Search Results

Search found 4990 results on 200 pages for 'traffic measurement'.

Page 40/200 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • How to route traffic from VM (Parallels) over an Open VPN connection on the host (OS X)

    - by withakay
    Scenario: I have a Mac running Lion that is connected to an OpenVPN server I have a Windows XP VM (running on parallels, but I don't think this is important) I want to be able to route traffic from the XP VM via the host Mac's OpenVPN connection so that I can log on to a domain. The remote network is 172.16.0.0/23 (255.255.254.0) Open VPN is configured to supply address in the 10.100.101.0/24 range and sets up the routing to 172.16.0.0 using the gateway 10.100.101.1/32 My local network is 192.16.1.0/24 NOTE: I do not want to install OpenVPN into the XP virtual machine as I would have to use a passwordless key in order for OpenVPN to connect before logon. Anyone got any ideas?

    Read the article

  • How to forward http traffic through a specific network adapter.

    - by user18129
    i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

    Read the article

  • Can I pass HTTPS traffic from one port to another?

    - by Kit Sunde
    I'm doing a proxy_pass in nginx on port 80 to 8000 on my remote server, and then a port forward from 8000 to 80 from the remote to my localhost. This works great, but I'd also like to do it with https but it seems like nginx needs a valid cert to pass the traffic on. Is there a way for my remote server to simply forward the trafic from port 443 to say 8443 (and then I'll forward remote 8443 to local 443). Then terminate ssl on my development machine instead instead of needing to do it on the remote server? My remote runs ubuntu and my localhost runs osx.

    Read the article

  • How do I optimize a high traffic Wordpress website?

    - by mha
    Hello, I am running a wordpress based site which is now hosted on (mt) under DV-Extreme package 2GB+256MB addon RAM. It a muti author site where people are engaged in writing posts, comments, updating status etc. According to Google Analytics this month traffic Visitor = 45,764 Pageview = 1,051,186 Visit = 141,447 I have cdn my site, compress the css, used w3 Total cache plugin to optimize my site. Since last month I am getting several down notice from Pingdom. Right now I am facing more down alert than before. And have to restart my site several time to up again. Is my hosting resource is not enough? Do I need more resource? or what could be the solution? Helpful suggestion will be appreciated. Thanks.

    Read the article

  • How can I redirect HTTPS(S) traffic to anothr gateway?

    - by PsyStyle
    I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. Al the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for this I am using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway without touching the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a dnat like DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case

    Read the article

  • I run about 100 small traffic websites, what host would you recommend (expansion is planned)?

    - by MALON
    I know there are plenty of suggestions like asmallorange, linode, etc, but how well do these apply to someone who is running 100 sites? Traffic can be anywhere from zero hits a month up to about 1,000. The host I'm using right now doesn't allow access to httpd.conf or other important apache features. If I had to guess, it seems like Linode or other services like it are right up my alley, however, I am not great with linux. I can get by alright in Ubuntu, but that's about it. Will this knowledge be enough to get by with Linode? What about domain name transfers? The way it works now for me is if someone has an existing site, I ask them to get the domain transfer code and then I send the domain name xfer code to my current host and they take care of the rest. Does Linode take care of domain name transfers? How do I do it?

    Read the article

  • What kind of website traffic can a 10mpbs connection handle?

    - by Blankman
    I need some help understanding firewalls. I played around with Amazon EC2 and it seems to provide a firewall out-of-the-box. When I say firewall, to me that means the ability to block ports from being accessed from the outside world, or to only specific security groups. I'm looking at a dedicated server hosting provider and they provide a hardware firewall for $50/month and it is limited to 10mbps. Can someone explain to me what kind of traffic this correlates to? Are these usually limited to the number of simultaneous connections also?

    Read the article

  • Windows 2008 server and Redhat with only 1 ip address, can windows route the traffic?

    - by paulcap1
    I have a two home server VMs set up. Windows 2008 server on port 80 and Centos/Redhat on port 8080. Both have separate godaddy domain name A name records pointing to them. But I cant point both domain to the same IP I only have 1 wan ip address at home. So one of my domain is forward to my IP:8080. My question: Is it possible for my windows server to redirect a certain domain name to my Linux server on port 8080? So i Have mysite1.com going to windows and mysite2.com also going to the windows server but windows would redirect mysite2.com traffic to the linux ip address:8080. I want to access both sites at my work and my work firewall is strict and will not allow domain forwarding from godaddy.

    Read the article

  • What's the best way to forward traffic on a specific port to another machine?

    - by Ankit
    The setup I have is this: [client01] <-A-> [server01] <-B-> [server02] client01 can access port 9300 on server01 (connection A). server01 can access port 9300 on server02 (connection B). What's the best way to make all traffic on port 9300 to server01 go to port 9300 on server02? I can successfully do this with an ssh tunnel from client01 to server01 to server02, but I don't want to have to run ssh on client01. When I ssh from server01 to server02 forwarding port 9300 (ssh -g -L9300:localhost:9300 server02 on server01), it doesn't work -- am I using the wrong command?

    Read the article

  • How can I redirect HTTP(S) traffic to another gateway?

    - by PsyStyle
    I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. All the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for that I'm using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway keeping untouched the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a DNAT like: DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case.

    Read the article

  • routing through multiple subinterfaces in debian

    - by Kstro21
    my question is as simple as the title, i have a debian 6 , 2 NICs, 3 different subnets in a single interface, just like this: auto eth0 iface eth0 inet static address 192.168.106.254 netmask 255.255.255.0 auto eth0:0 iface eth0:0 inet static address 172.19.221.81 netmask 255.255.255.248 auto eth0:1 iface eth0:1 inet static address 192.168.254.1 netmask 255.255.255.248 auto eth1 iface eth1 inet static address 172.19.216.3 netmask 255.255.255.0 gateway 172.19.216.13 eth0 is conected to a swith with 3 differents vlans, eth1 is conected to a router. No iptables DROP, so, all traffic is allowed. Now, passing the traffic through eth0 is OK, passing the traffic through eth0:0 is OK, but, passing the traffic through eth0:1 is not working, i can ping the ip address of that sub interface from a pc where this ip is the default gateway, but can't get to servers in the subnet of the eth1 interface, the traffic is not passing, even when i set the iptables to log all the traffic in the FORWARD chain and i can see the traffic there, but, the traffic is not really passing. And the funny is i can do any the other way around, i mean, passing from eth1 to eth0:1, RDP, telnet, ping, etc, doing some work with the iptable, i manage to pass some traffic from eth0:1 to eth1, the iptables look like this: iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m multiport --dports 25,110,5269 -j DNAT --to-destination 172.19.216.1 iptables -t nat PREROUTING -d 192.168.254.1/32 -p udp -m udp --dport 53 -j DNAT --to-destination 172.19.216.9 iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m tcp --dport 21 -j DNAT --to-destination 172.19.216.11 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 172.19.221.80/29 -j SNAT --to-source 172.19.221.81 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 192.168.254.0/29 -j SNAT --to-source 192.168.254.1 iptables -t nat POSTROUTING -s 172.19.216.0/24 -o eth0 -j SNAT --to-source 192.168.106.254 dong this is working, but,it is really a headache have to map each port with the server, imagine if i move the service from server, so, now i have doubts: can debian route through multiple subinterfaces?? exist a limit for this?? if not, what i'm doing wrong when i have the same setup with other subnets and it is working ok?? without the iptables rules in the nat, it doesn't work thanks and i hope good comments/answers

    Read the article

  • How do I locate the app generating this network traffic?

    - by Christopher Bartels
    I don't know what this process is doing on my computer. I run Windows 7 Professional w/ all its updates running current non-free antivirus. I only see it in Resource Monitor, where you can see the Network Service process connected to bitum.nnov.ru. When my PC's network traffic generating apps are idle, this process is using the most of all the idle processes using the network. Screenshot hosted here: http://sss.proinbox.com/bitum-nnov-ru.jpg Does anyone recognize this? The page source mentions a control port & a stream port: Page Source for http://bitum.nnov.ru : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <title>DVR WebViewer</title> <meta http-equiv="Content-Type" content="text/html; charset=euc-kr"> </head> <body topmargin="0" leftmargin="0"> <OBJECT classid="clsid:EE479A40-C128-40DD-93DA-000556AF9607" codebase="CtrWeb.cab#version=1,0,2,2" width=875 height=585 align=center hspace=0 vspace=0 > <param name="CmdPort" value="5920"> <param name="StreamPort" value="5921"> </body> </html> When I google this page's title, I see a number of other domains that host the same page. Whois: domain: NNOV.RU nserver: ns.kis.ru. nserver: ns.nnov.ru. 78.25.80.210 nserver: ns1.kis.ru. nserver: ns2.kis.ru. state: REGISTERED, DELEGATED, VERIFIED org: "Agentstvo Delovoj Svjazi", Ltd registrar: RU-CENTER-REG-RIPN admin-contact: https://www.nic.ru/whois created: 1996.10.23 paid-till: 2012.11.01 free-date: 2012.12.02 source: TCI Last updated on 2012.06.16 04:20:46 MSK

    Read the article

  • How do I tell ubuntu to send traffic to a single IP through eth6?

    - by flashnode
    I want to ensure that all IP traffic going to 172.16.60.62 uses eth6. Please provide complete commands because my linux-fu is rusty. The host is running Ubuntu Precise 12.04 user@host:~$ ifconfig eth3 eth3 Link encap:Ethernet HWaddr 00:e0:81:72:fe:c9 inet addr:172.16.60.122 Bcast:172.16.60.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:81ff:fe72:fec9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:128500 errors:0 dropped:0 overruns:0 frame:0 TX packets:29082 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67524823 (67.5 MB) TX bytes:2217634 (2.2 MB) Interrupt:71 Base address:0x6000 user@host:~$ ifconfig eth6 eth6 Link encap:Ethernet HWaddr 00:60:dd:47:81:35 inet addr:172.16.60.61 Bcast:172.16.60.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:8135/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:109610 errors:0 dropped:0 overruns:0 frame:0 TX packets:109388 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10785630 (10.7 MB) TX bytes:10754350 (10.7 MB) Interrupt:70 user@host:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.60.1 0.0.0.0 UG 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth6 172.16.60.0 0.0.0.0 255.255.255.0 U 1 0 0 eth6 172.16.60.0 0.0.0.0 255.255.255.0 U 1 0 0 eth3

    Read the article

  • Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

    - by posdef
    I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

    Read the article

  • Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

    - by David Bullock
    So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

    Read the article

  • Redirect traffic from 127.0.0.1 to 127.0.0.1 on port 53 to port 5300 with iptables

    - by Zagorax
    I'm running a local dns server on port 5300 to develop a software. I need my machine to use that dns but I wasn't able to tell /etc/resolv.conf to check on a different port. I searched a bit on google and I didn't find a solution. I set 127.0.0.1 as nameserver on /etc/resolv.conf. This is my whole /etc/resolv.conf: nameserver 127.0.0.1 Could you please tell me how can I redirect outbound traffic on port 53 to another port? I tried the following but it didn't work: iptables -t nat -A PREROUTING -p tcp --dport 53 -j DNAT --to 127.0.0.1:5300 iptables -t nat -A PREROUTING -p udp --dport 53 -j DNAT --to 127.0.0.1:5300 Here is the output of iptables -t nat -L -v -n (with suggested rules): Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 redir ports 5300 0 0 REDIRECT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 redir ports 5300 Chain POSTROUTING (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination

    Read the article

  • iptables rule(s) to send openvpn traffic from clients over an sshuttle tunnel?

    - by Sam Martin
    I have an Ubuntu 12.04 box with OpenVPN. The VPN is working as expected -- clients can connect, browse the Web, etc. The OpenVPN server IP is 10.8.0.1 on tun0. On that same box, I can use sshuttle to tunnel into another network to access a Web server on 10.10.0.9. sshuttle does its magic using the following iptables commands: iptables -t nat -N sshuttle-12300 iptables -t nat -F sshuttle-12300 iptables -t nat -I OUTPUT 1 -j sshuttle-12300 iptables -t nat -I PREROUTING 1 -j sshuttle-12300 iptables -t nat -A sshuttle-12300 -j REDIRECT --dest 10.10.0.0/24 -p tcp --to-ports 12300 -m ttl ! --ttl 42 iptables -t nat -A sshuttle-12300 -j RETURN --dest 127.0.0.0/8 -p tcp Is it possible to forward traffic from OpenVPN clients over the sshuttle tunnel to the remote Web server? I'd ultimately like to be able to set up any complicated tunneling on the server, and have relatively "dumb" clients (iPad, etc.) be able to access the remote servers via OpenVPN. Below is a basic diagram of the scenario: [Edit: added output from the OpenVPN box] $ sudo iptables -nL -v -t nat Chain PREROUTING (policy ACCEPT 1498 packets, 252K bytes) pkts bytes target prot opt in out source destination 1512 253K sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 322 packets, 58984 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 584 packets, 43241 bytes) pkts bytes target prot opt in out source destination 587 43421 sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain POSTROUTING (policy ACCEPT 589 packets, 43595 bytes) pkts bytes target prot opt in out source destination 1175 76298 MASQUERADE all -- * eth0 10.8.0.0/24 0.0.0.0/0 Chain sshuttle-12300 (2 references) pkts bytes target prot opt in out source destination 17 1076 REDIRECT tcp -- * * 0.0.0.0/0 10.10.0.0/24 TTL match TTL != 42 redir ports 12300 0 0 RETURN tcp -- * * 0.0.0.0/0 127.0.0.0/8 $ sudo iptables -nL -v -t filter Chain INPUT (policy ACCEPT 97493 packets, 30M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 131K 109M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1370 89160 ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable [Edit 2: more OpenVPN server output] $ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 [Edit 3: still more debug output] IP forwarding appears to be enabled correctly on the OpenVPN server: # find /proc/sys/net/ipv4/conf/ -name forwarding -ls -execdir cat {} \; 18926 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/all/forwarding 1 18954 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/default/forwarding 1 18978 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/eth0/forwarding 1 19003 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/lo/forwarding 1 19028 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/tun0/forwarding 1 Client routing table: $ netstat -r Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 8 48 tun0 default 192.168.1.1 UGSc 2 1652 en1 10.8.0.1/32 10.8.0.5 UGSc 1 0 tun0 10.8.0.5 10.8.0.6 UHr 13 0 tun0 10.10.0/24 10.8.0.5 UGSc 0 0 tun0 <snip> Traceroute from client: $ traceroute 10.10.0.9 traceroute to 10.10.0.9 (10.10.0.9), 64 hops max, 52 byte packets 1 10.8.0.1 (10.8.0.1) 5.403 ms 1.173 ms 1.086 ms 2 192.168.1.1 (192.168.1.1) 4.693 ms 2.110 ms 1.990 ms 3 l100.my-verizon-garbage (client-ext-ip) 7.453 ms 7.089 ms 6.248 ms 4 * * * 5 10.10.0.9 (10.10.0.9) 14.915 ms !N * 6.620 ms !N

    Read the article

  • Security Access Control With Solaris Virtualization

    - by Thierry Manfe-Oracle
    Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

    Read the article

  • The Growing Importance of Network Virtualization

    - by user12608550
    The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

    Read the article

  • Cablemodem (SBG6580) firewall denying some outbound traffic? Why? Not configured [migrated]

    - by lairdb
    I finally got around to turning the syslog on for my cablemodem (Motorola Surfboard SBG6580) and I'm seeing about the expected amount of inbound attackage being blocked... 2014-05-30 21:59:02 Local0.Alert 192.168.111.1 May 31 04:58:56 2014 SYSLOG[0]: [Host 192.168.111.1] UDP 12.230.209.198,4500 --> 66.27.xx.xx,61459 DENY:Firewall interface [IP Fragmented Packet] attack 2014-05-30 21:59:02 Local0.Alert 192.168.111.1 May 31 04:58:56 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 17.172.232.109,5223 --> 66.27.xx.xx,53814 DENY:Firewall interface access request 2014-05-30 21:59:02 Local0.Alert 192.168.111.1 May 31 04:58:57 2014 SYSLOG[0]: [Host 192.168.111.1] UDP 12.230.209.198,443 --> 66.27.xx.xx,53385 DENY: Firewall interface [IP Fragmented Packet] attack 2014-05-30 21:59:02 Local0.Alert 192.168.111.1 May 31 04:58:57 2014 SYSLOG[0]: [Host 192.168.111.1] UDP 12.230.209.198,4500 --> 66.27.xx.xx,61459 DENY:Firewall interface [IP Fragmented Packet] attack 2014-05-30 21:59:10 Local0.Alert 192.168.111.1 May 31 04:59:04 2014 SYSLOG[0]: [Host 192.168.111.1] UDP 12.230.209.198,443 --> 66.27.xx.xx,59960 DENY: Firewall interface [IP Fragmented Packet] attack 2014-05-30 21:59:10 Local0.Alert 192.168.111.1 May 31 04:59:04 2014 SYSLOG[0]: [Host 192.168.111.1] UDP 12.230.209.198,4500 --> 66.27.xx.xx,61459 DENY:Firewall interface [IP Fragmented Packet] attack ...and that's great. (Sad, but great.) But I'm also seeing a HUGE amount of what appears to be denied outbound connectivity: 2014-05-30 16:30:10 Local0.Alert 192.168.111.1 May 30 23:30:04 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 192.168.111.100,58969 --> 38.81.66.127,443 DENY: Inbound or outbound access request 2014-05-30 16:30:10 Local0.Alert 192.168.111.1 May 30 23:30:04 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 192.168.111.100,58969 --> 38.81.66.127,443 DENY: Inbound or outbound access request 2014-05-30 16:30:10 Local0.Alert 192.168.111.1 May 30 23:30:04 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 192.168.111.100,58965 --> 162.222.41.13,443 DENY: Inbound or outbound access request 2014-05-30 16:30:10 Local0.Alert 192.168.111.1 May 30 23:30:04 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 192.168.111.100,58965 --> 162.222.41.13,443 DENY: Inbound or outbound access request 2014-05-30 16:30:10 Local0.Alert 192.168.111.1 May 30 23:30:04 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 192.168.111.100,58964 --> 38.81.66.179,443 DENY: Inbound or outbound access request 2014-05-30 16:30:10 Local0.Alert 192.168.111.1 May 30 23:30:04 2014 SYSLOG[0]: [Host 192.168.111.1] TCP 192.168.111.100,58964 --> 38.81.66.179,443 DENY: Inbound or outbound access request ...and Spot checking suggests that it's all legitimate traffic (Opening connections to CrashPlan, etc.), I have no restrictions configured in the modem; I don't see why it should be blocking anything. Am I misreading the log entry, and it's not actually being denied? (Seems unlikely.) Is the ISP (TWC) pushing deny tables that are not exposed in the UI? (Tinfoil hat too tight.) I'm confused. (The good news, such as it is, is that AFAIK I'm not experiencing any actual issues... but maybe I am; tough to tell.) Thanks.

    Read the article

  • Can I make ruby send network traffic over a specific iface?

    - by rjorgenson
    I am writing a script that grabs the external IP address along with some other information about each iface. I can't figure out how to make ruby send traffic over a specific iface(eth0 and wlan0 for example). I am currently using the open-uri library to open http://whatismyip.org and read it into a variable. def get_external_ip begin open("http://whatismyip.org") { |f| return f.read } rescue return "none" end end Is there any way to specify this at runtime of the script or from within the script itself(ideally)?

    Read the article

  • amazon simpledb with aws-sdb-proxy suitable for high traffic production app?

    - by z3cko
    i am using amazon simpledb with the aws_sdb gem and aws-sdb proxy as outlined in a documentation from amazon with ruby on rails and a local aws proxy that runs on webrick (providing a bridge with ActiveResource). see http://developer.amazonwebservices.com/connect/entry.jspa?externalID=1242 i am wondering if the aws-sdb-proxy (webrick!) is suitable for high traffic load, since webrick is supposed to be a development server. anyone has comments or experiences?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >