Search Results

Search found 11512 results on 461 pages for 'usb mass storage'.

Page 401/461 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

  • Debian Linux bridging router intermittently dropping packets [migrated]

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

    Read the article

  • Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD because of CD only drive.

    - by studiohack23
    Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD in the drive because it only supports CDs as I found out after the fact. I'm a complete novice @ servers, so if you need more detail, let me know, and I'll try to provide it. This server is around 4-6 years old. it has "PXE" boot, not sure what that means? This particular server has 3 RAID hard drives. As far as I know, they have all been wiped. I looked up the service tag on Dell, and it has: Compact Disk Drive, 650M, I Internal, Half Height, 48X, BlackHitachi LG Data Storage as its CD drive. Thus, the CD drive does not support DVDs, so installation will have to be via a live CD. However, I'm trying to put Amahi Home Server (http://www.amahi.org/), and Live CD/USB stick installs are not recommended unless one is an expert Linux user. any suggestions as to how to get around this? PROBLEM SOLVED! THANKS for all the help!

    Read the article

  • Downmix ALL SYSTEM audio to mono - Windows 7

    - by Mike K.
    I'm deaf in one ear and want to use my headphones when playing a game and talking with my friends on Skype/TS/Mumble/etc while also sometimes listening to music. I need ALL my system audio to be downmixed to mono so that my ONE hearing ear gets ALL audio channels instead of split stereo audio. No, none of the other similar questions on superuser have a solution. My headphone properties does not have a 'Mono' option, I don't have a 'Headphone Virtualization' option, and my Realtek HD audio driver software doesn't have these options either (driver was updated 11/14/2012). Don't even talk about setting the balance of one side of the headphones to 0. You're not paying attention if you suggest that. JACK and Virtual Audio Cable didn't work. It's possible I configured them wrong, but I followed the steps I found in related questions and still got split stereo out. TL;DR I need a viable, working, software solution (I say software because I have a USB headset) for forcing ALL system audio to mono so that I can hear literally everything through the one earpiece. Thanks!

    Read the article

  • Audio card with built-in ground isolator?

    - by Dave Jarvis
    What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

    Read the article

  • Should I persist images on EBS or S3 ??

    - by enes
    Hi; I am migrating my Java,Tomcat, Mysql server to AWS EC2. I have already attached EBS volume for storing Mysql data. In my web application people may upload images. So I should persist them. There are 2 alternatives in my mind. 1- Save uploaded images to EBS volume. 2- Use S3 service. The followings are my notes, please be skeptic about them, as my expertise is not on servers, but software development. EBS plus: S3 storage is more expensive. (0.15 $/Gb 0.1$/Gb) S3 plus: Serving statics from EBS may influence my web server's performance negatively. Is this true? Does Serving images affect server performance notably? For S3 my server will not be responsible for serving statics. S3 plus: Serving statics from EBS may result I/O cost, probably it will be minor. EBS plus: People say EBS is faster. S3 plus: People say S3 is more safe for persistence. EBS plus: No need to learn API, it is straight forward to save the images to EBS volume. Namely I can not decide, will be happy if you guide. Thanks

    Read the article

  • Windows XP consuming drive letters

    - by billdehaan
    This one's a bit of a stumper. I'm running XP SP3, current with all fixes, etc. My problem is that I can assign a drive letter to a container file (explained below), it works just fine. But once I close the container, the drive letter is no longer available until the next boot. I've got some confidential data that I've placed in a container volume. I've used TrueCrypt (www.truecrypt.com) and FreeOTFE (www.freeotfe.org), with both installed and portable versions for both, with the same result. I open the container file, assign it to a drive letter (say R:), and run some portable apps that are within the volume. When I'm done, I close the container, and the drive letter is released. Fine so far. However, when I attempt to re-open it, the previous drive letter (in this case R:) is no longer available. It's not mapped to anything, it's just unavailable. Even attempting something like "subst R: C:\" returns "Invalid Parameter - R:". I can use the S: drive, no problem, but the next day I have to use T:, then U:, etc. Eventually, I have to reboot to reclaim all of of the drive letters. Unfortunately, everything I've read about drive letters relates to USB assignments, which doesn't apply here. I've tried the "show hidden" command (set devmgr_show_nonpresent_devices=1) with no success. And the Disk Management tool doesn't apply either, since it's not a physical drive. Does anyone know where Windows keeps the list of drive letters? And is there anything short of a reboot that can be used to reset it?

    Read the article

  • Error when attempting to do a differential or incremental backup of Exchange using ntbackup

    - by voon
    Hi folks, We're running Small Business Server 2003 here. I was reviewing our backup procedures lately and noticed in the ntbackup logs that the differential backups of Exchange were failing with the error: (SERVERNAME)\Microsoft Information Store\First Storage Group is not a valid drive, or you do not have access. A quick search of google found this MS KB article: http://support.microsoft.com/kb/555613 However, both of the suggested fixes don't to apply to our problem. First solution is to make sure the backup media is formatted and has adequate space. Well, our backup target is a 1 TB external hard drive with about 600 gigs of free space. (A full backup of our Exchange DB is currently around 5 GB) The second suggested fix is to "perform a full backup before trying to do incremental". And again, that can't it because we are doing full backups twice a week. There are no errors in the application log, just entries for ntbackup starting and ending. I've also tested doing an differential & incremental backup onto the server's internal drive, which unsurprising still did not work. I could get around this problem by always doing a full backup of Exchange but I kind of like the idea of being space efficient with doing differential backups. Anyone got any ideas?

    Read the article

  • Inter-VLAN Malicious Code Scanning

    - by Jackthedog
    I am trying to find an inbuilt solution on a Cisco Catayst 3750X Switch to scan all traffic routed from one VLAN to another for malicious code. The situation is that we currently have a development environment which is currently being redesigned to upgrade the network infrastructure to use the 3750X switches to manage server and workstation connectivity as well as inter-VLAN routing. We also have another system that is responsible for taking the builds created on the development environment and imaging various HDDs. Because these are two separate systems, we have a requirement in the workplace to anti-virus scan any data transferred between these systems. This is done by copying the data from the originating system to external USB HDD, scanning in a standalone workstation and then copying the data on to the receiving system. As you can imagine this is extremely tedious and impractical most of the time... (I don't make the rules). Anyway, with this redesign going on, we would like to join the imaging system to the network infrastructure of the development system, keeping separation by the use of VLANs and restricting traffic by using ACLs. As we still have the requirement to scan all traffic I would like to configure some sort of malicious code scanning when ever traffic is routed between these VLANs. I am aware I could install a separate in-line IPS/IDS device, however both systems will be using multiple ports on the switch (obviously), and we won't be able to put a device on each port. I would would prefer not to add additional hardware if the 3750x switch is capable of doing the job. Is anyone aware of any Cisco solution that I could use here, that ideally can be incorporated into the 3750x switch? Thanks in advance.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by Develop7
    Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by develop7
    Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Why my hard disk can't boot from the BIOS?

    - by Mario
    I installed a new sata DVD burner. When I turned on the machine (windows 7) it didn't boot. It can boot from a lubuntu CD. There is an option on lubuntu to boot form the first hard disk. If I select it, the machine boots normally to windows 7. So from the CD I can boot but not from the BIOS. I checked all the options more than once: boot from HD, not boot from removable, boot from USB, boot from optical. The order of the boot sequence is HD then DVD. I tried booting only with the HD; I disconnected both DVDs. I even tried recovery of the MBR: bootsect, bootrec, fixmbr, buildbcd, nt60, etc. So, the question is, does this have a reason, what's the difference between booting from the BIOS (as I think) to from the DVD?. The BIOS is intel, it has BIOS codes on the right bottom corner, it stays at 5A for a while. 5A is "Resetting PATA/SATA bus and all devices".

    Read the article

  • Overclock Failed

    - by John
    This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

    Read the article

  • Improving abysmal 802.11n wireless network

    - by concept
    I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

    Read the article

  • LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

    - by Michael Pearson
    We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

    Read the article

  • How to create VHD disk image from a Linux live system?

    - by Federico
    Once more, I have to resort at the experts here at SuperUser, as my other sources (mainly Google ;-)) didn't prove very helpful... So basically, I would like to create a VHD image of a physical disk to be archived/accessed/maybe even mounted in a virtual machine. Now, there are dozens of articles and tutorials on how to do that on the web, but none that meets exactly the conditions I would like to achieve: I would like the destination file to be a VHD image, as Windows 7 can mount it natively, even over the network and many other programs can use it (VirtualBox, ...) The disk I'm trying to image contains a Windows XP install, so in theory, I could use the disk2vhd utility, but I would like to find a solution that doesn't require booting that Windows XP install (ie keep the disk read-only) Thus I was searching for a solution involving some sort of live system (running from a USB stic or the network) However, all the solutions that I've came across either make use of disk2vhd or use the dd command under linux, which does a complete copy of the disk (ie even empty blocks) and does not output a VHD file. Is there a tool/program under Linux that can directly create a VHD file? Or is is possible to convert a raw disk image created using dd to a VHD file, without allocating space for the empty blocks? How would you proceed? As always, any advice or comment is highly appreciated!!

    Read the article

  • Diagnosing linux issues with ipod syncing in Ubuntu

    - by alexpotato
    Issue: I am currently using Ubuntu 9.10 with a 5th generation Ipod 60 GB Black video classic. In general, it seems that Ubuntu can always detect the usb hd and displays it on my desktop. However, some applications seem to detect the ipod (e.g. Rythymbox and gtkpod do but Banshee does not) and some don't. I narrowed down the banshee issue to a bug that requires Nautilus to be restarted (although it would be nice to not have to do this). Also, Whenever I sync between these applications, it appears that everything is working fine during the sync but when I disconnect the ipod and browse, all of the songs seem to be there but the playlists are not. If I reconnect the ipod, in banshee specifically it sees the space usage as "other". What I am looking for is some way to at least understand what is and is not working OR directions to some where that can help me learn what's going on. I have already tried: -IRC. Either the channel is too general (e.g. #ubuntu) or no one is ever one (e.g. #banshee) -The web. Most of what I've found is too specific to one particular bug or too general. Any thoughts?

    Read the article

  • Raid-5 Performance per spindle scaling

    - by Bill N.
    So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

    Read the article

  • Laptop will not boot

    - by WillumMaguire
    This is a dell studio 1558 laptop. Now, something is wrong with the charger that it won't charge the laptop, but the laptop can turn on and operate properly as long as it is attached. It has been like this for a while, but it's not the problem. My problem is that as of yesterday, It takes several minutes to get past the "dell" startup logo (where is says "f2 setup" and "f12 boot options"). After it gets past, it beeps as normal to tell me about the charger and gives me the f2/f12 options and f1 to continue as normal. I can press f12 to get into boot options and load into my live USB BackTrack 5 ISO, but after "startx" it just stays at a black screen. I can also access BIOS setup, but see nothing that would help the problem. When I boot to the HDD, it gives me this Intel UNDI, PXE-2.1 (build 083) Realktek PCIe GBE Family Controller Series V.2.29 (06/30/09) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM Operating System not found Also, pressing f8 gives me the same results as booting as normal. It is running Windows 7 Ultimate, dual-core Intel i3 @ 2.27ghz and 4gb RAM. I think there is an issue with the HDD, as the "Operating System not found" would lead me to believe. Is this a fixable problem?

    Read the article

  • Computer won't boot from a bootable DVD

    - by JohnB
    My friend gave me his old computer that used to have WinXP on it. I'm trying to load Win7 on it and I thought there was something wrong because it wouldn't boot off a bootable disc, even though I setup the BIOS boot settings properly (I've done this sort of thing a million times). However, this closely related post helped me realize that I can boot off a bootable CD (WinXP), just not a DVD (Win7) Computer won’t boot from CD/DVD drive That might be the answer to my question, however, this motherboard is still pretty current technology. It's a good quality Gigabyte board, and judging from this product page, it came out in 2004. If I can't figure out a solution to my DVD boot problem, I'll have to try something like this: Boot and Install Windows from a USB thumb drive I guess it's possible that this motherboard doesn't allow booting from a DVD, but I still think that I might be missing something. It wouldn't be the DVD rom drive would it? I did try another drive and had the same results. However, I didn't try booting a DVD in the computer that the other test drive came out of, I'll do that later today. Any other advice? Thanks.

    Read the article

  • Streaming to PS3 with NAS and built-in dlna server?

    - by philt
    With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

    Read the article

  • How to connect a VM running on an ESXi host to that host via a VMKernel NIC?

    - by Zac B
    Say I have an ESXi (5.0) host that runs a Linux distribution which hosts iSCSI targets, which contain the images for other VMs which the host will run. When it's used, I'll start the host first, then the iSCSI server, and then refresh all storage targets/HBAs in order to see the provided shares as online. I know it's a strange puzzle-box solution, but I was told to implement it. The ESXi host itself has a gigabit NIC which connects to the outside world. The guest OS (CentOS) supports VMXNet3, however, and if I can, I'd like to use its VMXNET3 NIC to host iSCSI for the ESXi host. How should I go about doing this? I went to create a new virtual network, and selected "VKernel", as it suggested that I use that type of network for SAN traffic, but it is apparently not set up for "self-hosted" SAN hosts, as the new network did not appear as an option to attach the CentOS box's VMXNET3 NIC to. How should I best connect an iSCSI host out to its "parent" ESXi host, if I need a) a 10gb connection, and (optionally) b) a VMKernel network for it?

    Read the article

  • Disable write-protection on Micro SD

    - by Tim
    My task today is to open up and copy some files to 700 brand new micro SD cards. As I get going on this task I am finding that some of the Micro SD cards are telling me "sorry this drive is write protected" To copy the files I am using a standard SD to micro SD card adapter, and a USB SD card reader / writer. I have ensured that the switch is set to OFF on all of my adapters. As soon as I get a Micro SD that tells me it is write protected I can use the same adapter with another micro SD and it works fine, so I know the problem is not with my adapters. My question is: How can I disable the write protection on a Micro SD card? This eHow article seems to indicate that there is also a physical switch on Micro SD cards. However I have personally never seen a Micro SD with a physical switch, and none of the ones I am using today have said switch. Since these cards are brand new and thus empty are the ones that are telling me they are write protected simply useless? Could this be caused by some sort of defect in the cards?

    Read the article

  • Linux Mint 13 is not booting on dual boot computer

    - by Brian
    thanks in advance for your time. I have 2 hard drives in my computer a 300 GB drive which is my primary drive for windows 7 and a 1.5 TB drive that I'd used for storage. When I got it I partitioned 500 GB for use in Linux. So, I created a bootable USB and clicked the "Install by Current Operating System" option from Mint. It installed it to the free 500 GB like I'd hoped it would. Now, I can't get it to boot though. I've tried using EasyBCD to create the boot entry and it hangs on a black screen. Thanks. EDIT @ Ryhuk It presents a menu with two options 1) Windows and 2) Mint. This was a menu I created with easyBCD. When I select option 1 it boots to windows fine. When I select option 2 it hangs on a black screen with just a white bar flashing (Can't remember what its called, it marks the current cursor location on a text field) and won't respond to any key presses but alt ctrl del.

    Read the article

  • Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

    - by varesa
    I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

    Read the article

  • OS X Hard drive recovery

    - by Adam
    I am trying to recover data from a bad Seagate 1TB hard drive in a 2010 iMac. One day the iMac wouldn't boot (stuck at gray screen on startup). I removed the hard drive from the iMac and connected it to a MacBook using a 3.5" HDD to USB adapter. The hard drive wouldn't mount but it did display in Disk Utility that that there were 2 partitions on the disk. I tried to run Disk Warrior and it showed thousands of errors but still wouldn't mount. At this time the hard drive only show one partition in Disk Utility. Next I tried putting the hard drive in a desktop PC and running Spin Rite - which then gave me several division overflow errors (even with running Spin Rite with a newer version of DOS). The SMART status on the drive reports that the drive has had failures and HD Tune referenced the drive had once hit 59 degrees celsius. Disk Utility gives me the following message when running a pair: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Overall, the hard drive spins up and sounds OK - there are no clicking noises but the hard drive won't mount and displays as a light gray "Macintosh HD" in disk utility. Any tips or advice on how to recover data on this drive would be GREATLY appreciated! Are there any other tools I can try before calling it quits on this drive? Thank you

    Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >