Search Results

Search found 54078 results on 2164 pages for 'ubuntu 10 04 lts'.

Page 40/2164 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• I Cannot connect to remote MySQL database using SSH tunnel

  - by Scott

  Brand new server, brand new MySQL 5.5 install on Ubuntu 12.04. I can log in to the database as root from the command line. I can log on via Navicat MySQL or Sequel Pro as root on port 3306 from my Mac. I cannot log in using an SSH tunnel to the server and then to the database as root. I have tried both localhost and 127.0.0.1 as server for the local connection part. My password is fine. root is currently defined at %, 127.0.0.1, and localhost. I have set up this same type of connection at least 30 times before and never had a problem. The SSH connection gets made with no problem, and then it just hangs trying to connect to the DB and finally times out. The only thing I changed in my.cnf was to comment out the bind-address = 127.0.0.1 line. Any help? Any Ideas?

  Read the article

• How do I share files with someone who does not have a ubuntu one account

  - by Bob

  I tried to search for an answer, except that, uhhh there is no search. I want to share a Ubuntu One folder with people who do not have a Ubuntu One account. Is that possible? I found this answer in the faq, "Yes! Since Ubuntu 10.04 LTS, Ubuntu One supports sharing files publicly. Right click on a file already synchronized by Ubuntu One and select "Publish via Ubuntu One". Right-click on the file again and select "Copy Ubuntu One public URL". You can now paste the URL and share it with whoever you want." That doesn't seem to help me with 11.04. There is no 'Publish via Ubuntu One' button in 11.04. Does anyone know if there is a way to share files with non-ubuntu users? If so, how? Thanks In Advance, Bob

  Read the article

• Podcast Show Notes: Collaborate 10 Wrap-Up - Part 1

  - by Bob Rhubart

  OK, I know last week I promised you a program featuring Oracle ACE Directors Mike van Alst (IT-Eye) and Jordan Braunstein (TUSC) and The Definitive Guide to SOA: Oracle Service Bus author Jeff Davies. But things happen. In this case, what happened was Collaborate 10 in Las Vegas. Prior to the event I asked Oracle ACE Director and OAUG board member Floyd Teter to see if he could round up a couple of people at the event for an impromtu interview over Skype (I was here in Cleveland) to get their impressions of the event. Listen to Part 1 Floyd, armed with his brand new iPad, went above and beyond the call of duty. At the appointed hour, which turned out to be about hour after the close of Collaborate 10,  Floyd had gathered nine other people to join him in a meeting room somewhere in the Mandalay Bay Convention Center. Here’s the entire roster: Floyd Teter - Project Manager at Jet Propulsion Lab, OAUG Board Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Mark Rittman - EMEA Technical Director and Co-Founder, Rittman Mead,  ODTUG Board Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Chet Justice - OBI Consultant at BI Wizards Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Elke Phelps - Oracle Applications DBA at Humana, OAUG SIG Chair Blog | LinkedIn | Oracle Mix | Book | Oracle ACE Profile Paul Jackson - Oracle Applications DBA at Humana Blog | LinkedIn | Oracle Mix | Book Srini Chavali - Enterprise Database & Tools Leader at Cummins, Inc Blog | LinkedIn | Oracle Mix Dave Ferguson – President, Oracle Applications Users Group LinkedIn | OAUG Profile John King - Owner, King Training Resources Website | LinkedIn | Oracle Mix Gavyn Whyte - Project Portfolio Manager at iFactory Consulting Blog | Twitter | LinkedIn | Oracle Mix John Nicholson - Channels & Alliances at Greenlight Technologies Website | LinkedIn Big thanks to Floyd for assembling the panelists and handling the on-scene MC/hosting duties.  Listen to Part 1 On a technical note, this discussion was conducted over Skype, using Floyd’s iPad, placed in the middle of the table.  During the call the audio was fantastic – the iPad did a remarkable job. Sadly, the Technology Gods were not smiling on me that day. The audio set-up that I tested successfully before the call failed to deliver when we first connected – I could hear the folks in Vegas, but they couldn’t hear me. A frantic, last-minute adjustment appeared to have fixed that problem, and the audio in my headphones from both sides of the conversation was loud and clear.  It wasn’t until I listened to the playback that I realized that something was wrong. So the audio for Vegas side of the discussion has about the same fidelity as a cell phone. It’s listenable, but disappointing when compared to what it sounded like during the discussion. Still, this was a one shot deal, and the roster of panelists and the resulting conversation was too good and too much fun to scrap just because of an unfortunate technical glitch.   Part 2 of this Collaborate 10 Wrap-Up will run next week. After that, it’s back on track with the previously scheduled program. So stay tuned: RSS del.icio.us Tags: oracle,otn,collborate 10,c10,oracle ace program,archbeat,arch2arch,oaug,odtug,las vegas Technorati Tags: oracle,otn,collborate 10,c10,oracle ace program,archbeat,arch2arch,oaug,odtug,las vegas

  Read the article

• ERR_INCOMPLETE_CHUNKED_ENCODING apache 2.4

  - by Bujanca Mihai

  I upgraded my Ubuntu server to 14.04 and Apache 2.4.7. Now my images don't load and console yields net::ERR_INCOMPLETE_CHUNKED_ENCODING. Also, I can sometimes see some of the images load for a little while (1 sec max) and then they disappear. .htaccess RewriteEngine On # Serve the favicon file from img folder RewriteCond %{REQUEST_URI} ^/favicon.ico$ RewriteRule ^(.*)$ /img/$1 [NC,L] # Redirect HTTP traffic to WWW subdomain RewriteCond %{HTTPS} off [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] # Redirect HTTPS traffic to WWW subdomain RewriteCond %{HTTPS} on [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ https://www.%{HTTP_HOST}/$1 [R=301,L] # Auto Versioning rules RewriteCond %{REQUEST_FILENAME} !-s RewriteRule ^(.*)\.[\d]+\.(css|js)$ $1.$2 [L] # Default Zend rewrite rules RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] VHost <VirtualHost *:80> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD-access.log combined </VirtualHost> <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-ssl-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire #<FilesMatch "\.(cgi|shtml|phtml|php)$"> # SSLOptions +StdEnvVars #</FilesMatch> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. #BrowserMatch ".*MSIE.*" \ # nokeepalive ssl-unclean-shutdown \ # downgrade-1.0 force-response-1.0 </VirtualHost> </IfModule> logs Apache/2.4.7 (Ubuntu) PHP/5.5.9-1ubuntu4.3 OpenSSL/1.0.1f (internal dummy connection) 127.0.0.1 - - [25/Aug/2014:13:09:53 +0300] "GET /img/header/top-nav-separator.png HTTP/1.1" 200 462 "https://localhost/art" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/34.0.1847.132 Safari/537.36"

  Read the article

• My SMTP's outgoing mail gets bounced

  - by BloodPhilia

  I've got a ISPconfig 3 production server set up, running Ubuntu Server 9.04. My e-mail gets delivered ok to almost every other server I send mail to except for one (smtp.chello.nl which bounces my email). In my /var/log/mail.err I found the below error. Sep 23 08:59:33 <MYHOSTNAME> postfix/smtp[26944]: 3DB2B1456149: to=<<RECIPIENT>@chello.nl>, relay=smtp.chello.nl[213.46.255.2]:25, delay=2, delays=0.02/0.01/1.9/0.04, dsn=5.1.0, status=bounced (host smtp.chello.nl[213.46.255.2] said: 550 5.1.0 Dynamic/Generic hostnames are blocked. Please contact your Email Provider. Your IP was <MY IP>. Your hostname was ??. (in reply to MAIL FROM command)) What could be the cause of this? I did an SMTP check on mxtools.com and got the following: OK - Not an open relay OK - 0 seconds - Good on Connection time OK - 1.482 seconds - Good on Transaction time OK - 83.161.xx.xx resolves to a83-161-xx-xx.xxx.xxx.nl WARNING - Reverse DNS does not match SMTP Banner Update: My IP is static.

  Read the article

• HAProxy: Display a "BADREQ" | BADREQ's by the thousands

  - by GruffTech

  My HAProxy Configuration. #HA-Proxy version 1.3.22 2009/10/14 Copyright 2000-2009 Willy Tarreau <[email protected]> global maxconn 10000 spread-checks 50 user haproxy group haproxy daemon stats socket /tmp/haproxy log localhost local0 log localhost local1 notice defaults mode http maxconn 50000 timeout client 10000 option forwardfor except 127.0.0.1 option httpclose option httplog listen dcaustin 0.0.0.0:80 mode http timeout connect 12000 timeout server 60000 timeout queue 120000 balance roundrobin option httpchk GET /index.html log global option httplog option dontlog-normal server web1 10.10.10.101:80 maxconn 300 check fall 1 server web2 10.10.10.102:80 maxconn 300 check fall 1 server web3 10.10.10.103:80 maxconn 300 check fall 1 server web4 10.10.10.104:80 maxconn 300 check fall 1 listen stats 0.0.0.0:9000 mode http balance log global timeout client 5000 timeout connect 4000 timeout server 30000 stats uri /haproxy HAProxy is running, and the socket is working... adam@dcaustin:/etc/haproxy# echo "show info" | socat stdio /tmp/haproxy Name: HAProxy Version: 1.3.22 Release_date: 2009/10/14 Nbproc: 1 Process_num: 1 Pid: 6320 Uptime: 0d 0h14m58s Uptime_sec: 898 Memmax_MB: 0 Ulimit-n: 20017 Maxsock: 20017 Maxconn: 10000 Maxpipes: 0 CurrConns: 47 PipesUsed: 0 PipesFree: 0 Tasks: 51 Run_queue: 1 node: dcaustin desiption: Errors show nothing from socket... adam@dcaustin:/etc/haproxy# echo "show errors" | socat stdio /tmp/haproxy adam@dcaustin:/etc/haproxy# However... My Error log is exploding with "badrequests" with the Error code cR. cR (according to 1.3 documentation) is The "timeout http-request" stroke before the client sent a full HTTP request. This is sometimes caused by too large TCP MSS values on the client side for PPPoE networks which cannot transport full-sized packets, or by clients sending requests by hand and not typing fast enough, or forgetting to enter the empty line at the end of the request. The HTTP status code is likely a 408 here. Correct on the 408, but we're getting literally thousands of these requests every hour. (This log snippet is an clip for about 10 seconds of time...) Jun 30 11:08:52 localhost haproxy[6320]: 92.22.213.32:26448 [30/Jun/2011:11:08:42.384] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10002 408 212 - - cR-- 35/35/18/0/0 0/0 "<BADREQ>" Jun 30 11:08:54 localhost haproxy[6320]: 71.62.130.24:62818 [30/Jun/2011:11:08:44.457] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10001 408 212 - - cR-- 39/39/16/0/0 0/0 "<BADREQ>" Jun 30 11:08:55 localhost haproxy[6320]: 84.73.75.236:3589 [30/Jun/2011:11:08:45.021] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10008 408 212 - - cR-- 35/35/15/0/0 0/0 "<BADREQ>" Jun 30 11:08:55 localhost haproxy[6320]: 69.39.20.190:49969 [30/Jun/2011:11:08:45.709] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 37/37/16/0/0 0/0 "<BADREQ>" Jun 30 11:08:56 localhost haproxy[6320]: 2.29.0.9:58772 [30/Jun/2011:11:08:46.846] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10001 408 212 - - cR-- 43/43/22/0/0 0/0 "<BADREQ>" Jun 30 11:08:57 localhost haproxy[6320]: 212.139.250.242:57537 [30/Jun/2011:11:08:47.568] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 42/42/21/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55046 [30/Jun/2011:11:08:48.559] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 46/46/24/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55044 [30/Jun/2011:11:08:48.554] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10004 408 212 - - cR-- 45/45/24/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55045 [30/Jun/2011:11:08:48.554] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10005 408 212 - - cR-- 44/44/24/0/0 0/0 "<BADREQ>" Jun 30 11:09:00 localhost haproxy[6320]: 68.197.56.2:52781 [30/Jun/2011:11:08:50.975] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 49/49/28/0/0 0/0 "<BADREQ>" From what I read on google, if i wanted to see what the bad requests are, I can show errors to the socket and it will spit them out. We do run a pretty heavily trafficed website and the percentage of "BADREQS" to normal requests is quite low, but I'd like to be able to get ahold of what that request WAS so I can debug it. stats # pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,tracked,type,rate,rate_lim,rate_max, dcaustin,FRONTEND,,,64,120,50000,88433,105889100,2553809875,0,0,4641,,,,,OPEN,,,,,,,,,1,1,0,,,,0,45,0,128, dcaustin,web1,0,0,10,28,300,20941,25402112,633143416,,0,,0,3,0,0,UP,1,1,0,0,0,2208,0,,1,1,1,,20941,,2,11,,30, dcaustin,web2,0,0,9,30,300,20941,25026691,641475169,,0,,0,3,0,0,UP,1,1,0,0,0,2208,0,,1,1,2,,20941,,2,11,,30, dcaustin,web3,0,0,10,27,300,20940,30116527,635015040,,0,,0,9,0,0,UP,1,1,0,0,0,2208,0,,1,1,3,,20940,,2,10,,31, dcaustin,web4,0,0,5,28,300,20940,25343770,643209546,,0,,0,8,0,0,UP,1,1,0,0,0,2208,0,,1,1,4,,20940,,2,11,,31, dcaustin,BACKEND,0,0,34,95,50000,83762,105889100,2553809875,0,0,,0,34,0,0,UP,4,4,0,,0,2208,0,,1,1,0,,83762,,1,43,,122, 88500 "Sessions" and 4500 errors. in the last 20 minutes.

  Read the article

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• How to find cause of main file system going to read only mode

  - by user606521

  Ubuntu 12.04 File system goes to readonly mode frequently. First of all I have read this question file system is going into read only mode frequently already. But I have to know if it's not caused by something else than dying hard drive. This is server provided by my client and I am just runing there some node.js workers + one node.js server and I am using mongodb. From time to time (every 20-50h) system suddenly makes filesystem read only, mongodb process fails (due read-only fs) and my node workers/server (which are started by forever) are just killed. Here is the log from dmesg - I can see there some errors and messages that FS is going to read-only, and there is also some JOURNAL error but I would like to find cause of those errors.. http://speedy.sh/Ux2VV/dmesg.log.txt edit smartctl -t long /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-23-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. What I am doing wrong? Same is for sda2. Morover now when I type any command that not exists in shell I get this: Sorry, command-not-found has crashed! Please file a bug report at: https://bugs.launchpad.net/command-not-found/+filebug Please include the following information with the report:

  Read the article

• Route forwarded traffic through eth0 but local traffic through tun0

  - by Ross Patterson

  I have a Ubuntu 12.04/Zentyal 2.3 server configured with WAN NATed on eth0, local interfaces eth1 and wlan0 bridged on br1 on which DHCP runs, and an OpenVPN connection on tun0. I only need the VPN for some things running on the gateway itself and I need to make sure that everything running on the gateway goes through the VPNs tun0. root:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gw... 0.0.0.0 UG 100 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 br1 192.168.1.0 * 255.255.255.0 U 0 0 0 br1 A.B.C.0 * 255.255.255.0 U 0 0 0 eth0 root:~# ip route 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.186 root:~# ip route show table main 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.D root:~# ip route show table default default via A.B.C.1 dev eth0 How can I configure routing (or otherwise) such that all forwarded traffic for other hosts on the LAN goes through eth0 but all traffic for the gateway itself goes through the VPN on tun0? Also, since the OpenVPN client changes routing on startup/shutdown, how can I make sure that everything running on the gateway itself loses all network access if the VPN goes down and never goes out eth0.

  Read the article

• Lync 2010, Kamailio, & Trixbox 2.6.23 (Asterisk 1.4)

  - by slashp

  I'm having an issue trying to connect Lync 2010 phone calls with our trixbox PBX. I've gotten to the point where Kamailio seems to be functioning properly and acting as a bridge between TCP traffic (from Lync) & UDP traffic (to the trixbox, as Asterisk 1.4 does not support SIP over TCP). Our Lync box IP: 10.100.10.41 Our Kamailio box IP: 10.100.10.44 Our trixbox IP: 10.100.10.2 The issue I'm running into is as follows when enabling SIP debugging for the Kamailio box: <--- SIP read from 10.100.10.44:5060 ---> PRACK sip:TNECLTSLY01.contoso.com:5068;transport=Tcp;maddr=10.100.10.41 SIP/2.0 FROM: <sip:9121;[email protected];user=phone>;epid=CF2380792B;tag=4852bab430 TO: <sip:[email protected].10.44;user=phone>;epid=CF2380792B;tag=3684a6a24e CSEQ: 24 PRACK CALL-ID: 192daae6-00e1-4140-bddd-0394b35d475b MAX-FORWARDS: 70 Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d VIA: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK159fc989 CONTACT: <sip:TNECLTSLY01.contoso.com:5068;transport=Tcp;maddr=10.100.10.41> CONTENT-LENGTH: 0 USER-AGENT: RTCC/4.0.0.0 MediationServer RAck: 1 23 INVITE <-------------> --- (12 headers 0 lines) --- Sending to 10.100.10.44 : 5060 (NAT) <--- Transmitting (NAT) to 10.100.10.44:5060 ---> SIP/2.0 481 Call leg/transaction does not exist Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d;received=10.100.10.44 Via: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK159fc989 From: <sip:9121;[email protected];user=phone>;epid=CF2380792B;tag=4852bab430 To: <sip:[email protected].10.44;user=phone>;epid=CF2380792B;tag=3684a6a24e Call-ID: 192daae6-00e1-4140-bddd-0394b35d475b CSeq: 24 PRACK User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 <------------> trixbox1*CLI> <--- SIP read from 10.100.10.44:5060 ---> ACK sip:[email protected].10.44;user=phone SIP/2.0 FROM: "John Jones"<sip:9121;[email protected];user=phone>;tag=4852bab430;epid=CF2380792B TO: <sip:[email protected].10.44;user=phone>;tag=3684a6a24e;epid=CF2380792B CSEQ: 23 ACK CALL-ID: 192daae6-00e1-4140-bddd-0394b35d475b MAX-FORWARDS: 70 Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d VIA: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK79a21c CONTENT-LENGTH: 0 My SIP trunk on the trixbox looks like this: [from-lync] exten => _+4XXX!,1,Noop(Stripping + from start of number) exten => _+4XXX!,n,Goto(from-internal,${EXTEN:1}) Though I am still having no luck getting the + stripped or the call to go through. Any ideas would be greatly appreciated. Thank you! -slashp

  Read the article

• What to do before connecting Ubuntu Server to the internet for the first time?

  - by CodeMonkey

  I just finished installing Ubuntu Server 12.10 on an Asus Eee PC 1000H (to be used as a home server/sandbox) from USB. I installed this software during installation: OpenSSH server LAMP server Samba file server Virtual Machine host I won't use 2, 3 or 4 for a while though. Can/should I turn these off somehow? I have turned home directory encryption on. Security updates are installed automatically. I have chosen a strong password for the single user. I have never plugged in the internet cable so far. Before doing so I'd like to ask: What can/should I do/install to increase security before connecting to the internet? Firewall? Fail2ban? Users/Passwords? Encryption? Enable/Disable functionality? etc. I'm sorry if you get this question a lot. I've searched around quite a while, but it still feels like I might overlook something important.

  Read the article

• Ubuntu server failing daily

  - by deanvz

  Symptoms: Server becomes unresponsive - Increase in load, all services stop Loss of connectivity - Ping/SSH Flush MySQL hosts after reboot - As MySQL refuses new connections Intermittent Apache crashes Generally happens early morning hours - 2 days of the week are however excluded Changes made: Updated the OS - to Ubuntu 10.04.4 LTS Not sure if the MySQL server was also updated in the process Current MySQL version - mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (x86_64) using readline 6.1 Updated Plesk from 10.4.4 Update #47 to 11.0.9 Update #23 Rebooted on almost daily basis All crons stopped for the times corresponding to the server crashes Created a MySQL log to monitor the lock times on queries Possible causes: Failing hardware Incorrect software configuration (MySQL, Apache etc) Responsibilities: Small webserver Runs our billing system - WHMCS Responsible for CRONs Bulk-email solution - No delivery times coincide with server crashes Proposed solutions: Move machine over to VM Format and restore the Plesk server backup and take it from there? Side notes: Seems to be a general Apache failure across all our linux servers - Intermittent problem Are we doing something fundamentally wrong in the Apache config? (I understand that this is a secondary question, just making sure that it isnt possibly holding any relevance)

  Read the article

• RAID 5 Install on Ubuntu Server 12.04 [closed]

  - by tarabyte

  Environment: Ubuntu Server 12.04, installing from bootable flash drive Error: No root file system is defined. Please correct this from the partitioning menu. I'm trying to set up a personal file server with software RAID 5. I just got three hard drives for this, but haven't found any solid documentation. I'm unsure what the basic way to partition my hard drives is. Can someone upload a screenshot of their "partition disks" screen so that I can compare with mine (attached)? Should I set the bootable flag? Do I need a /home partition? A /boot partition? Should I "Use [my partition] as: Ext4 journaling file system"? Or make that field "physical volume for RAID"? I am an engineer, but I have only a cursory knowledge of all-things-linux. If you know of any good learning resources I'd be happy to hear about those too (that way I don't have to blindly follow deprecated tutorials online). well, image would be here but i don't have a high enough reputation yet (please vote up :)) Thank you, References I've looked into: https://help.ubuntu.com/community/Installation/SoftwareRAID https://help.ubuntu.com/12.04/serverguide/advanced-installation.html http://forevergeeks.com/setup-ubuntu-server-with-raid-5/

  Read the article

• GlusterFS is failing to mount on boot

  - by J. Pablo Fernández

  I'm running the official GlusterFS 3.5 packages on Ubuntu 12.04 and everything seems to be working fine, except mounting the GlusterFS volumes at boot time. This is what I see in the log files: [2014-06-13 08:52:28.139382] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.0 (/usr/sbin/glusterfs --volfile-server=koraga --volfile-id=/private_uploads /var/www/shared/private/uploads) [2014-06-13 08:52:28.147186] I [socket.c:3561:socket_init] 0-glusterfs: SSL support is NOT enabled [2014-06-13 08:52:28.147237] I [socket.c:3576:socket_init] 0-glusterfs: using system polling thread [2014-06-13 08:52:28.148183] E [socket.c:2161:socket_connect_finish] 0-glusterfs: connection to 176.58.113.205:24007 failed (Connection refused) [2014-06-13 08:52:28.148236] E [glusterfsd-mgmt.c:1601:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: koraga (No data available) [2014-06-13 08:52:28.148251] I [glusterfsd-mgmt.c:1607:mgmt_rpc_notify] 0-glusterfsd-mgmt: Exhausted all volfile servers [2014-06-13 08:52:28.148477] W [glusterfsd.c:1095:cleanup_and_exit] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_transport_notify+0x27) [0x7fe077f8e0f7] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_clnt_notify+0x1a4) [0x7fe077f91cc4] (-->/usr/sbin/glusterfs(+0xcada) [0x7fe078655ada]))) 0-: received signum (1), shutting down [2014-06-13 08:52:28.148513] I [fuse-bridge.c:5444:fini] 0-fuse: Unmounting '/var/www/shared/private/uploads'. My fstab contains: proc /proc proc defaults 0 0 /dev/xvda / ext4 noatime,errors=remount-ro 0 1 /dev/xvdb none swap sw 0 0 /dev/xvdc /var/lib/glusterfs/brick01 ext4 defaults 1 2 koraga:/private_uploads /var/www/shared/private/uploads glusterfs defaults,_netdev 0 0 Any ideas what's going on and/or how to fix it?

  Read the article

• Can't get .htaccess to work

  - by orokusaki

  I'm using Apache2 on Ubuntu Lucid Lynx. I have config set to use .htaccess like normal. This is my default site: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> I've tried lower case "all" (AllowOverride all) as well. My .htaccess file looks like this: //Rewrite all requests to www Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^mydomain.com [nc] RewriteRule ^(.*)$ http://www.mydomain.com/$1 [r=301,nc] //301 Redirect "old_junk.html" File to "new_junk.html" Redirect 301 /old_junk.html /new_junk.html //301 Redirect Entire Directory "old_junk/" to "new_junk/" RedirectMatch 301 /old_junk/(.*) /new_junk//$1 // Copy and paste redirect examples from above: (with mydomain replaced with my actual domain... and my computer is plugged in)

  Read the article

• Installing GitBlit GO as Service in Ubuntu Server 14.04

  - by Luis Masuelli

  I downloaded it (version 1.6.0), unpacked it in /opt/gitblit (ubuntu server 14.04.1), configured http to 8280 and disabled https assigning 0 (I expose it by https using nginx). I created gitblit user and added it to 'sudo' group by running: sudo adduser gitblit sudo (gitblit user has a strong password). I installed it as a service by running: /opt/gitblit/install-service-ubuntu.sh. I tried to start it by running: sudo service gitblit start. The message Starting gitblit server appears. It's the only message. When I hit -in the same local machine- http://127.0.0.1:8280, the connection could not be made. When I run sudo netstat -anp | grep 8280, nothing appears. I see no error messages, but the server is not starting. Question: What am I missing?

  Read the article

• Unable to get prosody running on Ubuntu 10.04 (lua issues)

  - by user90374

  All this is performed on Ubuntu 10.04.4 LTS Server I installed LUA 5.1.4 following this procedure - http://ubuntuforums.org/showthread.php?t=1874860 I installed prosody following this command (after downloading the package) - sudo dpkg -i prosody_0.8.2-1_i386.deb After installation, I get the following error: I have tried to use as suggested luarock and sudo apt-get install to fix these. But still it keeps showing me these errors. Selecting previously deselected package prosody. (Reading database ... 59416 files and directories currently installed.) Unpacking prosody (from prosody_0.8.2-1_i386.deb) ... Setting up prosody (0.8.2-1) ... * Starting Prosody XMPP Server prosody ************** Prosody was unable to find luaexpat This package can be obtained in the following ways: Source: www[dot]keplerproject[dot]org/luaexpat/ Debian/Ubuntu: sudo apt-get install liblua5.1-expat0 luarocks: luarocks install luaexpat luaexpat is required for Prosody to run, so we will now exit. More help can be found on our website, at prosody[dot]im/doc/depends ************ Prosody was unable to find luasocket This package can be obtained in the following ways: Source: www[dot]tecgraf[dot]puc-rio[dot]br/~diego/professional/luasocket/ Debian/Ubuntu: sudo apt-get install liblua5.1-socket2 luarocks: luarocks install luasocket luasocket is required for Prosody to run, so we will now exit. More help can be found on our website, at prosody[dot]im/doc/depends ************ Prosody was unable to find LuaSec This package can be obtained in the following ways: Source: www[dot]inf[dot]puc-rio[dot]br/~brunoos/luasec/ Debian/Ubuntu: prosody[dot]im/download/start#debian_and_ubuntu luarocks: luarocks install luasec SSL/TLS support will not be available More help can be found on our website, at prosody[dot]im/doc/depends [fail] invoke-rc.d: initscript prosody, action "start" failed. dpkg: error processing prosody (--install): subprocess installed post-installation script returned error exit status 1 Processing triggers for man-db ... Processing triggers for ureadahead ... Errors were encountered while processing: prosody Thanks a lot for your patience and answers.

  Read the article

• My VPS host (rosehosting) sold me a domain name, but I can't get it to work

  - by Faisal Vali

  My VPS host (rosehosting) sold me a domain name, but I can’t get it to work. They sent me an email with the following (almost a month ago) DNS Servers (unless you ordered your own DNS servers): ns1.rosehosting.com (216.114.78.148) ns2.rosehosting.com (216.114.78.155) Operating System: Ubuntu 9.04 Domain Name: mytestdomainfv.com Host Name: mytestdomainfv.com IP Address: .... Physical Host Name: Vs####.rosehosting.com When I type in the Physical Host Name or the IP from a remote computer I get connected to my VPS. But when i type 'mytestdomainfv.com' the name is never resolved, and it has been a month now. I thought that they would configure it so that it would, but it seems that they haven't. Does anyone know how I can get 'mytestdomainfv.com' to point to my VPS? I looked at some of the other similar questions, but they talk about forwarding GoDaddy domain names - so I'm not sure if it applies - but then again, it might just be my naivete. Any direction will be greatly appreciated. Thanks! p.s mytestdomainfv.com is not the real domain name

  Read the article

• Ubuntu 12.04 - HP ProLiant DL380 G4 - Load Maxes Out / Unresponsive

  - by Brian S

  Trying to post this question on here. I've posted it on the Ubuntu forums as well with no replies. Recently I upgraded an HP ProLiant DL380 G4 server from Ubuntu 10.04 server to Ubuntu 12.04 server. Upon doing so, the server will not - at random times - get to a load of 400+ and then become completely non-responsive. I use an SNMP graphing program (cacti) and the load steadily increases by about 10 every five minutes until it gets over 400 and the graphing stops. The graphs may not be accurate, but the CPU load averages about 3% before this happens - and right when the load starts increasing, it jumps to about 25% for 15 minutes and dramatically dips down to less than 1% (about 0.3%) until the graphing stops. I'm not able to open a SSH tunnel to the server to do anything. I've checked the /var/log/syslog and all logging stops at that time as well - with nothing else in there. The odd thing is - the server still responds to DNS queries for the zones it is authoritative on during this time - and at normal speed. Just not sure what the next step would be in order to find out what is going on - and how this issue can be corrected. The server cannot stay with Ubuntu 10.04 Server and needs to stay upgraded.

  Read the article

• Pxe boot ubuntu server - corrupt packages

  - by Stu2000

  I have set up a cobbler pxe boot server and managed to get centos5.8 to fully automatically install. Unfortunately with Ubuntu 12.04-server-i386, it stops mid-way through with a message stating that packages are corrupt. I tried following this tip to unzip the Packages.gz file which results in an empty Packages file with nothing in it. Other people suggested doing a touch command which essentially does the exact same thing, an empty Packages file. That results in me getting a different message that states: Couldn't retrieve dists/precise/restricted/binary-i386/Packages. This may be due to a network..... Does anyone know how to work around this issue? Hitting continue before having made the tip/workaround resulted in ubuntu installing fine, but I need to be able to provide no manual input. Any advice appreciated, Stu

  Read the article

• Change the order of IP addresses returned by ifconfig?

  - by erikcw

  I have an Ubuntu server with several IP addresses attached to it. 127.0.0.1 is listed as venet0 by ifconfig. I'm using Chef to configure the server. The problem is that chef is listing 127.0.0.1 as the IP address for the server instead of one of the server's "real" IPs. (apparent "ohai ipaddress" uses the first IP listed by ifconfig to determine the server's IP). How can I change the order so the servers main IP is listed first instead of the 127.0.0.1? Can venet0 be deleted and venet0:0 be "promoted" to take its place since 127.0.0.1 is already listed in the "lo" interface? lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16700 (16.7 KB) TX bytes:16700 (16.7 KB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:7622207 errors:0 dropped:0 overruns:0 frame:0 TX packets:8183436 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2102750761 (2.1 GB) TX bytes:2795213667 (2.7 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX1 P-t-P:XXX.XXX.XXX.XX1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX2 P-t-P:XXX.XXX.XXX.XX2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 route -n route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 venet0 0.0.0.0 192.0.2.1 0.0.0.0 UG 0 0 0 venet0

  Read the article

• Permission forbidden on localhost with apache2

  - by N Alex

  Here is what I am trying to do. I tried to add another folder to apache and I get the following error when trying to acces testing/index.html. The idea is that I would like to have for every customer a folder like /home/neagoe/Work/InterWebs/Projects/[PROJECT NAME]/CustomerProjects/website/dist. Forbidden You don't have permission to access /index.html on this server. Apache/2.2.22 (Ubuntu) Server at testing Port 80 Here are the steps that I followed: Step1: sudo chmod a+x /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step2: sudo chown -R www-data:www-data /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist sudo chmod -R 775 /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step3: sudo adduser $USER www-data Step4: sudo a2enmod userdir Step5: sudo cp /etc/apache/sites-available/default /etc/apache/sites-available/testing I edited the file /etc/apache/sites-available/testing so it looks like this: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName testing DocumentRoot /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Step6: I edited hosts ("/etc/hosts") so it looks like this: 127.0.0.1 localhost 127.0.0.1 testing # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Step7: sudo a2ensite testing sudo service apache2 restart I searched for about 2 hours on the internet but I can't figure out what went wrong. All the pages that I found following the same steps as described above. I know there are similar questions here on the internet, but the answer is to change permission to the directory which I did on Step2. I am sorry if this is really a duplicate but I could't find the right answer. Thank you! PS. I asked this also on AskUbuntu but didn't get any answers so I'm trying my luck here. Edit: There isn't much on the error log or the access log. On the access.log: ::1 - - [10/Aug/2013:11:23:28 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:29 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:31 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:32 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:33 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:34 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:35 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:23:23 +0300] "POST /wordpress-testing/wp-cron.php?doing_wp_cron=1376123003.7026669979095458984375 HTTP/1.0" 200 705 "-" "WordPress/3.6; http://localhost/wordpress-testing" ::1 - - [10/Aug/2013:11:23:36 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:37 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:38 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:31:32 +0300] "GET /index.html HTTP/1.1" 200 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0" And the last line repeats for about 200 rows. On the error.log: 1. This lines repeat from time to time. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525 /msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:06:42 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations [Sat Aug 10 13:07:36 2013] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:07:37 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations 2. And this is the predominant error. (hundreds of lines) [Sat Aug 10 13:07:40 2013] [error] [client 127.0.0.1] (13)Permission denied: access to /index.html denied

  Read the article

• Setting up Tornado with Nginx on Ubuntu 10.04 for production use

  - by DjangoRocks

  Hi all, I understand that there's an nginx configuration file at http://www.friendfeed.com But i don't really know how to set up Tornada for production use on Ubuntu 10.04 with Nginx. Here's my situation and assumptions: 1) Assuming my Tornado project is set up as such: project/ src/ static/ templates/ project.py And I have installed Tornado by downloading the repositary from Github and than sudo python setup.py install 2) I've installed Nginx and started it based on the instructions here : http://library.linode.com/web-servers/nginx/installation/ubuntu-10.04-lucid My questions are: Where does my nginx configuration file go ? Within the src/ folder? After configuring Nginx, how do I start my Tornado project?

  Read the article

• Hardware issue, bsod with windows xp irq and strange messages with ubuntu

  - by JP Hellemons

  I have an old Acer T160 and it used to run Windows XP. But I keep getting random BSOD's. I keep seeing IRQ conflicts. I tried to run ubuntu, which runs and keeps running. But sometimes is not responding. Also there are these popups at ubuntu 12.04 that my network cable (which is onboard) is unplugged. But I have no cable in it! and have an usb dongle for wifi. which also seems unstable. have to (auto)reconnect sometimes. So my question is: is it my mobo, power supply or something else? FYI: I had an dvd-rw station which did not open properly, so unplugged the ata and power, als removed the second harddrive. now only have sata harddrive. also removed the extra video card (ati sapphire x1600 pro) so use only onboard video now and still have these issues. EDIT Update: will try with a new PSU (power supply unit of 400watt) the old (factory) one was 300watt. and will use a usb drive which has 12.04 ubuntu on it (made with unetbootin) to format everything and re-install ubuntu. (so also delete mbr partition) will update the day after tomorrow.

  Read the article

• I would like to edit the layout of my keyboard just a bit - what's the best way?

  - by Codemonkey

  I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: http://askubuntu.com/q/24916/52719) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >