Search Results

Search found 11512 results on 461 pages for 'usb mass storage'.

Page 404/461 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

  • Desktop virtualization

    - by gurpal2000
    Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

    Read the article

  • Use Alladin eToken with ThunderBird and other tool

    - by Yurij73
    I'm looking for an example on how to setup the eToken PRO Java device to work with Mozilla Thunderbird and with other Linux tool such as PAM logon. I installed distributed pkiclient-5.00.28-0.i386.RPM from the official product page eToken Pro but that tool only handles importing/exporting certificates on the device. I read a glance an old HOWTO from eToken on Linux, but I couldn't install pkcs11-lib for this device as recommended for Thunderbird use this crypto device. It seems my usb token isn't listed in system, unless lsusb show it, so that is the matter modutil -list -dbdir /etc/pki/nssdb Listing of PKCS #11 Modules NSS Internal PKCS #11 Module Blockquote slots: 2 slots attached Blockquote status: loaded Blockquote slot: NSS User Private Key and Certificate Services Blockquote token: NSS Certificate DB Blockquote CoolKey PKCS #11 Module Blockquote library name: libcoolkeypk11.so Blockquote slots: 1 slot attached Blockquote status: loaded Blockquote slot: AKS ifdh [Main Interface] 00 00 token: is my token absent? on other hand i don't know which module is convenient to Java Pro, does CoolKey does all the job well? It seems Java token is too new hardware for Linux? there is excerpt from /etc/pam_pkcs11.conf #filename of the PKCS #11 module. The default value is "default" use_pkcs11_module = coolkey; screen_savers = gnome-screensaver,xscreensaver,kscreensaver pkcs11_module coolkey { module = libcoolkeypk11.so; description = "Cool Key"`

    Read the article

  • Better approach to archiving large amounts of original video footage using optical media (DVD/Blu-ra

    - by Rob
    This question is to share my experience as well as ask for suggestions for better methods. Along with 2 friends, I completed the making of a short documentary film in 2006. Clip is at: http://www.youtube.com/mediamotioninvision The film was edited in Adobe Premiere Pro 1.5 on Windows XP. More details and screenshot here: http://www.flickr.com/photos/smilingrobbie/1350235514/ ( note this is not intended to be a plug, we've moved on from this initial learning curve project ;) ) The film is in 4:3 standard definition 720x576 PAL format. As well as retaining the final 30minute film, I wanted to keep all original files that assembled together to make the film. The footage was 83.5Gb So I archived them to over 20 4.7Gb DVD recordables in the original .avi format (i.e. data DVD-ROM format, NOT DVD-Video Mpeg2) Some .avi DV video files were larger than 4.7Gb so I used 7-zip to split them ( here is a guide as to how to do that: http://www.linglom.com/2008/10/12/how-to-split-a-large-file-using-7-zip/ ) To recombine them, a dos shell command like this would do that: copy /b file.avi.* file.avi would do the job, where .* is a wild card to include all the split parts e.g. 001, 002...00n assuming they are all in the same directory path folder. file.avi is the recombined file identical to the original. Later on, I bought a LG BE06 LU10 USB 2.0 Super-multi Blu-ray burner and archived the footage to 2 (two) x 50Gb BD-R DL discs. Again in the original format, written as files to a BD-R in the BD-R BD-ROM UDF format readable by PC/Mac etc, NOT Blu-ray video/film format. This seems to be a good solution for me, because: the archive is in a robust, reasonably permanent, non-volatile medium, i.e. DVD recordable / Blu-ray (debates about stability of optical media organic chemical dye compounds/substrates aside) the format of the archive is accessible by open source tools or just plain Windows Explorer and it's not in a proprietary format I just thought I'd ask folks for their experience on better methods, if such exist.

    Read the article

  • Where to get grub files without using grub-install

    - by Jacky
    I am in a particular situation. I have a MacBook Pro with no internal CD drive and both MacOS X (minimal setup) and Linux (my main system) is installed. During a cross-upgrade to Ubuntu 12.04 I messed up grub, so that my /boot/grub directory is basically empty. This means I can't boot Linux on the laptop anymore but only get into grub rescue. Normally this is no issue as you'd just boot from a rescue CD or USB stick, but unfortunately with a MacBook Pro this is not possible (I have reFIT installed and it attempts to boot, but it fails and the manual says that Apple's EFI firmware is not able to handle this situation). From MacOS X, however, I still have write access to the Linux partition. I've now been trying to figure out how to populate the /boot/grub folder with the necessary files, to no avail so far. The ISO image of Ubuntu 12.04 contains an EFI folder which is not what I am looking for, instead I need the normal.mod files for the grub version of Ubuntu 12.04. I do not have any other machine to set up a virtual machine of Ubuntu 12.04 to extract this from after a grub-install, so I am asking for ideas here how to solve this mess. P.S.: I installed the Linux previously when I still had a working internal CD drive. This is gone now.

    Read the article

  • Volume licenced copy of MS Office 2007 shows "Non Commercial Use" in title bar

    - by Linker3000
    I have just removed the demo copy of Office 2007 preinstalled on a new laptop and replaced it with an install of the full professional edition downloaded from the MS Volume Licensing site and installed one of our volume licence keys, yet the apps (Word etc.) show "Non Commercial Use" in the title bar, which is what usually happens in the Home and Student edition. I have tried: Deleting the Office registration keys in the registry and using one of our other Office 2007 volume licence keys (we have 7) when prompted to re-register Uninstalling Office completely and reinstalling it from a newly-downloaded ISO burned to CD and also from a compressed file that installs from hard disk/USB stick (both from Microsoft - no dodgy stuff) Yet the non-commercial message persists. Although it's a cosmetic issue, the laptop is going to be used for customer presentations and so the sales person is rightly concerned about the image this portrays. I presume there may be something floating around the registry or in a file somewhere but I can't find it. Articles I have found elsewhere just refer to the message being related to the use of a Home and Student licence key, which is 100% not the case. Any thoughts? Thanks.

    Read the article

  • Lenovo L440 won't boot into Debian installation CD or Debian-installed HDD

    - by Spencer B Liberto
    I have a Lenovo L440 and a Lenovo X61. I want to install Debian Wheezy on thee L440. This morning, the L440 could successfully boot into Windows 8 from it's hard drive. I created an installation of Wheezy on a USB flash drive with Unetbootin. I created an installation CD of Wheezy with Unetbootin. The X61 can successfully boot into the flash drive. The X61 does not have a CD drive. I have attempted to boot from the live CD and the flash drive from the L440's boot menu. In both cases, the screen fades to black, and then returns me to the boot menu with no error message. I removed the L440's hard drive, and installed it in the X61. I then successfully installed Wheezy onto the hard drive from the flash drive. I'm able to boot into the Wheezy hard drive on the L440. After replacing the hard drive into the L440. I booted from the hard drive from the boot menu. Once again, the screen fades to black, and then returns me to the boot menu with no error message. What's the deal?

    Read the article

  • Optimal file system type and mount options for an rsnapshot dedicated drive

    - by Nimmy Lebby
    We have an external USB 2 drive that we are using as a backup drive for our configuration. We use rsnapshot for the backups. It uses a few standard commands for managing snapshots: rm -rf: deletes expired snapshots mv: moves older snapshots down a slot cp -al: duplicates last snapshot to new slot rsync -a --delete --numeric-ids --relative: synchronizes new snapshot As you could see by the log below, the majority of the time is spent on the rm -rf and the cp -al steps: [25/Dec/2010:14:00:02] rsnapshot hourly: started [25/Dec/2010:14:00:02] echo 21012 > /var/run/rsnapshot.pid [25/Dec/2010:14:00:02] rm -rf /mnt/extdrive/snapshots/hourly.5/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.4/ /mnt/extdrive/snapshots/hourly.5/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.3/ /mnt/extdrive/snapshots/hourly.4/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.2/ /mnt/extdrive/snapshots/hourly.3/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.1/ /mnt/extdrive/snapshots/hourly.2/ [25/Dec/2010:14:15:48] cp -al /mnt/extdrive/snapshots/hourly.0 /mnt/extdrive/snapshots/hourly.1 [25/Dec/2010:14:23:32] rsync -a --delete --numeric-ids --relative /etc /mnt/extdrive/snapshots/hourly.0/sm4/ [25/Dec/2010:14:23:52] touch /mnt/extdrive/snapshots/hourly.0/ [25/Dec/2010:14:23:52] rm -f /var/run/rsnapshot.pid [25/Dec/2010:14:23:52] rsnapshot hourly: completed successfully My questions: I'm currently using ext4 for the filesystem. Maybe this is not the best choice from those available in Red Hat. Anyone have any recommendations that would speed up the process? The partition's mount options are sync,dirsync 1 2. Is there a way to optimize this since it's solely used for rsnapshot? Of course, reasoning would be greatly appreciated.

    Read the article

  • What's the lowest cost, legal, Microsoft server stack you can assemble?

    - by McKAMEY
    Assuming that you have an app infrastructure that generally only requires: ASP.NET MVC / C# / .NET Database or NoSQL data store (must be accessible from C#) Here's the challenge to you server gods: What is the least expensive configuration that will allow you to deploy to production in a way that doesn't break any licensing rules? In what ways does this solution differ from the "standard" Microsoft deployment scenario? Where does this solution's performance break down once the app begins to scale? I'm not concerned about the hardware, only the server software itself. I would love to hear about any solutions you've personally put into production. Especially if they are unique alternatives. For ideas, consider some of the possible variations, a) any Microsoft server solutions where they have lowered the barrier to entry to compete with OSS, or b) any OSS alternatives to Microsoft products which perform at a similar level. An example of a): SQL Server 2008 Express Edition SP1 is a 100% free version of SQL Server which will scale to the needs of many smaller / early stage applications. An example of b): running the Mono Framework on Linux. An example of differing from the "standard" stack: running Mono on Linux will require a completely different server OS familiarity. None of the Windows-based knowledge really transfers. An example of breaking down under scale: SQL Server Express will only scale to 1GB of memory and 4GB of disk storage. After that point, the application will need to move to one of the paid versions of SQL Server.

    Read the article

  • Verizon 4G LTE vs. a LAN

    - by n8wrl
    I have been having quite a bit of trouble getting my new Verizon 4G-LTE service running on a Windows 7 desktop. My desktop is on a LAN here at home with two other PC's. We all share printers, files, media, etc. Until yesterday, we also shared a Verizon 3G modem via a NetGear 3G broadband WAP. That isn't compatible with the 4G so now I am just trying to get the 4G modem working directly connected to one of the desktops. After some USB wrangling, it seems to work. Except, every 7-10 minutes the connection would drop. After some time on the phone with a very nice Verizon technician, it seems to be staying up - it's been up for 20 minutes now. He told me that my LAN was causing the 4G to drop. That traffic on my LAN, even though it is not destined for the internet (ICS not working yet) was causing the cell tower to detect an 'IP change' and a 'security violation' in my modem and drop my connection. Is this Verizon's way of forbidding more than one computer to share a modem? I have my computer running now without a LAN connection and the 4G is still up. But this isn't practical. Has anyone heard of this?

    Read the article

  • Recovering a damaged microSDHC

    - by djechelon
    I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

    Read the article

  • AWS document on number of databases allowed on an Amazon RDS instance

    - by user35042
    At the Amazon RDS FAQ there is the question "What is a database instance (DB Instance)?". The entire answer (as of mid-June 2012) is: You can think of a DB Instance as a database environment in the cloud with the compute and storage resources you specify. You can create and delete DB Instances, define/refine infrastructure attributes of your DB Instance(s), and control access and security via the AWS Management Console, Amazon RDS APIs, and Command Line Tools. Multiple MySQL databases or SQL Server databases (up to 30) or Oracle database schemas can be created on a given DB Instance. The last part of that quote, "Multiple MySQL databases or SQL Server databases (up to 30) Oracle database schemas" I interpret to mean that you can have an "unlimited" number of databases on an RDS MySQL or Oracle instance but only 30 databases on an MS SQL Server instance ("unlimited" meaning not limited by the RDS infrastructure itself). This was asked in the Stackoverflow question Does Amazon RDS support multiple databases per instance?. The answer quoted an older version of the FAQ. What I am looking for is an Amazon document that clarifies this question, or else someone who has experience using Amazon RDS who can attest what the situation actually is.

    Read the article

  • Formatting an external HDD stuck at 70%

    - by mahmood
    My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

    Read the article

  • BSOD during Cygwin install

    - by Mike Pennington
    I have been running Cygwin (1.7.7) under Windows Vista 64-bit, SP2 for at least a year, and had no problems with my installation at all until today. When I tried to install apt-cyg, I realized that I needed to get the svn client. During the installation of the package dependencies, Vista threw a blue screen of death. I hoped this was a one-time occurrence, so I rebooted into Vista and tried to install svn again; same result. Next I completely removed Cygwin's directory, and all Cygwin registry entries; at this point, I tried reinstalling the base Cygwin system again. During the installation of bash, I got another BSOD: Apologies for the fuzzy pic, I had to shoot with my phone camera. I googled for BSOD and Cygwin and found a post by Dave Korn mentioning that the only reasons Cygwin should cause a BSOD is because of either ioperm.sys or some USB utilities. I have neither on my system. Every time I have tried reinstalling, Vista BSODs; I have not had problems installing any other software packages on this Vista machine. How can I get Cygwin installed again (without reinstalling Vista)?

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Exchange MSExchangeIS Mailbox Store Error

    - by Bart Silverstrim
    Boss asked me to check to see if I could figure out why he's had to restart the services on the Exchange server three mornings in a row now. While going through the system logs I ran across an error from the MSExchangeIs Mailbox Store, category General, Event 9690. The message said (edited to make generalized): Exchange store 'First Storage Group\Mailbox Store (Servername)': The logical size of this database (the logical size equals the physical size of the .edb file and the .stm file minus the logical free space in each) is 22GB. This database size has exceeded the size limit of 22 GB. This database will be dismounted immediately. Hmm...happened at five in the morning, and I'm thinking this is a pretty good hint that this leads to the culprit. Thing is I'm not an Exchange expert, so I'm still googling around to figure out how to fix the problem. Any better guidance out there? Or am I barking up the wrong binary tree? Exchange System Manager reports that the server is "version 6.5 build 7638.2, SP2", standard, which I believe is Exchange 2003. It's running on Windows Server 2003 R2 Standard, SP2.

    Read the article

  • How can I find files added to the system within X minutes of a specific time?

    - by Jack W-H
    I have done a fresh install of Mac OS X Mountain Lion today on a new MacBook. Because this was a new install, when I finally got round to configuring some of my own developer things, I was surprised to find some app had installed a binary into /usr/local/bin - a single binary called galileod. Interestingly, I can't find anything online about galileod. I had only installed the bare minimum of software at this point. Looking in the file columns I can see Date Modified was 9th November 2012, but Date Added to the system was today at 17:01. It's now 10:20PM and I can't remember which software I was installing at that point. So how do I find out which other files were installed to the system within, say, 5 minutes either side of 17:01? EDIT: I found out what galileod was by running galileod --help - it is a binary used with Fitbit to communicate with the USB dongle. So that's the mystery solved - but it would still be interesting to know how to find files added within X minutes of a timeframe for future reference.

    Read the article

  • Somewhat powerful server needed for computationally expensive stuff

    - by Dane Larsen
    So here's my problem. My Dad runs a company that does some rather computationally expensive stuff. This is not supercomputer level stuff, but it does take several hours to run the average job on his Core i7 desktop. He asked me to look into a way to have his customers use the code on an hourly basis, namely via a server. Ideally he'd be able to buy a box for about $1000, and hook it right up to our home connection. Unfortunately, the data that needs to be both sent and received is on the order of several hundred megs. We live in a rural area, and the fastest connection offered is 1.5Mbit/s. Download. It's like .3Mbit/s upload. Not workable. What are the options for this kind of thing? Ideally, we'd have about 2GB of ram, 300-500GB of storage, and a nice dual core, and it has to run some flavor of Linux. Any suggestions? Thanks in advance EDIT: Also, ideally the monthly price would be < $100 per month.

    Read the article

  • Cannot access drive in Windows 7 after scandisk lockup, but can in safe mode....

    - by Matt Thompson
    I ran scandisk on my external USB drive due to the inability to delete a few files. Windows asked me if I wanted to unmount the drive before the scan, warning me that it would be unusable until the scan was finished, and I said yes. During the scan, my machine locked up, and I was forced to reboot the machine. When it came up, I was unable to access the drive, getting an error that "L:is not accessible, access is denied". Comupter Management sees the drive, and has the proper amount of disk space filled. I booted into safe mode, and can access the drive with no problems, and I noticed that in explorer, all the folders have locks on them. I booted back into windows, but still could not access the drive, getting the same error as above. Hovever, if I right click on the drive, select properties, and go to Customize, in the folder pictures ares, I select Choose File, and a window open up, that shows the root of the directory, with all the folder able to be accessed, but again, the icon is the folder icon with a lock on it. I can even copy files from the drive to another. So, the files are not gone, windows can obviously access the drive no matter what it thinks, so there has to be a problem with the flag windows put on the drive when it ran the original scan that failed. I was able to run a scan both in safe mode with no problems, and in windows. In windows, I received the cannot access error the first time I run scan disk on it, but if I try again, it works fine. Any ideas on how to clear the flag that windows set, so I can access the drive normally again?

    Read the article

  • Backup solution, or, how Duplicati duped me

    - by blarghmaster
    TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

    Read the article

  • SQL server agent job to execute SSIS package fails, package succeds if run manually

    - by growse
    I've got a SSIS package installed on a SQL server (SQL Server 2012). It's fairly simple and just fetches data from a remote data source and adds it into a local table. The remote connection string is using SQL server authentication, while the local connection is using Windows auth. The remote connection password is protected, and the package was imported setting the protection level to Rely on server storage and roles for access control. If I run the SSIS package manually, it works. If I run it from the command line using dtexec, it works. If I use runas to switch to the domain account that the SQL server agent is running under, and then run the package using dtexec, it works. If I create a SQL Agent job with a single step to run the package, it fails, providing very little detail as to what's going on. I'm guessing it's not able to get the password to log into the remote SQL server, because it fails very quickly. Also, if I tick 'log to table' and view the resulting file, I get the following: Description: ADO NET Source has failed to acquire the connection {0D8F2CD4-A763-4AEB-8B52-B8FAE0621ED3} with the following error message: "Login failed for user 'username'.". If I try to add the password in the connection string manually under data sources in the job step dialog, it refuses to save it, always seeming to remove the 'password' bit of the connection string. I thought that SQL server agent jobs always ran under the context of the account which the SQL server agent is running under. This account is a sysadmin on the local SQL server, and the package works using dtexec under that account, so why would it fail when trying to run as an agent job?

    Read the article

  • Will these instructions work when turning of journaling on a n ext4 SSD?

    - by snowlord
    I have an Acer Aspire One with an SSD for storage. I recently installed Ubuntu on it and chose ext4 for my filesystem. Then I read that journaling on an SSD isn't the best idea, so I will try to disable journaling and I have found these intstructions (from http://fenidik.blogspot.com/2010/03/ext4-disable-journal.html): # Create ext4 fs on /dev/sda10 disk mkfs.ext4 /dev/sda10 # Enable writeback mode. This mode will typically provide the best ext4 performance. tune2fs -o journal_data_writeback /dev/sda10 # Delete has_journal option tune2fs -O ^has_journal /dev/sda10 # Required fsck e2fsck -f /dev/sda10 # Check fs options dumpe2fs /dev/sda10 |more For more performance add fstab opions: data=writeback,noatime,nodiratime i.e: /dev/sda10 /opt ext4 defaults,data=writeback,noatime,nodiratime 0 0 I will use them on my boot partition. Are there any particularly bad parts here, or are there any missing steps? Will my boot partition be fit for being on an SSD after this? Or should I consider switching to ext2, or even reinstall it all and choose ext2 at partitioning time (I'd rather not though, since I've configured quite some stuff already)?

    Read the article

  • Is it possible to provide a wired ethernet connection to external devices with an extra LAN card?

    - by Ben McCormack
    I'm trying to provide a wired ethernet connection (wireless is not an option for this device) to a device (Samsung blu-ray player) without running Cat5 cable all over the home. I have a PC sitting next to this device and the PC is connected to the network via a wireless USB adapter. Is it possible to provide a wired connection from the PC to the wired device using the (currently unused) ethernet port in the back of the computer? Here's how I envision the device getting connected to the internet via my network: Linksys WRT54G v8 Wireless Router | ``--> Windows 7 PC connected via wireless | ``--> Blu-ray player connected via wired connection to the ethernet port on the PC. If so, how is this done? Will I need a crossover cable? What settings will I need to change in Windows 7 so that the device can connect? NOTE: I'm trying to avoid having to buy a wireless bridge and/or hacking a router with an open-source firmware to get this to work. See my previous question for more details.

    Read the article

  • Windows PE network setup

    - by microchasm
    I'm walking through the following step-by-step guide for deploying Windows 7 via AIK: http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx On step 4 (Capturing the Installation onto a Network Share), I run into a bit of a snag: attempting to connect to a network drive repeatedly fails. I'm using/deploying Dell Optiplex 380 64 bit machines, and the network cards seem to be really wonky. On the machine that I'm using to run AIK etc, the network driver wasn't found automatically. I had to manually go in and install the driver (which was found on the OEM installation media). I've since copied this to the USB key that I'm using for the Autounattend.xml so its handy. I think that because of this, the PE environment doesn't or can't instantiate the network device. Is there a way to install/configure the network device through the command prompt in PE? If not, I read about adding in the answer file path(s) to drivers, but if I did it this way, would I have to start the process all over again (i.e. create new Autounattend.xml with the PnPcustomizations path included, re-run the installation on the reference machine, install all the applications, re-make the PE iso, reboot into new PE iso)? Any shortcuts, direction, or advice would be appreciated. Thanks!

    Read the article

  • Network Misconfiguration when adding first host to new vSphere cluster

    - by dunxd
    I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

    Read the article

  • Alternative software for Pinnacle PCTV 100e

    - by Stijn Sanders
    I have a Pinnacle PCTV 100e external USB cable television receiver. I've been using Pinnacle's software that came with the card (TVCenter Pro) to record things at given times. Things I don't like is an extremely high CPU load, and that it doesn't seem to halt the screensaver from running when watching in full screen. Also, I was away the last two weeks, and the schedules went terribly bust. Some items were recorded hours before or after the actual scheduled time (and now I missed some shows), and some recurring schedules weren't converted into the next occurrence correctly! Is there good alternative software that would work with my PCTV 100e? (Preferalby cheap or free) I've tried VLC Player, which gets video, but no audio. I've tried MediaPortal, which crashes when trying to scan for channels. When I select a channel manually, the stored mpg has big errors in encoding and is also missing audio. There's VirtualDub, but that doesn't have ready-made scheduled-recording options. This I can conjure some scheduled scripts for, but I've noticed the sync gets awfully wrong after some time. I've tried Windows Media Center, but it doesn't seem to support the PCTV 100e.

    Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >