Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 401/676 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• Amazon mount EBS

  - by William

  I'm trying to mount /vol to a EBS volume on an Amazon EC2 instance. I'm formatting the device to xfs, adding "/dev/sdh /vol xfs noatime 0 0" to my /etc/fstab file, making the /vol dir and mounting it and whenever I try to do anything with that volume (create a file in /vol, cd, ls, anything) or I try to run df the server just freezes. Anyone have any idea what this might be? It's driving me crazy. Edit: It seems to freeze after I mount, has nothing to do with doing any commands to the volume it's self.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• How to convert PowerPoint presentations into a Kindle/E-reader friendly form?

  - by Shiki

  I have a lot of documents in .ppt and .pptx (blame the co-workers). I would like to read them on way home or elsewhere... when I have a little time to catch up with things. One thing I could do with the documents is cutting them together into one file. But saving that one even if a smaller version of PDF (according to Office 2010) results in a huge file. And PDF is hardly readable on a Kindle. I would need something .epub free, easy-on-the-device way. Is there such a thing? (Manually I could copy all the images down into native text and whatnot and create new presentations, save those, convert them. But that would just take a lot of time.)

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• virtual box cannot detect webcam in ubuntu

  - by user23950

  I have installed virtual box for ubuntu 9.10. I installed a windows xp inside it. And I don't know why it does not make the webcam available for the yahoo messenger installed in xp. When I click on the device in the interface of virtual box. I can see the webcam but it is grayed out. And I don't know why. It is also not available when I use wine to execute yahoo messenger. And I know that it is working because I can see its working when I use skype for ubuntu. Any suggestions?Its an acer aspire laptop, the webcam is built in.

  Read the article

• Openfiler RAID 10 option not found

  - by chrisling106

  Hi, I'm building a NAS using Openfiler2.3 (from 32-bit ISO), first of all I want to experiment it on VM first before going out and buy the harddrives needed. I created 5 virtual drives on VMware, sda is 2GB and the rest 1GB each (sdb to sde). I left sda blank and want to setup a RAID 10 disk using sdb, sdc, sdd and sde, 4 RAID partitions are setup successfully, but when I try to create a RAID device the only option for RAID level is 1, 0, 5 and 6. RAID 10 is not there! Can someone let me know what have I missed, please? TIA.

  Read the article

• PPP connection between PalmOS and Ubuntu (over ttyUSB0?) without crashy "visor" kernel module

  - by Chris Boyle

  I have a Palm Treo 680 which I'd like to use as a media remote, using Palm MPC. Almost the exact instructions on that page used to work perfectly for establishing a PPP connection over the USB cable; I think I last tried it in Ubuntu 9.04 (Jaunty). In Karmic, I find that /dev/ttyUSB{0,1} are not present by default, and when I modprobe visor to get them, the Palm immediately crashes and reboots, as seen in Ubuntu bug 522753 (it reboots again as long as the module is still loaded and USB is still connected). The usbserial module has the same result. From reading that bug and elsewhere, it appears that the visor module is abandoned, and jpilot and friends use some other approach to talk to PalmOS over USB these days, which might not even involve a ttyUSB device. My question is, therefore: How do I create a PPP connection between PalmOS and Karmic without crashing the Palm?

  Read the article

• Ubuntu 12 Server messing up my hard disk

  - by Jeroen Jacobs

  I'm installing Ubuntu server on a disk with 12GB available. During the setup, I choose the default LVM-based partition layout. However for some reason, Ubuntu decides that it only wants to use 4GB of this disk. How do I reclaim the remaining space of the hard disk? "lvextent" doesn't work btw... output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 4.3G 3.4G 754M 82% / udev 3.9G 4.0K 3.9G 1% /dev tmpfs 1.6G 756K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 0 3.9G 0% /run/shm /dev/sda1 228M 25M 192M 12% /boot output of pvdisplay: --- Physical volume --- PV Name /dev/sda5 VG Name ubuntu PV Size 12.32 GiB / not usable 2.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 3154 Free PE 8 Allocated PE 3146 PV UUID dD06RZ-kGcL-1tTX-Ruds-XIDG-ssMd-FIUkzZ my partitions: Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 26343423 12920833 5 Extended /dev/sda5 501760 26343423 12920832 8e Linux LVM when I try lvextent, it says there is not enough diskspace.

  Read the article

• Compiling the Linux kernel, how much size is needed?

  - by ant2009

  I have downloaded the newest most stable Linux kernel, 2.6.33.2. I thought I would test this using VirtualBox. So I create a dynamically sized harddisk of 4 GB. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4 GB, but the actual size is 3.5 GB. $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a Linux kernel? Are there any guidelines to follow when doing this? This is my first time, so just experimenting with this.

  Read the article

• [Ubuntu] How can i log-in to Ubuntu using USB-serial console (rs232) ?

  - by marc

  Welcome, How can enable remote terminal login into Ubuntu 9.10 using usb-serial terminal ? I got created device ttyUSB0 and i want allow to log-in using hyper-terminal. I found some resources but they are related to real! hardware rs232 ports, i can't find any information about USB converter. Right now i have established connection between that usb-serial port and my laptop (i can send text writing to port cp sometext.txt /dev/ttyUSB0 and read using hyperterminal). Any idea ? Regards

  Read the article

• What are the best options for a root filesystem hosted on SSD under Linux

  - by stsquad

  I'm working on an embedded system which is going to be booting and hosting it's rootfs on an SSD disk. We are currently looking at using Intel X-18M SSDs. The file system structure will have a fairly static /usr section (modulo software upgrades) and an active /var and /var/log for maintaining state and logging. Given the wear-levelling done by the underlying flash does having separate partitions help or hinder? As modern SSDs appear as straight block devices and hide their mapping magic behind their firmware is there any point trying to optimise the choice of file-system that sits on-top of the SSD? Finally does enable SMART monitoring make any sense in this context or are their SSD specific ways of determining the underlying health of the storage hardware?

  Read the article

• Windows 2003 shutdown instead of reboot

  - by The_cobra666

  Hi all, I've got a very strange problem. On the net I can only find problems with Server 2003 pc's, that reboot instead of shutting down, but in my case... (go figure) it does the opposite. When I choose to reboot, the system shutdown. Yes I am sure I used the reboot button. It happens via start == reboot and it happens when clicking on the reboot button when the update's have been installed. Nothing changed to the system's hardware. Only update's have been installed on the system. I did notice something odd in the logs when rebooting: Description: Timed out sending notification of target device change to window of "C:\WINDOWS\Explorer.EXE" KB: http://support.microsoft.com/kb/924390 They talk about a removable drive, but in my case, it's explorer.exe :s it appears 4 times. OS: Windows Server 2003 R2. Services: AD, DNS, DHCP, WSUS. Thanks in advance! Greetings from Belgium Shane

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• How to generate a round-numbers graph in Excel?

  - by tcheregati

  folks! Now, I have an Excel file with measurements I made of some color patches (I work at a Press company), with a device called spectrophotometer. Here it is: https://docs.google.com/open?id=0B0i8fdSf2ihzRlFYNWd4anItenM Density and Hue are two characteristics of each color patch. The thing is: I'm looking at a non-linear increase between the 25 Color Density measurements I took, but I NEED to know exactly how the color's Hue changes as the color's Density increases. For that, I needed Excel to give me round numbers for the X axis (for example 0,70 to 1,50 in 0,05 increments). And for that, obviously, I needed Excel to calculate the probable Hue Values corresponding to those ghost/round/not-given values of Density (like a kind of advanced rule of three). So, can anyone help me on that? Thanks a lot!

  Read the article

• Post Error, Fixed/Removable Media Error

  - by Dan

  Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

  Read the article

• 8021x wireless clients auto connect prior to user login

  - by JohnyV

  I am using a 2008 r2 dc that also performs Radius (NPS), I also have a 2008 r2 certificate authority which is giving out certificates. The computers are getting the certificate and when a user logs into the device (that has previously logged in) gets put on the correct VLAN (according to there user access). However I cant get the computers to join the wireless network prior to logging in, so that they can log in with their domain accounts and authenticate through the wireless. The basic setup is Computer gets group policy which tells it to get a certificate the computer then has a seperate vlan to join just as a computer account however the wireless computer wont connect through that vlan. (this vlan allows login information only then once the users credentials are verified it puts them onto another VLAN). So I am trying to work out why the notebook wont auto connect to the wireless network as a computer. Thanks

  Read the article

• Accidentally replaced the partition table using GParted in UBUNTU

  - by claws

  Hello, This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space. Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. But I don't know how? Can any one kindly tell me how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!!

  Read the article

• Homework with allocate subnet IP address

  - by Don Lun

  I'm having difficulty solving a subnet allocation homework problem. Assume that a university has an address block 128.205.224.0/19. It has to allocate addresses for 2 departments' networks, each of size 1800, and for 4 offices, of sizes 550, 600, 650, and 750 nodes respectively. Assuming that the university network allocates addresses sequentially from the beginning of the allocated allocated address space, what are the prefix allocations for these subnetworks? I first thought in this way: There should be 6 subnets in the network. So I need 3 bits for the subnets. So 3 + 19 = 22 bits should be the network bits. Then there are only 10 bits left. 2^10 = 1024 < 1800, so this cannot work. Could you guys give me a hint or some thoughts for solving this problem?

  Read the article

• reiserfsck --rebuild-tree failed: Not enough allocable blocks

  - by mojo

  I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

  Read the article

• Who moved this PC here aka Locate which port on switch a PC is plugged into

  - by ggonsalv

  The catch is you have no SNMP access, not even public. The end vision is locate a PC in building easily even if PC's are moved around. The MAC address of the PC is known and the software would run as client on each desktop, reporting back which port the PC was plugged into. Well from a programmer perspective, my network skills are not the best. Yes I could use SNMP, download the MAC port table, load it into SQL, match it to the PC name. Seems alot of work. Lets say I ping a single point from the PC. Would the echo have some thing unique for each device on the same switch? All I need to identify some thing unique for each PC plugged into each port. If the PC was moved from location A to a different location then the unique response would change.

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• What linux permissions are need for www?

  - by Xeoncross

  I know that 777 is full read/write/execute permission for owner/group/other. So this doesn't seem to be needed as it leaves random users full permissions. What permissions are need to be used on /var/www so that... Source control like git or svn Normal users in a group like "websites" or added to "www-data" Servers like apache or lighthttpd And PHP/Perl/Ruby can all read, create, and run files there? If I'm correct, Ruby and PHP scripts are not "executed" directly - but passed to an interpreter. So there is no need for execute permission on files in /var/www. Therefore, it seems like the correct permission would be chmod -R 1660 which would make all files shareable by these four entities all files non-executable by mistake block everyone else from the directory entirely set the permission mode to "sticky" for all future files Is this correct? Update: I just realized that files and directories might need different permissions - I was talking about files above so i'm not sure what the directory permissions would need to be.

  Read the article

• Help with running crontab from root

  - by user242065

  Im using OSX and having trouble getting a cron job to run. I type the following: $ sudo -i $ crontab -e I then enter: * * * * * root ifconfig en0 down > /dev/null 0 19 * * * root ifconfig en0 down > /dev/null 0 7 * * * root ifconfig en0 up > /dev/null and no success, the first line is for testing. I want it to shut off my internet. The next two lines I plan to leave in, once I get this working. If I type this in to the terminal the internet goes off ifconfig en0 down Why is my cron job not shutting down the internet? FYI: This is a follow up question from http://stackoverflow.com/questions/3027362/how-can-i-write-a-cron-job-that-will-block-my-internet-from-7pm-to-7am-so-i-can most of the comments there are people making fun of me. And a few attempts to solve the problem with out cron jobs.

  Read the article

• Merging multiple versions of same excel spreadsheet

  - by GrinReaper

  So here's the situation: I have multiple versions of the same spreadsheet-- each one has the exact same row and column labels. The difference between any two given spreadsheets is that data in one spreadsheet shouldn't be in the other (but sometimes it might.) Is there anyway to merge all of them into a "master copy" (or just a blank version) of the spreadsheet? (basically, using the data from various versions of that worksheet to fill out the main one) Copy-pasting is extremely tedious, and doesn't allow me to copy blocks of rows IF the row numbering is non-contiguous. (For example, Rows 1, 2, 3, 6 are in a block, but row 4 and 5 just don't exist.) Ideas? Googling hasn't turned up anything that seemed directly relevant to this problem.

  Read the article

• Rate-Limit affects All clients or single IP?

  - by Asad Moeen

  Well up-til now I've considered iptables rate-limit commands with the "recent" module to work for each IP Address. For example rate-limit rule of 20k/s will trigger only if a single IP exceeds 20k/s rate and not if 4 different IPs exceed 5k/s rate. Please correct me if I considered this wrong as I've only used these rules for TCP/ UDP. But today I tried similar rules for ICMP and applied 4/s Input/Output. But then on trying to ping-test from just-ping.com I could see packet loss on almost all IP Addresses. How could that happen because if it worked for each IP Address then it wouldn't be triggering the rule because I believe each IP from just-ping has a rate of probably 1/s. I still think the first one is true because if it wasn't then my GameServer would block everyone if the combined rate ( in case of more connected players ) increased the threshold. This hasn't happened up til now so the ICMP thing really confused me. Thank you.

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >