and jumping to EF 4.0 I thought I should try the head version of NHibernates trunk and the Head version of FluentNHibernate. I currently have a “Repository / Unit of Work” Framework built up around these two techs.  All up it makes my life pretty simple for dealing with databases.   The problem is the current release of NHibernate + the Linq provider wasn’t too hot for our purposes.  Especially trying to plug it into older VB.NET code.   The Linq provider spat the dummy with VB.NET lambdas.  Mainly because in C# Query().Where(l => l.Name.Contains("x") || l.Name.Contains("y")).ToList(); is not the same as the VB.NET Query().Where(Function(l) l.Name.Contains("x") Or l.Name.Contains("y")).ToList VB.NET seems to spit out … well…. something different :-) so anyways… Compiling your own version of NHibernate and FluentNHibernate.  It’s actually pretty easy! First you’ll need to install tortisesvn NAnt and Git if you don’t already have them.  NHibernate first step, get the subversion trunk https://nhibernate.svn.sourceforge.net/svnroot/nhibernate/trunk/ into a directory somewhere.  eg \thirdparty\nhibernate Then use NAnt to build it.   (if you open the .sln it will show errors in that  AssemblyInfo.cs doesn’t exist ) to build it, there is a .txt document with sample command line build instructions,  I simply used :- NAnt -D:project.config=release clean build >output-release-build.log *wait* *wait* *wait* and ta da, you will have a bin directory with all the release dlls. FluentNHibernate This was pretty simple. there’s instructions here :- http://wiki.fluentnhibernate.org/Getting_started#Installation basically, with git, create a directory, and you issue the command git clone git://github.com/jagregory/fluent-nhibernate.git and wait, and soon enough you have the source. Now, from the bin directory that NHibernate spit out, take everything and dump it into the subdirectory “fluent-nhibernate\tools\NHibernate” Now, to build, you can use rake….which a ruby build system, however you can also just open the solution and build.   Which is what I did.  I had a few problems with the references which I simply re-added using the new ones.  Once built, I just took all the NHibnerate dlls, and the fluent ones and replaced my existing NHibernate / Fluent and killed off the old linq project. All I had to change is the places that used  .Linq<T>  and replace them with .Query<T>  (which was easy as I had wrapped it already to isolate my code from such changes) and hey presto, everything worked.  Even the VB.NET linq calls. I need to do some more testing as I’ve only done basic smoke tests, but its all looking pretty good, so for now, I will stick to NHibernate!

  Read the article

• Anatomy of a .NET Assembly - Signature encodings

  - by Simon Cooper

  If you've just joined this series, I highly recommend you read the previous posts in this series, starting here, or at least these posts, covering the CLR metadata tables. Before we look at custom attribute encoding, we first need to have a brief look at how signatures are encoded in an assembly in general. Signature types There are several types of signatures in an assembly, all of which share a common base representation, and are all stored as binary blobs in the #Blob heap, referenced by an offset from various metadata tables. The types of signatures are: Method definition and method reference signatures. Field signatures Property signatures Method local variables. These are referenced from the StandAloneSig table, which is then referenced by method body headers. Generic type specifications. These represent a particular instantiation of a generic type. Generic method specifications. Similarly, these represent a particular instantiation of a generic method. All these signatures share the same underlying mechanism to represent a type Representing a type All metadata signatures are based around the ELEMENT_TYPE structure. This assigns a number to each 'built-in' type in the framework; for example, Uint16 is 0x07, String is 0x0e, and Object is 0x1c. Byte codes are also used to indicate SzArrays, multi-dimensional arrays, custom types, and generic type and method variables. However, these require some further information. Firstly, custom types (ie not one of the built-in types). These require you to specify the 4-byte TypeDefOrRef coded token after the CLASS (0x12) or VALUETYPE (0x11) element type. This 4-byte value is stored in a compressed format before being written out to disk (for more excruciating details, you can refer to the CLI specification). SzArrays simply have the array item type after the SZARRAY byte (0x1d). Multidimensional arrays follow the ARRAY element type with a series of compressed integers indicating the number of dimensions, and the size and lower bound of each dimension. Generic variables are simply followed by the index of the generic variable they refer to. There are other additions as well, for example, a specific byte value indicates a method parameter passed by reference (BYREF), and other values indicating custom modifiers. Some examples... To demonstrate, here's a few examples and what the resulting blobs in the #Blob heap will look like. Each name in capitals corresponds to a particular byte value in the ELEMENT_TYPE or CALLCONV structure, and coded tokens to custom types are represented by the type name in curly brackets. A simple field: int intField; FIELD I4 A field of an array of a generic type parameter (assuming T is the first generic parameter of the containing type): T[] genArrayField FIELD SZARRAY VAR 0 An instance method signature (note how the number of parameters does not include the return type): instance string MyMethod(MyType, int&, bool[][]); HASTHIS DEFAULT 3 STRING CLASS {MyType} BYREF I4 SZARRAY SZARRAY BOOLEAN A generic type instantiation: MyGenericType<MyType, MyStruct> GENERICINST CLASS {MyGenericType} 2 CLASS {MyType} VALUETYPE {MyStruct} For more complicated examples, in the following C# type declaration: GenericType<T> : GenericBaseType<object[], T, GenericType<T>> { ... } the Extends field of the TypeDef for GenericType will point to a TypeSpec with the following blob: GENERICINST CLASS {GenericBaseType} 3 SZARRAY OBJECT VAR 0 GENERICINST CLASS {GenericType} 1 VAR 0 And a static generic method signature (generic parameters on types are referenced using VAR, generic parameters on methods using MVAR): TResult[] GenericMethod<TInput, TResult>( TInput, System.Converter<TInput, TOutput>); GENERIC 2 2 SZARRAY MVAR 1 MVAR 0 GENERICINST CLASS {System.Converter} 2 MVAR 0 MVAR 1 As you can see, complicated signatures are recursively built up out of quite simple building blocks to represent all the possible variations in a .NET assembly. Now we've looked at the basics of normal method signatures, in my next post I'll look at custom attribute application signatures, and how they are different to normal signatures.

  Read the article

• MVC Portable Areas &ndash; Static Files as Embedded Resources

  - by Steve Michelotti

  This is the third post in a series related to build and deployment considerations as I’ve been exploring MVC Portable Areas: #1 – Using Web Application Project to build portable areas #2 – Conventions for deploying portable area static files #3 – Portable area static files as embedded resources In the last post, I walked through a convention for managing static files.  In this post I’ll discuss another approach to manage static files (e.g., images, css, js, etc.).  With this approach, you *also* compile the static files as embedded resources into the assembly similar to the *.aspx pages. Once again, you can set this to happen automatically by simply modifying your *.csproj file to include the desired extensions so you don’t have to remember every time you add a file: 1: <Target Name="BeforeBuild"> 2: <ItemGroup> 3: <EmbeddedResource Include="**\*.aspx;**\*.ascx;**\*.gif;**\*.css;**\*.js" /> 4: </ItemGroup> 5: </Target> We now need a reliable way to serve up these static files that are embedded in the assembly. There are a couple of ways to do this but one way is to simply create a Resource controller whose job is dedicated to doing this. 1: public class ResourceController : Controller 2: { 3: public ActionResult Index(string resourceName) 4: { 5: var contentType = GetContentType(resourceName); 6: var resourceStream = Assembly.GetExecutingAssembly().GetManifestResourceStream(resourceName); 7:   8: return this.File(resourceStream, contentType); 9: return View(); 10: } 11:   12: private static string GetContentType(string resourceName) 13: { 14: var extention = resourceName.Substring(resourceName.LastIndexOf('.')).ToLower(); 15: switch (extention) 16: { 17: case ".gif": 18: return "image/gif"; 19: case ".js": 20: return "text/javascript"; 21: case ".css": 22: return "text/css"; 23: default: 24: return "text/html"; 25: } 26: } 27: } In order to use this controller, we need to make sure we’ve registered the route in our portable area registration (shown in lines 5-6): 1: public class WidgetAreaRegistration : PortableAreaRegistration 2: { 3: public override void RegisterArea(System.Web.Mvc.AreaRegistrationContext context, IApplicationBus bus) 4: { 5: context.MapRoute("ResourceRoute", "widget1/resource/{resourceName}", 6: new { controller = "Resource", action = "Index" }); 7:   8: context.MapRoute("Widget1", "widget1/{controller}/{action}", new 9: { 10: controller = "Home", 11: action = "Index" 12: }); 13:   14: RegisterTheViewsInTheEmbeddedViewEngine(GetType()); 15: } 16:   17: public override string AreaName 18: { 19: get { return "Widget1"; } 20: } 21: } In my previous post, we relied on a custom Url helper method to find the actual physical path to the static file like this: 1: <img src="<%: Url.AreaContent("/images/arrow.gif") %>" /> Hello World! However, since we are now embedding the files inside the assembly, we no longer have to worry about the physical path. We can change this line of code to this: 1: <img src="<%: Url.Resource("Widget1.images.arrow.gif") %>" /> Hello World! Note that I had to fully quality the resource name (with namespace and physical location) since that is how .NET assemblies store embedded resources. I also created my own Url helper method called Resource which looks like this: 1: public static string Resource(this UrlHelper urlHelper, string resourceName) 2: { 3: var areaName = (string)urlHelper.RequestContext.RouteData.DataTokens["area"]; 4: return urlHelper.Action("Index", "Resource", new { resourceName = resourceName, area = areaName }); 5: } This method gives us the convenience of not having to know how to construct the URL – but just allowing us to refer to the resource name. The resulting html for the image tag is: 1: <img src="/widget1/resource/Widget1.images.arrow.gif" /> so we can always request any image from the browser directly. This is almost analogous to the WebResource.axd file but for MVC. What is interesting though is that we can encapsulate each one of these so that each area can have it’s own set of resources and they are easily distinguished because the area name is the first segment of the route. This makes me wonder if something like this ResourceController should be baked into portable areas itself. I’m definitely interested in anyone has any opinions on it or have taken alternative approaches.

  Read the article

• Lessons Building KeyRef (a .NET developer learning Rails)

  - by Liam McLennan

  Just because I like to build things, and I like to learn, I have been working on a keyboard shortcut reference site. I am using this as an opportunity to improve my ruby and rails skills. The first few days were frustrating. Perhaps the learning curve of all the fun new toys was a bit excessive. Finally tonight things have really started to come together. I still don’t understand the rails built-in testing support but I will get there. Interesting Things I Learned Tonight RubyMine IDE Tonight I switched to RubyMine instead of my usual Notepad++. I suspect RubyMine is a powerful tool if you know how to use it – but I don’t. At the moment it gives me errors about some gems not being activated. This is another one of those things that I will get to. I have also noticed that the editor functions significantly differently to the editors I am used to. For example, in visual studio and notepad++ if you place the cursor at the start of a line and press left arrow the cursor is sent to the end of the previous line. In RubyMine nothing happens. Haml Haml is my favourite view engine. For my .NET work I have been using its non-union Mexican CLR equivalent – nHaml. Multiple CSS Classes To define a div with more than one css class haml lets you chain them together with a ‘.’, such as: .span-6.search_result contents of the div go here Indent Consistency I also learnt tonight that both haml and nhaml complain if you are not consistent about indenting. As a consequence of the move from notepad++ to RubyMine my haml views ended up with some tab indenting and some space indenting. For the view to render all of the indents within a view must be consistent. Sorting Arrays I guessed that ruby would be able to sort an array alphabetically by a property of the elements so my first attempt was: Application.all.sort {|app| app.name} which does not work. You have to supply a comparer (much like .NET). The correct sort is: Application.all.sort {|a,b| a.name.downcase <=> b.name.downcase} MongoMapper Find by Id Since document databases are just fancy key-value stores it is essential to be able to easily search for a document by its id. This functionality is so intrinsic that it seems that the MongoMapper author did not bother to document it. To search by id simply pass the id to the find method: Application.find(‘4c19e8facfbfb01794000002’) Rails And CoffeeScript I am a big fan of CoffeeScript so integrating it into this application is high on my priorities. My first thought was to copy Dr Nic’s strategy. Unfortunately, I did not get past step 1. Install Node.js. I am doing my development on Windows and node is unix only. I looked around for a solution but eventually had to concede defeat… for now. Quicksearch The front page of the application I am building displays a list of applications. When the user types in the search box I want to reduce the list of applications to match their search. A quick googlebing turned up quicksearch, a jquery plugin. You simply tell quicksearch where to get its input (the search textbox) and the list of items to filter (the divs containing the names of applications) and it just works. Here is the code: $('#app_search').quicksearch('.search_result'); Summary I have had a productive evening. The app now displays a list of applications, allows them to be sorted and links through to an application page when an application is selected. Next on the list is to display the set of keyboard shortcuts for an application.

  Read the article

• How to Build Services from Legacy Applications

  - by Chris Falter

  The SOA consultants invaded the executive suite at your company or agency, preached the true religion, and converted the unbelievers. Now by divine imperative you must convert your legacy applications into a suite of reusable services.  But as usual, you lack the time and resources that you need in order to develop the services properly.  So you googled or bing’ed, found this blog post, and began crying in gratitude.  Yes, as the title implies, I am going to reveal my easy, 3-step, works-every-time process for converting silos of legacy applications into the inventory of services your CIO has been dreaming about.  So just close your eyes and count to 3 … now open them … and here it is…. Not. While wishful thinking is too often the coin of the IT realm, even the most naive practitioner knows that converting legacy applications into reusable services requires more than a magic wand.  The reason is simple: if your starting point is your legacy applications, then you will simply be bolting a web service technology layer on top of your legacy API.  And that legacy API is built in the image of the silo applications.  Enter the wide gate of the legacy API, follow the broad path of generating service interfaces from existing code, and you will arrive at the siloed enterprise destruction that you thought you were escaping. The Straight and Narrow Path This past week I had the opportunity to learn how the FBI Criminal Justice Information Systems department has been transitioning from silo applications to a service inventory.  Lafe Hutcheson, IT Specialist in the architecture group and fellow attendee at an SOA Architect Certification Workshop, was my guide.  Lafe has survived the chaos of an SOA initiative, so it is not surprising that he was able to return from a US Army deployment to Kabul, Afghanistan with nary a scratch.  According to Lafe, building their service inventory is a three-phase process: Model a business process.  This requires intense collaboration between the IT and business wings of the organization, of course.  The FBI uses IBM Websphere tools to model the process with BPMN. Identify candidate services to facilitate the business process. Convert the BPMN to an executable BPEL orchestration, model and develop the services, and use a BPEL engine to run the process.  The FBI uses ActiveVOS for orchestration services. The 12 Step Program to End Your Legacy API Addiction Thomas Erl has documented a process for building a web service inventory that is quite similar to the FBI process. Erl’s process adds a technology architecture definition phase, which allows for the technology environment to influence the inventory blueprint.  For example, if you are using an enterprise service bus, you will probably not need to build your own utility services for logging or intermediate routing.  Erl also lists a service-oriented analysis phase that highlights the 12-step process of applying the principles of service orientation to modeling your services.  Erl depicts the modeling of a service inventory as an iterative process: model a business process, define the relevant technology architecture, define the service inventory blueprint, analyze the services, then model another business process, rinse and repeat.  (Astute readers will note that Erl’s diagram, restricted to analysis and modeling process, does not include the implementation phase that concludes the FBI service development methodology.) The service-oriented analysis phase is where you find the 12 steps that will free you from your legacy API addiction. In a nutshell, you identify the steps in the process that need services; identify the different types of services (agnostic entity services, service compositions, and utility services) that are required; apply service-orientation principles; and normalize the inventory into cohesive service models. Rather than discuss each of the 12 steps individually, I will close by simply referring my readers to Erl’s explanation.

  Read the article

• Why you shouldn't add methods to interfaces in APIs

  - by Simon Cooper

  It is an oft-repeated maxim that you shouldn't add methods to a publically-released interface in an API. Recently, I was hit hard when this wasn't followed. As part of the work on ApplicationMetrics, I've been implementing auto-reporting of MVC action methods; whenever an action was called on a controller, ApplicationMetrics would automatically report it without the developer needing to add manual ReportEvent calls. Fortunately, MVC provides easy hook when a controller is created, letting me log when it happens - the IControllerFactory interface. Now, the dll we provide to instrument an MVC webapp has to be compiled against .NET 3.5 and MVC 1, as the lowest common denominator. This MVC 1 dll will still work when used in an MVC 2, 3 or 4 webapp because all MVC 2+ webapps have a binding redirect redirecting all references to previous versions of System.Web.Mvc to the correct version, and type forwards taking care of any moved types in the new assemblies. Or at least, it should. IControllerFactory In MVC 1 and 2, IControllerFactory was defined as follows: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } So, to implement the logging controller factory, we simply wrap the existing controller factory: internal sealed class LoggingControllerFactory : IControllerFactory { private readonly IControllerFactory m_CurrentController; public LoggingControllerFactory(IControllerFactory currentController) { m_CurrentController = currentController; } public IController CreateController( RequestContext requestContext, string controllerName) { // log the controller being used FeatureSessionData.ReportEvent("Controller used:", controllerName); return m_CurrentController.CreateController(requestContext, controllerName); } public void ReleaseController(IController controller) { m_CurrentController.ReleaseController(controller); } } Easy. This works as expected in MVC 1 and 2. However, in MVC 3 this type was throwing a TypeLoadException, saying a method wasn't implemented. It turns out that, in MVC 3, the definition of IControllerFactory was changed to this: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); SessionStateBehavior GetControllerSessionBehavior( RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } There's a new method in the interface. So when our MVC 1 dll was redirected to reference System.Web.Mvc v3, LoggingControllerFactory tried to implement version 3 of IControllerFactory, was missing the GetControllerSessionBehaviour method, and so couldn't be loaded by the CLR. Implementing the new method Fortunately, there was a workaround. Because interface methods are normally implemented implicitly in the CLR, if we simply declare a virtual method matching the signature of the new method in MVC 3, then it will be ignored in MVC 1 and 2 and implement the extra method in MVC 3: internal sealed class LoggingControllerFactory : IControllerFactory { ... public virtual SessionStateBehaviour GetControllerSessionBehaviour( RequestContext requestContext, string controllerName) {} ... } However, this also has problems - the SessionStateBehaviour type only exists in .NET 4, and we're limited to .NET 3.5 by support for MVC 1 and 2. This means that the only solutions to support all MVC versions are: Construct the LoggingControllerFactory type at runtime using reflection Produce entirely separate dlls for MVC 1&2 and MVC 3. Ugh. And all because of that blasted extra method! Another solution? Fortunately, in this case, there is a third option - System.Web.Mvc also provides a DefaultControllerFactory type that can provide the implementation of GetControllerSessionBehaviour for us in MVC 3, while still allowing us to override CreateController and ReleaseController. However, this does mean that LoggingControllerFactory won't be able to wrap any calls to GetControllerSessionBehaviour. This is an acceptable bug, given the other options, as very few developers will be overriding GetControllerSessionBehaviour in their own custom controller factory. So, if you're providing an interface as part of an API, then please please please don't add methods to it. Especially if you don't provide a 'default' implementing type. Any code compiled against the previous version that can't be updated will have some very tough decisions to make to support both versions.

  Read the article

• How To Customize Wallpaper in Windows 7 Starter Edition

  - by Asian Angel

  If you have the Starter Edition of Windows 7 installed on your netbook you may be sick of looking at the default wallpaper. With Starter Background Changer you can access other customization options with ease. Before There is not a lot that you can say about the singular default wallpaper included with the Starter Edition…it just kind of sits there all boring like. Installing Starter Background Changer Since the installer part of the program is in French we have the entire set of install windows shown here with the appropriate buttons highlighted to get you through the whole process without any problems. Using Starter Background Changer Once the installation process has finished you will simply see a quiet screen with no desktop icons or Start Menu entries visible. Now if you are wondering at this point “Did the program finish installing or did it install at all?” the answer is yes. Right click on your desktop and you will notice a new entry on the Context Menu…the same one that is included in the other editions but not Starter. Time to have some fun… The Personalization Window will open maximized but we have reduced it here for our screenshots. You have four regular categories to choose from in the lower part of the window: Wallpaper, Colors, Sounds, & Screensavers. The first category that we chose for our example was Wallpaper. As you can see here the main display area (My Collection) has no wallpapers showing at the moment. You can use the drop-down menu to access your My Pictures Folder or browse for a different location. Notice that you can choose how the image fills the screen and set up a timed wallpaper slideshow at the bottom. Any picture (or pictures) selected will be added to the My Collection display for easy access the next time you open the window. Once you choose a picture click on Validate the modification to set the wallpaper for your desktop and return to the main window. When you return to the main window you will see a preview for your selection. At this point you can simply close the window or make further adjustments in the other categories. Starter Background Changer provides easy one-stop access to other customization areas. We started off with Colors… Followed by Sounds… And finally Screensavers. Before you do close the main window you can take a quick look at the Options if desired. We did set Optimization of the images to High on our system. Quick and easy wallpaper satisfaction. We did pin the Program Window to our Taskbar…nice if you prefer this method as opposed to the Desktop Context Menu. Conclusion If you have been longing for a way to change the wallpaper in Windows 7 Starter Edition then you will definitely want to give this program a try. Goodbye boring default wallpaper! For more wonderful ways to customize your Windows 7 Started Edition be sure to read our article here. Links Download Starter Background Changer Similar Articles Productive Geek Tips Awesome Desktop Wallpapers: The Windows 7 EditionWindows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Starscape Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• Windows Azure Emulators On Your Desktop

  - by BuckWoody

  Many people feel they have to set up a full Azure subscription online to try out and develop on Windows Azure. But you don’t have to do that right away. In fact, you can download the Windows Azure Compute Emulator – a “cloud development environment” – right on your desktop. No, it’s not for production use, and no, you won’t have other people using your system as a cloud provider, and yes, there are some differences with Production Windows Azure, but you’ll be able code, run, test, diagnose, watch, change and configure code without having any connection to the Internet at all. The best thing about this approach is that when you are ready to deploy the code you’ve been testing, a few clicks deploys it to your subscription when you make one.   So what deep-magic does it take to run such a thing right on your laptop or even a Virtual PC? Well, it’s actually not all that difficult. You simply download and install the Windows Azure SDK (you can even get a free version of Visual Studio for it to run on – you’re welcome) from here: http://msdn.microsoft.com/en-us/windowsazure/cc974146.aspx   This SDK will also install the Windows Azure Compute Emulator and the Windows Azure Storage Emulator – and then you’re all set. Right-click the icon for Visual Studio and select “Run as Administrator”:    Now open a new “Cloud” type of project:   Add your Web and Worker Roles that you want to code:   And when you’re done with your design, press F5 to start the desktop version of Azure:   Want to learn more about what’s happening underneath? Right-click the tray icon with the Azure logo, and select the two emulators to see what they are doing:          In the configuration files, you’ll see a “Use Development Storage” setting. You can call the BLOB, Table or Queue storage and it will all run on your desktop. When you’re ready to deploy everything to Windows Azure, you simply change the configuration settings and add the storage keys and so on that you need.   Want to learn more about all this?   Overview of the Windows Azure Compute Emulator: http://msdn.microsoft.com/en-us/library/gg432968.aspx Overview of the Windows Azure Storage Emulator: http://msdn.microsoft.com/en-us/library/gg432983.aspx January 2011 Training Kit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=413E88F8-5966-4A83-B309-53B7B77EDF78&displaylang=en      

  Read the article

• AccelerometerInput XNA GameComponent

  - by Michael B. McLaughlin

  Bad accelerometer controls kill otherwise good games. I decided to try to do something about it. So I create an XNA GameComponent called AccelerometerInput. It’s still a beta project but you are welcome to try it, use it, modify it, etc. I’m releasing under the terms of the Microsoft Public License. Important info: First, it only supports tilt-style controls currently. I have not implemented motion-style controls yet (and make no promises as to when I might find time to do so). Second, I commented it heavily so that you can (hopefully) understand what it is doing. Please read the comments and examine the sample game for a usage overview. There are configurable parameters which I encourage you to make use of (both by modifying the default values where your testing shows it to be appropriate and also by implementing a calibration mechanism in your game that lets the user adjust those configurable values based on his or her own circumstances). Third, even with this code, accelerometer controls are still a fairly advanced topic area; you will likely find nothing but disappointment if you simply plunk this into some project without testing it on a device (or preferably on several devices). Fourth, if you do try this code and find that something doesn’t work as expected on your phone, please let me know as I want to improve it and can only do so with your help. Let me know what phone model it is, what you tried doing, what you expected, and what result you had instead. I may or may not be able to incorporate it into the code, but I can let others know at the very least so that they can make appropriate modifications to their games (I’m hopeful that all phones are reasonably similar in their workings and require, at most, a slight calibration change, but I simply don’t know). Fifth, although I’ll do my best to answer any questions you may have about it, I’m very busy with a number of things currently so it might take a little while. Please look through the code and examine the comments and sample game first before asking any questions. It’s likely that the answer is in there. If not, or if you just aren’t really sure, ask away. Sixth, there are differences between a portrait-mode game and a landscape mode game (specifically in the appropriate default tilt adjustment for toward the user/away from the user calculations). This is documented and the default is set for landscape. If you use this for a portrait game, make the appropriate change (look for the TODO: comment in AccelerometerInput.cs). Seventh, no provision whatsoever is made for disabling screen locking. It is up to you to implement that and to take appropriate measures to detect when the user has been idle for too long and timeout the game. That code is very game-specific. If you have questions about such matters, consult the relevant MSDN documentation and, if you still have questions, visit the App Hub forums and ask there. I answer questions there a lot and so I may even stumble across your question and answer it. But that’s a much better forum than the comments section here for questions of that sort so I would appreciate it if you asked idle detection-related questions there (or on some other suitable site that you may be more familiar and comfortable with). Eighth, this is an XNA GameComponent intended for XNA-based games on WP7. A sufficiently knowledgeable Silverlight developer should have no problem adapting it for use in a Silverlight game or app. I may create a Silverlight version at some point myself. Right now I do not have the time, unfortunately. Ok. Without further ado: http://www.bobtacoindustries.com/developers/utils/AccelerometerInput.zip Have a great St. Patrick’s Day!

  Read the article

• JFall 2012

  - by Geertjan

  JFall 2012 was over far too soon! Seven tracks going on simultaneously in a great location, with many artifacts reminding me of JavaOne, and nice snacks and drinks afterwards. The day started, as such things always do, with a keynote. Thanks to @royvanrijn for the photo below, I didn't take any myself and without a picture this report might have been too dry: What you see above is Steve Chin riding into the keynote hall on his NightHacking bike. The keynote was interesting, I can't be too complimentary about it, since I was part of it myself. Bert Ertman introduced the day and then Steve Chin took over, together with Sharat Chander, Tom Eugelink, Timon Veenstra, and myself. We had a strict choreography for the keynote, one that would ensure a lot of variation and some unexpected surprises, such as Steve being thrown off the stage a few times by Bert because of mentioning JavaOne too many times, rather than the clearly much cooler JFall. Steve talked about JavaOne and the direction Java is headed in, Sharat talked about JavaME and embedded devices, Steve and Tom did a demo involving JavaFX, I did a Project Easel demo, and Timon from Ordina talked about his Duke's Choice Award winning AgroSense project. I think the Project Easel demo (which I repeated later in a screencast for Parleys arranged by Eugene Boogaart) came across well and several people I spoke to especially like the roundtrip/bi-directional work that can be done, from browser to IDE and back again, very simply and intuitively. (In a long conversation on the drive back home afterwards, the scenario of a designer laying out the UI in HTML and then handing the HTML to a developer for back-end work, a developer who would then find it convenient to open the HTML in a browser and quickly navigate from the browser to the resources within the IDE, was discussed and considered to be extremely interesting and worth considering adopting NetBeans for, for no other reason than that.) Later I attended a session by David Delabassee on Java EE 7, Hans Dockter on Gradle, and Sander Mak on cross-build injection attacks. I was sorry to have missed Martijn Verburg's session, which sounded like it was really fantastic, among others, such as Gerrit Grunwald. I did a session too, entitled "Unlocking the Java EE 6 Platform", which was very well attended, pretty much a full room, and the demo went very smoothly. I talked to many people, e.g., a long time with Hans Dockter about how cool Gradle is and how great the Gradle/NetBeans plugin is turning out to be. I also had a long conversation (and did a demo) with Chris Chedgey, from Structure101, after his session, which was incredibly well attended; very interesting how popular modularity is. I met several people for the first time, as well as some colleagues from past places I've worked at. All in all, it was a great conference, unfortunately too short, which was very well attended (clearly over 1000) people, with several international speakers, as well as international attendees such as Mattias Karlsson, Sweden JUG leader. And, unsurprisingly, I came across NetBeans Platform applications again, none of which I had ever heard of before. In each case, "our fat client application" was mentioned in passing, never as a main application, and never in a context where there are plans for the application to be migrated to the web or mobile, simply because doing so makes no business sense at all. Great times at JFall, looking forward to meeting with some of the people I met again soon.

  Read the article

• Package Version Numbers, why are they so important

  - by Chris W Beal

  One of the design goals of IPS has been to allow people to easily move forward to a supported "Surface" of component. That is to say, when you  # pkg update your system, you get the latest set of components which all work together, based on the packages you already have installed. During development, this has meant simply you update to the latest "build" of the components. (During development, we build everything and publish everything every two weeks). Now we've released Solaris 11 using the IPS technologies, things are a bit more complicated. We need to be able to reflect all the types of Solaris release we are doing. For example Solaris Development builds, Solaris Update builds and "Support Repository Updates" (the replacement for patches) in the version scheme. So simply saying "151" as the build number isn't sufficient to articulate what you are running, or indeed what is available to update to In my previous blog post I talked about creating your own package, and gave an example FMRI of pkg://tools/[email protected],0.5.11-0.0.0 But it's probably more instructive to look at the FMRI of a Solaris package. The package "core-os" contains all the common utilities and daemons you need to use Solaris.  $ pkg info core-os Name: system/core-os Summary: Core Solaris Description: Operating system core utilities, daemons, and configuration files. Category: System/Core State: Installed Publisher: solaris Version: 0.5.11 Build Release: 5.11 Branch: 0.175.0.0.0.2.1 Packaging Date: Wed Oct 19 07:04:57 2011 Size: 25.14 MB FMRI: pkg://solaris/system/[email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z The FMRI is what we will concentrate on here. In this package "solaris" is the publisher. You can use the pkg publisher command to see where the solaris publisher gets it's bits from $ pkg publisher PUBLISHER TYPE STATUS URI solaris origin online http://pkg.oracle.com/solaris/release/ So we can see we get solaris packages from pkg.oracle.com.  The package name is system/core-os. These can be arbitrary length, just to allow you to group similar packages together. Now on the the interesting? bit, the versions, everything after the @ is part of the version. IPS will only upgrade to a "higher" version. [email protected],5.11-0.175.0.0.0.2.1:20111019T070457Z core-os = Package Name0.5.11 = Component - in this case we're saying it's a SunOS 5.11 package, = separator5.11 = Built on version - to indicate what OS version you built the package on- = another separator0.175.0.0.0.2.1 = Branch Version : = yet another separator20111019T070457Z = Time stamp when the package was published So from that we can see the Branch Version seems rather complex. It is necessarily so, to allow us to describe the hierachy of releases we do In this example we see the following 0.175: is known as the trunkid, and is incremented each build of a new release of Solaris. During Solaris 11 this should not change  0: is the Update release for Solaris. 0 for FCS, 1 for update 1 etc 0: is the SRU for Solaris. 0 for FCS, 1 for SRU 1 etc 0: is reserved for future use 2: Build number of the SRU 1: Nightly ID - only important for Solaris developersTake a hypothetical example [email protected],5.11-0.175.1.5.0.4.1:<something> This would be build 4 of SRU 5 of Update 1 of Solaris 11 This is actually documented in a MOS article 1378134.1 Which you can read if you have a support contract.

  Read the article

• DATEFROMPARTS

  - by jamiet

  I recently overheard a remark by Greg Low in which he said something akin to "the most interesting parts of a new SQL Server release are the myriad of small things that are in there that make a developer's life easier" (I'm paraphrasing because I can't remember the actual quote but it was something like that). The new DATEFROMPARTS function is a classic example of that . It simply takes three integer parameters and builds a date out of them (if you have used DateSerial in Reporting Services then you'll understand). Take the following code which generates the first and last day of some given years: SELECT 2008 AS Yr INTO #Years UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))),      [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM   #Years y here are the results: That code is pretty gnarly though with those CONVERTs in there and, worse, if the character string is constructed in a certain way then it could fail due to localisation, check this out: SET LANGUAGE french;SELECT dt,Month_Name=DATENAME(mm,dt)FROM   (       SELECT  dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02')       FROM    #Years y       )d;SET LANGUAGE us_english;SELECT dt,Month_Name=DATENAME(mm,dt)FROM   (       SELECT  dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02')       FROM    #Years y       )d; Notice how the datetime has been converted differently based on the language setting. When French, the string "2012-01-02" gets interpreted as 1st February whereas when us_english the same string is interpreted as 2nd January. Instead of all this CONVERTing nastiness we have DATEFROMPARTS: SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1),    [LasttDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM   #Years y How much nicer is that? The bad news of course is that you have to upgrade to SQL Server 2012 or migrate to SQL Azure if you want to use it, as is the way of the world! Don't forget that if you want to try this code out on SQL Azure right this second, for free, you can do so by connecting up to AdventureWorks On Azure. You don't even need to have SSMS handy - a browser that runs Silverlight will do just fine. Simply head to https://mhknbn2kdz.database.windows.net/ and use the following credentials: Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly One caveat, SELECT INTO doesn't work on SQL Azure so you'll have to use this instead: DECLARE @y TABLE ( [Yr] INT);INSERT @y([Yr])SELECT 2008 AS Yr UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012;SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1),      [LastDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM @y y;SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))),      [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM @y y; @Jamiet

  Read the article

• Why do I need two Instances in Windows Azure?

  - by BuckWoody

  Windows Azure as a Platform as a Service (PaaS) means that there are various components you can use in it to solve a problem: Compute “Roles” - Computers running an OS and optionally IIS - you can have more than one "Instance" of a given Role Storage - Blobs, Tables and Queues for Storage Other Services - Things like the Service Bus, Azure Connection Services, SQL Azure and Caching It’s important to understand that some of these services are Stateless and others maintain State. Stateless means (at least in this case) that a system might disappear from one physical location and appear elsewhere. You can think of this as a cashier at the front of a store. If you’re in line, a cashier might take his break, and another person might replace him. As long as the order proceeds, you as the customer aren’t really affected except for the few seconds it takes to change them out. The cashier function in this example is stateless. The Compute Role Instances in Windows Azure are Stateless. To upgrade hardware, because of a fault or many other reasons, a Compute Role's Instance might stop on one physical server, and another will pick it up. This is done through the controlling fabric that Windows Azure uses to manage the systems. It’s important to note that storage in Azure does maintain State. Your data will not simply disappear - it is maintained - in fact, it’s maintained three times in a single datacenter and all those copies are replicated to another for safety. Going back to our example, storage is similar to the cash register itself. Even though a cashier leaves, the record of your payment is maintained. So if a Compute Role Instance can disappear and re-appear, the things running on that first Instance would stop working. If you wrote your code in a Stateless way, then another Role Instance simply re-starts that transaction and keeps working, just like the other cashier in the example. But if you only have one Instance of a Role, then when the Role Instance is re-started, or when you need to upgrade your own code, you can face downtime, since there’s only one. That means you should deploy at least two of each Role Instance not only for scale to handle load, but so that the first “cashier” has someone to replace them when they disappear. It’s not just a good idea - to gain the Service Level Agreement (SLA) for our uptime in Azure it’s a requirement. We point this out right in the Management Portal when you deploy the application: (Click to enlarge) When you deploy a Role Instance you can also set the “Upgrade Domain”. Placing Roles on separate Upgrade Domains means that you have a continuous service whenever you upgrade (more on upgrades in another post) - the process looks like this for two Roles. This example covers the scenario for upgrade, so you have four roles total - One Web and one Worker running the "older" code, and one of each running the new code. In all those Roles you want at least two instances, and this example shows that you're covered for High Availability and upgrade paths: The take-away is this - always plan for forward-facing Roles to have at least two copies. For Worker Roles that do background processing, there are ways to architect around this number, but it does affect the SLA if you have only one.

  Read the article

• Heterogeneous Datacenter Management with Enterprise Manager 12c

  - by Joe Diemer

  The following is a Guest Blog, contributed by Bryce Kaiser, Product Manager at Blue MedoraWhen I envision a perfect datacenter, it would consist of technologies acquired from a single vendor across the entire server, middleware, application, network, and storage stack - Apps to Disk - that meets your organization’s every IT requirement with absolute best-of-breed solutions in every category.   To quote a familiar motto, your datacenter would consist of "Hardware and Software, Engineered to Work Together".  In almost all cases, practical realities dictate something far less than the IT Utopia mentioned above.   You may wish to leverage multiple vendors to keep licensing costs down, a single vendor may not have an offering in the IT category you need, or your preferred vendor may quite simply not have the solution that meets your needs.    In other words, your IT needs dictate a heterogeneous IT environment.  Heterogeneity, however, comes with additional complexity. The following are two pretty typical challenges:1) No End-to-End Visibility into the Enterprise Wide Application Deployment. Each vendor solution which is added to an infrastructure may bring its own tooling creating different consoles for different vendor applications and platforms.2) No Visibility into Performance Bottlenecks. When multiple management tools operate independently, you lose diagnostic capabilities including identifying cross-tier issues with database, hung-requests, slowness, memory leaks and hardware errors/failures causing DB/MW issues. As adoption of Oracle Enterprise Manager (EM) has increased, especially since the release of Enterprise Manager 12c, Oracle has seen an increase in the number of customers who want to leverage their investments in EM to manage non-Oracle workloads.  Enterprise Manager provides a single pane of glass view into their entire datacenter.  By creating a highly extensible framework via the Oracle EM Extensibility Development Kit (EDK), Oracle has provided the tooling for business partners such as my company Blue Medora as well as customers to easily fill gaps in the ecosystem and enhance existing solutions.  As mentioned in the previous post on the Enterprise Manager Extensibility Exchange, customers have access to an assortment of Oracle and Partner provided solutions through this Exchange, which is accessed at http://www.oracle.com/goto/emextensibility.  Currently, there are over 80 Oracle and partner provided plug-ins across the EM 11g and EM 12c versions.  Blue Medora is one of those contributing partners, for which you will find 3 of our solutions including our flagship plugin for VMware.  Let's look at Blue Medora’s VMware plug-in as an example to what I'm trying to convey.  Here is a common situation solved by true visibility into your entire stack:Symptoms•    My database is bogging down, however the database appears okay internally.  Maybe it’s starved for resources?•    My OS tooling is showing everything is “OK”.  Something doesn’t add up. Root cause•    Through the VMware plugin we can see the problem is actually on the virtualization layer Solution•    From within Enterprise Manager  -- the same tool you use for all of your database tuning -- we can overlay the data of the database target, host target, and virtual machine target for a true picture of the true root cause. Here is the console view: Perhaps your monitoring conditions are more specific to your environment.  No worries, Enterprise Manager still has you covered.  With Metric Extensions you have the “Next Generation” of User-Defined Metrics, which easily bring the power of your existing management scripts into a single console while leveraging the proven Enterprise Manager framework. Simply put, Oracle Enterprise manager boasts a growing ecosystem that provides the single pane of glass for your entire datacenter from the database and beyond.  Bryce can be contacted at [email protected]

  Read the article

• The gestures of Windows 8 (Consumer preview): part 2, More about Search

  - by Laurent Bugnion

  This is part 2 of a multipart blog post about the gestures and shortcuts in Windows 8 consumer preview. Part 1 can be found here! More about the Search charm In the first installment of this series, we talked about the charms and mentioned a few gestures to display the Search charm. Search is a very central and powerful feature in Windows 8, and allows you to search in Apps, Settings, Files and within Metro applications that support the Search contract. There are a few cool features around the Search, and especially the applications associated to it. I already mentioned the keyboard shortcuts you can use: Win-C shows the Charms bar (same as swiping from the right bevel towards the center of the screen). Win-Q open the Search fly out with Apps preselected. Win-W open the Search fly out with Settings preselected. Win-F open the Search fly out with Files preselected. Searching in Metro apps In addition to these three search domains, you can also search a Metro app, as long as it supports the Search contract (check this Build video to learn more about the Search contract). These apps show up in the Search flyout as shown here: Notice the list of apps below the Files button? That’s what we are talking about. First of all, the list order changes when you search in some applications. For instance, in the image above, I had used the Store with the Search charm. This is why the store shows up as the first app. I am not 100% what algorithm is used here (sorting according to number of searches is my guess), but try it out and try to figure it out Applications that have never been searched are sorted alphabetically. Does it mean we will see cool app names like ___AAA_MyCoolApp? I certainly hope not!! Pinning You can also pin often used apps to the Search flyout. To pin an app with the mouse, right click on it in the Search flyout and select Pin from the context menu. With the keyboard, use the arrow keys to go down to the selected app, and then open the context menu. With the finger, simply tap and hold until you see a semi transparent rectangle indicating that the context menu will be shown, then release. The context menu opens up and you can select Pin. Pin context menu Pinned apps Unpinning, Hiding Using the same technique as for pinning here above, you can also unpin a pinned application. Finally, you can also choose to hide an app from the Search flyout altogether. This is a convenient way to clean up and make it easy to find stuff. Note: At this point, I am not sure how to re-add a hidden app to the Search flyout. If anyone knows, please mention it in the comments, thanks! Reordering You can also reorder pinned apps. To do this, with the finger, tap, hold and pull the app to the side, then pull it vertically to reorder it. You can also reorder with the mouse, simply by clicking on an app and pulling it vertically to the place you want to put it. I don’t think there is a way to do that with the keyboard though. That’s it for now More gestures will follow in a next installment! Have fun with Windows 8   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Controlling soft errors and false alarms in SSIS

  - by Jim Giercyk

  If you are like me, you dread the 3AM wake-up call.  I would say that the majority of the pages I get are false alarms.  The alerts that require action often require me to open an SSIS package, see where the trouble is and try to identify the offending data.  That can be very time-consuming and can take quite a chunk out of my beauty sleep.  For those reasons, I have developed a simple error handling scenario for SSIS which allows me to rest a little easier.  Let me first say, this is a high level discussion; getting into the nuts and bolts of creating each shape is outside the scope of this document, but if you have an average understanding of SSIS, you should have no problem following along. In the Data Flow above you can see that there is a caution triangle.  For the purpose of this discussion I am creating a truncation error to demonstrate the process, so this is to be expected.  The first thing we need to do is to redirect the error output.  Double-clicking on the Query shape presents us with the properties window for the input.  Simply set the columns that you want to redirect to Redirect Row in the dropdown box and hit Apply. Without going into a dissertation on error handling, I will just note that you can decide which errors you want to redirect on Error and on Truncation.  Therefore, to override this process for a column or condition, simply do not redirect that column or condition. The next thing we want to do is to add some information about the error; specifically, the name of the package which encountered the error and which step in the package wrote the record to the error table.  REMEMBER: If you redirect the error output, your package will not fail, so you will not know where the error record was created without some additional information.    I added 3 columns to my error record; Severity, Package Name and Step Name.  Severity is just a free-form column that you can use to note whether an error is fatal, whether the package is part of a test job and should be ignored, etc.  Package Name and Step Name are system variables. In my package I have created a truncation situation, where the firstname column is 50 characters in the input, but only 4 characters in the output.  Some records will pass without truncation, others will be sent to the error output.  However, the package will not fail. We can see that of the 14 input rows, 8 were redirected to the error table. This information can be used by another step or another scheduled process or triggered to determine whether an error should be sent.  It can also be used as a historical record of the errors that are encountered over time.  There are other system variables that might make more sense in your infrastructure, so try different things.  Date and time seem like something you would want in your output for example.  In summary, we have redirected the error output from an input, added derived columns with information about the errors, and inserted the information and the offending data into an error table.  The error table information can be used by another step or process to determine, based on the error information, what level alert must be sent.  This will eliminate false alarms, and give you a head start when a genuine error occurs.

  Read the article

• Strings in .NET are Enumerable

  - by Scott Dorman

  It seems like there is always some confusion concerning strings in .NET. This is both from developers who are new to the Framework and those that have been working with it for quite some time. Strings in the .NET Framework are represented by the System.String class, which encapsulates the data manipulation, sorting, and searching methods you most commonly perform on string data. In the .NET Framework, you can use System.String (which is the actual type name or the language alias (for C#, string). They are equivalent so use whichever naming convention you prefer but be consistent. Common usage (and my preference) is to use the language alias (string) when referring to the data type and String (the actual type name) when accessing the static members of the class. Many mainstream programming languages (like C and C++) treat strings as a null terminated array of characters. The .NET Framework, however, treats strings as an immutable sequence of Unicode characters which cannot be modified after it has been created. Because strings are immutable, all operations which modify the string contents are actually creating new string instances and returning those. They never modify the original string data. There is one important word in the preceding paragraph which many people tend to miss: sequence. In .NET, strings are treated as a sequence…in fact, they are treated as an enumerable sequence. This can be verified if you look at the class declaration for System.String, as seen below: // Summary:// Represents text as a series of Unicode characters.public sealed class String : IEnumerable, IComparable, IComparable<string>, IEquatable<string> The first interface that String implements is IEnumerable, which has the following definition: // Summary:// Exposes the enumerator, which supports a simple iteration over a non-generic// collection.public interface IEnumerable{ // Summary: // Returns an enumerator that iterates through a collection. // // Returns: // An System.Collections.IEnumerator object that can be used to iterate through // the collection. IEnumerator GetEnumerator();} As a side note, System.Array also implements IEnumerable. Why is that important to know? Simply put, it means that any operation you can perform on an array can also be performed on a string. This allows you to write code such as the following: string s = "The quick brown fox";foreach (var c in s){ System.Diagnostics.Debug.WriteLine(c);}for (int i = 0; i < s.Length; i++){ System.Diagnostics.Debug.WriteLine(s[i]);} If you executed those lines of code in a running application, you would see the following output in the Visual Studio Output window: In the case of a string, these enumerable or array operations return a char (System.Char) rather than a string. That might lead you to believe that you can get around the string immutability restriction by simply treating strings as an array and assigning a new character to a specific index location inside the string, like this: string s = "The quick brown fox";s[2] = 'a';   However, if you were to write such code, the compiler will promptly tell you that you can’t do it: This preserves the notion that strings are immutable and cannot be changed once they are created. (Incidentally, there is no built in way to replace a single character like this. It can be done but it would require converting the string to a character array, changing the appropriate indexed location, and then creating a new string.)

  Read the article

• An open plea to Microsoft to fix the serializers in WCF.

  - by Scott Wojan

  I simply DO NOT understand how Microsoft can be this far along with a tool like WCF and it STILL tout it as being an "Enterprise" tool. For example... The following is a simple xsd schema with a VERY simple data contract that any enterprise would expect an "enterprise system" to be able to handle: <?xml version="1.0" encoding="utf-8"?> <xs:schema id="Sample"     targetNamespace="http://tempuri.org/Sample.xsd"     elementFormDefault="qualified"     xmlns="http://tempuri.org/Sample.xsd"     xmlns:mstns="http://tempuri.org/Sample.xsd"     xmlns:xs="http://www.w3.org/2001/XMLSchema">    <xs:element name="SomeDataElement">     <xs:annotation>       <xs:documentation>This documents the data element. This sure would be nice for consumers to see!</xs:documentation>     </xs:annotation>     <xs:complexType>       <xs:all>         <xs:element name="Description" minOccurs="0">           <xs:simpleType>             <xs:restriction base="xs:string">               <xs:minLength value="0"/>               <xs:maxLength value="255"/>             </xs:restriction>           </xs:simpleType>         </xs:element>       </xs:all>       <xs:attribute name="IPAddress" use="required">         <xs:annotation>           <xs:documentation>Another explanation!  WOW!</xs:documentation>         </xs:annotation>         <xs:simpleType>           <xs:restriction base="xs:string">             <xs:pattern value="(([1-9]?[0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([1-9]?[0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])"/>           </xs:restriction>         </xs:simpleType>       </xs:attribute>     </xs:complexType>  </xs:element>   </xs:schema>  An minimal example xml document would be: <?xml version="1.0"encoding="utf-8" ?> <SomeDataElementxmlns="http://tempuri.org/Sample.xsd" IPAddress="1.1.168.10"> </SomeDataElement> With the max example being:  <?xml version="1.0"encoding="utf-8" ?> <SomeDataElementxmlns="http://tempuri.org/Sample.xsd" IPAddress="1.1.168.10">  <Description>ddd</Description> </SomeDataElement> This schema simply CANNOT be exposed by WCF.  Let's list why:  svcutil.exe will not generate classes for you because it can't read an xsd with xs:annotation. Even if you remove the documentation, the DataContractSerializer DOES NOT support attributes so IPAddress would become an element this not meeting the contract xsd.exe could generate classes but it is a very legacy tool, generates legacy code, and you still suffer from the following issues: NONE of the serializers support emitting of the xs:annotation documentation.  You'd think a consumer would really like to have as much documentation as possible! NONE of the serializers support the enforcement of xs:restriction so you can forget about the xs:minLength, xs:maxLength, or xs:pattern enforcement. Microsoft... please, please, please, please look at putting the work into your serializers so that they support the very basics of designing enterprise data contracts!!

  Read the article

• Deliberate Practice

  - by Jeff Foster

  It’s easy to assume, as software engineers, that there is little need to “practice” writing code. After all, we write code all day long! Just by writing a little each day, we’re constantly learning and getting better, right? Unfortunately, that’s just not true. Of course, developers do improve with experience. Each time we encounter a problem we’re more likely to avoid it next time. If we’re in a team that deploys software early and often, we hone and improve the deployment process each time we practice it. However, not all practice makes perfect. To develop true expertise requires a particular type of practice, deliberate practice, the only goal of which is to make us better programmers. Everyday software development has other constraints and goals, not least the pressure to deliver. We rarely get the chance in the course of a “sprint” to experiment with potential solutions that are outside our current comfort zone. However, if we believe that software is a craft then it’s our duty to strive continuously to raise the standard of software development. This requires specific and sustained efforts to get better at something we currently can’t do well (from Harvard Business Review July/August 2007). One interesting way to introduce deliberate practice, in a sustainable way, is the code kata. The term kata derives from martial arts and refers to a set of movements practiced either solo or in pairs. One of the better-known examples is the Bowling Game kata by Bob Martin, the goal of which is simply to write some code to do the scoring for 10-pin bowling. It sounds too easy, right? What could we possibly learn from such a simple example? Trust me, though, that it’s not as simple as five minutes of typing and a solution. Of course, we can reach a solution in a short time, but the important thing about code katas is that we explore each technique fully and in a controlled way. We tackle the same problem multiple times, using different techniques and making different decisions, understanding the ramifications of each one, and exploring edge cases. The short feedback loop optimizes opportunities to learn. Another good example is Conway’s Game of Life. It’s a simple problem to solve, but try solving it in a functional style. If you’re used to mutability, solving the problem without mutating state will push you outside of your comfort zone. Similarly, if you try to solve it with the focus of “tell-don’t-ask“, how will the responsibilities of each object change? As software engineers, we don’t get enough opportunities to explore new ideas. In the middle of a development cycle, we can’t suddenly start experimenting on the team’s code base. Code katas offer an opportunity to explore new techniques in a safe environment. If you’re still skeptical, my challenge to you is simply to try it out. Convince a willing colleague to pair with you and work through a kata or two. It only takes an hour and I’m willing to bet you learn a few new things each time. The next step is to make it a sustainable team practice. Start with an hour every Friday afternoon (after all who wants to commit code to production just before they leave for the weekend?) for month and see how that works out. Finally, consider signing up for the Global Day of Code Retreat. It’s like a daylong code kata, it’s on December 8th and there’s probably an event in your area!

  Read the article

• Top 5 Reasons to Invest in Enterprise 2.0 Technologies

  - by kellsey.ruppel(at)oracle.com

  In 2010, Oracle's portal, content management, and collaboration solutions evolved rapidly, supported by increasingly deep integrations across Oracle Fusion Middleware and the entire Oracle stack. In light of these developments, we asked Vince Casarez, vice president of Enterprise 2.0 product management, for his top five reasons to invest in Enterprise 2.0 (E2.0) technologies--including real-world examples of businesses already realizing the benefits of next-generation E2.0 technologies. 1. Provide a modern user experience As E2.0 technologies gain widespread adoption, customers and employees expect intuitive Web experiences that are both interactive and community-based. By partnering with Oracle, Alcatel-Lucent Enterprise Group is already making that happen. With 76,000 employees and operations in more than 100 countries, the company wanted a streamlined, personalized user experience with more relevant content in fewer clicks. Working with Oracle, they created a global support portal that supports personalization and integration with Oracle Business Intelligence Enterprise Edition and Oracle E-Business Suite--and drives collaboration with tools such as wikis, blogs, and forums. Learn more about Alcatel-Lucent Enterprise Group's Global Support Portal in this Webcast. 2. Improve productivity and collaboration As E2.0 technologies mature, Oracle anticipates companies moving beyond the idea of simply creating yet another Facebook-like destination for its employees, and instead shaping work environments around specific business tasks. After rapid growth--both organic and through acquisition--construction and infrastructure services leader Balfour Beatty found itself with multiple homegrown intranet sites with very minimal content-sharing capabilities. Today, thanks to Oracle WebCenter Suite, Oracle WebCenter Spaces, Oracle WebCenter Services, and Oracle Universal Content Management, Balfour Beatty is benefiting from collaborative workspaces, a central place to use and work with documents, and unified search across content. 3. Leverage business processes and applications Modern portals are now able to integrate users, content, and business processes in unprecedented ways. To take advantage of these new possibilities, leading dairy provider Land O'Lakes has implemented a fully integrated ERP solution together with Oracle's ECM platform. As a result, Land O'Lakes has been able to achieve better information management and compliance, increased adoption rates for enterprise tools, and increased business process efficiency thanks to more effective information sharing and collaboration. 4. Enhance customer and supplier relationships Companies have begun to move beyond the idea that E2.0 simply means enabling customer reviews or embedding chat functionality. They are taking E2.0 to the next level and providing interactive experiences for their customers. For example, to enhance customer and supplier relationships, Wind River, a global leader in device software optimization, successfully partnered with Oracle to: Integrate ERP and ECM content to provide customers the latest and most relevant support information for products they own Enable customers to personalize their support experience and receive updates regarding patches, application notes, and other relevant content Enable discussions, wikis, and blogs for more efficient collaboration 5. Increase business visibility and responsiveness By strategically embedding collaboration and communication tools into specific business contexts, companies significantly increase visibility into changing business conditions--and can respond much more agilely. Texas A&M University System--one of the largest systems of higher education in the U.S.--partnered with Oracle to create a unified repository that would enable the retrieval of research and grant data from disparate systems via an Enterprise 2.0 user interface. By enabling researchers to customize their own portals with easy-to-use tools, they have also been able to significantly reduce their reliance on the IT department. Learn how other Oracle customers are leveraging Enterprise 2.0 technologies.

  Read the article

• Move over DFS and Robocopy, here is SyncToy!

  - by andywe

  Ever since Windows 2000, I have always had the need to replicate data to multiple endpoints with the same content. Until DFS was introduced, the method of thinking was to either manually copy the data location by location, or to batch script it with xcopy and schedule a task. Even though this worked (and still does today), it was cumbersome, and intensive on the network, especially when dealing with larger amounts of data. Then along came robocopy, as an internal tool written by an enterprising programmer at Microsoft. We used it quite a bit, especially when we could not use DFS in the early days. It was received so well, it made it into the public realm. At least now we could have the ability to determine what files had changed and only replicate those. Well, over time there has been evolution of this ideal. DFS is obviously the Windows enterprise class service to do this, along with BrancheCache..however you don’t always need or want the power of DFS, especially when it comes to small datacenter installations, or remote offices. I have specific data sets that are on closed or restricted networks, that either have a security need for this, or are in remote countries where bandwidth is a premium. FOr this, I use the latest evolution for one off replication names Synctoy. Synctoy is from Microsoft, seemingly released in 2009, that wraps a nice GUI around setting up a paired set of folders (remember the mobile briefcase from Windows 98?), and allowing you the choice of synchronization methods. 1 way, or 2 way. Simply create a paired set of folders on the source and destination, choose your options for content, exclude any file types you don’t want to replicate, and click run. Scheduling is even easier. MS has included a wrapper for doing just this so all you enter in your task schedule in the SynToyCMD.exe, a –R as an argument, and the time schedule. No more complicated command lines or scripts.   I find this especially useful when I use MS backup to back up a system volume, but only want subsets of backup information of a data share and ONLY when that dataset has changed. Not relying on full backups and incremental. An example of this is my application installation master share. I back this up with SyncToy because I do not need multiple backup copies..one copy elsewhere suffices to back it up. At home, very useful for your pictures, videos, music, ect..the backup is online and ready to access, not waiting for you to restore a backup file, and no need to institute a domain simply to have DFS.'   Do note there is a risk..if you accidently delete a file and do not catch this before the next sync, then depending on your SyncToy settings, you can indeed lose that file as the destination updates..so due diligence applies. I make it a rule to sync manly one way…I use my master share for making changes, and allow the schedule to follow suit. Any real important file I lock down as read only through file permissions so it cannot be deleted unless I intervene.   Check out the tool and have some fun! http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=15155

  Read the article

• concurrency::extent<N> from amp.h

  - by Daniel Moth

  Overview We saw in a previous post how index<N> represents a point in N-dimensional space and in this post we'll see how to define the N-dimensional space itself. With C++ AMP, an N-dimensional space can be specified with the template class extent<N> where you define the size of each dimension. From a look and feel perspective, you'd expect the programmatic interface of a point type and size type to be similar (even though the concepts are different). Indeed, exactly like index<N>, extent<N> is essentially a coordinate vector of N integers ordered from most- to least- significant, BUT each integer represents the size for that dimension (and hence cannot be negative). So, if you read the description of index, you won't be surprised with the below description of extent<N> There is the rank field returning the value of N you passed as the template parameter. You can construct one extent from another (via the copy constructor or the assignment operator), you can construct it by passing an integer array, or via convenience constructor overloads for 1- 2- and 3- dimension extents. Note that the parameterless constructor creates an extent of the specified rank with all bounds initialized to 0. You can access the components of the extent through the subscript operator (passing it an integer). You can perform some arithmetic operations between extent objects through operator overloading, i.e. ==, !=, +=, -=, +, -. There are operator overloads so that you can perform operations between an extent and an integer: -- (pre- and post- decrement), ++ (pre- and post- increment), %=, *=, /=, +=, –= and, finally, there are additional overloads for plus and minus (+,-) between extent<N> and index<N> objects, returning a new extent object as the result. In addition to the usual suspects, extent offers a contains function that tests if an index is within the bounds of the extent (assuming an origin of zero). It also has a size function that returns the total linear size of this extent<N> in units of elements. Example code extent<2> e(3, 4); _ASSERT(e.rank == 2); _ASSERT(e.size() == 3 * 4); e += 3; e[1] += 6; e = e + index<2>(3,-4); _ASSERT(e == extent<2>(9, 9)); _ASSERT( e.contains(index<2>(8, 8))); _ASSERT(!e.contains(index<2>(8, 9))); grid<N> Our upcoming pre-release bits also have a similar type to extent, grid<N>. The way you create a grid is by passing it an extent, e.g. extent<3> e(4,2,6); grid<3> g(e); I am not going to dive deeper into grid, suffice for now to think of grid<N> simply as an alias for the extent<N> object, that you create when you encounter a function that expects a grid object instead of an extent object. Usage The extent class on its own simply defines the size of the N-dimensional space. We'll see in future posts that when you create containers (arrays) and wrappers (array_views) for your data, it is an extent<N> object that you'll need to use to create those (and use an index<N> object to index into them). We'll also see that it is a grid<N> object that you pass to the new parallel_for_each function that I'll cover in the next post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Extreme Makeover, Phone Edition: Comcasts xfinity

  Mobile Makeover For many companies the first foray into Windows Phone 7 (WP7) may be in porting their existing mobile apps. It is tempting to simply transfer existing functionality, avoiding the additional design costs. Readdressing business needs and taking advantage of the WP7 platform can reduce cost and is essential to a successful re-launch. To better understand the advantage of new development lets examine a conceptual upgrade of Comcasts existing mobile app. Before Comcast has a great mobile app that provides several key features. The ability to browse the lineup using a guide, a client for Comcast email accounts, On Demand gallery, and much more. We will leverage these and build on them using some of the incredible WP7 features.   After With the proliferation of DVRs (Digital Video Recorders) and a variety of media devices (TV, PC, Mobile) content providers are challenged to find creative ways to build their brands. Every client touch point must provide both value added services as well as opportunities for marketing and up-sale; WP7 makes it easy to focus on those opportunities. The new app is an excellent vehicle for presenting Comcasts newly rebranded TV, Voice, and Internet services. These services now fly under the banner of xfinity and have been expanded to provide the best experience for Comcast customers. The Windows Phone 7 app will increase the surface area of this service revolution.   The home menu is simplified and highlights Comcasts Triple Play: Voice, TV, and Internet. The inbox has been replaced with a messages view, and message management is handled by a WP7 hub. The hub presents emails, tweets, and IMs from Comcast and other viewers the user follows on Twitter.  The popular view orders shows based on the users viewing history and current cable package. The first show Glee is both popular and participating in a conceptual co-marketing effort, so it receives prime positioning. The second spot goes to a hit show on a premium channel, in this example HBOs The Pacific, encouraging viewers to upgrade for this premium content. The remaining spots are ordered based on viewing history and popularity. Tapping the play button moves the user to the theatre where they can watch previews or full episodes streaming from Fancast. Tapping an extra presents the user with show details as well as interactive content that may be included as part of co-marketing efforts. Co-Marketing with Dynamic Content The success of Comcasts services are tied to the success of the networks and shows it purveys, making co-marketing efforts essential. In this concept FOX is co-marketing its popular show Glee. A customized panorama is updated with the latest gleeks tweets, streaming HD episodes, and extras featuring photos and video of the cast. If WP7 apps can be dynamically extended with web hosted .xap files, including sandboxed partner experiences would enable interactive features such as the Gleek Peek, in which a viewer can select a character from a panorama to view the actors profile. This dynamic inline experience has a tailored appeal to aspiring creatives and is technically possible with Windows Phone 7.   Summary The conceptual Comcast mobile app for Windows Phone 7 highlights just a few of the incredible experiences and business opportunities that can be unlocked with this latest mobile solution. It is critical that organizations recognize and take full advantage of these new capabilities. Simply porting existing mobile applications does not leverage these powerful tools; re-examining existing applications and upgrading them to Windows Phone 7 will prove essential to the continued growth and success of your brand.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Cloud – the forecast is improving

  - by Rob Farley

  There is a lot of discussion about “the cloud”, and how that affects people’s data stories. Today the discussion enters the realm of T-SQL Tuesday, hosted this month by Jorge Segarra. Over the years, companies have invested a lot in making sure that their data is good, and I mean every aspect of it – the quality of it, the security of it, the performance of it, and more. Experts such as those of us at LobsterPot Solutions have helped these companies with this, and continue to work with clients to make sure that data is a strong part of their business, not an oversight. Whether business intelligence systems are being utilised or not, every business needs to be able to rely on its data, and have the confidence in it. Data should be a foundation upon which a business is built. In the past, data had been stored in paper-based systems. Filing cabinets stored vital information. Today, people have server rooms with storage of various kinds, recognising that filing cabinets don’t necessarily scale particularly well. It’s easy to ‘lose’ data in a filing cabinet, when you have people who need to make sure that the sheets of paper are in the right spot, and that you know how things are stored. Databases help solve that problem, but still the idea of a large filing cabinet continues, it just doesn’t involve paper. If something happens to the physical ‘filing cabinet’, then the problems are larger still. Then the data itself is under threat. Many clients have generators in case the power goes out, redundant cables in case the connectivity dies, and spare servers in other buildings just in case they’re required. But still they’re maintaining filing cabinets. You see, people like filing cabinets. There’s something to be said for having your data ‘close’. Even if the data is not in readable form, living as bits on a disk somewhere, the idea that its home is ‘in the building’ is comforting to many people. They simply don’t want to move their data anywhere else. The cloud offers an alternative to this, and the human element is an obstacle. By leveraging the cloud, companies can have someone else look after their filing cabinet. A lot of people really don’t like the idea of this, partly because the administrators of the data, those people who could potentially log in with escalated rights and see more than they should be allowed to, who need to be trusted to respond if there’s a problem, are now a faceless entity in the cloud. But this doesn’t mean that the cloud is bad – this is simply a concern that some people may have. In new functionality that’s on its way, we see other hybrid mechanisms that mean that people can leverage parts of the cloud with less fear. Companies can use cloud storage to hold their backup data, for example, backups that have been encrypted and are therefore not able to be read by anyone (including administrators) who don’t have the right password. Companies can have a database instance that runs locally, but which has its data files in the cloud, complete with Transparent Data Encryption if needed. There can be a higher level of control, making the change easier to accept. Hybrid options allow people who have had fears (potentially very justifiable) to take a new look at the cloud, and to start embracing some of the benefits of the cloud (such as letting someone else take care of storage, high availability, and more) without losing the feeling of the data being close. @rob_farley

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >