Search Results

Search found 11306 results on 453 pages for 'methods'.

Page 400/453 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

• Partition Wise Joins

  - by jean-pierre.dijcks

  Some say they are the holy grail of parallel computing and PWJ is the basis for a shared nothing system and the only join method that is available on a shared nothing system (yes this is oversimplified!). The magic in Oracle is of course that is one of many ways to join data. And yes, this is the old flexibility vs. simplicity discussion all over, so I won't go there... the point is that what you must do in a shared nothing system, you can do in Oracle with the same speed and methods. The Theory A partition wise join is a join between (for simplicity) two tables that are partitioned on the same column with the same partitioning scheme. In shared nothing this is effectively hard partitioning locating data on a specific node / storage combo. In Oracle is is logical partitioning. If you now join the two tables on that partitioned column you can break up the join in smaller joins exactly along the partitions in the data. Since they are partitioned (grouped) into the same buckets, all values required to do the join live in the equivalent bucket on either sides. No need to talk to anyone else, no need to redistribute data to anyone else... in short, the optimal join method for parallel processing of two large data sets. PWJ's in Oracle Since we do not hard partition the data across nodes in Oracle we use the Partitioning option to the database to create the buckets, then set the Degree of Parallelism (or run Auto DOP - see here) and get our PWJs. The main questions always asked are: How many partitions should I create? What should my DOP be? In a shared nothing system the answer is of course, as many partitions as there are nodes which will be your DOP. In Oracle we do want you to look at the workload and concurrency, and once you know that to understand the following rules of thumb. Within Oracle we have more ways of joining of data, so it is important to understand some of the PWJ ideas and what it means if you have an uneven distribution across processes. Assume we have a simple scenario where we partition the data on a hash key resulting in 4 hash partitions (H1 -H4). We have 2 parallel processes that have been tasked with reading these partitions (P1 - P2). The work is evenly divided assuming the partitions are the same size and we can scan this in time t1 as shown below. Now assume that we have changed the system and have a 5th partition but still have our 2 workers P1 and P2. The time it takes is actually 50% more assuming the 5th partition has the same size as the original H1 - H4 partitions. In other words to scan these 5 partitions, the time t2 it takes is not 1/5th more expensive, it is a lot more expensive and some other join plans may now start to look exciting to the optimizer. Just to post the disclaimer, it is not as simple as I state it here, but you get the idea on how much more expensive this plan may now look... Based on this little example there are a few rules of thumb to follow to get the partition wise joins. First, choose a DOP that is a factor of two (2). So always choose something like 2, 4, 8, 16, 32 and so on... Second, choose a number of partitions that is larger or equal to 2* DOP. Third, make sure the number of partitions is divisible through 2 without orphans. This is also known as an even number... Fourth, choose a stable partition count strategy, which is typically hash, which can be a sub partitioning strategy rather than the main strategy (range - hash is a popular one). Fifth, make sure you do this on the join key between the two large tables you want to join (and this should be the obvious one...). Translating this into an example: DOP = 8 (determined based on concurrency or by using Auto DOP with a cap due to concurrency) says that the number of partitions >= 16. Number of hash (sub) partitions = 32, which gives each process four partitions to work on. This number is somewhat arbitrary and depends on your data and system. In this case my main reasoning is that if you get more room on the box you can easily move the DOP for the query to 16 without repartitioning... and of course it makes for no leftovers on the table... And yes, we recommend up-to-date statistics. And before you start complaining, do read this post on a cool way to do stats in 11.

  Read the article

• Handling Trailing Delimiters in HL7 Messages

  - by Thomas Canter

  Applies to: BizTalk Server 2006 with the HL7 1.3 Accelerator Outline of the problem Trailing Delimiters are empty values at the end of an object in a HL7 ER7 formatted message. Examples: Empty Field NTE|P| NTE|P|| Empty component ORC|1|725^ Empty Subcomponent ORC|1|||||27& Empty repeat OBR|1||||||||027~ Trailing delimiters indicate the following object exists and is empty, which is quite different from null, null is an explicit value indicated by a pair of double quotes -> "". The BizTalk HL7 Accelerator by default does not allow trailing delimiters. There are three methods to allow trailing delimiters. NOTE: All Schemas always allow trailing delimiters in the MSH Segment Using party identifiers MSH3.1 – Receive/inbound processing, using this value as a party allows you to configure the system to allow inbound trailing delimiters. MSH5.1 – Send/outbound processing, using this value as a party allows you to configure the system to allow outbound trailing delimiters. Generally, if you allow inbound trailing delimiters, unless you are willing to programmatically remove all trailing delimiters, then you need to configure the send to allow trailing delimiters. Add the appropriate parties to the BizTalk Parties list from these two fields in your message stream. Open the BizTalk HL7 Configuration tool and for each party check the "Allow trailing delimiters (separators)" check box on the Validation tab. Disadvantage – Each MSH3.1 and MSH5.1 value must be represented in the parties list and configured. Advantage – granular control over system behavior for each inbound/outbound system. Using instance properties of a pipeline used in a send port or receive location. Open the BizTalk Server Administration console locate the send port or receive location that contains the BTAHL72XReceivePipeline or BTAHL72XSendPipeline pipeline. Open the properties To the right of the pipeline selected locate the […] ellipses button In the property list, locate the "TrailingDelimiterAllowed" property and set it to True. Advantage – All messages through a particular Send Port or Receive Location will allow trailing delimiters. Disadvantage – Must configure each Send Port or Receive Location. No granular control over which remote parties will send or receive messages with trailing delimiters. Using a custom pipeline that uses a pre-configured BTA HL7 Pipeline component. Use Visual Studio to construct a custom receive and send pipeline using the appropriate assembler or dissasembler. Set the component property to "TrailingDelimitersAllowed" to True Compile and deploy the custom pipeline Use the custom pipeline instead of the standard pipeline for all HL7 message processing Advantage – All messages using the custom pipeline will automatically allow trailing delimiters. Disadvantage – Requires custom coding and development to create and deploy the custom pipeline. No granular control over which remote parties will send or receive messages with trailing delimiters. What does a Trailing Delimiter do to the XML Schema? Allowing trailing delimiters does not have the impact often expected in the actual XML Schema.The Schema reproduces the message with no data loss.Thus, the message when represented in XML must contain the extra fields, in order to reproduce the outbound message.Thus, a trialing delimiter results in an empty XML field.Trailing Delmiters are not stripped from the inbound message. Example:<PID_21>44172</PID_21><PID_21>9257</PID_21> -> the original maximum number of repeats<PID_21></PID_21> -> The empty repeated field Allowing trailing delimiters not remove the trailing delimiters from the message, it simply suppresses the check that will cause the message to fail parse with trailing delimiters. When can you not fix the problem by enabling trailing delimiters Each object in a message must have a location in the target BTAHL7 schema for its content to reside.If you have more objects in the message than are contained at that location, then enabling trailing delimiters will not resolve the problem. The schema must be extended to accommodate the empty message content.Examples: Extra Field NTE|P||||Only 4 fields in NTE Segment, the 4th field exists, but is empty. Extra component PID|1|1523|47^^^^^^^Only 5 components in a CX data type, the 5th component exists, but is empty Extra subcomponent ORC|1|||||27&&Only 2 subcomponents in a CQ data type, the 3rd subcomponent is empty, but exists. Extra Repeat PID|1||||||||||||||||||||4419~5217~Only 2 repeats allowed for the field "Mother's identifier", the repeat is empty, but exists. In each of these cases, you must locate the failing object and extend the type to allow an additional object of that type. FieldAdd a field of ST to the end of the segment with a suitable name in the segments_nnn.xsd Component Create a new Custom CX data type (i.e. CX_XtraComp) in the datatypes_nnn.xsd and add a new component to the custom CX data type. Update the field in the segments_nnn.xsd file to use the custom data type instead of the standard datatype. Subcomponent Create a new Custom CQ data type that accepts an additional TS value at the end of the data type. Create a custom TQ data type that uses the new custom CQ data type as the first subcomponent. Modify the ORC segment to use the new CQ data type at ORC.7 instead of the standard CQ data type. RepeatModify the Field definition for PID.21 in the segments_nnn.xsd to allow more repeats in the field.

  Read the article

• How to propagate http response code from back-end to client

  - by Manoj Neelapu

  Oracle service bus can be used as for pass through casses. Some use cases require propagating the http-response code back to the caller. http://forums.oracle.com/forums/thread.jspa?messageID=4326052&#4326052 is one such example we will try to accomplish in this tutorial.We will try to demonstrate this feature using Oracle Service Bus (11.1.1.3.0. We will also use commons-logging-1.1.1, httpcomponents-client-4.0.1, httpcomponents-core-4.0.1 for writing the client to demonstrate.First we create a simple JSP which will always set response code to 304.The JSP snippet will look like <%@ page language="java"     contentType="text/xml;     charset=UTF-8"        pageEncoding="UTF-8" %><%      System.out.println("Servlet setting Responsecode=304");    response.setStatus(304);    response.flushBuffer();%>We will now deploy this JSP on weblogic server with URI=http://localhost:7021/reponsecode/For this JSP we will create a simple Any XML BS We will also create proxy service as shown below Once the proxy is created we configure pipeline for the proxy to use route node, which invokes the BS(JSPCaller) created in the first place. So now we will create a error handler for route node and will add a stage. When a HTTP BS sends a request, the JSP sends the response back. If the response code is not 200, then the http BS will consider that as error and the above configured error handler is invoked. We will print $outbound to show the response code sent by the JSP. The next actions. To test this I had create a simple clientimport org.apache.http.Header;import org.apache.http.HttpEntity;import org.apache.http.HttpHost;import org.apache.http.HttpResponse;import org.apache.http.HttpVersion;import org.apache.http.client.methods.HttpGet;import org.apache.http.conn.ClientConnectionManager;import org.apache.http.conn.scheme.PlainSocketFactory;import org.apache.http.conn.scheme.Scheme;import org.apache.http.conn.scheme.SchemeRegistry;import org.apache.http.impl.client.DefaultHttpClient;import org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager;import org.apache.http.params.BasicHttpParams;import org.apache.http.params.HttpParams;import org.apache.http.params.HttpProtocolParams;import org.apache.http.util.EntityUtils;/** * @author MNEELAPU * */public class TestProxy304{    public static void main(String arg[]) throws Exception{     HttpHost target = new HttpHost("localhost", 7021, "http");     // general setup     SchemeRegistry supportedSchemes = new SchemeRegistry();     // Register the "http" protocol scheme, it is required     // by the default operator to look up socket factories.     supportedSchemes.register(new Scheme("http",              PlainSocketFactory.getSocketFactory(), 7021));     // prepare parameters     HttpParams params = new BasicHttpParams();     HttpProtocolParams.setVersion(params, HttpVersion.HTTP_1_1);     HttpProtocolParams.setContentCharset(params, "UTF-8");     HttpProtocolParams.setUseExpectContinue(params, true);     ClientConnectionManager connMgr = new ThreadSafeClientConnManager(params,              supportedSchemes);     DefaultHttpClient httpclient = new DefaultHttpClient(connMgr, params);     HttpGet req = new HttpGet("/HttpResponseCode/ProxyExposed");     System.out.println("executing request to " + target);     HttpResponse rsp = httpclient.execute(target, req);     HttpEntity entity = rsp.getEntity();     System.out.println("----------------------------------------");     System.out.println(rsp.getStatusLine());     Header[] headers = rsp.getAllHeaders();     for (int i = 0; i < headers.length; i++) {         System.out.println(headers[i]);     }     System.out.println("----------------------------------------");     if (entity != null) {         System.out.println(EntityUtils.toString(entity));     }     // When HttpClient instance is no longer needed,      // shut down the connection manager to ensure     // immediate deallocation of all system resources     httpclient.getConnectionManager().shutdown();     }}On compiling and executing this we see the below output in STDOUT which clearly indicates the response code was propagated from Business Service to Proxy serviceexecuting request to http://localhost:7021----------------------------------------HTTP/1.1 304 Not ModifiedDate: Tue, 08 Jun 2010 16:13:42 GMTContent-Type: text/xml; charset=UTF-8X-Powered-By: Servlet/2.5 JSP/2.1----------------------------------------  

  Read the article

• Measuring Usability with Common Industry Format (CIF) Usability Tests

  - by Applications User Experience

  Sean Rice, Manager, Applications User Experience A User-centered Research and Design Process The Oracle Fusion Applications user experience was five years in the making. The development of this suite included an extensive and comprehensive user experience design process: ethnographic research, low-fidelity workflow prototyping, high fidelity user interface (UI) prototyping, iterative formative usability testing, development feedback and iteration, and sales and customer evaluation throughout the design cycle. However, this process does not stop when our products are released. We conduct summative usability testing using the ISO 25062 Common Industry Format (CIF) for usability test reports as an organizational framework. CIF tests allow us to measure the overall usability of our released products.  These studies provide benchmarks that allow for comparisons of a specific product release against previous versions of our product and against other products in the marketplace. What Is a CIF Usability Test? CIF refers to the internationally standardized method for reporting usability test findings used by the software industry. The CIF is based on a formal, lab-based test that is used to benchmark the usability of a product in terms of human performance and subjective data. The CIF was developed and is endorsed by more than 375 software customer and vendor organizations led by the National Institute for Standards and Technology (NIST), a US government entity. NIST sponsored the CIF through the American National Standards Institute (ANSI) and International Organization for Standardization (ISO) standards-making processes. Oracle played a key role in developing the CIF. The CIF report format and metrics are consistent with the ISO 9241-11 definition of usability: “The extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use.” Our goal in conducting CIF tests is to measure performance and satisfaction of a representative sample of users on a set of core tasks and to help predict how usable a product will be with the larger population of customers. Why Do We Perform CIF Testing? The overarching purpose of the CIF for usability test reports is to promote incorporation of usability as part of the procurement decision-making process for interactive products. CIF provides a common format for vendors to report the methods and results of usability tests to customer organizations, and enables customers to compare the usability of our software to that of other suppliers. CIF also enables us to compare our current software with previous versions of our software. CIF Testing for Fusion Applications Oracle Fusion Applications comprises more than 100 modules in seven different product families. These modules encompass more than 400 task flows and 400 user roles. Due to resource constraints, we cannot perform comprehensive CIF testing across the entire product suite. Therefore, we had to develop meaningful inclusion criteria and work with other stakeholders across the applications development organization to prioritize product areas for testing. Ultimately, we want to test the product areas for which customers might be most interested in seeing CIF data. We also want to build credibility with customers; we need to be able to make the case to current and prospective customers that the product areas tested are representative of the product suite as a whole. Our goal is to test the top use cases for each product. The primary activity in the scoping process was to work with the individual product teams to identify the key products and business process task flows in each product to test. We prioritized these products and flows through a series of negotiations among the user experience managers, product strategy, and product management directors for each of the primary product families within the Oracle Fusion Applications suite (Human Capital Management, Supply Chain Management, Customer Relationship Management, Financials, Projects, and Procurement). The end result of the scoping exercise was a list of 47 proposed CIF tests for the Fusion Applications product suite.  Figure 1. A participant completes tasks during a usability test in Oracle’s Usability Labs Fusion Supplier Portal CIF Test The first Fusion CIF test was completed on the Supplier Portal application in July of 2011.  Fusion Supplier Portal is part of an integrated suite of Procurement applications that helps supplier companies manage orders, schedules, shipments, invoices, negotiations and payments. The user roles targeted for the usability study were Supplier Account Receivables Specialists and Supplier Sales Representatives, including both experienced and inexperienced users across a wide demographic range.  The test specifically focused on the following functionality and features: Manage payments – view payments Manage invoices – view invoice status and create invoices Manage account information – create new contact, review bank account information Manage agreements – find and view agreement, upload agreement lines, confirm status of agreement lines upload Manage purchase orders (PO) – view history of PO, request change to PO, find orders Manage negotiations – respond to request for a quote, check the status of a negotiation response These product areas were selected to represent the most important subset of features and functionality of the flow, in terms of frequency and criticality of use by customers. A total of 20 users participated in the usability study. The results of the Supplier Portal evaluation were favorable and exceeded our expectations. Figure 2. Fusion Supplier Portal Next Studies We plan to conduct two Fusion CIF usability studies per product family over the next nine months. The next product to be tested will be Self-service Procurement. End users are currently being recruited to participate in this usability study, and the test sessions are scheduled to begin during the last week of November.

  Read the article

• Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

  - by terje

  Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled.  To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that.   However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code.  If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks.   I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post.  When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate.  Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset  (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check.   Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds.   Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build   In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”.     The ruleset checks The following list is the essential and critical memory checks.  CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No  http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else  http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No  http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No  http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description  http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level  http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level  http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources  http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No  http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash   The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set.   ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx   Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones.  All three rulesets can be found in the  zip archive  “Inmeta.Memorycheck” downloadable from here.   Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN :  Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

  Read the article

• Oracle Fusion Middleware Innovation Award Winners 2012: ADF & Fusion Development

  - by Dana Singleterry

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Fusion Middleware Innovation Awards honor customers for their cutting-edge solutions using Oracle Fusion Middleware. Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. The awards were presented during Oracle OpenWorld 2012 and following winners are for the category of ADF & Fusion Development. Micros – an OPN Platinum partner – has been working closely with Oracle product management teams in applying industry best practices in the development of their solutions. Their current application suite for the hospitality industry was built on Oracle Forms and the Oracle database running on MS Windows. The next generation of this suite is being developed and released in modules that are now based on Oracle FMW (including ADF) 11g technologies and Oracle Database 11g all running on Oracle Linux. The primary driver was that of modernization and hence the reason Oracle ADF was selected to provide a rich UI for business processes that could be served up through traditional methods or through mobile devices globally. SOA Suite & ADF allowed for loosely-coupled services that could evolve with the needs of the business. Micros's application innovations includes the use of business application portlets that have been published from ADF Faces Task Flows generated using WebCenter portlet libraries  & Oracle Metadata Services (MDS) with multi-layered customizations using Oracle WebCenter Composer. PCS (Marfin Egnatia Bank of Greece) – PCS Wealth Management is a WM Software Solution, which captures and automates the WM business processes allowing Service Providers to allocate enough time and effort into Customer Service and Investment Strategies, under Advisory or Execution-Only Services. The Product is built upon the latest Web Technologies and ensures Best Practices covering all functional expectations, meeting local regulatory requirements and discovering successful opportunities for the WM Customers' Portfolios. The new unified Wealth Management system offers an unparalleled User Interface taking full advantage of the user friendly ADF Faces Components to a great extent, all serving Private Banking purposes. The application offers a true Account Officer Cockpit with shallow navigation, one-click access to informed decisions and a perfect customer service. ADF Grids and Pivots, the Data Visualization Components, as well as the Calendar and Map Components are cleverly used to help the user eliminate the usage of Excel, Outlook and other systems. PCS's application is unique in the way it leverages the ADF Faces data visualization components to create a truly attractive and insightful dashboard for their application. PCS Wealth Management Demo Qualcomm – Qualcomm, a $17B per year company, designs and sells semiconductor products for wireless telecommunications, mobile and computing markets. In addition, Qualcomm companies provide various hardware and software products to facilitate the design, development and deployment of phones and the applications that run on them. Qualcomm’s challenge has been to not only develop and deploy new business system functions to keep pace with customer demand, but also to provide a customer collaboration capability that is sufficiently robust, easy to use, and flexible to meet emerging and future needs. Qualcomm has taken successful steps in building and deploying the customer engagement platform Ieveraging various Oracle technologies including Fusion Middleware (ADF, SOA, OBIEE) and their proven ERP foundation of EBS and 11g databases. The new platform delivers a more unified and “seamless” business solution with a consistent, modern “look and feel” all based on standard business processes which facilitate efficient collaboration with Qualcomm and its customers. The look and feel leverages ADF in innovative ways and includes hover over navigation, custom pagination components, and skinning. Qualcomm has exposed a services layer that provides significant functionality including order-to-ship, quote-to-order, customer on-boarding and contract validation. Qualcomm's creative designs leverage Oracle's SOA Suite to integrate with Oracle EBS and desperate applications to provide a rich user interface through the use use of Oracle ADF Faces Rich Client Components providing a self-service solution to their customers.

  Read the article

• Integrating Code Metrics in TFS 2010 Build

  - by Jakob Ehn

  The build process template and custom activity described in this post is available here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/CodeMetricsSample.zip Running code metrics has been available since VS 2008, but only from inside the IDE. Yesterday Microsoft finally releases a Visual Studio Code Metrics Power Tool 10.0, a command line tool that lets you run code metrics on your applications.  This means that it is now possible to perform code metrics analysis on the build server as part of your nightly/QA builds (for example). In this post I will show how you can run the metrics command line tool, and also a custom activity that reads the output and appends the results to the build log, and also fails he build if the metric values exceeds certain (configurable) treshold values. The code metrics tool analyzes all the methods in the assemblies, measuring cyclomatic complexity, class coupling, depth of inheritance and lines of code. Then it calculates a Maintainability Index from these values that is a measure f how maintanable this method is, between 0 (worst) and 100 (best). For information on hwo this value is calculated, see http://blogs.msdn.com/b/codeanalysis/archive/2007/11/20/maintainability-index-range-and-meaning.aspx. After this it aggregates the information and present it at the class, namespace and module level as well. Running Metrics.exe in a build definition Running the actual tool is easy, just use a InvokeProcess activity last in the Compile the Project sequence, reference the metrics.exe file and pass the correct arguments and you will end up with a result XML file in the drop directory. Here is how it is done in the attached build process template: In the above sequence I first assign the path to the code metrics result file ([BinariesDirectory]\result.xml) to a variable called MetricsResultFile, which is then sent to the InvokeProcess activity in the Arguments property. Here are the arguments for the InvokeProcess activity: Note that we tell metrics.exe to analyze all assemblies located in the Binaries folder. You might want to do some more intelligent filtering here, you probably don’t want to analyze all 3rd party assemblies for example. Note also the path to the metrics.exe, this is the default location when you install the Code Metrics power tool. You must of course install the power tool on all build servers. Using the standard output logging (in the Handle Standard Output/Handle Error Output sections), we get the following output when running the build: Integrating Code Metrics into the build Having the results available next to the build result is nice, but we want to have results integrated in the build result itself, and also to affect the outcome of the build. The point of having QA builds that measure, for example, code metrics is to make it very clear how the code being built measures up to the standards of the project/company. Just having a XML file available in the drop location will not cause the developers to improve their code, but a (partially) failing build will! To do this, we need to write a custom activity that parses the metrics result file, logs it to the build log and fails the build if the values frfom the metrics is below/above some predefined treshold values. The custom activity performs the following steps Parses the XML. I’m using Linq 2 XSD for this, since the XML schema for the result file is available, it is vey easy to generate code that lets you query the structure using standard Linq operators. Runs through the metric result hierarchy and logs the metrics for each level and also verifies maintainability index and the cyclomatic complexity with the treshold values. The treshold values are defined in the build process template are are sent in as arguments to the custom activity If the treshold values are exceeded, the activity either fails or partially fails the current build. For more information about the structure of the code metrics result file, read Cameron Skinner's post about it. It is very simpe and easy to understand. I won’t go through the code of the custom activity here, since there is nothing special about it and it is available for download so you can look at it and play with it yourself. The treshold values for Maintainability Index and Cyclomatic Complexity is defined in the build process template, and can be modified per build definition: I have taken the default value for these settings from my colleague Terje Sandström post on Code Metrics - suggestions for approriate limits. You’ll notice that this is quite an improvement compared to using code metrics inside the IDE, where Red/Yellow/Green limits are fixed (and the default values are somewaht strange, see Terjes post for a discussion on this) This is the first version of the code metrics integration with TFS 2010 Build, I will proabably enhance the functionality and the logging (the “tree view” structure in the log becomes quite hard to read) soon. I will also consider adding it to the Community TFS Build Extensions site when it becomes a bit more mature. Another obvious improvement is to extend the data warehouse of TFS and push the metric results back to the warehouse and make it visible in the reports.

  Read the article

• Find only physical network adapters with WMI Win32_NetworkAdapter class

  - by Mladen Prajdic

  WMI is Windows Management Instrumentation infrastructure for managing data and machines. We can access it by using WQL (WMI querying language or SQL for WMI). One thing to remember from the WQL link is that it doesn't support ORDER BY. This means that when you do SELECT * FROM wmiObject, the returned order of the objects is not guaranteed. It can return adapters in different order based on logged-in user, permissions of that user, etc… This is not documented anywhere that I've looked and is derived just from my observations. To get network adapters we have to query the Win32_NetworkAdapter class. This returns us all network adapters that windows detect, real and virtual ones, however it only supplies IPv4 data. I've tried various methods of combining properties that are common on all systems since Windows XP. The first thing to do to remove all virtual adapters (like tunneling, WAN miniports, etc…) created by Microsoft. We do this by adding WHERE Manufacturer!='Microsoft' to our WMI query. This greatly narrows the number of adapters we have to work with. Just on my machine it went from 20 adapters to 5. What was left were one real physical Realtek LAN adapter, 2 virtual adapters installed by VMware and 2 virtual adapters installed by VirtualBox. If you read the Win32_NetworkAdapter help page you'd notice that there's an AdapterType that enumerates various adapter types like LAN or Wireless and AdapterTypeID that gives you the same information as AdapterType only in integer form. The dirty little secret is that these 2 properties don't work. They are both hardcoded, AdapterTypeID to "0" and AdapterType to "Ethernet 802.3". The only exceptions I've seen so far are adapters that have no values at all for the two properties, "RAS Async Adapter" that has values of AdapterType = "Wide Area Network" and AdapterTypeID = "3" and various tunneling adapters that have values of AdapterType = "Tunnel" and AdapterTypeID = "15". In the help docs there isn't even a value for 15. So this property was of no help. Next property to give hope is NetConnectionId. This is the name of the network connection as it appears in the Control Panel -> Network Connections. Problem is this value is also localized into various languages and can have different names for different connection. So both of these properties don't help and we haven't even started talking about eliminating virtual adapters. Same as the previous one this property was also of no help. Next two properties I checked were ConfigManagerErrorCode and NetConnectionStatus in hopes of finding disabled and disconnected adapters. If an adapter is enabled but disconnected the ConfigManagerErrorCode = 0 with different NetConnectionStatus. If the adapter is disabled it reports ConfigManagerErrorCode = 22. This looked like a win by using (ConfigManagerErrorCode=0 or ConfigManagerErrorCode=22) in our condition. This way we get enabled (connected and disconnected adapters). Problem with all of the above properties is that none of them filter out the virtual adapters installed by virtualization software like VMware and VirtualBox. The last property to give hope is PNPDeviceID. There's an interesting observation about physical and virtual adapters with this property. Every virtual adapter PNPDeviceID starts with "ROOT\". Even VMware and VirtualBox ones. There were some really, really old physical adapters that had PNPDeviceID starting with "ROOT\" but those were in pre win XP era AFAIK. Since my minimum system to check was Windows XP SP2 I didn't have to worry about those. The only virtual adapter I've seen to not have PNPDeviceID start with "ROOT\" is the RAS Async Adapter for Wide Area Network. But because it is made by Microsoft we've eliminated it with the first condition for the manufacturer. Using the PNPDeviceID has so far proven to be really effective and I've tested it on over 20 different computers of various configurations from Windows XP laptops with wireless and bluetooth cards to virtualized Windows 2008 R2 servers. So far it always worked as expected. I will appreciate you letting me know if you find a configuration where it doesn't work. Let's see some C# code how to do this: ManagementObjectSearcher mos = null;// WHERE Manufacturer!='Microsoft' removes all of the // Microsoft provided virtual adapters like tunneling, miniports, and Wide Area Network adapters.mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft'");// Trying the ConfigManagerErrorCode and NetConnectionStatus variations // proved to still not be enough and it returns adapters installed by // the virtualization software like VMWare and VirtualBox// ConfigManagerErrorCode = 0 -> Device is working properly. This covers enabled and/or disconnected devices// ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0 -> Device is disabled and Disconnected. // Some virtual devices report ConfigManagerErrorCode = 22 (disabled) and some other NetConnectionStatus than 0mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND (ConfigManagerErrorCode = 0 OR (ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0))");// Final solution with filtering on the Manufacturer and PNPDeviceID not starting with "ROOT\"// Physical devices have PNPDeviceID starting with "PCI\" or something else besides "ROOT\"mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND NOT PNPDeviceID LIKE 'ROOT\\%'");// Get the physical adapters and sort them by their index. // This is needed because they're not sorted by defaultIList<ManagementObject> managementObjectList = mos.Get() .Cast<ManagementObject>() .OrderBy(p => Convert.ToUInt32(p.Properties["Index"].Value)) .ToList();// Let's just show all the properties for all physical adapters.foreach (ManagementObject mo in managementObjectList){ foreach (PropertyData pd in mo.Properties) Console.WriteLine(pd.Name + ": " + (pd.Value ?? "N/A"));}   That's it. Hope this helps you in some way.

  Read the article

• Passing the CAML thru the EY of the NEEDL

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Passing the CAML thru the EY of the NEEDL Definitions: CAML (Collaborative Application Markup Language) is an XML based markup language used in Microsoft SharePoint technologies  Anonymous: A camel is a horse designed by committee  Dov Trietsch: A CAML is a HORS designed by Microsoft  I was advised against putting any Camel and Sphinx rhymes in here. Look it up in Google!  _____ Now that we have dispensed with the dromedary jokes (BTW, I have many more, but they are not fit to print!), here is an interesting problem and its solution.  We have built a list where the title must be kept unique so I needed to verify the existence (or absence) of a list item with a particular title. Two methods came to mind:  1: Span the list until the title is found (result = found) or until the list ends (result = not found). This is an algorithm of complexity O(N) and for long lists it is a performance sucker. 2: Use a CAML query instead. Here, for short list we’ll encounter some overhead, but because the query results in an SQL query on the content database, it is of complexity O(LogN), which is significantly better and scales perfectly. Obviously I decided to go with the latter and this is where the CAML s--t hit the fan.   A CAML query returns a SPListItemCollection and I simply checked its Count. If it was 0, the item did not already exist and it was safe to add a new item with the given title. Otherwise I cancelled the operation and warned the user. The trouble was that I always got a positive. Most of the time a false positive. The count was greater than 0 regardles of the title I checked (except when the list was empty, which happens only once). This was very disturbing indeed. To solve my immediate problem which was speedy delivery, I reverted to the “Span the list” approach, but the problem bugged me, so I wrote a little console app by which I tested and tweaked and tested, time and again, until I found the solution. Yes, one can pass the proverbial CAML thru the ey of the needle (e’s missing on purpose).  So here are my conclusions:  CAML that does not work:  Note: QT is my quote:  char QT = Convert.ToChar((int)34); string titleQuery = "<Query>><Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where></Query>"; titleQuery += "<ViewFields><FieldRef Name=" + QT + "Title" + QT + "/></ViewFields>";  Why? Even though U2U generates it, the <Query> and </Query> tags do not belong in the query that you pass. Start your query with the <Where> clause.  Also the <ViewFiels> clause does not belong. I used this clause to limit the returned collection to a single column, and I still wish to do it. I’ll show how this is done a bit later.   When you use the <Query> </Query> tags in you query, it’s as if you did not specify the query at all. What you get is the all inclusive default query for the list. It returns evey column and every item. It is expensive for both server and network because it does all the extra processing and eats plenty of bandwidth.   Now, here is the CAML that works  string titleQuery = "<Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where>";  You’ll also notice that inside the unusable <ViewFields> clause above, we have a <FieldRef> clause. This is what we pass to the SPQuery object. Here is how:  SPQuery query = new SPQuery(); query.Query = titleQuery; query.ViewFields = "<FieldRef Name=" + QT + "Title" + QT + "/>"; query.RowLimit = 1; SPListItemCollection col = masterList.GetItems(query);  Two thing to note: we enter the view fields into the SPQuery object and we also limited the number of rows that the query returns. The latter is not always done, but in an existence test, there is no point in returning hundreds of rows. The query will now return one item or none, which is all we need in order to verify the existence (or non-existence) of items. Limiting the number of columns and the number of rows is a great performance enhancer. That’s all folks!!

  Read the article

• Entity Framework Batch Update and Future Queries

  - by pwelter34

  Entity Framework Extended Library A library the extends the functionality of Entity Framework. Features Batch Update and Delete Future Queries Audit Log Project Package and Source NuGet Package PM> Install-Package EntityFramework.Extended NuGet: http://nuget.org/List/Packages/EntityFramework.Extended Source: http://github.com/loresoft/EntityFramework.Extended Batch Update and Delete A current limitations of the Entity Framework is that in order to update or delete an entity you have to first retrieve it into memory. Now in most scenarios this is just fine. There are however some senerios where performance would suffer. Also, for single deletes, the object must be retrieved before it can be deleted requiring two calls to the database. Batch update and delete eliminates the need to retrieve and load an entity before modifying it. Deleting //delete all users where FirstName matches context.Users.Delete(u => u.FirstName == "firstname"); Update //update all tasks with status of 1 to status of 2 context.Tasks.Update( t => t.StatusId == 1, t => new Task {StatusId = 2}); //example of using an IQueryable as the filter for the update var users = context.Users .Where(u => u.FirstName == "firstname"); context.Users.Update( users, u => new User {FirstName = "newfirstname"}); Future Queries Build up a list of queries for the data that you need and the first time any of the results are accessed, all the data will retrieved in one round trip to the database server. Reducing the number of trips to the database is a great. Using this feature is as simple as appending .Future() to the end of your queries. To use the Future Queries, make sure to import the EntityFramework.Extensions namespace. Future queries are created with the following extension methods... Future() FutureFirstOrDefault() FutureCount() Sample // build up queries var q1 = db.Users .Where(t => t.EmailAddress == "[email protected]") .Future(); var q2 = db.Tasks .Where(t => t.Summary == "Test") .Future(); // this triggers the loading of all the future queries var users = q1.ToList(); In the example above, there are 2 queries built up, as soon as one of the queries is enumerated, it triggers the batch load of both queries. // base query var q = db.Tasks.Where(t => t.Priority == 2); // get total count var q1 = q.FutureCount(); // get page var q2 = q.Skip(pageIndex).Take(pageSize).Future(); // triggers execute as a batch int total = q1.Value; var tasks = q2.ToList(); In this example, we have a common senerio where you want to page a list of tasks. In order for the GUI to setup the paging control, you need a total count. With Future, we can batch together the queries to get all the data in one database call. Future queries work by creating the appropriate IFutureQuery object that keeps the IQuerable. The IFutureQuery object is then stored in IFutureContext.FutureQueries list. Then, when one of the IFutureQuery objects is enumerated, it calls back to IFutureContext.ExecuteFutureQueries() via the LoadAction delegate. ExecuteFutureQueries builds a batch query from all the stored IFutureQuery objects. Finally, all the IFutureQuery objects are updated with the results from the query. Audit Log The Audit Log feature will capture the changes to entities anytime they are submitted to the database. The Audit Log captures only the entities that are changed and only the properties on those entities that were changed. The before and after values are recorded. AuditLogger.LastAudit is where this information is held and there is a ToXml() method that makes it easy to turn the AuditLog into xml for easy storage. The AuditLog can be customized via attributes on the entities or via a Fluent Configuration API. Fluent Configuration // config audit when your application is starting up... var auditConfiguration = AuditConfiguration.Default; auditConfiguration.IncludeRelationships = true; auditConfiguration.LoadRelationships = true; auditConfiguration.DefaultAuditable = true; // customize the audit for Task entity auditConfiguration.IsAuditable<Task>() .NotAudited(t => t.TaskExtended) .FormatWith(t => t.Status, v => FormatStatus(v)); // set the display member when status is a foreign key auditConfiguration.IsAuditable<Status>() .DisplayMember(t => t.Name); Create an Audit Log var db = new TrackerContext(); var audit = db.BeginAudit(); // make some updates ... db.SaveChanges(); var log = audit.LastLog;

  Read the article

• Oracle’s Web Experience Management

  - by Christie Flanagan

  Today’s guest post on Oracle’s Web Experience Management comes from a member of our WebCenter Evangelist team, Noël Jaffré, a Principal Technologist based in France.Oracle’s Web Experience Management (WEM) solution enables organizations to optimize the online channel for driving marketing and customer experience management success. It empowers business users to manage the web presence and create rich and engaging online experiences for customers and prospects. Oracle's WEM platform provides a framework to simplify the integration of Oracle, third-party and custom-built applications. This framework essentially allows the creation and integration of applications using one single business interface called the WEM interface. It includes the following: Single sign-on access control for all integrated applications using the Central Authentication Service (CAS) component. A single centralized administration window for user, role, and native applications management including site management. Community server management, gadget server management as well as management for partner integrated technologies. A Representational State Transfer (REST) API for accessing WebCenter Sites data. REST services are supported on both Oracle WebCenter Sites and Oracle WebCenter Sites Satellite Server to leverage the satellite server cache. All REST requests are cached for web consuming applications as well for the high performance delivery of native applications on the mobile channel. Oracle WebCenter Sites’ Web Experience Management environment enables organizations to deliver a compelling online experience to customers by simplifying the deployment and management of sophisticated and engaging websites. The WebCenter Sites platform automates the entire process of managing web content including: Authoring:  Business users can easily contribute and manage web content in real-time, with intuitive interfaces and drag-and-drop content authoring and layout capabilities designed for the non-technical user. Contextual Content Targeting: Marketers are empowered to create and manage targeted campaigns with relevant recommendations and promotions based on the context of the session of the visitor such as his or her navigation history, user profile, language, location or other information shared during the visitor session. Content Publishing and Deployment: It offers advanced multi-site management capabilities for departmental or regional sites, as well as strong multi-lingual and multi-locale content management. The remote satellite server caching infrastructure provides high-performance, distributed caching, tuned to deliver high-volume, targeted and multi-lingual sites. Analytics and Optimization: Business users and marketers have the ability to measure the effectiveness of their online content and campaigns at a granular level. Editors and marketers can immediately determine whether a given article or promotion is relevant to a particular customer segment. User-generated Content: Marketers can enable blogs, comments, rating and reviews on the website.  All comments and reviews posted to the website can be moderated from the administrator interface either manually or automatically using filters, whitelists, blacklists or community based moderation. Personalized Gadget Dashboards:  Site managers can deploy gadgets, small applications using web content, individually or as part of dashboards containing multiple gadgets.  These gadget dashboards enable site visitors to create their own “MyPage” on a given site where they can select and customize the gadgets that the site administrator has made available.  Any gadget that conforms to the iGoogle/OpenSocial standard can be made available to site visitors, or they can be created within the WEM interface. Oracle's WEM platform also provides a unique environment for the delivery of a rich, multichannel online experience for site visitors through its advanced management modules for mobile. With Oracle’s WEM solution, it’s easy to control branding and deliver a consistent message while repurposing web content for publication to mobile devices, kiosks and much more. This distinctive approach provides: HTML5 Delivery: HTML5 delivery which includes native support for adaptive design that responds to the user’s computer screen resolution and orientation. The approach is less driven by the particular hardware and more driven by the user’s interactions with the device. In other words, this approach takes both the screen interactions (either cursor or touch) and screen sizes and orientation into consideration. A Unique Native Mobile Extension Environment for Contributors: From the WEM interface, a contributor can directly manage their mobile channel, using the tooling already in place for driving the traditional web presence. This includes the mobile presentation, as well as mobile insite editing, drag and drop page layout, and in-context recommendations and personalization. Optimized REST APIs for High Performance Content Delivery on Native Mobile Device Applications: WebCenter Sites’ REST API uses the underlying HTTP methods (GET, POST, PUT, DELETE) to interact with resources. Resources support two types of input and output formats -- XML and JSON. REST calls are customizable to optimize the interactions between the content repositories and the client applications. Caching is essential to decrease network loads and improve overall reliability and usability of the applications and user interactions. REST results are cached through the highly efficient Oracle WebCenter Sites caching architecture.

  Read the article

• Event Logging in LINQ C# .NET

  The first thing you'll want to do before using this code is to create a table in your database called TableHistory: CREATE TABLE [dbo].[TableHistory] (     [TableHistoryID] [int] IDENTITY NOT NULL ,     [TableName] [varchar] (50) NOT NULL ,     [Key1] [varchar] (50) NOT NULL ,     [Key2] [varchar] (50) NULL ,     [Key3] [varchar] (50) NULL ,     [Key4] [varchar] (50) NULL ,     [Key5] [varchar] (50) NULL ,     [Key6] [varchar] (50)NULL ,     [ActionType] [varchar] (50) NULL ,     [Property] [varchar] (50) NULL ,     [OldValue] [varchar] (8000) NULL ,     [NewValue] [varchar] (8000) NULL ,     [ActionUserName] [varchar] (50) NOT NULL ,     [ActionDateTime] [datetime] NOT NULL ) Once you have created the table, you'll need to add it to your custom LINQ class (which I will refer to as DboDataContext), thus creating the TableHistory class. Then, you'll need to add the History.cs file to your project. You'll also want to add the following code to your project to get the system date: public partial class DboDataContext{ [Function(Name = "GetDate", IsComposable = true)] public DateTime GetSystemDate() { MethodInfo mi = MethodBase.GetCurrentMethod() as MethodInfo; return (DateTime)this.ExecuteMethodCall(this, mi, new object[] { }).ReturnValue; }}private static Dictionary<type,> _cachedIL = new Dictionary<type,>();public static T CloneObjectWithIL<t>(T myObject){ Delegate myExec = null; if (!_cachedIL.TryGetValue(typeof(T), out myExec)) { // Create ILGenerator DynamicMethod dymMethod = new DynamicMethod("DoClone", typeof(T), new Type[] { typeof(T) }, true); ConstructorInfo cInfo = myObject.GetType().GetConstructor(new Type[] { }); ILGenerator generator = dymMethod.GetILGenerator(); LocalBuilder lbf = generator.DeclareLocal(typeof(T)); //lbf.SetLocalSymInfo("_temp"); generator.Emit(OpCodes.Newobj, cInfo); generator.Emit(OpCodes.Stloc_0); foreach (FieldInfo field in myObject.GetType().GetFields( System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.Public | System.Reflection.BindingFlags.NonPublic)) { // Load the new object on the eval stack... (currently 1 item on eval stack) generator.Emit(OpCodes.Ldloc_0); // Load initial object (parameter) (currently 2 items on eval stack) generator.Emit(OpCodes.Ldarg_0); // Replace value by field value (still currently 2 items on eval stack) generator.Emit(OpCodes.Ldfld, field); // Store the value of the top on the eval stack into // the object underneath that value on the value stack. // (0 items on eval stack) generator.Emit(OpCodes.Stfld, field); } // Load new constructed obj on eval stack -> 1 item on stack generator.Emit(OpCodes.Ldloc_0); // Return constructed object. --> 0 items on stack generator.Emit(OpCodes.Ret); myExec = dymMethod.CreateDelegate(typeof(Func<t,>)); _cachedIL.Add(typeof(T), myExec); } return ((Func<t,>)myExec)(myObject);}I got both of the above methods off of the net somewhere (maybe even from CodeProject), but it's been long enough that I can't recall where I got them.Explanation of the History ClassThe History class records changes by creating a TableHistory record, inserting the values for the primary key for the table being modified into the Key1, Key2, ..., Key6 columns (if you have more than 6 values that make up a primary key on any table, you'll want to modify this), setting the type of change being made in the ActionType column (INSERT, UPDATE, or DELETE), old value and new value if it happens to be an update action, and the date and Windows identity of the user who made the change.Let's examine what happens when a call is made to the RecordLinqInsert method:public static void RecordLinqInsert(DboDataContext dbo, IIdentity user, object obj){ TableHistory hist = NewHistoryRecord(obj); hist.ActionType = "INSERT"; hist.ActionUserName = user.Name; hist.ActionDateTime = dbo.GetSystemDate(); dbo.TableHistories.InsertOnSubmit(hist);}private static TableHistory NewHistoryRecord(object obj){ TableHistory hist = new TableHistory(); Type type = obj.GetType(); PropertyInfo[] keys; if (historyRecordExceptions.ContainsKey(type)) { keys = historyRecordExceptions[type].ToArray(); } else { keys = type.GetProperties().Where(o => AttrIsPrimaryKey(o)).ToArray(); } if (keys.Length > KeyMax) throw new HistoryException("object has more than " + KeyMax.ToString() + " keys."); for (int i = 1; i <= keys.Length; i++) { typeof(TableHistory) .GetProperty("Key" + i.ToString()) .SetValue(hist, keys[i - 1].GetValue(obj, null).ToString(), null); } hist.TableName = type.Name; return hist;}protected static bool AttrIsPrimaryKey(PropertyInfo pi){ var attrs = from attr in pi.GetCustomAttributes(typeof(ColumnAttribute), true) where ((ColumnAttribute)attr).IsPrimaryKey select attr; if (attrs != null && attrs.Count() > 0) return true; else return false;}RecordLinqInsert takes as input a data context which it will use to write to the database, the user, and the LINQ object to be recorded (a single object, for instance, a Customer or Order object if you're using AdventureWorks). It then calls the NewHistoryRecord method, which uses LINQ to Objects in conjunction with the AttrIsPrimaryKey method to pull all the primary key properties, set the Key1-KeyN properties of the TableHistory object, and return the new TableHistory object. The code would be called in an application, like so: Continue span.fullpost {display:none;}

  Read the article

• How to Sync Any Folder With SkyDrive on Windows 8.1

  - by Chris Hoffman

  Before Windows 8.1, it was possible to sync any folder on your computer with SkyDrive using symbolic links. This method no longer works now that SkyDrive is baked into Windows 8.1, but there are other tricks you can use. Creating a symbolic link or directory junction inside your SkyDrive folder will give you an empty folder in your SkyDrive cloud storage. Confusingly, the files will appear inside the SkyDrive Modern app as if they were being synced, but they aren’t. The Solution With SkyDrive refusing to understand and accept symbolic links in its own folder, the best option is probably to use symbolic links anyway — but in reverse. For example, let’s say you have a program that automatically saves important data to a folder anywhere on your hard drive — whether it’s C:\Users\USER\Documents\, C:\Program\Data, or anywhere else. Rather than trying to trick SkyDrive into understanding a symbolic link, we could instead move the actual folder itself to SkyDrive and then use a symbolic link at the folder’s original location to trick the original program. This may not work for every single program out there. But it will likely work for most programs, which use standard Windows API calls to access folders and save files. We’re just flipping the old solution here — we can’t trick SkyDrive anymore, so let’s try to trick other programs instead. Moving a Folder and Creating a Symbolic Link First, ensure no program is using the external folder. For example, if it’s a program data or settings folder, close the program that’s using the folder. Next, simply move the folder to your SkyDrive folder. Right-click the external folder, select Cut, go to the SkyDrive folder, right-click and select Paste. The folder will now be located in the SkyDrive folder itself, so it will sync normally. Next, open a Command Prompt window as Administrator. Right-click the Start button on the taskbar or press Windows Key + X and select Command Prompt (Administrator) to open it. Run the following command to create a symbolic link at the original location of the folder: mklink /d “C:\Original\Folder\Location” “C:\Users\NAME\SkyDrive\FOLDERNAME\” Enter the correct paths for the exact location of the original folder and the current location of the folder in your SkyDrive. Windows will then create a symbolic link at the folder’s original location. Most programs should hopefully be tricked by this symbolic location, saving their files directly to SkyDrive. You can test this yourself. Put a file into the folder at its original location. It will be saved to SkyDrive and sync normally, appearing in your SkyDrive storage online. One downside here is that you won’t be able to save a file onto SkyDrive without it taking up space on the same hard drive SkyDrive is on. You won’t be able to scatter folders across multiple hard drives and sync them all. However, you could always change the location of the SkyDrive folder on Windows 8.1 and put it on a drive with a larger amount of free space. To do this, right-click the SkyDrive folder in File Explorer, select Properties, and use the options on the Location tab. You could even use Storage Spaces to combine the drives into one larger drive. Automatically Copy the Original Files to SkyDrive Another option would be to run a program that automatically copies files from another folder on your computer to your SkyDrive folder. For example, let’s say you want to sync copies of important log files that a program creates in a specific folder. You could use a program that allows you to schedule automatic folder-mirroring, configuring the program to regularly copy the contents of your log folder to your SkyDrive folder. This may be a useful alternative for some use cases, although it isn’t the same as standard syncing. You’ll end up with two copies of the files taking up space on your system, which won’t be ideal for large files. The files also won’t be instantly uploaded to your SkyDrive storage after they’re created, but only after the scheduled task runs. There are many options for this, including Microsoft’s own SyncToy, which continues to work on Windows 8. If you were using the symbolic link trick to automatically sync copies of PC game save files with SkyDrive, you could just install GameSave Manager. It can be configured to automatically create backup copies of your computer’s PC game save files on a schedule, saving them to SkyDrive where they’ll be synced and backed up online. SkyDrive support was completely rewritten for Windows 8.1, so it’s not surprising that this trick no longer works. The ability to use symbolic links in previous versions of SkyDrive was never officially supported, so it’s not surprising to see it break after a rewrite. None of the methods above are as convenient and quick as the old symbolic link method, but they’re the best we can do with the SkyDrive integration Microsoft has given us in Windows 8.1. It’s still possible to use symbolic links to easily sync other folders with competing cloud storage services like Dropbox and Google Drive, so you may want to consider switching away from SkyDrive if this feature is critical to you.     

  Read the article

• Querying Visual Studio project files using T-SQL and Powershell

  - by jamiet

  Earlier today I had a need to get some information out of a Visual Studio project file and in this blog post I’m going to share a couple of ways of going about that because I’m pretty sure I won’t be the only person that ever wants to do this. The specific problem I was trying to solve was finding out how many objects in my database project (i.e. in my .dbproj file) had any warnings suppressed but the techniques discussed below will work pretty well for any Visual Studio project file because every such file is simply an XML document, hence it can be queried by anything that can query XML documents. Ever heard the phrase “when all you’ve got is hammer everything looks like a nail”? Well that’s me with querying stuff – if I can write SQL then I’m writing SQL. Here’s a little noddy database project I put together for demo purposes: Two views and a stored procedure, nothing fancy. I suppressed warnings for [View1] & [Procedure1] and hence the pertinent part my project file looks like this:   <ItemGroup>    <Build Include="Schema Objects\Schemas\dbo\Views\View1.view.sql">      <SubType>Code</SubType>      <SuppressWarnings>4151,3276</SuppressWarnings>    </Build>    <Build Include="Schema Objects\Schemas\dbo\Views\View2.view.sql">      <SubType>Code</SubType>    </Build>    <Build Include="Schema Objects\Schemas\dbo\Programmability\Stored Procedures\Procedure1.proc.sql">      <SubType>Code</SubType>      <SuppressWarnings>4151</SuppressWarnings>    </Build>  </ItemGroup>  <ItemGroup> Note the <SuppressWarnings> elements – those are the bits of information that I am after. With a lot of help from folks on the SQL Server XML forum  I came up with the following query that nailed what I was after. It reads the contents of the .dbproj file into a variable of type XML and then shreds it using T-SQL’s XML data type methods: DECLARE @xml XML; SELECT @xml = CAST(pkgblob.BulkColumn AS XML) FROM   OPENROWSET(BULK 'C:\temp\QueryingProjectFileDemo\QueryingProjectFileDemo.dbproj' -- <-Change this path!                    ,single_blob) AS pkgblob                    ;WITH XMLNAMESPACES( 'http://schemas.microsoft.com/developer/msbuild/2003' AS ns) SELECT  REVERSE(SUBSTRING(REVERSE(ObjectPath),0,CHARINDEX('\',REVERSE(ObjectPath)))) AS [ObjectName]        ,[SuppressedWarnings] FROM   (        SELECT  build.query('.') AS [_node]        ,       build.value('ns:SuppressWarnings[1]','nvarchar(100)') AS [SuppressedWarnings]        ,       build.value('@Include','nvarchar(1000)') AS [ObjectPath]        FROM    @xml.nodes('//ns:Build[ns:SuppressWarnings]') AS R(build)        )q And here’s the output: And that’s it – an easy way of discovering which warnings have been suppressed and for which objects in your database projects. I won’t bother going over the code as it is fairly self-explanatory – peruse it at your leisure.   Once I had the SQL above I figured I’d share it around a little in case it was ever useful to anyone else; hence I’m writing this blog post and I also posted it on the Visual Studio Database Development Tools forum at FYI: Discover which objects have had warnings suppressed. Luckily Kevin Goode saw the thread and he posted a different solution to the same problem, one that uses Powershell. The advantage of Kevin’s Powershell approach is that it is easy to analyse many .dbproj files at the same time. Below is Kevin’s code which I have tweaked ever so slightly so that it produces the same results as my SQL script (I just want any object that had had a warning suppressed whereas Kevin was querying specifically for warning 4151):   cd 'C:\Temp\QueryingProjectFileDemo\' cls $projects = ls -r -i *.dbproj Foreach($project in $projects) { $xml = new-object System.Xml.XmlDocument $xml.set_PreserveWhiteSpace( $true ) $xml.Load($project) #$xpath = @{Start="/e:Project/e:ItemGroup/e:Build[e:SuppressWarnings=4151]/@Include"} #$xpath = @{Start="/e:Project/e:ItemGroup/e:Build[contains(e:SuppressWarnings,'4151')]/@Include"} $xpath = @{Start="/e:Project/e:ItemGroup/e:Build[e:SuppressWarnings]/@Include"} $ns = @{ e = "http://schemas.microsoft.com/developer/msbuild/2003" } $xml | Select-Xml -XPath $xpath.Start -Namespace $ns |Select -Expand Node | Select -expand Value } and here’s the output: Nice reusable Powershell and SQL scripts – not bad for an evening’s work. Thank you to Kevin for allowing me to share his code. Don’t forget that these techniques can easily be adapted to query any Visual Studio project file, they’re only XML documents after all! Doubtless many people out there already have code for doing this but nonetheless here is another offering to the great script library in the sky. Have fun! @Jamiet

  Read the article

• .NET Security Part 2

  - by Simon Cooper

  So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Write your Tests in RSpec with IronRuby

  - by kazimanzurrashid

  [Note: This is not a continuation of my previous post, treat it as an experiment out in the wild. ] Lets consider the following class, a fictitious Fund Transfer Service: public class FundTransferService : IFundTransferService { private readonly ICurrencyConvertionService currencyConvertionService; public FundTransferService(ICurrencyConvertionService currencyConvertionService) { this.currencyConvertionService = currencyConvertionService; } public void Transfer(Account fromAccount, Account toAccount, decimal amount) { decimal convertionRate = currencyConvertionService.GetConvertionRate(fromAccount.Currency, toAccount.Currency); decimal convertedAmount = convertionRate * amount; fromAccount.Withdraw(amount); toAccount.Deposit(convertedAmount); } } public class Account { public Account(string currency, decimal balance) { Currency = currency; Balance = balance; } public string Currency { get; private set; } public decimal Balance { get; private set; } public void Deposit(decimal amount) { Balance += amount; } public void Withdraw(decimal amount) { Balance -= amount; } } We can write the spec with MSpec + Moq like the following: public class When_fund_is_transferred { const decimal ConvertionRate = 1.029m; const decimal TransferAmount = 10.0m; const decimal InitialBalance = 100.0m; static Account fromAccount; static Account toAccount; static FundTransferService fundTransferService; Establish context = () => { fromAccount = new Account("USD", InitialBalance); toAccount = new Account("CAD", InitialBalance); var currencyConvertionService = new Moq.Mock<ICurrencyConvertionService>(); currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); fundTransferService = new FundTransferService(currencyConvertionService.Object); }; Because of = () => { fundTransferService.Transfer(fromAccount, toAccount, TransferAmount); }; It should_decrease_from_account_balance = () => { fromAccount.Balance.ShouldBeLessThan(InitialBalance); }; It should_increase_to_account_balance = () => { toAccount.Balance.ShouldBeGreaterThan(InitialBalance); }; } and if you run the spec it will give you a nice little output like the following: When fund is transferred » should decrease from account balance » should increase to account balance 2 passed, 0 failed, 0 skipped, took 1.14 seconds (MSpec). Now, lets see how we can write exact spec in RSpec. require File.dirname(__FILE__) + "/../FundTransfer/bin/Debug/FundTransfer" require "spec" require "caricature" describe "When fund is transferred" do Convertion_Rate = 1.029 Transfer_Amount = 10.0 Initial_Balance = 100.0 before(:all) do @from_account = FundTransfer::Account.new("USD", Initial_Balance) @to_account = FundTransfer::Account.new("CAD", Initial_Balance) currency_convertion_service = Caricature::Isolation.for(FundTransfer::ICurrencyConvertionService) currency_convertion_service.when_receiving(:get_convertion_rate).with(:any, :any).return(Convertion_Rate) fund_transfer_service = FundTransfer::FundTransferService.new(currency_convertion_service) fund_transfer_service.transfer(@from_account, @to_account, Transfer_Amount) end it "should decrease from account balance" do @from_account.balance.should be < Initial_Balance end it "should increase to account balance" do @to_account.balance.should be > Initial_Balance end end I think the above code is self explanatory, treat the require(line 1- 4) statements as the add reference of our visual studio projects, we are adding all the required libraries with this statement. Next, the describe which is a RSpec keyword. The before does exactly the same as NUnit's Setup or MsTest’s TestInitialize attribute, but in the above we are using before(:all) which acts as ClassInitialize of MsTest, that means it will be executed only once before all the test methods. In the before(:all) we are first instantiating the from and to accounts, it is same as creating with the full name (including namespace)  like fromAccount = new FundTransfer.Account(.., ..), next, we are creating a mock object of ICurrencyConvertionService, check that for creating the mock we are not using the Moq like the MSpec version. This is somewhat an interesting issue of IronRuby or maybe the DLR, it seems that it is not possible to use the lambda expression that most of the mocking tools uses in arrange phase in Iron Ruby, like: currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); But the good news is, there is already an excellent mocking tool called Caricature written completely in IronRuby which we can use to mock the .NET classes. May be all the mocking tool providers should give some thought to add the support for the DLR, so that we can use the tool that we are already familiar with. I think the rest of the code is too simple, so I am skipping the explanation. Now, the last thing, how we are going to run it with RSpec, lets first install the required gems. Open you command prompt and type the following: igem sources -a http://gems.github.com This will add the GitHub as gem source. Next type: igem install uuidtools caricature rspec and at last we have to create a batch file so that we can execute it in the Notepad++, create a batch like in the IronRuby bin directory like my previous post and put the following in that batch file: @echo off cls call spec %1 --format specdoc pause Next, add a run menu and shortcut in the Notepad++ like my previous post. Now when we run it it will show the following output: When fund is transferred - should decrease from account balance - should increase to account balance Finished in 0.332042 seconds 2 examples, 0 failures Press any key to continue . . . You will complete code of this post in the bottom. That's it for today. Download: RSpecIntegration.zip

  Read the article

• Mocking successive calls of similar type via sequential mocking

  - by mehfuzh

  In this post , i show how you can benefit from  sequential mocking feature[In JustMock] for setting up expectations with successive calls of same type.  To start let’s first consider the following dummy database and entity class. public class Person {     public virtual string Name { get; set; }     public virtual int Age { get; set; } }   public interface IDataBase {     T Get<T>(); } Now, our test goal is to return different entity for successive calls on IDataBase.Get<T>(). By default, the behavior in JustMock is override , which is similar to other popular mocking tools. By override it means that the tool will consider always the latest user setup. Therefore, the first example will return the latest entity every-time and will fail in line #12: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   Mock.Arrange(() => database.Get<Person>()).Returns(() => queue.Dequeue()); Mock.Arrange(() => database.Get<Person>()).Returns(person2);   // this will fail Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode());   Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); We can solve it the following way using a Queue and that removes the item from bottom on each call: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   queue.Enqueue(person1); queue.Enqueue(person2);   Mock.Arrange(() => database.Get<Person>()).Returns(queue.Dequeue());   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); This will ensure that right entity is returned but this is not an elegant solution. So, in JustMock we introduced a  new option that lets you set up your expectations sequentially. Like: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Mock.Arrange(() => database.Get<Person>()).Returns(person1).InSequence(); Mock.Arrange(() => database.Get<Person>()).Returns(person2).InSequence();   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); The  “InSequence” modifier will tell the mocking tool to return the expected result as in the order it is specified by user. The solution though pretty simple and but neat(to me) and way too simpler than using a collection to solve this type of cases. Hope that helps P.S. The example shown in my blog is using interface don’t require a profiler  and you can even use a notepad and build it referencing Telerik.JustMock.dll, run it with GUI tools and it will work. But this feature also applies to concrete methods that includes JM profiler and can be implemented for more complex scenarios.

  Read the article

• Dynamic Bursting ... no really!

  - by Tim Dexter

  If any of you have seen me or my colleagues present BI Publisher to you then we have hopefully mentioned 'bursting.' You may have even seen a demo where we talk about being able to take a batch of data, say invoices. Then split them by some criteria, say customer id; format them with a template; generate the output and then deliver the documents to the recipients with a click. We and especially I, always say this can be completely dynamic! By this I mean, that you could store customer preferences in a database. What layout would each customer like; what output format they would like and how they would like the document delivered. We (I) talk a good talk, but typically don't do the walk in a demo. We hard code everything in the bursting query or bursting control file to get the concept across. But no more peeps! I have finally put together a dynamic bursting demo! Its been minutes in the making but its been tough to find those minutes! Read on ... It's nothing amazing in terms of making the burst dynamic. I created a CUSTOMER_PREFS table with some simple UI in an APEX application so that I can maintain their requirements. In EBS you have descriptive flexfields that could do the same thing or probably even 'contact' fields to store most of the info. Here's my table structure: Name                           Type ------------------------------ -------- CUSTOMER_ID                    NUMBER(6) TEMPLATE_TYPE                  VARCHAR2(20) TEMPLATE_NAME                  VARCHAR2(120) OUTPUT_FORMAT                  VARCHAR2(20) DELIVERY_CHANNEL               VARCHAR2(50) EMAIL                          VARCHAR2(255) FAX                            VARCHAR2(20) ATTACH                         VARCHAR2(20) FILE_LOC                       VARCHAR2(255) Simple enough right? Just need CUSTOMER_ID as the key for the bursting engine to join it to the customer data at burst time. I have not covered the full delivery options, just email, fax and file location. Remember, its a demo people :0) However the principal is exactly the same for each delivery type. They each have a set of attributes that need to be provided and you will need to handle that in your bursting query. On a side note, in EBS, you use a bursting control file, you can apply the same principals that I'm laying out here you just need to get the customer bursting info into the XML data stream so that you can refer to it in the control file using XPATH expressions. Next, we need to look up what attributes or parameters are required for each delivery method. that can be found in the documentation here.  Now we know the combinations of parameters and delivery methods we can construct the query using a series a decode statements: select distinct cp.customer_id "KEY", cp.template_name TEMPLATE, cp.template_type TEMPLATE_FORMAT, 'en-US' LOCALE, cp.output_format OUTPUT_FORMAT, 'false' SAVE_FORMAT, cp.delivery_channel DEL_CHANNEL, decode(cp.delivery_channel,'FILE', cp.file_loc , 'EMAIL', cp.email , 'FAX', cp.fax) PARAMETER1, decode(cp.delivery_channel,'FILE', c.cust_last_name||'_orders.pdf' ,'EMAIL','[email protected]' ,'FAX', 'faxserver.com') PARAMETER2, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX', null) PARAMETER3, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Your current orders' ,'FAX',NULL) PARAMETER4, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Please find attached a copy of your current orders with BI Publisher, Inc' ,'FAX',NULL) PARAMETER5, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','false' ,'FAX',NULL) PARAMETER6, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX',NULL) PARAMETER7 from cust_prefs cp, customers c, orders_view ov where cp.customer_id = c.customer_id and cp.customer_id = ov.customer_id order by cp.customer_id Pretty straightforward, just need to test, test, test, the query and ensure it's bringing back the correct data based on each customers preferences. Notice the NULL values for parameters that are not relevant for a given delivery channel. You should end up with bursting control data that the bursting engine can use:  Now, your users can run the burst and documents will be formatted, generated and delivered based on the customer prefs. If you're interested in the example, I have used the sample OE schema data for the base report. The report files and CUST_PREFS table are zipped up here. The zip contains the data model (.xdmz), the report and templates (.xdoz) and the sql scripts to create and load data to the CUST_PREFS table.  Once you load the report into the catalog, you'll need to create the OE data connection and point the data model at it. You'll probably need to re-point the report to the data model too. Happy Bursting!

  Read the article

• Timeout Considerations for Solicit Response – Part 2

  - by Michael Stephenson

  To follow up a previous article about timeouts and how they can affect your application I have extended the sample we were using to include WCF. I will execute some test scenarios and discuss the results. The sample We begin by consuming exactly the same web service which is sitting on a remote server. This time I have created a .net 3.5 application which will consume the web service using the basichttp binding. To show you the configuration for the consumption of this web service please refer to the below diagram. You can see like before we also have the connectionManagement element in the configuration file. I have added a WCF service reference (also using the asynchronous proxy methods) and have the below code sample in the application which will asynchronously make the web service calls and handle the responses on a call back method invoked by a delegate. If you have read the previous article you will notice that the code is almost the same.   Sample 1 – WCF with Default Timeouts In this test I set about recreating the same scenario as previous where we would run the test but this time using WCF as the messaging component. For the first test I would use the default configuration settings which WCF had setup when we added a reference to the web service. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client-side trace is as follows:   The server-side trace is as follows: Some observations on the results are as follows: The timeouts happened quicker than in the previous tests because some calls were timing out before they attempted to connect to the server The first few calls that timed out did actually connect to the server and did execute successfully on the server   Test 2 – Increase Open Connection Timeout & Send Timeout In this test I wanted to increase both the send and open timeout values to try and give everything a chance to go through. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The client side trace for this test was   The server-side trace for this test was: Some observations on this test are: This test proved if the timeouts are high enough everything will just go through   Test 3 – Increase just the Send Timeout In this test we wanted to increase just the send timeout. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The below is the client side trace The below is the server side trace Some observations on this test are: In this test from both the client and server perspective everything ran through fine The open connection timeout did not seem to have any effect   Test 4 – Increase Just the Open Connection Timeout In this test I wanted to validate the change to the open connection setting by increasing just this on its own. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client side trace was The server side trace was Some observations on this test are: In this test you can see that the open connection which relates to opening the channel timeout increase was not the thing which stopped the calls timing out It's the send of data which is timing out On the server you can see that the successful few calls were fine but there were also a few calls which hit the server but timed out on the client You can see that not all calls hit the server which was one of the problems with the WSE and ASMX options   Test 5 – Smaller Increase in Send Timeout In this test I wanted to make a smaller increase to the send timeout than previous just to prove that it was the key setting which was controlling what was timing out. The timeout values for this test are: openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:02:30"   The Test We simulated 21 calls to the web service Test Results The client side trace was   The server side trace was Some observations on this test are: You can see that most of the calls got through fine On the client you can see that call 20 timed out but still hit the server and executed fine.   Summary At this point between the two articles we have quite a lot of scenarios showing the different way the timeout setting have played into our original performance issue, and now we can see how WCF could offer an improved way to handle the problem. To summarise the differences in the timeout properties for the three technology stacks: ASMX The timeout value only applies to the execution time of your request on the server. The timeout does not consider how long your code might be waiting client side to get a connection. WSE The timeout value includes both the time to obtain a connection and also the time to execute the request. A timeout will not be thrown as an error until an attempt to connect to the server is made. This means a 40 second timeout setting may not throw the error until 60 seconds when the connection to the server is made. If the connection to the server is made you should be aware that your message will be processed and you should design for this. WCF The WCF send timeout is the setting most equivalent to the settings we were looking at previously. Like WSE this setting the counter includes the time to get a connection as well as the time to execute on a server. Unlike WSE and ASMX an error will be thrown as soon as the send timeout from making your call from user code has elapsed regardless of whether we are waiting for a connection or have an open connection to the server. This may to a user appear to have better latency in getting an error response compared to WSE or ASMX.

  Read the article

• NDepend 4 – First Steps

  - by Ricardo Peres

  Introduction Thanks to Patrick Smacchia I had the chance to test NDepend 4. I can only say: awesome! This will be the first of a series of posts on NDepend, where I will talk about my discoveries. Keep in mind that I am just starting to use it, so more experienced users may find these too basic, I just hope I don’t say anything foolish! I must say that I am in no way affiliated with NDepend and I never actually met Patrick. Installation No installation program – a curious decision, I’m not against it -, just unzip the files to a folder and run the executable. It will optionally register itself with Visual Studio 2008, 2010 and 11 as well as RedGate’s Reflector; also, it automatically looks for updates. NDepend can either be used as a stand-alone program (with or without a GUI) or from within Visual Studio or Reflector. Getting Started One thing that really pleases me is the Getting Started section of the stand-alone, with links to pages on NDepend’s web site, featuring detailed explanations, which usually include screenshots and small videos (<5 minutes). There’s also an How do I with hierarchical navigation that guides us to through the major features so that we can easily find what we want. Usage There are two basic ways to use NDepend: Analyze .NET solutions, projects or assemblies; Compare two versions of the same assembly. I have so far not used NDepend to compare assemblies, so I will first talk about the first option. After selecting a solution and some of its projects, it generates a single HTML page with an highly detailed report of the analysis it produced. This includes some metrics such as number of lines of code, IL instructions, comments, types, methods and properties, the calculation of the cyclomatic complexity, coupling and lots of others indicators, typically grouped by type, namespace and assembly. The HTML also includes some nice diagrams depicting assembly dependencies, type and method relative proportions (according to the number of IL instructions, I guess) and assembly analysis relating to abstractness and stability. Useful, I would say. Then there’s the rules; NDepend tests the target assemblies against a set of more than 120 rules, grouped in categories Code Quality, Object Oriented Design, Design, Architecture and Layering, Dead Code, Visibility, Naming Conventions, Source Files Organization and .NET Framework Usage. The full list can be configured on the application, and an explanation of each rule can be found on the web site. Rules can be validated, violated and violated in a critical manner, and the HTML will contain the violated rules, their queries – more on this later - and results. The HTML uses some nice JavaScript effects, which allow paging and sorting of tables, so its nice to use. Similar to the rules, there are some queries that display results for a number (about 200) questions grouped as Object Oriented Design, API Breaking Changes (for assembly version comparison), Code Diff Summary (also for version comparison) and Dead Code. The difference between queries and rules is that queries are not classified as passes, violated or critically violated, just present results. The queries and rules are expressed through CQLinq, which is a very powerful LINQ derivative specific to code analysis. All of the included rules and queries can be enabled or disabled and new ones can be added, with intellisense to help. Besides the HTML report file, the NDepend application can be used to explore all analysis results, compare different versions of analysis reports and to run custom queries. Comparison to Other Analysis Tools Unlike StyleCop, NDepend only works with assemblies, not source code, so you can’t expect it to be able to enforce brackets placement, for example. It is more similar to FxCop, but you don’t have the option to analyze at the IL level, that is, other that the number of IL instructions and the complexity. What’s Next In the next days I’ll continue my exploration with a real-life test case. References The NDepend web site is http://www.ndepend.com/. Patrick keeps an updated blog on http://codebetter.com/patricksmacchia/ and he regularly monitors StackOverflow for questions tagged NDepend, which you can find on http://stackoverflow.com/questions/tagged/ndepend. The default list of CQLinq rules, queries and statistics can be found at http://www.ndepend.com/DefaultRules/webframe.html. The syntax itself is described at http://www.ndepend.com/Doc_CQLinq_Syntax.aspx and its features at http://www.ndepend.com/Doc_CQLinq_Features.aspx.

  Read the article

• ASP.NET Web Forms Extensibility: Control Adapters

  - by Ricardo Peres

  All ASP.NET controls from version 2.0 can be associated with a control adapter. A control adapter is a class that inherits from ControlAdapter and it has the chance to interact with the control(s) it is targeting so as to change some of its properties or alter its output. I talked about control adapters before and they really a cool feature. The ControlAdapter class exposes virtual methods for some well known lifecycle events, OnInit, OnLoad, OnPreRender and OnUnload that closely match their Control counterparts, but are fired before them. Because the control adapter has a reference to its target Control, it can cast it to its concrete class and do something with it before its lifecycle events are actually fired. The adapter is also notified before the control is rendered (BeginRender), after their children are renderes (RenderChildren) and after itself is rendered (Render): this way the adapter can modify the control’s output. Control adapters may be specified for any class inheriting from Control, including abstract classes, web server controls and even pages. You can, for example, specify a control adapter for the WebControl and UserControl classes, but, curiously, not for Control itself. When specifying a control adapter for a page, it must inherit from PageAdapter instead of ControlAdapter. The adapter for a control, if specified, can be found on the protected Adapter property, and for a page, on the PageAdapter property. The first use of control adapters that came to my attention was for changing the output of standard ASP.NET web controls so that they were more based on CSS and less on HTML tables: it was the CSS Friendly Control Adapters project, now available at http://code.google.com/p/aspnetcontroladapters/. They are interesting because you specify them in one location and they apply anywhere a control of the target type is created. Mind you, it applies to controls declared on markup as well as controls created by code with the new operator. So, how do you use control adapters? The most usual way is through a browser definition file. In it, you specify a set of control adapters and their target controls, for a given browser. This browser definition file is a XML file with extension .Browser, and can either be global (%WINDIR%\Microsoft.NET\Framework64\vXXXX\Config\Browsers) or local to the web application, in which case, it must be placed inside the App_Browsers folder at the root of the web site. It looks like this: 1: <browsers> 2: <browser refID="Default"> 3: <controlAdapters> 4: <adapter controlType="System.Web.UI.WebControls.TextBox" adapterType="MyNamespace.TextBoxAdapter, MyAssembly" /> 5: </controlAdapters> 6: </browser> 7: </browsers> A browser definition file targets a specific browser, so you can have different definitions for Chrome, IE, Firefox, Opera, as well as for specific version of each of those (like IE8, Firefox3). Alternatively, if you set the target to Default, it will apply to all. The reason to pick a specific browser and version might be, for example, in order to circumvent some limitation present in that specific version, so that on markup you don’t need to be concerned with that. Another option is through the the current Browser object of the request: 1: this.Context.Request.Browser.Adapters.Add(typeof(TextBox).FullName, typeof(TextBoxAdapter).FullName); This must go very early on the page lifecycle, for example, on the OnPreInit event, or even on Application_Start. You have to specify the full class name for both the target control and the adapter. Of course, you have to do this for every request, because it won’t be persisted. As an example, you may know that the classic TextBox control renders an HTML input tag if its TextMode is set to SingleLine and a textarea if set to MultiLine. Because the textarea has no notion of maximum length, unlike the input, something must be done in order to enforce this. Here’s a simple suggestion: 1: public class TextBoxControlAdapter : ControlAdapter 2: { 3: protected TextBox Target 4: { 5: get 6: { 7: return (this.Control as TextBox); 8: } 9: } 10:  11: protected override void OnLoad(EventArgs e) 12: { 13: if ((this.Target.MaxLength > 0) && (this.Target.TextMode == TextBoxMode.MultiLine)) 14: { 15: if (this.Target.Page.ClientScript.IsClientScriptBlockRegistered("TextBox_KeyUp") == false) 16: { 17: if (this.Target.Page.ClientScript.IsClientScriptBlockRegistered(this.Target.Page.GetType(), "TextBox_KeyUp") == false) 18: { 19: String script = String.Concat("function TextBox_KeyUp(sender) { if (sender.value.length > ", this.Target.MaxLength, ") { sender.value = sender.value.substr(0, ", this.Target.MaxLength, "); } }\n"); 20:  21: this.Target.Page.ClientScript.RegisterClientScriptBlock(this.Target.Page.GetType(), "TextBox_KeyUp", script, true); 22: } 23:  24: this.Target.Attributes["onkeyup"] = "TextBox_KeyUp(this)"; 25: } 26: } 27: 28: base.OnLoad(e); 29: } 30: } What it does is, for every TextBox control, if it is set for multi line and has a defined maximum length, it injects some JavaScript that will filter out any content that exceeds this maximum length. This will occur for any TextBox that you may have on your site, or any class that inherits from it. You can use any of the previous options to register this adapter. Stay tuned for more ASP.NET Web Forms extensibility tips!

  Read the article

• MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

  - by Bertrand Matthelié

  Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• Welcome to Jackstown

  - by fatherjack

  I live in a small town, the population count isn't that great but let me introduce you to some of the population. We'll start with Martin the Doc, he fixes up anything that gets poorly, so much so that he could be classed as the doctor, the vet and even the garage mechanic. He's got a reputation that he can fix anything and that hasn't been proved wrong yet. He's great friends with Brian (who gets called "Brains") the teacher who seems to have a sound understanding of any topic you care to pass his way. If he isn't sure he tells you and then goes to find out and comes back with a full answer real quick. Its good to have that sort of research capability close at hand. Brains is also great at encouraging anyone who needs a bit of support to get them up to speed and working on their jobs. Steve sees Brains regularly, that's because he is the librarian, he keeps all sorts of reading material and nowadays there's even video to watch about any topic you like. Steve keeps scouring all sorts of places to get the content that's needed and he keeps it in good order so that what ever is needed can be found quickly. He also has to make sure that old stuff gets marked as probably out of date so that anyone reading it wont get mislead. Over the road from him is Greg, he's the town crier. We don't have a newspaper here so Greg keeps us all informed of what's going on "out of town" - what new stuff we might make use of and what wont work in a small place like this. If we are interested he goes ahead and gets people in to demonstrate their products  and tell us about the details. Greg is pretty good at getting us discounts too. Now Greg's brother Ian works for the mayors office in the "waste management department" nowadays its all about the recycling but he still has to make sure that the stuff that cant be used any more gets disposed of properly. It depends on the type of waste he's dealing with that decides how it need to be treated and he has to know a lot about the different methods and when to use which ones. There are two people that keep the peace in town, Brent is the detective, investigating wrong doings and applying justice where necessary and Bart is the diplomat who smooths things over when any people have a dispute or disagreement. Brent is meticulous in his investigations and fair in the way he handles any situation he finds. Discretion is his byword. There's a rumour that Bart used to work for the United Nations but what ever his history there is no denying his ability to get apparently irreconcilable parties working together to their combined benefit. Someone who works closely with Bart is Brad, he is the translator in town. He has several languages that he can converse in but he can also explain things from someone's point of view or  and make it understandable to someone else. To keep things on the straight and narrow from a legal perspective is Ben the solicitor, making sure we all abide by the rules.Two people who make for an interesting evening's conversation if you get them together are Aaron and Grant, Aaron is the local planning inspector and Grant is an inventor of some reputation. Anything being constructed around here needs Aarons agreement. He's quite flexible in his rules though; if you can justify what you want to do with solid logic but he wont stand for any development going on without his inclusion. That gets a demolition notice and there's no argument. Grant as I mentioned is the inventor in town, if something can be improved or created then Grant is your man. He mainly works on his own but isnt averse to getting specific advice and assistance from specialist from out of town if they can help him finish his creations.There aren't too many people left for you to meet in the town, there's Rob, he's an ex professional sportsman. He played Hockey, Football, Cricket, you name it. He was in his element as goal keeper / wicket keeper and that shows in his personal life. He just goes about his business and people often don't even know that he's helped them. Really low profile, doesn't get any glory but saves people from lots of problems, even disasters on occasion. There goes Neil, he's a bit of an odd person, some people say he's gifted with special clairvoyant powers, personally I think he's got his ear to the ground and knows where to find out the important news as soon as its made public. Anyone getting a visit from Neil is best off to follow his advice though, he's usually spot on and you wont be caught by surprise if you follow his recommendations – wherever it comes from.Poor old Andrew is the last person to introduce you to. Andrew doesn't show himself too often but when he does it seems that people find a reason to blame him for their problems, whether he had anything to do with their predicament or not. In all honesty, without fail, and to his great credit, he takes it in good grace and never retaliates or gets annoyed when he's out and about.  It pays off too as its very often the case that those who were blaming him recently suddenly find they need his help and they readily forget the issues pretty rapidly.And then there's me, what do I do in town? Well, I'm just a DBA with a lot of hats. (Jackstown Pop. 1)

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >